Untuk Kegunaan UKM sahaja
For UKM use only
Shahrir Abdullah adalah profesor di Jabatan Kejuruteraan Mekanikal dan Pembuatan, Fakulti Kejuruteraan dan Alam Bina, Universiti Kebangsaan Malaysia (UKM). Beliau memperoleh ijazah kedoktorannya daripada University of Wales Swansea pada tahun 1997 di dalam bidang Dinamik Bendalir Berkomputer (CFD). Beliau pernah memegang jawatan Pengarah Pusat Jaminan Kualiti, UKM sejak tahun penubuhannya iaitu 2011 hingga 2018 selama tiga penggal sebelum dilantik menjadi Dekan FKAB pada tahun 2018 hingga 2021. Beliau juga pernah memimpin Jaringan Jaminan Kualiti Institusi Pendidikan Tinggi Malaysia (MyQAN) sebagai President Pengasas selama dua penggal daripada tahun 2014 hingga 2018, serta mewakili Malaysia di dalam Majlis AUN-QA sejak tahun 2015 hingga 2018 juga selama dua penggal. Di peringkat kebangsaan dan antarabangsa, beliau pernah dilantik sebagai Timbalan Pengerusi Majlis AUN-QA pada tahun 2018-2023, dan Pengerusi Jawatankuasa Perancangan Strategik dan Pengukuhan Kursus Matapelajaran Pengajian Umum (MPU) di Kementerian Pendidikan Tinggi sejak 2017.
Shahrir Abdullah is a professor at the Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM). He obtained his doctorate degree from the University of Wales Swansea in 1997 in the field of Computational Fluid Dynamics (CFD). He was appointed as Director of the Centre for Quality Assurance, UKM since its inception in 2011 until 2018 for three terms before being appointed as Dean of the Faculty of Engineering and Built Environment, UKM until 2021. He was also elected as the Founding President of the Malaysian Higher Education Institutions Quality Assurance Network (MyQAN) for two terms from 2014 until 2018, and represented Malaysia in the AUN-QA Council from 2015 until 2018, also for two terms. At the national and international levels, he was appointed as the Deputy Chair of the AUN-QA Council in 2018-2023, and now holds the position as the Chair of the Committee for Strategic Planning and Strengthening of General Education Courses (MPU) since 2017.
Doktor Falsafah , UNIV. OF WALES, SWANSEA, UK , 1997 |
Sarjana , UNIV. OF WALES, SWANSEA, UK , 1994 |
Sarjana Muda , UKM , 1992 |
TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (Direct Injection Engine Design) |
TECHNOLOGY AND ENGINEERING - ENERGY (Computational Fluid Dynamics) |
TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (Magnetohydrodynamics and Nanofluids) |
Izamarlina Asshaari, Alias Jedi, Shahrir Abdullah. (2023). Brownian Motion And Thermophoresis Effects In Coflowing Carbon Nanotubes Towards A Moving Plate. - Results In Physics. 1-10. |
Nur Syahirah M.hanafi, Wan Aizon W.ghopa, Rozli Zulkifli, Shahrir Abdullah, Zambri Harun, Mohd Radzi Abumansor. (2022). Numerical Simulation On The Effectiveness Of Hybrid Nanofluid In Jet Impingement Cooling Application. - Energy Report. 764-775. |
Li Qiao, Shahrir Abdullah, Shahrir, Mohammad Rasidi Mohammad Rasani. (2022). A Review Of Progress And Hydrodynamic Design Of Integrated Motor Pump-jet Propulsion. - Applied Sciences. 1-29. |
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Asmaa Soheil Najm, Noor Humam Sulaiman. (2019). Impact Of The Tio2 Nanosolution Concentration On Heat Transfer Enhancement Of The Twin Impingement Jet Of A Heated Aluminum Plate. - Micromachines. 1-22. |
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa. (2018). Experimental And Numerical Simulation Of The Heat Transfer Enhancement On The Twin Impingement Jet Mechanism. - Energies. . |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian. (2017). A Review Of Combustion-driven Thermoelectric (te) And Thermophotovoltaic (tpv) Power Systems. - Renewable And Sustainable Energy Reviews. 572-584. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian. (2016). Comparative Assessment Of A Porous Burner Using Vegetable Cooking Oil-kerosene Fuel Blends For Thermoelectric And Thermophotovoltaic Power Generation. - Fuel. 137-147. |
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali. (2016). Effect Of Fuel Injection Timings On Performance And Emissions Of Stratified Combustion Cngdi Engine. - Applied Thermal Engineering. 619-629. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian, A.k. Ismail. (2015). Experimental Investigation Of The Performance Of A Liquid Fuel-fired Porous Burner Operating On Kerosene-vegetable Cooking Oil (vco) Blends For Micro-cogeneration Of Thermoelectric Power. - Renewable Energy. 505-516. |
Hyder H. Balla, Shahrir Abdullah, Wan Mahmood Wan Mohd Faizal, Rozli Zulkifli, Kamaruzaman Sopian. (2015). Enhancement Of Heat Transfer Coefficient Multi-metallic Nanofluid With Anfis Modeling For Thermophysical Properties. - Thermal Science. 1613-1620. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian. (2015). Experimental Analysis Of A Porous Burner Operating On Kerosene-vegetable Cooking Oil Blends For Thermophotovoltaic Power Generation. - Energy Conversion And Management. 544-560. |
Kareem Z.s., Abdullah S., Lazim T.m., Mohd Jaafar M.n., Abdul Wahid A.f.. (2015). Heat Transfer Enhancement In Three-start Spirally Corrugated Tube: Experimental And Numerical Study. - Chemical Engineering Science. 746-757. |
Zaid S. Kareem, M.n. Mohd Jaafar, Tholudin M. Lazim, Shahrir Abdullah, Ammar F. Abdulwahid. (2015). Passive Heat Transfer Enhancement Review In Corrugation. - Experimental Thermal And Fluid Science. 22-38. |
Ali Ahmed Gitan,rozli Zulkifli,shahrir Abdullah,kamaruzzaman Sopian. (2014). Development Of Pulsating Twin Jets Mechanism For Mixing Flow Heat Transfer Analysis. - The Scientific World Journal. 2014;1-8. |
Ali Ghadianlou, Shahrir Abdullah. (2013). Crashworthiness Design Of Vehicle Side Door Beams Under Low-speed Pole Side Impacts. - Thin-walled Structures. 67:25-33. |
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian. (2013). Numerical Study Of The Enhancement Of Heat Transfer For Hybrid Cuo-cu Nanofluids Flowing In A Circular Pipe. - Journal Of Oleo Science. 62(7):533-539. |
Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim & Kamaruzzaman Sopian. (2013). Reducing Entropy Generation In Mhd Fluid Flow Over Open Parallel Microchannels Embedded In A Micropatterned Permeable Surface. - Entropy. 15(11):4822-4843. |
Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim And Kamaruzzaman Sopian. (2012). Entropy Generation Analysis Of Open Parallel Microchannels Embedded Within A Permeable Continuous Moving Surface: Application To Magnetohydrodynamics (mhd). - Entropy. 14(1):1-23. |
M.h. Yazdi, S. Abdullah, I. Hashim, K. Sopian. (2011). Slip Mhd Liquid Flow And Heat Transfer Over Non-linear Permeable Stretching Surface With Chemical Reaction. - International Journal Of Heat And Mass Transfer. 54(15-16):3214-3225. |
M.a. Mussa, S. Abdullah, C.s. Nor Azwadi, N. Muhamad. (2011). Simulation Of Natural Convection Heat Transfer In An Enclosure By The Lattice-boltzmann Method. - Computers & Fluids. 44(1):162-168. |
Hassan, M.h.,kalam, M.a. ,mahlia, T.m.i.,aris, I.,nizam, M.k.,abdullah, S.,ali, Y.. (2009). Experimental Test Of A New Compressed Natural Gas Direct Injection Engine. - Energy And Fuels. 23(10):4981-4987. |
Saadah Ahmad Sowi, Shahrir Abdullah, Kamaruzzaman Sopian. (2021). The Effect Of Linearly Increasing/decreasing Pitch Ratio Twisted Tape With Various Progression Rate And Nanofluid Towards The System Performance. - Thermal Science And Engineering Progress. 1-16. |
Mahir Faris Abdullah, Rozli Zulkifli, Hazim Moria, Asmaa Soheil Najm, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Noor Humam Sulaiman. (2021). Assessment Of Tio2 Nanoconcentration And Twin Impingement Jet Of Heat Transfer Enhancement-a Statistical Approach Using Response Surface Methodology. - Energies. 1-29. |
Saadah Ahmad, Shahrir Abdullah And Kamaruzzaman Sopian. (2020). A Review On The Thermal Performance Of Nanofluid Inside Circular Tube With Twisted Tape Inserts. - Advances In Mechanical Engineering. 1-26. |
Javad Zareei, Abbas Rohani, Wan Mohd Faizal Bin Wan Mahmood, Shahrir Abdullah. (2020). Effect Of Ignition Timing And Hydrogen Fraction In Natural Gas Blend On Performance And Exhaust Emissions In A Di Engine. - Iranian Journal Of Science And Technology, Transactions Of Mechanical Engineering. 737-747. |
Saadah Ahmad, Shahrir Abdullah And Kamaruzzaman Sopian. (2020). Numerical And Experimental Analysis Of The Thermal Performances Of Sic/water And Al2o3/water Nanofluid Inside A Circular Tube With Constant-increased-pr Twisted Tape. - Energies. 1-24. |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2019). Study On Soot Mass Fraction And Size Distribution In A Direct Injection Diesel Engine Using Particulate Size Mimic Soot Model. - Journal Of Thermal Science And Engineering Applications. . |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias. (2017). Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser. - Industrial Lubrication And Tribology. 409-413. |
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali. (2016). The Effect Of Injection Timings On Performance And Emissions Of Compressed Natural-gas Direct Injection Engine. - Journal Of Combustion. 1-7. |
Aripin M.a., Sajuri Z., Abdullah S., Omar M.z., Zamri W.f.h., Jamil W.n.m., Abdullah M.f.. (2016). Microscale Groove Effect On Shear Strength Of Epoxy-bonded Dissimilar Metal Plate. - Journal Of Adhesion Science And Technology. 2001-2012. |
L. H. Jawad, S. Abdullah, R. Zulkifli, W. M. F. W. Mahmood. (2014). Numerical Study On The Effect Of Interaction Vaned Diffuser With Impeller On The Performance Of A Modified Centrifugal Compressor. - Journal Of Mechanics. 30(2): 113-122. |
Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian. (2013). Effect Of Reynolds Number On Heat Transfer And Flow For Multi-oxide Nanofluids Using Numerical Simulation. - Research On Chemical Intermediates. 39(5):2197-2210. |
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian. (2013). Modelling And Measuring The Thermal Conductivity Of Multi-metallic Zn/cu Nanofluid. - Research On Chemical Intermediates. 39(6):2801-2815. |
S. Abdullah, W.h. Kurniawan, M. Khamas And Y. Ali. (2011). Emission Analysis Of A Compressed Natural Gas Direct-injection Engine With A Homogenous Mixture. - International Journal Of Automotive Technology. 12(1): 29-38. |
Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim And Kamaruzzaman Sopian. (2011). Effects Of Viscous Dissipation On The Slip Mhd Flow And Heat Transfer Past A Permeable Surface With Convective Boundary Conditions. - Energies. 4: 2273-2294. |
Y.m. Asri, E.a. Azrulhisham, A.w. Dzuraidah, A. Shahrir, A. Shahrum And Z. Azami. (2011). Fatigue Life Reliability Prediction Of A Stub Axle Using Monte Carlo Simulation. - International Journal Of Automotive Technology. 12(5):713-719. |
Izamarlina Asshaari, Alias Jedi, Shahrir Abdullah. (2023). Brownian Motion And Thermophoresis Effects In Coflowing Carbon Nanotubes Towards A Moving Plate. - Results In Physics. 1-10. |
Nur Syahirah M.hanafi, Wan Aizon W.ghopa, Rozli Zulkifli, Shahrir Abdullah, Zambri Harun, Mohd Radzi Abumansor. (2022). Numerical Simulation On The Effectiveness Of Hybrid Nanofluid In Jet Impingement Cooling Application. - Energy Report. 764-775. |
Li Qiao, Shahrir Abdullah, Shahrir, Mohammad Rasidi Mohammad Rasani. (2022). A Review Of Progress And Hydrodynamic Design Of Integrated Motor Pump-jet Propulsion. - Applied Sciences. 1-29. |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2021). Cngdi Engine Performance Using A Vaned Diffuser Turbocharger Compressor With Varying Injection Timings. - Evergreen Joint Journal Of Novel Carbon Resource Sciences & Green Asia Strategy. 414-420. |
