Untuk Kegunaan UKM sahaja
For UKM use only
Abu Bakar Sulong is Professor at the Dept. of Mechanical and Manufacturing Engineering, UKM. He graduated with a BEng (Hons) in Mechanical and System Engineering from Gifu University Japan, 2001. He then worked as an trainee engineer in SMK Corporation in Ibaraki, Japan for a year followed by as a design engineer in Malaysia for two years. He joined UKM as a tutor in January, 2004. He then continued his studies in March, 2004. In 2008, he received his PhD from Sejong University, South Korea under Advanced Material Processing Lab, Mechanical and Aerospace Engineering Department. He teaches for undergraduate and post graduate of Mechanical Engineering Programme. He served as Editor-in-Chief for Jurnal Kejuruteraan (Journal of Engineering) an indexed ESCI (WoS). Currently, he is deputy director at Center of Research and Instrumentation Management (CRIM). His specializations are in the area of Composite Material Processing and Powder Metallurgy. Currently, he is an active researcher for four research groups in UKM. He has experienced as project and programme leader for grants worth more than RM4.0 million. Based on Scopus data on June 2020, he has 230 published documents, 2626 citations, 30 h-index with nearly 100 manuscripts in Q1 and Q2 journals. He been invited as keynotes, invited talks and speakers at various international and national conferences. He is also a Professional Engineer with Practice under Board Engineer Malaysia (BEM). He also serves as engineering programmes accessor, panel for grants evaluation and committee of professional organizations.
| Kejuruteraan Mekanikal , Doktor Falsafah , SEJONG UNIVERSITY , 2008 |
| Sarjana Muda , GIFU UNIV., JAPAN , 2001 |
| TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (Composite Material Processing, Powder Metallurgy) |
| Kambiz Rashidi, Abu Bakar Sulong, Norhamidi Muhamad, Abdolali Fayyaz, Farhana Mohd Foudzi, Al Basir. (2024). Martensitic Transformation Characteristics, Mechanical Properties And Damping Behavior Of Cualni Shape Memory Alloys: A Review Of Their Modifications And Improvements. - Journal Of Materials Research And Technology. 2732-2749. |
| Nabilah Afiqah Mohd Radzuan, Farhana Mohd Foudzi, Abu Bakar Sulong, M. S. H. Al-furjan, Nishata Royan Rajendran Royan. (2024). Quick Insight Into The Dynamic Dimensions Of 4d Printing In Polymeric Composite Mechanics. - Reviews On Advanced Materials Science. 1-12. |
| Al Basir, Norhamidi Muhamad, Abu Bakar Sulong, Nashrah Hani Jamadon, Farhana Mohd Foudzi. (2023). Recent Advances In Processing Of Titanium And Titanium Alloys Through Metal Injection Molding For Biomedical Applications: 2013-2022. - Materials. 1-33. |
| Fathin Iliana Jamhari. Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Nashrah Hani Jamadon, Kim Seah Tan. (2023). Influence Of Heat Treatment Parameters On Microstructure And Mechanical Performance Of Titanium Alloy In Lpbf: A Brief Review. - Journal Of Materials Research & Technology. 4091-4110. |
| Nabilah Afiqah Mohd Radzuan, Nisa Naima Khalid, Farhana Mohd Foudzi, Nishata Royan Rajendran Royan And Abu Bakar Sulong. (2023). Mechanical Analysis Of 3d Printed Polyamide Composites Under Different Filler Loadings. - Polymers. 1-11. |
| Mohd Rhafiq Mazlan, Nashrah Hani Jamadon, Armin Rajabi, Abu Bakar Sulong, Intan Fadhlina Mohamed, Farazila Yusof, Nur Ayuni Jamal. (2023). Necking Mechanism Under Various Sintering Process Parameters - A Review. - Journal Of Materials Research And Technology - Jmr&t. 2189-2201. |
| Mohd Nur Ikhmal Salehmin, Muhammad Farhan Hil Me, Wan Ramli Wan Daud, Nazlina Haiza Mohd Yasin, Mimi Hani Abu Bakar, Abu Bakar Sulong, Swee Su Lim. (2023). Construction Of Microbial Electrodialysis Cells Equipped With Internal Proton Migration Pathways: Enhancement Of Wastewater Treatment, Desalination, And Hydrogen Production. - Science Of The Total Environment. 1-13. |
| Al Basir, Norhamidi Muhamad, Abu Bakar Sulong, Muhammad Bin Mohamed Amin, Nashrah Hani Jamadon, Nabilah Afiqah Mohd Radzuan. (2023). Micro-injection Molding And Debinding Behavior Of Hydroxyapatite/zirconia Bi-materials Fabricated By Two-component Micro Powder Injection Molding Process. - Materials. 1-18. |
| J Mogan, W. S. W. Harun, K. Kadirgama, D. Ramasamy, F. M. Foudzi, A. B. Sulong, F. Tarlochan And F. Ahmad. (2023). Fused Deposition Modelling Of Polymer Composite: A Progress. - Polymers. 1-28. |
| Qian Wen Yeang, Abu Bakar Sulong, Soon Huat Tan. (2022). Electrospun Carboxyl-functionalised Multi-walled Carbon Nanotube/poly(vinyl Alcohol) Asymmetric Pervaporation Membrane: Application And Modeling. - Journal Of Applied Polymer Science. 1-19. |
| Mohd Nur Ikhmal Salehmin, Teuku Husaini, Jonathan Goh, Abu Bakar Sulong. (2022). High-pressure Pem Water Electrolyser: A Review On Challenges And Mitigation Strategies Towards Green And Low-cost Hydrogen Production. - Energy Conversion And Management. 1-28. |
| Hendra Suherman, Radwan Dweiri, Abu Bakar Sulong, Mohd Yusuf Zakaria, Yovial Mahyoedin. (2022). Improvement Of The Electrical-mechanical Performance Of Epoxy/graphite Composites Based On The Effects Of Particle Size And Curing Conditions. - Polymers. 1-14. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, David Hui. (2022). Adhesion Behaviour Of 3d Printed Polyamide Carbon Fibre Composite Filament. - Reviews On Advanced Materials Science. 838-848. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad. (2022). Sintering Behavior Of Bi-material Micro-component Of 17-4ph Stainless Steel And Ysintering Behavior Of Bi-material Micro-component Of 17-4ph Stainless Steel And Yttria-stabilized Zirconia Produced By. - Materials. 1-13. |
| Hedaiat Moradpoor, Hossein Mohammadi, Mohsen Safaei, Hamid Reza Mozaffari, Roohollah Sharifi, Pourya Gorji, Abu Bakar Sulong, Norhamidi Muhamad, Mona Ebadi. (2022). Recent Advances On Bacterial Cellulose-based Wound Management: Promises And Challenges. - International Journal Of Polymer Science. 1-24. |
| Hossein Mohammadi, Mohammad Majid Sepantafar, Norhamidi Muhamad, Abu Bakar Sulong. (2021). How Does Scaffold Porosity Conduct Bone Tissue Regeneration?. - Advanced Engineering Materials. 1-19. |
| Lohashenpahan Shanmuganantha , Azmi Baharudin , Abu Bakar Sulong , Roslinda Shamsudin And Min Hwei Ng. (2021). Prospect Of Metal Ceramic (titanium-wollastonite) Composite As Permanent Bone Implants: A Narrative Review. - Materials. 1-24. |
| M.ahsanul Haque. Abu Bakar Sulong, L.kee Shyuan, E.herianto Majlan, T. Husaini, R.emilia Rosli. (2021). Synthesis Of Polymer/mwcnt Nanocomposite Catalyst Supporting Materials For High-temperature Pem Fuel Cells. - International Journal Of Hydrogen Energy. 4339-4353. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad, Ukwueze Bonaventure Emeka. (2021). Process Parameters Used In Macro/micro Powder Injection Molding: An Overview. - Metals And Materials International. 2023-2045. |
| Nurul Nadiah Mahmud, Abu Bakar Sulong, Bhupendra Sharma And Kei Ameyama. (2021). Presintered Titanium-hydroxyapatite Composite Fabricated Via Pim Route. - Metals. 1-10. |
| Nurul Nadiah Mahmud, Farah Atiqah Abdul Azam, Mohd Ikram Ramli, Farhana Mohd Foudzi, Kei Ameyama, Abu Bakar Sulong. (2021). Rheological Properties Of Irregular-shaped Titanium-hydroxyapatite Bimodal Powder Composite Moulded By Powder Injection Moulding. - Journal Of Materials Research And Technology. 2255-2264. |
| Mohd Yusuf Zakaria, Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Hussain Ismail. (2021). Application Of Sodium Chloride As Space Holder For Powder Injection Molding Of Alloy Titanium - Hydroxyapatite Composites. - Journal Of Materials Research And Technology. 478-486. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Anil Verma, And Norhamidi Muhamad. (2021). Layup Sequence And Interfacial Bonding Of Additively Manufactured Polymeric Composite: A Brief Review. - Nanotechnology Reviews. 1-20. |
| Shabbah Begum, Nor Yuliana Yuhana, Noorashikin Md Saleh, Nur Hidayatul Nazirah Kamarudin, Abu Bakar Sulong. (2021). Review Of Chitosan Composite As A Heavy Metal Adsorbent: Material Preparation And Properties. - Carbohydrate Polymers. 1-9. |
| Hossein Mohammadi, Norhamidi Muhamad, Abu Bakar Sulong, Mohsen Ahmadipour. (2021). Recent Advances On Biofunctionalization Of Metallic Substrate Using Ceramic Coating: How Far Are We From Clinically Stable Implant?. - Journal Of The Taiwan Institute Of Chemical Engineers. 254-270. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad. (2021). Feedstock Properties And Debinding Mechanism Of Yttria-stabilized Zirconia/ Stainless Steel 17-4ph Micro-components Fabricated Via Two-component Micro-powder Injection Molding Process. - Ceramics International. 20476-20485. |
| Nur Farhani Ismail, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2021). The Effect Of Alkali Treatment On Physical, Mechanical And Thermal Properties Of Kenaf Fiber And Polymer Epoxy Composites. - Polymers. 1-17. |
| Farah Atiqah Abdul Azam, Nishata Royan Rajendran Royan, Nor Yuliana Yuhana, Nabilah Afiqah Mohd Radzuan, Sahrim Ahmad And Abu Bakar Sulong. (2020). Fabrication Of Porous Recycled Hdpe Biocomposites Foam: Effect Of Rice Husk Filler Contents And Surface Treatments On The Mechanical Properties. - Polymers. 1-14. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron. (2020). New Processing Technique For Biodegradable Kenaf Composites: A Simple Alternative To Commercial Automotive Parts. - Composites Part B: Engineering. 1-7. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad. (2020). Bi-material Micro-part Of Stainless Steel And Zirconia By Two-component Micro-powder Injection Molding: Rheological Properties And Solvent Debinding Behavior. - Metals. 1-17. |
| Youping Gong, Fei Wang, M. S. H. Al Furjan, Lijun Shan, Jingyang He, Xiangjuan Bian,zhikai Bi, Haiqiang Liu, Wenxin Li, Huifeng Shao, Guojin Chen And Abu Bakar Sulong 4. (2020). Experimental Investigation And Optimal 3d Bioprinting Parameters Of Sa Gel Porous Cartilage Scaffold. - Applied Sciences. 1-22. |
| H. Hanizam, M.s. Salleh, M.z. Omar, A.b. Sulong, M.a.m. Arif. (2020). Effects Of Hybrid Processing On Microstructural And Mechanical Properties Of Thixoformed Aluminum Matrix Composite. - Journal Of Alloys And Compounds. 1-12. |
