Untuk Kegunaan UKM sahaja

For UKM use only

Curriculum Vitae


MAKLUMAT ASAS

PROF. MADYA DR. MOHD. ZAKI BIN NUAWI

PENSYARAH UNIVERSITI
JABATAN KEJURUTERAAN MEKANIKAL & PEMBUATAN
No.rasmi UKM : 03 8921 5555
BIOGRAFI /BIOGRAPHY

Mohd Zaki Nuawi currently works at the Department of Mechanical and Manufacturing Engineering, National University of Malaysia. Mohd Zaki does research in Statistical Signal Analysis and Instrumentation Engineering, Acoustic Engineering and Mechanical Engineering. Their current project is mechanical signal analysis for material characterisation.

KELAYAKAN AKADEMIK / ACADEMIC QUALIFICATION
(Bidang Pengajian),(Peringkat),(Institusi),(Tahun)
Kejuruteraan Mekanik dan Bahan , Doktor Falsafah , UKM , 2008
KEJ. INDUSTRI , Sarjana , UNIV. OF PICARDIE, FRANCE , 1994
KEJ. INDUSTRI , Sarjana Muda , UNIV. OF PICARDIE, FRANCE , 1992
KEPAKARAN / EXPERTISE
TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (Statistical Mechanical Signal Analysis)
PENERBITAN TERKINI / LATEST PUBLICATION

Penerbitan Berimpak Tinggi

Muhammad Imran Sadiq, Wan Aizon W. Ghopa, Mohd Zaki Nuawi, Mohammad Rasidi Rasani And Mohd Anas Mohd Sabri.  (2022).  Experimental And Numerical Investigation Of Static And Dynamic Characteristics Of Bio-oils And Sae40 In Fluid Film Journal Bearing.  - Materials.  1-14. 
Muhammad Imran Sadiq, Wan Aizon Ghopa, Mohd Zaki Nuawi, Mohammad Rasidi Rasani And Sofian Ibrahim.  (2022).  An Experimental Investigation Of Static Properties Of Bio-oils And Sae40 Oil In Journal Bearing Applications.  - Materials.  1-14. 
Muhammad Imran Sadiq, Wan Aizon W. Ghopa, Mohd. Zaki Nuawi, Mohammad Rasidi Rasani, Nor Kamaliana Khamis, Mohd Radzi Abu Mansor.  (2022).  Investigation Of Stiffness And Damping Coefficients In Fluid Film Bearing With Bio Oils And Mineral Based Oil.  - Energy Report.  419-429. 
A.a.a. Rahim, S. Abdullah, S.s.k. Singh, M.z. Nuawi.  (2021).  Fatigue Strain Signal Reconstruction Technique Based On Selected Wavelet Decomposition Levels Of An Automobile Coil Spring.  - Engineering Failure Analysis.  1-14. 
J.a. Ghani, M.n.a.m. Dali, H.a. Rahman, C.h.c. Haron, W.m.f. Wan Mahmood,m.r.m. Rasani, M.z. Nuawi.  (2019).  Analysis Of Dimple Structure Fabricated Using Turning Process And Subsequent Reduction In Friction.  - Wear.  1280-1285. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi & Che Hassan Che Haron.  (2018).  An Embedded Multi-sensor System On The Rotating Dynamometer For Real-time Condition Monitoring In Milling.  - The International Journal Of Advanced Manufacturing Technology.  811-823. 
M. Rizal , J.a.ghani , M.z.nuawi, C.h.c.haron.  (2017).  Cutting Tool Wear Classification And Detection Using Multi-sensor Signals And Mahalanobis-taguchi System.  - Wear.  1759-1765. 
T.e. Putra, S. Abdullah, D. Schramm, M.z. Nuawi, T. Bruckmann.  (2017).  Reducing Cyclic Testing Time For Components Of Automotive Suspension System Utilising The Wavelet Transform And The Fuzzy C-means.  - Mechanical Systems And Signal Processing.  1-14. 
T.e. Putra, S. Abdullah, D. Schramm, M.z. Nuawi, T. Bruckmann.  (2017).  The Need To Generate Realistic Strain Signals At An Automotive Coil Spring For Durability Simulation Leading To Fatigue Life Assessment.  - Mechanical Systems And Signal Processing.  432-447. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2016).  Utilizing Hilbert Huang Transform In Detection Some Of Mechanical Properties Of The Refractory Metals.  - Mechanical Systems And Signal Processing.  449-461. 
Nadom Khalifa Mutlib, Shahrizan Bin Baharom, Ahmed El-shafie And Mohd Zaki Nuawi.  (2016).  Ultrasonic Health Monitoring In Structural Engineering: Buildings And Bridges.  - Structural Control And Health Monitoring.  409-422. 
Putra T.e., Abdullah S., Schramm D., Nuawi M.z., Bruckmann T..  (2015).  Generating Strain Signals Under Consideration Of Road Surface Profiles.  - Mechanical Systems And Signal Processing.  485-497. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2015).  Using The Pressure Transmission Coefficient Of A Transmitted Wave To Evaluate Some Of The Mechanical Properties Of Refractory Metals.  - Ultrasonics.  133-140. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron.  (2015).  Development And Testing Of An Integrated Rotating Dynamometer On Tool Holder For Milling Process.  - Mechanical Systems And Signal Processing.  559-576. 
Karim Z., Nuawi M.z., Ghani J.a., Ghazali M.j., Abdullah S., Mansor N.i.i..  (2015).  Sliding Wear Evaluation Of Aluminum Alloy (7075-t6) On Hardened Steel (aisi4340) Via Non-contact Technique By I-kaz™ Multi-level Analysis.  - Wear.  99-104. 
M.m. Padzi, S. Abdullah, M.z. Nuawi.  (2014).  On The Need To Decompose Fatigue Strain Signals Associated To Fatigue Life Assessment Of The Aisi 1045 Carbon Steel.  - Materials And Design.  57 (2014) 405-415. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Dian Darina Indah Daruis.  (2014).  New Regression Models For Predicting Noise Exposure In The Driver`s Compartment Of Malaysian Army Three-tonne Trucks.  - Advances In Mechanical Engineering.  2014:1-12. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris And Mohd Zaki Nuawi.  (2014).  Influence Of A Silver Epoxy Dopant On The Performance Of Broken Piezoelectric Ceramic Transducer Based On An Analytical Model.  - Smart Materials And Structures.  23:1-13. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron.  (2013).  Online Tool Wear Prediction System In The Turning Process Using An Adaptive Neuro-fuzzy Inference System.  - Applied Soft Computing.  13(4):1960-1968. 
M.j. Ghazali, N.i.i. Mansor, M.z. Nuawi, J.a. Ghani.  (2013).  Facile Wear Failure Monitoring Of Commercial Bearing Alloys Using I-kaz Method.  - Engineering Failure Analysis.  35:545-553. 
J.a. Ghani, M. Rizal, M.z. Nuawi, M.j. Ghazali, C.h.c. Haron.  (2011).  Monitoring Online Cutting Tool Wear Using Low-cost Technique And User-friendly Gui.  - Wear.  271(9-10):2619? 2624. 

Penerbitan WOS

N. A. Kasim, M. Z. Nuawi, J. A. Ghani, Muhammad Rizal, N. A. Ngatiman & C. H. C. Haron.  (2021).  Enhancing Clustering Algorithm With Initial Centroids In Tool Wear Region Recognition.  - International Journal Of Precision Engineering And Manufacturing.  843-863. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh And Mohammad Zaki Nuawi.  (2021).  Fatigue Life Analysis Using Wavelet-based Signal Decomposition.  - International Journal Of Materials And Product Technology.  138-147. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh And Mohammad Zaki Nuawi.  (2020).  Selection Of The Optimum Decomposition Level Using The Discrete Wavelet Transform For Automobile Suspension System.  - Journal Of Mechanical Science And Technology.  137-142. 
Nor Azizi Ngatiman, Mohd. Zaki Nuawi, Mohd Irman Ramli.  (2019).  Pattern Recognition For Hev Engine Diagnostic Using An Improved Statistical Analysis.  - Jurnal Kejuruteraan.  287-294. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh And Mohd. Zaki Nuawi.  (2019).  Reliability Assessment On Automobile Suspension System Using Wavelet Analysis.  - International Journal Of Structural Integrity.  602-611. 
N. A. Kasim, M. Z. Nuawi, J. A. Ghani, M. Rizal, M. A. F. Ahmad And C. H. Che Haron.  (2019).  Cutting Tool Wear Progression Index Via Signal Element Variance.  - Journal Of Mechanical Engineering And Sciences.  4596-4612. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Mohammad Rasidi Mohammad Rasani, Shahrum Abdullah, Muhamad Arif Fadli Ahmad, Muhammad Fazrin Abdullah.  (2018).  Development Of Polymer Mechanical Properties Characteristics Using I-kaz 4d Analysis Method.  - Jurnal Teknologi. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Hambali Boejang, Mohd Farriz Basar, Kho Ko Seng.  (2018).  Comparison Study On Light Structure Modal Parameter Using Experimental Modal Analysis Method Via Piezofilm Sensor.  - Jurnal Teknologi. 
A. A. A. Rahim, S. S. K. Singh, S. Abdullah, M. Z. Nuawi.  (2018).  Strain Signal Characterisation Using The 4th Order Of Daubechies Wavelet Transform For Fatigue Life Determination.  - International Journal Of Integrated Engineering. 
Nor Kamaliana Khamis, Baba Md Deros, Mohd Zaki Nuawi, Dieter Schramm.  (2018).  Pattern Of Muscle Contraction In Car Pedal Control.  - Jurnal Kejuruteraan. 
M. F. Mod Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi, S. S. K. Singh.  (2018).  Probabilistic-based Analysis For Damaging Features Of Fatigue Strain Loadings.  - Frattura Ed Integrita Strutturale. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2018).  Role Of Piezoelectric Elements In Finding The Mechanical Properties Of Solid Industrial Materials.  - Applied Sciences. 
M.a.f. Ahmad, M.z. Nuawi, A.r. Bahari, A.s. Kechot And S.m. Saad.  (2017).  Correlation And Clusterisation Of Traditional Malay Musical Instrument Sound Using The I-kaztm Statistical Signal Analysis.  - Journal Of Mechanical Engineering And Sciences.  2552-2566. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Kho Ko Seng, Muhamad Arif Fadli Ahmad.  (2017).  Novel Technique Of Modal Analysis For Light Structure Via Piezofilm Sensor: A Comparison Study.  - Jurnal Teknologi.  15-20. 
Ahmed B. Atrah, Mohd Syuhaimi Ab-rahman, Hanim Salleh, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Nordin Bin Jamaludin.  (2017).  Karman Vortex Creation Using Cylinder For Flutter Energy Harvester Device.  - Micromachine.  1-12. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi.  (2017).  Evaluation Of Fatigue Damage Classification Based On Probabilistic Weibull Analysis.  - Iranian Journal Of Science And Technology, Transactions Of Mechanical Engineering.  189-195. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Muhamad Arif Fadli Ahmad, Kho Ko Seng.  (2017).  An Investigation On Light Structure Modal Parameter By Using Experimental Modal Analysis Method Via Piezofilm Sensor.  - Jurnal Teknologi.  159-165. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi.  (2017).  K-means Clustering Analysis And Artificial Neural Network Classification Of Fatigue Strain Signals.  - Journal Of The Brazilian Society Of Mechanical Sciences And Engineering.  757-764. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi.  (2017).  Probability Analysis In Determining The Behaviour Of Variable Amplitude Strain Signal Based On Extraction Segments.  - Latin American Journal Of Solids And Structures.  2141-2152. 
Nadom Khalifa Mutlib, Shahrizan Baharom, Mohd Zaki Nuawi, Ahmed El-shafie.  (2016).  Ultrasonic Surfacewave Monitoring For Steel Fibre-reinforced Concrete Using Gel-coupled Piezoceramic Sensors: A Case Study.  - Arabian Journal For Science And Engineering.  1273-1281. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor.  (2015).  Predicting Whole-body Vibration (wbv) Exposure Of Malaysian Army Three-tonne Truck Drivers Using Integrated Kurtosis-based Algorithm For Z-notch Filter Technique 3d (i-kaz 3d).  - International Journal Of Industrial Ergonomics.  59-68. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi And Mohd Jailani Mohd Nor.  (2015).  Journal Of Occupational Health.  - New Regression Model For Predicting Hand-arm Vibration ( Hav ) Of Malaysian Army ( Ma ) Three-tonne Truck Steering Wheels.  513-520. 
M. B. Ali, S. Abdullah, M. Z. Nuawi, A. K. Ariffin, Z. M. Nopiah.  (2014).  Evaluating Instrumented Charpy Impact Strain Signals Using Curve Fitting Equations.  - Journal Of Central South University.  21(2):600-609. 
K. A Zakaria, S. Abdullah, M. J. Ghazali, M. Z. Nuawi, S.m. Beden & Z. M. Nopiah.  (2014).  Fatigue Strain Signal Behaviour And Damage Assessment Of An Engine Mount Bracket.  - Journal Of Scientific & Industrial Research.  73(2014):112-116. 
M. M. Padzi, S. Abdullah, M. Z. Nuawi, S. M. Beden, Z.m. Nopiah.  (2014).  Evaluating Ultrasound Signals Of Carbon Steel Fatigue Testing Using Signal Analysis Approaches.  - Journal Of Central South University.  21(1):232-241. 
Mahfodzah Md Padzi, Shahrum Abdullah, Mohd Zaki Nuawi.  (2013).  Fatigue Behaviour Monitoring Of An Aisi 1045 Carbon Steel Using The Statistical-based Z-notched Approach.  - Materials Testing.  55(5):361-368. 
S. Abdullah, C.k.e. Nizwan, M. F. M. Yunoh, M. Z. Nuawi And Z. M. Nopiah.  (2013).  Fatigue Features Extraction Of Road Load Time Data Using The S-transform.  - International Journal Of Automotive Technology.  14(5):805-815. 
Mahfodzah Md. Padzi, Shahrum Abdullah, Mohd Zaki Nuawi.  (2013).  Assessment Of Fatigue Behaviour Under Different Loading Sequences Using Signal Analysis Approaches.  - Materials Testing.  55(3):168-178. 
Jaharah A. Ghani, Poh Siang Jye, Che Hassan Che Haron, Muhammad Rizal, Mohd Zaki Nuawi.  (2012).  Determination Of Sensor Location For Cutting Tool Deflection Using Finite Element Method Simulation.  - Proceedings Of The Institution Of Mechanical Engineers, Part C: Journal Of Mechanical Engineering Science.  226(9):2373-2377. 
Rabbi`atul, N., Norzali, A., Badri, K.h., Nuawi, M.z..  (2011).  Effect Of Aluminum Hydroxide Loading On The Compression Stress And Modulus, Thermal Conductivity And Acoustic Properties Of Palm-based Polyurethane Hybrid Composite.  - Sains Malaysiana.  40(4):379-384. 
Nor Rabbi`atul Adawiyah Norzali, Khairiah Haji Badri & Mohd Zaki Nuawi.  (2011).  Loading Effect Of Aluminium Hydroxide Onto The Mechanical, Thermal Conductivity, Acoustical And Burning Properties Of The Palm-based Polyrethane Composites.  - Sains Malaysiana.  40(7):737-742. 

Penerbitan SCOPUS/ERA

Salman Aslam Ramdan, Mohammad Rasidi Rasani, Thinesh Subramaniam, Ahmad Sobri Muda, Ahmad Fazli Abdul Aziz, Tuan Mohammad Yusoff Shah Tuan Ya, Hazim Moria, Mohd Faizal Mat Tahir, Mohd Zaki Nuawi.  (2022).  Blood Flow Acoustics In Carotid Artery.  - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences.  28-44. 
Haniff Abdul Rahman, Muhammad Rizal, Jaharah A. Ghani, Muhammad Amirul Syahfikri Mazlan, Mohd Zaki Nuawi1, Che Hassan Che Haron, Mohd Nur Alfath Suliman, Abdul Hadi Mehamud Zelun.  (2022).  Semiconductor Strain Gauges As Potential Replacement To Metal Foil For Cutting Force Measurement In Machining Process.  - Jurnal Tribologi.  137-147. 
Muhammad Imran Sadiq, Wan Aizon W. Ghopa, Mohd Zaki Nuawi, Mohammad Rasidi Rasani And Mohd Anas Mohd Sabri.  (2022).  Experimental And Numerical Investigation Of Static And Dynamic Characteristics Of Bio-oils And Sae40 In Fluid Film Journal Bearing.  - Materials.  1-14. 
Muhammad Imran Sadiq, Wan Aizon Ghopa, Mohd Zaki Nuawi, Mohammad Rasidi Rasani And Sofian Ibrahim.  (2022).  An Experimental Investigation Of Static Properties Of Bio-oils And Sae40 Oil In Journal Bearing Applications.  - Materials.  1-14. 
Muhammad Imran Sadiq, Wan Aizon W. Ghopa, Mohd. Zaki Nuawi, Mohammad Rasidi Rasani, Nor Kamaliana Khamis, Mohd Radzi Abu Mansor.  (2022).  Investigation Of Stiffness And Damping Coefficients In Fluid Film Bearing With Bio Oils And Mineral Based Oil.  - Energy Report.  419-429. 
Ismail Mustapha, Mohamad Hanif Md Saad, Mohd Zaki Nuawi, Suhairy Sani, Shukri Mohd, Siti Fatahiyah Mohamad,ratna Suffhiyanni Omar.  (2022).  Investigation Of Internal Gas Leakage On The Gate Valve Using Acoustic Signal.  - International Journal Of Integrated Engineering.  57-65. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh And Mohammad Zaki Nuawi.  (2021).  Fatigue Life Analysis Using Wavelet-based Signal Decomposition.  - International Journal Of Materials And Product Technology.  138-147. 
Nor Azazi Ngatiman, Mohd Zaki Nuawi, Azma Putra, Isa S. Qamber, Tole Sutikno & Mohd Hatta Jopri.  (2021).  Spark Plug Failure Detection Using Z-freq And Machine Learning.  - Telkomnika (telecommunication Computing Electronics And Control).  2020-2029. 
N. A. Kasim, M. Z. Nuawi, J. A. Ghani, Muhammad Rizal, N. A. Ngatiman & C. H. C. Haron.  (2021).  Enhancing Clustering Algorithm With Initial Centroids In Tool Wear Region Recognition.  - International Journal Of Precision Engineering And Manufacturing.  843-863. 
A.a.a. Rahim, S. Abdullah, S.s.k. Singh, M.z. Nuawi.  (2021).  Fatigue Strain Signal Reconstruction Technique Based On Selected Wavelet Decomposition Levels Of An Automobile Coil Spring.  - Engineering Failure Analysis.  1-14. 
Nor Afandi Sharif, Rizauddin Ramli, Mohd Zaki Nuawi, Mohammad Soleimani Amiri, Abdullah Zawawi Mohamed, Khairulbadri Ahmad.  (2021).  Magnetic Flux Leakage (mfl) Defect Characterization Using I-kaz Statistical Analysis For Non-destructive Test (ndt) Application.  - Journal Of Engineering Science And Technology.  3015-3024. 
R Samin, N Azman, Mz Nuawi, Sm Haris, Ja Ghani.  (2020).  Optimization Of The Surface Roughness For Titanium Ti6a14v In Turning Process Using Taguchi Method.  - Test Engineering And Management.  1072-1078. 
Z. Karim, Amid Arwaneh, Ahmad Yasir M. S And M. Z. Nuawi.  (2020).  Multi Sensor Tool Condition Monitoring System Using Mahalanobis I-kaz Prediction System.  - International Journal Of Advanced Science And Technology.  4407-4417. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh And Mohammad Zaki Nuawi.  (2020).  Selection Of The Optimum Decomposition Level Using The Discrete Wavelet Transform For Automobile Suspension System.  - Journal Of Mechanical Science And Technology.  137-142. 
Z. Karim, Azman Hussin, Ahmad Yasir M. S, M. Z. Nuawi.  (2019).  Vibration-based Online Tool Wear Monitoring Using Piezo Film Sensor Analyzed By I-kaz Multilevel Signal Feature.  - International Journal Of Engineering And Advanced Technology.  3937-3403. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh And Mohd. Zaki Nuawi.  (2019).  Reliability Assessment On Automobile Suspension System Using Wavelet Analysis.  - International Journal Of Structural Integrity.  602-611. 
J.a. Ghani, M.n.a.m. Dali, H.a. Rahman, C.h.c. Haron, W.m.f. Wan Mahmood,m.r.m. Rasani, M.z. Nuawi.  (2019).  Analysis Of Dimple Structure Fabricated Using Turning Process And Subsequent Reduction In Friction.  - Wear.  1280-1285. 
Mohd Nor Fakhzan Mohd Kazim, Rasidi Rasani, Mohd Zaki Nuawi, Zambri Harun, Yap Khang Hau, Mohd Shukry Abdul Majid.  (2019).  Analysis Of Wake Region Behind Bluff Body For Piezoelectric Energy Harvester.  - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences.  249-263. 
N. A. Kasim, M. Z. Nuawi, J. A. Ghani, M. Rizal, M. A. F. Ahmad And C. H. Che Haron.  (2019).  Cutting Tool Wear Progression Index Via Signal Element Variance.  - Journal Of Mechanical Engineering And Sciences.  4596-4612. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi & Che Hassan Che Haron.  (2018).  An Embedded Multi-sensor System On The Rotating Dynamometer For Real-time Condition Monitoring In Milling.  - The International Journal Of Advanced Manufacturing Technology.  811-823. 
Z. Karim, Izatul Hamimi Abdul Razak, A.y.m. Said, M.z. Nuawi, J.a. Ghani,.  (2018).  Strain Gauge-based Online Tool Wear Monitoring Using I-kaz Multilevel Signal.  - Journal Of Advanced Research In Dynamical And Control Systems. 
A. A. A. Rahim, S. S. K. Singh, S. Abdullah, M. Z. Nuawi.  (2018).  Strain Signal Characterisation Using The 4th Order Of Daubechies Wavelet Transform For Fatigue Life Determination.  - International Journal Of Integrated Engineering. 
Nadia Nurnajihah Mohamad Nasir, Shahrum Abdullah, Salvinder Singh Karam Singh, Mohd Faridz Yunoh, Mohd Zaki Nuawi, Sallehudin Mohd Haris.  (2018).  Time-frequency Strain Data Analysis Of Suspension Using The Hilbert-huang Transform.  - Journal Of Mechanical Engineering. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Hambali Boejang, Mohd Farriz Basar, Kho Ko Seng.  (2018).  Comparison Study On Light Structure Modal Parameter Using Experimental Modal Analysis Method Via Piezofilm Sensor.  - Jurnal Teknologi. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Mohammad Rasidi Mohammad Rasani, Shahrum Abdullah, Muhamad Arif Fadli Ahmad, Muhammad Fazrin Abdullah.  (2018).  Development Of Polymer Mechanical Properties Characteristics Using I-kaz 4d Analysis Method.  - Jurnal Teknologi. 
M. F. Mod Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi, S. S. K. Singh.  (2018).  Probabilistic-based Analysis For Damaging Features Of Fatigue Strain Loadings.  - Frattura Ed Integrita Strutturale. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2018).  Role Of Piezoelectric Elements In Finding The Mechanical Properties Of Solid Industrial Materials.  - Applied Sciences. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi, A. Ariffin.  (2018).  Classification Of Fatigue Damaging Segments Using Artificial Neural Network.  - Journal Of Mechanical Engineering. 
A. A. Rahim, C. H. Chin, S. Abdullah, S. S. K. Singh, M. Z. Nuawi And F. H. A. Hassan.  (2018).  Characterization Of Wavelet Decomposition Strain Signal Using The K-mean Clustering Method.  - International Journal Of Engineering & Technology. 
Nor Azazi Ngatiman, Mohd Zaki Nuawi, Shahrum Abdullah.  (2018).  Z-freq: Signal Analysis-based Gasoline Engine Monitoring Technique Using Piezo-film Sensor.  - International Journal Of Mechanical Engineering And Technology. 
A. A. A. Rahim, S. Abdullah, S. S. K. Singh, And M. Z. Nuawi.  (2018).  Relationship Between Time Domain And Frequency Domain Strain Signal Application To Real Data.  - Journal Of Mechanical Engineering. 
Nor Azazi Ngatiman, Mohd Zaki Nuawi.  (2018).  Hybrid Vehicle Engine Misfire Detection Using Piezo-film Sensors And Analysing With Z-freq.  - Journal Of Mechanical Engineering. 
Khamis, N.k., Deros, B.m., Schramm, D., Koppers, M., Maas, N., And Nuawi, M.z..  (2018).  Deltoid Anterior Contraction In Maneuvering The Steering Wheel.  - Malaysian Journal Of Public Health Medicine. 
M. A. F. Ahmad, M. Z. Nuawi, J. A. Ghani, S. Abdullah Dan A. N. Kasim.  (2018).  Tool Wear Monitoring Using Macro Fibre Composite As A Vibration Sensor Via I-kaztm Statistical Signal Analysis.  - Arpn Journal Of Engineering And Applied Sciences. 
Ahmed B. Atrah, Mohd Syuhaimi Ab-rahman, Hanim Salleh, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Nordin Bin Jamaludin.  (2017).  Karman Vortex Creation Using Cylinder For Flutter Energy Harvester Device.  - Micromachine.  1-12. 
T.e. Putra, S. Abdullah, D. Schramm, M.z. Nuawi, T. Bruckmann.  (2017).  The Need To Generate Realistic Strain Signals At An Automotive Coil Spring For Durability Simulation Leading To Fatigue Life Assessment.  - Mechanical Systems And Signal Processing.  432-447. 
M.i. Ramli, M.z. Nuawi, M.r.m. Rasani, S. Abdullah, K. K. Seng.  (2017).  Modal Analysis Study On Aluminum 6061 Using Accelerometer And Piezoelectric Film Sensor.  - International Journal Of Applied Engineering Research. 
M. Rizal , J.a.ghani , M.z.nuawi, C.h.c.haron.  (2017).  Cutting Tool Wear Classification And Detection Using Multi-sensor Signals And Mahalanobis-taguchi System.  - Wear.  1759-1765. 
Z. Karim, A. Y. M. Said, M. Z. Nuawi, J. A. Ghani And A. R. Bahari.  (2017).  Value Prediction Of Materials Mechanical Properties Using I-kaz Analysis Method During Impact Test: Experimental Study.  - International Journal Of Applied Engineering Research.  14608-14619. 
Abdul Rahim Bahari, Aminatuzzaharah Musa, Mohd Zaki Nuawi, Zairi Ismael Rizman, Suziana Mat Saad.  (2017).  Novel Statistical Clustering Method For Accurate Characterization Of Word Pronunciation.  - International Journal On Advance Science, Engineering And Information Technology.  1172-1177. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi.  (2017).  Probability Analysis In Determining The Behaviour Of Variable Amplitude Strain Signal Based On Extraction Segments.  - Latin American Journal Of Solids And Structures.  2141-2152. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi.  (2017).  K-means Clustering Analysis And Artificial Neural Network Classification Of Fatigue Strain Signals.  - Journal Of The Brazilian Society Of Mechanical Sciences And Engineering.  757-764. 
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi.  (2017).  Evaluation Of Fatigue Damage Classification Based On Probabilistic Weibull Analysis.  - Iranian Journal Of Science And Technology, Transactions Of Mechanical Engineering.  189-195. 
M. I. Ramli, M. Z. Nuawi, S. Abdullah, M. R. M. Rasani, M. F. Basar, M. A. F. Ahmad And K. K. Seng.  (2017).  Novel Technique Of Modal Analysis On Small Structure Using Piezoelectric Film Sensor And Accelerometer.  - Arpn Journal Of Engineering And Applied Sciences.  4902-4912. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Muhamad Arif Fadli Ahmad, Kho Ko Seng.  (2017).  An Investigation On Light Structure Modal Parameter By Using Experimental Modal Analysis Method Via Piezofilm Sensor.  - Jurnal Teknologi.  159-165. 
M.a.f. Ahmad, M.z. Nuawi, A.r. Bahari, A.s. Kechot And S.m. Saad.  (2017).  Correlation And Clusterisation Of Traditional Malay Musical Instrument Sound Using The I-kaztm Statistical Signal Analysis.  - Journal Of Mechanical Engineering And Sciences.  2552-2566. 
Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Kho Ko Seng, Muhamad Arif Fadli Ahmad.  (2017).  Novel Technique Of Modal Analysis For Light Structure Via Piezofilm Sensor: A Comparison Study.  - Jurnal Teknologi.  15-20. 
T.e. Putra, S. Abdullah, D. Schramm, M.z. Nuawi, T. Bruckmann.  (2017).  Reducing Cyclic Testing Time For Components Of Automotive Suspension System Utilising The Wavelet Transform And The Fuzzy C-means.  - Mechanical Systems And Signal Processing.  1-14. 
Ismail F.r., Nuawi M.z., Schramm D., Khamis N.k..  (2016).  Suitability Of Driving Simulators As A Tool To Study Driving Fatigue Due To Vibration And Environment: A Review.  - Malaysian Journal Of Public Health Medicine.  95-101. 
Ismail F.r., Khamis N.k., Nuawi M.z., Schramm D., Hesse B..  (2016).  Measurement Of Heart Rate To Determine Car Drivers’ Performance Impairment In Simulated Driving: An Overview.  - Jurnal Teknologi.  15-23. 
Karim Z., Nuawi M.z., Ghani J.a., Said A.y.m..  (2016).  Preliminary Study On Machining Condition Monitoring System Using 3-channel Force Sensor Analyzed By I-kaz Multilevel Method.  - International Journal On Advanced Science, Engineering And Information Technology.  508-511. 
Bahari A.r., Nuawi M.z., Idham Mohd Zulkipli M.f., Abd Rahman H..  (2016).  An Impulsive Excitation Approach For Fatigue Strength Property Characterisation Analysis Of Polymers.  - Jurnal Teknologi.  23-29. 
Nadom Khalifa Mutlib, Shahrizan Baharom, Mohd Zaki Nuawi, Ahmed El-shafie.  (2016).  Ultrasonic Surfacewave Monitoring For Steel Fibre-reinforced Concrete Using Gel-coupled Piezoceramic Sensors: A Case Study.  - Arabian Journal For Science And Engineering.  1273-1281. 
Nor Kamaliana K., Baba Md Deros, Dieter Schramm, Benjamin Hesse, Mohd Zaki Nuawi, Faizul Rizal Ismail.  (2016).  Subjective And Indirect Methods To Observe Drivers Drowsiness And Alertness An Overview.  - Journal Of Engineering Science And Technology.  28-39. 
Ahmad M.s., Nuawi M.z., Othman A., Fadli Ahmad M.a..  (2016).  Metallic Material Characterization Using Acoustics Signal Analysis.  - Jurnal Teknologi.  31-37. 
Nor Kamaliana Khamis, Faizul Rizal Ismail, Benjamin Hesse, Dieter Schramm, Niko Maas, Martin Koppers, Mohd Zaki Nuawi, Baba Md Deros.  (2016).  Suitability Of Heart Rate Recording As Physiological Measures Tool To Determine Drivers` Performance Impairment: A Preliminary Study.  - Jurnal Teknologi.  25-30. 
M.s. Othman, M.z. Nuawi And R. Mohamed.  (2016).  Induction Motor Bearing Fault Diagnostics Using I-kaztm And Decision Tree Classification.  - International Journal Of Automotive And Mechanical Engineering (ijame).  3361-3372. 
Normah Abdullah, Ramin Razmi, Tan Chung Chuan, Zulkifi Mohd Nopiah, Azah Mohamed, Mohd Zaki Nuawi.  (2016).  Design And Simulation Of Hierarchical Control Of Two Continuous Stirred Tank Heater In Series.  - Indian Journal Of Science And Technology.  1-12. 
N.h.m. Tahir, R. Muhammad, J. A. Ghani, M. Z. Nuawi, C. H. C. Haron.  (2016).  Monitoring The Flank Wear Using Piezoelectric Of Rotating Tool Of Main Cutting Force In End Milling.  - Jurnal Teknologi.  45-51. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor.  (2016).  Development Of Noise And Vibration Exposure Monitoring System For Malaysian Army (ma) Three-tonne Trucks.  - Jurnal Teknologi.  9-15. 
M. Siba, W. Wanmahmood, M. Zaki Nuawi, R. Rasani, M. Nassir.  (2016).  Flow-induced Vibration In Pipes: Challenges And Solutions - A Review.  - Journal Of Engineering Science And Technology.  362-382. 
Mohd Sufian Othman, Mohd Zaki Nuawi And Ramizi Mohamed.  (2016).  Experimental Comparison Of Vibration And Acoustic Emission Signal Analysis Using Kurtosis-based Methods For Induction Motor Bearing Condition Monitoring.  - Przeglad Elektrotechniczny.  208-212. 
Nadom Khalifa Mutlib, Shahrizan Bin Baharom, Ahmed El-shafie And Mohd Zaki Nuawi.  (2016).  Ultrasonic Health Monitoring In Structural Engineering: Buildings And Bridges.  - Structural Control And Health Monitoring.  409-422. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2016).  Utilizing Hilbert Huang Transform In Detection Some Of Mechanical Properties Of The Refractory Metals.  - Mechanical Systems And Signal Processing.  449-461. 
Nor Kamaliana Khamis, Nadzirah Basrah, Baba Md Deros, Mohd Zaki Nuawi.  (2015).  Electromyography As An Objective Measurement For Evaluating Physical Fatigue: An Overview.  - Jurnal Teknologi.  51-57. 
S.s. Ziyad, M.z. Nuawi, Mohammed T. Jasim, A.r. Bahari And F.m. Nadia.  (2015).  Characterisation Of Polymer Material Using I-kaztm Analysis Method Under Impact Hammer Excitation Technique.  - Journal Of Applied Sciences.  138-145. 
Karim Z., Nuawi M.z., Ghani J.a., Ghazali M.j., Abdullah S., Mansor N.i.i..  (2015).  Sliding Wear Evaluation Of Aluminum Alloy (7075-t6) On Hardened Steel (aisi4340) Via Non-contact Technique By I-kaz™ Multi-level Analysis.  - Wear.  99-104. 
Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, Mohd Z. Nuawi, Rasidi Rasani, And Mohamed H. Nassir.  (2015).  Wall Pressure Due To Turbulent Flow Through Orifice Plate.  - International Journal Of Mechanical & Mechatronics Engineering.  36-41. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron.  (2015).  Development And Testing Of An Integrated Rotating Dynamometer On Tool Holder For Milling Process.  - Mechanical Systems And Signal Processing.  559-576. 
M.f.m. Yunoh, S. Abdullah, M.h.m. Saad, Z.m. Nopiah, M.z. Nuawi.  (2015).  Fatigue Feature Extraction Analysis Based On A K-means Clustering Approach.  - Journal Of Mechanical Engineering And Sciences.  1275-1282. 
Putra T.e., Abdullah S., Schramm D., Nuawi M.z., Bruckmann T..  (2015).  Generating Strain Signals Under Consideration Of Road Surface Profiles.  - Mechanical Systems And Signal Processing.  485-497. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi And Mohd Jailani Mohd Nor.  (2015).  Journal Of Occupational Health.  - New Regression Model For Predicting Hand-arm Vibration ( Hav ) Of Malaysian Army ( Ma ) Three-tonne Truck Steering Wheels.  513-520. 
Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, Mohd Z. Nuawi, Rasidi Rasani, And Mohamed H. Nassir.  (2015).  Modeling And Applications Of 3d Flow In Orifice Plate At Low Turbulent Reynolds Numbers.  - International Journal Of Mechanical And Mechatronics Engineering.  19-25. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor.  (2015).  Predicting Whole-body Vibration (wbv) Exposure Of Malaysian Army Three-tonne Truck Drivers Using Integrated Kurtosis-based Algorithm For Z-notch Filter Technique 3d (i-kaz 3d).  - International Journal Of Industrial Ergonomics.  59-68. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2015).  Using The Pressure Transmission Coefficient Of A Transmitted Wave To Evaluate Some Of The Mechanical Properties Of Refractory Metals.  - Ultrasonics.  133-140. 
Mohd Sufian Othman, Mohd Zaki Nuawi, Ramizi Mohamed.  (2015).  Induction Motor Bearing Fault Detection Using Hybrid Kurtosis-based Method.  - International Journal Of Applied Engineering Research.  33452-33456. 
Elwaleed Awad Khidir, Nik Abdullah Nik Mohamed, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, Mohd Zaki Nuawi And Yousif Abdalla Abakr.  (2014).  Experimental Study On The Effect Of Compression On The Sound Absorption Of Date Palm Fibers.  - World Applied Sciences Journal.  40-44. 
M. B. Ali, S. Abdullah, M. Z. Nuawi, A. K. Ariffin, Z. M. Nopiah.  (2014).  Evaluating Instrumented Charpy Impact Strain Signals Using Curve Fitting Equations.  - Journal Of Central South University.  21(2):600-609. 
M. M. Padzi, S. Abdullah, M. Z. Nuawi, S. M. Beden, Z.m. Nopiah.  (2014).  Evaluating Ultrasound Signals Of Carbon Steel Fatigue Testing Using Signal Analysis Approaches.  - Journal Of Central South University.  21(1):232-241. 
M.m. Padzi, S. Abdullah, M.z. Nuawi.  (2014).  On The Need To Decompose Fatigue Strain Signals Associated To Fatigue Life Assessment Of The Aisi 1045 Carbon Steel.  - Materials And Design.  57 (2014) 405-415. 
K. A Zakaria, S. Abdullah, M. J. Ghazali, M. Z. Nuawi, S.m. Beden & Z. M. Nopiah.  (2014).  Fatigue Strain Signal Behaviour And Damage Assessment Of An Engine Mount Bracket.  - Journal Of Scientific & Industrial Research.  73(2014):112-116. 
Arshed Abdullah Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2014).  A New Way To Find The Modulus Of Elasticity.  - Journal Of Applied Sciences.  2939-2952. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris And Mohd Zaki Nuawi.  (2014).  Determination Of Static Modulus Of Elasticity Of Refractory Metals And Alloys From Acoustic Impedance Tests.  - Australian Journal Of Basic And Applied Sciences.  126-129. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Dian Darina Indah Daruis.  (2014).  New Regression Models For Predicting Noise Exposure In The Driver`s Compartment Of Malaysian Army Three-tonne Trucks.  - Advances In Mechanical Engineering.  2014:1-12. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi And Che Hassan Che Haron.  (2014).  A Review Of Sensor System And Application In Milling Process For Tool Condition Monitoring.  - Research Journal Of Applied Sciences, Engineering And Technology.  7(10): 2083-2097. 
Yunoh M.f.m., Abdullah S., Nopiah Z.m., Nuawi M.z..  (2014).  Fatigue Time History Analysis For Determining The Strain Signal Behaviour.  - International Journal Of Vehicle Systems Modelling And Testing.  363-371. 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris And Mohd Zaki Nuawi.  (2014).  Influence Of A Silver Epoxy Dopant On The Performance Of Broken Piezoelectric Ceramic Transducer Based On An Analytical Model.  - Smart Materials And Structures.  23:1-13. 
Muhammad Rizal,b, Jaharah A. Ghani, Mohd Zaki Nuawi, Mohamad Amir Shafiq Mohd Tahir, Che Hassan Che Haron.  (2014).  A Comparative Study Of I-kaz Based Signal Analysis Techniques: Application To Detect Tool Wear During Turning Process.  - Jurnal Teknologi.  66(3):99-105. 
M.f.m. Yunoh, S. Abdullah, M.h.m. Saad, Z.m. Nopiah And M.z. Nuawi.  (2014).  Fatigue Data Extraction Analysis Using Daubechies Wavelet Transform.  - Australian Journal Of Basic & Applied Sciences.  38-40. 
Khamis, N.k., Nuawi, M.z., Deros, B.m., Ismail, F.r., Mohamad, D. And Md Tahir, N.h..  (2014).  Assessment Of Whole Body Vibration Exposure Among Motorcyclist In Malaysia Under Different Speeds And Different Road Profiles: A Preliminary Study.  - Advances In Environmental Biology.  160-163. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Dian Darina Indah Daruis.  (2014).  Study Of Noise Exposure Inside A Malaysian Army Three-tonne Truck Driver`s Compartment Using I-kaztm.  - Defence S&t Technical Bulletin.  107-111. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron.  (2014).  A Wireless System And Embedded Sensors On Spindle Rotating Tool For Condition Monitoring.  - Advanced Science Letters.  1829-1832. 
N. Khalifa, S. Baharom, A.h. El Shafie, M. Z. Nuawi.  (2014).  Evaluation Of The Effect Of Debonding Between Steel And Concrete In Composite Deck Slabs On Lamb Waves.  - Australian Journal Of Basic And Applied Sciences.  17-20. 
M.f.m. Yunoh, S. Abdullah, Z.m. Nopiah & M.z. Nuawi.  (2013).  A Review Of Localised Time-frequency Features Classification Associated To Fatigue Data Analysis.  - International Review Of Mechanical Engineering.  960-976. 
Z. Karim, Izatul H.a.r., S.a.s. Azuan, Mastura S., A.y.m. Said, A.r. Bahari, J.a. Ghani, M.z. Nuawi.  (2013).  Material Mechanical Property Correlation Study Using Vibration Signal Analysis.  - Australian Journal Of Basic And Applied Sciences.  7(4):94-99. 
Mahfodzah Md Padzi, Shahrum Abdullah, Mohd Zaki Nuawi.  (2013).  Fatigue Behaviour Monitoring Of An Aisi 1045 Carbon Steel Using The Statistical-based Z-notched Approach.  - Materials Testing.  55(5):361-368. 
Mahfodzah Md. Padzi, Shahrum Abdullah, Mohd Zaki Nuawi.  (2013).  Assessment Of Fatigue Behaviour Under Different Loading Sequences Using Signal Analysis Approaches.  - Materials Testing.  55(3):168-178. 
Z. Karim, M.z .nuawi, A.y. Md. Said, J.a. Ghani & S. Abdullah.  (2013).  Integrated Kurtosis-based Algorithm For Z-notch Filter (i-kaztm) Multilevel Coefficients Responses Toward The Simultaneous Changes In Amplitude And Frequency Of Signals.  - Journal Of Applied Sciences.  13(2):232-241. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron.  (2013).  Online Tool Wear Prediction System In The Turning Process Using An Adaptive Neuro-fuzzy Inference System.  - Applied Soft Computing.  13(4):1960-1968. 
Z. Karim, M.z. Nuawi, J.a. Ghani, E.a. Azrulhisham And S. Abdullah.  (2013).  Development Of Machining Condition Monitoring System Using Piezoelectric Sensor Analyzed By I-kaz Multilevel Method.  - World Applied Sciences Journal.  21(2):264-268. 
S. Abdullah, C.k.e. Nizwan, M. F. M. Yunoh, M. Z. Nuawi And Z. M. Nopiah.  (2013).  Fatigue Features Extraction Of Road Load Time Data Using The S-transform.  - International Journal Of Automotive Technology.  14(5):805-815. 
M.j. Ghazali, N.i.i. Mansor, M.z. Nuawi, J.a. Ghani.  (2013).  Facile Wear Failure Monitoring Of Commercial Bearing Alloys Using I-kaz Method.  - Engineering Failure Analysis.  35:545-553. 
Jaharah A. Ghani, Poh Siang Jye, Che Hassan Che Haron, Muhammad Rizal, Mohd Zaki Nuawi.  (2012).  Determination Of Sensor Location For Cutting Tool Deflection Using Finite Element Method Simulation.  - Proceedings Of The Institution Of Mechanical Engineers, Part C: Journal Of Mechanical Engineering Science.  226(9):2373-2377. 
M. F. Mat Tahir, M. Z. Nuawi, R. Zulkifli, S. Abdullah, M. A. Mohd Sabri.  (2012).  Study On Correlation Of Sound Absorption Coefficient For Automotive Noise Absorption Panel Material By Using Sabine Method And Z-octave Method.  - International Review Of Mechanical Engineering (ireme).  6(3):640-643. 
N.k. Khamis, M.z. Nuawi, S. Abdullah, Z.m. Nopiah, L. Abdullah.  (2012).  Signal Analysis Software As An Educational Tool For Engine Diagnostic System.  - International Review Of Mechanical Engineering.  6(3):666-670. 
M. A. Mohd Sabri, M. Z. Nuawi, A. Arifin, M. F. Mohd Tahir, S. Abdullah.  (2012).  Study Of Correlation Between Strain And Structural-borne Ultrasonic Signals On Automobile Engine.  - International Review Of Mechanical Engineering.  6(3):607-610. 
J. A. Ghani, M. Rizal, M. Zaki Nuawi, C. H. Che Haron.  (2012).  Development Of An Adequate Online Tool Wear Monitoring System In Turning Process Using Low Cost Sensor.  - Advanced Science Letters.  13:702-706. 
Z. M. Nopiah, A. Lennie, S. Abdullah, M. Z. Nuawi, A. Z. Nuryazmin, M. N. Baharin.  (2012).  Effect Of Fatigue Strain Data Behaviour Using Cycle Counting Method.  - International Review Of Mechanical Engineering.  6(3):644-648. 
M.m. Padzi, S. Abdullah, M.z. Nuawi, A. Shamsudeen.  (2012).  Fatigue Failure Assessment Of Variable Amplitude Loading (val) On Carbon Steel Aisi 1045 Using I-kaz Approach.  - International Review Of Mechanical Engineering.  6(3):578-582. 
Jaharah A. Ghani, Poh Siang Jye, Che Hassan Che Haron, Muhammad Rizal, Mohd Zaki Nuawi.  (2012).  Relationship Between Measurement Of Cutting Force And Sensor Location In Turning Process.  - Jurnal Teknologi.  59:91-94. 
M. Z. Baharom, M. Z. Nuawi, G. Priyandoko, S. M. Haris.  (2012).  Electromagnetic Braking System Using Eddy Current For Brake Disc Of Al6061 And Al7075.  - International Review Of Mechanical Engineering.  6(3):588-594. 
Nor Rabbi`atul Adawiyah Norzali, Khairiah Haji Badri & Mohd Zaki Nuawi.  (2011).  Loading Effect Of Aluminium Hydroxide Onto The Mechanical, Thermal Conductivity, Acoustical And Burning Properties Of The Palm-based Polyrethane Composites.  - Sains Malaysiana.  40(7):737-742. 
J.a. Ghani, M. Rizal, M.z. Nuawi, M.j. Ghazali, C.h.c. Haron.  (2011).  Monitoring Online Cutting Tool Wear Using Low-cost Technique And User-friendly Gui.  - Wear.  271(9-10):2619? 2624. 
M. B. Ali, S. Abdullah, M. Z. Nuawi, M. M. Padzi & K. A. Zakaria.  (2011).  Experimental Analysis Of An Instrumented Charpy Impact Using Statistical Study Based Data Analysis.  - International Journal Of Mechanical And Materials Engineering (ijmme).  6(2): 260-268. 
Jaharah A. Ghani, Muhammad Rizal, Ahmad Sayuti, Mohd Zaki Nuawi, Rizauddin Ramli, Baba Deros, Che Hassan Che Haron.  (2011).  Online Tool Wear Monitoring Using Portable Digital Assistant (pda).  - International Journal Of The Physical Sciences.  6(16):3952-3957. 
T. E. Putra, S. Abdullah, M. Z. Nuawi.  (2011).  Data Scattering Of Fatigue Damaging Segmentation In Order To Develop The Fatigue Damaging And Morlet Wavelet Coefficient Relationship.  - International Review Of Mechanical Engineering.  5(4):605-610. 
Ali, M.b., Abdullah, S., Nuawi, M.z., Ariffin, A.k., Mohammad, M..  (2011).  Evaluating Charpy Impact Signals Using Power Spectrum Densities: A Finite Element Method Approach.  - International Journal Of Mechanical And Materials Engineering.  6(1):92-101. 
Rabbi`atul, N., Norzali, A., Badri, K.h., Nuawi, M.z..  (2011).  Effect Of Aluminum Hydroxide Loading On The Compression Stress And Modulus, Thermal Conductivity And Acoustic Properties Of Palm-based Polyurethane Hybrid Composite.  - Sains Malaysiana.  40(4):379-384. 
Z. Karim, M.z. Nuawi, J.a. Ghani, S. Abdullah And M.j. Ghazali.  (2011).  Optimization Of Integrated Kurtosis-based Algorithm For Z-filter (i-kaz ) Tm Coefficient Using Multi Level Signal Decomposition Technique.  - World Applied Sciences Journal.  14 (10): 1541-1548. 
S. Abdullah, T. E. Putra, M. Z. Nuawi And Z. M. Nopiah.  (2011).  The Use Of Morlet Wavelet Coefficients For Identifying Fatigue Damage Features.  - Pertanika Journal Of Science & Technology.  19(5):107-114. 
S. Abdullah, N. Ismail, M. Z. Nuawi, M. Z. Nopiah & A. Ariffin.  (2010).  Using The Hybrid Kurtosis-based Method To Correlate Strain And Vibration Signals.  - Wseas Transactions On Signal Processing.  6(3):79-90. 
S. Abdullah, T. E. Putra, M. Z. Nuawi, Z. M. Nopiah, A. Arifin And L. Abdullah.  (2010).  The Morlet Wavelet Analysis For Fatigue Feature Clustering.  - Wseas Transactions On Mathematics.  9(5):345-354. 
S. Abdullah, T. E. Putra, M. Z. Nuawi, Z. M. Nopiah, A. Arifin And L. Abdullah.  (2010).  Extracting Fatigue Damage Features Using Stft And Cwt.  - Wseas Transactions On Signal Processing.  6(3):91-100. 
M.z. Nuawi, Taib I. Mohamad, M. F. H. Hussin, S. Abdullah, R. Zulkifli, M.k. Zakaria.  (2010).  Preliminary Study Of Condition-based Monitoring (cbm) On Automotive Gearbox Using Ultrasonic Signals.  - World Applied Sciences Journal.  9(2):118-126. 
T. E. Putra, S. Abdullah, M. Z. Nuawi And Z. M. Nopiah.  (2010).  Wavelet Coefficient Extraction Algorithm For Extracting Fatigue Features In Variable Amplitude Fatigue Loading.  - Journal Of Applied Sciences.  10(4):277-283. 
H. Abdullah, M.n. Norazia, S.shaari, M.z. Nuawi And N.s. Mohamed Dan.  (2010).  Low-doping Effects Of Nanostructure Zno: Sn Tin Films Annealed At Different Temperature In Nitrogen Ambient To Be Applied As An Anti-reflecting Coating (arc).  - American J. Of Engineering And Applied Sciences.  3(1):171-179. 
A.r. Ismail, M. Z. Nuawi, N.f. Kamaruddin And R.a. Bakar.  (2010).  Comparative Assessment Of The Whole-body Vibration Exposure Under Different Car Speed Based On Malaysian Road Profile.  - Journal Of Applied Science.  10(14):1428-1434. 
A.r. Ismail, M.z. Nuawi, C.w. How, N.f. Kamaruddin, M.j.m. Nor And N.k. Makhtar.  (2010).  Whole Body Vibration Exposure To Train Passenger.  - American Journal Of Applied Sciences.  7(3):352-359. 
Abdullah S., Nizwan C.k.e., Nuawi M.z..  (2009).  A Study Of Fatigue Data Editing Using The Short-time Fourier Transform (stft).  - American Journal Of Applied Sciences.  6(4):565-575. 
A. G. Jaharah, C. H. Che Hassan, M. J. Ghazali, A. B. Sulong, M. Z. Omar, M. Z.nuawi, A. R. Ismail.  (2009).  Performance Of Uncoated Carbide Cutting Tool When Machining Cast Iron In Dry Cutting Condition.  - International Journal Of Modern Physics B.  23(6-7):1796-1802. 
Rozli Zulkifli, Mohd Jailani Mohd Nor, Ahmad Rasdan Ismail, Mohd Zaki Nuawi, Mohd Faizal Mat Tahir.  (2009).  Effect Of Perforated Size And Air Gap Thickness On Acoustic Properties Of Coir Fibre Sound Absorption Panels.  - European Journal Of Scientific Research.  28(2):242-252. 
N. I. I. Mansor, M. J. Ghazali, M. Z. Nuawi And S. E. M. Kamal.  (2009).  Monitoring Bearing Condition Using Airborne Sound.  - International Journal On Mechanical And Materials Engineering.  4(2):152-155. 
Mj Ghazali, Mz Nuawi, Nii Mansor.  (2009).  Low Cost Wear Monitoring Of Bearing Shell In Connecting Rod Via I-kaz Method.  - Advanced Materials Research.  76-78:702-707. 
Jaharah A.g, Wahid S.w, Che Hassan C.h, Nuawi M.z, Mohd Nizam Ab Rahman.  (2009).  The Effect Of Uncoated Carbide Tool Geometries In Turning Aisi 1045 Using Finite Element Analysis.  - European Journal Of Scientific Research.  28(2):271-277. 
Zulkifli R., Nor M.j.m., Ismail A.r., Nuawi M.z., Abdullah S., Tahir M.f.m., Rahman M.n.a..  (2009).  Comparison Of Acoustic Properties Between Coir Fibre And Oil Palm Fibre.  - European Journal Of Scientific Research.  33(1):144-152. 
R. Zulkifli, M.j. Mohd Nor, M.f. Mat Tahir, A.r. Ismail And M. Z. Nuawi.  (2008).  Acoustic Properties Of Multi-layer Coir Fibres Sound Absorption Panel.  - Journal Of Applied Sciences.  8(20):3709-3714. 
A.r.ismail, M.r.a.mansor, M.j.m.nor, M.z.nuawi, R. Zulkifli, M. N. Ab. Rahman And K. Sopian.  (2008).  Comparative Studies And Impact Analysis Of Environmental Noise Modeling From Malaysian Industrial Projects.  - Wseas Transactions On Environment And Development.  4(8):666-675. 
M. Z. Nuawi, S. Abdullah, A. R. Ismail, R. Zulkifli, M. K. Zakaria And M. F. H. Hussin.  (2008).  A Study On Ultrasonic Signals Processing Generated From Automobile Engine Block Using Statistical Analysis.  - Wseas Transactions On Signal Processing.  4(5):279-288. 
M.z. Nuawi, M.j.m. Nor, N. Jamaludin, S. Abdullah, F. Lamin And C.k.e. Nizwan.  (2008).  Development Of Integrated Kurtosis-based Algorithm For Z-filter Technique.  - Journal Of Applied Sciences.  8(8):1541-1547. 

Prosiding Terindeks

Mnfm Kazim, Mrm Rasani, A A Abd Rahman, M Z Nuawi, Z Harun And Nam Amin.  (2019).  Triangular Separation Distance Effects On Wave Electrical Energy Harvester Performance.  - 5th International Conference On Man Machine Systems.  20-23. 
M. Mohammad, N.i.r. Nik Syukri And M.z. Nuawi.  (2019).  Sound Properties Investigation Of Date Palm Fiber.  - Journal Of Physics: Conference Series (8th International Conference On Mechanical And Manufacturing Engineering, Icme 2018).  1-6. 
Ramli M.i., Nuawi M.z., Abdullah S., Rasani M.r.m., Seng K.k., Ahmad M.a.f..  (2016).  Development On Simulation Of Small Structure Modal Analysis Method Using Piezoelectric Film Sensor.  - Icsv 2016 - 23rd International Congress On Sound And Vibration: From Ancient To Modern Acoustics. 
Mohamed Abed Alabas Siba, Wan Mohd Faizal Wan Mahmood, Mohd Zaki Nuawi, Rasidi Rasani, Mohamed Nassir.  (2016).  Investigation Of Physical And Mechanical Properties Of 3-d Turbulent Flow In Orifice Pipe.  - Applied Mechanics And Materials.  330-334. 
Mohammad Rasidi Rasani, Mohd. Zaki Nuawi, Wan Mohd Faizal Wan Mahmood, Zambri Harun..  (2016).  A Computational Study On Effect Of Pitch Difference In Pure Plunging Tandem Wings..  - Innovation In Aerospace Engineering And Technology.  1-10. 
Rizal, M., Ghani, J.a., Nuawi, M.z., Haron, C.h.c..  (2016).  A Triaxial Cutting Force Measurement Utilizing An Embedded Transducer On A Spindle Rotating Tool.  - 9th International Conference On Sensing Technology, Icst 2015; Auckland; New Zealand.  289-294. 
M.a.f. Ahmad, M.z. Nuawi, S. Abdullah, Z. Wahid, Z. Karim, M. Dirhamsyah.  (2015).  Development Of Tool Wear Machining Monitoring Using Novel Statistical Analysis Method, I-kaztm.  - 3rd International Conference On Material And Component Performance Under Variable Amplitude Loading,. 
Elwaleed Awad Khidir, Nik Abdullah Nik Mohamed, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir And Mohd Zaki Nuawi.  (2014).  A Preliminary Study On The Sound Absorption Of Self-facing Date Palm Fibers.  - Applied Mechanics And Materials / Trans Tech Publications, Switzerland. 
Mohd Anas Mohd Sabri, Mohd Zaki Nuawi, Mohd Faizal Mat Tahir, Shahrum Abdullah, Abdul Rahim Bahari And Firdaus Mohamad Hamzah.  (2014).  Monitoring System Of Fuel Injector Using Piezoelectric Sensors, Applied Mechanics And Materials.  - Applied Mechanics And Materials.  223-228. 
Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, And Che Hassan Che Haron1,.  (2014).  I-kaztm-based Analysis Of Cutting Force Signals For Tool Condition.  - Applied Mechanics And Materials / Trans Tech Publications, Switzerland. 
Elwaleed Awad Khidir, Nik Abdullah Nik Mohamed, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, Rozli Zulkifli, Mohd Zaki Nuawi.  (2014).  Effect Of Density On The Sound Absorption Of Date Palm Fibers.  - Applied Mechanics And Materials.  437-441. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Dian Darina Indah Daruis.  (2014).  Study Of Noise, Vibration And Harshness (nvh) For Malaysian Army (ma) 3-tonne Trucks.  - Applied Mechanics And Materials.  74-80. 
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor, Dian Darina Indah Daruis And Abdul Rahim Bahari.  (2014).  Correlation Between Whole Body Vibration Exposure And I-kaztm 3d Coefficient For Malaysian Army 3-tonne Truck Drivers.  - Applied Mechanics And Materials.  156-160. 
Nor Kamaliana Khamis, Baba Md Deros, Mohd Zaki Nuawi And Rabiatul Basariah Omar.  (2014).  Driving Fatigue Among Long Distance Heavy Vehicle Drivers In Klang Valley Malaysia.  - Applied Mechanics And Materials.  567-573. 
N.k. Khamis, B.m., Deros And M.z, Nuawi.  (2014).  A Preliminary Study On Motorcyclists Perceptions Of Fatigue Risk Factors.  - Applied Mechanics And Materials. 
Syarifah N. Deraman, Valliyappan D. Natarajan, Mohd Jailani Mohd Nor Dan Mohd Zaki Nuawi.  (2014).  Efficacy Study Of Embedded Binaural Beats In Gamma Brainwave Synchronization.  - Iasted International Conference Biomedical Engineering (biomed 2014). 
Muhammad Rizala, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron.  (2013).  The Application Of I-kaztm-based Method For Tool Wear Monitoring Using Cutting Force Signal.  - Procedia Engineering -the Malaysian International Tribology Conference 2013 (mitc2013). 
M.z. Nuawi, A.r. Bahari, S. Abdullah, A.k. Ariffin, Z.m. Nopiah.  (2013).  Time Domain Analysis Method Of The Impulse Vibro-acoustic Signal For Fatigue Strength Characterisation Of Metallic Material.  - Procedia Engineering - International Conference Proceedings Fatigue Design 2013. 
Mohammed A.a., Haris S.m., Nuawi M.z..  (2013).  A Smart Way To Increase The Frequency And Degree Of Protection Of Piezoelectric Ceramic Transducers.  - Proceeding - 2013 Ieee Student Conference On Research And Development, Scored 2013.  43-47. 
Mohammad, M., Abdullah, S., Jamaludin, N., Nuawi, M.z..  (2012).  Correlating Strain And Acoustic Emission Signals Of Metallic Component Using Global Signal Statistical Approach.  - 14th International Conference On Advances In Materials And Processing Technologies, Ampt 2011;istanbul (advanced Materials Research). 
Bahari, A.r., Nuawi, M.z., Abdullah, S., Ihsan, A.k.a.m., Ali, M.b..  (2012).  Characterisation Of The Sound And Vibration Signal Of Impact Testing On Automotive Component Materials.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 
Yunoh, Mfm; Abdullah, S; Nopiah, Zm; Nuawi, Mz; Ismail, N.  (2012).  Fatigue Feature Classification For Automotive Strain Data.  - 1st International Conference On Mechanical Engineering Research 2011 (icmer); Kuantan (iop Conference Series-materials Science And Engineering). 
Azali Awaludin, Mohd Zaki Nuawi, Yusoff Ali, Wan Mohd Faizal W.m And Taib Iskandar Mohamad.  (2012).  A Study On Alternative Fuel Blending For Homogeneous Charge Compression Ignition (hcci) Engine Using Palm Oil Methyl Ester And Ron 97.  - Regional Conference On Automotive Research (recar) 2011; (applied Mechanics And Materials). 
Z. Karim, M.z. Nuawi, J.a. Ghani, S. Abdullah And M.j. Ghazali.  (2012).  Wear Monitoring Of Connecting Rod Bearing Via Air-borne Method Analyzed By Using I-kaz Tm Multi Level Value.  - 14th International Conference On Advances In Materials And Processing Technologies, Ampt 2011;istanbul (advanced Materials Research). 
Ali, M.b., Abdullah, S., Nuawi, M.z., Ariffin, A.k..  (2012).  Investigation Of Energy Absorbed From An Instrumented Charpy Impact On Automotive Specimens.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 
Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi.  (2012).  Performance Evaluation And Compression Of Some Actuators And Sensors Piezoelectric Elements.  - 2012 International Symposium On Instrumentation And Measurement, Sensor Network And Automation, Imsna 2012, Sanya, China. 
Mohamad Zairi Baharom, Mohd Zaki Nuawi, Gigih Priyandoko, Sallehuddin Mohamed Harris.  (2012).  Eddy Current Braking Experiment Using Brake Disc From Aluminium Series Of Al6061 And Al7075.  - 1st International Conference On Mechanical Engineering Research 2011 (icmer); Kuantan (iop Conference Series: Materials Science And Engineering). 
Abdullah S., Sahadan S.n., Nuawi M.z., Nopiah Z.m..  (2011).  Fatigue Data Analysis Using Continuous Wavelet Transform And Discrete Wavelet Transform.  - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur (key Engineering Materials). 
Ali M.b., Abdullah S., Nuawi M.z., Padzi M.m., Zakaria K.a..  (2011).  Experimental Analysis Of An Instrumented Charpy Impact Using Signal Processing Approach.  - 2nd International Conference On Manufacturing Science And Engineering, Icmse 2011; Guilin; 9 April 2011 Through 11 April 2011; Code 84140 (advanced Materials Research). 
S. Abdullah, M. B. Ali, M. Z. Nuawi, Z. M. Nopiah And A. K. Ariffin.  (2011).  Evaluating Charpy Impact Signals With Different Frequencies Using Power Spectrum Densities.  - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen(advanced Materials Research). 
Ismail N., Abdullah S., Nuawi M.z., Nopiah Z.m., Lennie A..  (2011).  Durability Analysis Of An Automobile Coil Spring Using Hybrid I-kaz.  - Source: Fracture And Strength Of Solids Vii, Pts 1 And 2 Book Series: Key Engineering Materials. 
Sallehuddin Mohamed Haris, Muhammad Khalid Zakaria And Mohd Zaki Nuawi.  (2011).  Depth Estimation From Monocular Vision Using Image Edge Complexity.  - 2011 Ieee/asme International Conference On Advanced Intelligent Mechatronics (aim2011);budapest. 
Nuawi, Mz; Bahari, Ar; Abdullah, S.  (2011).  Impact Test On Steel Structures - An Experimental Investigation.  - 2010 International Conference On Advances In Materials And Manufacturing Processes, Icammp 2010; Shenzhen Source: Advances In Superalloys, Pts 1 And 2 Book Series: (advanced Materials Research). 
K.a.zakaria, S. Abdullah, M.j. Ghazali, M.z.nuawi, M.m.padzi.  (2011).  Fatigue Damage Assessment Of The Engine Mount Bracket Using A Statistical Based Approach.  - 2nd International Conference On Manufacturing Science And Engineering, Icmse 2011; Guilin (advanced Materials Research). 
Ali, Mb; Abdullah, S; Nuawi, Mz; Ariffin, Ak.  (2011).  Analysis Of An Instrumented Charpy Impact Using Power Spectrum Density.  - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur(key Engineering Materials). 
Ali, M.b., Abdullah, S., Nuawi, M.z., Ariffin, A.k..  (2011).  Test Simulation Using Finite Element Method.  - Conference On Advanced Materials And Nanotechnology, Caman 2009; Kuala Lumpur (iop Conference Series: Materials Science And Engineering). 
Shahrum, A., Teuku, E.p., Mohd, Z.n., Zulkifli, M.n..  (2011).  Vibrational Fatigue Analysis Of A Strain Loading Using The Frequency And Wavelet Filtering Methods.  - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur (key Engineering Materials). 
Lennie, A., Nopiah, Z.m., Abdullah, S., Baharin, M.n., Nuawi, M.z., Arifin, A..  (2011).  Variable Amplitude Loading Strains Data Distribution Using Probability Density Function And Power Spectral Density.  - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur (key Engineering Materials). 
Abdullah S., Ismail N., Nuawi M.z., Nizwan C.k.e., Abdullah M.f..  (2011).  Comparative Study Of The Strain Signal And The Edited Strain Signal.  - International Conference On Advances In Materials And Processing Technologies, Ampt 2009(advanced Materials Research). 
Jaharah A. Ghani, Mohd Nor Azmi Mohd Rodzi, Mohd Zaki Nuawi,kamal Othman, Mohd. Nizam Ab. Rahman, Che Hassan Che Haron, And Baba Md Deros.  (2010).  Application Of Taguchi Method For Analyzing Factors Affecting The Performance Of Coated Carbide Tool When Turning Fcd700 In Dry Cutting Condition.  - Aip Conference Proceedings - International Conference On Advances In Materials And Processing Technologies. Vol. 1315. 
Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, Rizauddin Ramli.  (2010).  Statistical Analysis For Detection Cutting Tool Wear Based On Regression Model.  - Proceedings Of The International Multiconference Of Engineers And Computer Scientists Imecs 2010. 
Abdullah, S; Putra, Te; Nuawi, Mz; Nopiah, Zm; Arifin, A; Lennie, A.  (2010).  Using Monet Wavelet Coefficients To Cluster Variable Amplitude Fatigue Features.  - 5th Iasme/wseas International Conference On Continuum Mechanics/7th Wseas International Conference On Fluid Mechanics/7th Wseas International Conference On Heat And Mass Transfer Univ Cambridge. 
Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, Mariyam Jameelah Ghazali, And Mohd Nizam Ab Rahman.  (2010).  Online Cutting Tool Wear Monitoring Using I-kaz Method And New Regression Model.  - Advanced Materials Research. 
Abdullah, S; Putra, Te; Nuawi, Mz; Nopiah, Zm; Arifin, A; Abdullah, L.  (2010).  Time-frequency Localisation Analysis For Extracting Fatigue Damaging Events.  - Ispra '09: Proceedings Of The 9th Wseas International Conference On Signal Processing, Robotics And Automation. 
M. M. Padz, S. Abdullah, Z. Nuawi.  (2010).  A Statistical Based Analysis Approach On Fatigue Failure Assessment Of Carbon Steel.  - International Conference On The Advancement Of Material And Nano Technology (applied Mechanics And Materials). 
Abdullah S, Ismail N, Nuawi Mz, Nopiah Mz, Arifin A.  (2010).  Study On Correlation Between Strain And Vibration Signal Using Hybrid I-kaz Method.  - 5th Iasme/wseas International Conference On Continuum Mechanics/7th Wseas International Conference On Fluid Mechanics/7th Wseas International Conference On Heat And Mass Transfer Univ Cambridge. 
Ahmad Rasdan Ismail, Mohd Jailani Mohd Nor, Mohd Faizal Mat Tahir, Mohd Radzi Abu Mansor, Mohd Zaki Nuawi.  (2009).  Comparative Study Of Noise Exposure To Residental Area At Malaysia.  - 16th International Congress On Sound And Vibration 2009, Icsv 2009;krakow. 

Buku Penyelidikan

Muhammad Imran Sadiq, Wan Aizon Wan Ghopa, Mohd Zaki Nuawi, Mohammad Rasidi Mohammad Rasani & Tajammal Imran.  (2022).  Structural Integrity Cases In Mechanical And Civil Engineering.  - 13. 
Lennie Abdullah, Zulkifli Mohd Nopiah, Mohd Zaki Nuawi.  (2021).  Lesu Pengecaman Dan Penyelesaian Dalam Automotif.  - 213. 
Ab. Samad Kechot, Mohamed Anwar Omar Din, Azhar Abdul Latif, Huda Abdullah & Mohd Zaki Nuawi.  (2016).  Teknologi Di Alam Melayu.  - Bab 1 : 23 - 34. 
Abdul Samad Kechot, Daeng Haliza Daeng Jamal, Huda Abdullah & Mohd Zaki Nuawi.  (2015).  Ensiklopedia Kejuruteraan Alam Melayu.  - 211-215. 
Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hasan Che Haron, And Rizauddin Ramlia.  (2010).  Iaeng Transactions On Engineering Technologies Volume 5.  - 249-260. 

Bab Dalam Buku

Muhammad Imran Sadiq, Wan Aizon Wan Ghopa, Mohd Zaki Nuawi, Mohammad Rasidi Mohammad Rasani & Tajammal Imran.  (2022).  Structural Integrity Cases In Mechanical And Civil Engineering.  - 13. 
Ab. Samad Kechot, Mohamed Anwar Omar Din, Azhar Abdul Latiff, Huda Abdullah & Mohd Zaki Nuawi.  (2016).  Teknologi Di Alam Melayu.  - 11. 
Ab. Samad Kechot, Mohamed Anwar Omar Din, Azhar Abdul Latif, Huda Abdullah & Mohd Zaki Nuawi.  (2016).  Teknologi Di Alam Melayu.  - Bab 1 : 23 - 34. 
Abdul Samad Kechot, Daeng Haliza Daeng Jamal, Huda Abdullah & Mohd Zaki Nuawi.  (2015).  Ensiklopedia Kejuruteraan Alam Melayu.  - 211-215. 
Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hasan Che Haron, And Rizauddin Ramlia.  (2010).  Iaeng Transactions On Engineering Technologies Volume 5.  - 249-260. 

Penulisan Dalam Bahasa Melayu

Lennie Abdullah, Zulkifli Mohd Nopiah, Mohd Zaki Nuawi.  (2021).  Lesu Pengecaman Dan Penyelesaian Dalam Automotif.  - 213. 
Mohd Zaki Nuawi, Shahrum Abdullah, Shahrir Abdullah, S.m Haris, Azli Arifin.  (2009).  Matlab: A Comprehensive Reference For Engineers.  - 210. 

Penerbitan Lain-lain

Mohd Faizal Bin Mat Tahir;rozli Bin Zulkifli;mohd. Zaki Bin Nuawi;nor Kamaliana Binti Khamis.  (2023).  Studies On Acoustics Properties Of Local Wood Material Use In Traditional Malaysian House.  -
M.a.i. Syauqi, M.i.m Ahmad, N.s. Suhaimi, M.z.nuawi, Z.m. Hafizi, A.k. Ariffin, A.z.m. Abdullah.  (2022).  Strain-stress Behaviour Investigation On Railway Track Based On The Fbg Wavelength Shifting: Rectangular Rosette Configuration.  - 6th International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar) 2022.  1-14. 
N.s. Suhaimi, M.i.m. Ahmad, M.z.nuawi, Z.m. Hafizi, A.k. Ariffin, A.z.m. Abdullah.  (2022).  Determination Of Train Vehicle Speed Using Fibre Bragg Grating Sensors For Railway Application.  - 6th International Conference On Recent Advances In Automotive Engineering & Mobility Research, Recar 2022.  1-12. 
Nur Shufinah Suhaimi, Meor Iqram Meor Ahmad, Mohd Zaki Nuawi, Mohd Hafizi Zohari, Zainuddin Sajuri, Aidie Zeid Muhammad Abdullah.  (2022).  The Effect Of Railways Speed On The Rail Track Structure Strain Behaviour Using Fibre Optical Sensor.  - 5th International Conference On Automotive Innovation And Green Energy Vehicle (aigev) 2022.  1-15. 
Hoo Rui Wen, Mohd Faizal Mat Tahir, Azli Ariffin, Mohd Rasidi Mohd Rasani, Mohd Zaki Nuawi.  (2022).  The Traffic Noise Level Assessment In Selected Schools Areas Near Main Roads In Bandar Baru Bangi District, Selangor.  - 6th International Conference On Recent Advances In Automotive Engineering & Mobility Research.  1-22. 
A.d.h. Agosmustaram, M.i.m. Ahmad, N.s. Suhaimi, M.z.nuawi, Z.m. Hafizi, A.k. Ariffin, A.z.m. Abdullah.  (2022).  Monitoring For Strain-based Railway Structure Assessment Approach Using Optical Fiber Sensor.  - 6th International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar) 2022.  1-12. 
Che Hassan Bin Che Haron;jaharah Bt. A Ghani;mohd. Zaki Bin Nuawi;wan Fathul Hakim Bin W. Zamri.  (2021).  Cryogenic Machining Of Inconnel Alloys Using Carbide Cutting Tool For Sustainable Manufacturing Process.  -
Mohd Zaki Nuawi Muhammad Arif Fadli Ahmad Suziana Mat Saad.  (2021).  Identifiying The Malay's Traditional Musical Instruments Using Acoustic Signal.  - Svam.  1-8. 
Salman Aslam Ramdan, Mohammad Rasidi Rasani, Thinesh Subramaniam, Ahmad Sobri Muda, Ahmad Fazli Abdul Aziz, Tuan Mohammad Yusoff Shah Tuan Ya, Hazim Moria, Mohd Faizal Mat Tahir, Mohd Zaki Nuawi.  (2021).  Blood Flow Acoustics In Carotid Artery Under Varying Degrees Of Stenosis.  - The 3rd International Conference On Thermal Sciences And Fluid Flow (ictsff) 2021.  1-18. 
Meor Iqram Meor Ahmad, Nur Shufinah Suhaimi, Mohd Zaki Nuawi, Ahmad Kamal Ariffin, Nordin Jamaludin And Azam Abdullah.  (2021).  A Review On Modes Of Failure Of Rail Tracks Structure In Railway Transportation..  - Virtual Conference Computational And Experimental Mechanics 2021.  1-19. 
Mohd. Zaki Bin Nuawi;suziana Bt. Mat Saad;ab. Samad Bin Kechot.  (2019).  Metodologi Pembangunan Pengkalan Data Akustik Alat Muzik Tradisional Melayu.  -
Mohd. Zaki Bin Nuawi;jaharah Bt. A Ghani;shahrum Bin Abdullah;zulkifli Bin Mohd Nopiah;zaliha Binti Wahid.  (2019).  Pembangunan Sistem Pemantauan Haus Mata Alat Menggunakan Pelbagai Jenis Sensor Dalam Proses Lirik.  -
Mohd. Zaki Nuawi, Mohd Shukry Abdul Majid, Nawal Aswan Abdul Jalil, Sallehuddin Ohamed Haris, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani.  (2019).  Enhancing The Material Properties Characteristics Study By Monitoring The Mechanical Structure Based On Non-conventional Modal Analysis.  - 1-5. 
Azli Bin Arifin;nordin Bin Jamaludin;ahmad Kamal Ariffin Bin Mohd Ihsan;shahrum Bin Abdullah;mohd. Zaki Bin Nuawi.  (2018).  Quantitative Study Of Self-magnetic Flux Leakage Towards The Failure Analysis For Ferromagnetic Components.  -
N. N. M. Nasir, S. Abdullah, S. S. K. Singh, M.f. Yunoh, M. Z. Nuawi, S. M. Haris.  (2017).  Time-frequency Strain Data Analysis Of Suspension Using The Hilbert-huang Transform.  - International Conference On Recent Advances In Automotive Engineering & Mobility Research Recar 2017. 
Airee Afiq Abd Rahim, Shahrum Abdullah, Salvinder Singh Karam Singh, Mohd Zaki Nuawi.  (2017).  Relationship Between Time Domain And Frequency Domain Strain Signal-application To Real Data.  - 5th International Conference On Advances In Mechanical Engineering. 
N. Abdullah, M. A. M. Razali, M. H. O. Ahmad, M. Z. Nuawi, M. M. Mustafa, Z. M. Nopiah, A. Mohamed, A. B. Mohamad.  (2016).  Neural Network Adaptive Real-time Optimizing Control Of Industrial Processes.  - International Conference Of Chemical Engineering & Industrial Biotechnology (icceib 2016). 
Sallehuddin Bin Mohamed Haris, Mohd. Zaki Bin Nuawi, Rizauddin Bin Ramli.  (2015).  Development Of A Multiple Adaptive Control Design Framework Using Algebraic Polynomial Spectral Factorization For Vehicles Under Variable Loading Conditions.  -
Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, M. Z. Nuawi, Rasidi Rasani, Mohamed H. Nassir, And Nabeh N. Al Deroubi.  (2015).  Effect Of Induced Vibration On Flow Through A Pipe With Orifice.  - 5th International Conference On Noise, Vibration And Comfort (nvc 2015). 
Shahrum Bin Abdullah, Nordin Bin Jamaludin, Mohd. Zaki Bin Nuawi, Zulkifli Bin Mohd Nopiah, Azli Bin Arifin.  (2015).  Investigation Study To Predict Fatigue Failur Using Acoustic Emission Characteristics For Metallic Components.  -
Mohd. Zaidi Bin Omar, Azman Bin Jalar @ Jalil, Sallehuddin Bin Mohamed Haris, Mohd. Zaki Bin Nuawi, Shahrum Bin Abdullah.  (2014).  Development Of Suspension System For Heavy Vehicles.  -
Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor And Dian Darina Indah Daruis.  (2014).  Noise Monitoring Inside Malaysian Army 3-tonne Truck Cabin Using Statistical Analysis.  - 11th International Congress On Noise As A Public Health Problem (icben 2014). 
Mohamad Hanif Md Saad, Muhammad Zaki Nuawi.  (2013).  Applied Instrumentation & Measurement For Mechanicalengineering Students.  -
Nor Kamaliana Khamis, Baba Md Deros, Mohd Zaki Nuawi.  (2012).  Understanding The Effect Of Discomfort Level Towards Motorcycle Riders Among Teenagers : A Preliminary Study.  - International Conference On Noise, Vibration And Comfort 2012. 
Ab Samad Kechot, Mohd Zaki Nauwi & Huda Abdullah.  (2012).  Rebab : Domumentasi Dan Pembangunan Teknologi.  - Pemetaan Produk Seni Buda. 
Y. Istihat, M. Z. Nuawi, A. R. Bahari And W. M. F. W. Mahmood.  (2011).  Development Of Ultrasonic Test Rig System For Fuel Injector.  - Regional Conference On Automotive Research (recar) 2011. 
Z. M. Nopiah, A. Lennie, S. Abdullah, M. Z. Nuawi, A. Z. Nuryazmin
and M. N. Baharin.  (2011).  A Study On Lower Suspension Arm Fatigue Data Behaviour By Using Cycle Count Methods.  - Regional Conference On Automotive Research (recar) 2011. 
A.r. Ismail, M.h.m. Haniff, B.m., M.n.a. Rahman, M.z. Nuawi, M.r.a. Rani.  (2010).  The Influence Of Sound Pressure Level Towards Workers` Production Rate.  - The 3rd Regional Conference On Noise, Vibration And Comfort. 
N. I. I. Mansor, M. J. Ghazali And M. Z. Nuawi.  (2010).  An Investigation Of Sliding Wear Bearing Using Airborne Technique.  - 3rd Regional Conference On Noise, Vibration And Comfort (nvc ) 2010. 
Jaharah A.g., Che Hassan, Ghazali M.j.,md.deros B., M.z. Nuawi, M.z..  (2008).  Performance Of Uncoated Carbide Tool When Machining Cast Iron In Dry Condition.  - 5 Th International Conference On Advanced Mateerial And Processing, Harbin, China, 2-5 Sep 2008. 
PROJEK PENYELIDIKAN / RESEARCH PROJECT
(Tajuk),(Peranan),(Tempoh),(Tahap)

Aktif

Flow-INDuced Energy harvesteR ("FINDER") – Uncertainty and robustness modelling of energy harvester towards a working prototype , Penyelidik Bersama , 01-10-2022 sehingga 30-09-2024 , Universiti
Physical characteristics of vegetable plants in urban farming on their acoustics property attributes for nature sound wall application. , Penyelidik Bersama , 01-09-2022 sehingga 31-08-2024 , Kebangsaan
Pembangunan Modul Penilaian Pintar Pemantapan Sebutan Bahasa Perancis dalam kalangan Pelajar Malaysia berasaskan Pembelajaran Mesin , Penyelidik Bersama , 07-09-2021 sehingga 06-09-2023 , Kebangsaan
Enhancement of Neo-MoMac Systems: Hardware and Software Improvement for Real Time Monitoring Process in IR 4.0 Environment , Penyelidik Bersama , 01-12-2020 sehingga 31-05-2023 , Kebangsaan
A Hybrid Numerical Scheme for Efficient Assessment and Optimization of the Acoustic Characteristics , Penyelidik Bersama , 01-11-2020 sehingga 30-04-2024 , Kebangsaan
Embedded Machine Learning-Based with Continuum Damage Model for Railway Running Rail (RRR) using Optical Strain Measurement , Penyelidik Bersama , 01-11-2020 sehingga 30-04-2023 , Kebangsaan

Tamat

Eel Structure Piezoelectric Energy Harvester Study using Fluid-Structure Interaction Simulation on Newly Developed Quantum Computing System , Ketua Projek , 01-09-2019 sehingga 30-11-2022 , Kebangsaan
Enhancing the Material Properties Characteristics Study by Monitoring the Mechanical Structure Based on Non-Conventional Modal Analysis , Ketua Projek , 01-08-2016 sehingga 31-07-2018 , Kebangsaan
Pembangunan Sistem Pemantauan Haus Mata Alat Menggunakan Pelbagai Jenis Sensor dalam Proses Lirik , Ketua Projek , 01-12-2013 sehingga 30-11-2015 , Universiti
Metodologi Pembangunan Pengkalan Data Akustik Alat Muzik Tradisional Melayu , Ketua Projek , 01-12-2013 sehingga 30-11-2014 , Universiti
MATERIALS PROPERTIES DETERMINATION USING A NOVEL IMPULSIVE EXCITATION SIGNAL ANALYSIS , Ketua Projek , 20-05-2013 sehingga 19-05-2016 , Kebangsaan
DEVELOPMENT OF A NATURAL FIBER FIBER SELF-PERFORATED FACING SOUND ABSORPTION PANEL , Ketua Projek , 20-05-2013 sehingga 19-05-2015 , Kebangsaan
Novel Statistical Analysis for Occupational Vibration-Quantitative and Qualitative Study , Ketua Projek , 02-05-2012 sehingga 31-10-2013 , Universiti
Novel Signal Analysis For Characterization of Mechanical Properties of Material , Ketua Projek , 02-05-2012 sehingga 31-10-2013 , Universiti
Novel Signal Analysis for Characterisation of Compressed Natural Gas (CNG) Injection System , Ketua Projek , 01-11-2009 sehingga 30-04-2012 , Kebangsaan
Optimisation of Vibro-Acoustics and Fuel Efficiency Performance of An Automotive System , Ketua Projek , 01-06-2008 sehingga 31-05-2011 , Universiti
Pembangunan Algoritma Pemprosesan Isyarat untuk Pemesinan (Algorithm development for dynamic signal processing of machining) , Ketua Projek , 01-10-2007 sehingga 31-12-2010 , Universiti
Development Of High Frequency Vibro-Acoustic Sensor System For Automotive Engine Performance Monitoring , Ketua Projek , 01-12-2006 sehingga 30-11-2008 , Kebangsaan
Studies on Acoustics Properties of Local Wood Material Use in Traditional Malaysian House , Penyelidik Bersama , 01-10-2019 sehingga 30-09-2022 , Universiti
Formulation of a real-time strain-acceleration response under a big data characteristics for a new durability criterion , Penyelidik Bersama , 01-09-2019 sehingga 30-11-2022 , Kebangsaan
Effect of stenosis and wall-hardening on carotid artery acoustics - A computational multiphysics study using realistic model. , Penyelidik Bersama , 01-01-2019 sehingga 30-09-2022 , Kebangsaan
Cryogenic machining of inconnel alloys using carbide cutting tool for sustainable manufacturing process , Penyelidik Bersama , 16-10-2017 sehingga 15-07-2020 , Universiti
Development of Real time cutting tool wear monitoring NeoMo-Mac , Penyelidik Bersama , 01-07-2015 sehingga 31-12-2017 , Kebangsaan
Modelling And Optimising Engineering Problem Through Mathematical Analysis , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti
Sistem Kenderaan Lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti
Determining the fatigue micro-crack behavior associated to magnetic flux leakage of ferrous-based materials under bi-axial loadings , Penyelidik Bersama , 01-06-2015 sehingga 30-11-2017 , Kebangsaan
Driving Fatigue Index (DFI) as an Indicator for Determining Driver Discomfort , Penyelidik Bersama , 01-12-2014 sehingga 31-05-2017 , Kebangsaan
Cutting tool performance and surface integrity of Titanium alloys under sustainable machining process , Penyelidik Bersama , 01-08-2014 sehingga 30-04-2017 , Universiti
Structural Health Monitoring of Concrete-Filled Steel Tube (CFST) Column Using Lamb Wave , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Universiti
Sistem Kenderaan lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
Modelling and Optimising Engineering Problems Through Mathematical Analysis , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
A Study on the Ignition and Combustion Characteristics of Biodiesel Oil in A Constant Volume Vessel , Penyelidik Bersama , 16-12-2013 sehingga 31-05-2017 , Kebangsaan
A decomposition-based hybrid evolutionary algorithms and geographical information system in multi criteria renewable energy power system design , Penyelidik Bersama , 16-12-2013 sehingga 15-06-2016 , Kebangsaan
SMART ONLINE TOOL WEAR MONITORING IN SUSTAINABLE MACHINING ENVIRONMENT , Penyelidik Bersama , 01-11-2013 sehingga 31-10-2016 , Universiti
EXPLORATORY OPTIMISATION METHODS FOR SET-POINT CONTROL USING NEURAL NETWORK MODELS , Penyelidik Bersama , 20-05-2013 sehingga 18-11-2016 , Kebangsaan
MODELLING AND OPTIMISING ENGINEERING BASED PROBLEMS BY MATHEMATICAL ANALYSIS , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
SISTEM KENDERAAN BERKECEKAPAN BAHAN API OPTIMUM , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
Real Time Cutting Tool Wear Monitoring - Neo-MoMac , Penyelidik Bersama , 01-10-2012 sehingga 21-11-2013 , Universiti
DEVELOPMENT OF REAL TIME MONITORING MACHINING CONDITION USING WIRELESS SYSTEM FOR ROTATING SPINDLE , Penyelidik Bersama , 01-09-2012 sehingga 31-01-2015 , Kebangsaan
Development of Suspension System for Heavy Vehicles , Penyelidik Bersama , 25-06-2012 sehingga 24-06-2014 , Universiti
Development of A Multiple Adaptive Control Design Framework using Algebraic Polynomial Spectral Factorization for Vehicles Under Variable Loading Conditions , Penyelidik Bersama , 01-06-2012 sehingga 31-05-2015 , Kebangsaan
Investigation Study to Predict Fatigue Failur using Acoustic Emission Characteristics for Metallic Components , Penyelidik Bersama , 04-04-2012 sehingga 03-04-2015 , Kebangsaan
Quantitative Study of Self-Magnetic Flux Leakage towards the Failure Analysis for Ferromagnetic Components , Penyelidik Bersama , 04-04-2012 sehingga 03-10-2014 , Kebangsaan
Modelling of Monitoring Machining Condition Based on Expert System Using Wireless Pizzo Sensor System , Penyelidik Bersama , 08-08-2011 sehingga 08-02-2013 , Universiti
Development of Signal Processing-Based Fatigue Failure Index (FPI) fot Automonile Components , Penyelidik Bersama , 08-08-2011 sehingga 07-08-2012 , Universiti
Alat Muzik Melayu Tradisional: Eksplorasi Pembangunan Seni Budaya dalam Genre Muzik Kontemporari , Penyelidik Bersama , 21-06-2011 sehingga 20-12-2014 , Kebangsaan
Pengukuran Hasil Pembelajaran Menggunakan Model Rasch bagi Kursus Asas Jabatan di FKAB , Penyelidik Bersama , 01-04-2011 sehingga 30-06-2012 , Universiti
Development of Fatigue Failure Classification Index using Statical-Based Pattern Recognition Parameters , Penyelidik Bersama , 15-03-2010 sehingga 14-09-2012 , Kebangsaan
Rebab: Dokumentasi dan Pembangunan Teknologi , Penyelidik Bersama , 15-03-2010 sehingga 03-08-2012 , Kebangsaan
Non-Contact On-Line Monitoring and Measurement of Cutting Tool Wear Development During Milling Operation , Penyelidik Bersama , 01-10-2007 sehingga 30-09-2011 , Universiti
Development of a Fatigue Monitoring and Diagnosis System Using Acoustic Emission Technology , Penyelidik Bersama , 01-10-2007 sehingga 30-09-2010 , Universiti
Development of Low Cost Technique For Wear Monitoring of Connecting Rod Bore , Penyelidik Bersama , 01-10-2007 sehingga 30-09-2010 , Universiti
Design and development of a novel hybrid electric propulsion system for motorcycle , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2010 , Universiti
Development of an algorithm for fatigue damage clustering and classification under spectrum loadings , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2010 , Universiti
Development Of A Webcam Based Visual Servo System For Autonomous Robot Control In Agricultural Applications , Penyelidik Bersama , 01-09-2007 sehingga 01-09-2009 , Kebangsaan
Development of high performance composite noise barrier panels from local natural fibre materials , Penyelidik Bersama , 01-08-2007 sehingga 30-09-2009 , Kebangsaan
Development of active sound absorption panel using agro-based orgnaic fibre , Penyelidik Bersama , 01-08-2007 sehingga 01-08-2009 , Kebangsaan
Development Of Advanced Pulse Jet Heating System For Aerospace Applications , Penyelidik Bersama , 01-12-2006 sehingga 30-06-2009 , Kebangsaan
Green Envelope And Breathing Construction Materials , Penyelidik Bersama , 01-12-2006 sehingga 30-11-2008 , Kebangsaan
Development Of A Fatigue Data Editing Algorithm For Road Vehicle Loadings In Time-Frequency Domain , Penyelidik Bersama , 01-12-2006 sehingga 30-11-2008 , Kebangsaan
Fault Diagnosis And Isolation Of Smart Engine Mounting System For Automotive Applications , Penyelidik Bersama , 01-12-2006 sehingga 31-10-2008 , Kebangsaan
ANUGERAH DAN PENGURUSAN / AWARD AND STEWARDSHIP
(Nama Anugerah/Pentadbiran),(Institusi Penganugerahan),(Tahun)

Anugerah UKM

Anugerah Perkhidmatan 20 Tahun / Anugerah Perkhidmatan 20 Tahun , 2017
Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2018
PENYELIAAN PELAJAR / SUPERVISION

Pelajar Sarjana

Penyuntingan Data Lesu Menggunakan Penjelmaan Anak Gelombang Daubeches, SITI NORBAYA BINTI SAHADAN, Sarjana
Pembangunan Sistem Masa Nyata Pemonitoran Haus Mata Alat Dalam Proses Pemesinan., AHMAD SAYUTI, Sarjana
Development of fatigue features clustering algorithm using the wavelet transform., TEUKU EDISAH PUTRA, Sarjana
Kawalan servo visual menggunakan medan aliran optik dalam aplikasi robotik., MUHAMMAD KHALID BIN ZAKARIA, Sarjana
Kajian analisis isyarat vibro-akustik pada enjin pembakaran dalam., MOHD FETRI HUSAINI B. HUSSIN, Sarjana
Analisis perkaitan isyarat terikan lesu dan isyarat getaran sistem ampaian, NUR AZIMA ISMAIL, Sarjana
Development of portable vibration dose value (VDV) real time analyser for ergonomic, NUR FARHANA BINTI KAMARUDDIN, Sarjana
Pembangunan Sistem Pengawasan Haus Mata Alat Atas Talian Menggunakan Tolok, MUHAMMAD RIZAL, Sarjana
ARSHIN OSKOUEIAN, Sarjana
Kajian Pencirian Sifat-sifat Bahan Menggunakan Isyarat Getaran-Akustik, ABDUL RAHIM BIN BAHARI, Sarjana
SITI NUR SARAH BINTI BORHAN, Sarjana
Sistem Brek elektromagnetik Boleh Kawal Menggunakan Arus Pusar., MOHAMAD ZAIRI BIN BAHAROM, Sarjana
KESAN PENDEDAHAN HINGAR PEKERJAAN TERHADAP KEHILANGAN PENDENGARAN, KUALITI HIDUP SERTA TAHAP PENGETAHUAN, SIKAP DAN AMALAN DI KILANG PLASTIK, ALNABIH ASEM I A, Sarjana
Pembangunan Analisis Statistik bagi Pengoptimuman Pengecaman Perlakuan Siri Masa, LENNIE BINTI ABDULLAH, Sarjana
MOHAMAD AMIR SHAFIQ BIN HAJI MOHD TAHIR, Sarjana
ILFAN MUNANDAR, Sarjana
Analisis Berangka Taburan Saiz Partikel Jelaga Di Dalam Enjin Diesel Suntikan Terus, MUHAMMAD AHMAR BIN ZUBER, Sarjana
PERINCIAN KEADAAN GALAS MOTOR ARUHAN MENGGUNAKAN ISYARAT GETARAN DAN PANCARAN AKUSTIK, MOHD SUFIAN BIN OTHMAN, Sarjana
LESU PADA SUHU TINGGI UNTUK ALOI ALUMINIUM AA6061, FAHAD HUSSAIN, Sarjana
FAIZUL RIZAL ISMAIL, Sarjana
MAIN UDDIN AHMED, Sarjana
PEMANTAUAN KEADAAN MATA ALAT MENGGUNAKAN SISTEM CINCIN GELINCIR, WAN NUHA BINTI WAN MANSOR, Sarjana
PEMANTAUAN HAUS MATA ALAT BERASASKAN ISYARAT GETARAN DAN BUNYI, MUHAMAD ARIF FADLI BIN AHMAD, Sarjana
Optimization of energy harvesting eel behind one or two cylinders, MUHAMAD NAZIRUL BIN SULAIMAN, Sarjana

Pelajar Doktor Falsafah

MUHAMMAD NUR BIN OTHMAN, Doktor Falsafah
KAJIAN PEMANTAUAN PEMBAKARAN ENJIN CAJ HOMOGEN NYALAAN MAMPATAN, AZALI BIN AWALUDIN, Doktor Falsafah
Analisis Isyarat Data Terikan Impak Menggunakan Pencirian Tenaga, MOHD BASRI BIN ALI, Doktor Falsafah
Development of Multi Sensors Machining Conditioning Monitoring system., ZAILAN BIN KARIM, Doktor Falsafah
Pencirian Hayat Lesu Bahan Menggunakan Isyarat Ultrabunyi Di Bawah Kesan Turutan Kitaran Beban, MAHFODZAH BINTI MD. PADZI, Doktor Falsafah
Design of A Piezoelectric Ceramic Transducer-Based Mechanical Properties Test for Refractory Metals, ARSHED ABDULHAMED MOHAMMED, Doktor Falsafah
Study of Orifice-Induced Fluid Flow and Pipe Vibration., MOHAMED ABEDALABAS SIBA, Doktor Falsafah
ARTIFICIAL NEURAL NETWORK FOR PREDICTION LARGE DEFLECTION OF BENDING AND VIBRATING OF SIMPLY-SUPPORTTED BEAMS AND PLATES, HAMED MOHAMMADI, Doktor Falsafah
EXPLORATORY STUDIES ON VERY LOW FREQUENCY SOUND ANALYSIS FOR MILITARY COMMUNICATION, SHAMSUL AKMAR BIN AB AZIZ, Doktor Falsafah
Generating Realistic Strain Signals Using Simulations Under Consideration Of External Disturbances Leading to Fatigue Failure., TEUKU EDISAH PUTRA, Doktor Falsafah
Control of Cracking in Concrete Structure Using Properly Selected Materials., NADOM KHALIFA MUTLIB, Doktor Falsafah
Pembangunan Sistem Pemantauan Mata Alat Berputar Tanpa Wayar Dengan Penderia Berbilang Bersepadu, MUHAMMAD RIZAL, Doktor Falsafah
Effect of road inputs to vehicle components, SAEED SHOJAEI, Doktor Falsafah
MUHAMAD ARIF FADLI BIN AHMAD, Doktor Falsafah
PENJANAAN INDEKS KESELAMATAN KEROSAKAN LESU BERASASKAN, MOHD FARIDZ BIN MOD YUNOH @ MOHD YUNUS, Doktor Falsafah
KESAN MINYAK BERASASKAN BIO TERHADAP KETIDAKSTABILAN DINAMIK DALAM FILEM CECAIR SISTEM GALAS JURNAL, MUHAMMAD IMRAN SADIQ, Doktor Falsafah
ONLINE STEADY-STATE ADAPTIVE OPTIMISING CONTROL OF LARGE-SCALE INDUSTRIAL CHEMICAL PROCESSES, KIU MAY YEE, Doktor Falsafah
MODEL BERSEPADU UNTUK MERAMAL KETIDAKSELESAAN PEMANDU KETIKA, NOR KAMALIANA BINTI KHAMIS, Doktor Falsafah
ANALISIS PERETAKAN KAKISAN TEGASAN DI BAWAH PEMBEBANAN ALAH, SABER RASHID TRABULSI, Doktor Falsafah
PENUAI TENAGA DEBARAN DIARUHI VORTEKS DARIPADA ALIRAN UDARA, AHMED BASHEER GHENI, Doktor Falsafah
PEMBANGUNAN KAEDAH PENCIRIAN SIFAT MEKANIKAL BAHAN, MOHD IRMAN BIN RAMLI, Doktor Falsafah
NURUL AIN BINTI AHMAD LATIF, Doktor Falsafah
PEMANTAUAN FASA HAUS MATA ALAT BERASASKAN PEMBELAJARAN MESIN SEPARA TERSELIA-FIXUM K-MEANS (F-KM), NUR ADILLA BINTI KASIM, Doktor Falsafah
RAZALI BIN SAMIN, Doktor Falsafah
PEMANTAUAN KEGAGALAN INJAP DAN PALAM PENCUCUH MENGGUNAKAN KAEDAH PEMBELAJARAN MESIN Z-NN DAN ANALISIS STATISTIK Z-FREQ, NOR AZAZI BIN NGATIMAN, Doktor Falsafah
ALGORITMA GENETIK UNTUK PENGOPTIMUMAN PARAMETER KEBOCORAN FLUX MAGNET (MFL) BERDASARKAN ANALISIS STATISTIK NOVEL I-KAZ UNTUK KLASIFIKASI KECATATAN ALUR, NOR AFANDI BIN SHARIF, Doktor Falsafah
Pembangunan Model getaran lesu terhadap sistem ampaian kenderaan bagi jenis jalan yang berbeza, AIREE AFIQ BIN ABD RAHIM, Doktor Falsafah
ISMAIL BIN MUSTAPHA, Doktor Falsafah
PENGOPTIMUMAN PENUAI TENAGA PIEZOELECTRIK DIKAWASAN GETARAN, MOHD NOR FAKHZAN BIN MOHD KAZIM, Doktor Falsafah
KHIDMAT SOSIAL / SOCIAL @ PUBLIC ENGAGEMENT
(Sumbangan),(Tempoh),(Peringkat)

Khidmat Luar

SVAM COMMITTEE MEMBER , 28-11-2020 sehingga 27-11-2022 , Kebangsaan
Development of Alternative to Machining Condition Monitoring System using Multisensor and I-KAZ Multilevel Signal Analysis Method , 18-09-2020 sehingga 01-01-1970 , Kebangsaan
Development of Microphone Based Sound Signal Acquisition for Mechanical Monitoring , 22-02-2021 sehingga 21-02-2022 , Antarabangsa

Khidmat Dalam

AHLI JAWATANKUASA PENYEDIAAN DOKUMEN SELF ASSESMENT REPORT (SAR) COPPA 2017 , 15-08-2018 sehingga 31-12-2019 , Fakulti / Institut / Pusat Perkhidmatan
JAWATANKUASA PENYEDIAAN DOKUMEN SEMAKAN PROGRAM SISWAZAH 2020 , 03-03-2020 sehingga 01-01-1970 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Gotong Royong Perdana Jabatan Kejuruteraan Mekanikal dan Pembuatan 2022 , 20-07-2022 sehingga 20-07-2022 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah 49/2015 , 22-06-2015 sehingga 22-06-2015 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil. 23/2016 (M) , 12-08-2016 sehingga 12-08-2016 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil. 3/2016 (M) , 04-02-2016 sehingga 04-02-2016 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 05/2020 (M.JKKP) , 04-03-2020 sehingga 04-03-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 05/2021 (P.KMP) , 24-02-2021 sehingga 24-02-2021 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 11/2022 (P.JKMP) , 25-04-2022 sehingga 25-04-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 14/2020 (M.JKKP) , 09-10-2020 sehingga 09-10-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 17/2017 (M) , 14-09-2017 sehingga 14-09-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 2/2017 (M) , 17-03-2017 sehingga 17-03-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 2/2020 (P.KMP) , 20-01-2020 sehingga 20-01-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 23/2018 (M.Cespro) , 12-10-2018 sehingga 12-10-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 37/2019 (P.KMP) , 06-12-2019 sehingga 06-12-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 4/2019 (M.Integra) , 06-03-2019 sehingga 06-03-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 4/2019 (P.Serambi) , 28-06-2019 sehingga 28-06-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 4/2019 (P.Serambi) , 20-08-2019 sehingga 20-08-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 5/2018 (P.CESPRO) , 01-03-2018 sehingga 01-03-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 5/2018 (P.Prisma) , 02-03-2018 sehingga 02-03-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 6/2019 (M.Prisma) , 08-10-2019 sehingga 08-10-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa SAR dan Akreditasi 2022 , 01-03-2021 sehingga 28-02-2023 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Jawatankuasa Unit Penambahbaikan Pengajaran dan Pembelajaran (UP3) JKMP , 01-03-2021 sehingga 28-02-2023 , Fakulti / Institut / Pusat Perkhidmatan
Pemeriksa Siswazah Ijazah Sarjana Sains (Seni Bina) , 21-10-2015 sehingga 21-10-2015 , Fakulti / Institut / Pusat Perkhidmatan
Pengawas Untuk Peperiksaan (Akhir) Bagi Program Sarjana Kerja Kursus Semester I Sesi 2019/2020 , 09-01-2020 sehingga 09-01-2020 , Fakulti / Institut / Pusat Perkhidmatan