Mahir Faris Abdullah, Rozli Zulkifli, Hazim Moria, Asmaa Soheil Najm, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Noor Humam Sulaiman. (2021). Assessment Of Tio2 Nanoconcentration And Twin Impingement Jet Of Heat Transfer Enhancement-a Statistical Approach Using Response Surface Methodology. - Energies. 1-29. |
Saadah Ahmad Sowi, Shahrir Abdullah, Kamaruzzaman Sopian. (2021). The Effect Of Linearly Increasing/decreasing Pitch Ratio Twisted Tape With Various Progression Rate And Nanofluid Towards The System Performance. - Thermal Science And Engineering Progress. 1-16. |
Saadah Ahmad, Shahrir Abdullah And Kamaruzzaman Sopian. (2020). A Review On The Thermal Performance Of Nanofluid Inside Circular Tube With Twisted Tape Inserts. - Advances In Mechanical Engineering. 1-26. |
Zambri Harun, Tajul Ariffin Norizan, Shahrir Abdullah, Mazharul Islam. (2020). Subsurface Vortex Control Parametric Study At Submersible Pump Intake Using Plate-type Floor Splitters. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 73-80. |
Javad Zareei, Abbas Rohani, Wan Mohd Faizal Bin Wan Mahmood, Shahrir Abdullah. (2020). Effect Of Ignition Timing And Hydrogen Fraction In Natural Gas Blend On Performance And Exhaust Emissions In A Di Engine. - Iranian Journal Of Science And Technology, Transactions Of Mechanical Engineering. 737-747. |
Saadah Ahmad, Shahrir Abdullah And Kamaruzzaman Sopian. (2020). Numerical And Experimental Analysis Of The Thermal Performances Of Sic/water And Al2o3/water Nanofluid Inside A Circular Tube With Constant-increased-pr Twisted Tape. - Energies. 1-24. |
Mahir Faris Abdullah, Humam Kareem, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon W. Ghopa. (2019). Heat Transfer And Flow Structure Of Multiple Jet Impingement Mechanisms On A Flat Plate For Turbulent Flow. - International Journal Of Mechanical And Mechatronics Engineering. 141-160. |
Tajul Ariffin Norizan, Zambri Harun, Shahrir Abdullah, Wan Hanna Melini Wan Mohtar. (2019). Effects Of Floor Splitter Height On The Effectiveness Of Swirl Angle Reduction In Pump Intake. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 32-39. |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2019). Study On Soot Mass Fraction And Size Distribution In A Direct Injection Diesel Engine Using Particulate Size Mimic Soot Model. - Journal Of Thermal Science And Engineering Applications. . |
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Asmaa Soheil Najm, Noor Humam Sulaiman. (2019). Impact Of The Tio2 Nanosolution Concentration On Heat Transfer Enhancement Of The Twin Impingement Jet Of A Heated Aluminum Plate. - Micromachines. 1-22. |
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa, Ashraf Amer Abbas. (2018). Heat Transfer Augmentation Based On Twin Impingement Jet Mechanism. - International Journal Of Engineering & Technology. . |
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon Wan Ghopa. (2018). Experimental And Numerical Simulation Of The Heat Transfer Enhancement On The Twin Impingement Jet Mechanism. - Energies. . |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias. (2018). Investigation Of The Pressure Ratio And Efficiency Of A Turbocharger Centrifugal Compressor With A Vaned Diffuser. - World Review Of Science, Technology And Sustainable Development. . |
Abdullah, M.f., Zulkifli, R., Harun, Z., Abdullah, S., Ghopa, W.a.w., Abbas, A.a.. (2017). Experimental Investigation On Comparison Of Local Nusselt Number Using Twin Jet Impingement Mechanism. - International Journal Of Mechanical And Mechatronics Engineering. 60-75. |
Sim, J.s.t., Zulkifli, R., Abdullah, S., Harun, Z.. (2017). Analysis Of Boost Conversion Process For A Thermoelectric Module. - International Journal Of Advanced Mechatronic Systems. 144-150. |
Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon W.ghopa. (2017). Studying Of Convective Heat Transfer Over An Aluminum Flat Plate Based On Twin Jets Impingement Mechanism For Different Reynolds Number. - International Journal Of Mechanical & Mechatronics Engineering (ijmme) The International Journals Of Engineering And Sciences (ijens). 1-16. |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Mohd Fadzli Bin Abdollah, Rizalman Mamat, Azri Alias. (2017). Effect Of Vaned Diffuser On The Performance Of Small Turbocharger. - Journal Of Mechanical Engineering. 227-236. |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2017). Comparison Of Simple And Detailed Soot Models In The Study Of Soot Formation In A Compression Ignition Diesel Engine. - Sae International. 1-9. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian. (2017). A Review Of Combustion-driven Thermoelectric (te) And Thermophotovoltaic (tpv) Power Systems. - Renewable And Sustainable Energy Reviews. 572-584. |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias. (2017). Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser. - Industrial Lubrication And Tribology. 409-413. |
F. Ibrahim, W.m.f. Wan Mahmood, S. Abdullah And M.r. Abu Mansor. (2016). Numerical Investigation Of Soot Mass Concentration In Compression Ignition Diesel Engine. - Journal Of Mechanical Engineering And Sciences (jmes). 2275-2287. |
Muhamed M.n., Omar M.z., Abdullah S., Sajuri Z., Zamri W.f.h., Rahman M.a.i.a., Abdullah M.f.. (2016). Investigation On Brazing Interface Bonding Characteristic Of Aa7075 And Aa6061 Aluminum Alloy With Ar500 Steel Using Al-si-zn Filler Metal. - Jurnal Teknologi. 129-135. |
Samsudin M., Omar M.z., Abdullah S.. (2016). Effects Of Rheocasting And Thixoforming On The Microstructure And Mechanical Properties Of A356 Aluminium Alloy. - Jurnal Teknologi. 107-113. |
Fatah O. Al Ghuol, K. Sopian, And Shahrir Abdullah. (2016). Enhancement Of Integrated Solar Collector With Spherical Capsules Pcm Affected By Additive Aluminum Powder. - Journal Of Thermodynamics. 1-7. |
Rahman M.a.i.a., Omar M.z., Abdullah S., Sajuri Z., Zamri W.f.h., Muhamed M.n., Abdullah M.f.. (2016). Effects Of Wetting Time On Properties Of Steel-aluminium Brazed Joint. - Jurnal Teknologi. 51-55. |
Aripin M.a., Sajuri Z., Abdullah S., Omar M.z., Zamri W.f.h., Jamil W.n.m., Abdullah M.f.. (2016). Microscale Groove Effect On Shear Strength Of Epoxy-bonded Dissimilar Metal Plate. - Journal Of Adhesion Science And Technology. 2001-2012. |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2016). Soot Particle Measurement In Engine Cylinder: A Review. - Jurnal Teknologi. 187-195. |
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali. (2016). Effect Of Fuel Injection Timings On Performance And Emissions Of Stratified Combustion Cngdi Engine. - Applied Thermal Engineering. 619-629. |
Zambri Harun, Wan Aizon W. Ghopa, Shahrir Abdullah, M. Izhar Ghazali, Ashraf Amer Abbas, Mohd Rasidi Rasani, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor, Zulkhairi Zainol Abidin. (2016). The Development Of A Multi Purpose Wind Tunnel. - Jurnal Teknologi. 63-70. |
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Fadzli Ibrahim, Shahrir Abdullah, Kamaruzzaman Sopian. (2016). Numerical Study Of Hydrogen Fuel Combustion In Compression Ignition Engine Under Argon-oxygen Atmosphere. - Jurnal Teknologi. 77-83. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian. (2016). Comparative Assessment Of A Porous Burner Using Vegetable Cooking Oil-kerosene Fuel Blends For Thermoelectric And Thermophotovoltaic Power Generation. - Fuel. 137-147. |
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali. (2016). The Effect Of Injection Timings On Performance And Emissions Of Compressed Natural-gas Direct Injection Engine. - Journal Of Combustion. 1-7. |
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali. (2016). Comparative Analysis Of Performance And Emission Of A Homogenous Combustion Compressed Natural-gas Direct Injection Engine. - International Journal Of Mechanical & Mechatronics Engineering. 173-183. |
Zaid S. Kareem, M.n. Mohd Jaafar, Tholudin M. Lazim, Shahrir Abdullah, Ammar F. Abdulwahid. (2015). Heat Transfer Enhancement In Two-start Spirally Corrugated Tube. - Alexandria Engineering Journal. 415-422. |
Hyder H. Balla, Shahrir Abdullah, Wan Mahmood Wan Mohd Faizal, Rozli Zulkifli, Kamaruzaman Sopian. (2015). Enhancement Of Heat Transfer Coefficient Multi-metallic Nanofluid With Anfis Modeling For Thermophysical Properties. - Thermal Science. 1613-1620. |
Jason Sim, Rozli Zulkifli, Shahrir Abdullah, Zambri Harun. (2015). Voltage Stabilization Of Thermoelectric Modules Using A Boost Converter. - International Journal Of Mechanical & Mechatronics Engineering. 115-122. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian, A.k. Ismail. (2015). Experimental Investigation Of The Performance Of A Liquid Fuel-fired Porous Burner Operating On Kerosene-vegetable Cooking Oil (vco) Blends For Micro-cogeneration Of Thermoelectric Power. - Renewable Energy. 505-516. |
K.f. Mustafa, S. Abdullah, M.z. Abdullah, K. Sopian. (2015). Experimental Analysis Of A Porous Burner Operating On Kerosene-vegetable Cooking Oil Blends For Thermophotovoltaic Power Generation. - Energy Conversion And Management. 544-560. |
K.f. Mustafa, S. Abdullah, M. Z. Abdullah, And K. Sopian. (2015). Combustion Characteristics Of Butane Porous Burner For Thermoelectric Power Generation. - Journal Of Combustion. 1-13. |
Zaid S. Kareem, M.n. Mohd Jaafar, Tholudin M. Lazim, Shahrir Abdullah, Ammar F. Abdulwahid. (2015). Passive Heat Transfer Enhancement Review In Corrugation. - Experimental Thermal And Fluid Science. 22-38. |
Kareem Z.s., Jaafar M.n.m., Lazim T.m., Abdullah S., Abdulwahid A.f.. (2015). Heat Transfer Enhancement Comparisons In Different Tube Shapes. - International Review On Modelling And Simulations. 232-238. |
Mohd Rashdan Awang, Rozli Zulkifli And Shahrir Abdullah. (2015). Minichannel Lcp For Ev Battery Cooling: Effect Of Fin Spacing. - International Journal Of Mechanical & Mechatronics Engineering. 68-73. |
Mohd Radzi Abu Mansor; Tan Chun Hyiin; Nik Muhammad Hafiz; Wan Mohd Faizal Wan Mahmood; W Ghopa Wan Aizon; Shahrir Abdullah. (2015). Fundamental Study On Combustion Characteristics Of Direct Injection Gaseous Fuel. - Arpn Journal Of Engineering And Applied Sciences. 7375-7379. |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2015). A Review Of Soot Particle Measurement In Lubricating Oil. - Defense S&t Technical Bulletin. 141-152. |
Fatah. O. Al Ghuol, K.sopian, Shahrir Abdullah, Mohammed Al-ghoul & Ali Whaad. (2015). Heat Transfer Enhancement Techniques For Solar Air Collector Hater A Review. - Modern Applied Science. 20-34. |
Wan Noorina Wan Ahmad, Loh Wayen, Teh Lay Ann, S Kanagasingam, Shahrir Abdullah, M.m.rahman. (2015). Irrigant Flow In Micro-computed Tomography Scanned Root Canals Using Computational Fluid Dynamics Model. - Journal Of Medical Sciences. 192-197. |
Helmisyah Ahmad Jalaludin, Mohd Ruysdi Ramliy, Nik Rosli Abdullah, Salmiah Kasolang, Shahrir Abdullah, Asiah Abd Rahim, Zeno Michael. (2015). Investigation On Characteristics Of Pome Blended Diesel Engine. - Jurnal Teknologi. 1-5. |
Kareem Z.s., Abdullah S., Lazim T.m., Mohd Jaafar M.n., Abdul Wahid A.f.. (2015). Heat Transfer Enhancement In Three-start Spirally Corrugated Tube: Experimental And Numerical Study. - Chemical Engineering Science. 746-757. |
Saad Aljamali, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah And Yusoff Ali. (2014). Comparison Of Performance And Emission Of A Gasoline Engine Fuelled By Gasoline And Cng Under Various Throttle Positions. - Journal Of Applied Sciences. 14(4): 386-390. |
