Untuk Kegunaan UKM sahaja
For UKM use only
Mariyam Jameelah Ghazali menyandang jawatan Profesor di Jabatan Kejuruteraan Mekanik dan
Pembuatan, Universiti Kebangsaan Malaysia. Beliau juga merupakan salah seorang penyelidik utama Kumpulan Bahan Termaju dan felo bersekutu Selfuel (SOFC). Pernah dilantik sebagai Profesor Pelawat di Nagaoka University di Jepun pada tahun 2018. Dalam jawatan perkhidmatan universiti, beliau pernah dilantik sebagai Ketua Editor Jurnal Kejuruteraan UKM, Pengerusi Pertandingan Syarahan Bahan (Materials Lecture Competition) untuk peringkat UKM dan di peringkat Kebangsaan 2015. Beliau turut aktif dalam organisasi dan badan profesional di Malaysia mahupun antarabangsa, di mana beliau merupakan pengasas bersama Persatuan Tribologi Malaysia (Malaysian Tribology Society – MyTribos). Terkini beliau telah dilantik sebagai Naib Pengerusi untuk Majlis Tribologi Asia sehingga tahun 2022. Di samping itu, beliau telah banyak menerima anugerah dalam bidang akademik dan penyelidikan di peringkat kebangsaan dan antarabangsa.
Mariyam Jameelah obtained her B.Eng.(Hons), Mat. Eng from University Sains Malaysia in 1999. This was followed by her M.Sc. in Materials Engineering from the same university and Ph.D. from University of Sheffield, UK in 2000 and 2005 respectively. On completion of her PhD, she was appointed as a tutor in 2002 at UKM. She is currently appointed as a full Professor in Mechanical & Manufacturing Engineering Department, UKM and recently was a Visiting Professor at Nagaoka University of Technology, Japan. Administratively, she was appointed as Chief Editor of Journal Kejuruteraan UKM, and currently holding a post as an Assistant Dean for Entrepreneur and Creativity of Engineering & Built Environment Faculty. She sat on many committees at International, National and University levels.She was the co-founder of the Malaysian Tribology Society (MYTRIBOS) and served as the secretary of Malaysia Tribology Society from 2007 until 2019. Currently she has been appointed as the Vice President (Academics) for Mytribos and also the Vice President for Asia Tribology Council (ATC). She has received numerous research grants and awarded outstanding academic achievements as well as members of many international and national professional organizations. She has successfully supervised many local and foreign Master and PhD students. She enjoys cycling and reviewing papers, and still being invited to review many journal articles by renowned publishers.
| Doktor Falsafah , UNIV. OF SHEFFIELD , 2005 |
| Sarjana , UNIV. SAINS MALAYSIA , 2001 |
| Sarjana Muda , UNIV. SAINS MALAYSIA , 2000 |
| PURE AND APPLIED SCIENCES - MATERIALS SCIENCE (tribology) |
| A.rajabi, Y.b. Kar, C. Doroody, T. S. Kiong, N.l A.arzaee, M. F. M. Noh, M.beygisangchin, M. Y. Ghotbi, M.nur E. Alam, H. Venu, M. Elahi M. Soudagar, N.asim, A.h. Baghdadi, M.j. Ghazali. (2024). Physiochemical And Electrical Activities Of Nano Copper Oxides Synthesised Via Hydrothermal Method Utilising Natural Reduction Agents For Solar Cell Application. - Nanotechnology Reviews. 1-10. |
| Alireza Doroudi, Hamid Omidvar, Ali Dastgheib, Mohammad Khorram, Armin Rajabi, Amir Hossein Baghdadi, And Mariyam Jameelah Ghazali. (2023). Effect Of Mbf-20 Interlayer On The Microstructure And Corrosion Behaviour Of Inconel 625 Super Alloy After Diffusion Brazing. - Materials. 1-18. |
| H.n. Abu Bakar, J.a. Ghani, C.h. Che Haron, M.j. Ghazali , M.s. Kasim, S. Al-zubaidi, N. Jouini. (2023). Wear Mechanisms Of Solid Carbide Cutting Tools In Dry And Cryogenic Machining Of Aisi H13 Steel With Varying Cutting-edge Radius. - Wear. 1-8. |
| Haizum Aimi Zaharin, Mariyam Jameelah Ghazali, Mohammad Khalid, Thachnatharen Nagarajan, Wong Weng Pin, Farah Ezzah, Ong Gerard, Rashmi Walvekar And Abdul Khaliq Rasheed. (2023). Tribological, Oxidation And Thermal Analysis Of Advanced Microwave Hydrothermal Synthesised Ti3c2tx Mxene As Additives In Outboard Engine Oil. - Lubricants. 1-20. |
| Afida Jemat, Masfueh Razali, Yuichi Otsuka, Mariyam Jameelah Ghazali. (2023). Enhancement Of Human Gingival Fibroblasts Bioactivity And Proliferation On Plasma Sprayed Yttria-stabilised Zirconia/tio2 Surface Coating Of Titanium Alloys: An In-vitro Study. - Coatings. 1-13. |
| H.a. Zaharin, M.j. Ghazali, N. Thachnatharen, F. Ezzah, Rashmi Walvekar, M. Khalid. (2023). Progress In 2d Materials Based Nanolubricants: A Review. - Flachem. 1-33. |
| Nurulhuda Mohd, Masfueh Razali, Mariyam Jameelah Ghazali, Noor Hayaty Abu Kasim. (2022). 3d-printed Hydroxyapatite And Tricalcium Phosphates-based Scaffolds For Alveolar Bone Regeneration In Animal Models: A Scoping Review. - Materials. 1-16. |
| Nurulhuda Mohd, Masfueh Razali, Mariyam Jameelah Ghazali, Noor Hayaty Abu Kasim. (2022). Current Advances Of Three-dimensional Bioprinting Application In Dentistry: A Scoping Review. - Materials. 1-25. |
| Nilofar Asim, Mohd Sukor Suait, Marzieh Badiei, Masita Mohammad, Md. Akhtaruzzaman, Armin Rajabi, Nowshad Amin And Mariyam Jameelah Ghazali. (2022). Perspectives In Biopolymer-graphene-based Composite Application: Advances, Challenges, And Recommendations. - Nanotechnology Reviews. 1525-1554. |
| Armin Rajabi, Peter Hodgson, Mariyam J. Ghazali, Zainuddin Sajuri, Alireza Almaslow, Hamid Ahmad Mehrabi, Amir Hossein Baghdadi. (2022). Challenges And Solutions In The Synthesis Of Nano-ticn: A Review. - Ceramic International. 8921-8929. |
| Nilofar Asim , Marzieh Badiei, Masita Mohammad, Halim Razali , Armin Rajabi , Lim Chin Haw, Mariyam Jameelah Ghazali. (2022). Sustainability Of Heating, Ventilation And Air-conditioning (hvac) Systems In Buildings-an Overview. - International Journal Of Environmental Research And Public Health. 1-16. |
| M.a. Abdelgnei, M.z. Omar, M.j. Ghazali, M.n. Mohammed. (2022). Microstructure Evaluation And Mechanical Properties Of Thixoformed Al-5.7si-2cu-0.3mg Aluminum Alloys. - International Journal Of Metalcasting. 370-384. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Jariah Mohamad Juoi, Toibah Abd Rahim, Zaleha Mustafa. (2022). Plasma-sprayed Tio2 Coatings: Hydrophobicity Enhanced By Zno Additions. - International Journal Of Applied Ceramic Technology. 2213-2221. |
| Isyraf Aznam, Joelle C.w. Mah, Andanastuti Muchtar, Mahendra R. Somalu, Mariyam J. Ghazali. (2021). Electrophoretic Deposition Of (cu,mn,co)3o4 Spinel Coating On Sus430 Ferritic Stainless Steel: Process And Performance Evaluation For Solid Oxide Fuel Cell Interconnect Applications. - Journal Of The European Ceramic Society. 1360-1373. |
| Mariyam J. Ghazali, Xu Ren, Armin Rajabi, Wan Fathul Hakim W. Zamr, Nadia Mohd Mustafah And Jing Ni. (2021). Finite Element Analysis Of Cushioned Diabetic Footwear Using Ethylene Vinyl Acetate Polymer. - Polymer. 1-12. |
| Elaine Zi Fan Soh, Ohnmar Htwe, Amaramalar Selvi Naicker, Armin Rajabi Nasirabadi, Mariyam Jameelah Ghazali, Nadia Mohd Mustafah, Irraivan Elamvazuthi, Brenda Saria Yuliawiratman, Manimalar Selvinaicker. (2020). Stepease Diabetic Socks: An Answer To Efficacious Indoor Foot Pressure Relief - A Prospective Study. - Journal Of Tissue Viability. 104-109. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Yuichi Otsuka, Kiyoshi Ohnuma, Sarita Morakul, Susumu Nakamura, Mohd Fadzli Abdollah. (2020). Antibacterial Properties Of Laser Surface-textured Tio2/zno Ceramic Coatings. - Ceramics International. 3949-3959. |
| Zahra Mahmoudi, Seyed Hadi Tabaian, Hamid Reza Rezaie, Farzad Mahboubi, Mariyam Jameelah Ghazali. (2020). Synthesis Of Ti2alc And Ti3alc2 Max Phases By Arc-pvd Using Tial Target In C2h2/ Ar Gas Mixture And Subsequent Annealing. - Ceramics International. 4968-4975. |
| M.a. Abdelgnei, M.z. Omar, M.j. Ghazali, M.n. Mohammed, B. Rashid. (2020). Dry Sliding Wear Behaviour Of Thixoformed Al-5.7si-2cu-0.3 Mg Alloys At High Temperatures Using Taguchi Method. - Wear. 1-12. |
| Ahmad Afiq Pauzi, Mariyam Jameelah Ghazali, Wan Fathul Hakim W. Zamri And Armin Rajabi. (2020). Wear Characteristics Of Superalloy And Hardface Coatings In Gas Turbine Applications - A Review. - Metals. 1-14. |
| Armin Rajabi, Mariyam Jameelah Ghazali, Intan Fadhlina Mohamed, Norhamidi Muhamad. (2020). Novel Precursor Of Nitrogen For The Synthesis Of Tic0.7n0.3 Through Vacuum Oven-induced Combustion. - Ceramics International. 9271-9280. |
| Armin Rajabi, Mariyam Jameelah Ghazali, Ebrahim Mahmoudi, Amir Hossein Baghdadi, Abdul Wahab Mohammad, Nadia Mohd Mustafah, Htwe Ohnmar, Amaramalar Selvi Naicker. (2019). Synthesis, Characterization, And Antibacterial Activity Of Ag2o-loaded Polyethylene Terephthalate Fabric Via Ultrasonic Method. - Nanomaterials. 450-462. |
| Juyana Abdul Wahab, Mariyam Jameelah Ghazali. (2019). Erosion Resistance Of Laser Textured Plasma-sprayed Al2o3-13%tio2 Coatings On Mild Steel. - Wear. 2029-2037. |
| Noor Faeizah Amat, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali, Norziha Yahaya. (2019). Effect Of Sintering Temperature On The Aging Resistance And Mechanical Properties Of Monolithic Zirconia. - Journal Of Materials Research Technology. 1092-1101. |
| Hasrawati Abu Hassan, Mariyam Jameelah Ghazali, Cevdet Meric, Che Husna Azhari. (2019). Wettability Effect Of The Surface Morphologies Of Musa Acuminata Leaves. - Bioresources. 8331-8344. |
| Dinesh Ragurajan, Mohsen Golieskardi, Meenaloshini Satgunam, Md Enamul Hoque, Angela Min Hwei Ng, Mariyam Jameelah Ghazali, Ahmad Kamal Ariffin. (2018). Advanced 3y-tzp Bioceramic Doped With Al2o3 And Mno2 Particles Potentially For Biomedical Applications: Study On Mechanical And Degradation Properties. - Journal Of Materials Research And Technology. . |
| Kin Yuen Leong, Idayu Razali, K.z. Ku Ahmad, Hwai Chyuan Ong, M.j. Ghazali, Mohd Rosdzimin Abdul Rahman. (2018). Thermal Conductivity Of An Ethylene Glycol/water-based Nanofluid With Copper-titanium Dioxide Nanoparticles: An Experimental Approach. - International Communications In Heat And Mass Transfer. 23-28. |
| N.h. Sulaiman, M.j. Ghazali, J. Yunas, A. Rajabi, B.y. Majlis, M. Razali. (2018). Synthesis And Characterization Of Cafe2o4 Nanoparticles Via Co-precipitation And Auto-combustion Methods. - Ceramic International. 46-50. |
| A.rajabi, M.j. Ghazali, E. Mahmoudi, S. Azizkhani, N.h. Sulaiman, A.w. Mohammad, N.m. Mustafah, H. Ohnmar, A.s. Naicker. (2018). Development And Antibacterial Application Of Nanocomposites: Effects Of Molar Ratio On Ag2o-cuo Nanocomposite Synthesised Via The Microwave-assisted Route. - Ceramics International. 21591-21598. |
| Isyraf Aznam, Joelle Chia Wen Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali.. (2018). A Review Of Key Parameters For Effective Electrophoretic Deposition In The Fabrication Of Solid Oxide Fuel Cells. - Journal Of Zhejiang University: Science A. . |
| Noor Faeizah Amat, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali And Norziha Yahaya. (2018). Preparation Of Presintered Zirconia Blocks For Dental Restorations Through Colloidal Dispersion And Cold Isostatic Pressing. - Ceramics International. 6409-6416. |
| A. Jemat, M.j. Ghazali, M. Razali, Y. Otsuka, A. Rajabi,. (2018). Effects Of Tio2 On Microstructural, Mechanical Properties And In-vitro Bioactivity Of Plasma Sprayed Yttria Stabilised Zirconia Coatings For Dental Application. - Ceramics International. 4271-4281. |
| B Rashid, Z Leman, M Jawaid, Mj Ghazali, Mr Ishak. (2017). Effect Of Treatments On The Physical And Morphological Properties Of Spf/phenolic Composites. - Journal Of Natural Fibers. 1-13. |
| Nidal W. Elshereksi, Mariyam Jameelah Ghazali, Andanastuti Muchtar, Che Husna Azhari. (2017). Studies On The Effects Of Titanate And Silane Coupling Agents On The Performance Of Poly (methyl Methacrylate)/barium Titanate Denture Base Nanocomposites. - Journal Of Dentistry. 121-132. |
| J. A. Wahab,m. J. Ghazali, Z. Sajuri, Y. Otsuka, M. Jayaprakash, S. Nakamura, A. F. S. Baharin. (2017). Effects Of Micro-grooves On Tribological Behaviour Of Plasma-sprayed Alumina-13%titania Coatings. - Ceramic International. 6410-6416. |
| Bushra Rashid, Zulkiflle Leman, Mohammad Jawaid, Mariyam Jameelah Ghazali, Mohamad Ridzwan Ishak. (2017). Influence Of Treatments On The Mechanical And Thermal Properties Of Sugar Palm Fibre Reinforced Phenolic Composites. - Bioresources. 1447-1462. |
| Joelle C.w. Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam J. Ghazali. (2017). Metallic Interconnects For Solid Oxide Fuel Cell: A Review On Protective Coating And Deposition Techniques. - International Journal Of Hydrogen Energy. 9219-9229. |
| B Rashid, Z Leman, M Jawaid, Mj Ghazali, Mr Ishak, Ma Abdelgnei. (2017). Dry Sliding Wear Behavior Of Untreated And Treated Sugar Palm Fiber Filled Phenolic Composites Using Factorial Technique. - Wear. 26-35. |
| Bushra Rashid, Mohammed Zulkiflle Leman, Mohammad Jawaid, Mariyam Jameelah Ghazali, Mohamad Ridzwan Ishak. (2017). Dynamic Mechanical Analysis Of Treated And Untreated Sugar Palm Fibre-based Phenolic Composites. - Bioresources. 3448-3462. |
| Ky Leong, Kz Ku Ahmad, Hwai Chyuan Ong, Mj Ghazali, Azizah Baharum. (2017). Synthesis And Thermal Conductivity Characteristic Of Hybrid Nanofluids: A Review. - Renewable & Sustainable Energy Reviews. 868-878. |
| Sh Hamdan, Wwf Chong, J-h Ng, Mj Ghazali, Rjk Wood. (2017). Influence Of Fatty Acid Methyl Ester Composition On Tribological Properties Of Vegetable Oils And Duck Fat Derived Biodiesel. - Tribology International. 76-82. |
| Joelle C.w. Mah, Andanastuti Muchtar, Mahendra R. Somalu, Mariyam J. Ghazali, Jarot Raharjo. (2017). Formation Of Sol-gel Derived (cu,mn,co)3o4 Spinel And Its Electrical Properties. - Ceramics International. 7641-7646. |
| K.s. Alhawari, M.z. Omar, M.j. Ghazali, M.s. Salleh, M.n. Mohammed. (2017). Microstructural Evolution During Semisolid Processing Of Al-si-cu Alloy With Different Mg Contents. - Transactions Of Nonferrous Metals Society Of China. 1483-1497. |
| Armin Rajabi, Mariyam J. Ghazali. (2017). Quantitative Analyses Of Tic Nanopowders Via Mechanical Alloying Method. - Ceramics International. 14233-14242. |
| Mohd Fadzli Bin Abdollah, Noritsugu Umehara, Mariyam Jameelah Binti Ghazali And Mohamed El Mansori. (2016). Introduction-advances And Challenges In Carbon-based Tribomaterials. - Journal Of Materials Research. 1. |
| Ping Chuan Siow, Jaharah Abdul Ghani, Che Hassan Che Haron, Mariyam Jameelah Ghazali And Talib Ria Jaafar. (2016). Effect Of Carbon Content In Ticxn1x Coating On The Adhesivity Of Carbide Cutting Tools And Machining Performance. - Journal Of Material Research. 1880-1884. |
| J. A. Wahab, M. J. Ghazali, W. M. W. Yusoff And Z. Sajuri. (2016). Enhancing Material Performance Through Laser Surface Texturing: A Review. - Transactions Of The Imf. 193-198. |
| M.j. Ghazali, S.m. Forghani, N. Hassanuddin, A. Muchtar, A.r.daud. (2016). Comparative Wear Study Of Plasma Sprayed Tio2 And Al2o3-tio2 On Mild Steels. - Tribology International. 681-686. |
| D. Ragurajan, M. Satgunam, M. Golieskardi, A.k. Ariffin And M.j. Ghazali. (2016). Effect Of Air Sintering On Microstructural And Mechanical Properties Of Aluminum Oxide / Manganese Oxide Doped Y- Tzp. - Journal Of The Australian Ceramic Society. 128-133. |
| Bushra Rashid, Zulkiflle Leman, Mohammad Jawaid, Mariyam Jameelah Ghazali And Mohamad Ridzwan Ishak. (2016). The Mechanical Performance Of Sugar Palm Fibres (ijuk) Reinforced Phenolic Composites. - International Journal Of Precision Engineering And Manufacturing. 1001-1008. |
| Bushra Rashid, Z. Leman, M. Jawaid, M. J. Ghazali, M. R. Ishak. (2016). Physicochemical And Thermal Properties Of Lignocellulosic Fiber From Sugar Palm Fibers: Effect Of Treatment. - Cellulose. 2905-2916. |
| K.s. Alhawari, M.z. Omar, M.j. Ghazali, M.s. Salleh, M.n. Mohammed. (2015). Evaluation Of The Microstructure And Dry Sliding Wear Behaviour Of Thixoformed A319 Aluminium Alloy. - Materials And Design. 169-180. |
| Karim Z., Nuawi M.z., Ghani J.a., Ghazali M.j., Abdullah S., Mansor N.i.i.. (2015). Sliding Wear Evaluation Of Aluminum Alloy (7075-t6) On Hardened Steel (aisi4340) Via Non-contact Technique By I-kaz™ Multi-level Analysis. - Wear. 99-104. |
| Rajabi A., Ghazali M.j., Daud A.r.. (2015). Chemical Composition, Microstructure And Sintering Temperature Modifications On Mechanical Properties Of Tic-based Cermet : A Review. - Materials & Design. 95-106. |
| A. Rajabi, M.j. Ghazali, J. Syarif , A.r. Daud. (2014). Development And Application Of Tool Wear: A Review Of The Characterization Of Tic-based Cermets With Different Binders. - Chemical Engineering Journal. 255: 445-452. |
| S.m. Forghani, Mj Ghazali, A. Muchtar, A.r. Daud. (2014). Mechanical Properties Of Plasma Sprayed Nanostructured Tio2 Coatings On Mild Steel. - Ceramics International. 40 (2014):7049-7056. |
| Noor Faeizah Amat, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Norziha Yahaya. (2014). Suspension Stability And Sintering Influence On Yttria-stabilized Zirconia Fabricated By Colloidal Processing. - Ceramics International. 40(4):5413-5419. |
| Ping Chuan Siow, Jaharah A. Ghani, Mariyam Jameelah Ghazali, Talib Ria Jaafar, Mohamad Asri Selamat, Che Hassan Che Haron. (2013). Characterization Of Ticn And Ticn/zrn Coatings For Cutting Tool Application. - Ceramics International. 39(4):1293-1298. |
| A. Almaslow, M.j. Ghazali, R.j. Talib, C.t. Ratnam, C.h. Azhari. (2013). Effects Of Epoxidized Natural Rubber-alumina Nanoparticles (enran) Composites In Semi-metallic Brake Friction Materials. - Wear. 302:1392-1396. |
| K.a. Zakaria, S. Abdullah, M.j. Ghazali. (2013). Comparative Study Of Fatigue Life Behaviour Of Aa6061 And Aa7075 Alloys Under Spectrum Loadings. - Materials And Design. 49:48-57. |
| K.a. Zakaria, S. Abdullah, M.j. Ghazali, C.h. Azhari. (2013). Influence Of Spectrum Loading Sequences On Fatigue Life In A High-temperature Environment. - Engineering Failure Analysis. 30:111-123. |
| S.m. Forghani, M.j. Ghazali, A. Muchtar, A.r. Daud, N.h.n. Yusoff, C.h. Azhari. (2013). Effects Of Plasma Spray Parameters On Tio2-coated Mild Steel Using Design Of Experiment (doe) Approach. - Ceramics International. 39(3):3121-3127. |
| N.h.n. Yusoff, M.j. Ghazali, M.c. Isa, A.r. Daud, A. Muchtar. (2013). Effects Of Powder Size And Metallic Bonding Layer On Corrosion Behaviour Of Plasma-sprayed Al2o3-13% Tio2 Coated Mild Steel In Fresh Tropical Seawater. - Ceramics International. 39(3):2527-2533. |
| M.j. Ghazali, N.i.i. Mansor, M.z. Nuawi, J.a. Ghani. (2013). Facile Wear Failure Monitoring Of Commercial Bearing Alloys Using I-kaz Method. - Engineering Failure Analysis. 35:545-553. |
| A. Almaslow, C.t. Ratnam, M.j. Ghazali, R.j. Talib, C.h. Azhari. (2013). Effects Of Electron-beam And Sulfur Crosslinking Of Epoxidized Natural Rubber On The Friction Performance Of Semimetallic Friction Materials. - Composites Part B: Engineering. 54:377-382. |
| N.h.n. Yusoff, M.j. Ghazali, M.c. Isa, A.r. Daud, A. Muchtar, S.m. Forghani. (2012). Optimization Of Plasma Spray Parameters On The Mechanical Properties Of Agglomerated Al2o3-13%tio2 Coated Mild Steel. - Materials & Design. 39:504-508. |
| A.e. Ismail, A.k. Ariffin, S. Abdullah, M.j. Ghazali. (2012). Stress Intensity Factors For Surface Cracks In Round Bar Under Single And Combined Loadings. - Meccanica. 47:1141-1156. |
| J.a. Ghani, M. Rizal, M.z. Nuawi, M.j. Ghazali, C.h.c. Haron. (2011). Monitoring Online Cutting Tool Wear Using Low-cost Technique And User-friendly Gui. - Wear. 271(9-10):2619? 2624. |
| Mohamad, N; Muchtar, A; Ghazali, Mj; Mohd, Dhj; Azhari, Ch. (2010). Epoxidized Natural Rubber-alumina Nanoparticle Composites: Optimization Of Mixer Parameters Via Response Surface Methodology. - Journal Of Applied Polymer Science. 115(1):183-189. |
| Anasyida A.s., Daud A.r., Ghazali M.j.. (2010). Dry Sliding Wear Behaviour Of Al-12si-4mg Alloy With Cerium Addition. - Materials And Design. 31(1):365-374. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Mastura Mohammad Taha, Noor Irinah Omar. (2023). A Brief Overview Of The Marine Environmentally Friendly Anti-fouling Surface Strategy. - Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology. 1384-1393. |
| Sindhu Budati, Z. Leman, Mh Sulaiman, Ma Azmah Hanim And Mj Ghazali. (2023). An Investigation Into The Physical, Mechanical, Tribology, Thermal And Durability Performance Of Commercial Brake Material For Rail Transportation. - Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology. 1620-1631. |
| Noor Khairin Mohd, Yeong Shoot Kian, Nor Azowa Ibrahim, Siti Mariam Mohd Nor, Wan Md Zin Wan Yunus, Mariyam Jameelah Ghazali, Lim Wen Huei. (2021). Corrosion Inhibition, Adsorption And Thermodynamic Properties Of Hydrophobic-tailed Imines On Carbon Steel In Hydrochloric Acid Solution: A Comparative Study. - Journal Of Adhesion Science And Technology. 2558-2579. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Yuichi Otsuka, Sarita Morakul, Susumu Nakamura, Kiyoshi Ohnuma, Mohd Fadzli Bin Abdollah. (2019). Wettability Characteristics Of Laser Surface Textured Plasma Sprayed Tio2/zno Coatings. - Tribology Online. 279-284. |
| Ahmad Afiq Pauzi, Mariyam Jameelah Ghazali, Salmi Mohd Yunus, Wan Fathul Hakim W Zamri, Che Husna Azhari, Shuib Husin. (2019). Wear Characteristics Of Gas Turbine Fuel Nozzle-contacting Surface At Different Contact Temperatures. - Jurnal Tribologi. 108-122. |
| Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal, Talib Ria Jaafar, Mariyam Jameelah Ghazali, Che Hassan Che Haron. (2019). Surface Characterisation Of Ticxn1x Coatings Processed By Cathodic Arc Physical Vapour Deposition: Xps And Xrd Analysis. - Surface And Interface Analysis. 611-617. |
| Isyraf Aznam, Joelle Mah Chia Wen, Andanastuti Muchtar, Nurul Akidah Baharuddin, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2019). Kelakuan Pengoksidaan Keluli Tahan Karat Berferit Sus430 Dan Kesan Pemeruapan Spesies Cr Bergas Kepada Permukaan Katod Lscf Dalam Suhu Operasi Sel Fuel Oksida Pepejal. - Sains Malaysiana. 861-869. |
| Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal, Talib Ria Jaafar, Mariyam Jameelah Ghazali, Che Hassan Che Haron. (2019). The Study On The Properties Of Ticn Coatings Processed By Cathodic Arc Physical Vapour Deposition. - Tribology - Materials, Surfaces & Interfaces. 58-66. |
| Ahmad Afiq Pauzi, Salmi Mohd Yunus, Shuib Husin, Mariyam Jameelah Ghazali, Wan Fathul Hakim W Zamri. (2018). Wear Characteristics Of A Combustion Liner For Power Generation Gas Turbine. - International Journal Of Materials And Product Technology. . |
| Afida Jemat, Mariyam Jameelah Ghazali, Masfueh Razali, Yuichi Otsuka. (2018). Microstructural, Surface Roughness And Wettability Of Titanium Alloy Coated By Yzp/tio2 For Dental Application. - Jurnal Teknologi. . |
| Noor Faeizah Amat, Shari Lawuo Raji, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali, Norziha Yahaya. (2018). Influence Of Presintering Parameters On The Mechanical Properties Of Presintered Dental Zirconia Block. - International Journal Of Integrated Engineering. . |
| Mohd,n K, Mariyam Jameelah Ghazali, Yeong Shoot Kian, Nor Azowa Ibrahim, Wan Md Zin Wan Yunus, Siti Mariam Mohd Nor, Zainab Idris. (2017). Corrosion Inhibition Of Mild Steel In Hydrochloric Acid Solution Using Fatty Acid Derivatives. - Journal Of Oil Palm Research. 97-109. |
| Mariyam Jameelah Ghazali, Ahmad Firdaus Shamsul Baharin, Juyana A Wahab, Andanastuti Muchtar. (2017). Erosive Wear Resistance Of Dimpled Ceramic Coatings On Mild Steels. - Industrial Lubrication And Tribology. 155-159. |
| Khaled Salem Alhawari, Mohd Zaidi Omar, Mariyam Jameelah Ghazali, Mohd Shukor Salleh, Mohammed Naser Abdulrazaq. (2017). Effect Of Thixoforming On The Wear Properties Of Al-si-cu Aluminium Alloy. - Jurnal Teknologi. . |
| Nidal Wanis Elshereksi, Mariyam Jameelah Ghazali, Andanastuti Muchtar & Che Husna Azhari. (2017). Review Of Titanate Coupling Agents And Their Application For Dental Composite Fabrication. - Dental Materials Journal. 539-552. |
| N.h. Sulaiman, M.j. Ghazali, B.y. Majlisb, J. Yunas, M. Razali. (2017). Influence Of Calcination Temperatures On Structure And Magnetic Properties Of Calcium Ferrite Nanoparticles Synthesized Via Sol-gel Method. - Jurnal Tribologi. 38-47. |
| Hasrawati Abu Hassan, Mariyam Jameelah Ghazali, Nurfatihah Mohamed Zainuddin, Che Husna Azhari. (2017). Kesan Lilin Ke Atas Sifat Hidrofobik Permukaan Daun Pisang. - Jurnal Kejuruteraan. 1-7. |
| K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh And M. N. Mohammed. (2016). Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic Al-si-cu Alloy With Different Amounts Of Magnesium. - Composite Interfaces. 519-531. |
| Ahmad Firdaus Shamsul Baharin, Mariyam Jameelah Ghazali, Juyana A. Wahab. (2016). Laser Surface Texturing And Its Contribution To Friction And Wear Reduction: A Brief Review. - Industrial Lubrication And Tribology. 57-66. |
| A. Jemat, M. J. Ghazali, M. Razali, And Y. Otsuka. (2015). Surface Modifications And Their Effects On Titanium Dental Implants. - Biomed Research International. 1-11. |
| M.j. Ghazali, M. Daud, A. Muhammad, M.z. Omar, C.h. Azhari. (2015). Microstructure Analyses Of Malay Keris And Its Relation To Mechanical Properties. - Acta Physica Polonica A. 1358-1362. |
| N.h. Sulaimana, M.j. Ghazali, B.y. Majlis, J. Yunas And M. Razali. (2015). Superparamagnetic Calcium Ferrite Nanoparticles Synthesized Using A Simple Sol Gel Method For Targeted Drug Delivery. - Bio-medical Materials And Engineering. 103-110. |
| Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar, And Che H. Azhari. (2014). Perspectives For Titanium-derived Fillers Usage On Denture Base Composite Construction: A Review Article. - Advances In Materials Science And Engineering. 1-13. |
| K. A Zakaria, S. Abdullah, M. J. Ghazali, M. Z. Nuawi, S.m. Beden & Z. M. Nopiah. (2014). Fatigue Strain Signal Behaviour And Damage Assessment Of An Engine Mount Bracket. - Journal Of Scientific & Industrial Research. 73(2014):112-116. |
| Junaidi Syarif, Agung Iswadi, Mariyam Jameelah Ghazali, Zainuddin Sajuri, Mohd Zaidi Omar. (2013). Wear Behavior Of Copper-containing Ferritic Iron Under A Dry Sliding Condition. - Journal Of Zhejiang University - Science A. 14(14):906-914. |
| Anasyida Abu Seman, Abdul Razak Daud, Mariyam Jameelah Ghazali. (2013). Wear Behaviour Of Eutectic And Hypoeutectic Al-si-mg-ce Alloys. - Industrial Lubrication And Tribology. 65(2):135-140. |
| A. E. Ismail, A. K. Ariffin, S. Abdullah & M. J. Chazali. (2012). Stress Intensity Factors Under Combined Tension And Torsion Loadings. - Indian Journal Of Engineering & Materials Sciences. 19:5-16. |
| Shahrum Abdullah, Kamarul Ariffin Zakaria, Mariyam Jameelah Ghazali. (2012). Observation Of The Fatigue Crack Propagation Rate Of An Aluminum Alloy Specimen Under Fatigue Spectrum Loadings. - Materials Testing. 54(10):663-673. |
| A. E. Ismail, A. K. Ariffin, S. Abdullah And M. J. Ghazali. (2011). Off-set Crack Propagation Analysis Under Mixed Mode Loadings. - International Journal Of Automotive Technology. 12(2):225-232. |
| Noraiham Mohamad, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan Hj. Mohd And Che Husna Azhari. (2010). Correlation Of Filler Loading And Silane Coupling Agent On The Physical Characteristics Of Epoxidized Natural Rubber-alumina Nanoparticles Composites. - Journal Of Elastomers And Plastics. . |
| A.rajabi, Y.b. Kar, C. Doroody, T. S. Kiong, N.l A.arzaee, M. F. M. Noh, M.beygisangchin, M. Y. Ghotbi, M.nur E. Alam, H. Venu, M. Elahi M. Soudagar, N.asim, A.h. Baghdadi, M.j. Ghazali. (2024). Physiochemical And Electrical Activities Of Nano Copper Oxides Synthesised Via Hydrothermal Method Utilising Natural Reduction Agents For Solar Cell Application. - Nanotechnology Reviews. 1-10. |
| Sindhu Budati, Z. Leman, Mh Sulaiman, Ma Azmah Hanim And Mj Ghazali. (2023). An Investigation Into The Physical, Mechanical, Tribology, Thermal And Durability Performance Of Commercial Brake Material For Rail Transportation. - Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology. 1620-1631. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Mastura Mohammad Taha, Noor Irinah Omar. (2023). A Brief Overview Of The Marine Environmentally Friendly Anti-fouling Surface Strategy. - Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology. 1384-1393. |
| Haizum Aimi Zaharin, Mariyam Jameelah Ghazali, Mohammad Khalid, Thachnatharen Nagarajan, Wong Weng Pin, Farah Ezzah, Ong Gerard, Rashmi Walvekar And Abdul Khaliq Rasheed. (2023). Tribological, Oxidation And Thermal Analysis Of Advanced Microwave Hydrothermal Synthesised Ti3c2tx Mxene As Additives In Outboard Engine Oil. - Lubricants. 1-20. |
| Mariyam Jameelah Ghazali, Haizum Aimi Zaharin, Mohammad Khalid, Thachnatharen Nagarajan. (2023). Tribological Properties And Thermal Behaviour Of Ti3c2 Mxene As Anti-friction And Heat Transfer Additive In Outboard Engine Oil. - Jurnal Tribologi. 69-83. |
| Afida Jemat, Masfueh Razali, Yuichi Otsuka, Mariyam Jameelah Ghazali. (2023). Enhancement Of Human Gingival Fibroblasts Bioactivity And Proliferation On Plasma Sprayed Yttria-stabilised Zirconia/tio2 Surface Coating Of Titanium Alloys: An In-vitro Study. - Coatings. 1-13. |
| Alireza Doroudi, Hamid Omidvar, Ali Dastgheib, Mohammad Khorram, Armin Rajabi, Amir Hossein Baghdadi, And Mariyam Jameelah Ghazali. (2023). Effect Of Mbf-20 Interlayer On The Microstructure And Corrosion Behaviour Of Inconel 625 Super Alloy After Diffusion Brazing. - Materials. 1-18. |
| Dinesh Dhande, Shirish Navale, D.p. Gaikwad, D.v. Wadkar, S.r. Patil, R.d. Nalawade, Mariyam J. Ghazali, W.b. Wan Nik. (2023). Prediction Of Abrasive Wear Behavior Of The Poly-tetra-fluoroethylene Material Using Adaptive Neuro Fuzzy Interface Systems. - Jurnal Tribologi. 141-159. |
| H.n. Abu Bakar, J.a. Ghani, C.h. Che Haron, M.j. Ghazali , M.s. Kasim, S. Al-zubaidi, N. Jouini. (2023). Wear Mechanisms Of Solid Carbide Cutting Tools In Dry And Cryogenic Machining Of Aisi H13 Steel With Varying Cutting-edge Radius. - Wear. 1-8. |
| Nurulhuda Mohd, Masfueh Razali, Mariyam Jameelah Ghazali, Noor Hayaty Abu Kasim. (2022). Current Advances Of Three-dimensional Bioprinting Application In Dentistry: A Scoping Review. - Materials. 1-25. |
| Nurulhuda Mohd, Masfueh Razali, Mariyam Jameelah Ghazali, Noor Hayaty Abu Kasim. (2022). 3d-printed Hydroxyapatite And Tricalcium Phosphates-based Scaffolds For Alveolar Bone Regeneration In Animal Models: A Scoping Review. - Materials. 1-16. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Jariah Mohamad Juoi, Toibah Abd Rahim, Zaleha Mustafa. (2022). Plasma-sprayed Tio2 Coatings: Hydrophobicity Enhanced By Zno Additions. - International Journal Of Applied Ceramic Technology. 2213-2221. |
| Armin Rajabi, Peter Hodgson, Mariyam J. Ghazali, Zainuddin Sajuri, Alireza Almaslow, Hamid Ahmad Mehrabi, Amir Hossein Baghdadi. (2022). Challenges And Solutions In The Synthesis Of Nano-ticn: A Review. - Ceramic International. 8921-8929. |
| Nilofar Asim, Mohd Sukor Suait, Marzieh Badiei, Masita Mohammad, Md. Akhtaruzzaman, Armin Rajabi, Nowshad Amin And Mariyam Jameelah Ghazali. (2022). Perspectives In Biopolymer-graphene-based Composite Application: Advances, Challenges, And Recommendations. - Nanotechnology Reviews. 1525-1554. |
| Nilofar Asim , Marzieh Badiei, Masita Mohammad, Halim Razali , Armin Rajabi , Lim Chin Haw, Mariyam Jameelah Ghazali. (2022). Sustainability Of Heating, Ventilation And Air-conditioning (hvac) Systems In Buildings-an Overview. - International Journal Of Environmental Research And Public Health. 1-16. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Mohd Fadzli Bin Abdollah. (2022). Self-cleaning Plasma Sprayed Tio2 Coatings Modified By Laser Surface Texturing Process. - Junral Tribologi. 39-55. |
| M.a. Abdelgnei, M.z. Omar, M.j. Ghazali, M.n. Mohammed. (2022). Microstructure Evaluation And Mechanical Properties Of Thixoformed Al-5.7si-2cu-0.3mg Aluminum Alloys. - International Journal Of Metalcasting. 370-384. |
| Nabilah Ismail, Siti Mariana Mujad, Mohammad Fakhratul Ridwan Zulkifli, Vincent Onuegbu Izionworu, Mariyam Jameelah Ghazali, Wan Mohd Norsani Wan Nik. (2022). A Review On Application Of Marine Algae As Green Corrosion Inhibitors In Acid Medium. - Vietnam Journal Of Chemistry. 409-416. |
| Ahmad Afiq Pauzi, Mariyam Jameelah Ghazali, Wan Fathul Hakim W. Zamri. (2022). Wear Debris Analyses Of Nimonic 263 Under High Temperature Fretting Condition. - Jurnal Tribologi. 118-129. |
| Noor Khairin Mohd, Yeong Shoot Kian, Nor Azowa Ibrahim, Siti Mariam Mohd Nor, Wan Md Zin Wan Yunus, Mariyam Jameelah Ghazali, Lim Wen Huei. (2021). Corrosion Inhibition, Adsorption And Thermodynamic Properties Of Hydrophobic-tailed Imines On Carbon Steel In Hydrochloric Acid Solution: A Comparative Study. - Journal Of Adhesion Science And Technology. 2558-2579. |
| Mariyam J. Ghazali, Xu Ren, Armin Rajabi, Wan Fathul Hakim W. Zamr, Nadia Mohd Mustafah And Jing Ni. (2021). Finite Element Analysis Of Cushioned Diabetic Footwear Using Ethylene Vinyl Acetate Polymer. - Polymer. 1-12. |
| Isyraf Aznam, Joelle C.w. Mah, Andanastuti Muchtar, Mahendra R. Somalu, Mariyam J. Ghazali. (2021). Electrophoretic Deposition Of (cu,mn,co)3o4 Spinel Coating On Sus430 Ferritic Stainless Steel: Process And Performance Evaluation For Solid Oxide Fuel Cell Interconnect Applications. - Journal Of The European Ceramic Society. 1360-1373. |
| Elaine Zi Fan Soh, Ohnmar Htwe, Amaramalar Selvi Naicker, Armin Rajabi Nasirabadi, Mariyam Jameelah Ghazali, Nadia Mohd Mustafah, Irraivan Elamvazuthi, Brenda Saria Yuliawiratman, Manimalar Selvinaicker. (2020). Stepease Diabetic Socks: An Answer To Efficacious Indoor Foot Pressure Relief - A Prospective Study. - Journal Of Tissue Viability. 104-109. |
| Joelle Chia Wen Mah, Muhamad Isyraf Aznam, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2020). Cr Vaporisation And Oxidation Behaviour Of Sus430 Stainless Steel In The Simulated Cathodic Environment Of Solid Oxide Fuel Cells. - Malaysian Journal Of Microscopy. 124-132. |
| Ahmad Afiq Pauzi, Mariyam Jameelah Ghazali, Wan Fathul Hakim W. Zamri. (2020). Fretting Wear Properties Of Nimonic 263 At Elevated Temperatures. - Jurnal Tribologi. 1-14. |
| Ahmad Afiq Pauzi, Mariyam Jameelah Ghazali, Wan Fathul Hakim W. Zamri And Armin Rajabi. (2020). Wear Characteristics Of Superalloy And Hardface Coatings In Gas Turbine Applications - A Review. - Metals. 1-14. |
| Zahra Mahmoudi, Seyed Hadi Tabaian, Hamid Reza Rezaie, Farzad Mahboubi, Mariyam Jameelah Ghazali. (2020). Synthesis Of Ti2alc And Ti3alc2 Max Phases By Arc-pvd Using Tial Target In C2h2/ Ar Gas Mixture And Subsequent Annealing. - Ceramics International. 4968-4975. |
| M.a. Abdelgnei, M.z. Omar, M.j. Ghazali, M.n. Mohammed, B. Rashid. (2020). Dry Sliding Wear Behaviour Of Thixoformed Al-5.7si-2cu-0.3 Mg Alloys At High Temperatures Using Taguchi Method. - Wear. 1-12. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Yuichi Otsuka, Kiyoshi Ohnuma, Sarita Morakul, Susumu Nakamura, Mohd Fadzli Abdollah. (2020). Antibacterial Properties Of Laser Surface-textured Tio2/zno Ceramic Coatings. - Ceramics International. 3949-3959. |
| Siti Atiqa Al Zahra Mat Darus, Mariyam Jameelah Ghazali, Che Husna Azhari, Rozli Zulkifli, Ahmad Adlie Shamsuri. (2020). Mechanical Properties Of Gigantochloa Scortechinii Bamboo Particle Reinforced Semirigid Polyvinyl Chloride Composites. - Jurnal Teknologi. 15-22. |
| Armin Rajabi, Mariyam Jameelah Ghazali, Intan Fadhlina Mohamed, Norhamidi Muhamad. (2020). Novel Precursor Of Nitrogen For The Synthesis Of Tic0.7n0.3 Through Vacuum Oven-induced Combustion. - Ceramics International. 9271-9280. |
| Yusliza Yusuf, Mariyam Jameelah Ghazali, Yuichi Otsuka, Sarita Morakul, Susumu Nakamura, Kiyoshi Ohnuma, Mohd Fadzli Bin Abdollah. (2019). Wettability Characteristics Of Laser Surface Textured Plasma Sprayed Tio2/zno Coatings. - Tribology Online. 279-284. |
| Juyana Abdul Wahab, Mariyam Jameelah Ghazali. (2019). Erosion Resistance Of Laser Textured Plasma-sprayed Al2o3-13%tio2 Coatings On Mild Steel. - Wear. 2029-2037. |
| Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal, Talib Ria Jaafar, Mariyam Jameelah Ghazali, Che Hassan Che Haron. (2019). Surface Characterisation Of Ticxn1x Coatings Processed By Cathodic Arc Physical Vapour Deposition: Xps And Xrd Analysis. - Surface And Interface Analysis. 611-617. |
| Isyraf Aznam, Joelle Mah Chia Wen, Andanastuti Muchtar, Nurul Akidah Baharuddin, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2019). Kelakuan Pengoksidaan Keluli Tahan Karat Berferit Sus430 Dan Kesan Pemeruapan Spesies Cr Bergas Kepada Permukaan Katod Lscf Dalam Suhu Operasi Sel Fuel Oksida Pepejal. - Sains Malaysiana. 861-869. |
| Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal, Talib Ria Jaafar, Mariyam Jameelah Ghazali, Che Hassan Che Haron. (2019). The Study On The Properties Of Ticn Coatings Processed By Cathodic Arc Physical Vapour Deposition. - Tribology - Materials, Surfaces & Interfaces. 58-66. |
| Noor Faeizah Amat, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali, Norziha Yahaya. (2019). Effect Of Sintering Temperature On The Aging Resistance And Mechanical Properties Of Monolithic Zirconia. - Journal Of Materials Research Technology. 1092-1101. |
| Armin Rajabi, Mariyam Jameelah Ghazali, Ebrahim Mahmoudi, Amir Hossein Baghdadi, Abdul Wahab Mohammad, Nadia Mohd Mustafah, Htwe Ohnmar, Amaramalar Selvi Naicker. (2019). Synthesis, Characterization, And Antibacterial Activity Of Ag2o-loaded Polyethylene Terephthalate Fabric Via Ultrasonic Method. - Nanomaterials. 450-462. |
| Hasrawati Abu Hassan, Mariyam Jameelah Ghazali, Cevdet Meric, Che Husna Azhari. (2019). Wettability Effect Of The Surface Morphologies Of Musa Acuminata Leaves. - Bioresources. 8331-8344. |
| Muhammad Sufiyan Amril, Noor Faeizah Amat, Yew Hsu Zenn, Andanastuti Muchtar, Mariyam Jameelah Ghazali. (2019). Influences Of Oral Environment On Natural Enamel And Zirconia Crown: A Short Review. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 156-162. |
| Isyraf Aznam, Joelle Chia Wen Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2019). Review On Oxidation Behavior And Chromium Volatilization Of Fe-cr-based Interconnects At High Operation Temperatures Of Solid Oxide Fuel Cells. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 148-155. |
| A.rajabi, M.j. Ghazali, E. Mahmoudi, S. Azizkhani, N.h. Sulaiman, A.w. Mohammad, N.m. Mustafah, H. Ohnmar, A.s. Naicker. (2018). Development And Antibacterial Application Of Nanocomposites: Effects Of Molar Ratio On Ag2o-cuo Nanocomposite Synthesised Via The Microwave-assisted Route. - Ceramics International. 21591-21598. |
| Kin Yuen Leong, Idayu Razali, K.z. Ku Ahmad, Hwai Chyuan Ong, M.j. Ghazali, Mohd Rosdzimin Abdul Rahman. (2018). Thermal Conductivity Of An Ethylene Glycol/water-based Nanofluid With Copper-titanium Dioxide Nanoparticles: An Experimental Approach. - International Communications In Heat And Mass Transfer. 23-28. |
| Jumril Yunas, Noor Humam Sulaiman, And Mariyam Jameelah Ghazali. (2018). Synthesis Of Calcium Ferrite Nanoparticles (cafe2o4-nps) Using Auto-combustion Method For Targeted Drug Delivery. - Key Engineering Materials. . |
| Noor Faeizah Amat, Shari Lawuo Raji, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali, Norziha Yahaya. (2018). Influence Of Presintering Parameters On The Mechanical Properties Of Presintered Dental Zirconia Block. - International Journal Of Integrated Engineering. . |
| Isyraf Aznam, Joelle Chia Wen Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali.. (2018). A Review Of Key Parameters For Effective Electrophoretic Deposition In The Fabrication Of Solid Oxide Fuel Cells. - Journal Of Zhejiang University: Science A. . |
| Dinesh Ragurajan, Mohsen Golieskardi, Meenaloshini Satgunam, Md Enamul Hoque, Angela Min Hwei Ng, Mariyam Jameelah Ghazali, Ahmad Kamal Ariffin. (2018). Advanced 3y-tzp Bioceramic Doped With Al2o3 And Mno2 Particles Potentially For Biomedical Applications: Study On Mechanical And Degradation Properties. - Journal Of Materials Research And Technology. . |
| Isyraf Aznam, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali, Joelle Chia Wen Mah, Nurul Akidah Baharuddin. (2018). Interconnect Development For Solid Oxide Fuel Cell Application. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. . |
| A. Jemat, M.j. Ghazali, M. Razali, Y. Otsuka, A. Rajabi,. (2018). Effects Of Tio2 On Microstructural, Mechanical Properties And In-vitro Bioactivity Of Plasma Sprayed Yttria Stabilised Zirconia Coatings For Dental Application. - Ceramics International. 4271-4281. |
| Noor Faeizah Amat, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali And Norziha Yahaya. (2018). Preparation Of Presintered Zirconia Blocks For Dental Restorations Through Colloidal Dispersion And Cold Isostatic Pressing. - Ceramics International. 6409-6416. |
| M. A. Abdelgnei, M. Z. Omar, M. J. Ghazali, Mohamed A. Gebril And M. N. Mohammed. (2018). Dry Sliding Wear Behaviour Of Rheocast Al-5.7si-2cu-0.3mg Alloy. - International Journal Of Engineering & Technology. . |
| N.h. Sulaiman, M.j. Ghazali, J. Yunas, A. Rajabi, B.y. Majlis, M. Razali. (2018). Synthesis And Characterization Of Cafe2o4 Nanoparticles Via Co-precipitation And Auto-combustion Methods. - Ceramic International. 46-50. |
| Afida Jemat, Mariyam Jameelah Ghazali, Masfueh Razali, Yuichi Otsuka. (2018). Microstructural, Surface Roughness And Wettability Of Titanium Alloy Coated By Yzp/tio2 For Dental Application. - Jurnal Teknologi. . |
| Ahmad Afiq Pauzi, Salmi Mohd Yunus, Shuib Husin, Mariyam Jameelah Ghazali, Wan Fathul Hakim W Zamri. (2018). Wear Characteristics Of A Combustion Liner For Power Generation Gas Turbine. - International Journal Of Materials And Product Technology. . |
| Nidal Wanis Elshereksi, Mariyam Jameelah Ghazali, Andanastuti Muchtar & Che Husna Azhari. (2017). Review Of Titanate Coupling Agents And Their Application For Dental Composite Fabrication. - Dental Materials Journal. 539-552. |
| Khaled Salem Alhawari, Mohd Zaidi Omar, Mariyam Jameelah Ghazali, Mohd Shukor Salleh, Mohammed Naser Abdulrazaq. (2017). Effect Of Thixoforming On The Wear Properties Of Al-si-cu Aluminium Alloy. - Jurnal Teknologi. . |
| Armin Rajabi, Mariyam J. Ghazali. (2017). Quantitative Analyses Of Tic Nanopowders Via Mechanical Alloying Method. - Ceramics International. 14233-14242. |
| Nidal W. Elshereksi, Mariyam Jameelah Ghazali, Andanastuti Muchtar, Che Husna Azhari. (2017). Studies On The Effects Of Titanate And Silane Coupling Agents On The Performance Of Poly (methyl Methacrylate)/barium Titanate Denture Base Nanocomposites. - Journal Of Dentistry. 121-132. |
| Faraziah Hassan, Rozli Zulkifli, Mariyam Jameelah Ghazali, Che Husna Azhari. (2017). Kenaf Fiber Composite In Automotive Industry: An Overview. - International Journal On Advanced Science, Engineering And Information Technology. 315-321. |
| K.s. Alhawari, M.z. Omar, M.j. Ghazali, M.s. Salleh, M.n. Mohammed. (2017). Microstructural Evolution During Semisolid Processing Of Al-si-cu Alloy With Different Mg Contents. - Transactions Of Nonferrous Metals Society Of China. 1483-1497. |
| Joelle C.w. Mah, Andanastuti Muchtar, Mahendra R. Somalu, Mariyam J. Ghazali, Jarot Raharjo. (2017). Formation Of Sol-gel Derived (cu,mn,co)3o4 Spinel And Its Electrical Properties. - Ceramics International. 7641-7646. |
| Sh Hamdan, Wwf Chong, J-h Ng, Mj Ghazali, Rjk Wood. (2017). Influence Of Fatty Acid Methyl Ester Composition On Tribological Properties Of Vegetable Oils And Duck Fat Derived Biodiesel. - Tribology International. 76-82. |
| Ky Leong, Kz Ku Ahmad, Hwai Chyuan Ong, Mj Ghazali, Azizah Baharum. (2017). Synthesis And Thermal Conductivity Characteristic Of Hybrid Nanofluids: A Review. - Renewable & Sustainable Energy Reviews. 868-878. |
| Bushra Rashid, Mohammed Zulkiflle Leman, Mohammad Jawaid, Mariyam Jameelah Ghazali, Mohamad Ridzwan Ishak. (2017). Dynamic Mechanical Analysis Of Treated And Untreated Sugar Palm Fibre-based Phenolic Composites. - Bioresources. 3448-3462. |
| Mariyam Jameelah Ghazali, Ahmad Firdaus Shamsul Baharin, Juyana A Wahab, Andanastuti Muchtar. (2017). Erosive Wear Resistance Of Dimpled Ceramic Coatings On Mild Steels. - Industrial Lubrication And Tribology. 155-159. |
| Mohd,n K, Mariyam Jameelah Ghazali, Yeong Shoot Kian, Nor Azowa Ibrahim, Wan Md Zin Wan Yunus, Siti Mariam Mohd Nor, Zainab Idris. (2017). Corrosion Inhibition Of Mild Steel In Hydrochloric Acid Solution Using Fatty Acid Derivatives. - Journal Of Oil Palm Research. 97-109. |
| B Rashid, Z Leman, M Jawaid, Mj Ghazali, Mr Ishak, Ma Abdelgnei. (2017). Dry Sliding Wear Behavior Of Untreated And Treated Sugar Palm Fiber Filled Phenolic Composites Using Factorial Technique. - Wear. 26-35. |
| Joelle C.w. Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam J. Ghazali. (2017). Metallic Interconnects For Solid Oxide Fuel Cell: A Review On Protective Coating And Deposition Techniques. - International Journal Of Hydrogen Energy. 9219-9229. |
| J. A. Wahab,m. J. Ghazali, Z. Sajuri, Y. Otsuka, M. Jayaprakash, S. Nakamura, A. F. S. Baharin. (2017). Effects Of Micro-grooves On Tribological Behaviour Of Plasma-sprayed Alumina-13%titania Coatings. - Ceramic International. 6410-6416. |
| B Rashid, Z Leman, M Jawaid, Mj Ghazali, Mr Ishak. (2017). Effect Of Treatments On The Physical And Morphological Properties Of Spf/phenolic Composites. - Journal Of Natural Fibers. 1-13. |
| Bushra Rashid, Zulkiflle Leman, Mohammad Jawaid, Mariyam Jameelah Ghazali, Mohamad Ridzwan Ishak. (2017). Influence Of Treatments On The Mechanical And Thermal Properties Of Sugar Palm Fibre Reinforced Phenolic Composites. - Bioresources. 1447-1462. |
| Noor Faeizah Amat, Andanastuti Muchtar, Mariyam Jameelah Ghazali And Norziha Yahaya. (2017). Effect Of Ph Of Suspension And Mechanical Treatment On Nanosized Zirconia Dispersion. - Journal Of Mechanical Engineering. 10-19. |
| Mariyam Jameelah Ghazali, Hasrawati Abu Hassan, Che Husna Azhari, Fatma Azura Mamat. (2016). The Bio-adhesion Behaviour Of Banana Leaves As Soil Remover At Elevated Temperatures. - Tribology Online. 264-271. |
| Aa Pauzi, Mj Ghazali, S Mohd Yunus, Wfhw Zamri, Ch Azhari, S Husin. (2016). Wear Characteristics Of Commercial Gas Turbine Components. - Tribology - Materials, Surfaces & Interfaces. 82-85. |
| Bushra Rashid, Z. Leman, M. Jawaid, M. J. Ghazali, M. R. Ishak. (2016). Physicochemical And Thermal Properties Of Lignocellulosic Fiber From Sugar Palm Fibers: Effect Of Treatment. - Cellulose. 2905-2916. |
| K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh And M. N. Mohammed. (2016). Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic Al-si-cu Alloy With Different Amounts Of Magnesium. - Composite Interfaces. 519-531. |
| M.j. Ghazali, S.m. Forghani, N. Hassanuddin, A. Muchtar, A.r.daud. (2016). Comparative Wear Study Of Plasma Sprayed Tio2 And Al2o3-tio2 On Mild Steels. - Tribology International. 681-686. |
| J. A. Wahab, M. J. Ghazali, W. M. W. Yusoff And Z. Sajuri. (2016). Enhancing Material Performance Through Laser Surface Texturing: A Review. - Transactions Of The Imf. 193-198. |
| Ping Chuan Siow, Jaharah Abdul Ghani, Che Hassan Che Haron, Mariyam Jameelah Ghazali And Talib Ria Jaafar. (2016). Effect Of Carbon Content In Ticxn1x Coating On The Adhesivity Of Carbide Cutting Tools And Machining Performance. - Journal Of Material Research. 1880-1884. |
| Mohd Fadzli Bin Abdollah, Noritsugu Umehara, Mariyam Jameelah Binti Ghazali And Mohamed El Mansori. (2016). Introduction-advances And Challenges In Carbon-based Tribomaterials. - Journal Of Materials Research. 1. |
| Bushra Rashid, Zulkiflle Leman, Mohammad Jawaid, Mariyam Jameelah Ghazali And Mohamad Ridzwan Ishak. (2016). The Mechanical Performance Of Sugar Palm Fibres (ijuk) Reinforced Phenolic Composites. - International Journal Of Precision Engineering And Manufacturing. 1001-1008. |
| K. A. Zakaria, S. Abdullah & M. J. Ghazali. (2016). A Review Of The Loading Sequence Effects On The Fatigue Life Behaviour Of Metallic Materials. - Journal Of Engineering Science And Technology Review. 189-200. |
| Ahmad Firdaus Shamsul Baharin, Mariyam Jameelah Ghazali, Juyana A. Wahab. (2016). Laser Surface Texturing And Its Contribution To Friction And Wear Reduction: A Brief Review. - Industrial Lubrication And Tribology. 57-66. |
| D. Ragurajan, M. Satgunam, M. Golieskardi, A.k. Ariffin And M.j. Ghazali. (2016). Effect Of Air Sintering On Microstructural And Mechanical Properties Of Aluminum Oxide / Manganese Oxide Doped Y- Tzp. - Journal Of The Australian Ceramic Society. 128-133. |
| Salmi Mohd Yunus, Mariyam Jameelah Ghazali, Wan Fathul Hakim W Zamrib, Ahmad Afiq Pauzi, Shuib Husin. (2015). Characterisations Of Chromium Carbide-based Coated Combustor Liner For Gas Turbines. - Jurnal Teknologi. 33-36. |
| W.m.f Wan Mahmood, J.a. Ghani, N. Saibani, Z. Harun, A.b. Sulong, M.j. Ghazali, M.r.a. Mansor, S. Abdullah. (2015). Performance Of Undergraduate Students In Conducting Research In Two Engineering Programmes. - Journal Of Engineering Science And Technology. 52-60. |
| P.c. Siow, J.a. Ghani, R.j. Talib, M.j. Ghazali, C.h. Che Haron. (2015). Characterization Using Xps And Xrd Of Ti(c,n) Coating Properties For Cutting Tool Applications. - Interceram: International Ceramic Review. 287-290. |
| A. Jemat, M. J. Ghazali, M. Razali, And Y. Otsuka. (2015). Surface Modifications And Their Effects On Titanium Dental Implants. - Biomed Research International. 1-11. |
| H. M. Hajar, M.j. Suriani, M.g.m. Sabri, M.j. Ghazali And W. B. Wan Nik. (2015). Corrosion Performance Of Coating Thickness In Marine Environment. - Biosciences Biotechnology Research Asia. 71-76. |
| M.j. Ghazali, M. Daud, A. Muhammad, M.z. Omar, C.h. Azhari. (2015). Microstructure Analyses Of Malay Keris And Its Relation To Mechanical Properties. - Acta Physica Polonica A. 1358-1362. |
| N.h. Sulaimana, M.j. Ghazali, B.y. Majlis, J. Yunas And M. Razali. (2015). Superparamagnetic Calcium Ferrite Nanoparticles Synthesized Using A Simple Sol Gel Method For Targeted Drug Delivery. - Bio-medical Materials And Engineering. 103-110. |
| A. Rajabi, M.j. Ghazali, A.r. Daud. (2015). Effect Of Second Phase Morphology On Wear Resistance Of Fe-tic Composites. - Jurnal Tribologi. 1-9. |
| Rajabi A., Ghazali M.j., Daud A.r.. (2015). Chemical Composition, Microstructure And Sintering Temperature Modifications On Mechanical Properties Of Tic-based Cermet : A Review. - Materials & Design. 95-106. |
| Kai Yuan Theng, Andanastuti Muchtar, Norziha Yahaya And Mariyam Jameelah Ghazali. (2015). Development Of Translucent Zirconia For Dental Crown Applications. - Asian Journal Of Scientific Research. 342-350. |
| K.s. Alhawari, M.z. Omar, M.j. Ghazali, M.s. Salleh, M.n. Mohammed. (2015). Evaluation Of The Microstructure And Dry Sliding Wear Behaviour Of Thixoformed A319 Aluminium Alloy. - Materials And Design. 169-180. |
| Karim Z., Nuawi M.z., Ghani J.a., Ghazali M.j., Abdullah S., Mansor N.i.i.. (2015). Sliding Wear Evaluation Of Aluminum Alloy (7075-t6) On Hardened Steel (aisi4340) Via Non-contact Technique By I-kaz™ Multi-level Analysis. - Wear. 99-104. |
| Ismail A.e., Ariffin A.k., Abdullah S., Ghazali M.j.. (2014). Ungkapan Kamiran-j Retak Permukaan Pada Bar Silinder Padu Kenaan Beban Ragam I. - Jurnal Teknologi (sciences And Engineering). 7 - 17. |
| Theng Kai Yuan, Andanastuti Muchtar, Norziha Yahaya, Mariyam Jameelah Ghazali. (2014). Review On The Translucency Of Zirconia (y-tzp) Ceramics For Dental Crown Applications. - Australian Journal Of Basic And Applied Sciences. 252-257. |
| Afida Jemat, Mariyam Jameelah Ghazali, Masfueh Razali, Yuichi Otsuka. (2014). Effects Of Surface Treatment On Titanium For Dental Implants: A Review. - Australian Journal Of Basic And Applied Sciences. 131-133. |
| A. Rajabi, M.j. Ghazali, J. Syarif , A.r. Daud. (2014). Development And Application Of Tool Wear: A Review Of The Characterization Of Tic-based Cermets With Different Binders. - Chemical Engineering Journal. 255: 445-452. |
| Noor Faeizah Amat, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Norziha Yahaya. (2014). Suspension Stability And Sintering Influence On Yttria-stabilized Zirconia Fabricated By Colloidal Processing. - Ceramics International. 40(4):5413-5419. |
| K. A Zakaria, S. Abdullah, M. J. Ghazali, M. Z. Nuawi, S.m. Beden & Z. M. Nopiah. (2014). Fatigue Strain Signal Behaviour And Damage Assessment Of An Engine Mount Bracket. - Journal Of Scientific & Industrial Research. 73(2014):112-116. |
| S.m. Forghani, Mj Ghazali, A. Muchtar, A.r. Daud. (2014). Mechanical Properties Of Plasma Sprayed Nanostructured Tio2 Coatings On Mild Steel. - Ceramics International. 40 (2014):7049-7056. |
| Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar, And Che H. Azhari. (2014). Perspectives For Titanium-derived Fillers Usage On Denture Base Composite Construction: A Review Article. - Advances In Materials Science And Engineering. 1-13. |
| Ismail A.e., Ariffin A.k., Abdullah S., Ghazali M.j.. (2014). J-integral Evaluation Of Surface Cracks In Round Bar Under Mode Iii Loadings. - Research Journal Of Applied Sciences, Engineering And Technology. 1985 - 1993. |
| K.a. Zakaria, S. Abdullah, M.j. Ghazali. (2013). Comparative Study Of Fatigue Life Behaviour Of Aa6061 And Aa7075 Alloys Under Spectrum Loadings. - Materials And Design. 49:48-57. |
| K.a. Zakaria, S. Abdullah, M.j. Ghazali, C.h. Azhari. (2013). Influence Of Spectrum Loading Sequences On Fatigue Life In A High-temperature Environment. - Engineering Failure Analysis. 30:111-123. |
| S.m. Forghani, M.j. Ghazali, A. Muchtar, A.r. Daud, N.h.n. Yusoff, C.h. Azhari. (2013). Effects Of Plasma Spray Parameters On Tio2-coated Mild Steel Using Design Of Experiment (doe) Approach. - Ceramics International. 39(3):3121-3127. |
| A. Almaslow, M.j. Ghazali, R.j. Talib, C.t. Ratnam, C.h. Azhari. (2013). Effects Of Epoxidized Natural Rubber-alumina Nanoparticles (enran) Composites In Semi-metallic Brake Friction Materials. - Wear. 302:1392-1396. |
| N.h.n. Yusoff, M.j. Ghazali, M.c. Isa, A.r. Daud, A. Muchtar. (2013). Effects Of Powder Size And Metallic Bonding Layer On Corrosion Behaviour Of Plasma-sprayed Al2o3-13% Tio2 Coated Mild Steel In Fresh Tropical Seawater. - Ceramics International. 39(3):2527-2533. |
| Ping Chuan Siow, Jaharah A. Ghani, Mariyam Jameelah Ghazali, Talib Ria Jaafar, Mohamad Asri Selamat, Che Hassan Che Haron. (2013). Characterization Of Ticn And Ticn/zrn Coatings For Cutting Tool Application. - Ceramics International. 39(4):1293-1298. |
| Anasyida Abu Seman, Abdul Razak Daud, Mariyam Jameelah Ghazali. (2013). Wear Behaviour Of Eutectic And Hypoeutectic Al-si-mg-ce Alloys. - Industrial Lubrication And Tribology. 65(2):135-140. |
| Junaidi Syarif, Agung Iswadi, Mariyam Jameelah Ghazali, Zainuddin Sajuri, Mohd Zaidi Omar. (2013). Wear Behavior Of Copper-containing Ferritic Iron Under A Dry Sliding Condition. - Journal Of Zhejiang University - Science A. 14(14):906-914. |
| M.j. Ghazali, N.i.i. Mansor, M.z. Nuawi, J.a. Ghani. (2013). Facile Wear Failure Monitoring Of Commercial Bearing Alloys Using I-kaz Method. - Engineering Failure Analysis. 35:545-553. |
| A. Almaslow, C.t. Ratnam, M.j. Ghazali, R.j. Talib, C.h. Azhari. (2013). Effects Of Electron-beam And Sulfur Crosslinking Of Epoxidized Natural Rubber On The Friction Performance Of Semimetallic Friction Materials. - Composites Part B: Engineering. 54:377-382. |
| Noor Faeizah Amat, Andanastuti Muchtar, Norziha Yahaya, Mariyam Jameelah Ghazali. (2012). A Review Of Zirconia As A Dental Restorative Material. - Australian Journal Of Basic And Applied Sciences. 6(12):9-13. |
| A.f.a. Rasid, T.i. Mohamad, M.j. Ghazali And W.m.f.w. Mahmood. (2012). Effects Of Lubricant Temperature In A Motorized Engine. - World Applied Sciences Journal. 927-930. |
| A.e. Ismail, A.k. Ariffin, S. Abdullah, M.j. Ghazali. (2012). Stress Intensity Factors For Surface Cracks In Round Bar Under Single And Combined Loadings. - Meccanica. 47:1141-1156. |
| Herman Praktino, Mariyam Jameelah Ghazali, A.r. Daud. (2012). Effects Of Manganese Addition On Tensile Strength Of Aa6063 Alloy For Marine Application. - Jurnal Teknologi (sciences & Engineering). 59(2):87-89. |
| N.h.n. Yusoff, M.j. Ghazali, M.c. Isa, A.r. Daud, A. Muchtar, S.m. Forghani. (2012). Optimization Of Plasma Spray Parameters On The Mechanical Properties Of Agglomerated Al2o3-13%tio2 Coated Mild Steel. - Materials & Design. 39:504-508. |
| A. E. Ismail, A. K. Ariffin, S. Abdullah & M. J. Chazali. (2012). Stress Intensity Factors Under Combined Tension And Torsion Loadings. - Indian Journal Of Engineering & Materials Sciences. 19:5-16. |
| Shahrum Abdullah, Kamarul Ariffin Zakaria, Mariyam Jameelah Ghazali. (2012). Observation Of The Fatigue Crack Propagation Rate Of An Aluminum Alloy Specimen Under Fatigue Spectrum Loadings. - Materials Testing. 54(10):663-673. |
| Wan Nik, W.b., Zulkifli, M.f., Rosliza, R., Ghazali, M.j., Khaled, K.f.. (2011). Potential Of Honey As Corrosion Inhibitor For Aluminium Alloy In Seawater. - World Applied Sciences Journal. . |
| J.a. Ghani, M. Rizal, M.z. Nuawi, M.j. Ghazali, C.h.c. Haron. (2011). Monitoring Online Cutting Tool Wear Using Low-cost Technique And User-friendly Gui. - Wear. 271(9-10):2619? 2624. |
| Z. Karim, M.z. Nuawi, J.a. Ghani, S. Abdullah And M.j. Ghazali. (2011). Optimization Of Integrated Kurtosis-based Algorithm For Z-filter (i-kaz ) Tm Coefficient Using Multi Level Signal Decomposition Technique. - World Applied Sciences Journal. 14 (10): 1541-1548. |
| A. E. Ismail, A. K. Ariffin, S. Abdullah And M. J. Ghazali. (2011). Off-set Crack Propagation Analysis Under Mixed Mode Loadings. - International Journal Of Automotive Technology. 12(2):225-232. |
| Halina Misran, Ramesh Singh, Mariyam Jameelah Ghazali. (2011). Palm Oil Based Fatty Alcholos Templated Mesoporous Silica And Silica Spheres. - International Journal Of Nanoscience. 10(6):1275-1281. |
| N.h.n. Yusoff, M.j. Ghazali, M.c. Isa, A. Muchtar, S. M. Forghani. (2011). Effect Of Particle Size And Bonding Layer On Plasma Sprayed Al 2o 3-13%tio 2 Coatings. - International Journal Of Mechanical And Materials Engineering. 6(3):385-390. |
| M. J. Ghazali, S. E. Mat Kamal, S. Abdullah And H. Misran. (2011). Characterizations Of Cu-based Coated Al7075 Via Plasma-spray Method - A Wear Case Study. - International Journal Of Nanoscience. 10(6):1269-1274. |
| Ismail A.e., Ariffin A.k., Abdullah S., Ghazali M.j.. (2011). Probabilistic High Cycle Multiaxial Fatigue Analysis Using Finite Element Method. - Transactions Hong Kong Institution Of Engineers. 18(2):13-18. |
| A.j. Helmisyah, S. Abdullah, M.j. Ghazali. (2011). Structure Integrity Analysis Of Piston Crown Against Thermal Stress For Compressed Natural Gas Direct Injection Engine. - Engineering E-transaction. 6(2):169-174. |
| A.e.ismal, A.k.ariffin, S.abdullah Dan M.j.ghazali. (2010). Stress Intensity Factors For Surface Cracks In Round Bars Under Combined Bending And Torsion Loadings. - International Review Of Mechanical Engineering (ireme). 4(7):827-832. |
| Mohamad, N; Muchtar, A; Ghazali, Mj; Mohd, Dhj; Azhari, Ch. (2010). Epoxidized Natural Rubber-alumina Nanoparticle Composites: Optimization Of Mixer Parameters Via Response Surface Methodology. - Journal Of Applied Polymer Science. 115(1):183-189. |
| Noraiham Mohamad, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan Hj. Mohd And Che Husna Azhari. (2010). Correlation Of Filler Loading And Silane Coupling Agent On The Physical Characteristics Of Epoxidized Natural Rubber-alumina Nanoparticles Composites. - Journal Of Elastomers And Plastics. . |
| Anasyida A.s., Daud A.r., Ghazali M.j.. (2010). Dry Sliding Wear Behaviour Of Al-12si-4mg Alloy With Cerium Addition. - Materials And Design. 31(1):365-374. |
| Mj Ghazali, Mz Nuawi, Nii Mansor. (2009). Low Cost Wear Monitoring Of Bearing Shell In Connecting Rod Via I-kaz Method. - Advanced Materials Research. 76-78:702-707. |
| A. G. Jaharah, C. H. Che Hassan, M. J. Ghazali, A. B. Sulong, M. Z. Omar, M. Z.nuawi, A. R. Ismail. (2009). Performance Of Uncoated Carbide Cutting Tool When Machining Cast Iron In Dry Cutting Condition. - International Journal Of Modern Physics B. 23(6-7):1796-1802. |
| Sulong A.b., Muhamad N., Ghazali M.j., Jaharah A.g., Tan S.h., Park J.h.. (2009). Functionalized Mwcnts Reinforced Polyetehylene Fiber Composite: Mechanical Strength Characterization. - International Journal Of Modern Physics B. 23(6-7):1419-1424. |
| M. J. Ghazali, A. A. Pauzi, C. H. Azhari, J. A. Ghani, A. B. Sulong And R. Mustafa. (2009). Effect Of Starch Binders In Alumina Coatings On Aisi 316 L Stainless Steel For Medical Application. - International Journal Of Modern Physics B. 23(6-7):1034-1039. |
| Rozli Zulkifli, Che Husna Azhari, Maryam J. Ghazali, Ahmad Rasdan Ismail, Abu Bakar Sulong. (2009). Interlaminar Fracture Toughness Of Multi-layer Woven Silk/epoxy Composites Treated With Coupling Agent. - European Journal Of Scientific Research. 27(3):454-462. |
| N. I. I. Mansor, M. J. Ghazali, M. Z. Nuawi And S. E. M. Kamal. (2009). Monitoring Bearing Condition Using Airborne Sound. - International Journal On Mechanical And Materials Engineering. 4(2):152-155. |
| M. N. Wahab, A. R. Daud And M. J. Ghazali. (2009). Preparation And Characterization Of Stir Cast-aluminum Nitride Reinforced Aluminum Metal Matrix Composites. - International Journal Of Mechanical And Materials Engineering. 4(2):115-117. |
| K.m. Adel, A.s. Dhia And M.j. Ghazali. (2009). The Effect Of Laser Surface Hardening On The Wear And Friction Characteristics Of Acicular Bainitic Ductile Iron. - International Journal Of Mechanical And Materials Engineering (ijmme). 4(2):167-171. |
| Omar M.z., Atkinson H.v., Howe A.a., Palmiere E.j., Kapranos P., Ghazali M.j.. (2009). Solid-liquid Structural Break-up In M2 Tool Steel For Semi-solid Metal Processing. - Journal Of Materials Science. 44(3):869-874. |
| A. S. Anasyida, A. R. Daud And M. J. Ghazali. (2009). Dry Sliding Wear Behaviour Of Al-4si-4mg Alloys By Addition Of Cerium. - International Journal Of Mechanical And Materials Engineering (ijmme). 4(2):127-130. |
| M.j. Ghazali, W.m. Rainforth, M.z. Omar. (2008). A Comparative Study Of Mechanically Mixed Layers (mmls) Characteristics Of Commercial Aluminium Alloys Sliding Against Alumina And Steel Sliders. - Journal Of Materials Processing Technology. 201(1-3):662-668. |
| A. K. Ariffin, M. R. M. Akramin, S. Huzni, S. Abdullah And M. J. Ghazali. (2008). Probabilistic Analysis Of Cracked Structures With Uncertainty Parameters. - Advanced Materials Research. 33-37(1):223-228. |
| M.j. Ghazali, W.m. Rainforth, S. Abdullah, A.k.a. Ihsan & M. Hassan. (2008). Subsurface Deformation Of Worn Al-cu And Al-mg Alloys. - Advanced Materials Research. 33-37:483-488. |
| Noraiham Mohamad, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan Hj Mohd, Che Husna Azhari. (2008). The Effect Of Filler On Epoxidised Natural Rubber-alumina Nanoparticles Composites. - European Journal Of Scientific Research. 24(4):538-547. |
| M.j. Ghazali, J.a. Ghani, M.z. Omar. (2007). Plastic Deformation Characteristics Of Worn Precipitation-hardened Aluminium Alloys. - International Journal Of Mechanical & Materials Engineering. 2(2):125-129. |
| R. Fadhila, A.g. Jaharah, M.z. Omar, C.h.c. Haron, M.j. Ghazali, And C. H. Azhari. (2007). Austenite Formation Of Steel-3401 Subjected To Rapid Cooling Process. - Int. J Of Mech And Material. 2(2):150-153. |
| Abdul Khaliq Rasheed*, Mohammad Khalid, Ariff Farhan Bin Mohd Nor, Wai Yin Wong, Tuerxun Duolikun, Varun Natu, Michel. W. Barsoum, Bey Fen Leo, Haizum Aimi Zaharin, Mariyam Jameelah Ghazali. (2020). Mxene-graphene Hybrid Nanoflakes As Friction Modifiers For Outboard Engine Oil. - Iop Conf. Series: Materials Science And Engineering. 1-11. |
| Huda Muhamad Badri, Nor Kamaliana Khamis, Mariyam Jameelah Ghazali. (2020). A Framework For Developing Lot-sizing And Scheduling Model For Multiproduct. - Iop Conf. Series: Materials Science And Engineering. 01209. |
| J. A. Wahab, M. J. Ghazali And M. N. Derman. (2020). Corrosion Resistance Of Micro-textured Surface Modified Aluminatitania Coating. - Iop Conf. Series: Materials Science And Engineering. 2186-2194. |
| M.a. Abdelgnei, M.z. Omar And M.j. Ghazali. (2018). Wear Properties Of Thixoformed Ai-5.7si-2cu-o.3mg Aluminium Alloy. - 15th International Conference On Semi-solid Processing Of Alloys And Composites. . |
| Juyana A Wahab Mariyam Jameelah Ghazali And Ahmad Firdaus Shamsul Baharin. (2017). Microstructure And Mechanical Properties Of Plasma Sprayed Al2o3-13%tio2 Ceramic Coating. - Matec Web Of Conferences- Encon 2017. 1-5. |
| Hasrawati Abu Hassan, Mariyam Jameelah Ghazali , Che Husna Azhari And Cevdet Meric. (2017). Microstructural Effects Of Banana Leaf On Adhesion And Self Cleaning Behaviour. - Matec Web Of Conferences - Encon 2017. 1-4. |
| Nh. Sulaiman, Mj. Ghazali, By. Majlis, J. Yunas, M. Razali. (2016). Influence Of Polyvinylalcohol On The Size Of Calcium Ferrite Nanoparticles Synthesized Using A Sol-gel Technique. - Ifmbe Proceedings Of International Conference For Innovation In Biomedical Engineering And Life Sciences. 198-202. |
| Chin Chuin Hao, Andanastuti Muchtar, Noor Faeizah Amat, Mariyam Jameelah Ghazali, Norziha Yahaya. (2014). Influence Of Sintering Temperature On The Translucency Of Sintered Zirconia By Cold Isostatic Pressing. - Advanced Materials Research, Trans Tech Publications, Switzerland. . |
| Noor Faeizah Amat, Andanastuti Muchtar, Norziha Yahaya, Mariyam Jameelah Ghazali, Chin Chuin Hao. (2014). Comparison Between Slip Casting And Cold Isostatic Pressing For The Fabrication Of Nanostructured Zirconia. - Advanced Materials Research, Trans Tech Publications, Switzerland. . |
| Zambri Harun, Muhammad Syafiq, Mohd Rasidi Rasani, Shahrum Abdullah, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mariyam Jameelah Ghazali, Che Husna Azhari, Mohd Radzi Abu Mansor, Zulkhairi, Ashraf. (2014). Skin Friction Coefficient And Boundary Layer Trend On Ukm Aster I-bond. - Applied Mechanics And Materials. 450-455. |
| Theng Kai Yuan, Andanastuti Muchtar, Mohamed Aboras, Norziha Yahaya, Mariyam Jameelah Ghazali. (2014). Properties And Survival Rate Of All Ceramics Dental Crown: A Review. - Applied Mechanics And Materials, 4th Mechanical And Manufacturing Engineering, Trans Tech Publication, Switzerland. . |
| Noor Faeizah Amat, Andanastuti Muchtar, Norziha Yahaya And Mariyam Jameelah Ghazali. (2013). Effect Of Dispersant Agent Amount In Colloidal Processing Of Zirconia Dental Ceramic. - Advanced Materials Research. . |
| Helmisyah Ahmad Jalaludin, Shahrir Abdullah, Mariyam Jameelah Ghazali, Bulan Abdullah, Nik Rosli Abdullah. (2013). Effect Of Extreme Temperatures On Coated Piston Crown For Cngdi Engine. - Applied Mechanics And Materials - International Conference On Advances In Mechanical Engineering 2013. . |
| Helmisyah Ahmad Jalaludin,*, Shahrir Abdullah, Mariyam Jameelah Ghazali, Bulan Abdullah, Nik Rosli Abdullah. (2013). Experimental Study Of Ceramic Coated Piston Crown For Compressed Natural Gas Direct Injection Engines. - Procedia Engineering - The Malaysian International Tribology Conference (mitc2013). . |
| Noor Faeizah Amat, Andanastuti Muchtar, Norziha Yahaya And Mariyam Jameelah Ghazali. (2013). Effect Of Sintering Temperature On The Mechanical Properties Of Nanostructured Zirconia Fabricated Via Colloidal Processing. - Advanced Materials Research. . |
| A.s. Anasyida, H. Zuhailawati, A.r. Daud, M.j. Ghazali. (2013). Characterisation Of Phases And Lattice Parameter In Eutectic And Hypoeutectic Al-si-mg- Ce Cast Alloy. - Advanced Materials Research, Trans Tech Publications, Switzerland.. . |
| Z. Karim, M.z. Nuawi, J.a. Ghani, S. Abdullah And M.j. Ghazali. (2012). Wear Monitoring Of Connecting Rod Bearing Via Air-borne Method Analyzed By Using I-kaz Tm Multi Level Value. - 14th International Conference On Advances In Materials And Processing Technologies, Ampt 2011;istanbul (advanced Materials Research). . |
| Zakaria, K.a., Abdullah, S., Ghazali, M.j., Azhari, C.h.. (2012). Elevated Temperature Fatigue Fracture Behaviour Of Aluminium Alloy Subjected To Spectrum Loadings. - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). . |
| Ismail A.e., Ariffin A.k., Abdullah S., Ghazali M.j., Abdulrazzaq M.. (2011). Finite Element Analysis On The Stress Intensity Factor Under Combined Bending And Torsion Loading. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur (key Engineering Materials). . |
| A.e. Ismail, A.k. Ariffin, S. Abdullah, M.j. Ghazali, R. Daud, M. Abdulrazzaq And A. Zulkifli. (2011). J-integral Analysis Of Surface Cracks In Round Bars Under Tension Loadings. - 2011 1st International Conference On Mechanical Engineering, Icme 2011; Phuket (applied Mechanics And Materials). . |
| Mahamad Noor Wahab, Mariyam Jameelah Ghazali, Abdul Razak Daud. (2011). Effect Of Aging Treatment On Microstructure And Mechanical Properties Of Al-si Matrix Alloy Reinforced With High Purity Aluminium Nitride (ain). - Source: Fracture And Strength Of Solids Vii, Pts 1 And 2 Book Series: Key Engineering Materials. . |
| A.j. Helmisyah, S. Abdullah And M.j. Ghazali. (2011). Effect Of Thermal Barrier Coating On Piston Crown For Compressed Natural Gas With Direct Injection Engine. - 2011 1st International Conference On Mechanical Engineering, Icme 2011(applied Mechanics And Materials); Phuket. . |
| A. E. Ismail, A. K. Ariffin, S. Abdullah. M. J. Ghazali And R. Daud. (2011). J-integral Analysis Of Surface Cracks In Round Bars Under Bending Moments. - 2011 1st International Conference On Mechanical Engineering, Icme 2011; Phuket (applied Mechanics And Materials). . |
| S.e. Mat Kamal, M.j. Ghazali And S. Abdullah. (2011). Effect Of Plasma Spray Variables On Cu-ni Coated A7075. - Feofs2010 - 8th International Conference On Fracture And Strength Of Solids 2010 (key Engineering Materials) ; Kuala Lumpur. . |
| N. Hassanuddin, M.j. Ghazali, A. Muchtar, M.c. Isa And A.r. Daud. (2011). Effects Of Al2o3-13%tio2 Coating Particle Size On Commercial Mild Steel Via Plasma Spray Method. - 8th International Conference On Composite Science And Technology, Iccst8 (key Engineering Materials); Kuala Lumpur. . |
| M.j. Ghazali, S.e. Mat Kamal And S. Abdullah. (2011). Characterisations Of Cu-based Coated Al7075 Via Plasma-spray Technique. - 8th International Conference On Fracture And Strength Of Solids 2010, Feofs2010; Kuala Lumpur(fracture And Strength Of Solids Vii, Pts 1 And 2). . |
| K.a.zakaria, S. Abdullah, M.j. Ghazali, M.z.nuawi, M.m.padzi. (2011). Fatigue Damage Assessment Of The Engine Mount Bracket Using A Statistical Based Approach. - 2nd International Conference On Manufacturing Science And Engineering, Icmse 2011; Guilin (advanced Materials Research). . |
| A.e Ismail, A.k Ariffin, S. Abdullah, M.j Ghazali And R. Daud. (2011). J-integral Analysis Of Surface Cracks In Round Bars Under Combined Loadings. - 2011 International Conference On Key Engineering Materials, Ickem 2011; Sanya (advanced Materials Research). . |
| A.e Ismail, A.k Ariffin, S. Abdullah, M.j Ghazali And R. Daud. (2011). Mode Iii Stress Intensity Factors Of Surface Crack In Round Bars. - 2011 International Conference On Key Engineering Materials, Ickem 2011; Sanya(advanced Materials Research). . |
| M.n. Wahab, M.j. Ghazali And A.r. Daud. (2011). Effect Of Aluminum Nitride (aln) Addition On Wear And Mechanical Properties Of Al-si Alloy Composites Fabricated By Stir Casting Process. - Source: Fracture And Strength Of Solids Vii, Pts 1 And 2 Book Series: Key Engineering Materials. . |
| Ismail, A.e., Ariffin, A.k., Abdullah, S., Ghazali, M.j.. (2011). Probabilistic Assessments Of The Plate Using Monte Carlo Simulation. - Conference On Advanced Materials And Nanotechnology, Caman 2009 (iop Conference Series: Materials Science And Engineering); Kuala Lumpur. . |
| K.a. Zakaria, S. Abdullah & M. J. Ghazali. (2010). The Study Of Fatigue Crack Propagation In Metal Using Finite Element Analysis. - Proceedings Of 8th International Conference On Fracture & Solids 2010, Kuala Lumpur (key Engineering Materials). . |
| I. Agung, J. Syarif, M.j. Ghazali & Z. Sajuri. (2010). Effect Of Cu Particles Precipitation On Wear Behaviour Of Fe-3wt% Cu Under Dry Sliding Condition. - Proc. Of 8th International Conference On Fracture & Strength Of Solids 2010, Kuala Lumpur. . |
| N. Hassanuddin, M. J. Ghazali, A. Muchtar, M. C. Isa & A. R. Daud. (2010). Effects Of Al2o3-13%tio2 Coating Particle Size On Commercial Mild Steel Via Plasma Spray Method. - 8th International Conference On Fracture & Strength Of Solids 2010. . |
| Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, Mariyam Jameelah Ghazali, And Mohd Nizam Ab Rahman. (2010). Online Cutting Tool Wear Monitoring Using I-kaz Method And New Regression Model. - Advanced Materials Research. . |
| Halina Misran, A. M. Aminuddin, F. A. M. Zini, M. J. Ghazali, And S. Ramesh. (2010). Facile Synthesis And Characterizations Of Mof-5 Coordination Polymer With Various Metal Linker Ratios For Ammonia Gas Storage. - American Institute Of Physics -international Conference On Advanced In Materials On Processing And Technologies (ampt2010). . |
| Mariyam Jameelah Ghazali, Mahamad Noor Wahab, Abdul Razak Daud And Jaharah Ab. Ghani. (2010). Effect Of Aged Ain Reinforced Al-si Alloys On Dry Sliding Wear Behaviour. - Advanced Materials Research. . |
| N. H. Yusoff, M. J. Ghazali, M. C. Isa, A. R. Daud, A. Muchtar, And S. Forghani. (2010). Characterisations Of Al2o3-13% Wt Tio2 Deposition On Mild Steel Via Plasma Spray Method. - American Institute Of Physics. . |
| M.j. Ghazali, W.m. Rainforth, H. Jones. (2005). Dry Sliding Wear Behaviour Of Some Wrought, Rapidly Solidified Powder Metallurgy Aluminium Alloys. - Wear. . |
| Yusliza Yusuf & Mariyam Jameelah Ghazali. (2022). Salutan Anti Kotoran Dalam Dunia Marin. - . 147. |
| Juyana A. Wahab, Mariyam Jameelah Ghazali. (2021). Kesan Tekstur Dalam Struktur Marin. - . 135. |
| Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar, Che H. Azhari. (2021). Advanced Aspects Of Engineering Research Vol. 2. - . 20. |
| Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar And Che H. Azhari. (2021). Highlights On Medicine And Medical Science Vol. 18. - . 21. |
| A. Almaslow, M.j. Ghazali, C.t. Ratnam, R.j. Talib, C.h. Azhari. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 27. |
| Noor Faeizah Amat, Andanastuti Muchtar, Norziha Yahaya, Mariyam Jameelah Ghazali. (2017). Advances In Materials Processing And Integrity Non-metals And Hybrids. - . 23. |
| Mariyam Jemeelah Ghazali, Mohd Zaidi Omar, Che Husna Azhari, Kamarul Afizi Kosman & Shahril Mohamad. (2016). Teknologi Di Alam Melayu. - . 9. |
| Mariyam Jameelah Ghazali, Che Husna Azhari, Wan Mokhtar Wan Yusoff, Kamarul Ariffin Kosman & Rosdan Abdul Manan. (2015). Ensiklopedia Kejuruteraan Alam Melayu. - . 322. |
| Mariyam Jameelah Ghazali. (2015). Ensiklopedia Kejuruteraan Alam Melayu. - . 253-257. |
| Che Husna Azhari, Mariyam Jameelah Ghazali, Andanastuti Muchtar, Mohd Zaidi Omar. (2014). Advances In Materials Processing. - . 307. |
| M. J. Ghazali. (2011). Effects Of Dry Sliding Wear Of Wrought Al-alloys On Mechanical Mixed Layers (mml). - . 13/12. |
| Mj Ghazali, Mz Omar & A Jalar. (2009). Sains Dan Teknologi Alam Melayu. - . 384. |
| Che Husna Azhari, Andanastuti Muchtar, Mohd Zaidi Omar, Mariyam Jameelah Ghazali. (2009). Advances In Materials Processing Volume 2. - . 340. |
| Mariyam Jameelah Ghazali. (2009). Advances In Materials Processing Vol 2. - . 35-70. |
| Noraiham Mohamad, Jeefferie Abd Razak, Hairul Effendy Ab Maulod, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan Hj. Mohd, Che Husna Azhari. (2022). Mineral-filled Polymer Composites. - . 36. |
| Mir Irfan Ul Haq, Ankush Raina, Mariyam Jameelah Ghazali, Mohd Javaid, Abid Haleem. (2021). Tribology Of Polymer And Polymer Composites For Industry 4.0. - . 22. |
| Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar, Che H. Azhari. (2021). Advanced Aspects Of Engineering Research Vol. 2. - . 20. |
| Nidal W. Elshereksi, Mariyam J. Ghazali, Andanastuti Muchtar And Che H. Azhari. (2021). Highlights On Medicine And Medical Science Vol. 18. - . 21. |
| A. Almaslow, M.j. Ghazali, C.t. Ratnam, R.j. Talib, C.h. Azhari. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 27. |
| A. Rajabi & M.j. Ghazali. (2017). Advances In Materials Processing And Integrity Non-metals And Hybrids. - . 14. |
| H.a. Hassan, M.j. Ghazali, C.h. Azhari & I.c. Gebeshuber. (2017). Advances In Materials Processing And Integrity Non-metals And Hybrids. - . 15. |
| Noor Faeizah Amat, Andanastuti Muchtar, Norziha Yahaya, Mariyam Jameelah Ghazali. (2017). Advances In Materials Processing And Integrity Non-metals And Hybrids. - . 23. |
| Mariyam Jemeelah Ghazali, Mohd Zaidi Omar, Che Husna Azhari, Kamarul Afizi Kosman & Shahril Mohamad. (2016). Teknologi Di Alam Melayu. - . 9. |
| Mariyam Jameelah Ghazali. (2015). Ensiklopedia Kejuruteraan Alam Melayu. - . 253-257. |
| A.j Helmisyah, S. Abdullah & M.j Ghazali. (2014). Advances In Materials Processing Vol. 3. - . Chapter 10 : 212-249. |
| Mariyam Jameelah Ghazali, Mohd Zaidi Omar, Che Husna Azhari, Kamarul Afizi Kosman Dan Shahril Mohamad. (2012). Sains Dan Teknologi Di Alam Melayu. - . 153-161. |
| M. J. Ghazali. (2011). Effects Of Dry Sliding Wear Of Wrought Al-alloys On Mechanical Mixed Layers (mml). - . 13/12. |
| Mj Ghazali, Mz Omar & A Jalar. (2009). Sains Dan Teknologi Alam Melayu. - . 384. |
| Mariyam Jameelah Ghazali. (2009). Advances In Materials Processing Vol 2. - . 35-70. |
| Yusliza Yusuf & Mariyam Jameelah Ghazali. (2022). Salutan Anti Kotoran Dalam Dunia Marin. - . 147. |
| Juyana A. Wahab, Mariyam Jameelah Ghazali. (2021). Kesan Tekstur Dalam Struktur Marin. - . 135. |
| Sarani Zakaria, Andanastuti Muchtar, Aisyah Abdul Rahman, Wan Hanna Melini Wan Mohtar, Babul Airianah Othman, Norazlin Hassim, Abdul Munir Abd. Murad,. (2021). Peraturan-peraturan Universiti Kebangsaan Malaysia (pengajian Siswazah) 2021. - . 57. |
| Mariyam Jameelah Ghazali, Che Husna Azhari, Wan Mokhtar Wan Yusoff, Kamarul Ariffin Kosman & Rosdan Abdul Manan. (2015). Ensiklopedia Kejuruteraan Alam Melayu. - . 322. |
| Che Husna Azhari, Mariyam Jameelah Ghazali, Andanastuti Muchtar, Mohd Zaidi Omar. (2014). Advances In Materials Processing. - . 307. |
| Che Husna Azhari, Andanastuti Muchtar, Mohd Zaidi Omar, Mariyam Jameelah Ghazali. (2009). Advances In Materials Processing Volume 2. - . 340. |
| M.j. Ghazali, A. Muchtar, T.i. Mohamad, W.a.w. Ghopa, W.f.h.w. Zamri, M.f.m. Tahir, M.a.m. Sabri, H. Hishamuddin, Z. Wahid, N.k. Khamis. (2009). Annual Report 08 Department Of Mechanical & Materials Engineering. - . 75. |
| Mariyam Jameelah Ghazali, Baba Md Deros, Badariah Bais, Dzuraidah Abd Wahab, Fatihah Suja`, Huda Abdullah, Jamaliah Md Jahim. (2008). Proceedings Of Engineering Postgraduate Conference 2008. - . 74. |
| Wan Fathul Hakim W Zamri, Mariyam Jameelah Ghazali, Zambri Harun, Rizauddin Ramli, Nuryazmin Ahmat Zainuri. (2023). Transformasi Rubrik Penilaian Pembentangan Pelajar Melalui Pengenalan Sistem Pengesanan Emosi. - Persidangan Penyelidikan Pendidikan Kejuruteraan Dan Alam Bina 2023 (peka 2023). 1-18. |
| Wan Fathul Hakim W Zamri, Nuryazmin Ahmat Zanuri, Mariyam Jameelah Ghazali, Wan Aizon W Ghopa, Muhamad Faiz Md Din. (2023). Sistem Ujian Pengesanan Emosi Melalui Ekspresi Muka Sebagai Rubrik Penilaian Alternatif Pembentangan Pelajar Bagi Meningkatkan Keterampilan Peribadi. - Kongres Dan Pertandingan Inovasi Dalam Pengajaran Dan Pembelajaran (knovasi) 2023. 1-20. |
| Masfueh Binti Razali;mariyam Jameelah Binti Ghazali;farinawati Binti Yazid;nurulhuda Binti Mohd. (2022). Innovative Three-dimensional (3d) Construct Of Hybrid Biomaterial Scaffold For Bone Regeneration: Bioengineering Of Suitable Injectable Bio-inks For Bioprinting Technology. - . . |
| Intan Fadhlina Binti Mohamed;ahmad Kamal Ariffin Bin Mohd Ihsan;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;wan Fathul Hakim Bin W. Zamri. (2022). Extra Superplasticity Of Aa2618 Alloy Processed By High-pressure Torsion. - . . |
| Wan Fathul Hakim Bin W. Zamri;mariyam Jameelah Binti Ghazali;mohd Faizal Bin Mat Tahir;abdul Hadi Bin Azman;intan Fadhlina Binti Mohamed. (2022). Sifat Mekanik, Prestasi Dan Mod Kegagalan Salutan Berlapis Pada Gelang Omboh. - . . |
| Akmal Azman, Mior Muhammad Akmal Mior Muhammad Jamil, Masfueh Razali, Nurulhuda Mohd, Mariyam Jameelah Ghazali. (2021). Physical Characterisation Of Injectable Bone Graft With Addition Of Hydroxyapatite And Hyaluronic Acid For 3d Bioprinting. - Faculty Of Dentistry Ukm Research And Innovation Symposium 3.0. 39. |
| Akmal Azman, Mior Muhammad Akmal Mior Muhammad Jamil, Masfueh Razali, Nurulhuda Mohd, Mariyam Jameelah Ghazali. (2021). Physical Characterization Of Hydroxyapatite-based Bio-ink For Three Dimensional Bioprinting. - 13th National Dental Students' Scientific Conference. 84. |
| Mariyam Jameelah Binti Ghazali;mohammad Rasidi Bin Mohammad Rasani;wan Fathul Hakim Bin W. Zamri;intan Fadhlina Binti Mohamed;armin Rajabi Nasirabadi. (2021). Wear Analyses Of Thermal Sprayed Tic/crc Coated Nickel Based Superalloys In Gas Turbines.. - . . |
| Andanastuti Muchtar;mariyam Jameelah Binti Ghazali;mahendra Rao A/l Somalu;lim Kean Long. (2021). Inter-diffusion And Oxidation Behaviour Between (cu,mn,co)3o4 Spinel Coated Ferritic Stainless Steel Interconnect And Cathode Material . - . . |
| Mariyam Jameelah Binti Ghazali;norhamidi Bin Muhamad;intan Fadhlina Binti Mohamed. (2021). Facile In-situ Casting Technique Of Fe-tic For Industries. - . . |
| Mariyam Jameelah Ghazali. (2021). Inovasi Sukan Berbasikal Tingkat Kualiti Hidup. - Berita Harian. 1. |
| Zainuddin Bin Sajuri;che Husna Bt. Azhari;andanastuti Muchtar;rozli Bin Zulkifli;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;intan Fadhlina Binti Mohamed. (2020). Development Of Light Weight Materials For Ballistic Applications In Tropical Climates. - . . |
| Shahrir Bin Abdullah;yusoff Bin Ali;rozli Bin Zulkifli;taib Iskandar Bin Mohamad;azli Bin Arifin;elankovan A/l A Sundararajan;mohammad Khatim Bin Hasan;mariyam Jameelah Binti Ghazali;azhari Bin Shamsudeen. (2019). Computationally Optimised Fuel-efficient Concept Car. - . 1-8. |
| Dr Masfueh Bt Razali, Prof. Dr. Andanastuti Muchtar, Prof. Dr. Mariyam Jemilah Bt Ghazali, Prof. Madya Dr. Syarif Junaidi Bin Sjarifuddin Djalil. (2019). Kajian Cytotoxic Titanium Aloi Baru Pada Sel Fibroblas Gingiva Manusia. - . 1-6. |
| Mariyam Jameelah Binti Ghazali;mohammad Rasidi Bin Mohammad Rasani. (2019). Pembangunan Sarung Kaki Bertekanan Teragih Untuk Pesakit Diabetik Di Malaysia. - . . |
| J.c.w Mah, I. Aznam, A. Muchtar, M.r. Somalu And M.j. Ghazali. (2019). Cr Vaporisation And Oxidation Behaviour Of Sus430 Stainless Steel In The Simulated Cathodic Environment Of Solid Oxide Fuel Cells. - 28th Scientific Conference Of The Microscopy Society Malaysia (28th Scmsm 2019). OPS35. |
| Joelle Cw Mah, Isyraf Aznam, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2019). Electrophoretic Deposition Of (cu,mn,co)3o4 Spinel Layer On Ferritic Stainless Steel. - Symposium On Fuel Cell And Hydrogen Technology. 1. |
| J.c.w Mah, I. Aznam, A. Muchtar, M.r. Somalu And M.j. Ghazali. (2019). Effects Of Citric Acid To Metal Cations Ratio In Synthesizing (cu,mn,co)3o4 Spinel Powders. - 28th Scientific Conference Of The Microscopy Society Malaysia (28th Scmsm 2019). OPS6. |
| Isyraf Aznam, Joelle Cw Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2019). Influence Of Suspension Stability And Process Parameter On Electrophoretic Deposition Of (cu,mn,co)3o4 Onto Sus430 Ferritic Stainless Steel. - Symposium On Fuel Cell And Hydrogen Technology 2019. 1. |
| Jumril Yunas;burhanuddin Bin Yeop Majlis;mariyam Jameelah Binti Ghazali;dee Chang Fu. (2018). Investigation Of Synthesized Nanostructure And Superparamagnetic Property Of Calcium Ferrite Nanoparticles For Targeted Drug Delivery Application.. - . . |
| Noor Faeizah Amat, Shari Lawuo Raji, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali & Norziha Yahaya. (2018). Influence Of Presintering Parameters On The Mechanical Properties Of Presintered Dental Zirconia Block. - International Conference On Mechanical And Manufacturing Engineering 2018 (icme 2018). . |
| Isyraf Aznam, Joelle Cw Mah, Andanastuti Muchtar, Mahendra Rao Somalu & Mariyam Jameelah Ghazali. (2018). Review On The Oxidation Behavior And Chromium Volatilization Of Fe-cr Based Interconnects At High Operation Temperatures Of Solid Oxide Fuel Cells. - International Conference On Mechanical And Manufacturing Engineering 2018 (icme 2018). . |
| Mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;zainuddin Bin Sajuri;wan Aizon Bin W Ghopa. (2018). Thixoforming Of Novel Aluminium Alloys. - . . |
| Muhammad Sufiyan Amril, Noor Faeizah Amat, Yew Hsu Zenn, Mariyam Jameelah Ghazali & Andanastuti Muchtar. (2018). Influence Of Oral Ph On Natural Enamel And Zirconia Crown: A Short Review. - International Conference On Mechanical And Manufacturing Engineering 2018 (icme 2018). . |
| Joelle C Mah, Isyraf Aznam, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali, Nurul Akidah Baharuddin. (2018). Electrophoretic Deposition In Solid Oxide Fuel Cells: A Short Review. - International Conference On Sustainable Energy And Green Technology (segt 2018). . |
| Andanastuti Muchtar;mariyam Jameelah Binti Ghazali;mahendra Rao A/l Somalu;edy Herianto. (2018). Feasibility Of Electrophoretically Depositing Cu-mco On Ferritic Stainless Steel Interconnects. - . . |
| M.j. Ghazali, A. Rajabi, N.m. Mustafah, Ohnmar Htwe, S.u.m. Radzwan. (2017). Stepease Tm : Towards Pressure Distribution Efficiency. - Invention, Innovation & Design Exposition 2017. . |
| Mariyam Jameelah Ghazali, Che Husna Azhari, Wan Ikhlas Wan Mohtar, Sharir Izzuan Amir. (2017). Bedil Alam Melayu. - Sari Penyelidikan. 69. |
| Joelle C.w. Mah, Andanastuti Muchtar, Mahendra R. Somalu, Mariyam J. Ghazali. (2017). Influences Of Sintering Temperature On The Phase Transition Behavior And Electrical Properties Of Sol-gel Derived (cu,mn,co)3o4 Spinels. - 6th International Conference On Fuel Cell & Hydrogen Technology (icfcht2017). . |
| Mariyam Jameelah Ghazali. (2016). Young Persons` World Lecture Competition 2015 - Finale Report. - Materials Mind. . |
| M.f.b. Abdollah, S. Kasolang, N.w.m. Zulkifli, M.j. Ghazali, I.c. Gabeshuber & H.h. Masjuki. (2016). Tta-tribology Resources For Industrial Professionals. - Tribology In Malaysia : General Perspective. . |
| Salina Abdul Samad, Ma Hannan, Siti Kartom Kamarudin, Mariyam Jameelah Ghazali, Ahmed Hussein Kamel Ahmed Nasser Elshafie, Zulkifli Mohd Nopiah, Sudharshan Naidu, Abdul Halim Ismail & Roslena Md Zaini. (2015). Research Bulletin Innovate-engineering And Built Environment (vol 8). - . . |
| Shahrir Abdullah, Mariyam Jameelah Ghazali, Salmiah Kasolang, Mohd. Fadzli Abdollah, Aidah Jumahat, Nik Roselina Nik Roseley, Noreffendy Tamaldin, Nor Azmmi Masripan, Hilmi Amiruddin.. (2015). Plain Bearing Handbook. - . . |
| Mariyam Jameelah Ghazali, Esah Hamzah. (2015). Universiti Malaya Student Won The Mlc 2015 Finals And Will Represent Malaysia In Ypwlc2015 In Dublin, Ireland. - Materials Mind. . |
| Joelle C.w. Mah, Andanastuti Muchtar, Mahendra Rao Somalu, Mariyam Jameelah Ghazali. (2015). Spinel-coated Fe-stainless Steel As Intermediate Temperature Solid Oxide Fuel Cell Interconnects: A Review. - The 5th International Conference On Fuel Cell And Hydrogen Technology (icfcht2015). . |
| Che Husna Bt. Azhari, Mariyam Jameelah Binti Ghazali, Ude Albert Uchenna, Dzuraidah Binti Abd. Wahab. (2015). Structure-property, Processing, Performance, Recycle And Reuse (rr) Of Advanced Materials.. - Properties Of Zno: Sn Pro. . |
| Mariyam Jameelah Binti Ghazali, Masfueh Binti Razali, Syarif Junaidi Bin Sjarifuddin Djalil, Andanastuti Muchtar. (2015). Surface Treatment Of Custom Made Plasma Sprayed Zirconia Coated Titanium Alloys For Dental Implants. - . . |
| Che Husna Bt. Azhari, Andanastuti Muchtar, Mariyam Jameelah Binti Ghazali, Dr. Mohmad Asri Abd Gani, Dr. Noraiham Binti Mohamad. (2015). Design & Development Of Entrap (ergonomic Trauma Pack) Prototype For Specialised Sectors. - Rankings And Rating Of Ip. . |
| Andanastuti Muchtar, Mariyam Jameelah Binti Ghazali, Abu Bakar Bin Sulong. (2015). Translucency And Improved Fracture Toughness Of Nanocrystalline Oxide Ceramics By Morphology Control. - . . |
| Che Husna Bt. Azhari, Mariyam Jameelah Binti Ghazali. (2014). Entrap: Ergonomic Solution For Ballistic Pretection. - Properties Of Zno: Sn Pro. . |
| Salina Abdul Samad, Ma Hannan, Siti Kartom Kamarudin, Mariyam Jameelah Ghazali, Ahmed Hussein Kamel Ahmed Nasser Elshafie, Zulkifli Mohd Nopiah, Sudharshan Naidu A/l Raman, Abdul Halim Ismail Dan Roslena Binti Md Zaini. (2014). Research Bulletin Innovate-engineering And Built Environment (vol 7). - . 1-88. |
| Salina Abdul Samad, Ma Hannan, Siti Kartom, Mariyam Jameelah Ghazali, Ahmed Hussein Kamel, Zulkifli Mhd Nopiah, Sudharshan Naidu, Abdul Halim Ismail & Roslena Md Zaini. (2013). Research Bulletin Innovate Volume 6, 2013. - Research Bulletin. . |
| I. Agung, J. Syarif, M.j. Ghazali, Z. Sajuri. (2011). Effect Of Cu Particles Precipitation On Wear Behaviour Of Fe-3mass%cu Under Dry Sliding Condition. - Key Engineering Materials. . |
| A. Almaslow, M. J. Ghazali, R. J. Talib, C. T. Ratnam And C. H. Azhari And S. M. Forghani. (2011). Effects Of Vulcanization In Semi-metallic Friction Materials On Friction Performance. - Regional Tribology Conference. . |
| A.j. Helmisyah, S. Abdullah, M.j. Ghazali. (2011). Structure Integrity Analysis Of Piston Crown Against Thermal Stress For Compressed Natural Gas Direct Injection Engine. - Regional Tribology Conference 2011. . |
| A.f.a. Rasid, M.j. Ghazali, T.i. Mohamad & W.m.f.w. Mahmood. (2011). Pressure Behaviour Of Lubricant Oil During Engine Operation. - Regional Tribology Conference 2011. . |
| Helmisyah Ahmad Jalaludin, Mariyam Jameelah Ghazali, And Shahrir Abdullah. (2010). Thermal Analysis Of Piston Crown For Compressed Natural Gas Direct Injection Engine And The Use Of Thermal Barrier Coating Against Extreme Temperature. - International Conference On Science & Technology: Applications In Industry & Education (2010), Penang. . |
| N. I. I. Mansor, M. J. Ghazali And M. Z. Nuawi. (2010). An Investigation Of Sliding Wear Bearing Using Airborne Technique. - 3rd Regional Conference On Noise, Vibration And Comfort (nvc ) 2010. . |
| A. Alfan, M.z. Omar, J. Syarif And M.j. Ghazali. (2009). Vanadis 4 Steel Behaviour In Semi Solid Zone Prior To Thixoforming Process. - 4th International Conference On Recent Advances In Materials, Minerals & Environment 2009 And 2nd Asian Symposium On Materials And Processing 2009. . |
| N.mohamad, A. Muchtar, M. J. Ghazali, Dahlan H.m., C.h. Azhari. (2009). The Effects Of Filler Loading And 3-aminopropyltriethoxysilane In Epoxidised Natural Rubber-alumina Nanoparticles Composites (enran). - 4th International Conference On Recent Advances In Materials, Minerals Environment And 2nd Asian Symposium On Material And Processing, Penang. Malaysia. . |
| Jaharah A.g., Che Hassan, Ghazali M.j.,md.deros B., M.z. Nuawi, M.z.. (2008). Performance Of Uncoated Carbide Tool When Machining Cast Iron In Dry Condition. - 5 Th International Conference On Advanced Mateerial And Processing, Harbin, China, 2-5 Sep 2008. . |
| Andanastuti Muchtar, Amiruddin Ismail, Hafizah Husain, Jamaliah Md Jahim, Mariyam Jameelah Ghazali Dan Muhammad Farihin Irfan Mohd Nor. (2007). Prosiding Seminar Penyelidikan Siswazah 2007. - Seminar Penyelidikan Siswazah 2007. . |
| Revolutionary StepEase 2.0: Smart Footwear for Innovative Diabetes Mellitus Wound Management , Ketua Projek , 01-08-2024 sehingga 31-07-2025 , Universiti |
| Subcritical Crack Growth, and Fatigue Behaviour of newly engineered Zirconia: A Comprehensive Study using Experimental and Computational Technique , Ketua Projek , 01-10-2023 sehingga 30-09-2026 , Kebangsaan |
| 3D Bioprinting of Biomimetic Hybrid Bioink for Bone Regeneration Scaffold , Penyelidik Bersama , 18-04-2024 sehingga 17-04-2025 , Kebangsaan |
| Investigation of regenerative potential of three-dimensional bioprinted nanohydroxyapatite-based scaffold for periodontal regeneration , Penyelidik Bersama , 12-01-2023 sehingga 11-01-2025 , Universiti |
| Elucidating Erosion-related Degradation Behaviour of High-velocity Oxy-fuel (HVOF) Sprayed Bi-layer Alloy-718/NiCrAlY Coating in Low-pressure Steam Turbine Blades , Penyelidik Bersama , 01-09-2022 sehingga 31-08-2025 , Kebangsaan |
| Wound Management of Diabetes Mellitus via Indoor Foot Pressure Relief Footwear (StepEaseâ„¢) , Ketua Projek , 01-12-2020 sehingga 31-08-2023 , Kebangsaan |
| Characterisations on wettability properties of laser textured ZnO/ TiO2 coatings for pipeline antifouling activities. , Ketua Projek , 01-01-2019 sehingga 30-09-2022 , Kebangsaan |
| Facile in-situ casting technique of Fe-TiC for industries , Ketua Projek , 14-12-2018 sehingga 13-06-2021 , Universiti |
| Wear Analyses Of Thermal Sprayed TiC/CrC Coated Nickel Based Superalloys in Gas Turbines. , Ketua Projek , 15-08-2018 sehingga 14-05-2021 , Universiti |
| Pengoptimuman Pelapik Kaki Sentuhan Total StepEase(R) pada Agihan Plantar Tekanan bagi Pesakit Diabetes Mellitus di Malaysia. , Ketua Projek , 01-09-2017 sehingga 29-02-2020 , Kebangsaan |
| PEMBANGUNAN SARUNG KAKI BERTEKANAN TERAGIH UNTUK PESAKIT DIABETIK DI MALAYSIA , Ketua Projek , 01-03-2015 sehingga 28-02-2018 , Kebangsaan |
| Surface texturing of ceramic for mitigating biofouling and corrosion , Ketua Projek , 01-08-2014 sehingga 31-07-2017 , Universiti |
| Bio-adhesive effect of banana leaves for elevated temperature application , Ketua Projek , 16-12-2013 sehingga 30-05-2017 , Kebangsaan |
| Surface Treatment of Custom Made Plasma Sprayed Zirconia Coated Titanium Alloys for Dental Implants , Ketua Projek , 01-06-2012 sehingga 30-11-2015 , Kebangsaan |
| Siri Ensiklopedia dalam Sains & Teknologi Alam dan Tamadun Melayu (Ensiklopedia Kejuruteraan Melayu) , Ketua Projek , 01-06-2012 sehingga 31-12-2013 , Kebangsaan |
| tribological Analysis on lubricated sliding of alloys , Ketua Projek , 01-04-2012 sehingga 31-12-2013 , Universiti |
| Potentials and Characteristics of Rubeer Seed Oil As Drilling Base Fluids , Ketua Projek , 08-08-2011 sehingga 07-08-2012 , Universiti |
| DEVELOPMENT OF NEW CERAMIC COATING FOR MARINE STRUCTURE APPLICATION , Ketua Projek , 01-08-2008 sehingga 31-10-2010 , Kebangsaan |
| Development of Low Cost Technique For Wear Monitoring of Connecting Rod Bore , Ketua Projek , 01-10-2007 sehingga 30-09-2010 , Universiti |
| Structural And Tribological Characterisations Of Cu-Based Alloys As Coating Materials For Connecting Rod Bearings In Automotive Engine , Ketua Projek , 01-08-2007 sehingga 01-10-2009 , Kebangsaan |
| Effect of Hard Anodizing on Mechanical Properties of 7075-T6 Aluminium Alloy , Penyelidik Bersama , 01-09-2021 sehingga 31-08-2023 , Universiti |
| Innovative three-dimensional (3D) construct of hybrid biomaterial scaffold for bone regeneration: bioengineering of suitable injectable bio-inks for bioprinting technology , Penyelidik Bersama , 01-12-2019 sehingga 31-05-2022 , Universiti |
| Inter-diffusion and oxidation behaviour between (Cu,Mn,Co)3O4 spinel coated ferritic stainless steel interconnect and cathode material , Penyelidik Bersama , 01-01-2019 sehingga 31-03-2021 , Kebangsaan |
| Sifat Mekanik, Prestasi dan Mod Kegagalan Salutan Berlapis Pada Gelang Omboh , Penyelidik Bersama , 15-11-2018 sehingga 14-11-2021 , Universiti |
| Extra superplasticity of AA2618 alloy processed by high-pressure torsion , Penyelidik Bersama , 15-11-2018 sehingga 14-05-2021 , Universiti |
| StepEaseTM Diabetic Socks : An Answer to Efficacious Indoor Foot Pressure Relief – a Prospective Study , Penyelidik Bersama , 05-04-2018 sehingga 04-05-2019 , Universiti |
| Investigation of Synthesized Nanostructure and Superparamagnetic property of Calcium Ferrite Nanoparticles for Targeted Drug Delivery Application. , Penyelidik Bersama , 01-08-2016 sehingga 31-07-2018 , Kebangsaan |
| Development of Light Weight Materials for Ballistic Applications in Tropical Climates , Penyelidik Bersama , 01-01-2016 sehingga 30-06-2018 , Kebangsaan |
| Feasibility of Electrophoretically Depositing Cu-MCO on Ferritic Stainless Steel Interconnects , Penyelidik Bersama , 02-11-2015 sehingga 30-04-2018 , Kebangsaan |
| Jalinan Ruang dan Adat Dalam Seni Bina Rumah Negeri Sembilan , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Sistem Kenderaan Lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Modeling fracture in metallic glass components for use in back contact solar cell applications , Penyelidik Bersama , 01-06-2015 sehingga 30-11-2017 , Universiti |
| Pembangunan dan Kebolehlaksanaan Elemen Kompleksiti dalam Pengajaran dan Pembelajaran Kejuruteraan , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Universiti |
| Thixoforming of novel aluminium alloys , Penyelidik Bersama , 01-07-2014 sehingga 31-12-2017 , Kebangsaan |
| Sistem Kenderaan lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Memperdanakan Hasil Penyelidikan Teknologi dan Kelestarian Peradaban Melayu , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Assessment of Design Criteria for Optimum Multiple Generation Life Cycle , Penyelidik Bersama , 16-12-2013 sehingga 15-06-2016 , Kebangsaan |
| DESIGN & DEVELOPMENT OF ENTRAP (ERGONOMIC TRAUMA PACK) PROTOTYPE FOR SPECIALISED SECTORS , Penyelidik Bersama , 01-08-2013 sehingga 31-03-2015 , Kebangsaan |
| ENTRAP: Ergonomic Solution for Ballistic Pretection , Penyelidik Bersama , 01-06-2013 sehingga 30-11-2014 , Universiti |
| A Predictive Model for Evaluation of Strength in Bimodal Distributed Nanostructed Composites , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2016 , Kebangsaan |
| Translucency and Improved Fracture Toughness of nanocrystalline oxide Ceramics by Morphology Control , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2015 , Kebangsaan |
| PEMIKIRAN SAINTIFIK DAN APLIKASI TEKNOLOGI DALAM PENGHASILAN ARTIFAK SENI MELAYU , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| STRUCTURE-PROPERTY RELATIONSHIP, PROCESSING AND PERFORMANCE OF ADVANCED MATERIALS , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| SISTEM KENDERAAN BERKECEKAPAN BAHAN API OPTIMUM , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| Sterilizing Unit With in-Built Timer for Endoscope , Penyelidik Bersama , 01-01-2013 sehingga 31-12-2013 , Universiti |
| Structure-Property, Processing, Performance, Recycle and Reuse (RR) of Advanced Materials. , Penyelidik Bersama , 15-06-2012 sehingga 14-06-2015 , Universiti |
| Polarization Mechanism under Mechanical Loading for Corrosion Prevention , Penyelidik Bersama , 01-06-2012 sehingga 31-05-2015 , Kebangsaan |
| Development of Wear Model of Semi-Metallic Friction Materials , Penyelidik Bersama , 08-08-2011 sehingga 08-11-2012 , Universiti |
| Development of Nanostructured Materials for Dental Applications , Penyelidik Bersama , 01-10-2010 sehingga 31-03-2013 , Universiti |
| COMPUTATIONALLY OPTIMISED FUEL-EFFICIENT CONCEPT CAR , Penyelidik Bersama , 01-11-2009 sehingga 31-12-2014 , Kebangsaan |
| NETWORK EXTENSION OF THE UKM-UDE DOUBLE DEGREE PROGRAMMES , Penyelidik Bersama , 15-07-2009 sehingga 14-08-2011 , Universiti |
| Creep Ruputure Properties of Welded Turbine Blade Materials , Penyelidik Bersama , 01-06-2008 sehingga 30-11-2011 , Universiti |
| Design of CNG-DI Piston for Extreme Temperature and Pressure , Penyelidik Bersama , 01-10-2007 sehingga 30-06-2012 , Universiti |
| Non-Contact On-Line Monitoring and Measurement of Cutting Tool Wear Development During Milling Operation , Penyelidik Bersama , 01-10-2007 sehingga 30-09-2011 , Universiti |
| Improvement of Strength and Workability of Dual-Phase Ti-6%Al-4%V Alloys through Alloy Design Technique and Artificial Neural Network , Penyelidik Bersama , 01-10-2007 sehingga 31-12-2010 , Universiti |
| Teknologi Roda Air Melayu Untuk Pengairan , Penyelidik Bersama , 01-10-2007 sehingga 28-02-2010 , Universiti |
| Development Of A Fatigue Life Characterisation Of Composite Materials Under Spectrum Loadings , Penyelidik Bersama , 01-12-2006 sehingga 01-06-2009 , Kebangsaan |
| Rolling Contact Fatigue (Rcf) Studies Of Railway Track In Malaysia , Penyelidik Bersama , 01-12-2006 sehingga 01-04-2009 , Kebangsaan |
| Development Of Novel Beta Titanium Alloys For Biomaterials , Penyelidik Bersama , 01-12-2006 sehingga 28-02-2009 , Kebangsaan |
| Anugerah Perkhidmatan Cemerlang , 2008 |
| Anugerah Penyelidikan , 2012 |
| Anugerah Pengajar Cemerlang , 2012 |
| Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2016 |
| Anugerah Gaya Hidup Aktif (L/P) , 2024 |
| Penghargaan PTJ , 2023 |
| Anugerah Gaya Hidup Aktif (L/P) , 2023 |
| Japan Foundation Grant Letter , 2022 |
| Invention, Innovation & Design Exposition 2016 (iidex2016) , 2016 |
| Invention, Innovation & Design Exposition 2016 (iidex2016) , 2016 |
| Sponsorship to Accompany MLC Champion to YPLWC 2015 , 2015 |
| Ketua Penyunting Jurnal Kejuruteraan , 2015 |
| Anugerah Pengajar Cemerlang , 2014 |
| Pengerusi Jawatankuasa Peperiksaan Lisan Tesis/Disertasi Program Pengajian Siswazah , 2013 |
| Ketua Pakar Penilai Kemahiran Insaniah , 2013 |
| Bioactivity of Limestone-based Nanohydroxyapatite Composites for 3-dimensional, ZATIL HANAN BINTI YAHAYA, Sarjana |
| 3D BIOPRINTING OF BIOMIMETIC HYBRID INJECTABLE BIO-INK FOR BONE REGENERATION SCAFFOLD, SHARIFAH ALYSSA BINTI SYED OMAR, Sarjana |
| Pengaruh Primer Simen Resin Perekat Pada Integriti Stuktur dan Kekuatan Ikatan Antara Zirkonia dan Dentin., NURUL SHAYHIERA BINTI AMINUDDIN, Sarjana |
| ” Kesan Salutan Aloi Bersasakan Kuprum Terhadap Sifat Aloi A17075 Menggunakan Kaedah Semburan Plasma ”, SUSHELLA EDAYU BINTI MAT KAMAL, Sarjana |
| Development of Low Cost Technique For Wear Monitoring Of Connecting Rod Bore, NOR IZAN IZURA BINTI MANSOR, Sarjana |
| Optimisation of Degassing Treatment of Cast Al-Si-Mg Alloy, ANI HARYATI ABDUL AZIZ, Sarjana |
| Salutan Alumina Titania Menggunakan Kaedah Semburan Plasma Untuk Aplikasi Struktur Marin., NIK HASSANUDDIN BIN NIK YUSOFF, Sarjana |
| Analisa Kebocoran Ring Piston Pada Mesin CNGDI, TEDDY NUGROHO NOTOSUSANTO, Sarjana |
| Kajian pemakaian minyak pelinciran terhadap struktur mikro gelang omboh automotif enjine., MECHI HARDO, Sarjana |
| AZMAN BIN AZIZ, Sarjana |
| Analisa Haus Unsur Terhingga Superaloi Nikel Besrsalut Tic/Crc Melalui Semburan Terma Bagi Komponen Kombuster Gas Turbin., AHMAD ALIFF SYAKIR BIN AZMAN, Sarjana |
| Structure Integrity Thermal Analyses of Coated Piston Crown For Compressed Natural Gas Direct Injection Engine., HELMISYAH BIN AHMAD JALALUDIN, Sarjana |
| Pengendapan elektroforesis Salutan (Cu, Mn, Co)3 O4 ke atas Keluli Tahan Karat, MUHAMAD ISYRAF BIN AZNAM, Sarjana |
| Angkatan Dan Pemasaan Injap Adaptif Berpandukan Tekanan Untuk Peningkatan, AHMAD FUAD BIN ABDUL RASID, Sarjana |
| Characteristic and Potential of Rubber SeedOil of Drilling Based Fluids., USMAN BIN MD YUSOF, Sarjana |
| Pemprosesan Berkoloid Serbuk Nano Zirkonia Untuk Aplikasi Pergigian., NOOR FAEIZAH BINTI AMAT @ AHMAD KHAIRONI, Sarjana |
| Pembangunan Zirkonia (Y-TZP) Bersifat Lut Cahaya Melalui Pengedopan Alumina Dan Penggunaan Agen Penyerak, THENG KAI YUAN, Sarjana |
| SIFAT-SIFAT HAUS SALUTAN KERAS BERASASKAN KROMIUM TERHADAP KEBUK PEMBAKARAN, SALMI BT. MOHD YUNUS @ ABD WAHID, Sarjana |
| ANALISIS DAN PERINCIAN HAUS KOMPONEN PEMBAKAR TURBIN GAS, AHMAD AFIQ BIN PAUZI, Sarjana |
| MODEL BERSEPADU PENSAIZAN LOT DAN PENJADUALAN UNTUK, HUDA MUHAMAD BADRI, Sarjana |
| SIFAT HAUS HAKISAN SALUTAN ALUMINA TITANIA TERTEKSTUR CAWAK, AHMAD FIRDAUS BIN SHAMSUL BAHARIN, Sarjana |
| The development of unidirectional bombx mori fibre/epoxidised natural rubber alumnia nanoparticles (UBMF/ENRAN) segmented composites as trauma pack in security applications, MOHAMAD MUSTAQIM, Sarjana |
| DR. ELAINE SOH ZI FAN, Sarjana |
| PEMBANGUNAN ZIRKONIA MESRA ANTAGONIS: PENCIRIAN SIFAT HAUS BAGI APLIKASI DENTAL, MUHAMMAD SUFIYAN BIN AMRIL, Sarjana |
| In-Vitro and in Vivo Biocompatibility of Customized Printable Hydroxyapatite-based Bone Scaffolds for Periodontal Osseous Defects Therapy, NURULHUDA MOHD, Doktor Falsafah |
| Penilaian Hayat Zirkonia Dibawah Pengaruh Pembebanan Berkitar., MUHAMMAD SUFIYAN BIN AMRIL, Doktor Falsafah |
| HASNAA HADI HANDAS AL ZUBAIDI, Doktor Falsafah |
| MAHDI ALEBRAHIM, Doktor Falsafah |
| YANG MINGXIAO, Doktor Falsafah |
| Integrated Injector Spark Plug for CNG DI., TAHER KHALAF BARAKAT AYOUB, Doktor Falsafah |
| Komposit Aloi Aluminium Kekuatan Tinggi Kekuatan Tinggi Diperkuat Dengan Aluminium, MAHAMAD NOOR BIN WAHAB, Doktor Falsafah |
| Pembangunan Komposit Getah Asli Terepoksida-Alumina (ENRAN) untuk Penyerapan, NORAIHAM BINTI MOHAMAD, Doktor Falsafah |
| Pencirian Sifat Mekanik dan Kakisan Aloi Aluminium 6063 Terubahsuai untuk Aplikasi Marin, HERMAN PRATIKNO, Doktor Falsafah |
| Analisis Mekanik Patah Pada Retak Permukaan Dalam Bar berbentuk Silinder Padu., AL EMRAN BIN ISMAIL, Doktor Falsafah |
| Mechanical Properties and Corrosion Resistance Characteristics of Plasma Sprayed Titania Coatings Deposited on Mild Steel for Marine Structures, SEYED MOHSEN FORGHANI, Doktor Falsafah |
| Kesan Pembebanan Spektrum dan Suhu Terhadap Hayat Lesu Aloi Aluminium AA6061 Dan AA7075., KAMARUL ARIFFIN BIN ZAKARIA, Doktor Falsafah |
| AHMED A. SHARIF, Doktor Falsafah |
| MOHAMAD FAIZAL BIN ABDULLAH, Doktor Falsafah |
| PENGOPTIMUMAN PARAMETER TEKNIK PEMANASAN HIDROTERMA DENGAN BANTUAN GELOMBANG MIKRO UNTUK SINTESIS MXENE TI3C2TX DALAM APLIKASI TRIBOLOGI, HAIZUM AIMI BINTI ZAHARIN, Doktor Falsafah |
| PERKEMBANGAN MODEL HAUS BAHAN GESERAN SEPARA LOGAM-ENRAN, ALIREZA ALMASLOW, Doktor Falsafah |
| CIRI-CIRI HAUS SALUTAN KERAS SEMBURAN TERMA CrC/TiC PADA SUPERALOI, AHMAD AFIQ BIN PAUZI, Doktor Falsafah |
| A Modified Synthesis of Tic And TiC0.7N0.3 Nanopowders, ARMIN RAJABI NASIRABADI, Doktor Falsafah |
| Development and performance of mono and multilayer coated carbide tools for, SIOW PING CHUAN, Doktor Falsafah |
| ALOI ALUMINUM THIXOFORMING A319 DENGAN TAMABAHAN TEMBAGA, KHALED S. M. ALHAWARI, Doktor Falsafah |
| CIRI-CIRI MEKANIK DAN KESERASIAN BIOLOGI SALUTAN SEMBURAN PLASMA ZIRKONIA, AFIDA BINTI JEMAT, Doktor Falsafah |
| SINTESIS SAIZ TERKAWAL NANOZARAH MAGNET KALSIUM FERIT TERUBAH, NOOR HUMAM SULAIMAN, Doktor Falsafah |
| KESAN BIOREKATAN DAUN PISANG KE ATAS APLIKASI SUHU TERNAIK, HASRAWATI BT. ABU HASSAN, Doktor Falsafah |
| KOMPOSIT BIODEGRADASI GENTIAN KENAF/POLILAKTIK ASID SEBAGAI BAHAN PENGKUSYENAN, FARAZIAH HASSAN, Doktor Falsafah |
| SITI ATIQA AL ZAHRA BINTI MAT DARUS, Doktor Falsafah |
| PEMBANGUNAN PENILAIAN KEBARANGKALIAN KESELAMATAN BAGI, MNEL A. H. ABDELGNEL, Doktor Falsafah |
| Antarahubung Keluli Tahan Karat Berferit Tersalut Spinel Untuk Aplikasi SelFuel Oksida Pepejal, MAH CHIA WEN, Doktor Falsafah |
| KELAKUAN HAKISAN DAN KAKISAN KELULI BERSALUT AL2O3-13%TIO2 TERTEKSTUR LASER, JUYANA BINTI A WAHAB, Doktor Falsafah |
| BLOK ZIRKONIA MONOLITIK UNTUK RESTORASI PERGIGIAN MELALUI TEKNIK, NOOR FAEIZAH BT. AMAT @ AHMAD KHAIRONI, Doktor Falsafah |
| Fracture Toughness Behavior And Thermal Effect To Kenaf Woven/Biodegradeable Matrix Biocomposite, MEOR SYAZALEE BIN SHA @ MEOR SHA, Doktor Falsafah |
| SIFAT KEBOLEHBASAHAN DAN ANTIBAKTERIA SALUTAN SERAMIK TiO2/ZnO TERTEKSTUR LASER, YUSLIZA BINTI YUSUF, Doktor Falsafah |
| Roundtable Session for Materials Engineering Group of TNBR , 20-10-2014 sehingga 20-10-2014 , Kebangsaan |
| Materials Lecture Competition 2015 , 10-12-2014 sehingga 02-11-2015 , Antarabangsa |
| Malaysian Tribology Society , 08-01-2014 sehingga 17-11-2015 , Kebangsaan |
| Penyelidikan Sekolah Berprestasi Tinggi (SBT) , 25-11-2014 sehingga 30-11-2015 , Kebangsaan |
| Materials & Design , 23-09-2014 sehingga 14-10-2014 , Antarabangsa |
| International Advisory Board , 08-10-2014 sehingga 30-09-2015 , Antarabangsa |
| PROGRAM BIASISWA HADIAH LATIHAN PERSEKUTUAN SESI 2016 , 23-11-2015 sehingga 24-11-2015 , Kebangsaan |
| Universiti Malaysia Terengganu , 02-08-2015 sehingga 02-08-2015 , Kebangsaan |
| Malaysian International Tribology Conference , 25-08-2014 sehingga 31-01-2016 , Antarabangsa |
| 3rd INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN AUTOMOTIVE ENGINEERING & MOBILITY RESEARCH (ReCAR2013) AND 5th INTERNATIONAL CONFERENCE ON NOISE, VIBRATION & COMFORT (NVC 2015) , 09-01-2015 sehingga 31-03-2016 , Antarabangsa |
| Buku Panduan Galas Datar , 21-02-2014 sehingga 27-01-2015 , Antarabangsa |
| Ensiklopedia Kejuruteraan Alam Melayu , 01-12-2013 sehingga 27-08-2015 , Kebangsaan |
| Ensiklopedia Kejuruteraan Alam Melayu , 01-12-2013 sehingga 27-08-2015 , Kebangsaan |
| TV interview IQRA' - UK , 27-10-2015 sehingga 27-10-2015 , Antarabangsa |
| Working Group PVC Pipes MS ISO sirim , 01-09-2006 sehingga 30-10-2009 , Kebangsaan |
| MS ISO 28704:2012 , 03-11-2008 sehingga 31-12-2012 , Kebangsaan |
| MS 2498:2012 , 04-10-2010 sehingga 31-10-2012 , Kebangsaan |
| Materials Lecture Competition Malaysia , 01-01-2015 sehingga 31-12-2015 , Antarabangsa |
| Pengerusi jawatankuasa peperiksaan lisan tesis/disertasi Program Pengajian Siswazah , 01-12-2013 sehingga 01-12-2014 , Kebangsaan |
| Asian Tribology Council , 16-09-2018 sehingga 16-09-2022 , Antarabangsa |
| 3 minute thesis , 16-04-2019 sehingga 16-04-2019 , Kebangsaan |
| Malaysia Tribology Society , 01-01-2020 sehingga 31-12-2021 , Kebangsaan |
| Keynote for International Conference on Sustainable Materials 2020 , 02-01-2020 sehingga 30-03-2020 , Antarabangsa |
| symposium on additive manufacturing , 22-01-2020 sehingga 22-01-2020 , Antarabangsa |
| Sakura Science Scholarship Research Visit , 04-08-2020 sehingga 31-01-2021 , Antarabangsa |
| Materials Lecture Competition Malaysia (IMM) , 02-01-2020 sehingga 30-09-2020 , Kebangsaan |
| Pakar Bidang Bahan , 27-07-2020 sehingga 16-09-2022 , Kebangsaan |
| Penilai luar FRGS 1/2020 , 21-05-2020 sehingga 29-05-2020 , Kebangsaan |
| Moderator Sesi Bedah Buku , 11-11-2020 sehingga 11-11-2020 , Kebangsaan |
| Webinar sesi bedah buku 2020 - siri 2 , 18-12-2020 sehingga 18-12-2021 , Kebangsaan |
| Felo Bersekutu Institut IR4.0 , 01-10-2020 sehingga 30-11-2022 , Kebangsaan |
| Matching Grant for R&D Cooperation Project with 3 university partners , 01-12-2020 sehingga 31-12-2022 , Kebangsaan |
| Entruss Ventures Sdn Bhd & YAYASAN MAGHFIRAH , 01-06-2021 sehingga 01-04-2022 , Kebangsaan |
| Entruss Ventures Sdn Bhd & YAYASAN MAGHFIRAH , 01-06-2021 sehingga 01-04-2022 , Kebangsaan |
| Universiti Tenaga Nasional , 14-06-2021 sehingga 15-09-2021 , Kebangsaan |
| Lembaga Teknologis Malaysia , 26-08-2021 sehingga 26-08-2031 , Kebangsaan |
| Institution of Mechanical Engineers , 25-08-2021 sehingga 25-08-2022 , Antarabangsa |
| PENGERUSI PERSIDANGAN MEJA BULAT (BIDANG INDUSTRI DAN PRODUKTIVITI) PROGRAM BULAN BAHASA 2021 , 08-10-2021 sehingga 31-10-2021 , Kebangsaan |
| Performance Analysis of Self-Lubricating Composite Material for High Speed Applications , 23-09-2021 sehingga 01-01-1970 , Antarabangsa |
| An investigation of Tribological Performance of Engineering Plastics & their Composites under Dry & Wet Friction Conditions , 10-12-2021 sehingga 01-01-1970 , Antarabangsa |
| Malaysia Tribology Society , 01-01-2022 sehingga 31-12-2023 , Kebangsaan |
| WAXY CRUDE OIL EMULSION INTERFACIAL RHEOLOGY. , 14-12-2021 sehingga 01-01-1970 , Kebangsaan |
| BIO-BASED AND HYBRID BASED POLYMER COMPOSITES FOR ELECTRONIC PACKAGING APPLICATIONS: FABRICATION, CHARACTERIZATION, AND PROPERTIES COMPARISON , 03-06-2021 sehingga 01-01-1970 , Kebangsaan |
| Lembaga Teknologis Malaysia , 22-02-2022 sehingga 21-02-2023 , Kebangsaan |
| 1st INTERNATIONAL CONFERENCE ON CORROSION AND SURFACE TECHNOLOGY 2022 (I-COST 2022) , 25-08-2022 sehingga 26-08-2022 , Antarabangsa |
| Japan Foundation Grant Letter , 23-11-2022 sehingga 01-01-1970 , Antarabangsa |
| HIKEF 2022 , 29-06-2022 sehingga 01-07-2022 , Kebangsaan |
| THE REPRESENTATIVE OF MALAYSIAN TRIBOLOGY SOCIETY TO BID FOR THE WORLD TRIBOLOGY CONGRESS (WTC) 2026 IN MALAYSIA , 10-07-2022 sehingga 15-07-2022 , Antarabangsa |
| Malaysia Tribology Society , 06-03-2023 sehingga 06-03-2023 , Antarabangsa |
| Asian Tribology Council , 01-01-2023 sehingga 31-12-2024 , Antarabangsa |
| DURABILITY ENHANCEMENT OF EPOXY-ZINC OXIDE-BASED SUPERHYDROPHOBIC COATING BY MODIFYING THE ROLE OF STEARIC ACID , 15-10-2022 sehingga 01-01-1970 , Kebangsaan |
| Lantikan Prof Madya pensyarah UTEM , 13-01-2023 sehingga 02-02-2025 , Kebangsaan |
| Wettability and microstructure evolution of Lead-free solder on laser textured copper substrate during soldering , 09-02-2023 sehingga 01-01-1970 , Kebangsaan |
| Influence of Fatty acid polyol ester composition on boundary lubricity of trimethylolpropane ester , 28-02-2023 sehingga 01-01-1970 , Kebangsaan |
| 5th INTERNATIONAL CONFERENCE ON THE SCIENCE AND ENGINEERING OF MATERIALS 2023 , 21-11-2023 sehingga 22-11-2023 , Antarabangsa |
| WATERBORNE ANTI-CORROSION COATING WITH THE INCORPORATION OF PAPAYA LEAVES EXTRACTS AND TiO2 NANOPARTICLES ON STAINLESS STEEL (316L) FOR MARINE ENVIRONMENT , 06-03-2023 sehingga 01-01-1970 , Kebangsaan |
| Experimental and Numerical Study of Surface Texturing for Low Power Combustion Engines , 21-03-2023 sehingga 01-01-1970 , Antarabangsa |
| PENILAIAN KENAIKAN PANGKAT AKADEMIK UNITEN , 06-03-2023 sehingga 01-06-2023 , Kebangsaan |
| Uniten , 08-05-2023 sehingga 19-05-2023 , Kebangsaan |
| AN INVESTIGATION ON THE TRIBOLOGICAL PERFORMANCE OF HYBRID NANOLUBRICANTS FOR USE IN IC ENGINES , 15-06-2023 sehingga 01-01-1970 , Antarabangsa |
| Sesi Libat Urus pemegang taruh: Hala Tuju STEM (KPM) , 16-06-2023 sehingga 23-06-2023 , Kebangsaan |
| #30 PROGRAM PENDIDIKAN PINTAR CERDAS: PELANTIKAN SELAKU AHLI MAKMAL PEMBINAAN PELAN HALA TUJU PROGRAM PENDIDIKAN PINTAR CERDAS , 14-08-2023 sehingga 01-08-2023 , Kebangsaan |
| CORRELATION OF TRIBOLOGICAL PERFORMANCE IN ALUMINIUM OPEN-CLOSED FORGING LUBRICATED WITH PALM OIL , 24-07-2023 sehingga 01-01-1970 , Kebangsaan |
| A NEW GROUNDING PLATE IMPROVED POWDER FIRST PASS TRANSFER EFFICIENCY AND COATING APPEARANCES , 07-09-2023 sehingga 01-01-1970 , Kebangsaan |
| Malaysia Tribology Society , 01-01-2024 sehingga 31-12-2422 , Kebangsaan |
| Malaysia Tribology Society , 01-01-2024 sehingga 31-12-2422 , Kebangsaan |
| Human Resource development cooperation , 07-12-2023 sehingga 06-01-2033 , Kebangsaan |
| AP TS. DR. SAZMAL EFFENDI BIN ARSHAD , 26-01-2024 sehingga 09-02-2024 , Kebangsaan |
| Thermal Analysis And Material CharacterizationOf Museum Ceramic Artifacts , 21-02-2024 sehingga 01-01-1970 , Kebangsaan |
| Thermal Analysis And Material CharacterizationOf Museum Ceramic Artifacts , 21-02-2024 sehingga 01-01-1970 , Kebangsaan |
| DURABILITY ENHANCEMENT OF EPOXY-ZINC OXIDE-BASED SUPERHYDROPHOBIC COATING BY MODIFYING THE ROLE OF STEARIC ACID , 30-09-2024 sehingga 03-12-2024 , Antarabangsa |
| EVALUATION OF WORKPIECE SURFACE DETERIORATION DURING FINISH TURNING BY USING NON-CONTACT VISION METHOD , 29-03-2024 sehingga 01-01-1970 , Kebangsaan |
| penilaian dana penyelidikan KPT 2024 , 16-12-2023 sehingga 31-12-2024 , Kebangsaan |
| PENILAIAN KENAIKAN PANGKAT AKADEMIK UNIMAP , 13-05-2024 sehingga 07-06-2024 , Kebangsaan |
| 6TH MALAYSIA-JAPAN TRIBOLOGY SYMPOSIUM (MJTS2024) , 29-08-2024 sehingga 29-08-2024 , Antarabangsa |
| Pengurus Pasukan Gugusan Ikhtisas 2023 , 23-06-2023 sehingga 11-07-2023 , Daerah / Jajahan |
| AHLI JAWATANKUASA PENILAIAN BAGI PERMOHONAN GERAN MALAYSIA LABORATORIES FOR ACADEMIA-BUSINESS COLLABORATION (MYLAB) FASA 1 TAHUN 2022 , 14-06-2022 sehingga 13-06-2023 , Universiti |
| Ahli Jawatankuasa Penilai Geran Penyelidikan di bawah Dana UP Tahun 2020 , 15-05-2020 sehingga 31-12-2020 , Universiti |
| Antarabangsa FKAB , 01-06-2013 sehingga 31-05-2015 , Fakulti / Institut / Pusat Perkhidmatan |
| Buletin Innovate Fakulti kejuruteraan dan Alam Bina , 01-01-2013 sehingga 31-12-2015 , Fakulti / Institut / Pusat Perkhidmatan |
| DANA PENERBITAN BUKU 2021 , 12-04-2021 sehingga 31-12-2021 , Universiti |
| Geran Penyelidikan Di Bawah Dana Universiti Penyelidikan (UP) Geran GGPM, DIP & GUP Tahun 2019-Peringkat Fakulti , 09-07-2019 sehingga 09-07-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Anugerah FKAB , 01-05-2022 sehingga 30-04-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Cabaran Maya 2021 , 15-03-2021 sehingga 15-03-2021 , Universiti |
| Jawatankuasa Cabaran Maya UKM , 01-01-2021 sehingga 31-08-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Fokus TERAS (Kebitaraan Holistik) , 01-04-2023 sehingga 30-04-2025 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Fokus TERAS (Kebitaraan Watan) , 01-04-2023 sehingga 30-04-2025 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Gotong Royong Perdana FKAB , 13-03-2023 sehingga 13-03-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Gotong Royong Perdana Jabatan Kejuruteraan Mekanikal dan Pembuatan 2022 , 20-07-2022 sehingga 20-07-2022 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Kayuhan Jelajah Watan , 14-10-2023 sehingga 16-10-2023 , Universiti |
| Jawatankuasa Kecil Pelaksana Bidang Keberhasilan (KRA) Teras 2 , 14-07-2014 sehingga 13-07-2017 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Kepakaran IIR4.0 , 01-10-2020 sehingga 30-09-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Kumpulan Fokus Teras UKM (Kebitaraan Holistik) , 01-10-2021 sehingga 30-09-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Kumpulan Fokus Teras UKM (Kebitaraan Watan) , 01-10-2021 sehingga 30-09-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Lawatan Latihan Industri Sesi 2023 , 14-08-2023 sehingga 11-10-2023 , Universiti |
| Jawatankuasa Panel Penilai Dana Penyelidikan Peringkat Fakulti , 01-06-2022 sehingga 31-12-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Panel Penilai Geran Penyelidikan Di Bawah Dana Penyelidikan (UP) 2020 , 27-04-2020 sehingga 28-04-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pembangunan Pelan Strategik FKAB , 01-05-2022 sehingga 30-04-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pembangunan Pelan Strategik Fakulti Kejuruteraan dan Alam Bina , 01-05-2022 sehingga 30-04-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pemeriksa Siswazah Bil 51/2015 , 01-06-2015 sehingga 01-06-2015 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pemeriksa Siswazah Bil. 25/2016 (M) , 07-09-2016 sehingga 07-09-2016 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Kejuruteraan Mekanikal JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Pengurusan Teknologi Industri JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Peperiksaan Lisan Bil. 09/2020 (P.JKEES) , 19-08-2020 sehingga 19-08-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 1/2018 (M.E) , 25-01-2018 sehingga 25-01-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 1/2020 (P.KKP) , 09-01-2020 sehingga 09-01-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 11/2018 (M.Cespro) , 12-04-2018 sehingga 12-04-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 17/2020 ((P.JKKP) , 30-11-2020 sehingga 30-11-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 18/2018 (M.Cespro) , 06-08-2018 sehingga 06-08-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 28/2021 (P.JKMP) , 26-10-2021 sehingga 26-10-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 3/2019 (P.Mercu) , 22-02-2019 sehingga 22-02-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 32/2019 (P.PAKET) , 27-09-2019 sehingga 27-09-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 34/2018 (P.Mercu) , 04-10-2018 sehingga 04-10-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 7/2019 (M.Integra) , 12-03-2019 sehingga 12-03-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pertandingan Mencipta Poster dan Banner, JKMP , 01-09-2021 sehingga 15-12-2021 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Program Cuti Sekolah 2022 , 13-12-2022 sehingga 23-12-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Program Hari Industri dan Keusahawanan Fakulti 2023 (HIKEF , 01-01-2023 sehingga 15-06-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Semakan Semula Peraturan-Peraturan Universiti Kebangsaan Malaysia (Pengajian Siswazah) 2019 , 25-04-2019 sehingga 23-04-2021 , Universiti |
| Jawatankuasa UKM MLC 2021- 2022 , 01-01-2021 sehingga 31-12-2022 , Universiti |
| KESUTRA , 01-01-2015 sehingga 31-12-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Kumpulan Fokus T.E.R.A.S UKM (Kebitaraan Holistik) , 06-10-2021 sehingga 05-10-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Kumpulan Fokus T.E.R.A.S UKM (Kebitaraan Watan) , 06-10-2021 sehingga 05-10-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| PANEL PENILAI DANA INOVASI FASA 1/2021 BIL 2 , 20-04-2021 sehingga 20-04-2021 , Universiti |
| PANEL PENILAI GERAN FRGS FASA 1/2015 , 01-05-2015 sehingga 31-07-2015 , Universiti |
| PANEL PENILAI GERAN FRGS FASA 1/2016 , 29-01-2016 sehingga 28-04-2016 , Universiti |
| PANEL PENILAI GERAN FRGS FASA 1/2017 , 15-12-2016 sehingga 20-03-2017 , Universiti |
| PANEL PENILAI GERAN GUP DAN GGPM TAHUN 2018 , 27-06-2018 sehingga 27-06-2018 , Universiti |
| PANEL PENILAI GERAN TRGS FASA 1/2015 , 01-05-2015 sehingga 31-07-2015 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2023 , 18-03-2023 sehingga 31-12-2023 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2024 , 16-12-2023 sehingga 31-12-2024 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENGAJIAN TINGGI (DP KPT) TAHUN 2021 , 01-01-2021 sehingga 31-12-2021 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENGAJIAN TINGGI (DP KPT) TAHUN 2022 , 24-03-2022 sehingga 31-12-2022 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENYEDIAAN LAPORAN INTERIM PROGRAM SARJANA MUDA KEJURUTERAAN MEKANIKAL JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN , 10-07-2024 sehingga 09-08-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| PELANTIKAN SEBAGAI AHLI PANEL PENILAI PENYELIDIKAN FUNDAMENTAL (FRGS) FASA 1/2018 PERINGKAT UKM , 15-01-2018 sehingga 16-04-2018 , Universiti |
| PELANTIKAN SEBAGAI AHLI PANEL PENILAI PERINGKAT UNIVERSITI KEBANGSAAN MALAYSIA (UKM) - SKIM GERAN PENYELIDIKAN FUNDAMENTAL (FRGS) FASA 1/2019 , 15-01-2019 sehingga 11-04-2019 , Universiti |
| PELANTIKAN SEBAGAI PANEL PENILAI DANA PENYELIDIKAN PERINGKAT FAKULTI , 02-05-2024 sehingga 01-05-2027 , Fakulti / Institut / Pusat Perkhidmatan |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 INSTITUT SEL FUEL BAGI SEMESTER 2SESI AKADEMIK 2020/2021 , 04-08-2021 sehingga 05-08-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 SEMESTER 1 SESI AKADEMIK 2021/2022 , 15-02-2022 sehingga 16-02-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Dana Penerbitan Buku Tahun 2023 Fasa 1 , 01-01-2023 sehingga 31-12-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2022 , 01-06-2022 sehingga 31-12-2022 , Universiti |
| Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2023 , 26-07-2023 sehingga 31-12-2023 , Universiti |
| Panel Penilai Proposal RARA6014/RARA8014 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Pelantikan Sebagai Ahli Jawatankuasa Penilaian Program Dana Penyelidikan Kementerian Pengajian Tinggi (DP KPT) Tahun 2020 Peringkat Universiti Kebangsaan Malaysia , 01-01-2020 sehingga 31-12-2020 , Universiti |
| Penilai Geran Penyelidikan di bawah Dana RU Tahun 2021 , 01-05-2021 sehingga 31-12-2021 , Universiti |
| Penilai Kolokium Siswazah 2023 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Sambutan 30 Tahun FKAB , 08-10-2014 sehingga 31-01-2015 , Fakulti / Institut / Pusat Perkhidmatan |