| Majid Niaz Akhtar, Sumbal Javed, Mukhtar Ahmad, Abu Bakar Sulong, Muhammad Azhar Khand. (2020). Sol Gel Derived Mnti Doped Co2 W-type Hexagonal Ferrites: Structural, Physical, Spectral And Magnetic Evaluations. - Ceramics International. 7842-7849. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2020). Effects Of High-temperature Exposure On The Mechanical Properties Of Kenaf Composites. - Polymers. 1-13. |
| Farah 'atiqah Abdul Azam, Zakaria Razak, Mohd Khairul Fadzly Md Radzi, Norhamidi Muhammad, Che Hassan Che Haron, And Abu Bakar Sulong. (2020). Influence Of Multiwalled Carbon Nanotubes On The Rheological Behavior And Physical Properties Of Kenaf Fiber Reinforced Polypropylene Composites. - Polymers. 1-13. |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Ikram Ramli. (2019). Rheological Properties Of Titanium-hydroxyapatite With Powder Space Holder Composite Feedstock For Powder Injection Moulding. - International Journal Of Advanced Manufacturing Technology. 2591-2599. |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Rafi Raza, Mohd Ikram Ramli. (2019). Incorporation Of Wollastonite Bioactive Ceramic With Titanium For Medical Applications: An Overview. - Materials Science & Engineering C. . |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria. (2019). Effect Of Sintering On The Microstructure And Mechanical Properties Of Alloy Titaniumwollastonite Composite Fabricated By Powder Injection Moulding Process. - Ceramics International. 11648-11653. |
| Lijun Shan, Abdul Amir H. Kadhum, M.s.h. Al-furjan, Wenjian Weng, Youping Gong, Kui Cheng, Maoying Zhou, Lingqing Dong, Guojin Chen, Mohd S. Takriff, Abu Bakar Sulong. (2019). In Situ Controlled Surface Microstructure Of 3d Printed Ti Alloy To Promote Its Osteointegration. - Materials. 1-13. |
| H. Hanizam, M.s. Salleh, M.z. Omar, A.b. Sulong. (2019). Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. - Journal Of Alloys And Compounds. 83-90. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Teuku Husaini, Edy Herianto Majlan, Masli Irwan Rosli, Muhammad Firdaus Aman. (2019). Fabrication Of Multi-filler Mcf/mwcnt/sg-based Bipolar Plates. - Ceramics International. . |
| Nabilah Afiqah Mohd Radzuan , Abu Bakar Sulong, David Hui And Anil Verma. (2019). Electrical Conductivity Performance Of Predicted Modified Fibre Contact Model For Multi-filler Polymer Composite. - Polymers. 1-12. |
| Hashim Hanizam, Mohd Shukor Salleh, Mohd Zaidi Omar, Abu Bakar Sulong. (2019). Optimisation Of Mechanical Stir Casting Parameters For Fabrication Of Carbon Nanotubes-aluminium Alloy Composite Through Taguchi Method. - Journal Of Materials Research And Technology-jmr&t. 2223-2231. |
| Nabilah Afiqah Mohd Radzuan, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria Bin Razak, Izdihar Binti Tharizi, Abu Bakar Sulong, Che Hassan Che Haron, Norhamidi Muhamad. (2019). Kenaf Composites For Automotive Components: Enhancement In Machinability And Moldability. - Polymers. 1-10. |
| Rosli, R.e., Sulong, A.b., Daud, W.r.w., Zulkifley, M.a., Rosli, M.i., Majlan, E.h., Haque, M.a. & Radzuan N.a.m.. (2019). The Design And Development Of An Ht-pemfc Test Cell And Test Station. - International Journal Of Hydrogen Energy. 30763-30771. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu, Ahmad Tajuddin Abdullah, Teuku Husaini, Ros Emilia Rosli, Edy Herianto Majlan, Masli Irwan Rosli. (2019). Fibre Orientation Effect On Polypropylene/milled Carbon Fiber Composites In The Presence Of Carbon Nanotubes Or Graphene As A Secondary Filler: Application On Pem Fuel Cell Bipolar Plate. - International Journal Of Hydrogen Energy. 30618-30626. |
| Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Mohd Khairul Fadzly Md Radzi, Nur Farhani Ismail, Dulina Tholibon, Izdihar Tharazi. (2019). Effects Of Thermal Cycling On Physical And Tensile Properties Of Injection Moulded Kenaf/carbon Nanotubes/polypropylene Hybrid Composites. - Composites Part B: Engineering. . |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana, Ruey Shan Chen, Mohd Hafizuddin Ab Ghani, Sahrim Ahmad. (2018). Uv/o3 Treatment As A Surface Modification Of Rice Husk Towards Preparation Of Novel Biocomposites. - Plos One. . |
| Qian Wen Yean, Abu Bakar Sulong, Soon Huat Tan. (2018). Asymmetric Membrane Containing Electrospun Cu-btc/poly(vinyl Alcohol) For Pervaporation Dehydration Of 1,4-dioxane. - Separation And Purification Technology. . |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Farhana Mohd Foudzi, Mohannad Saleh Hammadi Al-furjan. (2018). Effect Of Sintering Parameters On Physical And Mechanical Properties Of Powder Injection Moulded Stainless Steel Hydroxyapatite Composite. - Plos One. 1-17. |
| Majid Niaz Akhtar, Abu Bakar Sulong, A. Umer, Ammar Bin Yousaf, Muhammad Azhar Khan. (2018). Multi-component Mwcnt/ng/ep-based Bipolar Plates With Enhanced Mechanical And Electrical Characteristics Fabricated By Compression Moulding. - Ceramics International. . |
| Majid Niaz Akhtar, A.b. Sulong, M.n. Akhtar, Muhammad Azhar Khan. (2018). Systematic Study Of Ce3þ On The Structural And Magnetic Properties Of Cu Nanosized Ferrites For Potential Applications. - Journal Of Rare Earths. 156-164. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong , Mahendra Rao Somalu , Edy Herianto Majlan, Teuku Husaini And Masli Irwan Rosli. (2018). Effects Of Die Configuration On The Electrical Conductivity Of Polypropylene Reinforced Milled Carbon Fibers: An Application On A Bipolar Plate. - Polymers. . |
| Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong. (2018). Microstructure And Physical And Mechanical Properties Of Micro Cemented Carbide Injection. - Powder Technology. 151-158. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Farhana Mohd Foudzi , Mohannad Saleh Hammadi Al-furjan. (2018). Effect Of Sintering Parameters On Physical And Mechanical Properties Of Powder Injection Moulded Stainless Steel-hydroxyapatite Composite. - Plos One. . |
| M.f.f.a.hamidi, W.s.w.harun, M.samykano, S.a.c.ghani, Z.ghazali, F.ahmad, A.b.sulong. (2017). A Review Of Biocompatible Metal Injection Moulding Process Parameters For Biomedical Applications. - Materials Science And Engineering C. 1263-1276. |
| Tayser Sumer Gaaz , Abu Bakar Sulong , Abdul Amir H. Kadhum , Mohamed H. Nassir , Ahmed A. Al-amiery. (2017). Absolute Variation Of The Mechanical Characteristics Of Halloysite Reinforced Polyurethane Nanocomposites Complemented By Taguchi And Anova Approaches. - Results In Physics. 3287-3300. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2017). Electrical Properties Of Extruded Milled Carbon Fibre And Polypropylene. - Journal Of Composite Materials. 3187-3195. |
| Gaaz, T.s., Sulong, A.b., Kadhum, A.a.h., Nassir, M.h., Al-amiery, A.a.. (2017). Surface Improvement Of Halloysite Nanotubes. - Applied Sciences (switzerland). 291-299. |
| Gaaz, T.s., Sulong, A.b., Kadhum, A.a.h., Al-amiery, A.a., Nassir, M.h., Jaaz, A.h.. (2017). The Impact Of Halloysite On The Thermo-mechanical Properties Of Polymer Composites. - Molecules. 838-858. |
| Gaaz, Ts., Sulong, A.b., Ansari, M.n.m., Kadhum, A.a.h., Al-amiery, A.a., Nassir, M.h.. (2017). Effects Of Starch Loading On The Thermo Mechanical And Morphological Properties Of Polyurethane Composites. - Materials. 1-14. |
| Tayser Sumer Gaaz, Abdul Amir H Kadhum, Patina Kiah Anak Michael, Ahmed Al Amiery, Abu Bakar Sulong, Abu Bakar Sulong, Mohamed H Nassir, Ahmed Hameed Jaaz. (2017). Unique Halloysite Nanotubes Polyvinyl Alcohol Polyvinylpyrrolidone Composite Complemented With Physico Chemical Characterization. - Polymers. 207-222. |
| Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan, Wan Ramli Wan Daud. (2017). Coating Of Stainless Steel And Titanium Bipolar Plates For Anticorrosion In Pemfc: A Review. - International Journal Of Hydrogen Energy. 9135-9148. |
| Majid Niaz Akhtar, A. Rahman, A.b. Sulong, Muhammad Azhar Khan. (2017). Structural, Spectral, Dielectric And Magnetic Properties Of Ni0.5mgxzn0.5-xfe2o4 Nanosized Ferrites For Microwave Absorption And High Frequency Applications. - Ceramics International. 4357-4365. |
| R.e. Rosli, A.b. Sulong, W.r.w. Daud, M.a. Zulkifley, T. Husaini, M.i. Rosli, E.h. Majlan, M.a. Haque. (2017). A Review Of High-temperature Proton Exchange Membrane Fuel Cell (ht-pemfc) System. - International Journal Of Hydrogen Energy. 9293-9314. |
| Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir And Ahmed A. Al Amiery. (2017). Optimizing Physio Mechanical Properties Of Halloysite Reinforced Polyurethane Nanocomposites By Taguchi Approach. - Science Of Advanced Materials. 1-13. |
| Nabilah Afiqah Mohd Radzuan,mohd Yusuf Zakaria, Abu Bakar Sulong,jaafar Sahari. (2017). The Effect Of Milled Carbon Fibre Filler On Electrical Conductivity In Highly Conductive Polymer Composites. - Composites Part B : Engineering. 153-160. |
| M. Ahsanul Haque , A.b. Sulong, K.s. Loh, E. Herianto Majlan,t. Husaini, R. Emilia Rosli. (2017). Acid Doped Polybenzimidazoles Based Membrane Electrode Assembly For High Temperature Proton Exchange Membrane Fuel Cell: A Review. - International Journal Hydrogen Energy. 9156-9179. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Jaafar Sahari. (2017). A Review Of Electrical Conductivity Models For Conductive Polymer Composite. - International Journal Of Hydrogen Energy. 9262-9273. |
| Majid Niaz Akhtar, Abu Bakar Sulong , Mukhtar Ahmad, Muhammad Azhar Khan,akbar Ali, M.u. Islam. (2016). Impacts Of Gdece On The Structural, Morphological And Magnetic Properties Of Garnet Nanocrystalline Ferrites Synthesized Via Solegel Route. - Journal Of Alloys And Compounds. 486-495. |
| Majid Niaz Akhtar, Abu Bakar Sulong, Saniah Ab Karim, Che Husna Azhari, Mr Raza. (2016). Evaluation Of Thermal, Morphological And Mechanical Properties Of Pmma/nacl/dmf Electrospun Nanofibers: An Investigation Through Surface Methodology Approach. - Iranian Polymer Journal. 1025-1038. |
| Tayser Sumer Gaas, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir And Ahmed A. Al Amiery. (2016). Optimizing Injection Molding Parameters Of Different Halloysites Type Reinforced Thermoplastic Polyurethane Nanocomposites Via Taguchi Complemented With Anova. - Materials. 1-19. |
| Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad , Abu Bakar Sulong , M.a. Omar,majid Niaz Akhtar, Muhammad Aslam. (2016). Effects Of Solid Loading And Cooling Rate On The Mechanical Properties And Corrosion Behavior Of Powder Injection Molded 316 L Stainless Steel. - Powder Technology. 135-142. |
