Untuk Kegunaan UKM sahaja

For UKM use only

Curriculum Vitae


MAKLUMAT ASAS

PROF. MADYA DR. WAN MOHD FAIZAL BIN WAN MAHMOOD

PENSYARAH UNIVERSITI
JABATAN KEJURUTERAAN MEKANIKAL & PEMBUATAN
faizal.mahmood@ukm.edu.my
No.rasmi UKM : 03 8921 5555
BIOGRAFI /BIOGRAPHY

PENSYARAH UNIVERSITI

KELAYAKAN AKADEMIK / ACADEMIC QUALIFICATION
(Bidang Pengajian),(Peringkat),(Institusi),(Tahun)
KEJURUTERAAN , Doktor Falsafah , UNIVERSITY OF NOTTINGHAM , 2012
Sarjana , KOBE UNIV. OF MERCANTILE MARINE , 2002
Sarjana Muda , COLUMBIA UNIVERSITY , 1995
PENERBITAN TERKINI / LATEST PUBLICATION

Penerbitan Berimpak Tinggi

Norhidayah Mat Taib, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor.  (2022).  Combustion Characteristics Of Hydrogen Direct Injection In A Helium-oxygen Compression Ignition Engine.  - Energy Reports.  494-511. 
Jaharah A. Ghani, Yap Pin Han, Wan Mohd. Faizal Wan Mahmood.  (2022).  Study On Liquid Nano-atomization Systems For Minimum Quantity Lubrication - A Review.  - The International Journal Of Advanced Manufacturing Technology.  5637-5649. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Raheem K. Ajeel.  (2022).  Effects Of Design Parameters On Flow Fields And Heat Transfer Characteristics In Semicircle Oblique Finned Corrugated.  - International Communications In Heat And Mass Transfer.  1-20. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Bin Wan Mahmood, Raheem K. Ajeel.  (2022).  Structure Parameters And Designs And Their Impact On Performance Of Different Heat Exchangers: A Review.  - Renewable And Sustainable Energy Reviews.  1-21. 
Pin Han Yap, Jaharah A. Ghani, Wan Md. Faizal Wan Mahmood.  (2022).  Optimisation On The Performance Of Bubble-bursting Atomisation For Minimum Quantity Lubrication With Vegetable Oil Using Computational Fluid Dynamics Simulation.  - Materials.  1-17. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2021).  Combustion Characteristics Of Hydrogen In A Noble Gas Compression Ignition Engine.  - Energy Reports.  200-218. 
Alias Jedi, Noorhelyna Razali, Wan Mohd Faizal Wan Mahmood, Nor Ashikin Abu Bakar.  (2019).  Statistical Criteria Of Nanofluid Flows Over A Stretching Sheet With The Effects Of Magnetic Field And Viscous Dissipation.  - Symmetry.  1-17. 
J.a. Ghani, M.n.a.m. Dali, H.a. Rahman, C.h.c. Haron, W.m.f. Wan Mahmood,m.r.m. Rasani, M.z. Nuawi.  (2019).  Analysis Of Dimple Structure Fabricated Using Turning Process And Subsequent Reduction In Friction.  - Wear.  1280-1285. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2019).  Modification Of A Direct Injection Diesel Engine In Improving The Ignitability And Emissions Of Diesel-ethanol-palm Oil Methyl Ester Blends.  - Energies.  1-21. 
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2018).  Simulation Of The Combustion Process For A Ci Hydrogen Engine In An Argon-oxygen Atmosphere.  - International Journal Of Hydrogen Energy. 
Javad Zareei, Abbas Rohani, Wan Mohd Faizal Wan Mahmood.  (2018).  Simulation Of A Hydrogen/natural Gas Engine And Modelling Of Engine Operating Parameters.  - International Journal Of Hydrogen Energy. 
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali.  (2016).  Effect Of Fuel Injection Timings On Performance And Emissions Of Stratified Combustion Cngdi Engine.  - Applied Thermal Engineering.  619-629. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Ramizi Mohamed, Mohd Tusirin Mohd Nor.  (2016).  Performance Of Oil Palm Kernel Shell Gasification Using A Medium-scale Downdraft Gasifier.  - International Journal Of Green Energy.  513-520. 
Mohd Nizam Ab Rahman, Raden Achmad Chairdino Leuveano, Fairul Azni Bin Jafar, Chairul Saleh, Baba Md Deros, Wan Mohd Faizal Wan Mahmood, Wan Hasrulnizzam Wan Mahmood.  (2016).  Incorporating Logistic Costs Into A Single Vendor Buyer Jels Model.  - Applied Mathematical Modelling.  10809-10819. 
Hyder H. Balla, Shahrir Abdullah, Wan Mahmood Wan Mohd Faizal, Rozli Zulkifli, Kamaruzaman Sopian.  (2015).  Enhancement Of Heat Transfer Coefficient Multi-metallic Nanofluid With Anfis Modeling For Thermophysical Properties.  - Thermal Science.  1613-1620. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Ramizi Mohamed, Mohd Tusirin Mohd Nor.  (2015).  Performance Of Oil Palm Frond Gasification Using Medium-scale Downdraft Gasification For Electricity Generation.  - Iet Renewable Power Generation.  228-235. 
Mohd Nizam Ab. Rahman, Noor Suhana Mohd Zubir, Raden Achmad Chairdino Leuveano, Jaharah A. Ghani And Wan Mohd Faizal Wan Mahmood.  (2014).  Reliability Study Of Solder Paste Alloy For The Improvement Of Solder Joint At Surface Mount Fine-pitch Components.  - Materials.  7706-7721. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Numerical Study Of The Enhancement Of Heat Transfer For Hybrid Cuo-cu Nanofluids Flowing In A Circular Pipe.  - Journal Of Oleo Science.  62(7):533-539. 

Penerbitan WOS

Javad Zareei, Abbas Rohani, Wan Mohd Faizal Bin Wan Mahmood, Shahrir Abdullah.  (2020).  Effect Of Ignition Timing And Hydrogen Fraction In Natural Gas Blend On Performance And Exhaust Emissions In A Di Engine.  - Iranian Journal Of Science And Technology, Transactions Of Mechanical Engineering.  737-747. 
Raden Achmad Chairdino Leuveano, Mohd Nizam Ab Rahman, Wan Mohd Faizal Wan Mahmood And Chairul Saleh.  (2019).  Integrated Vendor Buyer Lot Sizing Model With Transportation And Quality Improvement Consideration Under Just In Time Problem.  - Mathematics.  944-969. 
Zambri Harun, Ng Jie Suang, W. M. Faizal W. Mahmood, Mahir Faris Abdullah & Eslam Reda Lotfy.  (2019).  Computational Fluid Dynamics Simulation On The Heat Sink Performance Of A Graphics Processing Unit Thermal Management.  - Jurnal Kejuruteraan.  139-147. 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2019).  Study On Soot Mass Fraction And Size Distribution In A Direct Injection Diesel Engine Using Particulate Size Mimic Soot Model.  - Journal Of Thermal Science And Engineering Applications. 
Haniff Abdul Rahman, Jaharah A. Ghani, Wan Mohd Faizal Wan Mahmood, Mohammad Rasidi Mohammad Rasani,.  (2019).  Computational Fluid Dynamic Study On The Tribological Performance Of Dimple-textured Surface Fabricated Using The Turning Process.  - Industrial Lubrication And Tribology.  594-602. 
M. A. Zuber, W. M. F. Wan Mahmood, Z. Harun, Z. Z. Abidin.  (2018).  Soot Particle Size Distribution Near The Cylinder Wall In A Direct Injection Diesel Engine.  - Journal Of Engineering Science And Technology. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Zambri Harun, Ramizi Mohamed.  (2017).  Medium-scale Gasification Of Oil Palm Empty Fruit Bunch For Power Generation.  - Journal Of Material Cycles And Waste Management.  1244-1252. 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias.  (2017).  Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser.  - Industrial Lubrication And Tribology.  409-413. 
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali.  (2016).  The Effect Of Injection Timings On Performance And Emissions Of Compressed Natural-gas Direct Injection Engine.  - Journal Of Combustion.  1-7. 
L. H. Jawad, S. Abdullah, R. Zulkifli, W. M. F. W. Mahmood.  (2014).  Numerical Study On The Effect Of Interaction Vaned Diffuser With Impeller On The Performance Of A Modified Centrifugal Compressor.  - Journal Of Mechanics.  30(2): 113-122. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Modelling And Measuring The Thermal Conductivity Of Multi-metallic Zn/cu Nanofluid.  - Research On Chemical Intermediates.  39(6):2801-2815. 
Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Effect Of Reynolds Number On Heat Transfer And Flow For Multi-oxide Nanofluids Using Numerical Simulation.  - Research On Chemical Intermediates.  39(5):2197-2210. 