L. H. Jawad, S. Abdullah, R. Zulkifli, W. M. F. W. Mahmood. (2014). Numerical Study On The Effect Of Interaction Vaned Diffuser With Impeller On The Performance Of A Modified Centrifugal Compressor. - Journal Of Mechanics. 30(2): 113-122. |
Javad Zareei, Faizal Wan Mahmood, Shahrir Abdullah, Yusoff Ali, Taib Iskandar Mohamed. (2014). Prediction Of Performance A Direct Injection Engine Fueled With Natural Gas-hydrogen Blends. - International Journal Of Mechanical And Mechatronics Engineering. 14(2):1-8. |
Ali Ahmed Gitan,rozli Zulkifli,shahrir Abdullah,kamaruzzaman Sopian. (2014). Development Of Pulsating Twin Jets Mechanism For Mixing Flow Heat Transfer Analysis. - The Scientific World Journal. 2014;1-8. |
Javad Zareei, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Yusoff Ali. (2014). Effect Of Hydrogen On Natural Gas Fueled Direct Injection Engine, A Theoretical Study. - Australian Journal Of Basic And Applied Sciences. 8-13. |
A. Shamsudeen, S. Abdullah, A.k. Ariffin, M.r.m. Rasani And Y. Ali. (2014). Design And Simulation Of A Cylinder Head Structure For A Compressed Natural Gas Direct Injection Engine. - International Journal Of Automotive And Mechanical Engineering. 9:1620-1629. |
Zaliha Wahid, Norhamidi Muhamad, Shahrir Abdullah, Jaharah A. Ghani. (2014). The Influence Of Temperature Dependant Parameters In Plastic 0.0nd Metal Injection Molding Using Taguchi Method. - Jurnal Teknologi. 51-56. |
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian. (2013). Numerical Study Of The Enhancement Of Heat Transfer For Hybrid Cuo-cu Nanofluids Flowing In A Circular Pipe. - Journal Of Oleo Science. 62(7):533-539. |
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian. (2013). Modelling And Measuring The Thermal Conductivity Of Multi-metallic Zn/cu Nanofluid. - Research On Chemical Intermediates. 39(6):2801-2815. |
B. Daryakenari, S. Abdullah, R. Zulkifli, E. Sundararajan, A. B. Mohd Sood. (2013). Numerical Study Of Flow Over Ahmed Body And A Road Vehicle And The Change In Aerodynamic Characteristics Caused By Rear Spoiler. - International Journal Of Fluid Mechanics Research. 40(4):354-372. |
Ali Ghadianlou, Shahrir Abdullah. (2013). Crashworthiness Design Of Vehicle Side Door Beams Under Low-speed Pole Side Impacts. - Thin-walled Structures. 67:25-33. |
Behrang Daryakenari, Shahrir Abdullah, Rozli Zulkifli. (2013). Reducing Vehicle Drag Force Through A Tapered Rear Side Wall. - Sae International Journal Of Commercial Vehicles. 6(2):582-588. |
Layth H. Jawad, S. Abdullah, R. Zulkifli, And W.m.f.w. Mahmood. (2013). Numerical Investigation On The Effect Of Impeller Trimming On The Performance Of A Modified Compressor. - Cfd Letters. 5(4):174-178. |
Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim & Kamaruzzaman Sopian. (2013). Reducing Entropy Generation In Mhd Fluid Flow Over Open Parallel Microchannels Embedded In A Micropatterned Permeable Surface. - Entropy. 15(11):4822-4843. |
Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian. (2013). Effect Of Reynolds Number On Heat Transfer And Flow For Multi-oxide Nanofluids Using Numerical Simulation. - Research On Chemical Intermediates. 39(5):2197-2210. |
Jawad, L.h., Abdullah, S., Zulkifli, R., Mahmood, W.m.f.w.. (2012). Modelling Of Centrifugal Compressor Impellers Using Adaptive Neuro- Fuzzy Inference Systems (anfis). - International Review Of Mechanical Engineering. 6(5):1011-1017. |
Rozli Zulkifli, Ali Ahmed Gitan, Kamaruzzaman Sopian, Shahrir Abdullah. (2012). Multiple Pulsating Jets Mechanism For Heat Transfer Enhancement. - International Review Of Mechanical Engineering. 6(3):654-658. |
A. Azraf, Shahrir Abdullah, Kamaruzzaman Sopian. (2012). Cooling Profile Of Beryllium Filter For Small Angle Neutron Scattering Cryostat Using Cfd. - International Review Of Mechanical Engineering. 6(2):251-255. |
Hyder H. Balla, Shahrir Abdullah, Rozli Zulkifli, Wan Mohd Faizal And Kamaruzzaman Sopian. (2012). Effect Of Oxides Nanoparticle Materials On The Pressure Loss And Heat Transfer Of Nanofluids In Circular Pipes. - Journal Of Applied Sciences. 12(13):1396-1401. |
B. Daryakenari, S. Abdullah, R. Zulkifli, A. Shamsudeen. (2012). Numerical Study Of Multiple Channel Road Vehicle Underbody Diffusers. - International Review Of Mechanical Engineering. 6(3):583-587. |
Layth H. Jawad, S. Abdullah, R. Zulkifli And W.m.f.w. Mahmood. (2012). Numerical Simulation Of Flow Inside A Modified Turbocharger Centrifugal Compressor. - Asian Journal Of Applied Sciences. 5(8):563-572. |
Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim And Kamaruzzaman Sopian. (2012). Entropy Generation Analysis Of Open Parallel Microchannels Embedded Within A Permeable Continuous Moving Surface: Application To Magnetohydrodynamics (mhd). - Entropy. 14(1):1-23. |
B. Daryakenari, S. Abdullah, R. Zulkifli, E. Sundararajan, A. B. Mohd Sood. (2012). Reducing The Aerodynamic Forces Through A Rear Spoiler. - International Review On Modelling And Simulations. 5(6): 2512-2517. |
Jawad, L.h., Abdullah, S., Zulkifli, R., Mahmood, W.m.f.w.. (2012). Prediction Of Centrifugal Compressor Performance By Using Adaptive Neuro-fuzzy Inference System (anfis). - International Review On Modelling And Simulations. 5(4):1580-1587. |
S. Abdullah, W.h. Kurniawan, M. Khamas And Y. Ali. (2011). Emission Analysis Of A Compressed Natural Gas Direct-injection Engine With A Homogenous Mixture. - International Journal Of Automotive Technology. 12(1): 29-38. |
A.j. Helmisyah, S. Abdullah, M.j. Ghazali. (2011). Structure Integrity Analysis Of Piston Crown Against Thermal Stress For Compressed Natural Gas Direct Injection Engine. - Engineering E-transaction. 6(2):169-174. |
Y.m. Asri, E.a. Azrulhisham, A.w. Dzuraidah, A. Shahrir, A. Shahrum And Z. Azami. (2011). Fatigue Life Reliability Prediction Of A Stub Axle Using Monte Carlo Simulation. - International Journal Of Automotive Technology. 12(5):713-719. |
M.a. Mussa, S. Abdullah, C.s. Nor Azwadi, R. Zulkifli. (2011). Lattice Boltzmann Simulation Of Cavity Flows At Various Reynolds Numbers. - International Review On Modelling And Simulations. 4(4):1909-1919. |
Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim And Kamaruzzaman Sopian. (2011). Effects Of Viscous Dissipation On The Slip Mhd Flow And Heat Transfer Past A Permeable Surface With Convective Boundary Conditions. - Energies. 4: 2273-2294. |
M.a. Mussa, S. Abdullah, C.s. Nor Azwadi, N. Muhamad. (2011). Simulation Of Natural Convection Heat Transfer In An Enclosure By The Lattice-boltzmann Method. - Computers & Fluids. 44(1):162-168. |
M.h. Yazdi, S. Abdullah, I. Hashim, K. Sopian. (2011). Slip Mhd Liquid Flow And Heat Transfer Over Non-linear Permeable Stretching Surface With Chemical Reaction. - International Journal Of Heat And Mass Transfer. 54(15-16):3214-3225. |
Md Isa Ali, Shahrir Abdullah, Taib Iskandar Mohamad. (2011). Performance Of Untreated Waste Cooking Oil Blends In A Diesel Engine. - International Journal On Advanced Science, Engineering And Information Technology. 1(5):523-527. |
Taib Iskandar Mohamad, How Heoy Geok, Shahrir Abdullah. (2011). Effects Of Open-valve And Close-valve Injections On The Performance Of A Port Injection Methane Engine. - International Journal On Advanced Science, Engineering And Information Technology. 1(5):528-533. |
F.y. Lim, S. Abdullah And I. Ahmad. (2010). Numerical Study Of Fluid Flow And Heat Transfer In Microchannel Heat Sinks Using Anisotropic Porous Media Approximation. - Journal Of Applied Sciences. 10(18):2047-2057. |
Nopiah Z.m., Baharin M.n., Abdullah S., Khairir M.i.. (2010). The Detection Of Abrupt Changes For Variable Amplitude Fatigue Loading By Using Running Damage Extraction Method. - Journal Of Applied Sciences. 10(7):544-550. |
R. Zulkifli, K. Sopian, S. Abdullah, M. S. Takriff. (2010). Analysis Of Pulse Air Jet Flow Profiles. - International Review Of Mechanical Engineering. 4(5):495-501. |
S. Abdullah, E. Adril, A. Muchtar And A.k. Ariffin. (2010). Friction Reduction In Compressed Natural Gas Direct Injection Engine Using Piston Rings With Diffusion Chromium Coating. - Journal Of Applied Sciences. 10(6):462-470. |
Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah, Mohd Sobri Takriff. (2009). Comparison Of Local Nusselt Number For Steady And Pulsating Circular Jet At Reynolds Number Of 16000. - European Journal Of Scientific Research. 29(3):369-378. |
M.h. Yazdi, S. Abdullah, I. Hashim, K. Sopian, A. Zaharim. (2009). Entropy Generation Analysis Of Liquid Fluid Past Embedded Open Parallel Microchannels Within The Surface. - European Journal Of Scientific Research. 28(3):462-470. |
Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah, Mohd Sobri Takriff. (2009). Correlations Of Percentage Increases In Local Nusselt Number With Radial Distance For Steady And Pulsating Jet. - International Review Of Mechanical Engineering. 3(5): 613-618. |
M.a. Kalam, H.h. Masjuki, M. Redzuan, T. I. Mahlia, M. A.fuad, M. Mohibah, K.h. Halim, A. Ishak, M. Khair, A. Shahrir And A. Yusoff. (2009). Development And Test Of A New Catalytic Converter For Natural Gas Fuelled Engine. - Sadhana Academy Proceedings In Engineering Sciences. 34(3):467-481. |
Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah And Mohd Sobri Takriff. (2009). Comparison Of Local Nusselt Number Between Steady And Pulsating Jet At Different Jet Reynolds Number. - Wseas Transactions On Environment And Development. 5(5):384-393. |
Abdullah S., Rahmat R.a.a.o.k., Zaharim A., Muhamad N., Deros B.m., Kofli N.t., Abdullah M., Mohd. Tahir M., Muchtar A., Azhari C.h.. (2009). Implementing Continual Review Of Programme Educational Objectives And Outcomes For Obe Curriculum Based On Stakeholders` Input. - European Journal Of Scientific Research. 29(1):89-99. |
Adril E., Abdullah S., Ariffin A.k., Muchtar A., Omar K.. (2009). Comparative Study Of Characteristic Of Lubricant Oils In Gasoline And Compressed Natural Gas Engines. - European Journal Of Scientific Research. 30(2):282-293. |
A. R. Ismail, Y. C. Soon, S. Abdullah, R. Zulkifli, K. Sopian, M.n.a. Rahman. (2009). Reverse Engineering In Fabrication Of Piston Crown. - European Journal Of Scientific Research. 29(1):136-146. |
Hassan, M.h.,kalam, M.a. ,mahlia, T.m.i.,aris, I.,nizam, M.k.,abdullah, S.,ali, Y.. (2009). Experimental Test Of A New Compressed Natural Gas Direct Injection Engine. - Energy And Fuels. 23(10):4981-4987. |
Mohammad Hosseini Fouladi, Mohd. Jailani Mohd. Nor, Ahmad Kamal Ariffin, Shahrir Abdullah. (2009). Inverse Combustion Force Estimation Based On Response Measurements Outside The Combustion Chamber And Signal Processing. - Mechanical Systems And Signal Processing. 23(8):2519-2537. |
How Heoy Geok, Taib Iskandar Mohamad, Shahrir Abdullah, Yusoff Ali, Azhari Shamsudeen, Elvis Adril. (2009). Experimental Investigation Of Performance And Emission Of A Sequential Port Injection Natural Gas Engine. - European Journal Of Scientific Research. 30(2):204-214. |
Wendy Hardyono Kurniawan And Shahrir Abdullah. (2008). Numerical Analysis Of The Combustion Process In A Four-stroke Compressed Natural Gas Engine With Direct Injection System. - Journal Of Mechanical Science And Technology. 22(10):1937-1944. |
W. H. Kurniawan, S. Abdullah. (2005). Cfd Prediction And Analysis Of Air Motion Flow Characteristics For Internal Combustion Engine. - Paksi J.. 8:17-26. |
Saadah Ahmad Sowi, Kamaruzzaman Sopian, Shahrir Abdullah. (2020). Turbulent Convective Heat Transfers Of Sic/water Through Circular Pipe Equipped With Modified Twisted Tape. - Proceedings Of Mechanical Engineering Research Day 2020, Pp. 381-382, December 2020. 381-382. |