| Majid Niaz Akhtara, Abu Bakar Sulong, M.k. Fadzly Radzi, N.f. Ismail, M.r. Razab, Norhamidi Muhamad, Muhammad Azhar Khan. (2016). Influence Of Alkaline Treatment And Fiber Loading On The Physical And Mechanical Properties Of Kenaf/polypropylene Composites For Variety Of Applications. - Progress In Natural Science: Materials International. 657-664. |
| Majid Niaz Akhtar, Abu Bakar Sulong, Muhammad Azhar Khan, Mukhtar Ahmad, Ghulam Murtaza, M.r. Raza, R. Raza, M. Saleem, M. Kashiff. (2016). Structural And Magnetic Properties Of Yttrium Iron Garnet (yig) And Yttrium Aluminum Iron Garnet (yaig) Nanoferrites Prepared By Microemulsion Method. - Journal Of Magnetism And Magnetic Materials. 425-431. |
| Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir And Ahmed A. Al-amiery. (2016). Impact Of Sulfuric Acid Treatment Of Halloysite On Physico-chemic Property Modification. - Materials. 1-16. |
| Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif, Mohd Ikram Ramli. (2015). Powder Injection Molding Of Ha Ti6al4v Composite Using Palm Stearin As Based Binder For Implant Material. - Material And Design. 1028-1034. |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Jaafar Sahari, Hendra Suherman,. (2015). Effect Of The Addition Of Milled Carbon Fiber As A Secondary Filler On The Electrical Conductivity Of Graphite/epoxy Composites For Electrical Conductive Materials. - Composite Part B. 75-80. |
| Fayyaz A., Muhamad N., Sulong A.b., Yunn H.s., Amin S.y.m., Rajabi J.. (2015). Micro-powder Injection Molding Of Cemented Tungsten Carbide: Feedstock Preparation And Properties. - Ceramics International. 3605-3612. |
| Eshkoor R.a., Ude A.u., Sulong A.b., Zulkifli R., Ariffin A.k., Azhari C.h.. (2015). Energy Absorption And Load Carrying Capability Of Woven Natural Silk Epoxy - Triggered Composite Tubes. - Composites Part B: Engineering. 10-18. |
| S.a. Muhammed Ali, Ros Emilia Rosli, Andanastuti Muchtar, Abu Bakar Sulong, Mahendra Rao Somalu, Edy Herianto Majlan. (2015). Effect Of Sintering Temperature On Surface Morphology And Electrical Properties Of Samarium-doped Ceria Carbonate For Solid Oxide Fuel Cells. - Ceramics International. 1323-1332. |
| S.y. Heng, M.r. Raza, N. Muhamad, A.b. Sulong, A. Fayyaz. (2014). Micro Powder Injection Molding (upim) Of Tungsten Carbide. - International Journal Of Refractory Metals And Hard Materials. 45:189-195. |
| R.a. Eshkoor, A.u. Ude, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari. (2014). Failure Mechanism Of Woven Natural Silk/epoxy Rectangular Composite Tubes Under Axial Quasi-static Crushing Test Using Trigger Mechanism. - International Journal Of Impact Engineering. 53-61. |
| Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong, Javad Rajabi, Yee Ning Wong. (2014). Fabrication Of Cemented Tungsten Carbide Components Bymicro-powder Injection Moulding. - Journal Of Materials Processing Technology. 214:1436-1444. |
| Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Muhammad Rafi Raza. (2014). The Effect Of Nano-sized Stainless Steel Powder Addition On Mechanical And Physical Properties Of Micropowder Injection Molded Part. - Materials And Design. 223-232. |
| Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif, Mohd Ikram Ramli. (2014). Material Processing Of Hydroxyapatite And Titanium Alloy (ha/ti) Composite As Implant Materials Using Powder Metallurgy: A Review. - Materials And Design. 55:165-175. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong, Hafizawati Zakaria. (2013). Yttria Stabilized Zirconia Formed By Micro Ceramic Injection Molding: Rheological Properties And Debinding Effects On The Sintered Part. - Ceramics International. 39(3):2665-2674. |
| Muhammed Ali S. A., Andanastuti Muchtar, Abu Bakar Sulong, Norhamidi Muhamad, Edy Herianto Majlan. (2013). Influence Of Sintering Temperature On The Power Density Of Samarium-doped-ceria Carbonate Electrolyte Composites For Low-temperature Solid Oxide Fuel Cells. - Ceramics International. 39(5):5813-5820. |
| Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong. (2013). Effect Of Small-sized Conductive Filler On The Properties Of An Epoxy Composite For A Bipolar Plate In A Pemfc. - Ceramics International. 39(6):7159-7166. |
| R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari. (2013). Effect Of Trigger Configuration On The Crashworthiness Characteristics Of Natural Silk Epoxy Composite Tubes. - Composites Part B: Engineering. 55:5-10. |
| Hendra Suherman, Abu Bakar Sulong, Jaafar Sahari. (2013). Effect Of The Compression Molding Parameters On The In-plane And Through-plane Conductivity Of Carbon Nanotubes/graphite/epoxy Nanocomposites As Bipolar Plate Material For A Polymer Electrolyte...... - Ceramics International. 39(2):1277-1284. |
| Shye Yunn Heng, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Sri Yulis M. Amin. (2013). Effect Of Sintering Temperature On The Mechanical And Physical Properties Of Wc-10%co Through Micro-powder Injection Molding (mpim). - Ceramics International. 39:4457-4464. |
| R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari. (2013). Comparative Research On The Crashworthiness Characteristics Of Woven Natural Silk/epoxy Composite Tubes. - Materials And Design. 47:248-257. |
| Abu Bakar Sulong, Mohd Ikram Ramli, Seow Liang Hau, Jaafar Sahari, Norhamidi Muhamad, Hendra Suherman. (2013). Rheological And Mechanical Properties Of Carbon Nanotube/graphite/ss316l/polypropylene Nanocomposite For A Conductive Polymer Composite. - Composite: Part B. 50:54-61. |
| Royan, Nishata Rajendran Royan; Sulong, Abu Bakar; Sahari, Jaafar; Suherman, Hendra. (2013). Effect Of Acid- And Ultraviolet/ozonolysis-treated Mwcnts On The Electrical And Mechanical Properties Of Epoxy Nanocomposites As Bipolar Plate Applications. - Journal Of Nanomaterials. Art no.717459. |
| Qian Wen Yeang, Sharif Hussein Sharif Zein, Abu Bakar Sulong, Soon Huat Tan. (2013). Comparison Of The Pervaporation Performance Of Various Types Of Carbon Nanotube-based Nanocomposites In The Dehydration Of Acetone. - Separation And Purification Technology. 107:252-263. |
| Eghbal Hakimian, Abu Bakar Sulong. (2012). Analysis Of Warpage And Shrinkage Properties Of Injection-molded Micro Gears Polymer Composites Using Numerical Simulations Assisted By The Taguchi Method. - Materials And Design. 42:62-71. |
| Amirhossein Mansourighasri, N. Muhamad, A. B. Sulong. (2012). Processing Titanium Foams Using Tapioca Starch As A Space Holder. - Journal Of Materials Processing Technology. 212:83-89. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong, Hafizawati Zakaria. (2012). Yttria Stabilized Zirconia Formed By Micro Ceramic Injection Molding: Rheological Properties And Debinding Effects On The Sintered Part. - Ceramics International. 2665-2674. |
| Sulong, A.b, Park, J , Azhari, C.h , Jusoff, K. (2011). Process Optimization Of Melt Spinning And Mechanical Strength Enhancement Of Functionalized Multi-walled Carbon Nanotubes Reinforcing Polyethylene Fibers. - Composites Part B-engineering. 42(1):11-17. |
| Nurul Nadiah Mahmud, Abu Bakar Sulong, Kei Ameyama. (2023). Powder Injection Moulded Ti6al4v-ha Composite For Implants. - Sains Malaysiana. 1557-1565. |
| Md Ahsanul Haque, Md Mahbubur Rahman, Faridul Islam, Abu Bakar Sulong, Loh Kee Shyuan, Ros Emilia Rosli , Ashok Kumar Chakraborty, Julfikar Haider. (2023). Kinetics Of Oxygen Reduction Reaction Of Polymer-coated Mwcnt-supported Pt-based Electrocatalysts For High-temperature Pem Fuel Cell. - Energies. 1-18. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi. (2022). Prestasi Bahan Polimer Komposit Dicetak Menggunakan Pemodelan Pemendapan Bersatu: Suatu Ulasan Ringkas. - Sains Malaysiana. 1545-1556. |
| Wei Lin Ng, Lei Zhou, Abu Bakar Sulong, Eng-poh Ng & Soon Huat Tan. (2022). Modification Of The Commercial Polyester Filter Media Support With Electrospun Polyethylene Terephthalate Fibers And Its Application For Air Purification. - Science And Technology For The Built Environment. 928-943. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Iswandi. (2021). Effect Of Multi-sized Graphite Filler On The Mechanical Properties And Electrical Conductivity. - Sains Malaysiana. 2025-2034. |
| Tan Koon Tatt, Norhamidi Muhamad, Andanastuti Muchtar, Abu Bakar Sulong & Kok Yih Shia. (2021). Production Of Porous Stainless Steel Using The Space Holder Method. - Sains Malaysiana. 507-514. |
| Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan. (2020). Effects Of The Synthesis Coating Parameters For Metal Bipolar Plates. - Sains Malaysiana. 1-20. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, Mohd Yusuf Zakaria And Mohd Ikram Ramli. (2020). Study On The Influence Mechanism Of Sintering Hydroxyapatite (ha). - Journal Of Ceramic Processing Research. 662-666. |
| M. A. Haque, A. B. Sulong, E. H. Majlan, K. S. Loh, T. Husaini, R. Rosli. (2019). Physiochemical Characteristics Of Solid Electrolyte Membranes For High-temperature Pem Fuel Cell. - International Journal Of Electrochemical Science. . |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2019). Influence The Filler Orientation On The Performance Of Bipolar Plate. - Sains Malaysiana. 669-676. |
| Nurato, Edy Herianto Majlan, Wan Ramli Wan Daud, Teuku Husaini, Masli Irwan Rosli, Abu Bakar Sulong, Darwin Sebayang. (2019). Finite Element Analysis For Stress Distribution In A Proton Exchange Membrane Fuel Cell Stack. - International Journal Of Integrated Engineering. 233-240. |
| Dulina Tholibon, Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi ,nabilah Afiqah Mohd Radzuan, David Hui. (2019). Kenaf Fiber Composites: A Review On Synthetic And Biodegradable Polymer Matrix. - Jurnal Kejuruteraan. 65-76. |
| Najla Nazihah Mas'ood, Farhana Mohd Foudzi, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farrahshaida Mohd Salleh, Ukwueze Bonaventure Emeka. (2018). Two Component Materials In Powder Metallurgy: A Review Paper Focused On The Processing Technique Applied In Powder Metallurgy. - Jurnal Kejuruteraan. 23-31. |
| Nor Nabilla Kadiman, Julie Elvyana Romli, Norhamidi Muhamad, Abu Bakar Sulong & Farhana Mohd Foudzi. (2018). Pengoptimuman Parameter Sonikasi Dan Pengacauan Magnetik Bagi Mendapatkan Penyerakan Sebati Komposit Kuprum-grafin Berdasarkan Sifat Morfologi. - Sains Malaysiana. . |
| Teuku Husaini, Shuhaimi, Abu Bakar Sulong. (2018). Effect Of Temperature On The Mechanical Performance Of Highly Conductive Composites For Ht-pemfc Application. - Jurnal Kejuruteraan. . |