Penerbitan SCOPUS/ERA

Ahmad Faizal Zamli, W. M. F. Wan Mahmood, W. A. W. Ghopa, M. T. Lim.  (2022).  Investigation Of Leaching On The Elemental Composition Of Alternative Fuels.  - International Journal Of Advanced And Applied Sciences.  155-165. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Bin Wan Mahmood, Raheem K. Ajeel.  (2022).  Structure Parameters And Designs And Their Impact On Performance Of Different Heat Exchangers: A Review.  - Renewable And Sustainable Energy Reviews.  1-21. 
Norhidayah Mat Taib, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor.  (2022).  Combustion Characteristics Of Hydrogen Direct Injection In A Helium-oxygen Compression Ignition Engine.  - Energy Reports.  494-511. 
Pin Han Yap, Jaharah A. Ghani, Wan Md. Faizal Wan Mahmood.  (2022).  Optimisation On The Performance Of Bubble-bursting Atomisation For Minimum Quantity Lubrication With Vegetable Oil Using Computational Fluid Dynamics Simulation.  - Materials.  1-17. 
Jaharah A. Ghani, Yap Pin Han, Wan Mohd. Faizal Wan Mahmood.  (2022).  Study On Liquid Nano-atomization Systems For Minimum Quantity Lubrication - A Review.  - The International Journal Of Advanced Manufacturing Technology.  5637-5649. 
Hind Azeez Mohammed Hussein, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Raheem K. Ajeel.  (2022).  Effects Of Design Parameters On Flow Fields And Heat Transfer Characteristics In Semicircle Oblique Finned Corrugated.  - International Communications In Heat And Mass Transfer.  1-20. 
Fatin Farhanah Zulkurnai, Wan Mohd Faizal Wan Mahmood, Norhidayah Mat Taib, Mohd Radzi Abu Mansor.  (2021).  Simulation Of Combustion Process Of Diesel And Ethanol Fuel In Reactivity Controlled Compression Ignition Engine.  - Cfd Letters.  1-11. 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2021).  Cngdi Engine Performance Using A Vaned Diffuser Turbocharger Compressor With Varying Injection Timings.  - Evergreen Joint Journal Of Novel Carbon Resource Sciences & Green Asia Strategy.  414-420. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2021).  Combustion Characteristics Of Hydrogen In A Noble Gas Compression Ignition Engine.  - Energy Reports.  200-218. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2020).  Simulation Of Hydrogen Fuel Combustion In Neon-oxygen Compression Ignition Engine.  - Cfd Letters.  1-16. 
Muhammad Asyraf Mohd Azmi, Wan Mohd Faizal Wan Mahmood, Jaharah A. Ghani, Mohammad Rasidi Mohammad Rasani.  (2020).  A Review Of Surface Texturing In Internal Combustion Engine Piston Assembly.  - International Journal Of Integrated Engineering.  146-163. 
Javad Zareei, Abbas Rohani, Wan Mohd Faizal Bin Wan Mahmood, Shahrir Abdullah.  (2020).  Effect Of Ignition Timing And Hydrogen Fraction In Natural Gas Blend On Performance And Exhaust Emissions In A Di Engine.  - Iranian Journal Of Science And Technology, Transactions Of Mechanical Engineering.  737-747. 
Raden Achmad Chairdino Leuveano, Mohd Nizam Ab Rahman, Wan Mohd Faizal Wan Mahmood And Chairul Saleh.  (2019).  Integrated Vendor Buyer Lot Sizing Model With Transportation And Quality Improvement Consideration Under Just In Time Problem.  - Mathematics.  944-969. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2019).  Modification Of A Direct Injection Diesel Engine In Improving The Ignitability And Emissions Of Diesel-ethanol-palm Oil Methyl Ester Blends.  - Energies.  1-21. 
Haniff Abdul Rahman, Jaharah A. Ghani, Wan Mohd Faizal Wan Mahmood, Mohammad Rasidi Mohammad Rasani,.  (2019).  Computational Fluid Dynamic Study On The Tribological Performance Of Dimple-textured Surface Fabricated Using The Turning Process.  - Industrial Lubrication And Tribology.  594-602. 
Alias Jedi, Noorhelyna Razali, Wan Mohd Faizal Wan Mahmood, Nor Ashikin Abu Bakar.  (2019).  Statistical Criteria Of Nanofluid Flows Over A Stretching Sheet With The Effects Of Magnetic Field And Viscous Dissipation.  - Symmetry.  1-17. 
J.a. Ghani, M.n.a.m. Dali, H.a. Rahman, C.h.c. Haron, W.m.f. Wan Mahmood,m.r.m. Rasani, M.z. Nuawi.  (2019).  Analysis Of Dimple Structure Fabricated Using Turning Process And Subsequent Reduction In Friction.  - Wear.  1280-1285. 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2019).  Study On Soot Mass Fraction And Size Distribution In A Direct Injection Diesel Engine Using Particulate Size Mimic Soot Model.  - Journal Of Thermal Science And Engineering Applications. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Nik Rosli Abdullah.  (2018).  Combustion Characteristics Of A Direct Injection Diesel Engine Fueled With Diesel-ethanol-palm Oil Methyl Ester Blends.  - International Journal Of Engineering & Technology. 
Muhammad Asyraf Mohd Azmi, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Taib Iskandar Mohamad.  (2018).  Numerical Study Of The Effect Of Injection Strategy And Compression Ratio On Gasoline/diesel Fueled Rcci Engine.  - Sae Technical Papers. 
Javad Zareei, Abbas Rohani, Wan Mohd Faizal Wan Mahmood.  (2018).  Simulation Of A Hydrogen/natural Gas Engine And Modelling Of Engine Operating Parameters.  - International Journal Of Hydrogen Energy. 
Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Nik Rosli Abdullah.  (2018).  Simulation Of Injection Development Of Diesel-ethanol-palm Oil Methyl Ester Blend In Direct Injection Diesel Engine.  - Journal Of Mechanical Engineering. 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias.  (2018).  Investigation Of The Pressure Ratio And Efficiency Of A Turbocharger Centrifugal Compressor With A Vaned Diffuser.  - World Review Of Science, Technology And Sustainable Development. 
Eslam R. Lotfy, Wan Mohd. Faizal Wan Mahmood, Rozli Zulkifli Dan Zambri Harun.  (2018).  Cfd Simulation Of Automotive Pollutant Dispersion In High-rise Building Urban Environment Under Deeply Stable Atmospheric Condition.  - International Journal Of Engineering And Technology (uae). 
Norhidayah Mat Taib; Mohd Radzi Abu Mansor; Wan Mohd Faizal Wan Mahmood; Nik Rosli Abdullah.  (2018).  Simulation Study Of Combustion Characteristics Of Diesel- Ethanol-palm Oil Methyl Ester Blends In Diesel Engine.  - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 
Mohammad Rasidi Rasani, Azhari Shamsudeen, Zambri Harun, Wan Mohd Faizal Wan Mahmood.  (2018).  A Computational Aerodynamic Study Of Tandem Rotating Wheels In Contact With The Ground.  - International Journal Of Engineering & Technology. 
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood.  (2018).  Simulation Of The Combustion Process For A Ci Hydrogen Engine In An Argon-oxygen Atmosphere.  - International Journal Of Hydrogen Energy. 
Haniff Abdul Rahman, Jaharah A. Ghani, Wan Mohd Faizal Wan Mahmood.  (2018).  A Brief Review On Friction Reduction Via Dimple Structure For Piston Engine.  - World Review Of Science, Technology And Sustainable Development. 
M. A. Zuber, W. M. F. Wan Mahmood, Z. Harun, Z. Z. Abidin.  (2018).  Soot Particle Size Distribution Near The Cylinder Wall In A Direct Injection Diesel Engine.  - Journal Of Engineering Science And Technology. 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2017).  Comparison Of Simple And Detailed Soot Models In The Study Of Soot Formation In A Compression Ignition Diesel Engine.  - Sae International.  1-9. 
Noor Atikah Abdullah,ramizi Mohamed, Wan Mohd Faizal Wan Mahmood,mohamad Hanif Md Saad.  (2017).  Black Smoke Elimination Via Pid Controlled Co-firing Technique At Palm Oil Mill.  - International Journal Of Applied Engineering Research.  8050-8056. 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias.  (2017).  Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser.  - Industrial Lubrication And Tribology.  409-413. 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Mohd Fadzli Bin Abdollah, Rizalman Mamat, Azri Alias.  (2017).  Effect Of Vaned Diffuser On The Performance Of Small Turbocharger.  - Journal Of Mechanical Engineering.  227-236. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Zambri Harun, Ramizi Mohamed.  (2017).  Medium-scale Gasification Of Oil Palm Empty Fruit Bunch For Power Generation.  - Journal Of Material Cycles And Waste Management.  1244-1252. 
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali.  (2016).  Comparative Analysis Of Performance And Emission Of A Homogenous Combustion Compressed Natural-gas Direct Injection Engine.  - International Journal Of Mechanical & Mechatronics Engineering.  173-183. 
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali.  (2016).  The Effect Of Injection Timings On Performance And Emissions Of Compressed Natural-gas Direct Injection Engine.  - Journal Of Combustion.  1-7. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Ramizi Mohamed, Mohd Tusirin Mohd Nor.  (2016).  Performance Of Oil Palm Kernel Shell Gasification Using A Medium-scale Downdraft Gasifier.  - International Journal Of Green Energy.  513-520. 
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Fadzli Ibrahim, Shahrir Abdullah, Kamaruzzaman Sopian.  (2016).  Numerical Study Of Hydrogen Fuel Combustion In Compression Ignition Engine Under Argon-oxygen Atmosphere.  - Jurnal Teknologi.  77-83. 
Zambri Harun, Wan Aizon W. Ghopa, Shahrir Abdullah, M. Izhar Ghazali, Ashraf Amer Abbas, Mohd Rasidi Rasani, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor, Zulkhairi Zainol Abidin.  (2016).  The Development Of A Multi Purpose Wind Tunnel.  - Jurnal Teknologi.  63-70. 
Mohd Nizam Ab Rahman, Raden Achmad Chairdino Leuveano, Fairul Azni Bin Jafar, Chairul Saleh, Baba Md Deros, Wan Mohd Faizal Wan Mahmood, Wan Hasrulnizzam Wan Mahmood.  (2016).  Incorporating Logistic Costs Into A Single Vendor Buyer Jels Model.  - Applied Mathematical Modelling.  10809-10819. 
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali.  (2016).  Effect Of Fuel Injection Timings On Performance And Emissions Of Stratified Combustion Cngdi Engine.  - Applied Thermal Engineering.  619-629. 