Tajul Ariffin Norizan, Zambri Harun, Wan Hanna Melini Wan Mohtar, Shahrir Abdullah. (2019). Characteristics Of Swirl Angle In Pump Intake Flow Near The Minimum Inlet Submergence. - Asme-jsme-ksme 2019 8th Joint Fluids Engineering Conference (ajkfluids2019). 1-9. |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2017). Numerical Investigation On Soot Particles Emission In Compression Ignition Diesel Engine By Using Particulate Mimic Soot Model. - Matec Web Of Conferences: The 2nd International Conference On Automotive Innovation And Green Vehicle (aigev 2016). 1-11. |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Mansor & Mohd Fadzli Abdollah. (2017). Experimental Investigation Of Performance And Emissions Of A Stratified Charge Cng Direct Injection Engine With Turbocharger. - Matec Web Of Conferences Volume 124 (2017) 6th International Conference On Transportation And Traffic Engineering (ictte 2017). 1-5. |
Jason Sim, Rozli Zulkifli And Shahrir Abdullah. (2014). Conceptual Thermosyphonic Loop Cooled Thermoelectric Power Cogeneration System For Automotive Applications. - Applied Mechanics And Materials. 294-298. |
Muhammad Faiz Abdul Hamid, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor And Shahrir Abdullah. (2014). Public Perception And Acceptance Of Diesel-powered Passenger Cars In Malaysia : An Initial Study. - Applied Mechanics And Materials / Trans Tech Publications, Switzerland. 49-53. |
Ali Ahmed Gitan, Rozli Zulkifli, Kamaruzaman Sopian, Shahrir Abdullah. (2014). Twin Pulsating Jets Impingement Heat Transfer For Fuel Preheating In Automotives. - Applied Mechanics And Materials. 322-328. |
Helmisyah Ahmad Jalaludin, Shahrir Abdullah, Mariyam Jameelah Ghazali, Bulan Abdullah, Nik Rosli Abdullah. (2013). Effect Of Extreme Temperatures On Coated Piston Crown For Cngdi Engine. - Applied Mechanics And Materials - International Conference On Advances In Mechanical Engineering 2013. . |
Helmisyah Ahmad Jalaludin,*, Shahrir Abdullah, Mariyam Jameelah Ghazali, Bulan Abdullah, Nik Rosli Abdullah. (2013). Experimental Study Of Ceramic Coated Piston Crown For Compressed Natural Gas Direct Injection Engines. - Procedia Engineering - The Malaysian International Tribology Conference (mitc2013). . |
Mahathir Rahmany, Elankovan Sundararajan, Abdullah Mohd Zin, Shahrir Abdullah. (2013). Implementation Strategy For D2q9 Model On Desktop Grid Environment. - Procedia Technology - The 4th International Conference On Electrical Engineering And Informatics (iceei 2013). . |
Zambri Harun, Mohamad Dali Isa, Mohammad Rasidi Rasani And Shahrir Abdullah. (2012). The Effects Of Spatial Resolution In Turbulent Boundary Layers With Pressure Gradients. - Applied Mechanics And Materials : Aerotech Iv. . |
Lukeman Yusoff, Lim Fang Yau, Shahrir Abdullah, Rozli Zulkifli, Azhari Shamsudeen And Mohammad Khatim Hasan. (2012). Underhood Fluid Flow And Thermal Analysis For Passenger Vehicle. - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). . |
Yusoff Ali, Azhari Shamsudeen, Shahrir Abdullah And Wan Mohd Faizal Wan Mahmood. (2012). Development Of Cng Direct Injection (cngdi) Clean Fuel System For Extra Power In Small Engine.. - The 4th International Meeting On Advances In Thermofluids (imat 2011) , Universiti Teknologi Malaysia. . |
Wan Mohd Faizal W.m., Mohd Anas M.s., Mohd Faizal M.t., Azli A., Rozli Z., Nordin J., Sallehuddin M.h., Rizauddin R., Shahrum A., Shahrir A. And Azhari S.. (2012). Car Body And Chassis Development Of Ukm Carevo For Perodua Eco-challenge 2011. - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). . |
Javad Zareei, Yusoff Ali, Shahrir Abdullah And Faizal Wan Mahmood. (2012). Comparing The Effects Of Hydrogen Addition On Performance And Exhaust Emission In A Spark Ignition Fueled With Gasoline And Cng. - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). . |
Shahrir Abdullah, Azian Abd Latiff, Thomas Paraidathathu, Azizah Jaafar, Wan Noorina Wan Ahmad, Safinaz Mohd Hussein And Sity Daud. (2011). Gap Analysis Towards Harmonisation Of The Mqa Code Of Practice For Programme Accreditation With The Quality Management System Of Ms Iso 9001:2008. - Procedia - Social And Behavioral Sciences. . |
A.j. Helmisyah, S. Abdullah And M.j. Ghazali. (2011). Effect Of Thermal Barrier Coating On Piston Crown For Compressed Natural Gas With Direct Injection Engine. - 2011 1st International Conference On Mechanical Engineering, Icme 2011(applied Mechanics And Materials); Phuket. . |
M.h. Yazdi, S. Abdullah, I. Hashim, A. Zaharim And K. Sopian. (2011). Entropy Generation Analysis Of The Mhd Flow Over Nonlinear Permeable Stretching Sheet With Partial Slip. - 6th Iasme / Wseas International Conference On Energy & Environment (ee `11), Cambridge, Uk. . |
Yusoff Ali, Azhari Shamsudeen, Shahrir Abdullah And Abd Rashid Abd Aziz. (2011). The Effect Of Spray Angles Of The Injector On The Power Of Cngdi Engine. - The 4th International Meeting On Advances In Thermofluids (imat 2011) , Unitesiti Teknologi Malaysia. . |
Azizah Jaafar, Shahrir Abdullah, Azian Abd. Latif, Thomas Paraidathathu, Wan Noorina Wan Ahmad, Narimah Abdullah, Sity Daud, Juhana Salim And Chan Siew Lee. (2011). Reliability Of Student Feedback On The Course Teaching Evaluation System (ctes) And System Usability. - Procedia - Social And Behavioral Sciences. . |
Johari J., Sahari J., Abd Wahab D., Abdullah S., Abdullah S., Omar M.z., Muhamad N.. (2011). Difficulty Index Of Examinations And Their Relation To The Achievement Of Programme Outcomes. - Kongres Pengajaran Dan Pembelajaran Ukm, 2010; Tanjung Keling, Melaka. . |
Mussa, M.a., S. Abdullah, C.s.n. Azwadi And N. Muhamad. (2010). Cubic-interpolated-pseudo-particle Lattice Boltzmann Method For Simulation Of Natural Convection Heat Transfer In An Enclosure With Different Aspect Ratios. - The 2nd International Conference On Computer And Automation Engineering (iccae), Singapore. . |
M. Yahya, K. Sopian, M. Syahri, S. Abdullah, M.a. Alghoul And A. Zaharim. (2008). Cfd Analysis Of Solar Hot Water Heater With Integrated Storage System. - Proceedings Of The 7th Wseas International Conference On System Science And Simulation In Engineering (icossse `08). . |
N. Mariun, N. Md. Saad, M. F. Abas, N. Khan And S. Abdullah. (2007). Power And Energy Characteristics Of Continuous Waves / Pulsed Co2 Laser Application In Cng-di Ignition. - International Journal Of Energy. . |
Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Saad Aljamali & Azhari Shamsudeen. (2017). Advances In Natural Gas Emerging Technologies. - . 16. |
Prof. Ir. Dr. Shahrir Abdullah. (2012). Garis Panduan Penyediaan Dokumen Program Pengajian Universiti Kebangsaan Malaysia. - . 110. |
Ja`afar Sahari, Syazrin Aklili, Dzuraidah Abd Wahab, Ruhizan Mohd Yasin, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan, Shahrir Abdullah, Mohd Zaidi Omar, Norhamidi Muhamad. (2012). Mercu Kesarjanaan Pengajaran Dan Pembelajaran, Penyelidikan Tindakan Di Institusi Pengajian Tinggi. - . 175-189. |
Shahrir Abdullah Et Al.. (2011). Jaminan Kualiti Proses Pendidikan: Perspektif Ukm Sebagai Institusi Swaakreditasi Dan Universiti Penyelidikan. - . 83. |
Shahrir Abdullah, Ahmad Suhaimi Abd Rahim And Suaibunaha Jusoh. (2009). Kamus Kejuruteraan Automotif : Enjin. - . 131. |
Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Saad Aljamali & Azhari Shamsudeen. (2017). Advances In Natural Gas Emerging Technologies. - . 16. |
A.j Helmisyah, S. Abdullah & M.j Ghazali. (2014). Advances In Materials Processing Vol. 3. - . Chapter 10 : 212-249. |
Ja`afar Sahari, Syazrin Aklili, Dzuraidah Abd Wahab, Ruhizan Mohd Yasin, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan, Shahrir Abdullah, Mohd Zaidi Omar, Norhamidi Muhamad. (2012). Mercu Kesarjanaan Pengajaran Dan Pembelajaran, Penyelidikan Tindakan Di Institusi Pengajian Tinggi. - . 175-189. |
Shahrir Abdullah, Mashitoh Yaacob, Nazri Muslim, Fazilah Idris, Nasrudin Yunos, Wan Zulkifli Wan Hassan. (2019). Buku Panduan Amalan Pendidikan Berimpak Tinggi (high-impact Educational Practices-hieps) Dalam Matapelajaran Pengajian Umum. - . 103. |
Prof. Ir. Dr. Shahrir Abdullah. (2012). Garis Panduan Penyediaan Dokumen Program Pengajian Universiti Kebangsaan Malaysia. - . 110. |
Shahrir Abdullah Et Al.. (2011). Jaminan Kualiti Proses Pendidikan: Perspektif Ukm Sebagai Institusi Swaakreditasi Dan Universiti Penyelidikan. - . 83. |
Mohd Zaki Nuawi, Shahrum Abdullah, Shahrir Abdullah, S.m Haris, Azli Arifin. (2009). Matlab: A Comprehensive Reference For Engineers. - . 210. |
Shahrir Abdullah, Ahmad Suhaimi Abd Rahim And Suaibunaha Jusoh. (2009). Kamus Kejuruteraan Automotif : Enjin. - . 131. |
Ahmad Kamal Ariffin & Shahrir Abdullah. (2000). Kaedah Berangka Kejuruteraan. - . 256. |
Ahmad Kamal Ariffin Mohd. Ihsan Dan Shahrir Abdullah. (2000). Kaedah Berangka Kejuruteraan. - . 257. |
Fauza Ghaffar, Wan Ahmad Kamil Mahmood, Johnson Ong Chee Bin, Satria Bijaksana, Shahrir Abdullah, Suzeini Binti Abd Halim, Gerardo Largoza, Wyona Patalinghug, Kamolwan Lueprasert, Sompop Prathanturarug, Ngo Van Thuyen, Ek Somaluk, Nilar Toe, Vongdeuan Osa. (2023). Guide To Aun-qa Assessment At Institutional Level (version 3.0). - Guide To Aun-qa Assessment At Institutional Level (version 3.0). 1-138. |
Shahrir Abdullah, Muhammad Fahmi Miskon, Sharipah Ruzaina Syed Aris, Zoraini Wati Abas , Muhamad Shahbani Abu Bakar, Othman Chin , Syakirah Samsudin , Sun Poi Hun, Ts. Ummu Hani Yusof. (2023). Guidelines To Good Practices: Programme Development And Delivery. - Guidelines To Good Practices: Programme Development And Delivery. 1-87. |
Norhana Binti Arsad;shahrir Bin Abdullah;yushaizad Yusof;noorfazila Binti Kamal;siti Salasiah Binti Mokri;anuar Mikdad Bin Muad;zambri Bin Harun;mohd Hairi Bin Mohd Zaman;aqilah Binti Baseri Huddin;asraf Bin Mohamed Moubark;meor Iqram Bin Meor Ahmad;mohd. (2023). Development Of Face Recognition For An Online Examination. - . . |
Rozli Bin Zulkifli;kamaruzzaman Bin Sopian;shahrir Bin Abdullah;zambri Bin Harun;wan Aizon Bin W Ghopa. (2023). Flow And Convective Heat Transfer Characteristics Of Oblique Fins Minichannel Nanoliquid Cold Plate In Laminar And Turbulence Flow Regime . - . . |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 3c: Penilaian Dokumen (kerja Kumpulan). - . 1-15. |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 1: Bidang 2 & 3 Portfolio Penilaian Kendiri (coppa 2017). - . 1-49. |
Mohd Radzi Bin Abu Mansor;shahrir Bin Abdullah;wan Mohd Faizal Bin Wan Mahmood. (2022). Pencirian Nyalaan Pengoksidaan Deras Jet Hidrogen Dalam Enjin Hidrogen Peredaran Gas Adi. - . . |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 1: Bidang 1 Portfolio Penilaian Kendiri (coppa 2017). - . 1-36. |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 3b: Pelaporan Dan Penarafan Program. - . 1-14. |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 3a: Penilaian Program Dan Persediaan Lawatan. - . 1-30. |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 2: Bidang 6 & 7 Portfolio Penilaian Kendiri (coppa 2017). - . 1-32. |
Shahrir Abdullah, Dalbir Singh. (2022). Qqsp9311 Akreditasi Program Pengajian - Sesi 2: Bidang 4 & 5 Portfolio Penilaian Kendiri (coppa 2017). - . 1-34. |
Zambri Bin Harun;shahrir Bin Abdullah;mohammad Rasidi Bin Mohammad Rasani. (2021). Towards A Developed And Sustainable Kuala Lumpur: Impact Of Urban Planning On Pollutant Dispersion And Heat Dissipation. - . . |
Shahrir Abdullah, Aini Hussain, Mohd Najib Adun & Roslena Md Zaini. (2020). Garis Panduan Bekerja Fkab. - Garis Panduan Bekerja Fkab. 1-5. |