| Radwan Dweiri, Hendra Suherman, Abu Bakar Sulong And Jafar F. Al-sharab. (2018). Structure-property-processing Investigation Of Electrically Conductive Polypropylene Nanocomposites. - Science And Engineering Of Composite Materials. . |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria. (2018). Pengoptimuman Parameter Pengacuan Suntikan Terhadap Ketumpatan Jasad Anum Untuk Komposit Aloi Titanium-wolastonit. - Sains Malaysiana. . |
| Majid Jafarzadehghoushji, R. Alebrahim, Rozli Zulkifli, Abu Bakar Sulong, Shahrum Abdullah, Che Husna Azhari. (2018). Crashworthiness Characteristics Of Natural Ramie/bio-epoxy Composite Tubes For Energy Absorption Application. - Iranian Polymer Journal. . |
| Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Mohd Rizal Mamat,izdihar Tharazi, Dulina Tholibon, Radwan Dweiri, Mohannad Saleh Hammadi. (2018). Kenaf Reinforced Pla Composite Thermoforming: A Numerical Simulation. - International Journal Of Integrated Engineering. . |
| Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Mohd Khairol Fadzly Md Radzi, Dulina Tholibon, Izdihar Tharazi & Nur Farhani Ismail. (2018). The Effects Of Maleic Anhydride Grafted Pp (mapp) On The Mechanical Properties Of Injection Moulded Kenaf/cnts/pp Composites. - Sains Malaysiana. . |
| Salleh, F.m., Sulong, A.b., Raza, M.r., Muhamad,n., Fhang, L.t. (2017). Effect Of Space Holders On Fabrication Of Porous Titanium Alloy-hydroxyapatite Composite Through Powder Injection Molding. - Sains Malaysiana. 1651-1657. |
| Amir Arifin, Abu Bakar Sulong, Lee Choy Fun, Gunawan And Irsyadi Yani. (2017). Porous Titanium Alloy/hydroxyapatite Composite Using Powder Compaction Route. - Journal Of Mechanical Engineering And Sciences. . |
| Raza, M.r., Ahmad, F., Muhamad, N., Sulong, A.b., Omar, M.a., Akhtar, M.n., Aslam, M., Sherazi, I.. (2017). Effects Of Debinding And Sintering Atmosphere On Properties And Corrosion Resistance Of Powder Injection Molded 316 L - Stainless Steel. - Sains Malaysiana. 285-293. |
| Salleh F.m., Sulong A.b., Raza M.r., Muhamad N., Fhang L.t.. (2017). Effects Of Space Holder On Fabrication Of Porous Titanium Alloy-hydroxyapatite Composite Through Powder Injection Molding. - Sains Malaysiana. . |
| Ghoushji, M.j., Eshkoor, R.a., Zulkifli, R., Sulong, A.b., Abdullah, S., Azhari, C.h.. (2017). Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes. - Journal Of Reinforced Plastics And Composites. 1028-1037. |
| Ukwueze Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri & Farrahshaida Salleh. (2017). Two Component Injection Moulding Of Bimaterial Of Stainless Steel And Yttria Stabilized Zirconia Green Part. - Jurnal Kejuruteraan. 49-55. |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana, Mohd Hafizuddin Ab Ghani, Sahrim Ahmad. (2017). Pengoptimumam Pemprosesan Komposit Rhdpe Berpenguat Sekam Padi Dengan Kaedah Tindak Balas Permukaan (rsm). - Sains Malaysiana. 1749-1756. |
| Majid J Ghoushji, Rahim A Eshkoor, Rozli Zulkifli, Abu B Sulong, Shahrum Abdullah And Che H Azhari. (2017). Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes. - Journal Of Reinforced Plastics And Composites. . |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana,mohd Hafizuddin Ab Ghani,sahrim Ahmad. (2017). Pengoptimumam Pemprosesan Komposit Rhdpe Berpenguat Sekam Padi Dengan Kaedah Tindak Balas Permukaan (rsm). - Sains Malaysiana. . |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2016). Pengoptimuman Proses Penyemperitan Gentian Karbon Terkisar Dan Polipropilena Bagi Komposit Polimer Pengalir. - Sains Malaysiana. 1913-1921. |
| Gaaz, T.s., Sulong, A.b., Ansari,m.n.m., H Kadhum, A.a., Al-amiery, A.a., Al-furjan, M.s.h.. (2016). Effect Of Halloysite Nanotubes Loading On Thermo-mechanical And Morphological Properties Of Polyurethane Nanocomposites. - Materials Technology. 430-442. |
| Baharuddin N.a., Muchtar A., Somalu M.r., Sulong A.b., Abdullah H.. (2016). Effects Of Sintering Temperature On The Electrochemical Performance Of Solid Oxide Fuel Cell (sofc) Composite Cathode Lscf-sdcc. - Sains Malaysiana. 459-465. |
| Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum. (2016). Effect Of Hnts Addition In The Injection Moulded Thermoplastic Polyurethane Matrix On The Mechanical And Thermal Properties. - Sains Malaysiana. 1235-1242. |
| Nurul Akidah Baharuddin, Andanastuti Muchtar, Mahendra Rao Somalu, Abu Bakar Sulong, Huda Abdullah. (2016). Pengaruh Suhu Sinter Terhadap Prestasi Elektrokimia Katod Komposit Sel Bahan Api Oksida Pepejal (sofc) Lscf-sdcc. - Sains Malaysiana. 459-465. |
| Rajabi J., Zakaria H., Muhamad N., Sulong A.b., Fayyaz A.. (2015). Fabrication Of Miniature Parts Using Nano-sized Powders And An Environmentally Friendly Binder Through Micro Powder Injection Molding. - Microsystem Technologies. 1131-1136. |
| Tayser Sumer Gaaz, Abu Bakar Sulong , Majid Niaz Akhtar , Abdul Amir H. Kadhum, Abu Bakar Mohamad And Ahmed A. Al Amiery. (2015). Properties And Applications Of Polyvinyl Alcohol, Halloysite Nanotubes And Their Nanocomposites. - Molecules. 22833-22847. |
| J. Rajabi, A. B. Sulong, N. Muhamad, M. R. Raza. (2015). Powder Compaction Of Bi-materials:stainless Steel 316l And Nanocrystaline Yttria Stabilized Zirconia. - Materials Technology. 313-320. |
| Wong Yee Ning, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Muhammad Rafi Raza. (2015). Effects Of Vanadium Carbide On Sintered Wc-10%co Produced By Micro-powder Injection Molding. - Sains Malaysiana. 1175-1181. |
| Baharuddin N.a., Rahman H.a., Muchtar A., Sulong A.b., Abdullah H.. (2014). Effects Of Deposition Time And Counter-electrode Size On The Fabrication Of Lscf-sdc Carbonate Composite Cathode For Sofc. - Sains Malaysiana. 595 - 601. |
| M. I. Ramli, A. B. Sulong, N. Muhamad, A. Muchtar And A. Arifin. (2014). Stainless Steel 316l Hydroxyapatite Composite Via Powder Injection Moulding: Rheological And Mechanical Properties Characterisation. - Material Research Innovation. 100-104. |
| Nurul Akidah Baharuddin, Hamimah Ab Rahman, Andanastuti Muchtar, Abu Bakar Sulong & Huda Abdullah. (2014). Kesan Masa Pengendapan Dan Saiz Elektrod Pembalik Dalam Penghasilan Katod Komposit Lscf-sdc Karbonat Sel Fuel Oksida Pepejal. - Sains Malaysiana. 43(4): 595-601. |
| Muhammad Ilman Hakimi Chua, Abu Bakar Sulong, Mohd Fazuri Abdullah & Norhamidi Muhamad. (2013). Optimization Of Injection Molding And Solvent Debinding Parameters Of Stainless Steel Powder (ss316l) Based Feedstock For Metal Injection Molding. - Sains Malaysiana. 42(12):1743-1750. |
| Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong. (2012). Effect Of Nano-sized Powders On Powder Injection Molding: A Review. - Microsystem Technologies. 18(12):1941-1961. |
| Mohd H.i. Ibrahim, Norhamidi Muhamad, Abu B. Sulong, Khairur R. Jamaludin, Nor H.m. Nor And Sufizar Ahmad. (2011). Optimization Of Micro Metal Injection Molding With Multiple Performance Characteristics Using Grey Relational Grade. - Chiang Mai Journal Of Science. 38(2):231-241. |
| Kambiz Rashidi, Abu Bakar Sulong, Norhamidi Muhamad, Abdolali Fayyaz, Farhana Mohd Foudzi, Al Basir. (2024). Martensitic Transformation Characteristics, Mechanical Properties And Damping Behavior Of Cualni Shape Memory Alloys: A Review Of Their Modifications And Improvements. - Journal Of Materials Research And Technology. 2732-2749. |
| Nabilah Afiqah Mohd Radzuan, Farhana Mohd Foudzi, Abu Bakar Sulong, M. S. H. Al-furjan, Nishata Royan Rajendran Royan. (2024). Quick Insight Into The Dynamic Dimensions Of 4d Printing In Polymeric Composite Mechanics. - Reviews On Advanced Materials Science. 1-12. |
| Mohd Rhafiq Mazlan, Nashrah Hani Jamadon, Armin Rajabi, Abu Bakar Sulong, Intan Fadhlina Mohamed, Farazila Yusof, Nur Ayuni Jamal. (2023). Necking Mechanism Under Various Sintering Process Parameters - A Review. - Journal Of Materials Research And Technology - Jmr&t. 2189-2201. |
| Md Ahsanul Haque, Md Mahbubur Rahman, Faridul Islam, Abu Bakar Sulong, Loh Kee Shyuan, Ros Emilia Rosli , Ashok Kumar Chakraborty, Julfikar Haider. (2023). Kinetics Of Oxygen Reduction Reaction Of Polymer-coated Mwcnt-supported Pt-based Electrocatalysts For High-temperature Pem Fuel Cell. - Energies. 1-18. |
| Al Basir, Norhamidi Muhamad, Abu Bakar Sulong, Muhammad Bin Mohamed Amin, Nashrah Hani Jamadon, Nabilah Afiqah Mohd Radzuan. (2023). Micro-injection Molding And Debinding Behavior Of Hydroxyapatite/zirconia Bi-materials Fabricated By Two-component Micro Powder Injection Molding Process. - Materials. 1-18. |
| J Mogan, W. S. W. Harun, K. Kadirgama, D. Ramasamy, F. M. Foudzi, A. B. Sulong, F. Tarlochan And F. Ahmad. (2023). Fused Deposition Modelling Of Polymer Composite: A Progress. - Polymers. 1-28. |
| Minhalina Ahmad Buhairi, Farhana Mohd Foudzi, Fathin Iliana Jamhari, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Abdul Hadi Azman, Wan Sharuzi Wan Harun, Msh Al-furjan. (2023). Review On Volumetric Energy Density: Influence On Morphology And Mechanical Properties Of Ti6al4v Manufactured Via Laser Powder Bed Fusion. - Progress In Additive Manufacturing. 265-283. |
| Nurul Nadiah Mahmud, Abu Bakar Sulong, Kei Ameyama. (2023). Powder Injection Moulded Ti6al4v-ha Composite For Implants. - Sains Malaysiana. 1557-1565. |
| H. Hanizam, M. S. Salleh, Z. Marjom, M. Z. Omar, A. B. Sulong, S. A. Sundi, H. Boejang, A. H. Abdul Rasib. (2023). Effect Of Heat Treatment Cycles On Tensile Performance And Microstructural Evolution Of Thixoformed Mwcnt-a356 Composite. - Journal Of Engineering Science And Technology. 1323-1338. |
| Mohd Nur Ikhmal Salehmin, Muhammad Farhan Hil Me, Wan Ramli Wan Daud, Nazlina Haiza Mohd Yasin, Mimi Hani Abu Bakar, Abu Bakar Sulong, Swee Su Lim. (2023). Construction Of Microbial Electrodialysis Cells Equipped With Internal Proton Migration Pathways: Enhancement Of Wastewater Treatment, Desalination, And Hydrogen Production. - Science Of The Total Environment. 1-13. |
| Fathin Iliana Jamhari. Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Nashrah Hani Jamadon, Kim Seah Tan. (2023). Influence Of Heat Treatment Parameters On Microstructure And Mechanical Performance Of Titanium Alloy In Lpbf: A Brief Review. - Journal Of Materials Research & Technology. 4091-4110. |
| Al Basir, Norhamidi Muhamad, Abu Bakar Sulong, Nashrah Hani Jamadon, Farhana Mohd Foudzi. (2023). Recent Advances In Processing Of Titanium And Titanium Alloys Through Metal Injection Molding For Biomedical Applications: 2013-2022. - Materials. 1-33. |
| Nabilah Afiqah Mohd Radzuan, Nisa Naima Khalid, Farhana Mohd Foudzi, Nishata Royan Rajendran Royan And Abu Bakar Sulong. (2023). Mechanical Analysis Of 3d Printed Polyamide Composites Under Different Filler Loadings. - Polymers. 1-11. |