F. Ibrahim, W.m.f. Wan Mahmood, S. Abdullah And M.r. Abu Mansor.  (2016).  Numerical Investigation Of Soot Mass Concentration In Compression Ignition Diesel Engine.  - Journal Of Mechanical Engineering And Sciences (jmes).  2275-2287. 
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Masahiro Shioji.  (2016).  Simulation Of The Effect Of Initial Temperature And Fuel Injection Pressure On Hydrogen Combustion Characteristics In Argon-oxygen Compression Ignition Engine.  - Sae Technical Papers.  1-8. 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2016).  Soot Particle Measurement In Engine Cylinder: A Review.  - Jurnal Teknologi.  187-195. 
Zakaria Jusoh, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor.  (2016).  Performance Of Solar-assisted Absorption Cycle Air Conditioning System.  - Jurnal Teknologi.  121-126. 
Adnan Kadhim Rashid, Mohd Radzi Abu Mansor, W Ghopa Wan Aizon, Zambri Harun, Wan Mohd Faizal Wan Mahmood.  (2016).  An Experimental Study Of The Performance And Emissions Of Spark Ignition Gasoline Engine.  - International Journal Of Automotive And Mechanical Engineering.  3540-3554. 
M. Siba, W. Wanmahmood, M. Zaki Nuawi, R. Rasani, M. Nassir.  (2016).  Flow-induced Vibration In Pipes: Challenges And Solutions - A Review.  - Journal Of Engineering Science And Technology.  362-382. 
Mohd Radzi Abu Mansor; Tan Chun Hyiin; Nik Muhammad Hafiz; Wan Mohd Faizal Wan Mahmood; W Ghopa Wan Aizon; Shahrir Abdullah.  (2015).  Fundamental Study On Combustion Characteristics Of Direct Injection Gaseous Fuel.  - Arpn Journal Of Engineering And Applied Sciences.  7375-7379. 
W.m.f Wan Mahmood, J.a. Ghani, N. Saibani, Z. Harun, A.b. Sulong, M.j. Ghazali, M.r.a. Mansor, S. Abdullah.  (2015).  Performance Of Undergraduate Students In Conducting Research In Two Engineering Programmes.  - Journal Of Engineering Science And Technology.  52-60. 
Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, Mohd Z. Nuawi, Rasidi Rasani, And Mohamed H. Nassir.  (2015).  Modeling And Applications Of 3d Flow In Orifice Plate At Low Turbulent Reynolds Numbers.  - International Journal Of Mechanical And Mechatronics Engineering.  19-25. 
Md Ishak N.a.i., Raman I.a., Yarmo M.a., Wan Mahmood W.m.f..  (2015).  Ternary Phase Behavior Of Water Microemulsified Diesel-palm Biodiesel.  - Frontiers In Energy.  162-169. 
Z. Harun, H. Hashim, N. Saibani, W. M. F. Wan Mahmood.  (2015).  Effectiveness Of Teaching Technics In Sustainability Topics.  - Journal Of Engineering Science And Technology.  61-67. 
W. M. F. W. Mahmood, M. A. Ariffin, Z. Harun, N. A. I. Md. Ishak, J. A. Ghani, M. N. Ab. Rahman.  (2015).  Characterisation And Potential Use Of Biochar From Gasified Oil Palm Wastes.  - Journal Of Engineering Science And Technology.  45-54. 
Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, Mohd Z. Nuawi, Rasidi Rasani, And Mohamed H. Nassir.  (2015).  Wall Pressure Due To Turbulent Flow Through Orifice Plate.  - International Journal Of Mechanical & Mechatronics Engineering.  36-41. 
Muhammad Ahmar Zuber, Wan Mohd Faizal Wan Mahmood, Zambri Harun, Zulkhairi Zainol Abidin.  (2015).  Soot Particle Evolution And Transport In A Direct Injection Diesel Engine.  - Jurnal Teknologi.  85-88. 
Hyder H. Balla, Shahrir Abdullah, Wan Mahmood Wan Mohd Faizal, Rozli Zulkifli, Kamaruzaman Sopian.  (2015).  Enhancement Of Heat Transfer Coefficient Multi-metallic Nanofluid With Anfis Modeling For Thermophysical Properties.  - Thermal Science.  1613-1620. 
Nizaroyani Saibani,muhammad Idham Sabtu,zambri Harun, Wan Mohamad Faizal Wan Mahmood,norhamidi Muhamad Dan Jaafar Sahari.  (2015).  Comparison Of Emotional Intelligence Scores Among Engineering Students Of An Academic Programme.  - Journal Of Engineering Science And Technology.  41-51. 
Zuber M.a., Wan Mahmood W.m.f., Harun Z., Zainol Abidin Z., La Rocca A., Shayler P., Bonatesta F..  (2015).  Modeling Of In-cylinder Soot Particle Size Evolution And Distribution In A Direct Injection Diesel Engine.  - Sae Technical Papers. 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2015).  A Review Of Soot Particle Measurement In Lubricating Oil.  - Defense S&t Technical Bulletin.  141-152. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Ramizi Mohamed, Mohd Tusirin Mohd Nor.  (2015).  Performance Of Oil Palm Frond Gasification Using Medium-scale Downdraft Gasification For Electricity Generation.  - Iet Renewable Power Generation.  228-235. 
Hastinatun Mukayat, Ismail Ab. Raman, Khairiah Badri, Wan Mohd Faizal Wan Mahmood And Suria Ramli.  (2015).  The Influence Of Water In Water-microemulsified-diesel And Its Impact On Fuel Properties And Engine Performance.  - The Malaysian Journal Of Analytical Sciences.  251-260. 
Javad Zareei, Faizal Wan Mahmood, Shahrir Abdullah, Yusoff Ali, Taib Iskandar Mohamed.  (2014).  Prediction Of Performance A Direct Injection Engine Fueled With Natural Gas-hydrogen Blends.  - International Journal Of Mechanical And Mechatronics Engineering.  14(2):1-8. 
Afida Ayob, Wan Mohd Faizal Wan Mahmood, Azah Mohamed, Mohd Zamri Che Wanik, Mohd Fadzil Mohd Siam, Saharuddin Sulaiman, Abu Hanifah Azit, Mohamed Azrin Mohamed Ali.  (2014).  Review On Electric Vehicle, Battery Charger, Charging Station And Standards.  - Research Journal Applied Sciences, Engineering And Technology.  7(2):364-373. 
Saad Aljamali, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah And Yusoff Ali.  (2014).  Comparison Of Performance And Emission Of A Gasoline Engine Fuelled By Gasoline And Cng Under Various Throttle Positions.  - Journal Of Applied Sciences.  14(4): 386-390. 
Ali Nurrakhmad Siregar, Wan Mohd Faizal Wan Mahmod, Jaharah A. Ghani, Che Hassan Che Haron, Muhammad Rizal.  (2014).  Design And Analysis Of Single Screw Extruder For Jatropha Seeds Using Finite Element Method.  - Research Journal Of Applied Sciences, Engineering And Technology.  7(10):2098-2105. 
Javad Zareei, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Yusoff Ali.  (2014).  Effect Of Hydrogen On Natural Gas Fueled Direct Injection Engine, A Theoretical Study.  - Australian Journal Of Basic And Applied Sciences.  8-13. 
L. H. Jawad, S. Abdullah, R. Zulkifli, W. M. F. W. Mahmood.  (2014).  Numerical Study On The Effect Of Interaction Vaned Diffuser With Impeller On The Performance Of A Modified Centrifugal Compressor.  - Journal Of Mechanics.  30(2): 113-122. 
Muhammad A. Zuber, Wan Mohd F. Wan Mahmood, Zulkhairi Zainol Abidin And Zambri Harun.  (2014).  In-cylinder Soot Particle Distribution In Squish Region Of A Direct Injection Diesel Engine.  - International Journal Of Mechanical & Mechatronics Engineering.  8. 
Mohd Radzi Abu Mansor, Nor Afzanizam Samiran, Wan Mohd Faizal Wan Mahmood, Raja Nazatul Akhma.  (2014).  Effect Of Injector Nozzle Design On Spray Characteristics For Hydrogen Direct Injection Engine Conditions.  - Applied Mechanics And Materials.  406-410. 
Zambri Harun, Mohd Faruq Abdul Latif, Mohammad Rasidi Rasani Dan Wan Mohd Faizal Wan Mahmood.  (2014).  Skin Friction Impacts On Fuel Consumption.  - International Journal Of Vehicle Systems Modelling And Testing.  281. 
Mohd Nizam Ab. Rahman, Noor Suhana Mohd Zubir, Raden Achmad Chairdino Leuveano, Jaharah A. Ghani And Wan Mohd Faizal Wan Mahmood.  (2014).  Reliability Study Of Solder Paste Alloy For The Improvement Of Solder Joint At Surface Mount Fine-pitch Components.  - Materials.  7706-7721. 
Muhammad Afif Ariffin, Wan Mohd Faizal Wan Mahmood, Mohd Tusirin Mohd Nor, Ramizi Mohamed.  (2014).  Potential Of Oil Palm Empty Fruit Bunch (efb) Biochar From Gasification Process.  - Australian Journal Of Basic And Applied Sciences.  149-152. 
M.h Hanafi, W.m.f Wan Mahmood, A. Roslizar, M.s Zakaria, M.n.a Saadun And S.a. Rafeq.  (2013).  Analysis Of Soot Particle Movement In Diesel Engine Under The Influence Of Drag Force.  - Applied Mechanics And Materials.  275-280. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Modelling And Measuring The Thermal Conductivity Of Multi-metallic Zn/cu Nanofluid.  - Research On Chemical Intermediates.  39(6):2801-2815. 
Layth H. Jawad, S. Abdullah, R. Zulkifli, And W.m.f.w. Mahmood.  (2013).  Numerical Investigation On The Effect Of Impeller Trimming On The Performance Of A Modified Compressor.  - Cfd Letters.  5(4):174-178. 
Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Numerical Study Of The Enhancement Of Heat Transfer For Hybrid Cuo-cu Nanofluids Flowing In A Circular Pipe.  - Journal Of Oleo Science.  62(7):533-539. 
Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian.  (2013).  Effect Of Reynolds Number On Heat Transfer And Flow For Multi-oxide Nanofluids Using Numerical Simulation.  - Research On Chemical Intermediates.  39(5):2197-2210. 
Jawad, L.h., Abdullah, S., Zulkifli, R., Mahmood, W.m.f.w..  (2012).  Modelling Of Centrifugal Compressor Impellers Using Adaptive Neuro- Fuzzy Inference Systems (anfis).  - International Review Of Mechanical Engineering.  6(5):1011-1017. 
Jawad, L.h., Abdullah, S., Zulkifli, R., Mahmood, W.m.f.w..  (2012).  Prediction Of Centrifugal Compressor Performance By Using Adaptive Neuro-fuzzy Inference System (anfis).  - International Review On Modelling And Simulations.  5(4):1580-1587. 
Hyder H. Balla, Shahrir Abdullah, Rozli Zulkifli, Wan Mohd Faizal And Kamaruzzaman Sopian.  (2012).  Effect Of Oxides Nanoparticle Materials On The Pressure Loss And Heat Transfer Of Nanofluids In Circular Pipes.  - Journal Of Applied Sciences.  12(13):1396-1401. 
A.f.a. Rasid, T.i. Mohamad, M.j. Ghazali And W.m.f.w. Mahmood.  (2012).  Effects Of Lubricant Temperature In A Motorized Engine.  - World Applied Sciences Journal.  927-930. 
Layth H. Jawad, S. Abdullah, R. Zulkifli And W.m.f.w. Mahmood.  (2012).  Numerical Simulation Of Flow Inside A Modified Turbocharger Centrifugal Compressor.  - Asian Journal Of Applied Sciences.  5(8):563-572. 