Tan Kay Chuan, Satria Bijaksana, Shahrir Abdullah, Suzeini Binti Abd Halim, Arnel Onesimo O. Uy, Gerardo Largoza, Wyona Patalinghug, Johnson Ong Chee Bin, Chavalit Wongse-ek, Kamolwan Lueprasert, Sompop Prathanturarug, Ngo Van Thuyen, Choltis Dhirathiti. (2020). Guide To Aun-qa Assessment At Programme Level Version 4.0. - Guide To Aun-qa Assessment At Programme Level Version 4.0. 1-111. |
Suhaimi Abdul Talib, Ong Duu Sheng, Rio Sumarni Shariffudin, Shahrir Abdullah, Andy Liew Teik Kooi, Mohamed Nadzri Mohd Yusoff, Lilian Kek Siew Yick, Halinordina Mat Saat, Helmi Sebaweh @ Ahmad, Nabisah K. Kunheen, Zamrin Salim. (2020). Guide On Compliance Evaluation For Self-accreditation Universities. - . 1-50. |
Dzuraidah Binti Abd. Wahab;rahmah Bt. Ismail;juhana Binti Salim;zainab Binti Ismail;shahrir Bin Abdullah;ruhizan Bt. Mohammad Yasin;andanastuti Muchtar;mohd Azlan Shah Bin Zaidi;azizan Bin Ahmad. (2019). Mekanisme Penyepadanan Pengalaman Dan Kredit Pembelajaran Bagi Mod Pembelajaran Dan Pengalaman Terdahulu (prior Experiencetial Learning). - . 1-4. |
Shahrir Bin Abdullah;yusoff Bin Ali;rozli Bin Zulkifli;taib Iskandar Bin Mohamad;azli Bin Arifin;elankovan A/l A Sundararajan;mohammad Khatim Bin Hasan;mariyam Jameelah Binti Ghazali;azhari Bin Shamsudeen. (2019). Computationally Optimised Fuel-efficient Concept Car. - . 1-8. |
Hazman Shah Abdullah, Zita Mohd Fahmi, Soo Sit Chuan, Lilian Kek Siew Yick, Mohamad Dzafir Mustafa, Norasikin Yahya, Syahrizan Shamsuddin, Zabib Bakar, Mohd Rashid Buyong Hamzah, Shamsida Zainal Abidin, Alina Abdul Rahman, Zool Hilmi Mohamed Ashari, Shahr. (2019). Asean Qualifications Reference Framework (aqrf) Referencing Report, Malaysia. - . 1-180. |
Norhamidi Muhamad, Khairul Nizam Abdul Maulud , Ahmad Abas Kutty, Mohd Ekhwan Hj. Toriman, Wan Juliana Wan Ahmad , Shahrir Abdullah, Mohd. Hasni Jaafar, Nor Ghani Md Nor, Wan Zuhairi Wan Yaacob, Jasni Yaakub, Othman Jaafar, Maimon Abdullah & Md Pauzi. (2018). The Proposed Nenggiri Hydroelectric Project, Jajahan Gua Musang, Kelantan Darul Naim. - . . |
Sallehuddin Bin Mohamed Haris;mohd. Jailani Bin Mohd Nor;shahrir Bin Abdullah;azli Bin Arifin;zulkhairi Bin Zainol Abidin;azhari Bin Shamsudeen;mohammad Rasidi Bin Mohammad Rasani. (2018). Active Torque Control Of A Magnetic Gear System. - . . |
Ermy Azziaty Rozali, Shahrir Abdullah. (2018). Garis Panduan Pembangunan Program Akademik Universiti Awam. - . . |
Shahrir Bin Abdullah;wan Mohd Faizal Bin Wan Mahmood;mohd Radzi Bin Abu Mansor. (2018). Kajian Kebolehbakaran Campuran Gas Asli Termampat Dan Hidrogen Di Dalam Bom Pembakaran Dan Enjin Cng-di. - . . |
Andanastuti Muchtar, Ishak Ahmad, Rohimi Shapiee, Wan Zurinah Wan Ngah, Shahrir Abdullah, Nor Hashimah Jalaluddin, Salmi Md. Nooraini, Mohd. Zaidi Omar, Mohd Fuad Jali, Zainul Rashid Mohd Razi, Mohamat Sabri Hassan, Jamia Azdina Jamal And [twelve Others]. (2018). Peraturan-peraturan Universiti Kebangsaan Malaysia (pengajian Siswazah) 2015. - . . |
Norhamidi Muhamad, Ahmad Abas Kutty,khairul Nizam Abdul Maulud, Md. Pauzi Abdullah, Shahrir Abdullah, Maimon Abdullah, Amiruddin Ismail, Mohd. Ekhwan Hj. Toriman, Mohd Hasni Hj Jaafar, Nor. Ghani Md. Nor, Wan Zuhairi Wan Yaacob & Meor Zainal Meor Tali. (2018). Environmental Impact Assessment Second Schedule For The Kuala Lumpur Singapore High Speed Rail Hsr Project. - . . |
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias & Mohd Fadzli Abdollah. (2017). Performance Of Stratified Charged Cngdi Engine With Application Of Lsvd On Turbocharger Compressor. - International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2017). . |
Shahrir Abdullah, Aishah Abu Bakar, Jaafar Jantan, Nazri Muslim, Mashitoh Yaacob, Fazilah Idris, Nasruddin Yunos, Mardian Shah Omar & Puan Aisah Mat Dan. (2017). Garis Panduan Matapelajaran Pengajian Umum (mpu). - . 176. |
H. Amiruddin, W.m.f.w. Mahmood, S. Abdullah, M.r.a Mansor, R. Mamat, A. Alias & M.f.b Abdollah. (2017). Performance And Emission Of Stratified Charge Cngdi Engine With Turbocharger. - 2nd International Conference On Sustainable Mobility. . |
F. Ibrahim, W. M. F. Wan Mahmood, S. Abdullah, M. R. A. Mansor. (2016). Investigation Of Soot Particles In Compression Ignition Diesel Engine By Cfd Simulation Using Particulate Mimic Soot Model. - 2nd International Conference On Automotive Innovation And Green Energy Vehicle 2016 (aigev 2016). . |
Ibrahim Fadzli, Wan Mahmood Wan Mohd Faizal, Abdullah Shahrir, Abu Mansor Mohd Radzi. (2016). Investigation Of Soot Particles In Compression Ignition Diesel Engine By Cfd Simulation Using Different Level Of Complexity Of Soot Models. - Fisita World Automotive Congress 2016. . |
Shahrir Abdullah, Azni Zain Ahmad, Jaafar Jantan, Suria Baba, Mashitoh Yaacob, Ahmad Mazli Muhammad, Mariam Taib, Noor Maizura Mohamad Noor, Amiza Mat Amin, Adzhar Kamaludin, Mohd Rusllim Mohamed, Maszalida Hamzah. (2016). Rubrik Pngk Bersepadu Icgpa Panduan Pentaksiran Hasil Pembelajaran. - . 1-205. |
Ahmad Abas Kutty, Khairul Nizam Maulud, Wan Zuhairi Wan Yaacob, Pauzi Abdullah, Rakmi Abd Rahman, Talib Latif, Shahrir Abdullah, Amiruddin Ismail, Maimon Abdullah, Razak Mohd & Ahmad Adnan Mohamed. (2016). Eia For Proposed Kedah Science & Technology Park, Bukit Kayu Hitam, Kedah Darul Aman. - Eia Report. . |
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Fadzli Ibrahim, Shahrir Abdullah, Kamaruzzaman Sopian. (2015). Preliminary Study Of Hydrogen Fuel Combustion In Compression Ignition Engine Under Argon-oxygen Atmosphere. - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). . |
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali. (2015). Combustion Pressure Characteristics Of Homogeneous Combustion Compressed Natural-gas Direct Injection. - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). . |
Mohd Radzi Abu Mansor, Mohd Shereen Zainuddin, Norhidayah Mat Taib, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Zul Ilham. (2015). Performance And Emission Of Biodiesel Fuel Direct Injection Compression Ignition Engine. - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). . |
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor. (2015). Investigation Of Soot Emission In Compression Ignition Diesel Engine By Cfd Simulation. - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar2015). . |
Zambri Harun, W. A. W. Ghopa, S. Abdullah, M. Izhar Ghazali, Ashraf A. Abbas, M. R Rasani, Rozli Zulkifli, W. M F. Wan Mahmood, M R Abu Mansor, Z. Z. Abidin And Wan Hanna Melini Wan Mohtar. (2015). The Development Of A Multi-purpose Wind Tunnel. - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). . |
Layth H. Jawad, Shahrir Abdullah, Rozli Zulkifli And Wan Mohd F. Wan Mahmood. (2012). Numerical Simulation Of Flow Inside A Vaned Diffuser Of A Modified Centrifugal Compressor. - 18th Australasian Fluid Mechanics Conference (afmc). . |
B. Daryakenari, S. Abdullah, R. Zulkifli, E. Sundararajan. (2011). Numerical Study Of Multiple Channel Road Vehicle Underbody Diffusers. - Regional Conference On Automotive Research 2011. . |
A.j. Helmisyah, S. Abdullah, M.j. Ghazali. (2011). Structure Integrity Analysis Of Piston Crown Against Thermal Stress For Compressed Natural Gas Direct Injection Engine. - Regional Tribology Conference 2011. . |
Lukeman Yusoff, Lim Fang Yau, Shahrir Abdullah, Rozli Zulkifli, Azhari Shamsudeen, Mohammad Katim Hassan. (2011). Underhood Fluid Flow And Thermal Analysis For Passenger Vehicle. - Regional Conference On Automotive Research (recar) 2011. . |
M.h. Yazdi, S. Abdullah, I. Hashim And K. Sopian. (2010). Slip Mhd Flow Over Permeable Stretching Surface With Chemical Reaction. - 17th Australasian Fluid Mechanics Conference. . |
M.a. Mussa, S. Abdullah, C.s. Nor Azwadi And N. Muhamad. (2010). Simulation Of Rarefied Gas Flow In Slip And Transitional Regimes. - European Fluid Mechanic Conference 8. . |
Azizah Jaafar, Shahrir Abdullah, Juhana Salim Dan Chan Siew Lee.. (2010). Kajian Kebolehpercayaan Maklum Balas Pelajar Terhadap Sistem Penilaian Pengajaran Kursus (sppk) Dan Kepenggunaan Sistem. - Kongres Pengajaran Dan Pembelajaran 2010. Memupuk Inovasi Dalam Pengajaran Dan Pembelajaran.. . |
Helmisyah Ahmad Jalaludin, Mariyam Jameelah Ghazali, And Shahrir Abdullah. (2010). Thermal Analysis Of Piston Crown For Compressed Natural Gas Direct Injection Engine And The Use Of Thermal Barrier Coating Against Extreme Temperature. - International Conference On Science & Technology: Applications In Industry & Education (2010), Penang. . |
T.i. Mohamad, H.g. How, S. Abdullah And Y. Ali. (2010). Combustion Characteristic Of Compressed Natural Gas In A Spark Ignition Engine Using Spark Plug Fuel Injector Under Various Operating Conditions. - International Conference On Sustainable Mobility (icsm 2010), Kuala Lumpur. . |
H. G. How, T. I. Mohamad, W. A. W. Ghopa, Y. Ali, S. Abdullah, A. A. A. Fauzi And S. Marhamah. (2010). Investigation Of The Effect Of Engine Performance And Emissions Of Ron 95 And Ron 97 In Spark Ignition Engine. - International Conference On Sustainable Mobility (icsm 2010), Kuala Lumpur. . |
B. Daryakenari, S. Abdullah, F.y. Lim, R. Zulkifli & E. Sundararajan. (2010). Effect Of Angular Rear Bumper On The Reduction Of Drag Coefficient On Ahmed Body. - International Conference On Sustainable Mobility (icsm 2010), Kuala Lumpur. . |
Shahrir Abdullah, Azian Abd Latiff, Thomas Paraidathathu, Azizah Jaafar, Wan Noorina Wan Ahmad, Safinaz Mohd Hussein, Wan Rosmanira Ismail Dan Sity Daud. (2010). Gap Analysis Towards Harmonisation Of The Code Of Practice For Programme Accreditation Of Mqa With The Quality Management System Of Ms Iso 9001:2008 For Management Of Undergraduate And Postgraduate St. - Kongres Pengajaran Dan Pembelajaran Ukm 2010.. . |
Che Husna Azhari, Shahrir Abdullah, Riza Atiq O.k. Rahmat, Aini Hussain, Paraidathathu T. Thomas, Mohd. Zaidi Omar, Nabishah Mohamad, Che Hassan Che Haron, Dzuraidah Abd Wahab, Wan Zurinah Wan Ngah. (2009). Self Review Portfolio For The Mqa Institutional Audit. - Area 7: Programme Monitoring And Review. . |
Che Husna Azhari, Shahrir Abdullah, Riza Atiq Ok Rahmat, Aini Hussain, Paraidathathu T. Thomas, Mohd Zaidi Omar, Nabishah Mohamad, Che Hassan Che Haron, Dzuraidah Abd Wahab, Wan Zurinah Wan Ngah. (2009). Part B: Area 2 Curriculum Design & Delivery. - Self Review Portfolio For The Mqa Institutional Audit. . |
Che Husna Azhari, Shahrir Abdullah, Riza Atiq Ok Rahmat, Aini Hussain, Paraidathathu T. Thomas, Mohd Zaidi Omar, Nabishah Mohamad, Che Hassan Che Haron, Dzuraidah Abd Wahab, Wan Zurinah Wan Ngah. (2009). Self Review Portfolio For The Mqa Institutional Audit. - . . |
Amiruddin Ismail, Sahibin Abd Rahim, Rakmi Abd Rahman, Marzuki Mustafa, Shahrir Abdullah, Mohd Ehwan Toriman, Mastor Surat, Maimon Abdullah Mazlan Abd Ghaffar & Razak Mohd. (2008). Eia Study For Projek Pembangunan Universiti Darul Iman (udm), Kampus Besut Terengganu On Lot No. Pt5869. - Laporan Kerja Perundingan. . |
Shahrir Abdullah. (2008). Enhancing Hpc-cae Capabilities For Malaysian Automotive Research Through Automotive Grid. - Grid Computing Conference (gcc) In Conjuction With World Congress On Information Technology 2008 (wcit`08). . |
Shahrir Abdullah, Norhamidi Muhamad, Riza Atiq Abdullah O.k. Rahmat, Baba Md Deros, Noorhisham Tan Kofli , Mardina Abdullah. (2007). Penilaian Objektif Dan Hasil Program Pendidikan Berasaskan Hasil (obe): Soal Selidik Majikan Industri Dan Alumni. - Seminar Pendidikan Kejuruteraan Dan Alam Bina (peka 2007). . |
Tulus, Ariffin, A. K., Abdullah, S. & Muhamad. (2006). Finite Element Analysis For Heat Transfer In The Insulator On Piston Pin Of A Linear Generator Engine. - The 2nd Imt-gt Regional Conference On Mathematics, Statistics And Their Application (ircmsa 2006). . |