| Fathin Iliana Jamhari, Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Norhamidi Muhamad, Intan Fadhlina Mohamed, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan. (2023). Impact Of Hot Isostatic Pressing On Surface Quality, Porosity And Performance Of Ti6al4v Manufactured By Laser Powder Bed Fusion: A Brief Review. - Jurnal Tribologi. 1-15. |
| Wei Lin Ng, Lei Zhou, Abu Bakar Sulong, Eng-poh Ng & Soon Huat Tan. (2022). Modification Of The Commercial Polyester Filter Media Support With Electrospun Polyethylene Terephthalate Fibers And Its Application For Air Purification. - Science And Technology For The Built Environment. 928-943. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, David Hui. (2022). Adhesion Behaviour Of 3d Printed Polyamide Carbon Fibre Composite Filament. - Reviews On Advanced Materials Science. 838-848. |
| Mohd Nur Ikhmal Salehmin, Teuku Husaini, Jonathan Goh, Abu Bakar Sulong. (2022). High-pressure Pem Water Electrolyser: A Review On Challenges And Mitigation Strategies Towards Green And Low-cost Hydrogen Production. - Energy Conversion And Management. 1-28. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi. (2022). Prestasi Bahan Polimer Komposit Dicetak Menggunakan Pemodelan Pemendapan Bersatu: Suatu Ulasan Ringkas. - Sains Malaysiana. 1545-1556. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad. (2022). Sintering Behavior Of Bi-material Micro-component Of 17-4ph Stainless Steel And Ysintering Behavior Of Bi-material Micro-component Of 17-4ph Stainless Steel And Yttria-stabilized Zirconia Produced By. - Materials. 1-13. |
| Hedaiat Moradpoor, Hossein Mohammadi, Mohsen Safaei, Hamid Reza Mozaffari, Roohollah Sharifi, Pourya Gorji, Abu Bakar Sulong, Norhamidi Muhamad, Mona Ebadi. (2022). Recent Advances On Bacterial Cellulose-based Wound Management: Promises And Challenges. - International Journal Of Polymer Science. 1-24. |
| Qian Wen Yeang, Abu Bakar Sulong, Soon Huat Tan. (2022). Electrospun Carboxyl-functionalised Multi-walled Carbon Nanotube/poly(vinyl Alcohol) Asymmetric Pervaporation Membrane: Application And Modeling. - Journal Of Applied Polymer Science. 1-19. |
| Hendra Suherman, Radwan Dweiri, Abu Bakar Sulong, Mohd Yusuf Zakaria, Yovial Mahyoedin. (2022). Improvement Of The Electrical-mechanical Performance Of Epoxy/graphite Composites Based On The Effects Of Particle Size And Curing Conditions. - Polymers. 1-14. |
| Lohashenpahan Shanmuganantha , Azmi Baharudin , Abu Bakar Sulong , Roslinda Shamsudin And Min Hwei Ng. (2021). Prospect Of Metal Ceramic (titanium-wollastonite) Composite As Permanent Bone Implants: A Narrative Review. - Materials. 1-24. |
| Shabbah Begum, Nor Yuliana Yuhana, Noorashikin Md Saleh, Nur Hidayatul Nazirah Kamarudin, Abu Bakar Sulong. (2021). Review Of Chitosan Composite As A Heavy Metal Adsorbent: Material Preparation And Properties. - Carbohydrate Polymers. 1-9. |
| Hossein Mohammadi, Norhamidi Muhamad, Abu Bakar Sulong, Mohsen Ahmadipour. (2021). Recent Advances On Biofunctionalization Of Metallic Substrate Using Ceramic Coating: How Far Are We From Clinically Stable Implant?. - Journal Of The Taiwan Institute Of Chemical Engineers. 254-270. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Iswandi. (2021). Effect Of Multi-sized Graphite Filler On The Mechanical Properties And Electrical Conductivity. - Sains Malaysiana. 2025-2034. |
| Nur Farhani Ismail, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2021). The Effect Of Alkali Treatment On Physical, Mechanical And Thermal Properties Of Kenaf Fiber And Polymer Epoxy Composites. - Polymers. 1-17. |
| Hossein Mohammadi, Mohammad Majid Sepantafar, Norhamidi Muhamad, Abu Bakar Sulong. (2021). How Does Scaffold Porosity Conduct Bone Tissue Regeneration?. - Advanced Engineering Materials. 1-19. |
| M.ahsanul Haque. Abu Bakar Sulong, L.kee Shyuan, E.herianto Majlan, T. Husaini, R.emilia Rosli. (2021). Synthesis Of Polymer/mwcnt Nanocomposite Catalyst Supporting Materials For High-temperature Pem Fuel Cells. - International Journal Of Hydrogen Energy. 4339-4353. |
| Nurul Nadiah Mahmud, Abu Bakar Sulong, Bhupendra Sharma And Kei Ameyama. (2021). Presintered Titanium-hydroxyapatite Composite Fabricated Via Pim Route. - Metals. 1-10. |
| Nurul Nadiah Mahmud, Farah Atiqah Abdul Azam, Mohd Ikram Ramli, Farhana Mohd Foudzi, Kei Ameyama, Abu Bakar Sulong. (2021). Rheological Properties Of Irregular-shaped Titanium-hydroxyapatite Bimodal Powder Composite Moulded By Powder Injection Moulding. - Journal Of Materials Research And Technology. 2255-2264. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad. (2021). Feedstock Properties And Debinding Mechanism Of Yttria-stabilized Zirconia/ Stainless Steel 17-4ph Micro-components Fabricated Via Two-component Micro-powder Injection Molding Process. - Ceramics International. 20476-20485. |
| Tan Koon Tatt, Norhamidi Muhamad, Andanastuti Muchtar, Abu Bakar Sulong & Kok Yih Shia. (2021). Production Of Porous Stainless Steel Using The Space Holder Method. - Sains Malaysiana. 507-514. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad, Ukwueze Bonaventure Emeka. (2021). Process Parameters Used In Macro/micro Powder Injection Molding: An Overview. - Metals And Materials International. 2023-2045. |
| Mohd Yusuf Zakaria, Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Hussain Ismail. (2021). Application Of Sodium Chloride As Space Holder For Powder Injection Molding Of Alloy Titanium - Hydroxyapatite Composites. - Journal Of Materials Research And Technology. 478-486. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Anil Verma, And Norhamidi Muhamad. (2021). Layup Sequence And Interfacial Bonding Of Additively Manufactured Polymeric Composite: A Brief Review. - Nanotechnology Reviews. 1-20. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, Mohd Yusuf Zakaria And Mohd Ikram Ramli. (2020). Study On The Influence Mechanism Of Sintering Hydroxyapatite (ha). - Journal Of Ceramic Processing Research. 662-666. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2020). Effects Of High-temperature Exposure On The Mechanical Properties Of Kenaf Composites. - Polymers. 1-13. |
| H. Hanizam, M.s. Salleh, M.z. Omar, A.b. Sulong, M.a.m. Arif. (2020). Effects Of Hybrid Processing On Microstructural And Mechanical Properties Of Thixoformed Aluminum Matrix Composite. - Journal Of Alloys And Compounds. 1-12. |
| Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan. (2020). Effects Of The Synthesis Coating Parameters For Metal Bipolar Plates. - Sains Malaysiana. 1-20. |
| Majid Niaz Akhtar, Sumbal Javed, Mukhtar Ahmad, Abu Bakar Sulong, Muhammad Azhar Khand. (2020). Sol Gel Derived Mnti Doped Co2 W-type Hexagonal Ferrites: Structural, Physical, Spectral And Magnetic Evaluations. - Ceramics International. 7842-7849. |
| Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad. (2020). Bi-material Micro-part Of Stainless Steel And Zirconia By Two-component Micro-powder Injection Molding: Rheological Properties And Solvent Debinding Behavior. - Metals. 1-17. |
| Farah Atiqah Abdul Azam, Nishata Royan Rajendran Royan, Nor Yuliana Yuhana, Nabilah Afiqah Mohd Radzuan, Sahrim Ahmad And Abu Bakar Sulong. (2020). Fabrication Of Porous Recycled Hdpe Biocomposites Foam: Effect Of Rice Husk Filler Contents And Surface Treatments On The Mechanical Properties. - Polymers. 1-14. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron. (2020). New Processing Technique For Biodegradable Kenaf Composites: A Simple Alternative To Commercial Automotive Parts. - Composites Part B: Engineering. 1-7. |
| Youping Gong, Fei Wang, M. S. H. Al Furjan, Lijun Shan, Jingyang He, Xiangjuan Bian,zhikai Bi, Haiqiang Liu, Wenxin Li, Huifeng Shao, Guojin Chen And Abu Bakar Sulong 4. (2020). Experimental Investigation And Optimal 3d Bioprinting Parameters Of Sa Gel Porous Cartilage Scaffold. - Applied Sciences. 1-22. |
| Tant Koon Tatt, Norhamidi Muhamad, Che Hassan Che Haron, Abu Bakar Sulong. (2020). Parametric Optimization Of Metal Injection Moulding Process Using Taguchi Method. - The International Journal Of Integrated Engineering. 210-219. |
| Farah 'atiqah Abdul Azam, Zakaria Razak, Mohd Khairul Fadzly Md Radzi, Norhamidi Muhammad, Che Hassan Che Haron, And Abu Bakar Sulong. (2020). Influence Of Multiwalled Carbon Nanotubes On The Rheological Behavior And Physical Properties Of Kenaf Fiber Reinforced Polypropylene Composites. - Polymers. 1-13. |
| Iswandi, Abu Bakar Sulong, Teuku Husaini. (2019). Effects Of Graphite/polypropylene On The Electrical Conductivity Of Manufactured Bipolar Plate. - Malaysian Journal Of Analytical Sciences. 355-361. |
| Nurato, Edy Herianto Majlan, Wan Ramli Wan Daud, Teuku Husaini, Masli Irwan Rosli, Abu Bakar Sulong, Darwin Sebayang. (2019). Finite Element Analysis For Stress Distribution In A Proton Exchange Membrane Fuel Cell Stack. - International Journal Of Integrated Engineering. 233-240. |
| Najlaa Nazihah Masood, Abu Bakar Sulong, Norhamidi Muhamad, Farhana Mohd Foudzi, Farrahshaida Mohd Salleh. (2019). The Study Of Sintering Behavior Of Stainless Steel 17-4ph-stainless Steel 316l For Two Materials Powders Injection Molding (2c-pim) Process. - Journal Of Mechanical Engineering. 67-77. |
| Md Ahsanul Haque, Abu Bakar Sulong, Edy Herianto Majlan, Kee Shyuan Loh, Teuku Husaini, Rosemilia Rosli. (2019). Oxygen Reduction Reaction Behaviours Of Carbon Nanotubes Supporting Pt Catalyst For Proton Exchange Membrane Fuel Cell. - Malaysian Journal Of Analytical Sciences. 147-154. |
| Lijun Shan, Abdul Amir H. Kadhum, M.s.h. Al-furjan, Wenjian Weng, Youping Gong, Kui Cheng, Maoying Zhou, Lingqing Dong, Guojin Chen, Mohd S. Takriff, Abu Bakar Sulong. (2019). In Situ Controlled Surface Microstructure Of 3d Printed Ti Alloy To Promote Its Osteointegration. - Materials. 1-13. |
| H. Hanizam, M.s. Salleh, M.z. Omar, A.b. Sulong. (2019). Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. - Journal Of Alloys And Compounds. 83-90. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Teuku Husaini, Edy Herianto Majlan, Masli Irwan Rosli, Muhammad Firdaus Aman. (2019). Fabrication Of Multi-filler Mcf/mwcnt/sg-based Bipolar Plates. - Ceramics International. . |
| M. A. Haque, A. B. Sulong, E. H. Majlan, K. S. Loh, T. Husaini, R. Rosli. (2019). Physiochemical Characteristics Of Solid Electrolyte Membranes For High-temperature Pem Fuel Cell. - International Journal Of Electrochemical Science. . |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Rafi Raza, Mohd Ikram Ramli. (2019). Incorporation Of Wollastonite Bioactive Ceramic With Titanium For Medical Applications: An Overview. - Materials Science & Engineering C. . |
| Rosli, R.e., Sulong, A.b., Daud, W.r.w., Zulkifley, M.a., Rosli, M.i., Majlan, E.h., Haque, M.a. & Radzuan N.a.m.. (2019). The Design And Development Of An Ht-pemfc Test Cell And Test Station. - International Journal Of Hydrogen Energy. 30763-30771. |
| Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Mohd Khairul Fadzly Md Radzi, Nur Farhani Ismail, Dulina Tholibon, Izdihar Tharazi. (2019). Effects Of Thermal Cycling On Physical And Tensile Properties Of Injection Moulded Kenaf/carbon Nanotubes/polypropylene Hybrid Composites. - Composites Part B: Engineering. . |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu, Ahmad Tajuddin Abdullah, Teuku Husaini, Ros Emilia Rosli, Edy Herianto Majlan, Masli Irwan Rosli. (2019). Fibre Orientation Effect On Polypropylene/milled Carbon Fiber Composites In The Presence Of Carbon Nanotubes Or Graphene As A Secondary Filler: Application On Pem Fuel Cell Bipolar Plate. - International Journal Of Hydrogen Energy. 30618-30626. |
| Nabilah Afiqah Mohd Radzuan, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria Bin Razak, Izdihar Binti Tharizi, Abu Bakar Sulong, Che Hassan Che Haron, Norhamidi Muhamad. (2019). Kenaf Composites For Automotive Components: Enhancement In Machinability And Moldability. - Polymers. 1-10. |
| Hashim Hanizam, Mohd Shukor Salleh, Mohd Zaidi Omar, Abu Bakar Sulong. (2019). Optimisation Of Mechanical Stir Casting Parameters For Fabrication Of Carbon Nanotubes-aluminium Alloy Composite Through Taguchi Method. - Journal Of Materials Research And Technology-jmr&t. 2223-2231. |
| Nabilah Afiqah Mohd Radzuan , Abu Bakar Sulong, David Hui And Anil Verma. (2019). Electrical Conductivity Performance Of Predicted Modified Fibre Contact Model For Multi-filler Polymer Composite. - Polymers. 1-12. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria. (2019). Effect Of Sintering On The Microstructure And Mechanical Properties Of Alloy Titaniumwollastonite Composite Fabricated By Powder Injection Moulding Process. - Ceramics International. 11648-11653. |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Ikram Ramli. (2019). Rheological Properties Of Titanium-hydroxyapatite With Powder Space Holder Composite Feedstock For Powder Injection Moulding. - International Journal Of Advanced Manufacturing Technology. 2591-2599. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2019). Influence The Filler Orientation On The Performance Of Bipolar Plate. - Sains Malaysiana. 669-676. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria. (2018). Pengoptimuman Parameter Pengacuan Suntikan Terhadap Ketumpatan Jasad Anum Untuk Komposit Aloi Titanium-wolastonit. - Sains Malaysiana. . |
| Majid Niaz Akhtar, A.b. Sulong, M.n. Akhtar, Muhammad Azhar Khan. (2018). Systematic Study Of Ce3þ On The Structural And Magnetic Properties Of Cu Nanosized Ferrites For Potential Applications. - Journal Of Rare Earths. 156-164. |
| Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong. (2018). Microstructure And Physical And Mechanical Properties Of Micro Cemented Carbide Injection. - Powder Technology. 151-158. |
| Majid Niaz Akhtar, Abu Bakar Sulong, A. Umer, Ammar Bin Yousaf, Muhammad Azhar Khan. (2018). Multi-component Mwcnt/ng/ep-based Bipolar Plates With Enhanced Mechanical And Electrical Characteristics Fabricated By Compression Moulding. - Ceramics International. . |
| Najla Nazihah Mas'ood, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farhana Mohd Foudzi, Mohd Ikram Ramli, Farrahshaida Mohd Salleh. (2018). Flow Behavior And Injectability Of Ss17-4ph With Ps And Pe Binders In Powder Injection Molding. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 121-125. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Farhana Mohd Foudzi, Mohannad Saleh Hammadi Al-furjan. (2018). Effect Of Sintering Parameters On Physical And Mechanical Properties Of Powder Injection Moulded Stainless Steel Hydroxyapatite Composite. - Plos One. 1-17. |
| Qian Wen Yean, Abu Bakar Sulong, Soon Huat Tan. (2018). Asymmetric Membrane Containing Electrospun Cu-btc/poly(vinyl Alcohol) For Pervaporation Dehydration Of 1,4-dioxane. - Separation And Purification Technology. . |
| Majid Jafarzadehghoushji, R. Alebrahim, Rozli Zulkifli, Abu Bakar Sulong, Shahrum Abdullah, Che Husna Azhari. (2018). Crashworthiness Characteristics Of Natural Ramie/bio-epoxy Composite Tubes For Energy Absorption Application. - Iranian Polymer Journal. . |
| Ukwueze, Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri. (2018). Solvent De-binding Of Bi-material Green Component Of Two-component Powder Injection Moulded Stainless Steel And Zirconia. - International Journal Of Mechanical & Mechatronics Engineering. . |
| N.f. Ismail, N. Muhamad, A.b. Sulong & C.h.c. Haron. (2018). Effects Of Alkali Treatment On Mechanical Properties Of Epoxy Composites Reinforced Kenaf Fibre Using Compression Moulding Process. - International Journal Of Mechanical & Mechatronics Engineering. . |
| Najlaa Nazihah Mas'ood, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farhana Mohd Foudzi, Mohd Ikram Ramli, Farrahshaida Mohd Salleh. (2018). Flow Behavior And Injectability Of Ss17-4ph With Ps And Pe Binders In Powder Injection Molding. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. . |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Farhana Mohd Foudzi , Mohannad Saleh Hammadi Al-furjan. (2018). Effect Of Sintering Parameters On Physical And Mechanical Properties Of Powder Injection Moulded Stainless Steel-hydroxyapatite Composite. - Plos One. . |
| Nor Nabilla Kadiman, Muhammad Omar Abdul Rashid, Norhamidi Muhamad Dan Abu Bakar Sulong. (2018). Effects Of Sintering Temperature On The Physical And Mechanical Properties Of Injection-molded Copper/graphene Composite. - Journal Of Advanced Manufacturing Technology. . |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong , Mahendra Rao Somalu , Edy Herianto Majlan, Teuku Husaini And Masli Irwan Rosli. (2018). Effects Of Die Configuration On The Electrical Conductivity Of Polypropylene Reinforced Milled Carbon Fibers: An Application On A Bipolar Plate. - Polymers. . |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Mohd Ikram Ramli, Bonaventure Ukwueze, Wan Sharuzi Wan Harun Dan Rahimi L. Mahmud. (2018). Fabrication Of Porous Titaniumhydroxyapatite Composite Via Powder Metallurgy With Space Holder Method. - Journal Of Advanced Manufacturing Technology. . |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana, Ruey Shan Chen, Mohd Hafizuddin Ab Ghani, Sahrim Ahmad. (2018). Uv/o3 Treatment As A Surface Modification Of Rice Husk Towards Preparation Of Novel Biocomposites. - Plos One. . |
| Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Mohd Rizal Mamat,izdihar Tharazi, Dulina Tholibon, Radwan Dweiri, Mohannad Saleh Hammadi. (2018). Kenaf Reinforced Pla Composite Thermoforming: A Numerical Simulation. - International Journal Of Integrated Engineering. . |
| Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Mohd Khairol Fadzly Md Radzi, Dulina Tholibon, Izdihar Tharazi & Nur Farhani Ismail. (2018). The Effects Of Maleic Anhydride Grafted Pp (mapp) On The Mechanical Properties Of Injection Moulded Kenaf/cnts/pp Composites. - Sains Malaysiana. . |
| Nor Nabilla Kadiman, Julie Elvyana Romli, Norhamidi Muhamad, Abu Bakar Sulong & Farhana Mohd Foudzi. (2018). Pengoptimuman Parameter Sonikasi Dan Pengacauan Magnetik Bagi Mendapatkan Penyerakan Sebati Komposit Kuprum-grafin Berdasarkan Sifat Morfologi. - Sains Malaysiana. . |
| Radwan Dweiri, Hendra Suherman, Abu Bakar Sulong And Jafar F. Al-sharab. (2018). Structure-property-processing Investigation Of Electrically Conductive Polypropylene Nanocomposites. - Science And Engineering Of Composite Materials. . |
| A A Abdullah, H Norita, H N Azlina, A B Sulong, N N Masood. (2018). Preparation Of Ss316l Mim Feedstock With Biopolymer As A Binder. - Iop Conference Series: Materials Science And Engineering. . |
| Hendra Suherman, Abu Bakar Sulong, Mohd Yusuf Zakaria, Nishata Royan, And Jaafar Sahari. (2018). Electrical Conductivity And Physical Changes Of Functionalized Carbon Nanotube/graphite/stainless Steel (ss316l)/polypropylene Composites Immersed In An Acidic Solution. - Songklanakarin Journal Of Science And Technology. . |
| Zakaria Razak , Abu Bakar Sulong, Norhamidi Muhamad, Mohd. Khairul Fadzly Md Radzi, Nur Farhani Ismail, Dulina Tholibon And Izdihar Tharazi. (2018). Numerical Simulation Analysis Of Wood/pp Composites For Injection-moulded Car Battery Trays. - International Journal Of Engineering And Technology(uae). . |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu,hendra Suherman. (2018). Electrical Conductivity Models Of Die Configuration For Polypropylene-reinforced Milled Carbon Fibre. - Journal Of Advanced Manufacturing Technology. . |
| Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong. (2018). Investigation On Feedstock Preparation For Micro-cemented Carbide Injection Molding. - Powder Metallurgy Progress. 96-102. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Jaafar Sahari. (2017). A Review Of Electrical Conductivity Models For Conductive Polymer Composite. - International Journal Of Hydrogen Energy. 9262-9273. |
| Ahmad,r.n., Muhamad,n., Sulong, A.b., Wahi, A., Salleh, F.m.. (2017). Rheological Properties Of Titanium Niobium Based Feedstocks For Metal Injection Molding. - Journal Of Mechanical Engineering. 139-149. |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana, Mohd Hafizuddin Ab Ghani, Sahrim Ahmad. (2017). Pengoptimumam Pemprosesan Komposit Rhdpe Berpenguat Sekam Padi Dengan Kaedah Tindak Balas Permukaan (rsm). - Sains Malaysiana. 1749-1756. |
| Nur Fawwaz Asri, T. Husaini, Edy Herianto Majlan, Abu Bakar Sulong, Wan Ramli Wan Daud. (2017). Electrochemical Behaviour And Interfacial Contact Resistance Of Ti-6al-4v And Sus 316l Plates With Potential Application As A Bipolar Plate In Pemfc. - Journal Of Mechanical Engineering. 155-170. |
| Asri,n.f., Husaini,t., Majlan, E.h., Sulong,a.b., Daud, W.r.w.. (2017). Electrochemical Behaviour And Of Ti-6al-4v And Sus 316l Plates With Potential Application As A Bipolar Plate In Pemfc. - Journal Of Mechanical Engineering. 155-170. |
| Majid J Ghoushji, Rahim A Eshkoor, Rozli Zulkifli, Abu B Sulong, Shahrum Abdullah And Che H Azhari. (2017). Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes. - Journal Of Reinforced Plastics And Composites. . |
| Gaaz,t.s., Sulong, A.b., Kadhum, A.h.. (2017). Influence Of Sulfuric Acid On The Tensile Properties Of Halloysite Reinforced Polyurethane Composite. - Journal Of Mechanical Engineering. 1-10. |
| Ukwueze Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri. (2017). The Characterization And Rheological Investigation Of Materials For Powder Injection Molding. - Journal Of Mechanical Engineering. 97-107. |
| Nor Nabilla Kadiman, Julie Elbyana Romli, Norhamidi Muhamad, Abu Bakar Sulong, Farhana Mohd Foudzi. (2017). Pengoptimuman Parameter Sonikasi Dan Pengacauan Magnetik Bagi Mendapatkan Penyerakan Sebati Komposit Kuprum-grafin Berdasarkan Sifat Morfologi. - Sains Malaysiana. 1039-1043. |
| Farrahshaida Mohd Salleh, Abu Bakar Sulong, Farhana Mohd Foudzi, Intan Fadhlina Mohamed, Natasha Emira Azaman, Najla Nazihah Mas'ood, Seong Jin Park. (2017). Flow Behavior Characterization Of Hydroxyapatite For Powder Injection Molding (pim). - Journal Of Mechanical Engineering. 77-88. |
| Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir And Ahmed A. Al Amiery. (2017). Optimizing Physio Mechanical Properties Of Halloysite Reinforced Polyurethane Nanocomposites By Taguchi Approach. - Science Of Advanced Materials. 1-13. |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana,mohd Hafizuddin Ab Ghani,sahrim Ahmad. (2017). Pengoptimumam Pemprosesan Komposit Rhdpe Berpenguat Sekam Padi Dengan Kaedah Tindak Balas Permukaan (rsm). - Sains Malaysiana. . |
| Majid Niaz Akhtar, A. Rahman, A.b. Sulong, Muhammad Azhar Khan. (2017). Structural, Spectral, Dielectric And Magnetic Properties Of Ni0.5mgxzn0.5-xfe2o4 Nanosized Ferrites For Microwave Absorption And High Frequency Applications. - Ceramics International. 4357-4365. |
| Tayser Sumer Gaaz, Abdul Amir H Kadhum, Patina Kiah Anak Michael, Ahmed Al Amiery, Abu Bakar Sulong, Abu Bakar Sulong, Mohamed H Nassir, Ahmed Hameed Jaaz. (2017). Unique Halloysite Nanotubes Polyvinyl Alcohol Polyvinylpyrrolidone Composite Complemented With Physico Chemical Characterization. - Polymers. 207-222. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria. (2017). Rheological Properties Of Titanium Alloy Ti6al4v Wollastonite W Composite Using Palm Stearin As Based Binder. - Journal Of Mechanical Engineering. 87-96. |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Mohd Ikram Ramli, Muhammad Rafi Raza. (2017). Determination Of Critical Powder Loading Of Titanium Hydroxyapatite With Powder Space Holder For Powder Injection Molding Feedstocks. - Journal Of Mechanical Engineering. 11-21. |
| Nur Farhani Ismail, Norhamidi Muhamad, Abu Bakar Sulong, Che Hassan Che Haron, Dulina Tholibon, Izdihar Tharazi, Mohd Khairul Fadzly Mdradzi, Zakaria Razak. (2017). Mechanical Properties Of Compression Molded Epoxy Polymer Composites Reinforced With Kenaf Fibers. - Journal Of Mechanical Engineering. 1-12. |
| Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Izdihar Tharazi, Mohd Khairul Fadzly Md Radzi. (2017). Optimization Of Hot Pressing Process For Unidirectional Kenaf Polypropylene Composites By Full Factorial Design. - Journal Of Mechanical Engineering. 23-35. |
| Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Khairul Fadzly Mdradzi, Dulina Tholibon, Izdihar Tharazi, Nur Farhani Ismail. (2017). Effect Of Multi-walled Carbon Nanotube On Mechanical Properties Of Kenaf/polypropylene Composites. - Journal Of Mechanical Engineering. 107-117. |
| Ghoushji, M.j., Eshkoor, R.a., Zulkifli, R., Sulong, A.b., Abdullah, S., Azhari, C.h.. (2017). Energy Absorption Capability Of Axially Compressed Woven Natural Ramie/green Epoxy Square Composite Tubes. - Journal Of Reinforced Plastics And Composites. 1028-1037. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2017). Electrical Properties Of Extruded Milled Carbon Fibre And Polypropylene. - Journal Of Composite Materials. 3187-3195. |
| Salleh, F.m., Sulong, A.b., Raza, M.r., Muhamad,n., Fhang, L.t. (2017). Effect Of Space Holders On Fabrication Of Porous Titanium Alloy-hydroxyapatite Composite Through Powder Injection Molding. - Sains Malaysiana. 1651-1657. |
| Gaaz, Ts., Sulong, A.b., Ansari, M.n.m., Kadhum, A.a.h., Al-amiery, A.a., Nassir, M.h.. (2017). Effects Of Starch Loading On The Thermo Mechanical And Morphological Properties Of Polyurethane Composites. - Materials. 1-14. |
| Amir Arifin, Abu Bakar Sulong, Lee Choy Fun, Gunawan And Irsyadi Yani. (2017). Porous Titanium Alloy/hydroxyapatite Composite Using Powder Compaction Route. - Journal Of Mechanical Engineering And Sciences. . |
| Gaaz, T.s., Sulong, A.b., Kadhum, A.a.h., Al-amiery, A.a., Nassir, M.h., Jaaz, A.h.. (2017). The Impact Of Halloysite On The Thermo-mechanical Properties Of Polymer Composites. - Molecules. 838-858. |
| M. Ahsanul Haque , A.b. Sulong, K.s. Loh, E. Herianto Majlan,t. Husaini, R. Emilia Rosli. (2017). Acid Doped Polybenzimidazoles Based Membrane Electrode Assembly For High Temperature Proton Exchange Membrane Fuel Cell: A Review. - International Journal Hydrogen Energy. 9156-9179. |
| Raza, M.r., Ahmad, F., Muhamad, N., Sulong, A.b., Omar, M.a., Akhtar, M.n., Aslam, M., Sherazi, I.. (2017). Effects Of Debinding And Sintering Atmosphere On Properties And Corrosion Resistance Of Powder Injection Molded 316 L - Stainless Steel. - Sains Malaysiana. 285-293. |
| Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan, Wan Ramli Wan Daud. (2017). Coating Of Stainless Steel And Titanium Bipolar Plates For Anticorrosion In Pemfc: A Review. - International Journal Of Hydrogen Energy. 9135-9148. |
| Gaaz, T.s., Sulong, A.b., Kadhum, A.a.h., Nassir, M.h., Al-amiery, A.a.. (2017). Surface Improvement Of Halloysite Nanotubes. - Applied Sciences (switzerland). 291-299. |
| Salleh F.m., Sulong A.b., Raza M.r., Muhamad N., Fhang L.t.. (2017). Effects Of Space Holder On Fabrication Of Porous Titanium Alloy-hydroxyapatite Composite Through Powder Injection Molding. - Sains Malaysiana. . |
| Tayser Sumer Gaaz , Abu Bakar Sulong , Abdul Amir H. Kadhum , Mohamed H. Nassir , Ahmed A. Al-amiery. (2017). Absolute Variation Of The Mechanical Characteristics Of Halloysite Reinforced Polyurethane Nanocomposites Complemented By Taguchi And Anova Approaches. - Results In Physics. 3287-3300. |
| M.f.f.a.hamidi, W.s.w.harun, M.samykano, S.a.c.ghani, Z.ghazali, F.ahmad, A.b.sulong. (2017). A Review Of Biocompatible Metal Injection Moulding Process Parameters For Biomedical Applications. - Materials Science And Engineering C. 1263-1276. |
| Nabilah Afiqah Mohd Radzuan,mohd Yusuf Zakaria, Abu Bakar Sulong,jaafar Sahari. (2017). The Effect Of Milled Carbon Fibre Filler On Electrical Conductivity In Highly Conductive Polymer Composites. - Composites Part B : Engineering. 153-160. |
| R.e. Rosli, A.b. Sulong, W.r.w. Daud, M.a. Zulkifley, T. Husaini, M.i. Rosli, E.h. Majlan, M.a. Haque. (2017). A Review Of High-temperature Proton Exchange Membrane Fuel Cell (ht-pemfc) System. - International Journal Of Hydrogen Energy. 9293-9314. |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana Mohd, Mohd Hafizuddin Abdul Ghani, Sahrim Ahmad. (2017). Effect Uv/o3 Modified Rice Husk On The Mechanical Properties Of Recycle Hdpe Rice Husk Composite. - Journal Of Mechanical Engineering. 13-22. |
| Nurul Akidah Baharuddin, Andanastuti Muchtar, Mahendra Rao Somalu, Abu Bakar Sulong, Huda Abdullah. (2016). Pengaruh Suhu Sinter Terhadap Prestasi Elektrokimia Katod Komposit Sel Bahan Api Oksida Pepejal (sofc) Lscf-sdcc. - Sains Malaysiana. 459-465. |
| Majid Niaz Akhtar, Abu Bakar Sulong , Mukhtar Ahmad, Muhammad Azhar Khan,akbar Ali, M.u. Islam. (2016). Impacts Of Gdece On The Structural, Morphological And Magnetic Properties Of Garnet Nanocrystalline Ferrites Synthesized Via Solegel Route. - Journal Of Alloys And Compounds. 486-495. |
| Majid Niaz Akhtar, Abu Bakar Sulong, Saniah Ab Karim, Che Husna Azhari, Mr Raza. (2016). Evaluation Of Thermal, Morphological And Mechanical Properties Of Pmma/nacl/dmf Electrospun Nanofibers: An Investigation Through Surface Methodology Approach. - Iranian Polymer Journal. 1025-1038. |
| Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad , Abu Bakar Sulong , M.a. Omar,majid Niaz Akhtar, Muhammad Aslam. (2016). Effects Of Solid Loading And Cooling Rate On The Mechanical Properties And Corrosion Behavior Of Powder Injection Molded 316 L Stainless Steel. - Powder Technology. 135-142. |
| Abu Bakar Sulong, Amir Arifin, Zambri Harun. (2016). Jig Prototype For Computer-assisted Total Knee Replacement And Its Flow Simulation. - International Journal Of Technology. 132-140. |
| Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir And Ahmed A. Al-amiery. (2016). Impact Of Sulfuric Acid Treatment Of Halloysite On Physico-chemic Property Modification. - Materials. 1-16. |
| Majid Niaz Akhtar, Abu Bakar Sulong, Muhammad Azhar Khan, Mukhtar Ahmad, Ghulam Murtaza, M.r. Raza, R. Raza, M. Saleem, M. Kashiff. (2016). Structural And Magnetic Properties Of Yttrium Iron Garnet (yig) And Yttrium Aluminum Iron Garnet (yaig) Nanoferrites Prepared By Microemulsion Method. - Journal Of Magnetism And Magnetic Materials. 425-431. |
| Tayser Sumer Gaas, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir And Ahmed A. Al Amiery. (2016). Optimizing Injection Molding Parameters Of Different Halloysites Type Reinforced Thermoplastic Polyurethane Nanocomposites Via Taguchi Complemented With Anova. - Materials. 1-19. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2016). Pengoptimuman Proses Penyemperitan Gentian Karbon Terkisar Dan Polipropilena Bagi Komposit Polimer Pengalir. - Sains Malaysiana. 1913-1921. |
| Iswandi, Jaafar Sahari, Abu Bakar Sulong, Teuku Husaini. (2016). Critical Powder Loading And Rheological Properties Of Polypropylene/graphite Composite Feedstock For Bipolar Plate Application. - Malaysian Journal Of Analytical Sciences. 687-696. |
| Majid Niaz Akhtara, Abu Bakar Sulong, M.k. Fadzly Radzi, N.f. Ismail, M.r. Razab, Norhamidi Muhamad, Muhammad Azhar Khan. (2016). Influence Of Alkaline Treatment And Fiber Loading On The Physical And Mechanical Properties Of Kenaf/polypropylene Composites For Variety Of Applications. - Progress In Natural Science: Materials International. 657-664. |