Prosiding Terindeks

Norhidayah Mat Taib; Mohd Radzi Abu Mansor; Wan Mohd Faizal Wan Mahmood.  (2020).  Combustion Characteristics Of Direct Injection Hydrogen In Noble Gases Atmosphere.  - Iop Conference Series: Earth And Environmental Science.  1-6. 
Norhidayah Mat Taib; Mohd Radzi Abu Mansor; Wan Mohd Faizal Wan Mahmood; Nik Rosli Abdullah.  (2019).  Simulation Of Optimizing Diesel-ethanol-palm Oil Methyl Ester Blends Combustibility In Direct Injection Diesel Engine.  - Iop Conference Series: Earth And Environmental Science.  1-6. 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Mansor & Mohd Fadzli Abdollah.  (2017).  Experimental Investigation Of Performance And Emissions Of A Stratified Charge Cng Direct Injection Engine With Turbocharger.  - Matec Web Of Conferences Volume 124 (2017) 6th International Conference On Transportation And Traffic Engineering (ictte 2017).  1-5. 
Norhidayah Mat Taib; Mohd Radzi Abu Mansor; Wan Mohd Faizal Wan Mahmood; Fais Ahmad Shah; Nik Rosli Nik Abdullah.  (2017).  Investigation Of Diesel-ethanol Blended Fuel Properties With Palm Methyl Ester As Co-solvent And Blends Enhancer.  - Matec Web Of Conferences.  1-11. 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2017).  Numerical Investigation On Soot Particles Emission In Compression Ignition Diesel Engine By Using Particulate Mimic Soot Model.  - Matec Web Of Conferences: The 2nd International Conference On Automotive Innovation And Green Vehicle (aigev 2016).  1-11. 
Mohammad Rasidi Rasani, Mohd. Zaki Nuawi, Wan Mohd Faizal Wan Mahmood, Zambri Harun..  (2016).  A Computational Study On Effect Of Pitch Difference In Pure Plunging Tandem Wings..  - Innovation In Aerospace Engineering And Technology.  1-10. 
Mohamed Abed Alabas Siba, Wan Mohd Faizal Wan Mahmood, Mohd Zaki Nuawi, Rasidi Rasani, Mohamed Nassir.  (2016).  Investigation Of Physical And Mechanical Properties Of 3-d Turbulent Flow In Orifice Pipe.  - Applied Mechanics And Materials.  330-334. 
Lok Bee Seng, Muhammad Ahmar Zuber, Wan Mohd Faizal Wan Mahmood, Zulkhairi Zainol Abidin And Zambri Harun.  (2014).  Interpolation Techniques In Computational Particle Tracking Inside A Direct-injection Diesel Engine Cylinder.  - Applied Mechanics And Materials/ Trans Tech Publications, Switzerland.  381-386. 
Muhammad Faiz Abdul Hamid, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor And Shahrir Abdullah.  (2014).  Public Perception And Acceptance Of Diesel-powered Passenger Cars In Malaysia : An Initial Study.  - Applied Mechanics And Materials / Trans Tech Publications, Switzerland.  49-53. 
Zambri Harun, Muhammad Syafiq, Mohd Rasidi Rasani, Shahrum Abdullah, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mariyam Jameelah Ghazali, Che Husna Azhari, Mohd Radzi Abu Mansor, Zulkhairi, Ashraf.  (2014).  Skin Friction Coefficient And Boundary Layer Trend On Ukm Aster I-bond.  - Applied Mechanics And Materials.  450-455. 
M.h.m. Hanafi, W.m.f Wan Mahmood, Mohd Fadzli Bin Abdollah, S.a. Rafeq, N.f.m. Nor, Z. M. Zulfattah, S.a. Shamsudin, A. Ibrahim.  (2013).  Comparison Of Soot Particle Movement Based On Crank Angle.  - Procedia Engineering - The Malaysian International Tribology Conference 2013 (mitc2013).  245-250. 
M H M Hafidzal, W M F W Mahmood, M Z A Manaf, M S Zakaria, M N A Saadun And M N A Nordin.  (2013).  Soot Particle Trajectories Of A Di Diesel Engine At 18 Atdc Crankshaft Angle.  - Iop Conference Series : Materials Science And Engineering - 2nd International Conference On Mechanical Engineering Research (icmer 2013).  1-6. 
Javad Zareei, Yusoff Ali, Shahrir Abdullah And Faizal Wan Mahmood.  (2012).  Comparing The Effects Of Hydrogen Addition On Performance And Exhaust Emission In A Spark Ignition Fueled With Gasoline And Cng.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 
Yusoff Ali, Azhari Shamsudeen, Shahrir Abdullah And Wan Mohd Faizal Wan Mahmood.  (2012).  Development Of Cng Direct Injection (cngdi) Clean Fuel System For Extra Power In Small Engine..  - The 4th International Meeting On Advances In Thermofluids (imat 2011) , Universiti Teknologi Malaysia. 
Azali Awaludin, Mohd Zaki Nuawi, Yusoff Ali, Wan Mohd Faizal W.m And Taib Iskandar Mohamad.  (2012).  A Study On Alternative Fuel Blending For Homogeneous Charge Compression Ignition (hcci) Engine Using Palm Oil Methyl Ester And Ron 97.  - Regional Conference On Automotive Research (recar) 2011; (applied Mechanics And Materials). 
Wan Mohd Faizal W.m., Mohd Anas M.s., Mohd Faizal M.t., Azli A., Rozli Z., Nordin J., Sallehuddin M.h., Rizauddin R., Shahrum A., Shahrir A. And Azhari S..  (2012).  Car Body And Chassis Development Of Ukm Carevo For Perodua Eco-challenge 2011.  - Regional Conference On Automotive Research, Recar 2011;kuala Lumpur (applied Mechanics And Materials). 