Kamaruzzaman S, Mohd Yusof O, Baharudin Y, Wan Ramli W.d, Yusoff A, Zainol Abidin A.r, Shahrir A, Zahari I, Mohd Hafidz R, Mohd Fauzi M.z, Zuhairuse M.d, Mastor S, Mazlan M.t,..., Wan Mohd Faizal W.m,. (2004). Sustainable And Environment Friendly Solar Energy Technologies Research And Development In Universiti Kebangsaan Malaysia. - National Conference On Engineering And Technology (nacet 2004). . |
Effects of converging and diverging riblets on turbulent boundary layers , Penyelidik Bersama , 01-11-2024 sehingga 31-10-2026 , Universiti |
Elucidating the combustion of hydrogen-air in Direct Injection Spark Ignition Engine Efficiency , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
Soft palate snoring under varying severity of upper airway obstruction for non-invasive biomarkers of sleep apnea , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
Drag Reduction using Surface Feature , Penyelidik Bersama , 20-06-2024 sehingga 30-05-2025 , Antarabangsa |
Heat Transfer Enhancement of Hybrid Two-phase Nanofluid Jet Impingement for High Heat Flux Cooling , Penyelidik Bersama , 15-03-2024 sehingga 14-03-2025 , Universiti |
Elucidation of the Characteristics of Heat Transfer of Pulsating Hybrid Nanofluids Jet for High Heat Flux Cooling in Confined Space , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2026 , Kebangsaan |
Ciri-ciri Pembakaran Hidrogen Suntikan Langsung dalam Enjin Pencucuhan Bunga Api pada Beban Tinggi , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2025 , Universiti |
Thermal Enhancement of Nanofluids in Turbulent Regime for Optimum Performance of a Heat Exchanger System , Ketua Projek , 01-09-2019 sehingga 31-05-2024 , Kebangsaan |
Pembinaan Sistem Pentaksiran Holistik Hasil Pembelajaran Program , Ketua Projek , 01-01-2016 sehingga 31-12-2017 , Universiti |
Alternative Paradigm and Innovation in Engineering Education: A Model for ISLAMIC Engineering Education in the Muslim Countries , Ketua Projek , 01-08-2014 sehingga 31-12-2017 , Universiti |
Sistem Kenderaan lestari Berkecekapan Tenaga Optimum , Ketua Projek , 01-04-2014 sehingga 31-03-2015 , Universiti |
Kajian Kebolehbakaran Campuran Gas Asli Termampat dan Hidrogen di dalam Bom Pembakaran dan Enjin CNG-DI , Ketua Projek , 01-11-2013 sehingga 31-10-2015 , Universiti |
SISTEM KENDERAAN BERKECEKAPAN BAHAN API OPTIMUM , Ketua Projek , 01-01-2013 sehingga 31-03-2014 , Universiti |
Pembangunan Kod Amalan Proses Dalaman Universiti Untuk Pencapaian Indeks Prestasi Utama Universiti Penyelidikan , Ketua Projek , 01-06-2011 sehingga 30-06-2014 , Universiti |
COMPUTATIONALLY OPTIMISED FUEL-EFFICIENT CONCEPT CAR , Ketua Projek , 01-11-2009 sehingga 31-12-2014 , Kebangsaan |
Pembangunan Aplikasi - Sistem Pengurusan Data (SME) , Ketua Projek , 15-07-2009 sehingga 31-10-2014 , Universiti |
PEMBANGUNAN PELAN JAMINAN KUALITI UKM , Ketua Projek , 15-07-2009 sehingga 31-12-2012 , Universiti |
KAJIAN KEBOLEHPERCAYAAN INPUT PELAJAR UNTUK MAKLUM BALAS SISTEM PENILAIAN PENGAJARAN KURSUS (SPPK) , Ketua Projek , 15-07-2009 sehingga 14-01-2012 , Universiti |
Design of CNG-DI Piston for Extreme Temperature and Pressure , Ketua Projek , 01-10-2007 sehingga 30-06-2012 , Universiti |
Development of microexchanger for liquid-based termal management in high-performance semiconductor package , Ketua Projek , 01-08-2007 sehingga 30-11-2009 , Kebangsaan |
Development of Face Recognition for an Online Examination , Penyelidik Bersama , 01-05-2021 sehingga 30-10-2022 , Universiti |
Mathematical Formulation for Analysing Hybrid Nanofluid Heat Transfer Performance in Jet Impingement , Penyelidik Bersama , 01-01-2019 sehingga 31-12-2022 , Kebangsaan |
Flow and Convective Heat Transfer Characteristics of Oblique Fins MiniChannel Nanoliquid Cold Plate in Laminar and Turbulence Flow Regime , Penyelidik Bersama , 01-01-2019 sehingga 30-09-2022 , Kebangsaan |
Towards a developed and sustainable Kuala Lumpur: impact of urban planning on pollutant dispersion and heat dissipation , Penyelidik Bersama , 15-11-2018 sehingga 14-05-2021 , Kebangsaan |
Pencirian Nyalaan Pengoksidaan Deras Jet Hidrogen dalam Enjin Hidrogen Peredaran Gas Adi , Penyelidik Bersama , 15-08-2017 sehingga 14-02-2021 , Kebangsaan |
Sistem Kenderaan Lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
Active torque control of a magnetic gear system , Penyelidik Bersama , 01-02-2015 sehingga 31-07-2017 , Universiti |
Probabilistic and Non-Probabilistic Formulation of Fatigue Behaviour in Multiscale Structure , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
A Study on the Ignition and Combustion Characteristics of Biodiesel Oil in A Constant Volume Vessel , Penyelidik Bersama , 16-12-2013 sehingga 31-05-2017 , Kebangsaan |
DEVELOPMENT OF EFFICIENT FLUID-STRUCTURE INTERACTION MODELLING USING OVERLAPPING GRID FORMULATION , Penyelidik Bersama , 16-12-2013 sehingga 30-05-2017 , Kebangsaan |
STRATIFIED CHARGE COMPRESSED NATURAL GAS DIRECT INJECTION WITH TURBOCHARGER FOR FUEL EFFICIENT ENGINE , Penyelidik Bersama , 01-08-2013 sehingga 30-04-2016 , Kebangsaan |
Tuning of Programme Outcomes Based on Stakeholders` input , Penyelidik Bersama , 01-07-2013 sehingga 31-12-2014 , Universiti |
Mekanisme Penyepadanan Pengalaman dan Kredit Pembelajaran bagi Mod Pembelajaran dan Pengalaman Terdahulu (Prior Experiencetial Learning) , Penyelidik Bersama , 01-07-2013 sehingga 30-06-2014 , Universiti |
Heat Transfer in Hybrid Single-Phase Jet Impingement Micro-Channel for High Heat Flux Cooling , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2016 , Kebangsaan |
PROBALISTIC AND NON-PROBALISTIC FORMULATION OF FATIGUE BEHAVIOUR IN MULTISCALE STRUCTURE , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
High Efficiency Thermoelectric Generator Output through Heat Transfer Enhancement , Penyelidik Bersama , 01-06-2012 sehingga 31-05-2014 , Kebangsaan |
Meningkatkan KPI Kualiti Siswazah - GOT , Penyelidik Bersama , 01-11-2011 sehingga 30-09-2013 , Universiti |
Numerical and Experimental Investigations on the Flow and Convective heat Transfer Characteristics of Biometallic nanofluids in Fully developed laminar Flow Regime , Penyelidik Bersama , 06-06-2011 sehingga 17-01-2014 , Kebangsaan |
Fundamental Studies on Multiple Steady and Pulse Jet Impingement Heat Transfer , Penyelidik Bersama , 06-06-2011 sehingga 05-06-2013 , Kebangsaan |
PENGGUBALAN DAN PELAKSANAAN PROGRAM 'ENHANCING COMMUNICATIONS STYLE (ECOMS)' DI KALANGAN AKADEMIK PROF C KE AT , Penyelidik Bersama , 01-06-2011 sehingga 30-06-2013 , Universiti |
Analisis Jurang dalam Penyepaduan SPK ISO 2001:9008 dengan COPIA , Penyelidik Bersama , 01-04-2011 sehingga 30-09-2013 , Universiti |
Rangka Kerja bagi peningkatan Pencapaian Hasil pembelajaran program terfokus pelajar , Penyelidik Bersama , 01-04-2011 sehingga 31-03-2012 , Universiti |
Readiness and Resiliency of Malaysian Society for Climate Change , Penyelidik Bersama , 01-07-2009 sehingga 31-12-2011 , Universiti |
DEVELOPMENT OF A COST-COMPETITIVE INTERNALLY MIXING NATURAL GAS CONVERSION SYSTEM FOR MALAYSIAN MANUFACTURED AUTOMATIVE ENGINE , Penyelidik Bersama , 01-12-2008 sehingga 30-11-2010 , Kebangsaan |
STUDIES ON HYDROGEN-METHANE BLEND AS FUEL FOR EXTRA LOW-EMISSION SPARK IGNITION ENGINES , Penyelidik Bersama , 01-12-2008 sehingga 01-11-2010 , Kebangsaan |
Stochastic Nano Fatigue-Fracture Reliability and Control of Automobile Active Suspension System , Penyelidik Bersama , 01-06-2008 sehingga 30-11-2011 , Universiti |
Optimisation of Vibro-Acoustics and Fuel Efficiency Performance of An Automotive System , Penyelidik Bersama , 01-06-2008 sehingga 31-05-2011 , Universiti |
DEVELOPMENT OR THERMAL INTERFACE MATERIAL'S SURFACE THERMAL PROPETIES INDEX FOR FLIP CHIP BALL GRID ARRAY , Penyelidik Bersama , 01-12-2007 sehingga 01-12-2009 , Kebangsaan |
Heat Transfer and Fluid Flow Characteristics of Self-Rotating Cylinder For High-Frequency Pulsed Jet Impingement , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2011 , Universiti |
Design of Intergrated Injector-Spark Plug for CNGDI Engine , Penyelidik Bersama , 01-10-2007 sehingga 31-12-2010 , Universiti |
Development of a Pressure Differential Adaptive Valve Lift and Timing for a CNGDI Engine , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2010 , Universiti |
BioMEMS For Drug Delivery Applications , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2010 , Universiti |
Development of a high efficiency marine current energy converter , Penyelidik Bersama , 01-08-2007 sehingga 30-09-2009 , Kebangsaan |
Development of low temperature solid oxide fuel cell electrolytes and electrodes , Penyelidik Bersama , 01-08-2007 sehingga 01-08-2009 , Kebangsaan |
Development Of Advanced Pulse Jet Heating System For Aerospace Applications , Penyelidik Bersama , 01-12-2006 sehingga 30-06-2009 , Kebangsaan |
Anugerah Khas Kualiti / Kreatif & Rekacipta-saguhati , 2003 |
Anugerah Pengajar Cemerlang / Pengajar Cemerlang-saguhati , 2003 |
Anugerah Perkhidmatan Cemerlang , 2004 |
Anugerah Penyelidikan , 2009 |
Anugerah Khas Kualiti / Anugerah Citra UKM - Jawatankuasa Dokumentasi , 2011 |
Anugerah Khas Kualiti / ANUGERAH CITRA UKM - JAWATANKUASA , 2012 |
Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2013 |
Anugerah Perkhidmatan 20 Tahun / Anugerah Perkhidmatan 20 Tahun , 2015 |
Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2022 |
Simulation of Surface Tension Effects In Thin Section Castings Using, FOO KAI JAAN, Sarjana |
Pembangunan Kriostat Untuk Penyerakan Neuron Bersudut Kecil (SANS), AZRAF BIN AZMAN, Sarjana |
LIM FANG YAU, Sarjana |
Analisa Kebocoran Ring Piston Pada Mesin CNGDI, TEDDY NUGROHO NOTOSUSANTO, Sarjana |
ZENG HUIJUN, Sarjana |
Kajian pemakaian minyak pelinciran terhadap struktur mikro gelang omboh automotif enjine., MECHI HARDO, Sarjana |
Pengurusan Haba Bateri Bagi Kenderaan Elektrik Menggunakan Plat Cecair Sejuk Dengan SiriP Serong Berlainan Susun Atur, MOHD RASHDAN BIN AWANG, Sarjana |
Structure Integrity Thermal Analyses of Coated Piston Crown For Compressed Natural Gas Direct Injection Engine., HELMISYAH BIN AHMAD JALALUDIN, Sarjana |
Penyelakuan Proses Pengisian Acuan Dalam Proses Pengacuan Suntikan Logam, ZALIHA BINTI WAHID, Sarjana |
MOHAMED SAIFUL FIRDAUS BIN HUSSIN, Sarjana |
Pengstabilan Voltan Bagi Sistem Kogenerasi Kuasa Termoelekrik Menggunakan Pengubah Penggalak, SIM SONG TUN, JASON, Sarjana |
LI QIAO, Doktor Falsafah |
MOHAMMAD HAFIZI BIN JAMALUDDIN, Doktor Falsafah |
LIU PENG, Doktor Falsafah |
WAFAA A J M Y ALGHANIM, Doktor Falsafah |
Kajian pemindahan haba secara kaedah hibrid denyutan cecair nano untuk penyejukan fluks haba tinggi dalam ruang terkurung, BADRULLZAMIN BIN MOHD YASSIN, Doktor Falsafah |
Design of Automotive Natural Gas Engine - Direct injection, BELAL F. YOUSIF, Doktor Falsafah |
Pencirian dan Penggunaan Campuran Minyak Masak Terpakai Tak Terawat Dengan Diesel, MD ISA BIN ALI, Doktor Falsafah |
Pulse Jet Impingement For Heat Transfer Enhancement., ROZLI BIN ZULKIFLI, Doktor Falsafah |
The Lattice Boltzmann Method For Fluid Flow and Thermal Simulation., MUNTHER A. MUSSA, Doktor Falsafah |
TALHA FIROZ, Doktor Falsafah |
Exergy Analysis of Open Microchannels embedded Within Permeable Surface: application to Magnetohydrodynamics (MHD)., MOHAMMAD HOSSEIN YAZDI, Doktor Falsafah |
Thermal Management for the Compressed Natural Gas Direct Injection Engine., MOHAMMAD A MOHAMMAD AL-RAWI, Doktor Falsafah |
Penilaian Taburan Hayat Lesu Komponen Automotif Dengan Bebanan Ekstrem Melalui Pendekatan Ciri Hayat Taburan Dan Fungsi Keboleharapan, MOHD. ASRI BIN YUSUFF, Doktor Falsafah |
Development of A Close Loop Photovoltaic Solar Assisted Heat Pump Drying, FATAH OMRAN SALEM AL GHUOL, Doktor Falsafah |
