CURRICULUM VITAE PROF. DR. MOHD. ZAIDI BIN OMAR

Penerbitan Berimpak Tinggi

Ahmad Muhammad Aziz, Intan Fadhlina Mohamed, Zenji Horita, Mohd Zaidi Omar, Zainuddin Sajuri, Norinsan Kamil Othman, Junaidi Syarif, Mohamed Abdelgawad Gebril, Farhad Ostovan, Seungwon Lee, Kenji Matsuda, Manabu Yumoto, Yoichi Takizawa, Ammar Abdulkareem. (2024). Strengthening Of A5052 Aluminum Alloy By High-pressure Sliding Process. - Journal Of Materials Science. 5754-5770.

Afifah Md Ali, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Mohd Shukor Salleh, Hanizam Hashim, Nur Farah Bazilah Wakhi Anuar. (2024). Effect Of Heat Treatment On The Microstructures And Mechanical Properties Of Thixoformed Graphene-reinforced Aluminium Alloy Composite. - International Journal Of Metalcasting. 1695-1709.

Nur Farah Bazilah Wakhi Anuar, Mohd Zaidi Omar, Mohd Shukor Salleh, Wan Fathul Hakim W. Zamri, Afifah Md Ali. (2024). Effect Of Graphene Addition On Microstructure And Wear Behaviour Of The A356-based Composite Fabricated By Thixoforming Process. - Journal Of Materials Research And Technology. 4813-4831.

Khaled Salem Alhawari, Mohd Zaidi Omar, Saziana Samat, Ahmad Muhammad Aziz. (2024). Effect Of Magnesium Addition Consolidated By The Thixoforming Process On The Wear Properties Of A319 Alloy. - The International Journal Of Advanced Manufacturing Technology. 4327-4344.

M. A. M. Arif, M. Z. Omar, S. Samat, Z. Sajuri. (2023). Microstructural And Mechanical Properties Of Thixoformed Al-si-cu-mg Alloy: Effect Of Partial Remelting Treatment. - International Journal Of Metalcasting. 3155-3166.

Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman, Dawod Mohamed Elabar, Farag Ibrahim Haider, Saziana Samat And Osama M. Irfan. (2023). Effect Of Semisolid And Heat Treatment Process On Microstructural Refinement Of Al-7si Alloy. - Materials. 1-13.

Nur Farah Bazilah Wakhi Anuar, Mohd Shukor Salleh, Mohd Zaidi Omar, Wan Fathul Hakim W. Zamri, Afifah Md Ali, Saziana Samat. (2023). Wear Properties Of Graphene-reinforced Aluminium Metal Matrix Composite: A Review. - Reviews On Advanced Materials Science. 1-27.

Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman, Ahmad Muhammad Aziz, Osama M. Irfan. (2023). The Microstructural Refinement Of The A356 Alloy Using Semi-solid And Severe Plastic-deformation Processing. - Metals. 1-24.

Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman And Osama M. Irfan. (2022). Microstructure Refinement By A Combination Of Heat Treatment And Thixoforming Process Followed By Severe Plastic Deformation And Their Effects On Al-si Alloy Hardness. - Metals. 1-15.

Afifah Md Ali, Mohd Zaidi Omar, Mohd Shukor Salleh, Hanizam Hashim, Intan Fadhlina Mohamed, Nur Farah Bazilah Wakhi Anuar. (2022). Mechanical Behaviour And Morphology Of Thixoformed Aluminium Alloy Reinforced By Graphene. - Materials. 1-15.

M.a. Abdelgnei, M.z. Omar, M.j. Ghazali, M.n. Mohammed. (2022). Microstructure Evaluation And Mechanical Properties Of Thixoformed Al-5.7si-2cu-0.3mg Aluminum Alloys. - International Journal Of Metalcasting. 370-384.

Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman And Osama M. Irfan. (2022). Combining Heat Treatment And High-pressure Torsion To Enhance The Hardness And Corrosion Resistance Of A356 Alloy. - Metals. 1-12.

A.m. Aziz, M.z. Omar, Z. Sajuri. (2021). Strength Of Thixoformed A319 Alloy At Elevated Temperature. - Metals And Materials International. 2416-2429.

Saziana Samat, Mohd Zaidi Omar, Amir Hossein Baghdadi, Intan Fadhlina Mohamed, Ahmad Muhammad Aziz. (2021). Mechanical Properties And Microstructures Of A Modified Al-si-cu Alloy Prepared By Thixoforming Process For Automotive Connecting Rods. - Journal Of Materials Research And Technology. 1086-1102.

S. Samat, M.z. Omar, A.h. Baghdadi, I.f. Mohamed, A. Rajabi, A.m. Aziz. (2021). Microstructural Evolution, Dislocation Density And Tensile Properties Of Al-6.5si-2.1cu-0.35mg Alloy Produced By Different Casting Processes. - Journal Of Materials Science And Technology. 145-157.

R. Idris, S. Abdullah, P. Thamburaja & M. Z. Omar. (2021). Predicting Fatigue Crack Growth Rate Under Block Spectrum Loading Based On Temperature Evolution Using The Degradation-entropy Generation Theorem. - International Journal Of Fracture. 145-158.

Junaidi Syarif, Mohammad H. Yousuf, Zainuddin Sajuri, Amir Hossein Baghdadi, Mahdi Merabtene And Mohd Zaidi Omar. (2020). Effect Of Partial Solution Treatment Temperature On Microstructure And Tensile Properties Of 440c Martensitic Stainless Steel. - Metals. 1-14.

H. Hanizam, M.s. Salleh, M.z. Omar, A.b. Sulong, M.a.m. Arif. (2020). Effects Of Hybrid Processing On Microstructural And Mechanical Properties Of Thixoformed Aluminum Matrix Composite. - Journal Of Alloys And Compounds. 1-12.

M. A. M. Arif, M. Z. Omar, Z. Sajuri, M. S. Salleh. (2020). Effects Of Cu And Mg On Thixoformability And Mechanical Properties Of Aluminium Alloy 2014. - Transactions Of Nonferrous Metals Society Of China. 275-287.

Roslinda Idris, Shahrum Abdullah, Prakash Thamburaja And Mohd Zaidi Omar. (2020). Prediction Of Fatigue Crack Growth Rate Based On Entropy Generation. - Entropy. 1-22.

Zainuddin Sajuri, Nor Fazilah Mohamad Selamat, Amir Hossein Baghdadi, Armin Rajabi, Mohd Zaidi Omar, Amir Hossein Kokabi And Junaidi Syarif. (2020). Cold-rolling Strain Hardening Effect On The Microstructure, Serration-flow Behaviour And Dislocation Density Of Friction Stir Welded Aa5083. - Metals. 1-16.

Fadzilah Adnan, Zainuddin Sajuri, Amir Hossein Baghdadi, Mohd Zaidi Omar. (2020). Effects Of Rapid Heating And Uniaxial Loading On The Phase Transformation And Mechanical Properties Of Direct Partial Remelted Butt Joint Of Aisi D2 Tool Steel. - Materials Science & Engineering A. 1-12.

Amir Hossein Baghdadi, Zainuddin Sajuri, Mohd Zaidi Omar And Armin Rajabi. (2020). Friction Stir Welding Parameters: Impact Of Abnormal Grain Growth During Post Weld Heat Treatment On Mechanical Properties Of Al-mg-si Welded Joints. - Metals. 1-18.

M.a. Abdelgnei, M.z. Omar, M.j. Ghazali, M.n. Mohammed, B. Rashid. (2020). Dry Sliding Wear Behaviour Of Thixoformed Al-5.7si-2cu-0.3 Mg Alloys At High Temperatures Using Taguchi Method. - Wear. 1-12.

Y.s. Kong, S. Abdullah, D. Schramm, M.z. Omar, S.m. Haris. (2019). Development Of Multiple Linear Regression-based Models For Fatigue Life Evaluation Of Automotive Coil Springs. - Mechanical Systems And Signal Processing. 675-695.

Y.s. Kong, S. Abdullah, D. Schramm, M.z. Omar, S.m. Haris. (2019). Evaluation Of Energy-based Model Generated Strain Signals For Carbon Steel Spring Fatigue Life Assessment. - Metals. .

H. Hanizam, M.s. Salleh, M.z. Omar, A.b. Sulong. (2019). Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. - Journal Of Alloys And Compounds. 83-90.

Yat Sheng Kong, Shahrum Abdullah, Dieter Schramm, Mohd Zaidi Omar, Sallehuddin Mohd. Haris. (2019). Optimization Of Spring Fatigue Life Prediction Model For Vehicle Ride Using Hybrid Multi-layer Perceptron Artificial Neural Networks. - Mechanical Systems And Signal Processing. 597-621.

Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman. (2019). Microstructural Evaluation And Corrosion Resistance Of Semisolid Cast A356 Alloy Processed By Equal Channel Angular Pressing. - Metals. 1-15.

Amir Hossein Baghdadi, Armin Rajabi, Nor Fazilah Mohamad Selamat, Zainuddin Sajuri, Mohd Zaidi Omar. (2019). Effect Of Post-weld Heat Treatment On The Mechanical Behavior And Dislocation Density Of Friction Stir Welded Al6061. - Materials Science & Engineering A. 728-734.

Hashim Hanizam, Mohd Shukor Salleh, Mohd Zaidi Omar, Abu Bakar Sulong. (2019). Optimisation Of Mechanical Stir Casting Parameters For Fabrication Of Carbon Nanotubes-aluminium Alloy Composite Through Taguchi Method. - Journal Of Materials Research And Technology-jmr&t. 2223-2231.