Buku Penyelidikan

Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Saad Aljamali & Azhari Shamsudeen.  (2017).  Advances In Natural Gas Emerging Technologies.  - 16. 

Bab Dalam Buku

Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Saad Aljamali & Azhari Shamsudeen.  (2017).  Advances In Natural Gas Emerging Technologies.  - 16. 

Penerbitan Lain-lain

Mohd Radzi Bin Abu Mansor;shahrir Bin Abdullah;wan Mohd Faizal Bin Wan Mahmood.  (2022).  Pencirian Nyalaan Pengoksidaan Deras Jet Hidrogen Dalam Enjin Hidrogen Peredaran Gas Adi.  -
Mohd Radzi Bin Abu Mansor;wan Mohd Faizal Bin Wan Mahmood;wan Aizon Bin W Ghopa.  (2021).  Kajian Ciri-ciri Pembakaran Dan Termo-fizikal Campuran Metil Ester Minyak Sawit-diesel-etanol Dalam Enjin Diesel Suntikan Langsung.  -
Jaharah Bt. A Ghani;che Hassan Bin Che Haron;siti Masrinda Bt. Tasirin;wan Mohd Faizal Bin Wan Mahmood.  (2020).  Performance Of Bio-metal Cutting Fluid From Treated Recycled Cooking Oil In Machining Ferrous And Non Ferrous Metal For Sustainable Manufacturing.  -
Shahrir Bin Abdullah;wan Mohd Faizal Bin Wan Mahmood;mohd Radzi Bin Abu Mansor.  (2018).  Kajian Kebolehbakaran Campuran Gas Asli Termampat Dan Hidrogen Di Dalam Bom Pembakaran Dan Enjin Cng-di.  -
H. Amiruddin, W.m.f.w. Mahmood, S. Abdullah, M.r.a Mansor, R. Mamat, A. Alias & M.f.b Abdollah.  (2017).  Performance And Emission Of Stratified Charge Cngdi Engine With Turbocharger.  - 2nd International Conference On Sustainable Mobility. 
Nur Hafizah Habideen, Wan Mohd Faizal Wan Mahmood, Zambri Harun, Muhammad Ahmar Zuber, Fadzli Ibrahim.  (2017).  Simulation Study Of Termophoresis Effect On The Movement Of Soot Particles In An Engine Cylinder.  - International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2017). 
Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias & Mohd Fadzli Abdollah.  (2017).  Performance Of Stratified Charged Cngdi Engine With Application Of Lsvd On Turbocharger Compressor.  - International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2017). 
F. Ibrahim, W. M. F. Wan Mahmood, S. Abdullah, M. R. A. Mansor.  (2016).  Investigation Of Soot Particles In Compression Ignition Diesel Engine By Cfd Simulation Using Particulate Mimic Soot Model.  - 2nd International Conference On Automotive Innovation And Green Energy Vehicle 2016 (aigev 2016). 
Ibrahim Fadzli, Wan Mahmood Wan Mohd Faizal, Abdullah Shahrir, Abu Mansor Mohd Radzi.  (2016).  Investigation Of Soot Particles In Compression Ignition Diesel Engine By Cfd Simulation Using Different Level Of Complexity Of Soot Models.  - Fisita World Automotive Congress 2016. 
Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Fadzli Ibrahim, Shahrir Abdullah, Kamaruzzaman Sopian.  (2015).  Preliminary Study Of Hydrogen Fuel Combustion In Compression Ignition Engine Under Argon-oxygen Atmosphere.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor.  (2015).  Investigation Of Soot Emission In Compression Ignition Diesel Engine By Cfd Simulation.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar2015). 
Zambri Harun, W. A. W. Ghopa, S. Abdullah, M. Izhar Ghazali, Ashraf A. Abbas, M. R Rasani, Rozli Zulkifli, W. M F. Wan Mahmood, M R Abu Mansor, Z. Z. Abidin And Wan Hanna Melini Wan Mohtar.  (2015).  The Development Of A Multi-purpose Wind Tunnel.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Muhammad Ahmar Zuber, Wan Mohd Faizal Wan Mahmood, Zambri Harun, Zulkhairi Zainol Abidin.  (2015).  Soot Particle Size Distribution Near The Cylinder Wall Boundary In A Direct Injection Diesel Engine.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Wan Mohd Faizal Bin Wan Mahmood, Ramizi Bin Mohamed, Mohd Tusirin Bin Mohd Nor.  (2015).  Power Generation From Agricultural-based Biomass As A Promising Green Technology Strategy.  -
Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, M. Z. Nuawi, Rasidi Rasani, Mohamed H. Nassir, And Nabeh N. Al Deroubi.  (2015).  Effect Of Induced Vibration On Flow Through A Pipe With Orifice.  - 5th International Conference On Noise, Vibration And Comfort (nvc 2015). 
Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali.  (2015).  Combustion Pressure Characteristics Of Homogeneous Combustion Compressed Natural-gas Direct Injection.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Adnan Kadhim Rashid, Mohd Radzi Abu Mansor, Wan Aizon Wan Ghopa, Zambri Harun, Wan Mohd Faizal Wan Mahmood.  (2015).  Combustion Characteristics Of Various Octane Rating Fuel For Energy Efficient Vehicle.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Mohd Radzi Abu Mansor, Mohd Shereen Zainuddin, Norhidayah Mat Taib, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Zul Ilham.  (2015).  Performance And Emission Of Biodiesel Fuel Direct Injection Compression Ignition Engine.  - 3rd International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar 2015). 
Ramizi Mohamed, Noor Atikah Abdullah, Wan Mohd Faizal Wan Mahmood, Mohd Tusirin Mohd Nor, Mohd Marzuki Mustafa, Mohd Ubaidillah Mustafa, Zulkarnain Atan, Mohd Amrin Abdullah, Ahmad Jaril Asis Et. Al.  (2014).  Proof Of Concept Of Mixed-fuel System For Black Smoke Elimination In A Palm Oil Mill.  - Persidangan Kebangsaan Kedua Program Pemindahan Ilmu (ktp 02). 
Wan Mohd Faizal Bin Wan Mahmood.  (2014).  Kajian Berkomputer Pergerakan Partikel Partikel Jelaga Dan Perubahan Saiz Partikel Jelaga Dalam Sebuah Enjin Diesel Suntuk.  -
Layth H. Jawad, Shahrir Abdullah, Rozli Zulkifli And Wan Mohd F. Wan Mahmood.  (2012).  Numerical Simulation Of Flow Inside A Vaned Diffuser Of A Modified Centrifugal Compressor.  - 18th Australasian Fluid Mechanics Conference (afmc). 
Y. Istihat, M. Z. Nuawi, A. R. Bahari And W. M. F. W. Mahmood.  (2011).  Development Of Ultrasonic Test Rig System For Fuel Injector.  - Regional Conference On Automotive Research (recar) 2011. 
Wan Mohd Faizal Wan Mahmood, Paul J. Shayler, Antonino La
rocca, And Fabrizio Bonatesta.  (2011).  Prediction Of In-cylinder Soot Particles Paths In A Di Diesel Engine.  - Regional Conference On Automotive Research (recar) 2011. 
Wan Mohd Faizal Wan Mahmood.  (2011).  Computational Studies Of Soot Paths To Cylinder Wall Layers Of A Direct Injection Diesel Engine.  -
A.f.a. Rasid, M.j. Ghazali, T.i. Mohamad & W.m.f.w. Mahmood.  (2011).  Pressure Behaviour Of Lubricant Oil During Engine Operation.  - Regional Tribology Conference 2011. 
Kamaruzzaman S, Mohd Yusof O, Baharudin Y, Wan Ramli W.d, Yusoff A, Zainol Abidin A.r, Shahrir A, Zahari I, Mohd Hafidz R, Mohd Fauzi M.z, Zuhairuse M.d, Mastor S, Mazlan M.t,..., Wan Mohd Faizal W.m,.  (2004).  Sustainable And Environment Friendly Solar Energy Technologies Research And Development In Universiti Kebangsaan Malaysia.  - National Conference On Engineering And Technology (nacet 2004). 
PROJEK PENYELIDIKAN / RESEARCH PROJECT
(Tajuk),(Peranan),(Tempoh),(Tahap)