GERALD VICTOR A/L RICHARD JOSEPH, Doktor Falsafah |
Numerical Analysis and Enhancement of Vehicle Aerodynamics with Spoilers and Diffusers, BEHRANG DARYAKENARI, Doktor Falsafah |
ANALISIS PRESTASI HABA BENDALIR NANO DI DALAM TIUB DILENGKAPI PITA TERPIUH DIUBAH SUAI, SA`ADAH BINTI AHMAD SOWI, Doktor Falsafah |
Transfer Enhancement Using Nanofluids in Laminar Pipe Flow, HYDER HASSAN ABD, Doktor Falsafah |
Flow Characteristics and Heat Transfer Enhancement at Interference Zone of Twin Pulsating Circular Jets, ALI AHMED GITAN, Doktor Falsafah |
Analisis Aliran Bendalir dan haba di Dalam Ruang Enjin Kenderaan., LUKEMAN BIN YUSOFF, Doktor Falsafah |
ANALISIS PRESTASI ENJIN CNG-DI MENGGUREKEN CAMPURAN HOMOGEN DAN, SAAD MOHSEN SAAD AL-JAMALI, Doktor Falsafah |
A Modified Turbocharger Centrifugal Compressor for Improved Performance Map, LAYTH HASAN JAWAD, Doktor Falsafah |
Development Fuel Injector For Hydrogen-Natural Gas Fuel In Direct Injection Engine., JAVAD ZAREEI, Doktor Falsafah |
SISTEM KUASA TERMOELEKTRIK DAN TERMOFOTOVOLTAN MENGGUNAKAN, KHAIRIL FAIZI BIN MUSTAFA, Doktor Falsafah |
SISTEM JET SANTAKAN DEDENYUT BERKEMBAR UNTUK PENINGKATAN, AHMAD FADHIL BIN ISMAIL, Doktor Falsafah |
PENINGKATAN PEMINDAHAN HABA DALAM ALIRAN SANTAKAN JET, MAHIR FARIS ABDULLAH, Doktor Falsafah |
Pengoptimuman Penggasan Campuran Biojisim Pelepah Kelapa Sawit Untuk Penghasilan Bahan Api Keterbaharuan, MUHAMMAD FAIZ BIN ABDUL HAMID, Doktor Falsafah |
KAJIAN EVOLUSI DAN TABURAN SAIZ PARTIKEL JELAGA DI DALAM SILINDER, FADZLI BIN IBRAHIM, Doktor Falsafah |
APLIKASI PERESAP BERBILAH PEMAMPAT PENGECAS TURBO PADA ENJIN CNGDI UNTUK TEKNOLOGI KENDERAAN HIJAU, HILMI BIN AMIRUDDIN, Doktor Falsafah |
PENGURANGAN SUDUT PUSAR ALIRAN PENGAMBILAN PAM EMPAR BERALIRAN PAKSI DI DALAM TAKUNGAN MENGGUNAKAN PLAT PEMISAH ALIRAN LANTAI, TAJUL ARIFFIN BIN NORIZAN, Doktor Falsafah |
SAYYID ZAINAL ABIDIN BIN SYED AHMAD, Doktor Falsafah |
Majlis Pengurusan Kualiti IPTA , 01-01-2014 sehingga 31-12-2015 , Kebangsaan |
Bengkel Penggunaan "Balanced Scorecard (BSC) bagi Pengukuran Key Performance Inficators (KPI) - Pengenalan , 27-02-2014 sehingga 27-02-2014 , Kebangsaan |
Kajian Penilaian Kesan Kepada Alam Sekeliling (EIA) Terperinci bagi Projek Mass Rapid Transit Laluan 2: Sg. Buloh - Serdang - Putrajaya Oleh Mass Rapid Transit Corporation Sdn Bhd , 10-12-2014 sehingga 10-04-2015 , Kebangsaan |
Panel Penilai MQA , 01-06-2014 sehingga 30-06-2017 , Kebangsaan |
Temuduga Program Hadiah Latihan Persekutuan dan Cuti Belajar Bergaji Penuh Tanpa Biasiswa sesi 2015 , 05-11-2014 sehingga 05-11-2014 , Kebangsaan |
Universiti Sains Malaysia , 04-06-2014 sehingga 03-06-2016 , Kebangsaan |
Universiti Teknologi Malaysia (UTM) , 14-05-2014 sehingga 14-05-2014 , Kebangsaan |
'Mock Audit' Kesediaan Autonomi UMP berdasarkan instrumen Code of University Good Governance (CUGG) dan University Good Governance Index (UGGI) , 25-06-2014 sehingga 25-06-2014 , Kebangsaan |
Jawatankuasa Semakan Semula Buku Garis Panduan Penulisan Program Akademik IPTA , 12-07-2013 sehingga 11-07-2015 , Kebangsaan |
Panel Pakar Bidang Teknologi Kejuruteraan dan Inovasi , 01-03-2013 sehingga 28-02-2015 , Kebangsaan |
Guideline to Good Practices: Monitoring, Reviewing and Continually Improving Institutional Quality , 06-09-2013 sehingga 05-09-2015 , Kebangsaan |
Taylor's University , 01-02-2014 sehingga 29-02-2016 , Kebangsaan |
Universiti Teknologi MARA (UiTM) , 07-04-2014 sehingga 09-04-2014 , Kebangsaan |
Universiti Kuala Lumpur (UniKL) , 01-09-2013 sehingga 31-08-2015 , Kebangsaan |
Panel Penilaian dan Pemantauan Projek di bawah Pembiayaan Dana R,D&G MOSTI , 01-03-2012 sehingga 31-12-2015 , Kebangsaan |
Lembaga Pengajian Program Bachelor of Engineering Technology (Hons) in Mechanical and Sustainable Systems , 03-01-2013 sehingga 02-01-2015 , Kebangsaan |
The 27th AUN Actual Quality Assessment at Institut Pertanian Bogor (IPB) , 11-03-2014 sehingga 13-03-2014 , Antarabangsa |
The 28th AUN Actual Quality Assessment at Universitas Gadjah Mada, Yogyakarta, Indonesia , 08-09-2014 sehingga 10-09-2014 , Antarabangsa |
Lawatan Akreditasi Penuh Program MQA - Heriot Watt University Malaysia (HWUM) , 24-11-2014 sehingga 25-11-2014 , Kebangsaan |
The 36th AUN-QA Quality Assessment University of the Philippines Los Baños, Los Baños, Philippines , 15-12-2014 sehingga 17-12-2014 , Antarabangsa |
The 38th AUN Quality Assessment at Universitas Diponegoro, Semarang, Indonesia , 19-01-2015 sehingga 21-01-2015 , Antarabangsa |
Lawatan Akreditasi EAC: Swinburne University Of Technology Sarawak Campus , 01-10-2014 sehingga 02-10-2014 , Kebangsaan |
Lawatan Akreditasi EAC: INTI International University, Nilai, Negeri Sembilan , 15-10-2014 sehingga 16-10-2014 , Kebangsaan |
Malaysian Higher Education Institutions Quality Assurance Network , 30-09-2014 sehingga 29-09-2016 , Kebangsaan |
Malaysian Higher Education Institutions Quality Assurance Network , 22-09-2016 sehingga 21-09-2018 , Kebangsaan |
Universiti Malaysia Pahang , 14-09-2015 sehingga 15-09-2015 , Kebangsaan |
Universiti Teknologi Mara (UiTM) , 18-06-2015 sehingga 17-06-2017 , Kebangsaan |
ADJUNCT PROFESSOR FOR SWINBURNE UNIVERSITY OF TECHNOLOGY , 15-08-2017 sehingga 14-08-2020 , Antarabangsa |
AUN-QA Council , 01-03-2016 sehingga 28-02-2018 , Antarabangsa |
Panel Penasihat Kajian dan Pembangunan SETARA , 24-04-2017 sehingga 31-12-2017 , Kebangsaan |
Jawatankuasa Perancangan Strategik Bagi lnisiatif A2 Pentaksiran Bersepadu (iCGPA) Di Bawah Lonjakan 1 PPPM(PT) 2015-2025 , 07-03-2017 sehingga 31-12-2018 , Kebangsaan |
Jawatankuasa Mesyuarat/Bengkel Semakan Semula Dokumen dan Instrumen Penilaian Swaakreditasi , 17-11-2017 sehingga 16-11-2018 , Kebangsaan |
Jawatankuasa Teknikal iCGPA , 01-01-2017 sehingga 31-12-2019 , Kebangsaan |
Expert for Referencing Malaysian Qualifications Framework to the ASEAN Qualifications Reference Framework , 01-07-2017 sehingga 31-07-2018 , Kebangsaan |
Sistem Penarafan Universiti dan Kolej Universiti (SETARA 2017) , 16-08-2017 sehingga 31-12-2017 , Kebangsaan |
INTI International University , 12-04-2017 sehingga 12-04-2017 , Kebangsaan |
Swinburne University of Technology Sarawak Campus , 05-09-2017 sehingga 05-09-2017 , Kebangsaan |
Universiti Teknikal Malaysia Melaka (UTeM) , 22-05-2017 sehingga 23-05-2017 , Kebangsaan |
Panel Penilai Agensi Kelayakan Malaysia (MQA) , 01-06-2017 sehingga 30-06-2020 , Kebangsaan |
Heriot-Watt University Malaysia , 01-06-2016 sehingga 30-06-2018 , Kebangsaan |
Universiti Sains Malaysia (USM) , 01-09-2016 sehingga 31-08-2017 , Kebangsaan |
Panel Penilaian dan Pemantauan Projek di bawah Pembiayaan Dana R, D & C MOSTI , 27-05-2016 sehingga 26-05-2018 , Kebangsaan |
Audit Swaakreditasi Universiti Tenaga Nasional (UNITEN) , 20-03-2015 sehingga 31-12-2015 , Kebangsaan |
Audit Swaakreditasi Universiti Tenaga Nasional (UTAR) , 06-03-2015 sehingga 31-12-2015 , Kebangsaan |
Audit Swaakreditasi Universiti Tenaga Nasional (UTP) , 25-05-2015 sehingga 31-12-2015 , Kebangsaan |
Audit Swaakreditasi Universiti Tenaga Nasional (UUM) , 23-10-2015 sehingga 30-06-2016 , Kebangsaan |
SINOPEC Noise Study/Modelling Study , 01-07-2017 sehingga 31-07-2018 , Kebangsaan |
Jawatankuasa Induk Persidangan Antarabangsa AUN-QA 2017 , 31-01-2017 sehingga 30-04-2017 , Antarabangsa |
Jawatankuasa Kerja Persidangan Antarabangsa iCGPA 2017 , 02-01-2017 sehingga 25-01-2019 , Kebangsaan |
Majlis Dekan Kejuruteraan (MCED) , 01-07-2018 sehingga 30-04-2021 , Kebangsaan |
AQAN Seminar 2018 , 27-09-2018 sehingga 27-09-2018 , Antarabangsa |
AUN-QA Council , 01-03-2018 sehingga 28-02-2020 , Antarabangsa |
Majlis Akreditasi Kejuruteraan (EAC) , 02-05-2018 sehingga 01-05-2023 , Kebangsaan |
Multimedia University (MMU) , 01-09-2018 sehingga 31-08-2021 , Kebangsaan |
Agensi Kelayakan Malaysia (MQA) , 30-03-2018 sehingga 28-02-2021 , Kebangsaan |
Jawatankuasa Pemantapan Kursus Kelompok U1 Mata Pelajaran Pengajian Umum (MPU) , 05-09-2018 sehingga 31-12-2019 , Kebangsaan |
Panel Penilai bagi Audit Pengekalan Swaakredit asi Universit i Teknologi Malaysia , 22-10-2018 sehingga 31-12-2018 , Kebangsaan |
Universiti Kuala Lumpur Kampus Cawangan Malaysia France Institute , 05-11-2018 sehingga 04-10-2023 , Kebangsaan |
Universiti Kuala Lumpur Kampus Cawangan Malaysia Spanish Institute , 05-11-2018 sehingga 04-10-2023 , Kebangsaan |
Panel Penilai bagi Audit Pematuhan Syarat-Syarat Akreditasi Penuh Program Pascaijazah Universiti Pertahanan Nasional Malaysia (UPNM) , 31-01-2019 sehingga 31-12-2019 , Kebangsaan |
Third APQN Global Summit 2018 , 27-08-2018 sehingga 29-08-2018 , Antarabangsa |
Taylor's 10th Teaching and Learning Conference (TTLC2017) , 30-09-2017 sehingga 01-10-2017 , Kebangsaan |
5th Education Nation Conference anjuran Asian World Summit , 25-04-2018 sehingga 25-04-2018 , Kebangsaan |
SHARE Workshop on on the Impact of Regional Quality Assurance Standards on Higher Education in Cambodia , 19-10-2018 sehingga 20-10-2018 , Antarabangsa |
European Union Support to Higher Education in the ASEAN Region (SHARE) programme , 08-11-2017 sehingga 31-03-2018 , Antarabangsa |
Jawatankuasa Perancangan Strategik Pengukuhan Kursus Umum IPT di bawah lnisiatif Lonjakan 1 PPPM(PT) 2015-2025 , 13-01-2017 sehingga 12-01-2019 , Kebangsaan |
7th AUN-QA Institutional Assessment at International University, Vietnam National University - Ho Chi Minh City, Vietnam , 13-09-2018 sehingga 31-12-2018 , Antarabangsa |
Jawatankuasa Penasihat Rayuan Akreditasi Pendidikan Tinggi , 22-12-2018 sehingga 21-12-2021 , Kebangsaan |
Majlis Dekan Alam Bina (MDAB) , 12-02-2019 sehingga 30-04-2021 , Kebangsaan |
Jawatankuasa Teknikal Pengukuhan Kursus Mata pelajaran Pengajian Umum (MPU) lnstitusi Pendidikan Tinggi (IPT) , 10-04-2019 sehingga 09-04-2021 , Kebangsaan |
Jawatankuasa Perancangan Strategik Pengukuhan Kursus Mata pelajaran Pengajian Umum (MPU) lnstitusi Pendidikan Tinggi (IPT ). , 05-04-2019 sehingga 04-04-2021 , Kebangsaan |
Jawatankuasa Pembangunan Kandungan Kursus Falsafah dan Isu Semasa serta Kursus Penghayatan Etika dan Peradaban , 28-08-2019 sehingga 27-08-2021 , Kebangsaan |
Heriot-Watt University Malaysia , 01-10-2018 sehingga 30-09-2020 , Kebangsaan |
Panel Pakar Projek Dana Penyelidikan, Pembangunan dan Pengkomersialan (R,D&C) , 01-09-2019 sehingga 31-08-2021 , Kebangsaan |
Ahli Panel Penilai MQA (bidang Kejuruteraan Mekanikal dan Fluid Dynamics) , 01-06-2020 sehingga 31-05-2023 , Kebangsaan |
Jawatankuasa Penasihat Rayuan Akreditasi Pendidikan Tinggi , 22-06-2020 sehingga 21-06-2022 , Kebangsaan |
Majlis Dekan Kejuruteraan (MCED) , 01-01-2020 sehingga 31-12-2021 , Kebangsaan |
Pakar Rujuk MQA: Malaysian Qualifications Framework (MQF) dan Outcome-Based Education (OBE) , 01-01-2020 sehingga 31-12-2021 , Kebangsaan |
Panel Penilai secara Desktop Review bagi Penilaian Akreditasi UOW Malaysia KDU , 05-08-2020 sehingga 04-11-2020 , Kebangsaan |
Jawatankuasa Kerja bagi Mengkaji 'Study of Impact of OBE After A Decade' , 03-06-2020 sehingga 02-06-2022 , Kebangsaan |
Universiti Teknologi MARA , 01-01-2020 sehingga 31-12-2022 , Kebangsaan |
Chief and Lead Assessor for the 186th AUN-QA Programme Assessment at University of Danang, Vietnam , 26-10-2020 sehingga 30-10-2020 , Antarabangsa |
Lead Assessor for the 179th AUN-QA Programme Assessment at Universitas Indonesia, Indonesia , 14-09-2020 sehingga 18-09-2020 , Antarabangsa |
Chief Assessor and Lead Assessor for the 183rd AUN-QA Programme Assessment at Universitas Islam Negeri Maulana Malik Ibrahim Malang, Indonesia , 19-10-2020 sehingga 23-10-2020 , Antarabangsa |