Amir Hossein Baghdadi, Zainuddin Sajuri, Nor Fazilah Mohamad Selamat, Mohd Zaidi Omar, Yukio Miyashita, And Amir Hossein Kokabi. (2019). Effect Of Intermetallic Compounds On The Fracture Behavior Of Dissimilar Friction Stir Welding Joints Of Mg And Al Alloys. - International Journal Of Minerals, Metallurgy And Materials. 1285-1298.

Nora Osman, Zainuddin Sajuri, Amir Hossein Baghdadi And Mohd Zaidi Omar. (2019). Effect Of Process Parameters On Interfacial Bonding Properties Of Aluminium Copper Clad Sheet Processed By Multi-pass Friction Stir Welding Technique. - Metals. 1-19.

Hanizam Hashim, Mohd Shukor Salleh And Mohd Zaidi Omar. (2019). Homogenous Dispersion And Interfacial Bonding Of Carbon Nanotube Reinforced With Aluminum Matrix Composite: A Review. - Reviews On Advanced Materials Science. 295-303.

Najihah Abdul Rahman, Shahrum Abdullah, Mohamad Faizal Abdullah, Wan Fathul Hakim Zamri, Mohd Zaidi Omar And Zainuddin Sajuri. (2018). Experimental And Numerical Investigation On The Layering Configuration Effect To The Laminated Aluminium/steel Panel Subjected To High Speed Impact Test. - Metals. .

M. N. Mohammed, M. Z. Omar, Salah Al-zubaidi, K. S. Alhawari And M. A. Abdelgnei. (2018). Microstructure And Mechanical Properties Of Thixoweldedaisi D2 Tool Steel. - Metals. .

Yat Sheng Kong, Shahrum Abdullah, Dieter Schramm, Mohd Zaidi Omar, Sallehuddin Mohd. Haris. (2018). Vibration Fatigue Analysis Of Carbon Steel Coil Spring Under Various Road Excitations. - Metals. .

Mohd Najib Muhamed, Mohd Zaidi Omar, Shahrum Abdullah, Zainuddin Sajuri, Wan Fathul Hakim Wan Zamri And Mohd Faizal Abdullah. (2018). Brazed Joint Interface Bonding Strength Of Ar500 Steel And Aa7075 Aluminium Alloy. - Metals. .

Intan Fadhlina Mohamed, Takahiro Masuda, Seungwon Lee, Kaveh Edalati, Zenji Horita, Shoichi Hirosawa, Kenji Matsuda, Daisuke Terada, Mohd Zaidi Omar. (2017). Strengthening Of A2024 Alloy By High Pressure Torsion And Subsequent Aging. - Journal Of Materials Science And Engineering A. 112-118.

K.s. Alhawari, M.z. Omar, M.j. Ghazali, M.s. Salleh, M.n. Mohammed. (2017). Microstructural Evolution During Semisolid Processing Of Al-si-cu Alloy With Different Mg Contents. - Transactions Of Nonferrous Metals Society Of China. 1483-1497.

Y.s. Kong, S. Abdullah, D. Schramm , M.z. Omar, S.m. Haris, T. Bruckmann. (2017). Mission Profiling Of Road Data Measurement For Coil Spring Fatigue Life. - Measurement. 99-110.

Y. S. Kong, S. Abdullah, M. Z. Omar & S. M. Haris. (2016). Failure Assessment Of A Leaf Spring Eye Design Under Various Load Cases. - Engineering Failure Analysis. 146-159.

M.s. Salleh, M.z. Omar, K.s. Alhawari, M.n. Mohammed, M.a. Mad Ali, E. Mohamad. (2016). Microstructural Evolution And Mechanical Properties Of Thixoformed A319 Alloys Containing Variable Amounts Of Magnesium. - Transactions Of Nonferrous Metals Society Of China. 2029-2042.

K.s. Alhawari, M.z. Omar, M.j. Ghazali, M.s. Salleh, M.n. Mohammed. (2015). Evaluation Of The Microstructure And Dry Sliding Wear Behaviour Of Thixoformed A319 Aluminium Alloy. - Materials And Design. 169-180.

M.s Salleh, M.z. Omar. (2015). Influence Of Cu Content On Microstructure And Mechanical Properties Of Thixoformed Al-si-cu-mg Alloys. - Transactions Of Nonferrous Metals Society Of China. 3523-3538.

M.s. Salleh, M.z. Omar, J. Syarif. (2015). The Effects Of Mg Addition On The Microstructure And Mechanical Properties Of Thixoformed Al-5%si-cu Alloys. - Journal Of Alloys And Compounds. 121-130.

Y.s. Kong, M.z. Omar, L.b. Chua, S. Abdullah. (2014). Fatigue Life Prediction Of Parabolic Leaf Spring Under Various Road Conditions. - Engineering Failure Analysis. 92-103.

Y. S. Kong, M. Z. Omar, L. B. Chua And S. Abdullah. (2014). Ride Quality Assessment Of Bus Suspension System Through Modal Frequency Response Approach. - Advances In Mechanical Engineering. 1-17.

M.s. Salleh, M.z. Omar, J. Syarif, K.s. Alhawari, M.n. Mohammed. (2014). Microstructure And Mechanical Properties Of Thixoformed A319 Aluminium Alloy. - Materials And Design. 64 (2014) 142-152.

J. Syarif, T.n. Rohmannudin, M.z. Omar, Z. Sajuri, S. Harjanto. (2013). Stability Of The Beta Phase In Ti-mo-cr Alloy Fabricated By Powder Metallurgy. - Journal Of Mining And Metallurgy,section B:metallurg. 49(3)B:285-292.

M.a.m. Arif, M.z. Omar, N. Muhamad, J. Syarif, P. Kapranos. (2013). Microstructural Evolution Of Solid-solution-treated Zne22al In The Semisolid State. - Journal Of Materials Science & Technology. 29(8):765-774.

M.z. Omar, H.v. Atkinson, And P. Kapranos. (2011). Thixotropy In Semisolid Steel Slurries Under Rapid Compression. - Metallurgical And Materials Transactions A. 42(A):2807-2819.

M. Z. Omar, A. Alfan, J. Syarif, H. V. Atkinson. (2011). Microstructural Investigations Of Xw-42 And M2 Tool Steels In Semi-solid Zones Via Direct Partial Remelting Route. - Journal Of Materials Science. 46(24):7696-7705.

Penerbitan WOS

Nur Farah Bazilah Wakhi Anuar, Mohd Zaidi Omar, Mohd Shukor Salleh, Wan Fathul Hakim W. Zamri, Afifah Md Ali. (2024). Effect Of Short Heat Treatments On The Microstructural Evolution And Hardness Of Thixoformed Graphene Reinforced Aluminium Composites. - Sains Malaysiana. 705-717.

Afifah Md Ali, Mohd Zaidi Omar, Hanizam Hashim, Mohd Shukor Salleh And Intan Fadhlina Mohamed. (2021). Recent Development In Graphene-reinforced Aluminium Matrix Composite: A Review. - Reviews On Advanced Materials Science. 801-817.

M.n. Mohammed, M.z. Omar, Z. Sajuri, And Salah Al-zubaidi. (2020). Characterization Of Metallurgical And Mechanical Properties Of Thixowelded Aisi D2 And Aisi 304 Steels. - Journal Of Materials Engineering And Performance. 739-749.

M.a.m Arif, M.z. Omar & Z. Sajuri. (2020). Kebolehbentukan-tikso Aloi 2014 Dengan Penambahan Si Dan Pengurangan Cu. - Sains Malaysiana. 179-188.

Saziana Samat, Mohd Zaidi Omar, Intan Fadhlina Mohamed. (2019). High-frequency Induction Heating Of Al-si-cu-mg Aluminium Alloy In Thixoforming. - Materials Research. 1-13.

Y.s.kong, S.abdullah, D.schramm, M.z.omar, S.m.haris. (2019). Correlation Of Uniaxial And Multiaxial Fatigue Models For Automobile Spring Life Assessment. - Experimental Techniques. 1-19.

Saziana Samat, Mohd Zaidi Omar And Intan Fadhlina Mohamed. (2019). Effect Of Feedstock Geometry On The Semisolid Processing Of Al-si-cu-mg Alloy. - Materials Research Express. 1-11.

M.a. Gebril, M.z. Omar, N.k. Othman & I.f. Mohamed. (2019). Microstructural Refinement And Corrosion Resistance Improvement Of Heat-treated A356 Alloy Processed By Equal Channel Angular Pressing. - Sains Malaysiana. 2749-2757.

Y. S. Kong, S. Abdullah, D. Schramm, M. Z. Omar, S. M. Haris. (2019). Design Of Artificial Neural Network Using Particle Swarm Optimisation For Automotive Spring Durability. - Journal Of Mechanical Science And Technology. 1-9.

Fadzilah Adnan, Zainuddin Sajuri, Mohd Zaidi Omar. (2019). Effect Of Uniaxial Load On Microstructure And Mechanical Properties Of Thixo-joint Aisi D2 Tool Steel. - Journal Of Mechanical Engineering And Sciences. 5006-5020.

Mohamed A. Gebril, M. Zaidi. Omar, Nk. Othman & I.f. Mohamed. (2019). Effect Of Equal Channel Angular Pressing Processing Routes On Corrosion Resistance And Hardness Of Heat Treated A356 Alloy. - Sains Malaysiana. 661-668.

Nora Osman, Zainuddin Sajuri And Mohd Zaidi Omar. (2018). Multi-pass Friction Stirred Clad Welding Of Dissimilar Joined Aa6061 Aluminium Alloy And Brass. - Journal Of Mechanical Engineering And Sciences. 4285-4299.

Mohd Anif Mohd Arif, Mohd Zaidi Omar & Zainuddin Sajuri. (2018). Pembentukan Mikrostruktur Berbentuk Sfera Dalam Keadaan Separa Pepejal Aloi Aluminium Al-4.8si-2.8cu-0.5mg. - Jurnal Kejuruteraan. .

Najihah Abdul Rahman, Shahrum Abdullah, Mohamad Faizal Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri, Wan Fathul Hakim Zamri. (2018). Ballistic Limit Of Laminated Panels With Different Joining Materials Subjected To Steel-hardened Core Projectile. - International Journal Of Integrated Engineering. .

R. Idris, S. Abdullah, P. Thamburaja, M. Z. Omar. (2018). Entropy-based Approach For Fatigue Crack Growth Rate Of Dual-phase Steel. - International Journal Of Integrated Engineering. .

Junaidi Syarif, Nofriady Handra, Zainuddin Sajuri, Mohd Zaidi Omar. (2018). Change In Tensile Properties Of Dual-phase Steels By Cu Addition. - Transactions Of The Indian Institute Of Metals. 513-519.

Roslinda Idris, Shahrum Abdullah, Prakash Thamburaja, Mohd Zaidi Omar. (2018). The Need To Generate Entropy Characteristics For Fatigue Life Prediction In Low-carbon Steel. - Journal Of The Brazilian Society Of Mechanical Sciences And Engineering. .

Khaled Salem Alhawari, Mohd Zaidi Omar, Mariyam Jameelah Ghazali, Mohd Shukor Salleh, Mohammed Naser Abdulrazaq. (2017). Effect Of Thixoforming On The Wear Properties Of Al-si-cu Aluminium Alloy. - Jurnal Teknologi. .

R Idris, S Abdullah, P Thamburaja And Mz Omar. (2017). Evaluation Of Fatigue Crack Growth Rate For Iron-carbon Metals Based On Degradation-entropy Generation Theorem. - Journal Of Fundamental And Applied Sciences. 526-541.

Ahmad Muhammad Aziz, Mohd Zaidi Omar, Zainuddin Sajuri And Mohd Shukor Salleh. (2016). Microstructural Morphology Of Rheocast A319 Aluminium Alloy. - Advances In Mechanical Engineering. 1-10.

A.m. Aziz, M.z. Omar And M.s. Salleh. (2016). Evolusi Mikrostruktur Aloi A333 Melalui Proses Logam Separa Pepejal. - Sains Malaysiana. 977-987.

K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh And M. N. Mohammed. (2016). Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic Al-si-cu Alloy With Different Amounts Of Magnesium. - Composite Interfaces. 519-531.

Abdullah M.f., Abdullah S., Omar M.z., Sajuri Z., Sohaimi R.m.. (2016). Fatigue Life Of The Magnesium Alloy Az31b Under Specific Spectrum Loading. - Materialpruefung/materials Testing. 200-205.

Aripin M.a., Sajuri Z., Abdullah S., Omar M.z., Zamri W.f.h., Jamil W.n.m., Abdullah M.f.. (2016). Microscale Groove Effect On Shear Strength Of Epoxy-bonded Dissimilar Metal Plate. - Journal Of Adhesion Science And Technology. 2001-2012.

W.n.m. Jamil, M.a. Aripin, Z. Sajuri, S. Abdullah, M.z. Omar, M.f. Abdullah And W.f.h. Zamri. (2016). Mechanical Properties And Microstructures Of Steel Panels For Laminated Composites In Armoured Vehicles. - International Journal Of Automotive And Mechanical Engineering. 3742-3753.

Mohamad Faizal Abdullah, Shahrum Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri And Risby Mohd Sohaimi. (2015). Failure Observation Of The Az31bmagnesium Alloy And The Effect Of Leadaddition Content Under Ballistic Impact. - Advances In Mechanical Engineering. 1-13.

M. N. Mohammed, M. Z. Omar, Z. Sajuri, M. S. Salleh And K. S. Alhawari. (2015). Trend And Development Of Semisolid Metal Joining Processing. - Advances In Materials Science And Engineering. 1-13.

M.j. Ghazali, M. Daud, A. Muhammad, M.z. Omar, C.h. Azhari. (2015). Microstructure Analyses Of Malay Keris And Its Relation To Mechanical Properties. - Acta Physica Polonica A. 1358-1362.

M.n. Mohammed, M.z. Omar, J. Syarif & M.s. Salleh. (2014). Morphological Evolution During Partial Re-melting Of Aisi D2 Cold-work Tool Steel. - Sains Malaysiana. 1213-1219.

M.s. Salleh, M.z. Omar, J. Syarif & M.n. Mohammed. (2014). Permodelan Termodinamik Aloi Al-si-cu Untuk Pemprosesan Logam Separa Pepejal. - Sains Malaysiana. 43(5): 791-798.

Junaidi Syarif, Agung Iswadi, Mariyam Jameelah Ghazali, Zainuddin Sajuri, Mohd Zaidi Omar. (2013). Wear Behavior Of Copper-containing Ferritic Iron Under A Dry Sliding Condition. - Journal Of Zhejiang University - Science A. 14(14):906-914.

Y. S. Kong, M. Z. Omar, L. B. Chua And S. Abdullah. (2013). Explicit Nonlinear Finite Element Geometric Analysis Of Parabolic Leaf Springs Under Various Loads. - Scientific World Journal. 2013:Article ID 261926.

M. N. Mohammed, M. Z. Omar, M. S. Salleh, And K. S. Alhawari. (2013). Study On Thixojoining Process Using Partial Remelting Method. - Advances In Materials Science And Engineering. 2013:Article ID 251472.

M. N. Mohammed, M. Z. Omar, J. Syarif, Z. Sajuri, M. S. Salleh, And K. S. Alhawari. (2013). Microstructural Evolution During Dprm Process Of Semisolid Ledeburitic D2 Tool Steel. - Scientific World Journal. 2013:Article ID 828926.

M. N. Mohammed, M. Z. Omar, M. S. Salleh, K. S. Alhawari, P. Kapranos. (2013). Semisolid Metal Processing Techniques For Nondendritic Feedstock Production. - Scientific World Journal. 2013:Article ID 752175.

Junaidi Syarif, Eko Kurniawan, Zainuddin Sajuri & Mohd Zaidi Omar. (2013). Influence Of Iron On Phase Stability And Corrosion Resistance Of Ti-15%cr Alloy. - Sains Malaysiana. 42(12):1775-178.

Penerbitan SCOPUS/ERA

H. Hanizam, M. S. Salleh, Z. Marjom, M. Z. Omar, A. B. Sulong, S. A. Sundi, H. Boejang, A. H. Abdul Rasib. (2023). Effect Of Heat Treatment Cycles On Tensile Performance And Microstructural Evolution Of Thixoformed Mwcnt-a356 Composite. - Journal Of Engineering Science And Technology. 1323-1338.

M. N.mohammed, M. Z. Omar, Adnan Naji Jameel Al-tamimi, Hakim S. Sultan, Luay Hashem Abbud, Salah Al-zubaidi, Oday I. Abdullah And M. Abdulrazaq. (2023). Microstructural And Mechanical Characterization Of Ledeburitic Aisi D2 Cold-work Tool Steel In Semisolid Zones Via Direct Partial Remelting Process. - Journal Of Manufacturing And Materials Processing. 1-18.

N.f.b.w. Anuar, M.s. Salleh, M.z. Omar, W.f.h.w. Zamri, S.h. Yahaya, A.m. Ali. (2023). Effect Of T6 Heat Treatment On Microstructure And Hardness Properties Of Thixoformed Graphene-reinforced A356 Composites. - Journal Of Advanced Manufacturing Technology. 73-85.

A. Md Ali, M.z. Omar, M.s. Salleh, I.f. Mohamed, N.f.b Wakhi Anuar. (2023). Investigation Of The Mechanical Properties And Microstructure Of Graphene-aluminium Alloy Composite Fabricated By Stir Casting Process. - Materials Science Forum. 3-8.

Nur Farah Bazilah Wakhi Anuar, Mohd Shukor Salleh, Mohd Zaidi Omar And Saifudin Hafiz Yahaya. (2022). Mechanical Properties And Dry Sliding Wear Behaviour Of Al-si-mg Alloy By Equal Channel Angular Pressing. - Aims Materials Science. 733-749.

A.m. Aziz, M.z. Omar, Z. Sajuri. (2021). Strength Of Thixoformed A319 Alloy At Elevated Temperature. - Metals And Materials International. 2416-2429.

M.a.m Arif, M.z. Omar & Z. Sajuri. (2020). Kebolehbentukan-tikso Aloi 2014 Dengan Penambahan Si Dan Pengurangan Cu. - Sains Malaysiana. 179-188.

Roslinda Idris, Shahrum Abdullah, Prakash Thamburaja And Mohd Zaidi Omar. (2020). Prediction Of Fatigue Crack Growth Rate Based On Entropy Generation. - Entropy. 1-22.

Saziana Samat, Mohd Zaidi Omar, Intan Fadhlina Mohamed. (2019). High-frequency Induction Heating Of Al-si-cu-mg Aluminium Alloy In Thixoforming. - Materials Research. 1-13.

Y.s.kong, S.abdullah, D.schramm, M.z.omar, S.m.haris. (2019). Correlation Of Uniaxial And Multiaxial Fatigue Models For Automobile Spring Life Assessment. - Experimental Techniques. 1-19.

Y.s. Kong, S. Abdullah, D. Schramm, M.z. Omar, S.m. Haris. (2019). Evaluation Of Energy-based Model Generated Strain Signals For Carbon Steel Spring Fatigue Life Assessment. - Metals. .

Saziana Samat, Mohd Zaidi Omar And Intan Fadhlina Mohamed. (2019). Effect Of Feedstock Geometry On The Semisolid Processing Of Al-si-cu-mg Alloy. - Materials Research Express. 1-11.

M. A. Abdelgnei, M. Z. Omar, M. J. Ghazali, Mohamed A. Gebril And M. N. Mohammed. (2018). Dry Sliding Wear Behaviour Of Rheocast Al-5.7si-2cu-0.3mg Alloy. - International Journal Of Engineering & Technology. .

R. Idris, S. Abdullah, P. Thamburaja, M. Z. Omar. (2018). Entropy-based Approach For Fatigue Crack Growth Rate Of Dual-phase Steel. - International Journal Of Integrated Engineering. .

M.f. Abdullah, S. Abdullah, M.z. Omar, Z. Sajuri & M.s. Risby. (2018). Observing The Behaviour Of Reinforced Magnesium Alloy With Carbon-nanotube And Lead Under 976 M/s Projectile Impact. - Journal Of Mechanical Engineering. .

M. N. Mohammed, M. Z. Omar, Salah Al-zubaidi, K. S. Alhawari And M. A. Abdelgnei. (2018). Microstructure And Mechanical Properties Of Thixoweldedaisi D2 Tool Steel. - Metals. .

M. N. Mohammed, M. Z. Omar, K. S. Alhawari, M. A. Abdelgnei And Salah Al-zubaidi. (2018). Welding Of Dissimilar Steels Via Thixowelding Processes. - International Journal Of Engineering & Technology. .

Y. S. Kong, S. Abdullah, D. Schramm, M. Z. Omar, S. M. Haris, T. Bruckmann And F. Kracht. (2018). Characterizing Spring Durability For Automotive Ride Using Artificial Neural Network Analysis. - International Journal Of Engineering & Technology. .

Mohd Najib Muhamed, Mohd Zaidi Omar, Shahrum Abdullah, Zainuddin Sajuri And Wan Fathul Hakim Wan Zamri. (2018). Investigation Of Low-velocity Impact And Flexural Loading On Ar500 Steel/aa7075 Aluminum Alloy Brazed Joint. - Songklanakarin Journal Of Science And Technology. .

Fadzilah Adnan, Zainuddin Sajuri And Zaidi Omar. (2018). A Study Of Microstructural Evolution Of Aisi D2 Tool Steel During Direct Partial Remelting Method. - International Journal Of Mechanical Engineering And Robotics Research. 689-693.

M. N. Muhamed, M. Z. Omar, S. Abdullah , Z. Sajuri, W. F. H. W. Zamri. (2017). The Effect Of Surface Texture On The Joint Shear Strength Of Ar500 Steel And Aa7075. - Journal Of Mechanical Engineering. .

N.a. Rahman, M.f. Abdullah, S. Abdullah, W.f.h. Zamri, M.z. Omar, Z. Sajuri. (2017). Characterising Ballistic Limits Of Lightweight Laminated-structure As A Protective Panel For Armoured Vehicle. - Journal Of Mechanical Engineering. 20-34.

Y.s. Kong, S. Abdullah, D. Schramm , M.z. Omar, S.m. Haris, T. Bruckmann. (2017). Mission Profiling Of Road Data Measurement For Coil Spring Fatigue Life. - Measurement. 99-110.

Y.s. Kong, S. Abdullah, M.z. Omar, S.m. Haris. (2017). The Need To Generate A Force Time History Towards Life Assessment Of A Coil Spring. - Journal Of Mechanical Engineering. 11-26.

W. N. M. Jamil, Z. Sajuri, S. Abdullah, M. A. Aripin, M. Z. Omar, M.f. Abdullah, W. F. H. Zamri. (2017). Effect Of Steel Fibres And Wire Mesh Reinforcement On Flexural Strength And Strain Energy Steel-epoxy-aluminium Composite Laminates. - Journal Of Mechanical Engineering. 10-20.

Y. S. Kong, S. Abdullah, M. Z. Omar & S. M. Haris. (2016). Failure Assessment Of A Leaf Spring Eye Design Under Various Load Cases. - Engineering Failure Analysis. 146-159.

Y. S. Kong, S. Abdullah, M. Z. Omar & S. M. Haris. (2016). Side Force Analysis Of Suspension Strut Under Various Load Cases. - Jurnal Teknologi. 85-90.

A.m. Aziz, M.z. Omar And M.s. Salleh. (2016). Evolusi Mikrostruktur Aloi A333 Melalui Proses Logam Separa Pepejal. - Sains Malaysiana. 977-987.

Samsudin M., Omar M.z., Abdullah S.. (2016). Effects Of Rheocasting And Thixoforming On The Microstructure And Mechanical Properties Of A356 Aluminium Alloy. - Jurnal Teknologi. 107-113.

Intan Fadhlina Mohamed, Seungwon Lee, Kaveh Edalati, Zenji Horita, Shahrum Abdullah, Mohd Zaidi Omar, Wan Fathul Hakim Wan Zamri. (2016). Grain Refinement And Microstructure Evolution In Aluminum A2618 Alloy By High Pressure Torsion. - Jurnal Teknologi. 149-152.

Ahmad Muhammad Aziz, Mohd Zaidi Omar, Zainuddin Sajuri And Mohd Shukor Salleh. (2016). Microstructural Morphology Of Rheocast A319 Aluminium Alloy. - Advances In Mechanical Engineering. 1-10.

Muhamed M.n., Omar M.z., Abdullah S., Sajuri Z., Zamri W.f.h., Rahman M.a.i.a., Abdullah M.f.. (2016). Investigation On Brazing Interface Bonding Characteristic Of Aa7075 And Aa6061 Aluminum Alloy With Ar500 Steel Using Al-si-zn Filler Metal. - Jurnal Teknologi. 129-135.

Kong Y.s., Abdullah S., Omar M.z., Haris S.m.. (2016). Topological And Topographical Optimization Of Automotive Spring Lower Seat. - Latin American Journal Of Solids And Structures. 1388-1405.

Rahman N.a., Abdullah S., Zamri W.f.h., Abdullah M.f., Omar M.z., Sajuri Z.. (2016). Ballistic Limit Of High-strength Steel And Al7075-t6 Multi-layered Plates Under 7.62-mm Armour Piercing Projectile Impact. - Latin American Journal Of Solids And Structures. 1658-1676.

Abdullah M.f., Abdullah S., Omar M.z., Sajuri Z., Sohaimi R.m.. (2016). Fatigue Life Of The Magnesium Alloy Az31b Under Specific Spectrum Loading. - Materialpruefung/materials Testing. 200-205.

Aziz A.m., Omar M.z., Sajuri Z., Salleh M.s.. (2016). Microstructural Changes Of Aluminium Alloy A319 On Cooling Slope Plate. - Jurnal Teknologi. 121-127.

Rahman M.a.i.a., Omar M.z., Abdullah S., Sajuri Z., Zamri W.f.h., Muhamed M.n., Abdullah M.f.. (2016). Effects Of Wetting Time On Properties Of Steel-aluminium Brazed Joint. - Jurnal Teknologi. 51-55.

M.j. Ghazali, M. Daud, A. Muhammad, M.z. Omar, C.h. Azhari. (2015). Microstructure Analyses Of Malay Keris And Its Relation To Mechanical Properties. - Acta Physica Polonica A. 1358-1362.

M. N. Mohammed, M. Z. Omar, Z. Sajuri, M. S. Salleh And K. S. Alhawari. (2015). Trend And Development Of Semisolid Metal Joining Processing. - Advances In Materials Science And Engineering. 1-13.

Farizah Ansarudin, Siti Masrinda Tasirin, Mohd Zaidi Omar, Muhammad Fauzi Mohd. Zain, Zulhaidi Amil, Mohd. Huzairi Johari, Roslena Md Zaini, Nor Rajaie Hashim, Siti Nurul Hunadia Husin, Nooraini Ahmad. (2015). An Overview Of Effective Postgraduate Supervision Style Based On Assessment And Supervisory Model. - Jurnal Teknologi. 95-98.

M.s. Salleh, M.z. Omar, J. Syarif. (2015). The Effects Of Mg Addition On The Microstructure And Mechanical Properties Of Thixoformed Al-5%si-cu Alloys. - Journal Of Alloys And Compounds. 121-130.

S.m. Tasirin, M.z. Omar, F. Esa, N.m. Zulkifli, Z. Amil. (2015). Measuring Student Satisfaction Towards Engineering Postgraduate Programme In Ukm. - Journal Of Engineering Science And Technology. 100-109.

Y. S. Kong, M. Z. Omar, L. B. Chua And S. Abdullah. (2014). Ride Quality Assessment Of Bus Suspension System Through Modal Frequency Response Approach. - Advances In Mechanical Engineering. 1-17.

M.n. Mohammed, M.z. Omar, J. Syarif & M.s. Salleh. (2014). Morphological Evolution During Partial Re-melting Of Aisi D2 Cold-work Tool Steel. - Sains Malaysiana. 1213-1219.

Y.s. Kong, M.z. Omar, L.b. Chua, S. Abdullah. (2014). Fatigue Life Prediction Of Parabolic Leaf Spring Under Various Road Conditions. - Engineering Failure Analysis. 92-103.

M.s. Salleh, M.z. Omar, J. Syarif & M.n. Mohammed. (2014). Permodelan Termodinamik Aloi Al-si-cu Untuk Pemprosesan Logam Separa Pepejal. - Sains Malaysiana. 43(5): 791-798.

M.s. Salleh, M.z. Omar, J. Syarif, K.s. Alhawari, M.n. Mohammed. (2014). Microstructure And Mechanical Properties Of Thixoformed A319 Aluminium Alloy. - Materials And Design. 64 (2014) 142-152.

Junaidi Syarif, Eko Kurniawan, Zainuddin Sajuri & Mohd Zaidi Omar. (2013). Influence Of Iron On Phase Stability And Corrosion Resistance Of Ti-15%cr Alloy. - Sains Malaysiana. 42(12):1775-178.

Azrilah Abdul Aziz, Mohd Saidfudin Masodi, Faridah Mohamed Ibrahim, Mohd Zaidi Omar, Azami Zaharim. (2013). Insights Into Engineering Education Learning Outcome`s Assessment With Rasch Model. - Research Journal Of Applied Sciences, Engineering And Technology. 6(19):3520-3526.

Yuzainee Md Yusoff, Mohd. Zaidi Omar, Azami Zaharim, Azah Mohamed, Norhamidi Muhamad. (2012). Employability Skills Performance Score For Fresh Engineering Graduates In Malaysian Industry. - Asian Social Science. 8(16):140-145.

Arif, M.a.m., Omar, M.z., Muhamad, N.. (2012). Effect Of Solid Solution Treatment On Semisolid Microstructure Of Zn-22al Alloy. - Pertanika Journal Of Science And Technology. 20(1):121-127.

Salih A.a., Omar M.z., Syarif J., Sajuri Z.. (2012). An Investigation On The Microstructure And Mechanical Properties Of Quenched And Tempered Ss440c Martensitic Stainless Steel. - International Journal Of Mechanical And Materials Engineering. 7(2):119-123.

Arif, M.a.m., Omar, M.z., Muhamad, N.. (2011). Production Of Nondendritic Semisolid Za3 Alloy Through Heat Treatment. - Journal Of Applied Sciences. 11(2):323-329.

M.z. Omar, H.v. Atkinson, And P. Kapranos. (2011). Thixotropy In Semisolid Steel Slurries Under Rapid Compression. - Metallurgical And Materials Transactions A. 42(A):2807-2819.

Salih, A.a., Omar, M.z., Junaidi, S., Sajuri, Z.. (2011). Effect Of Different Heat Treatment On The Ss440c Martensitic Stainless Steel. - Australian Journal Of Basic And Applied Sciences. 5(12):867-871.

M.a.m. Daud, Z. Sajuri, J. Syarif, M.z. Omar. (2010). Effect Of Solution Treatment On Fatigue Crack Propagation Behaviour Of Magnesium Alloy. - International Review Of Mechanical Engineering (ireme). 4(3):238-243.

H. Budiman, M. Z. Omar, A. Jalar. (2010). Effect Of Slope Length To The Sphericity Of A356 Aluminium Alloy. - International Review Of Mechanical Engineering (i.re.m.e.). 4(7):840-845.

Alfan, A., Omar, M.z., Syarif, J., Sajuri, Z.. (2010). Direct Partial Remelting Of Xw-42 Steel In Semi-solid Zone. - Journal Of Applied Sciences. 10(13),1255-1262.

Azami Zaharim, Mohd Zaidi Omar, Shahrum Abdullah, Hassan Basri, Norhamidi Muhamad. (2009). International Trends And The Profiles Of Malaysian Engineers. - European Journal Of Scientific Research. 28(2):301-309.

Omar M.z., Atkinson H.v., Howe A.a., Palmiere E.j., Kapranos P., Ghazali M.j.. (2009). Solid-liquid Structural Break-up In M2 Tool Steel For Semi-solid Metal Processing. - Journal Of Materials Science. 44(3):869-874.

A. Muchtar, M.z. Omar, A. Hunger. (2009). Lessons From The Joint Ukm-ude (malaysia-germany) Student Mobility Programs. - European Journal Of Social Sciences. 8(3):413-419.

Abdullah S., Fahruddin A., Syarif J., Omar M.z., Zulkifli R.. (2009). Fatigue Crack Growth Modelling Of Fibre Metal Laminate (fml) Composite. - European Journal Of Scientific Research. 35(1):43-53.

T.n.rohmannudin. J.syarif, M.z.omar, Z,sajuri & A.r.daud. (2009). Changes In Phase Stability On Ti-10at.% Mo Alloy By Alloying Elements. - International Journal Of Mechanical And Materials Engineering. 4(2):172-175.

Budiman H., Omar M.z., Jalar A., Jaharah A.g.. (2009). Effect Of Water Cooling On The Production Of Al-si Thixotropic Feedstock By Cooling Slope Casting. - European Journal Of Scientific Research. 32(2):158-166.

Omar M.z., Kofli N.t., Mat K., Darus Z.m., Osman S.a., Rahman M.n.a.. (2009). Measuring The Outcomes From Industrial Training Program. - European Journal Of Social Sciences. 8(4):581-588.

Darus Z.m., Khalim A, Hashim N.a., Omar Z., Saruwono M., Mohammad N.. (2009). Development Of Sustainable Campus: Universiti Kebangsaan Malaysia Planning And Strategy. - Wseas Transactions On Environment And Development. 5(3):273-282.

Mohd Nizam Ab Rahman, Mohd Zaidi Omar, Norhisham Tan Kofli, Kamaruzaman Mat, Siti Aminah Osman, Zuhairusse M Darus. (2009). Assessment Of Engineering Students Perception After Industrial Training Placement. - European Journal Of Social Sciences. 8(3):420-431.

S.h. Salleh, M.z. Omar, J. Syarif, S. Abdullah. (2009). Carbide Formation During Precipitation Hardening Of Ss440c Steel. - European Journal Of Scientific Research. 34(1):83-91.

S. Abdullah, A. Fahruddin, J. Syarif And M. Z. Omar. (2009). Modelling Of Fiber Metal Laminate (fml) Composite Using The Residual Stiffness And Strength Model. - International Journal Of Mechanical And Materials Engineering (ijmme). 4(2):186-190.

A. G. Jaharah, C. H. Che Hassan, M. J. Ghazali, A. B. Sulong, M. Z. Omar, M. Z.nuawi, A. R. Ismail. (2009). Performance Of Uncoated Carbide Cutting Tool When Machining Cast Iron In Dry Cutting Condition. - International Journal Of Modern Physics B. 23(6-7):1796-1802.

M. A. M. Daud , M. Z. Omar, J. Sharif And Z. Sajuri. (2009). Effect Of Solution Treatment On Fatigue Properties Of Magnesium Alloy. - International Journal Of Mechanical And Materials Engineering (ijmme). 4(2):204-207.

Zuhairuse Md Darus, Siti Nurhidayah Abdul Manan, Nor Atikah Hashim, Roslan Saat, Azami Zaharim & Zaidi Omar. (2008). Native Regionalism In Development Of Sustainable Resort In Malaysia. - Wseas Transactions On Environment And Development. 4(12):1109-1119.

M.j. Ghazali, W.m. Rainforth, M.z. Omar. (2008). A Comparative Study Of Mechanically Mixed Layers (mmls) Characteristics Of Commercial Aluminium Alloys Sliding Against Alumina And Steel Sliders. - Journal Of Materials Processing Technology. 201(1-3):662-668.

R. Fadhila, A.g. Jaharah, M.z. Omar, C.h.c. Haron, M.j. Ghazali, And C. H. Azhari. (2007). Austenite Formation Of Steel-3401 Subjected To Rapid Cooling Process. - Int. J Of Mech And Material. 2(2):150-153.

M.j. Ghazali, J.a. Ghani, M.z. Omar. (2007). Plastic Deformation Characteristics Of Worn Precipitation-hardened Aluminium Alloys. - International Journal Of Mechanical & Materials Engineering. 2(2):125-129.

Prosiding Terindeks

M.a. Gebril, M.z. Omar, I.f. Mohamed, N.k. Othman And M.a.h. Abdelgnei. (2018). Corrosion Improvement And Microstructure Evaluation Of Sem-solid A356 Alloy By Ecap Process. - Iop Conf. Series: Journal Of Physics: Conference Series. .

M.a. Abdelgnei, M.z. Omar And M.j. Ghazali. (2018). Wear Properties Of Thixoformed Ai-5.7si-2cu-o.3mg Aluminium Alloy. - 15th International Conference On Semi-solid Processing Of Alloys And Composites. .

M.n , Mohammed, M.z. Omar, Salah Ai-zubaidi, K,s. Alhawari, Ma Abdelgnei. (2018). Weldability And Joining Characteristics Of Aisi D2/aisi 304 Steels Using Semisolid Diffusion Joining. - 15th International Conference On Semi-solid Processing Of Alloys And Composites. .

Abdullah M.f., Abdullah S., Omar M.z., Sajuri Z., Risby M.s.. (2015). Analysis Of Variable Strain Amplitude Response Caused By Impact Loading Of Carbon Nanotube Reinforced Magnesium Alloy Az31b. - Procedia Engineering. 10-17.

M.n. Mohammed, M. Z. Omar, J. Syarif, Z. Sajuri, M. S. Salleh, K. S. Alhawari. (2015). Semi-solid Joining Of D2 Cold-work Tool Steel. - Solid State Phenomena. 355-360.

M. S. Salleh, M. Z. Omar, J. Syarif, K.s. Alhawari, M.n. Mohammed. (2015). Effects Of Cu On The Microstructures And Tensile Properties Of Thixoformed Al-si Alloys. - Solid State Phenomena. 91-98.

Nordin Jamaluddin, Afida Ayob, Siti Aminah Osman, Mohd Zaidi Omar, Norhisham Tan Kofli, Suhana Johar. (2013). Undergraduate Industrial Training Experience: A Win-win Situation For Students, Industry And Faculty. - Procedia Social And Behavioral Sciences - 6th International Forum On Engineering Education (ifee 2012). .

A. Ayob, S.a. Osman, M.z. Omar, N. Jamaluddin, N.t. Kofli, S. Johar. (2013). Industrial Training As Gateway To Engineering Career : Experience Sharing. - Procedia Social And Behavioral Sciences - 6th International Forum On Engineering Education (ifee 2012). .

Mohd Zaidi Omar, Ruhizan Mohammad Yasin, Roszilah Hamid, Norngainy Mohd Tawil, Kamaruzaman Yusoff And Mohamad Sattar Rasul. (2013). Procedia Social And Behavioral Sciences - 6th International Forum On Engineering Education (ifee 2012). - . .

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Riza Atiq Abdullah O.k. Rahmat. (2012). Measuring Engineering Employability Skills. - Technology Innovations In Education - Proceedings Of The 8th Wseas International Conference On Educational Technologies (edute `12). .

Siti Khadijah Najid, Siti Aminah Osman, Mohd Zaidi Omar, Kamarulzaman Mat, Norhisham Tan Kofli, Maslina Jamil Dan Nordin Jamaluddin. (2012). Perception Of Faculty Engineering And Built Environment Students Towards The Benefit Of Industrial Training. - Procedia Social And Behavioral Science - Ukm Teaching And Learning Congress 2011. .

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramlee Mustapha And Riza Atiq Abdullah O.k. Rahmat. (2012). Engineering Employability Skills For Malaysian Industry: Framework. - Proceedings Of The 8th Wseas International Conference On Educational Technologies (edute`12). .

M.y. Yuzainee, A. Zaharim & M. Z. Omar. (2011). Employability Skills For An Entry-level Engineer As Seen By Malaysian Employers. - 2011 Ieee Global Engineering Education Conference, Educon 2011; Amman; 4-6 April 2011. .

A. Alfan, M.z. Omar, J. Syarif. (2011). On The Microstructure Of Xw-42 Steel After Direct Partial Remelting. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

Mohd Huzairi Johari, Roslena Md.zaini, Azami Zaharim, Hassan Basri, Mohd. Zaidi Omar. (2011). Perception And Expectation Toward Engineering Graduates By Employers : A Ukm Study Case. - 3rd International Congress On Engineering Education (iceed 2011) , Kuala Lumpur. .

Johari J., Sahari J., Abd Wahab D., Abdullah S., Abdullah S., Omar M.z., Muhamad N.. (2011). Difficulty Index Of Examinations And Their Relation To The Achievement Of Programme Outcomes. - Kongres Pengajaran Dan Pembelajaran Ukm, 2010; Tanjung Keling, Melaka. .

H. Budiman, M. Z. Omar, A. Jalar And J. Syarif. (2011). Investigation On Cooling Slope And Conventional Stir Cast A356/al2o3 Metal Matrix Composites. - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen (advanced Materials Research). .

Mat, K., Omar, M.z., Osman, S.a., Kofli, N.t., Abd.rahman, M.n., Jamil, M., Jamaluddin, N.. (2011). The Effectiveness Of Industrial Training On Ukm Engineering Students. - Kongres Pengajaran Dan Pembelajaran Ukm, 2010; Tanjung Keling, Melaka (procedia - Social And Behavioral Sciences). .

Azami Zaharim, Yuzainee Md Yusoff, Azah Mohamed, Mohd Zaidi Omar, Norhamidi Muhamad, Ramlee Mustapha. (2010). Practical Framework Of Employability Skills For Engineering Graduate In Malaysia. - Ieee Educon Education Engineering 2010 - The Future Of Global Learning Engineering Education, April 14-16, 2010, Madrid Spain. .

Saidfudin, M, Azrilah, A.a, Rodzo`an, N. A, Omar, M.z, Zaharim, A And Basri, H. (2010). Use Of Rasch Analysis To Measure Students Performance In Engineering Education. - 7h Wseas International Conference In Engineering Education (education 10 ), Corfu Island, Greece, July 22-24, 2010. .

Maslina Jamil, Mohd Zaidi Omar, Siti Aminah Osman, Norhisham Tan Kofli, Mohd Nizam Abdul Rahman, Kamarulzaman Mat. (2010). Competencies Achieved Through Industrial Training Programme. - 7th Wseas International Conference On Engineering Education (education '10), Corfu Island, Greece. .

M. A. M. Daud, M. Z. Omar, J. Syarif And Z. Sajuri. (2010). Critical Stress Intensity Factor Determination For Az61 Magnesium Alloy. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur(key Engineering Materials). .

Saidfudin, M, Azrilah, A.a, Rodzo`an, N. A, Omar, M.z, Zaharim A And Basri, H. (2010). Easier Learning Outcomes Analysis Using Rasch Model In Engineering Education Research. - 7th Wseas International Conference In Engineering Education (education 10 ), Corfu Island, Greece, July 22-24, 2010. .

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramlee Mustafa. (2009). Employers' Selection Skills In Recruiting Fresh Engineering Graduates. - 2009 International Conference On Engineering Education (lceed 2009), December 7-8, 2009, Kuala Lumpur, Malaysia. .

Buku Penyelidikan

Mohd Zaidi Omar, Saziana Samat, Intan Fadhlina Mohamed. (2022). Pemprosesan Logam Separa Pepejal: Pendekatan Industri Automotif. - . 183.

Fariza Md Sham, Ishak Yussof, Zaidi Omar, Wan Zawiah Wan Zin @ Wan Ibrahim. (2018). Bidang Keberhasilan Strategik Ukm (pelan Strategik Ukm 2014-2025). - . 67.

M.s. Salleh, M.z. Omar, J. Syarif. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 24.

Mariyam Jemeelah Ghazali, Mohd Zaidi Omar, Che Husna Azhari, Kamarul Afizi Kosman & Shahril Mohamad. (2016). Teknologi Di Alam Melayu. - . 9.

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 5 : 85-100.

Mohd Zaidi Omar, Azami Zaharim, Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . 131.

Mohd Huzairi Johari, Yuzainee Md Yusoff, Mohd Zaidi Omar & Azami Zaharim. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 1 : 17-30.

Yuzainee Md Yusoff, Mohd Zaidi Omar, Azami Zaharim & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 6 : 101-119.

Roslena Md. Zaini, Mohd Zaidi Omar, Yuzainee Md Yusoff & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 2, 31-45.

Che Husna Azhari, Mariyam Jameelah Ghazali, Andanastuti Muchtar, Mohd Zaidi Omar. (2014). Advances In Materials Processing. - . 307.

Nuraini Khatimin, Yuzainee Md Yusoff, Mohd Zaidi Omar & Azami Zaharim. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 3 : 46-68.

Yuzainee Md Yusoff, Mohd Zaidi Omar, Azami Zaharim & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 4 : 69-84.

Ja`afar Sahari, Syazrin Aklili, Dzuraidah Abd Wahab, Ruhizan Mohd Yasin, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan, Shahrir Abdullah, Mohd Zaidi Omar, Norhamidi Muhamad. (2012). Mercu Kesarjanaan Pengajaran Dan Pembelajaran, Penyelidikan Tindakan Di Institusi Pengajian Tinggi. - . 175-189.

Saidfudin. M , Azrilah. A.a, Rodzo?an. N. A, Omar. M.z, Zaharim. A And Basri. H. (2011). Computers And Simulation In Modern Science (volume V). - . 6:30-35.

Saidfudin, M , Azrilah, A.a, Rodzo?an, N. A, Omar, M.z, Zaharim, A And Basri, H. (2011). Computers And Simulation In Modern Science (volume V). - . 5:23-29.

Y.m. Yusoff, M.z. Omar, A. Zaharim, A. Mohamed, N. Muhamad, R. Mustapha. (2011). Computers And Simulation In Modern Science (volume V). - . 3:12-17.

Mj Ghazali, Mz Omar & A Jalar. (2009). Sains Dan Teknologi Alam Melayu. - . 384.

Che Husna Azhari, Andanastuti Muchtar, Mohd Zaidi Omar, Mariyam Jameelah Ghazali. (2009). Advances In Materials Processing Volume 2. - . 340.

Bab Dalam Buku

M.s. Salleh, M.z. Omar, J. Syarif. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 24.

C.h. Azhari, M.z. Omar, S. Abdullah. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 4.

Mariyam Jemeelah Ghazali, Mohd Zaidi Omar, Che Husna Azhari, Kamarul Afizi Kosman & Shahril Mohamad. (2016). Teknologi Di Alam Melayu. - . 9.

Nuraini Khatimin, Yuzainee Md Yusoff, Mohd Zaidi Omar & Azami Zaharim. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 3 : 46-68.

Yuzainee Md Yusoff, Mohd Zaidi Omar, Azami Zaharim & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 4 : 69-84.

Mohd Huzairi Johari, Yuzainee Md Yusoff, Mohd Zaidi Omar & Azami Zaharim. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 1 : 17-30.

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 5 : 85-100.

Roslena Md. Zaini, Mohd Zaidi Omar, Yuzainee Md Yusoff & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 2, 31-45.

Yuzainee Md Yusoff, Mohd Zaidi Omar, Azami Zaharim & Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . Bab 6 : 101-119.

Mariyam Jameelah Ghazali, Mohd Zaidi Omar, Che Husna Azhari, Kamarul Afizi Kosman Dan Shahril Mohamad. (2012). Sains Dan Teknologi Di Alam Melayu. - . 153-161.

Saidfudin. M , Azrilah. A.a, Rodzo?an. N. A, Omar. M.z, Zaharim. A And Basri. H. (2011). Computers And Simulation In Modern Science (volume V). - . 6:30-35.

Y.m. Yusoff, M.z. Omar, A. Zaharim, A. Mohamed, N. Muhamad, R. Mustapha. (2011). Computers And Simulation In Modern Science (volume V). - . 3:12-17.

Saidfudin, M , Azrilah, A.a, Rodzo?an, N. A, Omar, M.z, Zaharim, A And Basri, H. (2011). Computers And Simulation In Modern Science (volume V). - . 5:23-29.

Mj Ghazali, Mz Omar & A Jalar. (2009). Sains Dan Teknologi Alam Melayu. - . 384.

Penulisan Dalam Bahasa Melayu

Mohd Zaidi Omar, Saziana Samat, Intan Fadhlina Mohamed. (2022). Pemprosesan Logam Separa Pepejal: Pendekatan Industri Automotif. - . 183.

Ishak Yussof, Mohd. Zaidi Omar, Fariza Md. Sham, Wan Zawiah Wan Zin. (2019). Pelan Stategik Ukm 2019-2021. - . 49.

Che Husna Azhari, Mohd Zaidi Omar, Shahrum Abdullah. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 146.

Fariza Md Sham, Ishak Yussof, Zaidi Omar, Wan Zawiah Wan Zin @ Wan Ibrahim. (2018). Bidang Keberhasilan Strategik Ukm (pelan Strategik Ukm 2014-2025). - . 67.

Mohd Zaidi Omar, Azami Zaharim, Abdul Wahab Mohammad. (2014). Kemahiran Kebolehgajian Graduan Kejuruteraan. - . 131.

Che Husna Azhari, Mariyam Jameelah Ghazali, Andanastuti Muchtar, Mohd Zaidi Omar. (2014). Advances In Materials Processing. - . 307.

Che Husna Azhari, Andanastuti Muchtar, Mohd Zaidi Omar, Mariyam Jameelah Ghazali. (2009). Advances In Materials Processing Volume 2. - . 340.

Penerbitan Lain-lain

Abu Bakar Bin Sulong;norhamidi Bin Muhamad;mohd. Zaidi Bin Omar;zainuddin Bin Sajuri;nabilah Afiqah Binti Mohd Radzuan;mohd Ikram Bin Ramli. (2023). Mechanism In Processability Of Copper-aluminium-manganese Shape Memory Alloys (smas) Through Powder Injection Moulding (pim). - . .

Nur Syahirah Zainuddin, Wan Fathul Hakim W. Zamri, Mohd Zaidi Omar, Muhamad Faiz Bin Md Din. (2023). A Brief Review On Failure Of Steam Turbine Blades And Preventative Measures. - The 7th Symposium On Damage Mechanics Of Materials And Structures (sdmms2023). 1-22.

Mohd. Zaidi Bin Omar;abu Bakar Bin Sulong;zainuddin Bin Sajuri;intan Fadhlina Binti Mohamed. (2023). Mechanical Properties And Microstructural Evolution Of Thixoformed Graphene Nanosheets Reinforced Aluminium Alloy Matrix Composites. - . .

Mohd. Zaidi Bin Omar;zainuddin Bin Sajuri;intan Fadhlina Binti Mohamed. (2022). Effect Of Equal Channel Angular Pressing On Microstructural Development And Tensile Properties Of Er-modified Al-15%mg2si Metal Matrix Composite. - . .

Intan Fadhlina Binti Mohamed;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;zainuddin Bin Sajuri;wan Fathul Hakim Bin W. Zamri;nashrah Hani Binti Jamadon. (2022). Giant Straining Of Highly Commercial Aluminum Alloys Via High-pressure Torsion Process For Vehicle Applications. - . .

Norhamidi Bin Muhamad;mohd. Zaidi Bin Omar;abu Bakar Bin Sulong;nashrah Hani Binti Jamadon;farhana Binti Mohd Foudzi. (2022). Effect Of Metal-ceramic (bi-material) On Inter-surface Bonding By Micro Co-powder Injection Molding. - . .

Mohd. Zaidi Bin Omar;ishak Bin Yussof;mohd Azlan Shah Bin Zaidi;fariza Bt. Md. Sham;saidi Bin Ismail;suhaila Binti Zainudin;ermizal Sha Bin Hassan;siti Norliza Binti Ibrahim;wan Zawiah Binti Wan Zin @ Wan Ibrahim;nor Hisham Bin Bontak;nor Saribon Binti Ra. (2022). Pembangunan Sistem Pengurusan Kra Ukm. - . .

Ishakyussof,fariza Md. Sham,prof. Dr. Mohd. Zaidi Omar Prof. Madya Dr. Wan Zawiah Wan Zin Encik Saidi Bin Ismail Puan Zaimi Makhtar Puan Nor Saribon Ramli,encik Barudin Baharin,ahmad Hazreen Wagiman Puan Nur Hazimah Abd. Kadir. (2021). Buletin Strategik Ukm Bil 15/2019. - Ishakyussof,fariza Md. Sham,prof. Dr. Mohd. Zaidi Omar Prof. Madya Dr. Wan Zawiah Wan Zin Encik Saidi Bin Ismail Puan Zaimi Makhtar Puan Nor Saribon Ramli,encik Barudin Baharin,ahmad Hazreen Wagiman. 1-4.

Zainuddin Sajuri, Shahrum Abdullah, Mohd Zaidi Omar, Mohd Radzi Abu Mansor, Wan Aizon W Ghopa, Azhari Shamsudeen, Mohd Atif Sholehuddin, Mohd Esa Baruji. (2021). Kajian Kompetensi Pekerja Terhadap Jentera Berat (heavy Machinery) Laporan Akhir. - . 1-193.

Lilia Bt. Halim;nor Aishah Binti Buang;kamisah Bt. Osman;azmin Sham Binti Rambely;mohd. Zaidi Bin Omar;salwani Binti Abdullah;azuraliza Binti Abu Bakar. (2021). The Effectiveness Of Blended Stem Mentoring Program. - . .

Mohd. Zaidi Bin Omar;lilia Bt. Halim;azmin Sham Binti Rambely;azuraliza Binti Abu Bakar;azami Bin Zaharim;rosdiadee Bin Nordin;mohamad Sattar Bin Rasul. (2021). Pengaruh Pencapaian Akademik Dalam Subjek Stem Terhadap Kebolehgajian Graduan Teknologis. - . .

Zainuddin Bin Sajuri;ahmad Kamal Ariffin Bin Mohd Ihsan;mohd. Zaidi Bin Omar;shahrum Bin Abdullah. (2021). Computationally Inverse Model For The Fatigue And Fracture Characterization Of Structural Steel Materials In Corrosive Environment. - . .

Mohd. Zaidi Bin Omar;che Hassan Bin Che Haron;rizauddin Bin Ramli;wan Aizon Bin W Ghopa. (2020). Mechanical Integrity And Machinability Of Cast And Thixoformed Al-si-mg Novel Aluminium Alloys. - . .

Lilia Halim, Nurazidawati Mohamad Arsad, Nor Aishah Buang, Kamisah Osman, Azmin Sham Rambely, Mohd Zaidi Omar, Salwani Abdullah, Azuraliza Abu Bakar. (2020). Intervensi Pembangunan Website Online Mentoring: Estementoring. - . 1-26.

Zainuddin Sajuri, Shahrum Abdullah, Mohd Zaidi Omar, Mohd Radzi Abu Mansor, Wan Aizon Wan Ghopa, Azhari Shamsudeen. (2020). Kajian Kompetensi Kajian Kompetensi Pekerja Terhadap Jentera Berat (heavy Machinery). - Laporan Perundingan Ukm-niosh. 1-163.

Zainuddin Bin Sajuri;che Husna Bt. Azhari;andanastuti Muchtar;rozli Bin Zulkifli;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;intan Fadhlina Binti Mohamed. (2020). Development Of Light Weight Materials For Ballistic Applications In Tropical Climates. - . .

Norman Mohd Saleh , Zaidi Omar , Azlan Shah Zaidi , Wan Zawiah Wan Zin ,sarah Aziz Zaimi Makhtar, Nor Saribon, Hazreen Wagiman , Nur Hazimah. (2020). Buletin Strategik Ukm Bil. 16 / 2020. - Ishakyussof,fariza Md. Sham,prof. Dr. Mohd. Zaidi Omar Prof. Madya Dr. Wan Zawiah Wan Zin Encik Saidi Bin Ismail Puan Zaimi Makhtar Puan Nor Saribon Ramli,encik Barudin Baharin,ahmad Hazreen Wagiman. 1-8.

Lilia Halim, Tuan Mastura Tuan Soh, Nurazidawati Mohamad Arsad, Zaidi Omar, Kamisah Osman. (2019). Mentoring Models Of Stem Learning Towards A Stem Learning Ecosystem Framework. - The 18th International Expo On Inventions And Innovations. 2.

Ishakyussof,fariza Md. Sham,prof. Dr. Mohd. Zaidi Omar Prof. Madya Dr. Wan Zawiah Wan Zin Encik Saidi Bin Ismail Puan Zaimi Makhtar Puan Nor Saribon Ramli,encik Barudin Baharin,ahmad Hazreen Wagiman Puan Nur Hazimah Abd. Kadir. (2019). Buletin Strategik Bil 14 / 2019. - Ishakyussof,fariza Md. Sham,prof. Dr. Mohd. Zaidi Omar Prof. Madya Dr. Wan Zawiah Wan Zin Encik Saidi Bin Ismail Puan Zaimi Makhtar Puan Nor Saribon Ramli,encik Barudin Baharin,ahmad Hazreen Wagiman P. 1-2.

Lilia Bt. Halim, Nurazidawati Binti Mohamad Arsad, Nor Aishah Binti Buang, Kamisah Bt. Osman, Azmin Sham Binti Rambely, Mohd. Zaidi Bin Omar, Salwani Binti Abdullah, Azuraliza Binti Abu Bakar. (2019). Laporan Cabaran Perdana Pengukuhan Stem. - . 1-15.

Mohd. Marzuki Mustafa,dr. Wan Zawiah Wan Zin,mohd Zaidi Omar, Fariza Md. Sham, Zanudin Mohd Daud, Zaimi Makhtar,nor Saribon Ramli, Saipulizam Abd. Ghani Saadah Hj. Jaffar,barudin Baharin,ahmad Hazreen Wagiman,nur Hazimah Abd. Kadir. (2018). Buletin Keberhasilan Strategik Bil 12 2018. - Pembangunan Sahsiah: Siswazah Beraspirasi Kebangsaan Berkompeten, Berdaya Saing Dan Inovatif. .

Mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;zainuddin Bin Sajuri;wan Aizon Bin W Ghopa. (2018). Thixoforming Of Novel Aluminium Alloys. - . .

Prof. Dato Ir. Dr.marzuki Mustafa, P.m.dr. Wan Zawiah Wan Zin, P.dr.zaidi Omar , P.m.dr. Fariza Md Sham, Saidi Ismail, Zaimi Makhtar, Nor Saribon Ramli , Barudin Baharin, Ahmad Hazreen Wagiman, Nur Hazimah Abd Kadir. (2018). Buletin Keberhasilan Strategik Bilangan 11(edisi Khas 2018). - Ukm Menjuarai. .

Andanastuti Muchtar, Ishak Ahmad, Rohimi Shapiee, Wan Zurinah Wan Ngah, Shahrir Abdullah, Nor Hashimah Jalaluddin, Salmi Md. Nooraini, Mohd. Zaidi Omar, Mohd Fuad Jali, Zainul Rashid Mohd Razi, Mohamat Sabri Hassan, Jamia Azdina Jamal And [twelve Others]. (2018). Peraturan-peraturan Universiti Kebangsaan Malaysia (pengajian Siswazah) 2015. - . .

Shahrum Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri, Baba Md Deros, Azhari Shamsudeen, Mohd Radzi Abu Mansor, Wan Aizon Wan Ghopa, Wan Fathul Hakim W. Zamri, Kamal Halili Hassan & Rozanah Ab Rahman. (2017). Kajian Penambahbaikan Sistem Pengurusan Keselamatan Kren Menara Di Sektor Pembinaan. - . .

Mohd Zaidi Omar, Rozli Zulkifli, Rosdiadee Nordin, Zulkifli Mohd Nopiah, Mohd Farid Mohamed, Suraya Shahril, Wan Nor Roslam Wan Isahak, Azhari Shamsudeen, Mohd Huzairi Johari, Muhamad Fadle Mohamad Abu Sadin & Siti Hajar Mohammad. (2017). Research Bulletin Innovate-engineering And Built Environment (vol 10). - . 1-144.

Shahrum Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri, Baba Md Deros, Kamal Halili Hassan, Rozanah Ab Rahman, Mohd Radzi Abu Mansor, Wan Aizon W Ghopa, Wan Fathul Hakim W Zamri & Azhari Shamsudeen. (2017). Laporan Interim 2: Kajian Penambahbaikan Sistem Pengurusan Keselamatan Kren Menara Di Sektor Pembinaan. - . .

Mohd. Marzuki Mustafa,dr. Wan Zawiah Wan Zin,mohd Zaidi Omar, Fariza Md. Sham, Zanudin Mohd Daud, Zaimi Makhtar,nor Saribon Ramli,barudin Baharin,ahmad Hazreen Wagiman,nur Hazimah Abd. Kadir. (2017). Buletin Keberhasilan Strategik Bil 13 2018. - University Ranking - Cerminan Kebitaraan Universiti?. .

Mohd Zaidi Omar, Rozli Zulkifli, Rosdiadee Nordin, Zulkifli Mohd Nopiah, Mohd Farid Mohamed, Suraya Shahril, Wan Nor Roslam Wan Isahak, Roslena Binti Md Zaini, Azhari Shamsudeen, Mohd Huzairi Johari, Siti Hajar Mohammad. (2016). Research Bulletin (engineering & Built Environment). - . 1-122.

Mohd Zaidi Omar, Rozli Zulkifli, Rosdiadee Nordin, Zulkifli Mohd Nopiah, Mohd Farid Mohamed, Suraya Shahril, Wan Nor Roslam Wan Isahak, Roslena Md Zaini, Azhari Shamsudeen, Mohd Huzairi Johari & Siti Hajar Mohammad. (2016). Research Bulletin Innovate-engineering And Built Environment. - . .

Shahrum Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri, Baba Md Deros, Kamal Halili Hassan, Rozanah Ab Rahman, Mohd Radzi Abu Mansor, Wan Aizon Wan Ghopa, Wan Fathul Hakim W Zamri & Azhari Shamsudeen. (2016). Laporan Interim 1: Kajian Penambahbaikan Sistem Pengurusan Keselamatan Kren Menara Di Sektor Pembinaan. - . .

Shahrum Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri, Baba Md Deros, Kamal Halili Hassan, Rozanah Ab Rahman, Mohd Radzi Abu Mansor, Wan Aizon Wan Ghopa, Wan Fathul Hakim W. Zamri & Azhari Shamsudeen. (2016). Laporan Awal: Kajian Penambahbaikan Sistem Pengurusan Keselamatan Kren Menara Di Sektor Pembinaan. - . .

Mohd. Zaidi Bin Omar. (2015). Development Of Novel Aluminium Alloys For Semi-solid Processing. - . .

Mohd. Zaidi Bin Omar, Azman Bin Jalar @ Jalil, Sallehuddin Bin Mohamed Haris, Mohd. Zaki Bin Nuawi, Shahrum Bin Abdullah. (2014). Development Of Suspension System For Heavy Vehicles. - . .

A. Ayob, S.a. Osman, M.z. Omar, N. Jamaluddin, N.t. Kofli, S. Johar. (2012). Industrial Training As Gateway To Engineering Career : Experience Sharing. - International Forum On Engineering Education (ifee) 2012. .

S.a. Osman, S.i. Naam, M.z. Omar, N.t. Kofli, A. Ayob & S. Johar. (2012). Employer Perceptions Of Student Ability During Industrial Training As Assessed By The Rasch Model. - International Forum On Engineering Education (ifee) 2012. .

Z. Sajuri, M.a.m. Daud, M.z. Omar & J. Syarif. (2010). Dynamic Fracture Toughness Of An Extruded Az61 Magnesium Alloy. - Proceeding Of International Conference Of Applied Mechanics, Materials And Manufacturing (icammm 2010), Oman. .

Che Husna Azhari, Shahrir Abdullah, Riza Atiq O.k. Rahmat, Aini Hussain, Paraidathathu T. Thomas, Mohd. Zaidi Omar, Nabishah Mohamad, Che Hassan Che Haron, Dzuraidah Abd Wahab, Wan Zurinah Wan Ngah. (2009). Self Review Portfolio For The Mqa Institutional Audit. - Area 7: Programme Monitoring And Review. .

Che Husna Azhari, Shahrir Abdullah, Riza Atiq Ok Rahmat, Aini Hussain, Paraidathathu T. Thomas, Mohd Zaidi Omar, Nabishah Mohamad, Che Hassan Che Haron, Dzuraidah Abd Wahab, Wan Zurinah Wan Ngah. (2009). Self Review Portfolio For The Mqa Institutional Audit. - . .

Che Husna Azhari, Shahrir Abdullah, Riza Atiq Ok Rahmat, Aini Hussain, Paraidathathu T. Thomas, Mohd Zaidi Omar, Nabishah Mohamad, Che Hassan Che Haron, Dzuraidah Abd Wahab, Wan Zurinah Wan Ngah. (2009). Part B: Area 2 Curriculum Design & Delivery. - Self Review Portfolio For The Mqa Institutional Audit. .

H. Nofriady, J. Syarif, Mohd. Zaidi Omar. (2009). Difference In Tensile Behavior Between Cu Free Dual Phase Steel And Cu Bearing Dual Phase Steel. - 4th International Conference On Recent Advances In Materials, Minerals & Environment 2009 And 2nd Asian Symposium On Materials And Processing 2009.. .

A. Alfan, M.z. Omar, J. Syarif And M.j. Ghazali. (2009). Vanadis 4 Steel Behaviour In Semi Solid Zone Prior To Thixoforming Process. - 4th International Conference On Recent Advances In Materials, Minerals & Environment 2009 And 2nd Asian Symposium On Materials And Processing 2009. .

S.h.salleh, M.z.omar, J.syarif And S.abdullah. (2009). Microstructural Characterization Of Carbides In 440c Martensitic Stainless Steel. - 4th International Conference On Recent Advances In Materials, Minerals & Environment 2009 And 2nd Asian Symposium On Materials And Processing 2009. .

M.a. M. Daud , M. Z. Omar, J. Sharif And Z. Sajuri. (2009). Influence Of Solution Treatment And Fatigue Crack Propagation Behavior Of Magnesium Alloy. - 4th International Conference On Recent Advances In Materials, Minerals & Environment 2009 And 2nd Asian Symposium On Materials And Processing 2009.penang, Malaysia. .

T.n.rohmannudin, J. Syarif, M.z. Omar, Z. Sajuri And A.r. Daud. (2009). Effect Of Sintering On Alloying Behavior And Microstructural Change Of Ti-10at.%mo-10at.%cr Alloy.. - 4th International Conference On Recent Advances In Materials, Minerals & Environment 2009 And 2nd Asian Symposium On Materials And Processing 2009.. .

Jaharah A.g., Che Hassan, Ghazali M.j.,md.deros B., M.z. Nuawi, M.z.. (2008). Performance Of Uncoated Carbide Tool When Machining Cast Iron In Dry Condition. - 5 Th International Conference On Advanced Mateerial And Processing, Harbin, China, 2-5 Sep 2008. .

Curriculum Vitae

PROF. DR. MOHD. ZAIDI BIN OMAR

Penerbitan Berimpak Tinggi

Penerbitan WOS

Penerbitan SCOPUS/ERA

Prosiding Terindeks

Buku Penyelidikan

Bab Dalam Buku

Penulisan Dalam Bahasa Melayu

Penerbitan Lain-lain

Aktif

Tamat

Anugerah UKM

Anugerah-anugerah Lain

Pelajar Sarjana

Pelajar Doktor Falsafah

Khidmat Luar

Khidmat Dalam