Aktif

Development of sustainable nano size droplet delivery in Minimum quantity lubricant (MQL) system for machining application , Penyelidik Bersama , 01-10-2022 sehingga 30-09-2024 , Universiti
Elucidation of the characteristics of heat and mass transfer in square slots dehumidifier immersed in desiccant liquid for energy-efficient cooling , Penyelidik Bersama , 07-09-2021 sehingga 06-09-2024 , Kebangsaan
Investigation and Development of Wheel Liquid Desiccant Cooling System for Cooling Application in Buildings. , Penyelidik Bersama , 01-09-2021 sehingga 31-08-2023 , Universiti
The Basis of Statistical Mechanics for Thermodynamic Properties in Ferrofluids , Penyelidik Bersama , 01-08-2021 sehingga 31-07-2023 , Antarabangsa
Teknologi Sisa Sifar , Penyelidik Bersama , 01-02-2011 sehingga 31-12-2023 , Kebangsaan

Tamat

Investigation of thermal and hydrodynamics behavior of engine piston surfaces textured with dimples , Ketua Projek , 01-01-2019 sehingga 30-09-2022 , Kebangsaan
In situ Catalytic Cracking of Biomass to Plyols, Alcohol, Phenolics, Aromatic and Alkanes , Ketua Projek , 02-01-2014 sehingga 31-01-2017 , Kebangsaan
STRATIFIED CHARGE COMPRESSED NATURAL GAS DIRECT INJECTION WITH TURBOCHARGER FOR FUEL EFFICIENT ENGINE , Ketua Projek , 01-08-2013 sehingga 30-04-2016 , Kebangsaan
Numerical and Experimental Investigations on the Flow and Wall Deposition of Soot Particles in In-cylinder Turbulent Flow and the Boundary Layer , Ketua Projek , 01-04-2013 sehingga 31-03-2016 , Kebangsaan
Power Generation from Agricultural-based Biomass as a Promising Green Technology Strategy , Ketua Projek , 01-08-2012 sehingga 31-07-2015 , Universiti
Economic Feasibility and Preliminary Studies on the Potential of Biomass Gasification Plant Installation Based on Oil Palm Fronds and Alternative Feeds , Ketua Projek , 25-06-2012 sehingga 24-12-2013 , Universiti
KAJIAN BERKOMPUTER PERGERAKAN PARTIKEL PARTIKEL JELAGA DAN PERUBAHAN SAIZ PARTIKEL JELAGA DALAM SEBUAH ENJIN DIESEL SUNTUK , Ketua Projek , 19-12-2011 sehingga 18-06-2014 , Universiti
Numerical and Experimental Investigations on the Flow and Convective heat Transfer Characteristics of Biometallic nanofluids in Fully developed laminar Flow Regime , Ketua Projek , 06-06-2011 sehingga 17-01-2014 , Kebangsaan
Thermal Fatigue Resistance of Hybrid Nanofluids for Thin Film Applications , Penyelidik Bersama , 15-12-2020 sehingga 14-12-2022 , Universiti
Kajian Ciri-ciri Pembakaran dan Termo-Fizikal Campuran Metil Ester Minyak Sawit-Diesel-Etanol Dalam Enjin Diesel Suntikan Langsung , Penyelidik Bersama , 15-11-2018 sehingga 14-05-2021 , Universiti
Performance of bio-metal cutting fluid from treated recycled cooking oil in machining ferrous and non ferrous metal for sustainable manufacturing , Penyelidik Bersama , 16-10-2017 sehingga 17-10-2020 , Universiti
Pencirian Nyalaan Pengoksidaan Deras Jet Hidrogen dalam Enjin Hidrogen Peredaran Gas Adi , Penyelidik Bersama , 15-08-2017 sehingga 14-02-2021 , Kebangsaan
Sistem Kenderaan Lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti
Biohydrogen Purification, Storage, and Use in Fuel Cell , Penyelidik Bersama , 01-09-2014 sehingga 31-03-2019 , Kebangsaan
Biohydrogen purification, storage, and use in fuel cell , Penyelidik Bersama , 01-09-2014 sehingga 30-08-2017 , Kebangsaan
Lean Logistic and Quality Improvement to Increase the Performance of Manufacturing Industry , Penyelidik Bersama , 01-08-2014 sehingga 31-01-2017 , Universiti
Pembangunan dan Kebolehlaksanaan Elemen Kompleksiti dalam Pengajaran dan Pembelajaran Kejuruteraan , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Universiti
Sistem Kenderaan lestari Berkecekapan Tenaga Optimum , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
Probabilistic and Non-Probabilistic Formulation of Fatigue Behaviour in Multiscale Structure , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti
A Study on the Ignition and Combustion Characteristics of Biodiesel Oil in A Constant Volume Vessel , Penyelidik Bersama , 16-12-2013 sehingga 31-05-2017 , Kebangsaan
Kajian Kebolehbakaran Campuran Gas Asli Termampat dan Hidrogen di dalam Bom Pembakaran dan Enjin CNG-DI , Penyelidik Bersama , 01-11-2013 sehingga 31-10-2015 , Universiti
Projek Ilmiah sebagai Wadah Pencetus Amalan Penyelidikan dan Pembelajaran Berterusan , Penyelidik Bersama , 01-07-2013 sehingga 30-06-2014 , Universiti
THE EFFECTS OF SKYCRAPERS TO AIR FLOW STRUCTURES AND HEAT DISSIPATIONS , Penyelidik Bersama , 20-05-2013 sehingga 19-11-2016 , Kebangsaan
Vortex and drag control mechanism in turbulent flows using riblets , Penyelidik Bersama , 01-04-2013 sehingga 30-09-2016 , Kebangsaan
Heat Transfer in Hybrid Single-Phase Jet Impingement Micro-Channel for High Heat Flux Cooling , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2016 , Kebangsaan
SISTEM KENDERAAN BERKECEKAPAN BAHAN API OPTIMUM , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
PROBALISTIC AND NON-PROBALISTIC FORMULATION OF FATIGUE BEHAVIOUR IN MULTISCALE STRUCTURE , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti
PENGGUNAAN PENUNJUK PRESTASI SEBAGAI KAEDAH PENGUKURAN, PENILAIAN DAN PEMANTAUAN HASIL KURSUS YANG LEBIH BERKESAN. , Penyelidik Bersama , 22-11-2012 sehingga 22-11-2013 , Universiti
Development of Control System Technology for Black Smoke Eliminatiion in A Palm Oil Mill , Penyelidik Bersama , 17-07-2012 sehingga 16-01-2015 , Kebangsaan
Assessment of Energy and Process Efficiency in the Remanufacturing of Local Automative Engines for Sustainable Design Considerations , Penyelidik Bersama , 01-06-2012 sehingga 30-11-2015 , Kebangsaan
High Efficiency Thermoelectric Generator Output through Heat Transfer Enhancement , Penyelidik Bersama , 01-06-2012 sehingga 31-05-2014 , Kebangsaan
Projek Ilmiah Pendokong dan Pelengkap Aktiviti Penyelidikan Berkualiti Tinggi , Penyelidik Bersama , 01-06-2012 sehingga 01-06-2013 , Universiti
Remediation of Pollution from Large Point Sources for Sungai Hiliran - One State, One River Programme, Terengganu , Penyelidik Bersama , 01-07-2011 sehingga 31-07-2015 , Kebangsaan
The Study on Heat Transfer Effect on Vaporisation of Ammonia Sprayed over tube Bundles in Evaporator for Absorption air-conditioning System , Penyelidik Bersama , 06-06-2011 sehingga 05-06-2014 , Kebangsaan
Fundamental Studies on Multiple Steady and Pulse Jet Impingement Heat Transfer , Penyelidik Bersama , 06-06-2011 sehingga 05-06-2013 , Kebangsaan
Development of Green Value Chain Model in Aerospace Manufacturing Companies , Penyelidik Bersama , 20-08-2010 sehingga 19-08-2012 , Kebangsaan
ANUGERAH DAN PENGURUSAN / AWARD AND STEWARDSHIP
(Nama Anugerah/Pentadbiran),(Institusi Penganugerahan),(Tahun)

Anugerah UKM

Anugerah Penyelidikan / Solar hydrogen eco-house , 2004
Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2013
Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2020
PENYELIAAN PELAJAR / SUPERVISION

Pelajar Sarjana

AHMAD NAJMI NAQIUDDIN BIN CHE ROSLI, Sarjana
AZMAN BIN AZIZ, Sarjana
Angkatan Dan Pemasaan Injap Adaptif Berpandukan Tekanan Untuk Peningkatan, AHMAD FUAD BIN ABDUL RASID, Sarjana
Kajian Pembangunan Mikroemulsi Air / Surfaktan / Diesel-Biodiesel Sawit Yang Distabilkan Oleh Surfaktan Bukan Ionik Sebagai Bahan Api Enjin Diesel, NURUL ATIQAH IZZATI BINTI MD ISHAK, Sarjana
PEMBANGUNAN MIKROEMULSI DIESEL-MINYAK SAWIT OLEIN TERTAPIS DAN POTENSINYA SEBAGAI BAHAN API ALTERNATIF, HASTINATUN BTE MUKAYAT, Sarjana
Prestasi Penggasan Udara Aliran Turun Sisa Kelapa Sawit Menggunakan Penggas Berskala Sederhana, MUHAMMAD AFIF BIN CHE MD JUSOH, Sarjana
PENGARUH JARAK PENGIONAN, MAGNITUD DAN BENTUK MAGNET TERHADAP, AHMAD FAZLI BIN MOHAMAD NOR, Sarjana
Analisis Berangka Taburan Saiz Partikel Jelaga Di Dalam Enjin Diesel Suntikan Terus, MUHAMMAD AHMAR BIN ZUBER, Sarjana
TEKNOLOGI PEROLEHAN TENAGA DARIPADA SISA BAHAN MAKANAN, AHMAD FAIZAL BIN AHMAD ZAMLI, Sarjana
PENGAWALAN DANDANG MENGGUNAKAN KAWALAN BERKADARAN-KAMIRAN-TERBITAN UNTUK PENGHAPUSAN ASAP HITAM DARIPADA KILANG KELAPA SAWIT, NOOR ATIKAH BINTI ABDULLAH, Sarjana
KAJIAN BERANGKA PROSES PEMBAKARAN BAHAN API HIDROGEN ENJIN PENCUCUHAN MAMPATAN DALAM ATMOSFERA ARGON-OKSIGEN, NIK MUHAMMAD HAFIZ BIN NIK AB RASHID, Sarjana
KAJIAN SIMULASI CIRI-CIRI PEMBAKARAN DAN TERMAL-FIZIKAL CAMPURAN, NORHIDAYAH BINTI MAT TAIB, Sarjana
PEMBANGUNAN DAN KAJIAN PRESTASI SISTEM PENYAMANAN UDARA KITARAN SERAPAN TERBANTU SURIA, ZAKARIA BIN JUSOH, Sarjana
ANALISIS PRESTASI TRIBOLOGI PERMUKAAN BERTEKSTUR CAWAK, HANIFF BIN ABDUL RAHMAN, Sarjana
MUHAMAD FAIZ NUR MD JASIMIN, Sarjana

Pelajar Doktor Falsafah

SIMULASI PENINGKATAN PEMINDAHAN HABA BAGI PENYEJUKAN UDARA, HIND AZEEZ MOHAMMED HUSSEIN, Doktor Falsafah
Pembangunan Sistem Penyampaian MQL Untuk Mengoptimumkan Prestasi Pemesinan, YAP PIN HAN, Doktor Falsafah
LIU PENG, Doktor Falsafah
Pencirian dan Penggunaan Campuran Minyak Masak Terpakai Tak Terawat Dengan Diesel, MD ISA BIN ALI, Doktor Falsafah
KAJIAN PEMANTAUAN PEMBAKARAN ENJIN CAJ HOMOGEN NYALAAN MAMPATAN, AZALI BIN AWALUDIN, Doktor Falsafah
Transfer Enhancement Using Nanofluids in Laminar Pipe Flow, HYDER HASSAN ABD, Doktor Falsafah
ANALISIS PRESTASI ENJIN CNG-DI MENGGUREKEN CAMPURAN HOMOGEN DAN, SAAD MOHSEN SAAD AL-JAMALI, Doktor Falsafah
A Modified Turbocharger Centrifugal Compressor for Improved Performance Map, LAYTH HASAN JAWAD, Doktor Falsafah
Development Fuel Injector For Hydrogen-Natural Gas Fuel In Direct Injection Engine., JAVAD ZAREEI, Doktor Falsafah
OUM SAAD ABDUL AMIR ABUALOYOUN, Doktor Falsafah
Study of Orifice-Induced Fluid Flow and Pipe Vibration., MOHAMED ABEDALABAS SIBA, Doktor Falsafah
KAJIAN SIMULASI PEMBAKARAN HIDROGEN DALAM PERSEKITARAN PELBAGAI GAS ADI DALAM APLIKASI ENJIN CUCUHAN MAMPATAN SUNTIKAN LANGSUNG, NORHIDAYAH BINTI MAT TAIB, Doktor Falsafah
PENGOPTIMUMAN MODEL INVENTORI BERSEPADU DINAMIK HIJAU DENGAN, ACHMAD CHAIRDINO LEUVEANO, Doktor Falsafah
Pengoptimuman Penggasan Campuran Biojisim Pelepah Kelapa Sawit Untuk Penghasilan Bahan Api Keterbaharuan, MUHAMMAD FAIZ BIN ABDUL HAMID, Doktor Falsafah
KAJIAN EVOLUSI DAN TABURAN SAIZ PARTIKEL JELAGA DI DALAM SILINDER, FADZLI BIN IBRAHIM, Doktor Falsafah
YOSSEF HUSSIN ABDUSALAM BOLOMI, Doktor Falsafah
APLIKASI PERESAP BERBILAH PEMAMPAT PENGECAS TURBO PADA ENJIN CNGDI UNTUK TEKNOLOGI KENDERAAN HIJAU, HILMI BIN AMIRUDDIN, Doktor Falsafah
ASHRAF AMER ABBAS, Doktor Falsafah
MUHAMMAD ASYRAF BIN MOHD AZMI, Doktor Falsafah
NURUL NADIA NOR HAMRAN, Doktor Falsafah
ZULKHAIRI ZAINOL ABIDIN, Doktor Falsafah
KHIDMAT SOSIAL / SOCIAL @ PUBLIC ENGAGEMENT
(Sumbangan),(Tempoh),(Peringkat)

Khidmat Luar

Self-regulated Learning in UKM , 30-04-2015 sehingga 09-05-2015 , Antarabangsa
Injector Position Analysis of Hydrogen Direct Engine Conditions , 15-04-2015 sehingga 16-04-2015 , Antarabangsa
Time and Motion Studies of Manual Harvesting Methods for Oil Palm Fruit Bunches: A Malaysian Case Study , 05-04-2015 sehingga 10-04-2015 , Antarabangsa
Supercritical water gasification of petrochemical wastewater , 31-12-2014 sehingga 28-01-2015 , Antarabangsa
Thermodynamic Limit of Combustion Engines , 14-12-2015 sehingga 03-01-2016 , Antarabangsa
Influence of back pressure and injected-gas properties on jet characteristics of a multi-hole high pressure gaseous injector , 29-11-2016 sehingga 20-12-2016 , Antarabangsa
Jurnal Kejuruteraan , 03-10-2017 sehingga 03-11-2017 , Kebangsaan
Environmental Progress and Sustainable Energy , 10-07-2017 sehingga 31-07-2017 , Antarabangsa
Applied Thermal Engineering , 10-07-2017 sehingga 31-07-2017 , Antarabangsa
Applied Thermal Engineering (Revision 1) , 06-10-2017 sehingga 26-10-2017 , Antarabangsa
Applied Thermal Engineering (Revision 2) , 27-10-2017 sehingga 27-10-2017 , Antarabangsa
Khidmat Nasihat untuk Pembinaan Dokumen Standard Matapelajaran Elektif Kejuruteraan Mekanikal , 21-08-2017 sehingga 24-08-2017 , Kebangsaan
Pemeriksa Kualiti Kertas Soalan Program Sarjana Kejuruteraan Mekanikal , 11-01-2017 sehingga 13-01-2017 , Kebangsaan
Applied Thermal Engineering , 12-07-2018 sehingga 02-08-2018 , Antarabangsa
University Kuala Lumpur Cawangan Malaysian France Institute - UniKL MFI , 26-12-2018 sehingga 25-12-2023 , Kebangsaan
Universiti Kuala Lumpur Cawangan Malaysian France Institute (UniKL-MFI) - Bachelor Engineering Technology Programme , 26-12-2018 sehingga 25-12-2023 , Kebangsaan
External Evaluator for Yayasan Universiti Teknologi Petronas- Fundamental Research Grant (YUTP-FRG) Project , 03-12-2018 sehingga 02-12-2023 , Kebangsaan
lnternational Advisory Committee of the 8th lnternational Conference of lnternational Bioprocessing Association , 06-08-2018 sehingga 05-05-2019 , Antarabangsa
JAWATANKUASA PEMERIKSA SISWAZAH DAN PEPERIKSAAN LISAN (SELFUEL), UKM , 14-09-2018 sehingga 14-09-2018 , Kebangsaan
TECHNICAL ADVISORY COMMITTEE (TAC) KOLEJ VOKASIONAL KAJANG , 19-03-2019 sehingga 19-03-2021 , Kebangsaan
Minyak Pelincir Berasaskan Tumbuhan , 16-04-2019 sehingga 23-04-2019 , Kebangsaan
Minyak Pelincir Berasaskan Tumbuhan , 16-04-2019 sehingga 23-04-2019 , Kebangsaan
Journal of Aerosol Science (Elsevier) , 18-07-2019 sehingga 07-08-2019 , Antarabangsa
Journal of Aerosol Science (Elsevier) , 02-09-2019 sehingga 23-09-2019 , Antarabangsa
Process optimisation of syngas production from gasification of waste plastic using a small-scale infrared reactor , 10-08-2021 sehingga 01-01-1970 , Antarabangsa
Dr. Ahmad Murad , 01-08-2022 sehingga 05-09-2022 , Antarabangsa
Panel Penasihat Teknikal dan Akademik , 01-01-2021 sehingga 31-12-2022 , Kebangsaan

Khidmat Dalam

AHLI JAWATANKUASA PENYEDIAAN DOKUMEN SELF ASSESMENT REPORT (SAR) COPPA 2017 , 15-08-2018 sehingga 31-12-2019 , Fakulti / Institut / Pusat Perkhidmatan
Geran Penyelidikan Di Bawah Dana Universiti Penyelidikan (UP) Geran GGPM, DIP & GUP Tahun 2019-Peringkat Fakulti , 09-07-2019 sehingga 09-07-2019 , Fakulti / Institut / Pusat Perkhidmatan
JAWATANKUASA PENYEDIAAN DOKUMEN SEMAKAN PROGRAM SISWAZAH 2020 , 03-03-2020 sehingga 01-01-1970 , Fakulti / Institut / Pusat Perkhidmatan
JAWATANKUASA TERAS LESSON , 01-09-2021 sehingga 31-08-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankkuasa Mechanical Engineering Multiconference 2019 , 01-04-2018 sehingga 30-04-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Juruaudit kendiri FKAB , 01-01-2022 sehingga 31-12-2023 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Majlis Minggu Mesra Mahasiswa Sesi Akademik 2020/2021 , 17-09-2020 sehingga 06-10-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil 6/2017 (P) , 15-02-2017 sehingga 15-02-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil. 12/2016 (M) , 20-04-2016 sehingga 20-04-2016 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pemeriksa Siswazah Bil. 30/2016 (M) , 29-09-2016 sehingga 29-09-2016 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Pengambilan Pelajar Program Doktor Falsafah Melalui Saluran Laluan Pantas (Fast Track) Bil. 4/2020 , 28-10-2020 sehingga 28-10-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Penilaian Geran KPM TRGS/ LRGS/ FRGS/ Tahun 2020 - Peringkat Fakulti , 04-02-2020 sehingga 04-02-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 04/2021 (M.JKMP) , 22-04-2021 sehingga 22-04-2021 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 10/2018 (M.CESPRO) , 29-03-2018 sehingga 29-03-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 10/2022 (P.JKMP) , 07-04-2022 sehingga 07-04-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 12/2017 (M) , 14-07-2017 sehingga 14-07-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 12/2018 (M.Sutra) , 09-08-2018 sehingga 09-08-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 14/2019 (M.CESPRO) , 21-06-2019 sehingga 21-06-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 2/2020 (P.KMP) , 20-01-2020 sehingga 20-01-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 22/2020 (P.JKA) , 04-08-2020 sehingga 04-08-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 23/2017 (M) , 04-10-2017 sehingga 04-10-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 23/2019 (M.CESPRO) , 15-10-2019 sehingga 15-10-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 26/2018 (M.Paket) , 25-10-2018 sehingga 25-10-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 3/2018 (M.PAKET) , 20-02-2018 sehingga 20-02-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 3/2020 (M.KA) , 27-02-2020 sehingga 27-02-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 3/2020 (P.KMP) , 30-01-2020 sehingga 30-01-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 40/2019 (P.KMP) , 19-12-2019 sehingga 19-12-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 62/2017 (P) , 08-08-2017 sehingga 08-08-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 7/2018 (P.Prisma) , 08-03-2018 sehingga 08-03-2018 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 7/2020 (M.KA) , 02-11-2020 sehingga 02-11-2020 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 9/2017 (M) , 12-04-2017 sehingga 12-04-2017 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Peperiksaan Lisan Bil. 9/2019 (P.Sutra) , 06-03-2019 sehingga 06-03-2019 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Program Mobility HDU , 25-10-2021 sehingga 21-01-2022 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Promosi dan Media Jabatan Kejuruteraan Mekanaikal dan Pembuatan (JKMP) , 05-08-2020 sehingga 04-08-2021 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Jawatankuasa SAR dan Akreditasi 2022 , 01-03-2021 sehingga 28-02-2023 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Jawatankuasa Seminar Pendidikan Kejuruteraan dan Alam Bina (PEKA2014) , 01-09-2014 sehingga 31-08-2015 , Fakulti / Institut / Pusat Perkhidmatan
Jawatankuasa Unit Penambahbaikan Pengajaran dan Pembelajaran (UP3) JKMP , 01-03-2021 sehingga 28-02-2023 , Fakulti / Institut / Pusat Perkhidmatan
KESUTRA , 01-01-2015 sehingga 31-12-2020 , Fakulti / Institut / Pusat Perkhidmatan
PANEL PENILAI DANA INOVASI FASA 3/2020 BIL 2 , 16-12-2020 sehingga 16-12-2020 , Fakulti / Institut / Pusat Perkhidmatan
PANEL PENILAI JK PATEN 2021 , 28-05-2021 sehingga 28-05-2021 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
PANEL PENILAI JK PATEN 2021 , 11-08-2021 sehingga 11-08-2021 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit
Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2022 , 01-06-2022 sehingga 31-12-2022 , Universiti
Penilai Geran Penyelidikan di bawah Dana RU Tahun 2021 , 01-05-2021 sehingga 31-12-2021 , Universiti