Lead Assessor for the 194th AUN-QA Programme Assessment (Online/Remote Site Visit) at Institut Teknologi Sepuluh Nopember, Indonesia , 14-12-2020 sehingga 18-12-2020 , Antarabangsa |
Lead Assessor for the 172nd AUN-QA Programme Assessment at Universitas Brawijaya, Indonesia , 14-01-2020 sehingga 16-01-2020 , Antarabangsa |
Jawatankuasa Kerja Tetap EAC Standard 2020 , 26-01-2021 sehingga 25-01-2023 , Kebangsaan |
AUN-QA Council , 25-12-2018 sehingga 24-12-2020 , Antarabangsa |
AUN-QA Council , 25-12-2020 sehingga 24-12-2022 , Antarabangsa |
Lead Assessor for the 195th AUN-QA Programme Assessment (Online/Remote Site Visit) at Universitas Negeri Padang, Indonesia , 11-01-2021 sehingga 15-01-2021 , Antarabangsa |
Jawatankuasa Perancangan Strategik Pengukuhan Kursus Mata pelajaran Pengajian Umum (MPU) lnstitusi Pendidikan Tinggi (IPT ) , 14-04-2021 sehingga 13-04-2023 , Kebangsaan |
Permohonan Geran Penyelidikan di bawah Malaysia-France Bilateral Research Collaboration , 28-04-2021 sehingga 27-07-2021 , Kebangsaan |
Jawatankuasa Teknikal Kursus Mata pelajaran Pengajian Umum (MPU) lnstitusi Pendidikan Tinggi Swasta (IPTS) , 03-11-2021 sehingga 02-11-2023 , Kebangsaan |
Panel Auditor bagi Audit Pematuhan Swaakreditasi Universiti Sains Malaysia (USM). , 07-10-2021 sehingga 06-10-2022 , Kebangsaan |
Panel Auditor bagi Audit Pematuhan Swaakreditasi Curtin University Malaysia , 23-09-2021 sehingga 22-09-2022 , Kebangsaan |
Trainer for the Refresher Courses for AUN-QA Assessors , 06-10-2021 sehingga 07-12-2021 , Antarabangsa |
Program Kesedaran SPK ISO9001:2015 Bersama PPQ dan Para Pengurusan UMK , 15-11-2021 sehingga 06-12-2021 , Kebangsaan |
International OBE Symposium 2021 , 27-11-2021 sehingga 28-11-2021 , Antarabangsa |
Bengkel Ahli Panel Penilai Audit Pematuhan Status Swaakreditasi MQA , 26-06-2021 sehingga 26-06-2021 , Kebangsaan |
Virtual Accreditation Visit (VAV): Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia (as Head of Delegation) , 23-08-2021 sehingga 24-08-2021 , Kebangsaan |
Virtual Accreditation Visit (VAV): UOW Malaysia KDU University College at School of Engineering, Glenmarie Campus , 30-09-2021 sehingga 01-10-2021 , Kebangsaan |
Chief and Lead Assessor for the 225th AUN-QA Programme Assessment (Online/Remote Site Visit) at De La Salle Medical and Health Sciences Institute, Manila, Philippines , 02-08-2021 sehingga 06-08-2021 , Antarabangsa |
Lead Assessor for the 211th AUN-QA Programme Assessment (Online/Remote Site Visit) at Hanoi University of Science and Technology, Vietnam , 20-09-2021 sehingga 24-09-2021 , Antarabangsa |
Lead Assessor for the 209th AUN-QA Programme Assessment (Online/Remote Site Visit) at Mapua University, Manila, Philippines , 15-11-2021 sehingga 19-11-2021 , Antarabangsa |
Investigation On Thermodynamic Equilibrium Conditions Of Gas Hydrate Formation In Gas Dominant Multiphase Pipelines , 16-08-2021 sehingga 01-01-1970 , Kebangsaan |
Evaluation of Savonius Wind Turbine Operating at Low Speeds Using CFD , 17-11-2020 sehingga 01-01-1970 , Kebangsaan |
Panel Penilai bagi Permohonan Geran di bawah Malaysia-Spain Joint Programme - Malaysia-Spain Innovating Programme (MySIP) , 21-04-2021 sehingga 22-04-2021 , Kebangsaan |
Semakan Semula Rubrik Penilaian Code Of Practice For Programme Accreditation (COPPA), Code Of Practice For Programme Accreditation - Open And Distance Learning (COPPA: ODL) dan Kod Amalan Akreditasi Program TVET (COPTPA) , 06-09-2021 sehingga 31-12-2022 , Kebangsaan |
Jawatankuasa Penasihat Rayuan Akreditasi Pendidikan Tinggi , 22-06-2022 sehingga 21-06-2024 , Kebangsaan |
Universiti Tenaga Nasional , 01-06-2022 sehingga 31-12-2024 , Kebangsaan |
Multimedia University , 01-06-2022 sehingga 31-05-2025 , Kebangsaan |
Jawatankuasa Penilaian Dana Padanan Penyelidikan (MyPAiR) , 01-05-2021 sehingga 31-12-2022 , Kebangsaan |
Fasilitator Penarafan Institusi Pendidikan Tinggi (SETARA) Malaysia Tahun 2022 , 26-05-2022 sehingga 31-12-2022 , Kebangsaan |
Panel Auditor bagi Audit Pematuhan Swaakreditasi Universiti Tunku Abdul Rahman (UTAR) , 07-11-2022 sehingga 06-11-2023 , Kebangsaan |
Panel Auditor bagi Audit Pematuhan Swaakreditasi International Medical University (IMU). , 30-12-2022 sehingga 29-12-2023 , Kebangsaan |
Panel Auditor bagi Audit Swaakreditasi Tayor's University , 12-07-2023 sehingga 11-07-2024 , Kebangsaan |
Panel Auditor bagi Audit Susulan Pengekalan Swaakreditasi Universiti Sains Malaysia (USM). , 12-07-2023 sehingga 11-01-2024 , Kebangsaan |
Panel Penilai program Bachelor of Mechanical Engineering with Honours, Universiti Teknologi Malaysia (UTM) , 03-01-2023 sehingga 02-07-2023 , Kebangsaan |
Jawatankuasa Panel bagi Kajian Semula Garis Panduan Amalan Baik: Reka Bentuk dan Penyampaian Kurikulum , 18-12-2021 sehingga 31-12-2022 , Kebangsaan |
Jawatankuasa Panel Pakar bagi Kajian Semula Kod Amalan Audit Institusi (COPIA) Edisi Kedua (2009) , 27-09-2023 sehingga 26-09-2025 , Kebangsaan |
Panel Penilai Program Bachelor of Mechatronics Engineering with Honours, UOWM-KDU , 27-06-2023 sehingga 26-12-2023 , Kebangsaan |
Ahli Panel Penilai (APP) Agensi Kelayakan Malaysia (MQA) , 01-06-2023 sehingga 31-05-2026 , Kebangsaan |
Special Advisor to the AUN Executive Director , 01-04-2023 sehingga 31-03-2025 , Antarabangsa |
Sesi Pemantauan Laporan Akhir dan Kewangan bagi Projek Penyelidikan di Bawah Program Malaysia-France Bilateral Research Collaboration (MATCH) 2021 , 13-11-2024 sehingga 14-11-2024 , Kebangsaan |
Audit Susulan Pertimbangan Pengekalan Swaakreditasi Curtin University Malaysia , 25-07-2024 sehingga 25-07-2024 , Kebangsaan |
Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA) , 14-10-2024 sehingga 14-10-2024 , Kebangsaan |
Chief Assessor for the 389th AUN-QA Programme Assessment at Technological Institute of the Philippines , 21-05-2024 sehingga 23-05-2024 , Antarabangsa |
Second Chief Assessor for 9th AUN-QA Institutional Assessment at Lac Hong University, Vietnam , 10-06-2024 sehingga 14-06-2024 , Antarabangsa |
Secondary Atomization Dust Removal Device with Multi-Nozzle Fan Blade Shunt , 06-06-2024 sehingga 01-01-1970 , Kebangsaan |
CFD Simulation and Optimization of CO2 Condensation in a Converging-Diverging Nozzle , 26-09-2024 sehingga 01-01-1970 , Kebangsaan |
Ahli Jawatankuasa Pengurus-PTj UKMFolio , 08-04-2020 sehingga 08-04-2021 , Universiti |
Ahli Jawatankuasa Pusat Kecemerlangan (CoE) Penyelidikan UKM , 01-10-2020 sehingga 30-09-2022 , Universiti |
Ahli Senat Universiti , 01-05-2018 sehingga 30-04-2021 , Universiti |
JAWATANKUASA PASUKAN PEMIKIR: MENINGKATKAN PELAJAR ANTARABANGSA , 01-10-2019 sehingga 30-09-2021 , Universiti |
JAWATANKUASA SIASATAN ADUAN UKM (AI2018-18) , 24-10-2018 sehingga 24-04-2019 , Universiti |
JAWATANKUASA TERAS LESSON , 01-09-2021 sehingga 31-08-2022 , Fakulti / Institut / Pusat Perkhidmatan |
JK Induk SPK PPPS , 26-01-2015 sehingga 30-04-2018 , Universiti |
Jawatankuasa 7th International Conference On Recent Advances In Automotive Engineering & Mobility Research (ReCAR2024) , 02-01-2024 sehingga 31-12-2025 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
Jawatankuasa Induk ISMS UKM , 01-06-2013 sehingga 31-05-2016 , Universiti |
Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Lawatan Latihan Industri Sesi 2023 , 14-08-2023 sehingga 11-10-2023 , Universiti |
Jawatankuasa Majlis Menandatangani Memorandum Perjanjian (Moa) , 21-07-2020 sehingga 21-07-2020 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Majlis Minggu Mesra Mahasiswa Sesi Akademik 2020/2021 , 17-09-2020 sehingga 06-10-2020 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Panel Profesor Pemikir Pelan Strategik FKAB , 01-05-2022 sehingga 30-04-2024 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Pembangunan Modul Pelaksanaan iCGPA dan Bengkel Pembangunan Modul Penyampaian Kurikulum Berasaskan Hasil , 08-08-2017 sehingga 31-12-2018 , Universiti |
Jawatankuasa Pembangunan Modul Penyampaian dan Pengukuran Kursus Citra Kokurikulum dan Keusahawanan , 29-08-2017 sehingga 31-12-2018 , Universiti |
Jawatankuasa Pemilih Kenaikan Pangkat Ke Jawatan Profesor Gred Khas C (VK7) , 30-06-2020 sehingga 30-06-2020 , Universiti |
Jawatankuasa Pemilih Pelantikan Pensyarah Tahun 2020 , 02-07-2020 sehingga 30-10-2020 , Universiti |
Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Kejuruteraan Mekanikal JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Pengurusan Teknologi Industri JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
Jawatankuasa Peperiksaan Lisan Bil. 03/2022 (P.JKMP) , 21-01-2022 sehingga 21-01-2022 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Peraturan Pengajian Diploma Pascasiswazah , 03-05-2016 sehingga 01-01-1970 , Universiti |
Jawatankuasa Persiapan Audit Kualiti Dalaman Bersepadu SPK PPPS FKAB Bagi Tahun 2020 , 15-10-2020 sehingga 12-11-2020 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Persiapan bagi Audit Pensijilan Semula MS ISO 9001:2015 SPK PPPS UKM Oleh Sirim Qas International Sdn. Bhd Tahun 2021 , 01-02-2021 sehingga 25-03-2021 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Persidangan ICEEI 2021 , 01-08-2020 sehingga 01-07-2021 , Universiti |
Jawatankuasa Seminar Teknikal dan Vocational Education And Training (TVET) 2020 , 24-02-2020 sehingga 06-03-2020 , Fakulti / Institut / Pusat Perkhidmatan |
Jawatankuasa Task Force Pembangunan Kerangka Pendidikan Selaras Revolusi Perindustrian Ke-4 UKM , 01-08-2017 sehingga 31-08-2018 , Universiti |
Jawatankuasa Taskforce Pengurusan Peperiksaan Secara Dalam Talian , 01-10-2020 sehingga 30-09-2022 , Universiti |
Jawatankuasa Teknikal Sistem Pelan Penilaian Program Pengajian UKM (iHPP) , 01-12-2014 sehingga 31-12-2025 , Universiti |
Jawatankuasa UKM di 7th International Technical Conference 2023 (ITC2023) , 01-02-2023 sehingga 31-01-2024 , Universiti |
Jawatankuasa Webinar Konsep dan Keperluan OBE , 22-12-2020 sehingga 22-12-2020 , Universiti |
Jawatankuasa Webinar Peperiksaan Akhir dalam Talian: Satu Cabaran, Pelbagai Kemungkinan , 28-04-2020 sehingga 28-04-2020 , Universiti |
Ketua Kumpulan Penyelidikan UKM (KPU UKM) , 21-06-2023 sehingga 21-06-2025 , Universiti |
Mesyuarat Kesepakaran SERI Bil. 3/2021 , 22-11-2021 sehingga 22-11-2021 , Fakulti / Institut / Pusat Perkhidmatan |
PANEL PENILAI JK PATEN 2023 , 14-06-2023 sehingga 14-06-2023 , Universiti |
PANEL PENILAI JK PATEN 2023 , 01-09-2023 sehingga 01-09-2023 , Universiti |
PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2023 , 18-03-2023 sehingga 31-12-2023 , Universiti |
PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2024 , 16-12-2023 sehingga 31-12-2024 , Universiti |
Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2022 , 01-06-2022 sehingga 31-12-2022 , Universiti |
Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2023 , 26-07-2023 sehingga 31-12-2023 , Universiti |
Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2024 , 30-07-2024 sehingga 31-12-2024 , Universiti |
Pasukan Pemikir: Universiti Bertaraf Dunia , 01-06-2020 sehingga 31-05-2022 , Universiti |
Pemikir (Think Tank): Perubahan IVI Ke Institut IR4.0 , 01-10-2019 sehingga 30-09-2021 , Universiti |
Penilai Geran Penyelidikan di bawah Dana RU Tahun 2021 , 01-05-2021 sehingga 31-12-2021 , Universiti |
Program Sijil Profesional Penjaminan Kualiti , 01-01-2021 sehingga 31-12-2024 , Fakulti / Institut / Pusat Perkhidmatan |
SESI AUDIT PENILAIAN PERMOHONAN KUMPULAN PENYELIDIKAN UNIVERSITI (KPU) TAHUN 2023 , 06-04-2023 sehingga 06-04-2023 , Fakulti / Institut / Pusat Perkhidmatan |
Task Force Pengukuhan Agenda Penjanaan FKAB , 25-08-2021 sehingga 24-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |