CURRICULUM VITAE PROF. DR. AZMAN BIN JALAR @ JALIL

Penerbitan Berimpak Tinggi

Naif H. Al-hardan, Muhammad Azmi Abdul Hamid, Mohd Firdaus-raih, Azman Jalar, Ain Zafirah Kamaruddin, Lim Kar Keng, Ensaf Mohammed Al-khalqi, Naser M. Ahmed. (2024). Titanium Dioxide Ion-sensitive Extended Gate Field Effect Transistor (isegfet): Selective Detection Of Potassium Ions In Artificial Blood Serum. - Journal Of Materials Science: Materials In Electronics. 1-16.

Mohamad Solehin Mohamed Sunar, Maria Abu Bakar, Atiqah A., Azman Jalar, Muhamed Abdul Fatah Muhamed Mukhtar, Fakhrozi Che Ani. (2024). Effect Of Pvd-coated Wall Aperture Roughness On The Life Span Of Fine-pitch Stencil Printing. - Soldering & Surface Mount Technology. 51-59.

Wang, L., Jalar, A. & Dan, L. (2023). Dynamic Precipitation And Dynamic Recrystallization Behaviors Of Mg-gd-nd-zr Magnesium Alloy During Thermal Compression Deformation. - Journal Of Materials Research And Technology. 7634-7648.

Naif H M Al-hardan, Muhammad Azmi Abdul Hamid, Azman Jalar, Mohd Firdaus-raih. (2023). Unleashing The Potential Of Gallium Oxide: A Paradigm Shift In Optoelectronic Applications For Image Sensing And Neuromorphic Computing Applications. - Materials Today Physics. 1-24.

Naif H. Al-hardan, Mohd Firdaus-raih, Muhammad Azmi Abdul Hamid, Azman Jalar. (2023). Real-time Viral Detection Through Electrolyte-gated Field Effect Transistors: Possibility Of Rapid Covid-19 Detection. - Critical Reviews In Solid State And Materials Sciences. 194-220.

N.a. Azra, A. Atiqah, A. Jalar, G. Manar, A.b.m. Supian, R.a. Ilyas. (2023). Sustainable Substrate Tin Oxide/nanofibril Cellulose/thermoplastic Starch: Dimensional Stability And Tensile Properties. - Journal Of Materials Research And Technology. 99-108.

Linghao Wang, Azman Jalar, Longhong Dan. (2023). Effect Of Nd On Microstructure And Mechanical Properties Of Mg-7gd-0.5zr Alloy. - Journal Of Alloys And Compounds. 1-14.

Adlil Aizat Ismail, Maria Abu Bakar, Abang Annuar Ehsan, Azman Jalar, John Burke, Zol Effendi Zolkefli, Erwan Basiron. (2022). Effect Of Heat Shield Locations On Rework-induced Thermal Management In Ball Grid Array Solder Joint. - Scientific Reports. 1-12.

Hassan Basher ,muhammad Nubli Zulkifli ,azman Jalar , Michael Daenen. (2022). Temperature Cycling Test On Ultrasonic Aluminum Bonds And Conductive Adhesive Of Copper Indium Gallium (di)selenide (cigs) Thin-film Photovoltaic Solar Panel. - Ieee Journal Of Photovoltaics. 1418-1427.

Maria Abu Bakar, Atiqah Mohd Afdzaluddin, Azman Jalar. (2022). Review On Corrosion In Electronic Packaging Trends Of Collaborative Between Academia-industry. - Sustainability. 1-33.

N.ismail, A.atiqah, A.jalar, M.a.bakar, R.a.a.rahim, A.g.ismail, A.a.hamzah, L.k.keng. (2022). A Systematic Literature Review: The Effects Of Surface Roughness On The Wettability And Formation Of Intermetallic Compound Layers In Lead-free Solder Joints. - Journal Of Manufacturing Processes. 68-85.

Ensaf Mohammed Alkhalqi, Muhammad Azmi Abdul Hamid, Naif H. Alhardan, Lim Kar Keng, Azman Jalar. (2022). Magnesium Doped Zno Nanorod Electrolyte-insulator-semiconductor (eis) Sensor For Detecting Organic Solvents.. - Ieee Sensors Journal. 11783-11790.

Hassan Basher, Muhammad Nubli Zulkifli, Mohd Khairil Rahmat, Muhammad Ghazali Abdul Rahman, Azman Jalar, Michael Daenen. (2021). Bondability Of Ultrasonic Aluminum Bonds On The Molybdenum (de) Selenide And Molybdenum Of Back Contact Layer Of Copper Indium Gallium (de)selenide Cigs Thin Film Photovoltaic Solar Panel. - Solar Energy. 516-522.

Naif H. Al-hardan, Muhammad Azmi Abdul Hamid, Lim Kar Keng, Ensaf Mohammed Al-khalqi, Azman Jalar, Wee Siong Chiu. (2021). Low-cost Fabrication Of A Ph Sensor Based On Writing Directly Over Parchment-type Paper With Pencil. - Journal Of Materials Science: Materials In Electronics. 9431-9439.

Ensaf Mohammed. Al-khalqi, Muhammad Azmi Abdul Hamid, Roslinda Shamsudin, Naif H. Al-hardan, Lim Kar Keng, Azman Jalar. (2021). Zinc Oxide Nanorods Electrolyte Insulator Semiconductor Sensors For Enhanced 2-methoxythanol Selectivity. - Ieee Sensors Journal. 6234-6240.

Naif H. Al-hardan, Muhammad Azmi Abdul Hamid, Mohd Firdaus-raih, Lim Kar Keng, Ensaf Mohammed Al-khalqi, Azman Jalar. (2021). Calcium Ion-selective Electrode Based On The Facile Synthesis Of Cuo Over Cu Wires. - Journal Of Materials Science: Materials In Electronics. 1-12.

Hassan Basher , Muhammad Nubli Zulkifli , Azman Jalar, Michael Daenen. (2021). Effect Of Ultrasonic Bonding Parameters On The Contact Resistance And Bondability Performances Of Cigs Thin Film Photovoltaic Solar Panel. - Ieee Journal Of Photovoltaics. 345-353.

Azman Jalar, Maria Abu Bakar, Roslina Ismail. (2020). Temperature Dependence Of Elastic-plastic Properties Of Fine-pitch Sac 0307 Solder Joint Using Nanoindentation Approach. - Metallurgical And Materials Transactions A-physical Metallurgy And Material. 1221-1228.

A. Atiqah, M.n.m Ansari, M.s.s. Kamal, A. Jalar, N.n. Afeefah, N. Ismail. (2020). Effect Of Alumina Trihydrate As Additive On The Mechanical Properties Of Kenaf Polyester Composite For Plastic Encapsulated Electronic Packaging Application. - Journal Of Materials Research And Technology. 12899-12890.

M. S. Rusdi, M. Z. Abdullah, M. H. H. Ishak, M. S. Abdul Aziz, M. K. Abdullah & P. Rethinasamy, A. Jalar. (2020). Three-dimensional Cfd Simulation Of The Stencil Printing Performance Of Solder Paste. - International Journal Of Advanced Manufacturing Technology. 3351-3359.

Norliza Ismail, Azman Jalar, Maria Abu Bakar, Roslina Ismail, Najib Saedi Ibrahim. (2020). Effect Of Flux Functional Group For Solder Paste Formulation Towards Soldering Quality Of Sac305/cnt/cu. - Soldering & Surface Mount Technology. 157-164.

Norliza Ismail, Azman Jalar, Maria Abu Bakar, Nur Shafiqa Safee, Wan Yusmawati Wan Yusoff, Ariffin Ismail. (2020). Microstructural Evolution And Micromechanical Properties Of Sac305/cnt/cu Solder Joint Under Blast Wave Condition. - Soldering & Surface Mount Technology. 47-56.

Fakhrozi Che Ani, Azman Jalar, Abdullah Aziz Saad, Chu Yee Khor, Roslina Ismail, Zuraihana Bachok, Mohamad Aizat Abas, Norinsan Kamil Othman. (2018). Sac Tio2 Nano Reinforced Lead Free Solder Joint Characterizations In Ultra Fine Package Assembly. - Soldering Surface Mount Technology. 1-13.

F. Che Ani, A. Jalar, A. A. Saad, C. Y. Khor, R. Ismail, Z. Bachok, M. A. Abas & N. K. Othman. (2018). The Influence Of Fe2o3 Nano-reinforced Sac Lead-free Solder In The Ultra-fine Electronics Assembly. - The International Journal Of Advanced Manufacturing Technology. .

Norliza Ismail, Roslina Ismail, Azman Jalar, Ghazali Omar, Emee Marina Salleh, Norinsan Kamil, Irman Abdul Rahman. (2018). Comparative Study Of Interfacial Interaction Between Aromatic And Aliphatic Functional Group In Solder Wettability. - Journal Of Materials Science: Materials In Electronics. .

Izhan Abdullah, Muhammad Nubli Zulkifli, Azman Jalar, R. Ismail. (2018). Deformation Behavior Relationship Between Tensile And Nanoindentation Tests Of Sac305 Lead-free Solder Wire. - Soldering & Surface Mount Technology. 194-202.

Naif H. Al-hardan, Muhammad Azmi Abdul Hamid, Azman Jalar, Roslinda Shamsudin And Norinsan Kamil Othman. (2017). Synthesis Of Magnesium-doped Zno Rods Via Hydrothermal Method: A Study Of The Structural And Optical Properties. - Ecs Journal Of Solid State Science And Technology. 571-577.

Izhan Abdullah, Muhammad Nubli Zulkifli, Azman Jalar, Roslina Ismail,. (2017). Deformation Behaviour Of Sn-3.0 Ag-0.5 Cu (sac305) Solder Wire Under Varied Tensile Strain Rates. - Soldering & Surface Mount Technology. 110-117.

Abdul Aziz M.s., Abdullah M.z., Khor C.y., Jalar A., Che Ani F., Yan N., Cheok C.. (2016). Finite Volume-based Simulation Of The Wave Soldering Process: Influence Of The Conveyor Angle On Pin-through-hole Capillary Flow. - Numerical Heat Transfer; Part A: Applications. 295-310.

Naif H Al Hardan, Muhammad Azmi Abdul Hamid, Naser M Ahmed, Azman Jalar, Roslinda Shamsudin, Norinsan Kamil Othman, Lim Kar Keng, Wee Siong Chiu And Hamzah N. Al Rawi. (2016). High Sensitivity Ph Sensor Based On Porous Silicon (psi) Extended Gate Field Effect Transistor. - Sensors. 1-12.

Farhad Larki, Alam Abedini, Md. Shabiul Islam, Sahbudin Shaari, Sawal Hamid Md Ali, P. Susthitha Menon, Azman Jalar, Elias Saion, Jahariah Sampe, Burhanuddin Yeap Majlis.. (2015). Structural Phase Transformations In Radiolytically Synthesized Al Cu Bimetallic Nanoparticles.. - Journal Of Materials Science. 4348-4356.

Naif H. Al Hardan, Muhammad Azmi Abdul Hamid Naser M. Ahmed, Azman Jalar, Roslinda Shamsudin, Norinsan Kamil Othman, Lim Kar Keng And Sabah M. Mohammed. (2015). A Study On The Uv Photoresponse Of Hydrothermally Grown Zinc Oxide Nanorods With Different Aspect Ratios. - Ieee Sensors Journal. 6811-6818.

M. S. Abdul Aziz, M. Z. Abdullah, C. Y. Khor, A. Jalar, F. Che Ani. (2015). Finite Volume-based Simulation Of The Wave Soldering Process: Influence Of The Conveyor Angle On Pin-through-hole Capillary Flow. - Numerical Heat Transfer, Part A: Applications. 295-310.

Ismail R., Omar G., Jalar A., Majlis B.y.. (2015). The Influence Of Pd-doped Au Wire Bonding On Haz Microstructure And Looping Profile In Micro-electromechanical Systems (mems) Packaging. - Journal Of Electronic Materials. 2507-2513.

Rashita Abd Rashid, Roslinda Shamsudin, Muhammad Azmi Abdul Hamid, Azman Jalar. (2014). In-vitro Bioactivity Of Wollastonite Materials Derived From Limestone And Silica Sand. - Ceramics International. 40:6847-6853.

M.m. Muhammada, M.c. Isa, R. Shamsudin, A. Jalar. (2014). Plasma Spray Deposition Of Fly Ash Onto Mild Steel Substrates Using A Fractional Factorial Design Approach. - Ceramics International. 13635-13642.

Farhad Larki, Arash Dehzangi, Sawal Hamid Md. Ali, Azman Jalar, Md. Shabiul Islam, Mohd Nizar Hamidon, Burhanuddin Yeop Majlis. (2014). Effect Of Geometric Parameters On The Performance Of P-type Junctionless Lateral Gate Transistors. - Plos One. 1-9.

Farhad Larki, Arash Dehzangi, Sawal Hamid Md. Ali, Azman Jalar, Md. Shabiul Islam, Mohd Nizar Hamidon, Burhanuddin Yeop Majlis.. (2014). Effect Of Geometric Parameters On The Performance Of P-type Junctionless Lateral Gate Transistors.. - Plos One. 9(4): 1-9.

N.h. Al-hardan, Azman Jalar, M.a. Abdul Hamid, Lim Kar Keng, R Shamsudin, B.y. Majlis. (2014). The Room-temperature Sensing Performance Of Zno Nanorods For 2-methoxyethanol Solvent. - Sensors And Actuators B: Chemical. 223-228.

M.s. Abdul Aziz, M.z. Abdullah, C.y. Khor, A. Jalar, F. Che Ani. (2014). Cfd Modeling Of Pin Shape Effects On Capillary Flow During Wave Soldering. - International Journal Of Heat And Mass Transfer. 400-410.

Wan Yusmawati Wan Yusoff, Roslina Ismail, Azman Jalar, Norinsan Kamil Othman, Irman Abdul Rahman. (2014). Microstructural Evolution And Micromechanical Properties Of Gamma-irradiated Au Ball Bonds. - Material Characterization. 129-135.

N.h Al Hardan, Azman Jalar, M.a. Abdul Hamid, Lim Kar Keng, N.m. Ahmed, R. Shamsudin. (2014). A Wide -band Uv Photodiode Based On N-zno/p-si Heterojunctions. - Sensors And Actuators A:physical. 61-66.

N.h Al Hardan, Azman Jalar, M.a. Abdul Hamid, Lim Kar Keng And R. Shamsudin. (2013). Structural And Optical Properties Of A Bi Structured Zno Film Prepared Via Electrodeposition. - International Journal Of Electrochemical Science. 8:6767-6774.

Denni Asra Awizar, Norinsan Kamil Othman, Azman Jalar, Abdul Razak Daud, I. Abdul Rahman1 Dan N. H. Al-hardan. (2013). Nanosilicate Extraction From Rice Husk Ash As Green Corrosion Inhibitor. - International Journal Of Electrochemical Science. 8(2):1759-1769.

Zulkifli, Muhammad Nubli; Jalar, Azman; Abdullah, Shahrum; Rahman, Irman Abdul; Hamid, Muhammad Azmi Abdul. (2013). Strength Distribution Of Au Ball Bond Using Nanoindentation Approach. - Materials Science And Engineering A. 577:189-196.

N.h.al Hardan, M.a.abdul Hamid, Azman Jalar, Lim Karkeng, R.shamsudin And B.y. Majlis. (2013). Bi-structure Zno Prepared Via Cathodic Electrodeposition Method. - International Journal Of Electrochemical Science. 8: 2430-2439.

Zulkifli, M.n., Jalar, A., Abdullah, S., Rahman, I.a., Othman, N.k.. (2013). Effect Of Applied Load In The Nanoindentation Of Gold Ball Bonds. - Journal Of Electronic Materials. 42(6):1063-1072.

Muhammad Nubli Zulkifli, Shahrum Abdullah, Norinsan Kamil Othman, Azman Jalar. (2012). Some Thoughts On Bondability And Strength Of Gold Wire Bonding. - Gold Bulletin. 45:115-125.

Muhammad Azmi Abdul Hamid, Maria Abu Bakar, Azman Jalar, Roslinda Shamsudin. (2012). Substrate Dependence Of The Properties Of Mgo Films Produced Using An Aqueous Chemical Growth Method. - Current Nanoscience. 8(1):50-54.

Penerbitan WOS

Maria Abu Bakar, Mohamad Solehin Mohamed Sunar, Azman Jalar, A Atiqah, Fakhrozi Che Ani, Ibrahym Ahmad, Zol Effendi Zolkefli. (2023). Effect Of Sn Plating Thickness On Wettability, Solderability, And Electrical Connections Of Electronic Lead Connectors For Surface Mount Technology Applications. - Sains Malaysiana. 3247-3258.

Ensaf Mohammed. Al-khalqi, Muhammad Azmi Abdul Hamid, Naif H. Al-hardan, Lim Kar Keng, Azman Jalar. (2022). Magnesium-doped Zno Nanorod Electrolyte Insulator Semiconductor (eis) Sensor For Detecting Calcium Ions. - Journal Of Materials Science: Materials In Electronics. 1618-1630.

Abdul A Omar, Azman Jalar, Maria A Bakar, Khirullah A Hamid. (2022). Sulfur Ingression On Encapsulated Leadframe Of Discrete Semiconductor Package. - Ieee Transactions On Components, Packaging And Manufacturing Technology. 544-550.

Mohamad Solehin Mohamed Sunar, Maria Abu Bakar, Azman Jalar, Mohamad Riduwan Ramli, Fakhrozi Che Ani. (2022). Effect Of Alloy Particle Size And Stencil Aperture Shape On Solder Printing Quality. - Microelectronics International. 81-90.

Fateh Amera Mohd Yusoff, Maria Abu Bakar, Azman Jalar. (2022). Kesan Rawatan Termomekanik Dengan Mampatan Tunggal Terhadap Mikrostruktur Dan Sifat Mikromekanik Aloi Pateri Sn-0.7cu. - Sains Malaysiana. 3775-3784.

Fateh Amera Mohd Yusoff, Maria Abu Bakar, Azman Jalar. (2022). Temperature-induced Thickness Reduction Of Micromechanical Properties Of Sn-0.7cu Solder Alloy. - Materiali In Tehnologije, Materials And Technology. 373-379.

Adlil Aizat Ismail, Maria Abu Bakar, Abang Annuar Ehsan, Azman Jalar, Erwan Basiron, Fakhrozi Che Ani. (2022). Cardinal And Ordinal Directions Approach In Investigating Arrayed Solder Joints Crack Propagation Of Ball Grid Array Semiconductor Packages. - Ieee Transactions On Components Packaging And Manufacturing Technology. 1492-1501.

Syed Mohamad Mardzukey Syed Mohamed Zain, Azman Jalar, Maria Abu Bakar, Fakhrozi Che Ani, Mohamad Riduwan Ramli. (2021). Horizontal Crack Induced Vertical Crack Formation In Epoxy Mold Compound For Electronic Packaging. - Journal Of Microelectronics, Electronic Components And Materials. 261-266.

Nurul Adlin Mahadzir, Angela Amphawan, Tendai Masunda, P. Susthitha Menon, Azman Jalar, Maria Abu Bakar, Ahmad Ghadafi Ismail. (2021). Tapered Waveguide Design For Mode Conversion In Mode Division Multiplexing (mdm). - Optoelectronics And Advanced Materials Rapid Communications. 325-331.

Norliza Ismail, Azman Jalar, Atiqah Afdzaluddin, Maria Abu Bakar. (2021). Electrical Resistivity Of Sn 3.0 Ag 0.5cu Solder Joint With The Incorporation Of Carbon Nanotubes. - Nanomaterials And Nanotechnology. 1-9.

Rabiah Al Adawiyah Ab Rahim, Muhammad Nubli Zulkifli, Azman Jalar, Atiqah Mohd Afdzaluddin, Kim Siow Shyong. (2020). Effect Of Isothermal Aging And Copper Substrate Roughness On The Sac305 Solder Joint Intermetallic Layer Growth Of High Temperature Storage (hts). - Sains Malaysiana. 3045-3054.

Norliza Ismail, Azman Jalar, Wan Yusmawati Wan Yusoff, Nur Shafiqa Safee, Ariffin Ismail. (2020). Effect Of Shock Wave On Constant Load Behaviour Of Pb-free/cnt Solder Joint. - Sains Malaysiana. 3037-3044.

M. A.fatah M. Mukhtar, A. Abas, M. S. Haslinda, F. Che Ani, Azman Jalar @ Jalil, A. A. Saad, M. Z. Abdullah, R. Ismail. (2019). Effect Of Different S Ac Based Nanoparticles Types On The Reflow Soldering Process Of Miniaturized Component Using Discrete Phase Model Simulation. - Journal Of Applied Fluid Mechanics. 1683-1696.

Izhan Abdullah, Muhammad Nubli Zulkifli, Azman Jalar @ Jalil, Roslina Ismail, Mohd Arrifin Ambak. (2019). Relationship Of Mechanical And Micromechanical Properties With Microstructural Evolution Of Sn-3.0ag-0.5cu (sac305) Solder Wire Under Varied Tensile Strain Rates And Temperatures. - Journal Of Electronic Materials. 2826-2839.

Muhammad Nubli Zulkifli, Fuaida Harun, Azman Jalar @ Jalil. (2019). Effect Of Surface Roughness And Hardness Of Leadframe On The Bondability Of Gold Wedge Bonds. - Microelectronics International. 62-67.

Norliza Ismail, Azman Jalar, Maria Abu Bakar, Roslina Ismail, Nur Shafiqa Safee, Ahmad Ghadafi Ismail, Najib Saedi Ibrahim. (2019). Kesan Penuaan Sesuhu Terhadap Sifat Mikro Kekerasan Pempaterian Sn-ag-cu/cnt/cu Menggunakan Pelekukan Nano. - Sains Malaysiana. 1267-1272.

Muhammad Nubli Zulkifli, Azman Jalar @ Jalil, Fuaida Harun. (2019). Effect Of Conventional And Granular Capillaries Usage On The Bondability, Reliability, And Manufacturability Of Gold Wedge Bonds. - Ieee Transactions On Components Packaging And Manufacturing Technology. 763-769.

Mohd Adly Rahmat Saat, Rozaidi Rasid, Maria Abu Bakar, Azman Jalar, Emee Marina Salleh. (2019). Mechanical Properties Of Pe-pet-ps-pp Blends Produced By High Shear Mixing. - Polimery. 676-679.

Wan Yusmawati Wan Yusoff, Norliza Ismail, Nur Shafiqa Safee, Ariffin Ismail, Azman Jalar, Maria Abu Bakar. (2019). Correlation Of Microstructural Evolution And Hardness Properties Of 99.0sn-0.3ag-0.7cu (sac0307) Lead-free Solder Under Blast Wave Condition. - Soldering & Surface Mount Technology. 102-108.

Maria Abu Bakar, Azman Jalar, Wan Yusmawati Wan Yusoff, Nur Shafiqa Safee, Ariffin Ismail, Norliza Ismail, Emee Marina Salleh, Najib Saedi Ibrahim. (2019). Kesan Gelombang Kejutan Terhadap Sifat Mikromekanik Sambungan Pateri Sac 0307/enig Menggunakan Pendekatan Pelekukan Nano. - Sains Malaysiana. 1273-1279.

Maria Abu Bakar, Azman Jalar & Roslina Ismail. (2018). Kesan Pigmen Pewarna Terhadap Pertumbuhan Sebatian Antara Logam Sambungan Pateri. - Sains Malaysiana. .

Azman Jalar, Maria Abu Bakar, Roslina Ismail, Najib Saedi Ibrahim, Mohd Ariffin Ambak. (2018). Kesan Pigmen Pewarna Terhadap Pertumbuhan Sebatian Antara Logam Sambungan Pateri Sn-3.0ag-0.5cu. - Sains Malaysiana. .

Maria Abu Bakar, Azman Jalar & Roslina Ismail. (2018). Kesan Kemasan Permukaan Berbeza Terhadap Sifat Mikromekanik Sambungan Pateri Sac 0307 Menggunakan Pendekatan Pelekukan Nano. - Sains Malaysiana. .

Emee Marina Salleh, Zaifol Samsu, Norinsan Kamil Othman, Azman Jalar. (2018). Kesan Suhu Celupan Ke Atas Mikrostruktur Dan Kekerasan Salutan Aluminium Pada Keluli Karbon. - Sains Malaysiana. .

Zuraihana Bachok, Abdullah Aziz Saad,fakhrozi Che Ani,azman Jalar, Mohamad Aizat Abas. (2018). Structural Assessment Of Lead Free Solder Joint Of Miniaturized Electronics Assembly. - International Journal Of Integrated Engineering. .

Maria Abu Bakar, Azman Jalar, Roslina Ismail. (2018). Penilaian Semula Pengukuran Kuantitatif Stereometri Terhadap Pertumbuhan Sebatian Antara Logam Bagi Sambungan Pateri. - Sains Malaysiana. .

Maria Abu Bakar, Azman Jalar, Mohd Zulkifly Abdullah, Najib Saedi Ibrahim, Mohd Ariffin Ambak. (2018). Controlling Of Intermetallic Compound Solder Interconnection-printed Circuit Board Using Nickel Coating. - Sains Malaysiana. .

Nor Rahafza Abdul Manap, Roslinda Shamsudin, Mohd Norhafsam Maghpor, Muhammad Azmi Abdul Hamid, Azman Jalar. (2018). Adsorption Isotherm And Kinetic Study Of Gas-solid System Of Formaldehyde On Oil Palm Mesocarp Bio-char: Pyrolysis Effect. - Journal Of Environmental Chemical Engineering. .

Maria Abu Bakar, Azman Jalar, Mohd Zulkifly Abdullah, Najib Saedi Ibrahim & Mohd Ariffin Ambak. (2018). Pengawalan Pertumbuhan Sebatian Antara Logam Sambungan Pateri-papan Litar Bercetak Menggunakan Salutan Nikel. - Sains Malaysiana. .

Emee Marina Salleh, Norinsan Kamil Othman & Azman Jalar. (2018). Electrochemical Migration Behaviour Of Sac305 Solder In Various Concentrations Of Sodium Hydroxide Solution. - Sains Malaysiana. .

Norliza Ismail, Azman Jalar, Maria Abu Bakar, Roslina Ismail. (2018). Kesan Penambahan Tiubnano Karbon Terhadap Pertumbuhan Lapisan Sebatian Antara Logam Sistem Pateri Sn-ag-cu/cu Akibat Penuaan Terma. - Sains Malaysiana. .

Nor Rahafza Abdul Manap, Roslinda Shamsudin, Mohd Norhafsam Maghpor, Muhammad Azmi Abdul Hamid & Azman Jalar. (2017). Sifat Kinetik Dan Isoterma Penjerapan Formaldehid Ke Atas Komposit Serbuk Serat Kelapa Sawit-tio2. - Sains Malaysiana. 953-965.

Nnm Fedzir, Wyw Yusoff, A Jalar. (2017). Effect Of Substrate Pre-soldering Temperature On Wettability Of Sac387 Lead-free Solder. - Journal Of Fundamental And Applied Sciences. 154-166.

Arash Dehzangi, Farhad Larki And Sawal Hamid Md Ali, Sabar Derita Hutagalung, Md Shabiul Islam, Mohd Nizar Hamidon, Susthitha Menon And Azman Jalar, Jumiah Hassan, Burhanuddin Yeop Majlis.. (2016). Study Of The Side Gate Junctionless Transistor In Accumulation Region.. - Microelectronics International. 61-67.

M S Abdul Aziz, M Z Abdullah, C Y Khor, A Jalar, M A Bakar, W Y W Yusoff, F Che Ani, Nobe Yan, M Zhou & C Cheok. (2015). Effects Of Pcb Thickness On Adjustable Fountain Wave Soldering. - Sadhana. 2197-2220.

Solhan Yahya , Norinsan Kamil Othman , Abdul Razak Daud , Azman Jalar , Roslina Ismail. (2015). The Influence Of Temperature On The Inhibition Of Carbon Steel Corrosion In Acidic Lignin. - Anti-corrosion Methods And Materials. 301-306.

Fuaida Harun, Roslina Ismail, Azman Jalar, Shahrum Abdullah. (2015). Effect Of Wire Diameter And Hook Location On Second Bond Failure Modes. - Microelectronics International. 32-36.

F Che Ani, A Jalar, R Ismail, Nk Othman, Mz Abdullah, Ms Abdul Aziz, Cy Khor, M Abu Bakar. (2015). Reflow Optimization Process: Thermal Stress Using Numerical Analysis And Intermetallic Spallation In Backwards Compatibility Solder Joints. - Arabian Journal For Science And Engineering. 1669-1679.

Nurul Atikah Sharif, Azaman Jalar, Muhamad Izhar Sahri, Norinsan Kamil Othman. (2014). Effect Of High Temperature Corrosion On Austenitic Stainless Steel Grade 304 In Co2 Gas At 700�c. - Sains Malaysiana. 1069-1075.

Azman Jalar, Nur Azida Che Lah, Norinsan Kamil Othman, Roslinda Shamsudin, Abdul Razak Daud, And Syed Roslee Sayd Bakar. (2014). Characterization Of Oxide Growth On Surface Of Al-mg-si Welded Joint. - Advances In Materials Science And Engineering. 1-10.

N. Mohamad, A. Jalar & N.k. Othman. (2014). Surface Morphology Study On Aluminum Alloy After Treated With Silicate-based Corrosion Inhibitor From Paddy Residue. - Sains Malaysiana. 935-940.

M. S. Abdul Aziz, M. Z. Abdullah, C. Y. Khor, A. Jalar, M. A. Bakar, W. Y. W. Yusoff, F. Che Ani, N. Yan, M. Zhou, C. Cheok. (2014). Implications Of Adjustable Fountain Wave In Pin Through Hole Soldering Process. - Arabian Journal For Science And Engineering. 9101-911.

Yahya S., Othman N.k., Daud A.r., Jalar A.. (2014). Effect Of Scan Rate On Corrosion Inhibition Of Carbon Steel In The Presence Of Rice Straw Extract - Potentiodynamic Studies. - Sains Malaysiana. 1083 - 1087.

Siew Peng Foo, Wan Yusmawati Wan Yusoff & Azman Jalar. (2014). Dimensional And Structural Stability Of Gamma Irradiated Stacked Die Quad Flat No Leads (qfn). - Sains Malaysiana. 827-832.

Solhan Yahya, Norinsan Kamil Othman, Abd Razak Daud, Azman Jalar. (2014). Effect Of Scan Rate On Corrosion Inhibition Of Carbon Steel In The Presence Of Rice Straw Extract-potentiodynamic Studies. - Sains Malaysiana. 1083-1087.

S. Yahya, N.k. Othman*, A.r. Daud & A. Jalar. (2013). Surface Morphology Studies Of Low Carbon Steel Treated In Aqueous Lignin. - Sains Malaysiana. 42(12):1793-1798.

Victor Lim, Nowshad Amin, C.s. Foong, Ibrahim Ahmad, Azami Zaharim, Rozaidi Rasid & Azman Jalar. (2011). Kesan Teknik Pengaktifan Bermangkin Berbeza Terhadap Prestasi Terma Penyebar Haba Cip Balikan. - Sains Malaysiana. 40(2):181-190.

Lim, V; Amin, N; Foong, Cs; Ahmad, I; Zaharim, A; Rasid, R; Jalar, A. (2011). Effects Of Different Catalytic Activation Techniques On The Thermal Performance Of Flip Chip Heat Spreader[kesan Teknik Pengaktifan Bermangkin Berbeza Terhadap Prestasi Terma Penyebar Haba Cip Balikan. - Sains Malaysiana. 40(2):181-190.

Z. Kornain, A. Jalar, R. Rashid , S. Abdullah, B. Lee. (2010). Comparative Study Of Phenolic-based And Amine-based Underfill Materials In Flip Chip Plastic Ball Grid Array Package. - Journal Of Electronic Packaging, Transactions Of The Asme. 132(4):1012-1017.

Saud, N., Jalar, A.. (2010). Sn-rich Phase Coarsening During Isothermal Annealing For As-soldered Sn-ag-cu Solder. - Journal Of Materials Science: Materials In Electronics. 21(10):1083-1089.

Abdullah, S; Ariffin, Ak; Nizwan, Cke; Abdullah, Mf; Jalar, A; Yunoh, Mfm. (2010). Failure Analysis Of A Semiconductor Packaging Leadframe Using The Signal Processing Approach. - International Journal Of Modern Physics B. 24(1-2):175-172.

Hoh Huey Jiun, Ibrahim Ahmad, Azman Jalar And Ghazali Omar. (2006). Effect Of Laminated Wafer Toward Dicing Process And Alternative Double Pass Sawing Method To Reduce Chipping. - Ieee Transactions On Electronic Packaging Manufacturing. 29(1):17-24.

Penerbitan SCOPUS/ERA

Nik Athirah Azzra, Atiqah Afdzaluddin, Azman Jalar, Ahmad Ghadafi Ismail, Zahra Dashtizadeh. (2024). Physical And Electrical Properties Of Sustainable Substrate Thermoplastic Starch/nanocellulose Fibre/stannous Oxide. - Journal Of Advanced Research In Applied Sciences And Engineering Technology. 93-101.

N. A. Azra, A. Atiqah, H. Fadhlina, M. A. Bakar, A. Jalar, R. A. Ilyas, J. Naveen, F. A. Sabaruddin, K. K. Lim, M. Asrofi. (2023). Oil-palm Based Nanocellulose Reinforced Thermoplastic Polyurethane For Plastic Encapsulation Of Biomedical Sensor Devices: Water Absorption, Thickness Swelling And Density Properties. - Applied Science And Engineering Progress. 1-9.

Linghao Wang, Azman Jalar, Longhong Dan. (2023). Effect Of Nd On Microstructure And Mechanical Properties Of Mg-7gd-0.5zr Alloy. - Journal Of Alloys And Compounds. 1-14.

Saraswathy Supramaniam, Maria Abu Bakar, A. Atiqah, Azman Jalar, Mohd Zulhakimi Ab. Razak. (2023). Moisture Content And Early Corrosion Detection Of Cu Wire Bonding In A Semiconductor Package. - Journal Of Failure Analysis And Prevention. 2362-2369.

Saraswathy Supramaniam, Maria Abu Bakar, Azman Jalar. (2022). Early Corrosion Detection Of Cu-ag Wedge Bonding In Semiconductor Package. - Journal Of Failure Analysis And Prevention. 2317-2325.

Maria Abu Bakar, Atiqah Mohd Afdzaluddin, Azman Jalar. (2022). Review On Corrosion In Electronic Packaging Trends Of Collaborative Between Academia-industry. - Sustainability. 1-33.

Abdul A. Omar, Azman Jalar, Khirullah A.hamid. (2022). Evolution Of Discrete Semiconductor Copper Wedge Bond In Biased Temperature Humidity Chamber. - Jurnal Teknologi. 129-135.

Fateh Amera Mohd Yusoff, Azman Jalar. (2022). Influence Of Thermomechanical Processing On Micromechanical Properties Of Sn-0.7cu Solder Alloy Via Nanoindentation Approach. - Jurnal Teknologi. 25-31.

Nur Farisa Nadia Mohmad Lehan, Wan Yusmawati Wan Yusoff, Ku Zarina Ku Ahmad, Norliza Ismail, Azuraida Amat, Nor Azlian Abdul Manaf, Mohamad Faizal Abdullah, Azman Jalar, Irman Abdul Rahman, Emee Marina Salleh. (2022). Influence Of Gamma Radiation On Eutectic Phase Area And Hardness Properties Of Sac305 Solder. - Jurnal Teknologi. 113-118.

A. S Ashikin, G. Omar, N. Tamaldin, S. Jasmee, H. A Hamid, A. Jalar, F. Che Ani. (2020). Thermo-mechanical And Adhesion Performance Of Silver-filled Conductive Polymer Composite (sfcp) Using Thermoplastic Polyurethane (tpu) Substrate. - International Journal Of Nanoelectronics And Materials. 419-430.

Hazian Mamat, Azman Jalar, Maria Abu Bakar. (2019). Characterization On Ph-isfet Poly Bisphenol Hydrophobic Encapsulation Material. - Asm Science Journal. 65-70.

Izhan Abdullah, Azman Jalar, Roslina Ismail, Maria Abu Bakar, Muhammad Nubli Zulkifli,emee Marina Salleh. (2019). Effect Of Tensile Direction On Microstructure Evolution Of Sac305 Solder Wire. - Asm Science Journal. 53-59.

Mohd Adly Rahmat Saat, Rozaidi Rasid, Maria Abu Bakar, Azman Jalar, Emee Marina Salleh. (2019). Mechanical Properties Of Pe-pet-ps-pp Blends Produced By High Shear Mixing. - Polimery. 676-679.

Emee Marina Salleh, Norinsan Kamil Othman & Azman Jalar. (2018). Electrochemical Migration Behaviour Of Sac305 Solder In Various Concentrations Of Sodium Hydroxide Solution. - Sains Malaysiana. .

F. Che Ani, A. Jalar, R. Ismail, Z. Mustafa, A.a. Saad, C.y. Khor, N. K. Othman, M.y. Tura Ali, M.a.fatah M.mukhtar, Aizat Aba. (2018). Tio2 Nanoparticles Reinforced Lead Free 96.5 Sn 3.0ag 0.5cu Solder Paste For Ultra Fine Package Assembly In Reflow Soldering Process. - Journal Of Advanced Manufacturing Technology. .

Maria Abu Bakar, Azman Jalar, Roslina Ismail. (2018). Penilaian Semula Pengukuran Kuantitatif Stereometri Terhadap Pertumbuhan Sebatian Antara Logam Bagi Sambungan Pateri. - Sains Malaysiana. .

Emee Marina Salleh, Zaifol Samsu, Norinsan Kamil Othman, Azman Jalar. (2018). Kesan Suhu Celupan Ke Atas Mikrostruktur Dan Kekerasan Salutan Aluminium Pada Keluli Karbon. - Sains Malaysiana. .

Maria Abu Bakar, Azman Jalar & Roslina Ismail. (2018). Kesan Pigmen Pewarna Terhadap Pertumbuhan Sebatian Antara Logam Sambungan Pateri. - Sains Malaysiana. .

Wilfred Paulus, Irman Abdul Rahman, Azman Jalar, Norinsan Kamil Othman, Roslina Ismail, Wan Yusmawati Wan Yusoff, Maria Abu Bakar. (2017). The Relationship Between Xrd Peak Intensity And Mechanical Properties Of Irradiated Lead-free Solder. - Materials Science Forum. 423-427.

Bakar M.a., Jalar A., Daud A.r., Ismail R., Lah N.a.c., Ibrahim N.s.. (2016). Nanoindentation Approach On Investigating Micromechanical Properties Of Joining From Green Solder Materials. - Sains Malaysiana. 1275-1279.

Che Ani F., Jalar A., Ismail R., Othman N.k., Khor C.y., Samsudin Z., Abdullah M.z., Azmi A.. (2016). Backward Compatibility Solder Joint Formation At High Peak Reflow Temperature For Aerospace Applications. - Arabian Journal For Science And Engineering. 1813-1823.

Nor Rahafza Abdul Manap, Roslinda Shamsudin, Mohd Norhafsam Maghpor, Muhammad Azmi Abdul Hamid, Azman Jalar. (2016). Effect Of Palm Oil Fiber-tio2 Ratio In The Composite On The Reduction Of Btx And Formaldehyde In The Air. - Malaysian Journal Of Analytical Sciences. 324-328.

M Z Muzakkar, S.ahmad, M A Yarmo, A Jalar, M Bijarimi, Ratna. (2015). Increasing The Polarity Of The Aluminum Surface And Tpenr Matrix With The Addition 3-gps And Pe-g-mah As A Coupling Agent To Improve The Lap Shear Strength Of Al-tpenr Laminated Composit. - Asian Journal Of Applied Sciences. 642-651.

Muhammad M.m., Jalar A., Shamsudin R., Isa M.c.. (2015). Evaluation Of The Suitability Of Fly Ash Powder For Atmospheric Plasma Spray. - Defence S And T Technical Bulletin. 1-8.

Muzakkar M.z., Ahmad S., Yarmo M.a., Jalar A., Bijarimi M.. (2015). Shear Strength Of Single Lap Joint Aluminium-thermoplastic Natural Rubber (al-tpnr) Laminated Composite. - Springer Series In Materials Science. 159-171.

Roslina Ismail, Fuaida Harun, Muhammad Nubli Zulkifli, Azman Jalar, Maria Abu Bakar, And Shahrum Abdullah. (2015). Bondability Of Second Copper Wire Bonds On Silver And Nickel Palladium Gold Silver Metallization. - Ieee Transactions On Components, Packaging And Manufacturing Technology. 1541-1545.

Fuaida Harun, Roslina Ismail, Azman Jalar, Shahrum Abdullah. (2015). Effect Of Wire Diameter And Hook Location On Second Bond Failure Modes. - Microelectronics International. 32-36.

Ang Lingyuen, Norinsan Kamil Othman, Azman Jalar, Ismayadi Ismail. (2015). The Effect Of Magnetic Field On Corrosion Inhibitor Of Copper In 0.5 M Nacl Solution. - American-eurasian Journal Of Sustainable Agriculture. 35-38.

Siew Peng Foo, Wan Yusmawati Wan Yusoff & Azman Jalar. (2014). Dimensional And Structural Stability Of Gamma Irradiated Stacked Die Quad Flat No Leads (qfn). - Sains Malaysiana. 827-832.

Mohd Moesli Muhammad, Mahdi Che Isa, Azman Jalar, Roslinda Shamsudin, Syed Rosli Sayd Bakar, Mohd Subhi Din Yati, Nik Hassanuddin Nik Yussof & Hasril Naim. (2014). Study On The Effects Of Atmospheric Plasma Spray (aps) Process Parameters On Porosities Of Fly Ash Deposited Coatings. - Defence S&t Technical Bulletin / Science & Technology Research Institute For Defence (stride). 73-80.

Rabiahtul Zulkafli, Norinsan Kamil Othman*, Irman Abdul Rahman, Azman Jalar. (2014). Effect Of Rice Straw Extract And Alkali Lignin On The Corrosion Inhibition Of Carbon Steel. - The Malaysian Journal Of Analytical Sciences. 204-211.

N. Mohamad, A. Jalar & N.k. Othman. (2014). Surface Morphology Study On Aluminum Alloy After Treated With Silicate-based Corrosion Inhibitor From Paddy Residue. - Sains Malaysiana. 935-940.

Hazian Mamat, Azrul Azlan Hamzah, Azman Jalar, Jumril Yunas, Nurfirdaus A. Rahim. (2013). A Comsol Model To Analyse The Structural Mechanical Problem In An Electrostatically Controlled Prestressed Micro-mirror. - World Applied Sciences Journal. 26(7): 950-956.

Zulkifli, M.n., Jalar, A., Abdullah, S., Rahman, I.a., Othman, N.k.. (2013). Effect Of Applied Load In The Nanoindentation Of Gold Ball Bonds. - Journal Of Electronic Materials. 42(6):1063-1072.

M.a Bakar, M.a.a Hamid, A. Jalar And R. Shamsudin. (2013). Morphology And Optical Prpoperties Of Zinc Oxide Films Grown On Metal Coated Glass Substrates By Aqueous Chemical Growth.. - Journal Of Physics:conference Series. 431:012004.

S. Yahya, N.k. Othman*, A.r. Daud & A. Jalar. (2013). Surface Morphology Studies Of Low Carbon Steel Treated In Aqueous Lignin. - Sains Malaysiana. 42(12):1793-1798.

Muhammad Nubli Zulkifli, Shahrum Abdullah, Norinsan Kamil Othman, Azman Jalar. (2012). Some Thoughts On Bondability And Strength Of Gold Wire Bonding. - Gold Bulletin. 45:115-125.

Wan Yusmawati Wan Yusoff, Azman Jalar, Norinsan Kamil Othman, Irman Abdul Rahman. (2011). Effect Of Gamma-irradiation Towards Stress-strain Curve Of Single Die Qfn Package. - Materials Science Forum. 694:620-624.

C.l. Nur Azida, A. Jalar, N.k. Othman, A.r. Daud. (2011). Oxidation Effect On Welded Aa6061 Al Alloy Using Er4043 Filler Metal. - Journal Of Applied Mechanics And Materials. 66-68:46-49.

Saud, N., Jalar, A.. (2010). Sn-rich Phase Coarsening During Isothermal Annealing For As-soldered Sn-ag-cu Solder. - Journal Of Materials Science: Materials In Electronics. 21(10):1083-1089.

M. F. M. Yunoh, S. Abdullah And A. Jalar. (2010). Mechanical Properties Of Qfn Semiconductor Package Using Flexural Test. - World Applied Sciences Journal. 9:40-42.

U. Mokhtar, R. Rasid, S. Ahmad And A. Jalar. (2010). Effects Of Rubber-modified On Thermal And Mechanical Properties Of Epoxy Mold Compound. - Solid State Science And Technology. 18(1):27-35.

H. Budiman, M. Z. Omar, A. Jalar. (2010). Effect Of Slope Length To The Sphericity Of A356 Aluminium Alloy. - International Review Of Mechanical Engineering (i.re.m.e.). 4(7):840-845.

S. Abdullah, M. F. Abdullah, A. K. Ariffin, A. Jalar. (2009). Effect Of Leadframe Oxidation On The Reliability Of A Quad Flat No-lead Package. - Journal Of Electronic Packaging (transaction Of The Asme). 131(3):0310021-0310027.

Budiman H., Omar M.z., Jalar A., Jaharah A.g.. (2009). Effect Of Water Cooling On The Production Of Al-si Thixotropic Feedstock By Cooling Slope Casting. - European Journal Of Scientific Research. 32(2):158-166.

Norliza Ismail, Muhammad Azmi Abdul Hamid & Azman Jalar. (2009). Microstructural Characterization Of Au-in Thin Film Deposited By Electron Beam Evaporation. - Sains Malaysiana. 38(1):91-94.

Abdullah S., Yunoh M.f.m., Kamarudin H., Jalar A.. (2009). Role Of Strain Rate On The Micromechanical Characterization Properties Of 4n Gold Micro Wire: Micro Tensile And Nanoindentation. - European Journal Of Scientific Research. 28(1):33-43.

Abdullah S., Abdullah M.f., Ariffin A.k., Jalar A.. (2009). Thermal-mechanical Analysis Of A Different Leadframe Thickness Of Semiconductor Package Under The Reflow Process. - American Journal Of Applied Sciences. 6(4):616-625.

Saud N., Jalar A.. (2009). Sn-rich Phase Coarsening During Isothermal Annealing For As-soldered Sn-ag-cu Solder. - Journal Of Materials Science: Materials In Electronics. 21(10):1083-1089.

Karen M.c. Wong, A.r. Daud, And Azman Jalar. (2009). Microhardness And Tensile Properties Of A 6xxx Alloy Through Minor Additions Of Zr. - Journal Of Materials Engineering And Performance. 18(1):62-65.

Fatimah Hasim S.n., Abdul Hamid M.a., Shamsudin R., Jalar A.. (2009). Synthesis And Characterization Of Zno Thin Films By Thermal Evaporation. - Journal Of Physics And Chemistry Of Solids. 70(12):1501-1504.

S. Abdullah, Z. Endut, I. Ahmad, A. Jalar And S. M. Yusof. (2008). Dicing Laminated Wafer For Qfn 3d Stacked Die Packaging.. - Advanced Materials Research. 31:202-205.

A. Jalar, M. F. Rosle, M. A. A. Hamid. (2008). Die Attach Film Performance In 3d Gfn Stacked Die. - Wseas Transaction On Applied And Theoretical Menchanics. 3(3):104-113.

Karen Wong Mee Chu, Abdul Razak Daud & Azman Jalar. (2008). Pengaruh Unsur Zirkonium Terhadap Sifat Mekanik Aloi Tempaan Al-1.2si-0.5mg-0.25fe. - Sains Malaysiana. 37(2):189-193.

M.k. Md Arshad, A. Jalar, I. Ahmad And G. Omar. (2007). The Characterization Of Al Bond Pad Surface Treatment In Electroless Nickel Immersion Gold (enig) Deposition. - American Journal Of Applied Sciences. 4(3):133-141.

Prosiding Terindeks

Sabarina Abdul Hamid, Muhammad Nubli Zulkifli, Azman Jalar, Maria Abu Bakar, Wan Nursheila Wan Jusoh, Hassan Basher, Michael Daenen. (2023). Effect Of Ultrasonic Process Parameter On Resistance And Plastic Deformation Of The Aluminum Ribbon Bond On Molybdenum Layer. - 8th Ieee Region 10 Conference, Tencon 2023. 1288-1292.

Zhiyong Li, Azman Jalar. (2023). Study On Forming And Properties Of Heat Resistant Low Expansion High Silicon Aluminum Alloy Based On Genetic Algorithm. - 2023 International Conference On Mechatronics, Iot And Industrial Informatics (icmiii). 292-296.

Fateh Amera Mohd Yusoff, Maria Abu Bakar, Azman Jalar. (2023). Effect Of Thermomechanical Treatment On Microstructural And Localized Micromechanical Properties Of Sn0.7cu Solder Alloy. - Green Materials And Electronic Packaging Interconnect Technology Symposium (epits 2022). 133-144.

Adlil Aizat Ismail, Maria Abu Bakar, Abang Annuar Ehsan, Azman Jalar, Zol Effendi Zolkefli, Erwan Basiron. (2023). Thermal Management On The Solder Joints Of Adjacent Ball Grid Array (bga) Rework Components Using Laser Soldering. - Green Materials And Electronic Packaging Interconnect Technology Symposium (epits 2022). 103-113.

Adlil Aizat Ismail, Maria Abu Bakar, Abang Annuar Ehsan, Azman Jalar, Erwan Basiron, Fakhrozi Che Ani. (2022). Intermetallic Compound Thickness Of Ball Grid Array Solder Joints Under Thermal Cycling Test Using Anova. - 2022 Ieee 39th International Electronics Manufacturing Technology Conference (iemt). 1-4.

M. S. Mohamed Sunar, M. Abu Bakar, A. Jalar, F. Che Ani, M . R. Ramli. (2022). Effect Of Stencil Wall Aperture On Solder Paste Release Via Stencil Printing. - International Conference On Electronic And Advanced Materials (iceam 2021) - Journal Of Physics: Conference Series. 1-6.

Nik Ahmad Nizam Nik Zainuddin, Nur Yashidar Mohamad Yasin, Nur Syazreen Ardnan, Chee Keat Gan, Mohd Fakrul Naim Muhammad Zin, Azman Jalar. (2022). Voltage Bias Enhancement For Leakage Test On Discrete Products To Detect Low Contact. - 39th International Electronics Manufacturing Technology Conference (iemt). 1-5.

P. Vijayakumaran, M. H. M. Ramli, M. Selvam, K. Hamid, A. Atiqah, A. Jalar, M. A. Bakar. (2022). Reduce Wafer Remnants Through Pre-assembly Process Optimization. - International Conference On Electronic And Advanced Materials (iceam 2021). 1-5.

M. F. Suhaimi, M. Abu Bakar, A. Jalar, F. Che Ani, M. R. Ramli. (2022). Thermal Cycling Effect On The Crack Formation Of Solder Joint In Ball Grid Array Package. - International Conference On Electronic And Advanced Materials (iceam 2021) Journal Of Physics: Conference Series. 1-5.

Fateh Ameera Mohd Yusoff, Maria Abu Bakar, Azman Jalar. (2022). Effect Of 60% Thickness Reduction Of Sn-cu Solder Alloy On Localized Micromechanical Properties Via Nanoindentation Approach. - International Conference On Electronic And Advanced Materials (iceam 2021). 1-5.

A. Atiqah, R.a.a.a. Rahim, A. Jalar, K. S. Siow. (2022). Influence Of Copper Substrate Roughness On The Growth Of Intermetallic Compounds Layer In Sac305 Solder Joints. - International Conference On Electronic And Advanced Materials (iceam 2021). 1-6.

Khirullah Abdul Hamid, Aiman Hakim Badarisman, Azman Jalar, Maria Abu Bakar. (2022). Investigation Of Integrated Factors In The Occurrence Of Copper Wire Bonding Corrosion Of Semiconductor Packages. - International Conference On Electronic And Advanced Materials 2021 (iceam 2021). 1-5.

Aiman Hakim Badarisman, Khirullah Abdul Hamid, Hamizan Ideris, Maria Abu Bakar, Azman Jalar. (2022). Effects Of Molding Temperature On Delamination Of Small Outline Transistor (sot). - International Conference On Electronic And Advanced Materials (iceam 2021). 1-7.

Adlil Aizat Ismail, Maria Abu Bakar, Abang Annuar Ehsan, Azman Jalar, Fakhrozi Che Ani, Zol Effendi Zolkefli. (2022). Effects Of Underfill Materials On Behavior Of Intermetallic Compound Thickness Of Ball Grid Array Solder Joints Using Anova. - 2022 Ieee 39th International Electronics Manufacturing Technology Conference (iemt). 1-5.

Khirullah Abdul Hamid, Aiman Hakim Badarisman, Azman Jalar, Maria Abu Bakar. (2022). Effects Of Electrolyte Towards Copper Wire Metallurgical Interconnection In Semiconductor. - International Conference On Electronic And Advanced Materials (iceam 2021). 1-6.

Syed Mohamad Mardzukey Syed Mohamed Zain, Fakhrozi Che Ani, Mohamad Riduwan Ramli, Azman Jalar, Maria Abu Bakar. (2021). Effect Of Moisture Content On Crack Formation During Reflow Soldering Of Ball Grid Array (bga) Component. - The International Conference On Innovative Technology, Engineering And Sciences 2020 (icites 2020). 309-314.

Noor Fadhilah Rahmat, Wan Yusmawati Wan Yusoff, Azman Jalar, Azuraida Amat, Irman Abdul Rahman, Najib Saedi Ibrahim. (2021). Effect Of Gamma Radiation On Micromechanical Behaviour Of Sac305 Solder. - 7th International Conference On Solid State Science And Technology (icssst 2019). 535-540.

Joon Shyan Tan, Wai Wai Lee, A. Atiqah, Khirullah Abdul Hamid, Azman Jalar, Maria Abu Bakar. (2021). The Effect Of Electrolytic Deflash Current On Delamination Of Epoxy Mold Compound During Tin Plating Process. - 2021 Ieee Regional Symposium On Micro And Noelectronics (rsm). 73-75.

Azman Jalar, Syed Mohamad Mardzukey Syed Mohamed Zain, Fakhrozi Che Ani, Mohamad Riduwan Ramli, Maria Abu Bakar. (2021). Effect Of Potting Encapsulation On Crack Formation And Propagation In Electronic Package. - The International Conference On Innovative Technology, Engineering And Sciences 2020 (icites 2020). 351-357.

Khirullah Abdul Hamid, Maria Abu Bakar, Azman Jalar, Aiman Hakim Badarisman. (2021). Incorporation Of Big Data In Methodology Of Identifying Corrosion Factors In The Semiconductor Package. - 2021 International Conference On Electrical, Communication, And Computer Engineering (icecce). 1-4.

Nadia Nor Ahmad Taufiq, Khirullah Abdul Hamid, Aiman Hakim Badarisman, Hamizan Ideris, Azman Jalar, Maria Abu Bakar. (2021). Elucidation Of Metal Etching Defects Through The Experimental Design Process Characterization At Encapsulation And Electro-deflashing Processes. - 2021 Ieee Regional Symposium On Micro And Nanoelectronics (rsm). 69-72.

Nur Shafiqa Safee, Wan Yusmawati Wan Yusoff, Ariffin Ismail, Norliza Ismail, Maria Abu Bakar, Azman Jalar. (2020). Effect Of Blast Wave On Intermetallics Formation, Hardness And Reduced Modulus Properties Of Solder Joints. - 30th Regional Conference Of Solid State Science And Technology (solid State Phenomena). 31-36.

Maria Abu Bakar, Azman Jalar, Norliza Ismail1, Ahmad Ghadafi Ismail, Najib Saedi Ibrahim. (2020). Solderability Of Coloured Lead Free Solder Composite. - 30th Regional Conference Of Solid State Science And Technology (solid State Phenomena). 15-19.

Azman Jalar, Maria Abu Bakar, Mohd. Zulhakimi Ab. Razak, Norliza Ismail. (2020). Morphological Effect On The Intermetallic Compound Layer Growth Kinetics Of Metallurgical Joining. - 30th Regional Conference Of Solid State Science And Technology (solid State Phenomena). 26-30.

Norliza Ismail, Maria Abu Bakar, Azman Jalar, Muhammad Amer Hariths Jasmin. (2019). Mechanical Properties Of Sn Based Lead Free Solder Under Different Temperature. - Iop Conference Series: Materials Science And Engineering. 1-5.

H. Mamat, A. Tuhaime, Azman Jalar @ Jalil. (2019). The Study On Effect Of Colour Electrolyte Reference Electrode. - 2018 Ieee Conference On Open Systems (icos). 60-64.

Hazian Mamat, A Tuhaime, Azman Jalar. (2018). The Study On Effect Of Colour Electrolyte Reference Electrode. - Ieee Conference On Open Systems, Icos 2018. .

C. Sarveswaran, Emee Marina Salleh, A. Jalar, Z. Samsudin, M. Yusuf Tura Ali, F. Che Ani And N. K. Othman. (2017). Investigation Of Corrosion On Sac 305, Sac 0307 And Sac 0307-0.03 P-0.005 Ni Solder Paste Alloys In Simulated Body Fluid (sbf). - American Institute Of Physics (aip) Conference Proceedings. .

Ismail R., Harun F., Jalar A., Abdullah S.. (2016). Mechanical Interlocking On Leadframe Surface For Bondability Of Au Wedge Bond. - Materials Science Forum. 79-82.

Muhammad Nubli Zulkifli, Azman Jalar, Shahrum Abdullah & Nurinsan Kamil Othman. (2016). Bondability And Strength Evaluation Of Gold Ball Bond Using Nanoindentation Approach. - Key Engineering Materials. 132-141.

Wan Yusmawati Wan Yusmawati, Azman Jalar, Norinsan Kamil Othman & Irman Abdul Rahman. (2016). Nanoindentation Study On Heat Treated Gold Wire Bonding. - Materials Science Forum. 31-35.

Norinsan Kamil Othman, Koh Yunn Teng, Azman Jalar, Fakhrozi Che Ani And Zamri Samsudin. (2016). Electrochemical Migration Behaviours Of Low Silver Content Solder Alloy Sac 0307 On Printed Circuit Boards (pcbs) In Nacl Solution. - Materials Science Forum. 3-12.

L.y. Ang, N.k. Othman, A. Jalar, I. Ismail. (2016). The Effect Of Magnetic Field On Corrosion Inhibitor Of Copper In 0.5 M Hcl Solution. - Procedia Chemistry. 222-227.

Bakar M.a., Jalar A., Ismail R., Daud A.r.. (2016). Nanoindentation Of Sn3.0ag0.5cu/enig Solder Joint After High Temperature Storage. - Materials Science Forum. 40-43.

Said, F.a., Menon, P.s. , Nawi, M.n., Md Zain, A.r., Jalar, A., Majlis, B.y.. (2016). Copper-graphene Spr-based Biosensor For Urea Detection. - 12th Ieee International Conference On Semiconductor Electronics, Icse 2016. 264-267.

Ismail N., Ismail R., Nik Ubaidillah N.k.a., Jalar A., Zain N.m.. (2016). Surface Roughness And Wettability Of Sac/cnt Lead Free Solder. - Materials Science Forum. 73-75.

Ismail R., Harun F., Jalar A., Abdullah S.. (2016). Ultrasonic Vibration In Leadframe For The Bondability For Au Wedge Bond. - Materials Science Forum. 83-86.

Ismail N., Ismail R., Abd Aziz N.i., Jalar A.. (2016). Wettability Of Cnt-doped Solder Under Isothermal Aging. - Materials Science Forum. 76-78.

Bakar M.a., Jalar A., Ismail R., Daud A.r.. (2016). Directional Growth Behaviour Of Intermetallic Compound Of Sn3.0ag0.5cu/imsn Subjected To Thermal Cycling. - Materials Science Forum. 36-39.

Tarumaraja, K.a., Menon, P.s. , Said, F.a. , Jamil, N.a., Ehsan, A.a., Shaari, S., Majlis, B.y., Jalar, A.. (2016). Fdtd Numerical Analysis Of Spr Sensing Using Graphene-based Photonic Crystal. - 2th Ieee International Conference On Semiconductor Electronics, Icse 2016. 79-81.

St Chua, Ks Siow, A. Jalar. (2015). Effect Of Sintering Atmosphere On The Shear Properties Of Pressureless Sintered Silver Joint. - 36th Ieee International Electronics Manufacturing Technology Conference. 1-6.

Chua St, Siow Ks, Jalar A. (2014). Effect Of Sintering Atmosphere On The Shear Properties Of Pressureless Sintered Silver Joint. - 36th International Electronics Manufacturing Technology Conference,. .

Foo S.p., Siow K.s., A. Jalar. (2014). Synthesizing Snagcu Nanoparticles By Electrodeposition Of Reverse Microemulsion Electrolyte. - 2014 Ieee International Conference On Semiconductor Electronics (icse 2014). 513-516.

Azman Jalar , Wan Yusmawati Wan Yusoff, Norinsan Kamil Othman, Irman Abdul Rahman. (2014). Effects Of Thermal Cycling On The Mechanical Properties Of Gold Wire Bonding. - International Conference On Semiconductor Electronics, Icse 2014. .

Farhad Larki, Arash Dehzangi, Sawal Hamid Md Ali, Azman Jalar, Md. Shabiul Islam, Burhanuddin Y. Majlis, Mohd Nizar Hamidon.. (2014). Dependency Of Electrical Characteristics On Nano Gap Variation In Pinch Off Lateral Gate Transistors. - 2014 Ieee International Conference On Semiconductor Electronics (icse 2014). 170-173.

L. Y. Ang, N. K. Othman, A. Jalar, And I. Ismail. (2014). The Effect Of Magnetic Field On Copper In Various Corrosive Medium. - Aip Conference Proceedings - The 2014 Ukm Fst Postgraduate Colloquium. 26-29.

Mz Muzakkar, S Ahmad, Ma Yarmo, A Jalar, M Bijarimi. (2013). Shear Strength Of Single Lap Joint Aluminium-thermoplastic Natural Rubber (al-tpnr) Laminated Composite. - Journal Of Physics: Conference Series. 1-6.

Arash Dehzangi,farhad Larki, Burhanuddin Y. Majlis, M.n. Hamidon,p. Susthitha Menon, Azman Jalar, Md. Shabiul Isla. (2013). Numerical Investigation Of Channel Width Variation In Junctionless Transistors Performance. - 2013 Ieee Regional Symposium On Micro And Nano Electronics, Rsm 2013; Langkawi; Malaysia. 101-104.

Nurul Atikah Shariff, Norinsan Kamil Othman And Azman Jalar. (2013). Oxidation Behaviour Of Ferritic Stainless Steel Grade Crofer 22 Apu At 700 �c In Flowing Ar-75%co2-12%h2o. - Aip Conference Proceedings -ukm Fst Postgraduate Colloquium. .

Hamisah Ismail, Roslinda Shamsudin, Muhammad Azmi Abdul Hamid Dan Azman Jalar. (2013). Synthesis And Characterisation Of Nano Wollastonite From Rice Husk Ash And Limestone.. - Materials Science Forum, Transtech Publication Switzerland. .

Rabiahtul Zulkafli, Norinsan Kamil Othman, And Azman Jalar. (2013). Influence Of Temperature On Corrosion Inhibition For Carbon Steel By Rice Straw Extract In Hcl Solution: Synergistic Effect Of Cationic Surfactant. - Aip Conference Proceedings -ukm Fst Postgraduate Colloquium. .

M. Y. Zulkafli, N. K. Othman, A. M. Lazim And A. Jalar. (2013). Inhibitive Effects Of Palm Kernel Oil On Carbon Steel Corrosion By Alkaline Solution. - Aip Conference Proceedings -ukm Fst Postgraduate Colloquium. .

N. Mohamad, N. K. Othman, And A. Jalar. (2013). Investigation Of Sio2 :na2o Ratio As A Corrosion Inhibitor For Metal Alloys. - Aip Conference Proceedings -ukm Fst Postgraduate Colloquium. .

S. Yahya, N. K. Othman, A. R. Daud, And A. Jalar. (2013). The Inhibition Of Carbon Steel Corrosion By Lignin In Hcl And H2 So4. - Aip Conference Proceedings-ukm Fst Postgraduate Colloquium. .

Denni Asra Awizar, Norinsan Kamil Othman, Abdul Razak Daud, Azman Jalar And Rabiahtul Zulkafli. (2013). The Performance Of Nanosilicate From Rice Husk Ash As Green Corrosion Inhibitor For Carbon Steel In 0.5m Hcl. - Materials Science Forum / Trans Tech Publications, Switzerland. .

Wan Yusmawati Wan Yusoff, Azman Jalar, Norinsan Kamil Othman Dan Irman Abdul Rahman. (2013). Gamma-irradiation Effect On Material Properties Behaviour Of Semiconductor Package. - 2012 National Physics Conference, Perfik 2012; Bukit Tinggi, Pahang; Malaysia-(aip Conference Proceedings). 300-305.

Nurul Atikah Shariff, Norinsan Kamil Othman, Azman Jalar, Muhammad Azmi Abdul Hamid Dan Irman Abdul Rahman. (2013). High Temperature Corrosion Of Welded Ferritic Stainless Steel In Flowing Co2 Gas. - 2012 National Physics Conference, Perfik 2012; Bukit Tinggi, Pahang; Malaysia Aip Conference Proceedings - 2012 National Physics Conference. 351-355.

Kar Keng Lim, Muhammad Azmi Abdul Hamid, Roslinda Shamsudin, Azman Jalar Dan N.h. Al Hardan. (2013). Synthesis And Characterization Of Grape-like Sno2 Structures Grown By A Thermal Evaporation Method. - Materials Science Forum, Trans Tech Publications, Switzerland. .

Muhammd Nubli Zulkifli, Azman Jalar, Shahrum Abdullah, Roslinda Shamsudin And Rozli Zulkifli. (2012). Hardness Variation Of Ball Bond Wire Bonding. - Advanced Materials Research. .

Ahmad Mulia Hafizayatullah Amiruddina, Roslinda Shamsudin, Azman Jalar And Muhammad Azmi Abdul Hamidd. (2012). Single Layer Brushite Coating Onto Stainless Steel Substrate Using Dipcoating Technique.. - Advanced Materials Research. .

Siti Nuurul Fatimah Hasim, Muhammad Azmi Abdul Hamid, Roslinda Shamsudin, Shahidan Radiman & Azman Jalar. (2012). Surface Morphology Of Metal Oxide Sno2 Under Different Concentrations Of Oxygen By Thermal Evaporation Method. - 26th Regional Conference On Solid State Science And Technology, Rcssst 2011;seremban, Negeri Sembilan (advanced Materials Research). .

S. Nurul Atikah, N.k. Othman And A. Jalar. (2012). High Temperature Corrosion Of Fe-30cr In Flowing Co2 Gas. - 26th Regional Conference On Solid State Science And Technolog,seremban(yadvanced Materials Research). .

Azman Jalar, Wan Yusmawati Wan Yusoff, Norinsan Kamil Othman, Shahrum Abdullah And Irman Abdul Rahman. (2012). Gamma Irradiation Effect On Load-deflection Curve Of Semiconductor Package. - Advanced Materials Research. .

A. Jalar, Z.kornain, R.rasid, S.abdullah, N.k. Othman. (2011). The Effect Of Underfill Fillet Geometry To Die Edge Stress For Flip Chip Packaging. - International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen; 6 November 2010 Through 8 November 2010 (advanced Materials Research). .

Maria Abu Bakar, Muhammad Azmi Abdul Hamid, Azman Jalar And Roslinda Shamsudin. (2011). Synthesis Of Porous Mgo Into Sheet-like Structure Via Solution Routes. - 2011 International Conference On Frontier Of Nanoscience And Technology, Icfnst 2011; Kunming. .

Zainudin Kornain, Azman Jalar, Rozaidi Rasid And Shahrum Abdullah. (2011). The Study Of Underfill Epoxy Hardness In Reducing Curing Process Time For Flip Chip Packaging. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur (key Engineering Materials). .

Fayyadh Nakhaie Ahmad Refngah, Shahrum Abdullah, Azman Jalar, L.b. Chua. (2011). Microstructural Behaviour Study And Fea-based Fatigue Simulation On Parabolic Leaf Spring. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur(key Engineering Materials). .

Aendraa Azhar Abdul Aziz, Muhammad Faizol Ahmad Ibrahim, Azman Jalar, Junaidi Syarif, Shahrum Abdullah, Nasrizal Mohd Rashdi, Zainudin Kornain. (2011). Effect Of Different Fillers On Microstructure And Tensile Properties Of Welded Aa6061-t6. - Key Engineering Materials. .

F. Harun, Azman Jalar, Shahrum Abdullah, Mohd Faridz Mod Yunoh. (2011). Effect Of Hook Location For Ultra Fine Pitch Wirebonding Pull Testing Method. - Source: Fracture And Strength Of Solids Vii, Pts 1 And 2 Book Series: Key Engineering Materials. .

M.f. M. Yunoh, S. Abdullah, A. Jalar, L. Abdullah And M.f. Abdullah. (2011). Durability Assessment Of Quad Flat No-lead Package Using Signal Analysis. - Source: Fracture And Strength Of Solids Vii, Pts 1 And 2 Book Series: Key Engineering Materials. .

M. Z. Abdul Wahab, H. Mamat, A. Jalar. (2011). Temperature Coefficient Of Resistance (tcr) Measurement Method To Evaluate Metal Process Of Cmos Technology. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

I. Abdullah, A. Jalar, S. Abdullah, M. F. Rosle And M.f. Mod Yunoh. (2011). Stress Distribution Effect On A Stacked-die Qfn Package Manufacturing Processes. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010 (key Engineering Materials); Kuala Lumpur. .

H. Budiman, M. Z. Omar, A. Jalar And J. Syarif. (2011). Investigation On Cooling Slope And Conventional Stir Cast A356/al2o3 Metal Matrix Composites. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

Hazian Mamat, Nur Firdaus A Rahim, Mohd Zahrin A Wahab, Prof Dr. Azman Jalar. (2011). Research On Effect Of High Energy Implant To Resist Thickness. - Advanced Materials Research - Icfmm2011 Chongqing, China. .

N. E. Salehudin, A. Jalar And A. R. Daud. (2011). Quantitative Stereology For Roughness Morphology Of Aluminum Alloy. - Advanced Materials Research - International Conference On Advances In Materials And Processing Technologies, Ampt 2009. .

M. F. Ahmad Ibrahim, S.r.s.bakar, A. Jalar, N. K. Othman,
j. Sharif, A. R. Daud And N. M. Rashdi. (2011). Effect Of Porosity On Tensile Behaviour Of Welded Aa6061-t6 Aluminium Alloy. - 2011 International Conference On Mechanical Materials And Manufacturing Engineering, Icmmme 2011 (applied Mechanics And Materials); Nanchang. .

C. L. Nur Azida, A. Jalar, N. K. Othman, N. M. Rashdi, Md. Z. Ibel. (2011). Effect Of Different Filler Metals Towards Welding Of Aa6061 Al Alloy By X-ray Ct-scan. - Source: Advances In Superalloys, Pts 1 And 2 Book Series: Advanced Materials Research. .

Che Lah Nur Azida, Azman Jalar, Norinsan Kamil Othman, Abdul Razak Daud. (2011). Oxidation Effect Of Welded Aa6061 Al Alloy Using Er5356 Filler Metal. - 2011 International Conference On Mechanical Materials And Manufacturing Engineering, Icmmme 2011 (applied Mechanics And Materials); Nanchang. .

N. K. Othman, S. R. S. Bakar, A. Jalar, J. Syarif And M. Y. Ahmad. (2011). The Effect Of Filler Metals On Mechanical Properties Of 6 Mm Aa 6061-t6 Welded Joints. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

Aziz, A.a.a., Ibrahim, M.f.a., Jalar, A., Junaidi, S., Abdullah, S., Rashdi, N., Kornain, Z.. (2011). Effects Of Different Fillers On Microstructure And Tensile Properties Of Welded Aa6061-t6. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010 (key Engineering Materials); Kuala Lumpur. .

N. K. Othman, N. Othman And A. Jalar. (2011). Corrosion Behavior Of Fe-cr Alloys In Ar-10%o2 Atmosphere. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur(key Engineering Materials). .

N. A. Che Lah, M. F. Ahmad Ibrahim, A. Jalar, J. Sharif, N. K. Othman And N. M. Rashdi. (2011). The Effect Of Filler Er4043 And Er5356 On Porosity Distribution Of Welded Aa6061 Aluminium Alloy. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

Kornain, Z., Jalar, A., Rasid, R., Foong, C.s., Wong, T.l.. (2011). Estimation Of Curing Profile`s Parameters For Flip Chip Packaging Using Dsc And Tga. - 2011 International Conference On Materials, Mechatronics And Automation, Icmma 2011 (key Engineering Materials); Melbourne, Vic. .

N. Saud And A. Jalar. (2011). Sn-rich Phase Coarsening In Sn-ag-cu Solder Joint During Moderate Current Stressing. - Advanced Materials Research (international Conference On Advances In Materials And Processing Technologies, Ampt 2009). .

Jalar A., Zulkifli M.n., Othman N.k., Abdullah S.. (2011). The Re-evaluation Of Mechanical Properties Of Wire Bonding. - 2011 International Symposium On Advanced Packaging Materials, Apm 2011;xiamen. .

S. Abdullah, M.f.m. Yunoh, A. Jalar And M.f. Abdullah. (2011). Hardness Test On An Epoxy Mold Compounds Of A Quad Flat No Lead Package Using The Depth Sensing Nanoindentation. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

S. Abdullah, M. N. Zulkifli, And A. Jalar. (2011). Nanoindentation Approach For Evaluation Of Process Parameters Effect On The Strength Of Bonded Au Ball Bonds. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

A. Jalar, M. N. Zulkifli And S. Abdullah. (2011). Nanoindentation Test For The Strength Distribution Analysis Of Bonded Au Ball Bonds. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

N. K. Othman, M. N. Zulkifli, A. Jalar, And S. Abdullah. (2011). Nanoindentation Test For The Stiffness Distribution Analysis Of Bonded Au Ball Bonds. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

Mohd Zahrin A. Wahab, Azman Jalar, Shahrum Abdullah, Hazian Mamat. (2010). Characterization Of 0.5�m Bicmos Gate Oxide Using Time Dependent Dielectric Breakdown Test. - Advanced Materials Research. .

M. A. Bakara, M. A. A. Hamid & A. Jalar. (2010). Growth Behaviour Of Zno On Si (100) And Platinum Coated Glass Substrate From Aqueous Solution. - Advanced Materials Research. .

Shahrum Abdullah, Mohd Faridz Mod Yunoh And Azman Jalar. (2010). Three-point Bending Test Behaviour Of A Qfn Semiconductor Package. - Advanced Materials Research. .

N. K Othman, A. Jalar, N. Othman And D. J. Young. (2010). Effects Of Lanthanum On Fe-25cr Alloys Under Cyclic Oxidation. - Advanced Materials Research. .

Bakar M.a., Hamid M.a.a., Jalar A.. (2010). Growth Behaviour Of Zno On Si (100) And Platinum Coated Glass Substrate From Aqueous Solution. - Advanced Materials Research. .

Zainudin Kornain, Azman Jalar, Rozaidi Rasid And Shahrum Abdullah. (2010). An Optimization Of Two-steps Curing Profile To Eliminate Voids Formation In Underfill Epoxy For Hi-cte Flip Chip Packaging. - Advanced Materials Research. .

Eu Poh Leng, Ming Ding, Wayne Lindsay, Sheila Chopin, Ibrahim Ahmad, Azman Jalar. (2007). Pb-free Bga Solder Joint Reability Improvement With Sn3.5ag Solder Alloy On Ni/au Finish. - The Effect Of Nickel Thickness On Mechanical Strenght Of Pb-free Bga Spheres On Selectively Plated Ni/au Finish. .

Buku Penyelidikan

Maria Abu Bakar, Azman Jalar, Fakhrozi Che Ani. (2023). Pematerian Gelombang Pin Menerusi Lubang. - . 191.

A Atiqah, A. Jalar, M.a. Bakar, N. Ismail. (2022). Recent Progress In Lead-free Solder Technology. - . 332.

M.a. Bakar, A. Jalar, A. Atiqah, N. Ismail. (2022). Recent Progress In Lead-free Solder Technology. - . 332.

F.c. Ani, A.a. Saad, A. Jalar, C.y. Khor, M.a. Abas, Z. Bachok. (2022). Recent Progress In Lead-free Solder Technology. - . 332.

A Atiqah, Fa Sabaruddin, N Ismail, A Jalar, Ma Bakar, Aa Hamzah, Ra Ilyas, M Asrofi. (2022). Industrial Applications Of Nanocellulose And Its Nanocomposites. - . 22.

N. Ismail, A. Jalar, M.a. Bakar, A. Atiqah. (2022). Recent Progress In Lead-free Solder Technology. - . 21.

Norliza Ismail, Azman Jalar, Maria Abu Bakar. (2021). Pematerian Bahan Pateri Bebas Plumbum Berpengisi Karbon Nanotiub. - . 121.

Maria Abu Bakar, Azman Jalar. (2018). Teknologi Semikonduktor Dan Nanoelektronik : Perkembangan Dan Kegunaan. - . 32.

Roslina Ismail, Maria Abu Bakar, Azman Jalar. (2018). Teknologi Semikonduktor Dan Nanoelektronik: Perkembangan Dan Kegunaan. - . 13.

Mj Ghazali, Mz Omar & A Jalar. (2009). Sains Dan Teknologi Alam Melayu. - . 384.

A. Jalar, H. Kamarudin, S. Abdullah And Mf Mod Yunoh. (2008). Computers And Simulation In Modern Science, Volume Ii. - . Vol II, 20-26.

Bab Dalam Buku

M.a. Bakar, A. Jalar, A. Atiqah, N. Ismail. (2022). Recent Progress In Lead-free Solder Technology. - . 332.

A. Atiqah, N. Ismail, K.k. Lim, A. Jalar, M.a. Bakar, M.a. Maleque, R.a. Ilyas, A.b.m. Supian. (2022). Recycling Of Plastics, Metals, And Their Composites. - . 15.