| Gaaz, T.s., Sulong, A.b., Ansari,m.n.m., H Kadhum, A.a., Al-amiery, A.a., Al-furjan, M.s.h.. (2016). Effect Of Halloysite Nanotubes Loading On Thermo-mechanical And Morphological Properties Of Polyurethane Nanocomposites. - Materials Technology. 430-442. |
| Wahi A., Muhamad N., Sulong A.b., Ahmad R.n.. (2016). Effect Of Sintering Temperature On Density, Hardness And Strength Of Mim Co30cr6mo Biomedical Alloy. - Funtai Oyobi Fummatsu Yakin/journal Of The Japan Society Of Powder And Powder Metallurgy. 434-437. |
| Baharuddin N.a., Muchtar A., Somalu M.r., Sulong A.b., Abdullah H.. (2016). Effects Of Sintering Temperature On The Electrochemical Performance Of Solid Oxide Fuel Cell (sofc) Composite Cathode Lscf-sdcc. - Sains Malaysiana. 459-465. |
| Tatt T.k., Muhamad N., Muchtar A., Sulong A.b., Cherng N.m.. (2016). Influence Of Sintering Parameters On The Compressive Yield Strength Of Stainless Steel Foams Produced By The Space Holder Method. - Sains Malaysiana. 653-658. |
| Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhammad, Nur Farhani Ismail, Izdihar Tharazi, Mohd Khairul Fadzly Md Radzi. (2016). Tensile Properties Of Unidirectional Kenaf Fiber Polypropylene Composite. - Jurnal Teknologi. 101-106. |
| Mohd Khairul Fadzly Md Radzi, Abu Bakar Sulong, Baharuddin Mohd Zanggi, Norhamidi Muhammad. (2016). Mouldability Of Wood Filler Reinforced Polypropylene Composite For Injection Moulded Engine Cover Using Mould Filing Simulation. - Jurnal Teknologi. 75-81. |
| Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum. (2016). Effect Of Hnts Addition In The Injection Moulded Thermoplastic Polyurethane Matrix On The Mechanical And Thermal Properties. - Sains Malaysiana. 1235-1242. |
| Ismail, N. F., Sulong, A. B.*, Muhamad, N., Tholibon, D., Mdradzi, M. K. F. Wan Ibrahim, W. A. S.. (2015). Review Of The Compression Moulding Of Natural Fiber Reinforced Thermoset Composites Material Processing And Characterisations. - Pertanika Journal Of Science And Technology. 533-547. |
| Md Radzi M. K. F., Sulong, A. B., Muhamad, N., Mohd Latiff, M. A., And Ismail, N. F.. (2015). Effect Of Filler Loading And Naoh Addition On Mechanical Properties Of Moulded Kenaf Polypropylene Composite. - Pertanika Journal Tropical Agricultural Science. 583-590. |
| Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif. (2015). Characterization Of Hydroxyapatite Ti6al4v Composite Powder Under Various Sintering Temperature. - Jurnal Teknologi. 27-31. |
| Wong Yee Ning, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Muhammad Rafi Raza. (2015). Effects Of Vanadium Carbide On Sintered Wc-10%co Produced By Micro-powder Injection Molding. - Sains Malaysiana. 1175-1181. |
| J. Rajabi, A. B. Sulong, N. Muhamad, M. R. Raza. (2015). Powder Compaction Of Bi-materials:stainless Steel 316l And Nanocrystaline Yttria Stabilized Zirconia. - Materials Technology. 313-320. |
| Tayser Sumer Gaaz, Abu Bakar Sulong , Majid Niaz Akhtar , Abdul Amir H. Kadhum, Abu Bakar Mohamad And Ahmed A. Al Amiery. (2015). Properties And Applications Of Polyvinyl Alcohol, Halloysite Nanotubes And Their Nanocomposites. - Molecules. 22833-22847. |
| Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif, Mohd Ikram Ramli. (2015). Powder Injection Molding Of Ha Ti6al4v Composite Using Palm Stearin As Based Binder For Implant Material. - Material And Design. 1028-1034. |
| Eshkoor R.a., Ude A.u., Sulong A.b., Zulkifli R., Ariffin A.k., Azhari C.h.. (2015). Energy Absorption And Load Carrying Capability Of Woven Natural Silk Epoxy - Triggered Composite Tubes. - Composites Part B: Engineering. 10-18. |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Jaafar Sahari, Hendra Suherman,. (2015). Effect Of The Addition Of Milled Carbon Fiber As A Secondary Filler On The Electrical Conductivity Of Graphite/epoxy Composites For Electrical Conductive Materials. - Composite Part B. 75-80. |
| Fayyaz A., Muhamad N., Sulong A.b., Yunn H.s., Amin S.y.m., Rajabi J.. (2015). Micro-powder Injection Molding Of Cemented Tungsten Carbide: Feedstock Preparation And Properties. - Ceramics International. 3605-3612. |
| W.m.f Wan Mahmood, J.a. Ghani, N. Saibani, Z. Harun, A.b. Sulong, M.j. Ghazali, M.r.a. Mansor, S. Abdullah. (2015). Performance Of Undergraduate Students In Conducting Research In Two Engineering Programmes. - Journal Of Engineering Science And Technology. 52-60. |
| Rajabi J., Zakaria H., Muhamad N., Sulong A.b., Fayyaz A.. (2015). Fabrication Of Miniature Parts Using Nano-sized Powders And An Environmentally Friendly Binder Through Micro Powder Injection Molding. - Microsystem Technologies. 1131-1136. |
| S.a. Muhammed Ali, Ros Emilia Rosli, Andanastuti Muchtar, Abu Bakar Sulong, Mahendra Rao Somalu, Edy Herianto Majlan. (2015). Effect Of Sintering Temperature On Surface Morphology And Electrical Properties Of Samarium-doped Ceria Carbonate For Solid Oxide Fuel Cells. - Ceramics International. 1323-1332. |
| Muhammad Rafi Raza, Abu Bakar Sulong, Norhamidi Muhamad, Majid Niaz Akhtar, Javad Rajabi. (2015). Effects Of Binder System And Processing Parameters On Formability Of Porous Ti/ha Composite Through Powder Injection Molding. - Materials And Design. 386-392. |
| Nurul Akidah Baharuddin, Hamimah Ab Rahman, Andanastuti Muchtar, Abu Bakar Sulong & Huda Abdullah. (2014). Kesan Masa Pengendapan Dan Saiz Elektrod Pembalik Dalam Penghasilan Katod Komposit Lscf-sdc Karbonat Sel Fuel Oksida Pepejal. - Sains Malaysiana. 43(4): 595-601. |
| Wan Hasbulalfi Wan Haron, Dulina Tholibon, Abu Bakar Sulong, Nur Farhani Ismail. (2014). Composite Based Mixed Recycled Plastic With Tropical Wood Dust Mechanical And Physical Properties. - Australian Journal Of Basic And Applied Sciences. 288-291. |
| Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Muhammad Rafi Raza. (2014). The Effect Of Nano-sized Stainless Steel Powder Addition On Mechanical And Physical Properties Of Micropowder Injection Molded Part. - Materials And Design. 223-232. |
| M. I. Ramli, A. B. Sulong, N. Muhamad, A. Muchtar And A. Arifin. (2014). Stainless Steel 316l Hydroxyapatite Composite Via Powder Injection Moulding: Rheological And Mechanical Properties Characterisation. - Material Research Innovation. 100-104. |
| Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif, Mohd Ikram Ramli. (2014). Material Processing Of Hydroxyapatite And Titanium Alloy (ha/ti) Composite As Implant Materials Using Powder Metallurgy: A Review. - Materials And Design. 55:165-175. |
| Hafizawati Zakaria, Norhamidi Muhamad, Abu Bakar Sulong, Mohd Halim Irwan Ibrahim, Farhana Mohd Foudzi. (2014). Moldability Characteristics Of 3mol Yttria Stabilized Zirconia Feedstock For Micro-powder Injection Molding Process. - Sains Malaysiana. 129-136. |
| Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong, Javad Rajabi, Yee Ning Wong. (2014). Fabrication Of Cemented Tungsten Carbide Components Bymicro-powder Injection Moulding. - Journal Of Materials Processing Technology. 214:1436-1444. |
| R.a. Eshkoor, A.u. Ude, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari. (2014). Failure Mechanism Of Woven Natural Silk/epoxy Rectangular Composite Tubes Under Axial Quasi-static Crushing Test Using Trigger Mechanism. - International Journal Of Impact Engineering. 53-61. |
| S.y. Heng, M.r. Raza, N. Muhamad, A.b. Sulong, A. Fayyaz. (2014). Micro Powder Injection Molding (upim) Of Tungsten Carbide. - International Journal Of Refractory Metals And Hard Materials. 45:189-195. |
| Baharuddin N.a., Rahman H.a., Muchtar A., Sulong A.b., Abdullah H.. (2014). Effects Of Deposition Time And Counter-electrode Size On The Fabrication Of Lscf-sdc Carbonate Composite Cathode For Sofc. - Sains Malaysiana. 595 - 601. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong, Hafizawati Zakaria. (2013). Yttria Stabilized Zirconia Formed By Micro Ceramic Injection Molding: Rheological Properties And Debinding Effects On The Sintered Part. - Ceramics International. 39(3):2665-2674. |
| Qian Wen Yeang, Sharif Hussein Sharif Zein, Abu Bakar Sulong, Soon Huat Tan. (2013). Comparison Of The Pervaporation Performance Of Various Types Of Carbon Nanotube-based Nanocomposites In The Dehydration Of Acetone. - Separation And Purification Technology. 107:252-263. |
| R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari. (2013). Comparative Research On The Crashworthiness Characteristics Of Woven Natural Silk/epoxy Composite Tubes. - Materials And Design. 47:248-257. |
| Shye Yunn Heng, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Sri Yulis M. Amin. (2013). Effect Of Sintering Temperature On The Mechanical And Physical Properties Of Wc-10%co Through Micro-powder Injection Molding (mpim). - Ceramics International. 39:4457-4464. |
| Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong. (2013). Effect Of Small-sized Conductive Filler On The Properties Of An Epoxy Composite For A Bipolar Plate In A Pemfc. - Ceramics International. 39(6):7159-7166. |
| Mohd Faizal Mat Tahir, Norkamaliana Khamis, Zaliha Wahid, Ahmad Kamal Ariffin Mohd Ihsan, Jaharah Ab Ghani, Mohd Anas Mohd Sabri, Zainuddin Zajuri, Shahrum Abdullah, Abu Bakar Sulong. (2013). Direct Measurement And Evaluation For Mechanical Engineering Programme Outcomes: Impact On Continuous Improvement. - International Education Studies. 161-167. |
| R.a. Eshkoor, S.a. Oshkovr, A.b. Sulong, R. Zulkifli, A.k. Ariffin, C.h. Azhari. (2013). Effect Of Trigger Configuration On The Crashworthiness Characteristics Of Natural Silk Epoxy Composite Tubes. - Composites Part B: Engineering. 55:5-10. |
| Abu Bakar Sulong, Mohd Ikram Ramli, Seow Liang Hau, Jaafar Sahari, Norhamidi Muhamad, Hendra Suherman. (2013). Rheological And Mechanical Properties Of Carbon Nanotube/graphite/ss316l/polypropylene Nanocomposite For A Conductive Polymer Composite. - Composite: Part B. 50:54-61. |
| Muhammad Ilman Hakimi Chua, Abu Bakar Sulong, Mohd Fazuri Abdullah & Norhamidi Muhamad. (2013). Optimization Of Injection Molding And Solvent Debinding Parameters Of Stainless Steel Powder (ss316l) Based Feedstock For Metal Injection Molding. - Sains Malaysiana. 42(12):1743-1750. |
| Hendra Suherman, Abu Bakar Sulong, Jaafar Sahari. (2013). Effect Of The Compression Molding Parameters On The In-plane And Through-plane Conductivity Of Carbon Nanotubes/graphite/epoxy Nanocomposites As Bipolar Plate Material For A Polymer Electrolyte...... - Ceramics International. 39(2):1277-1284. |
| Royan, Nishata Rajendran Royan; Sulong, Abu Bakar; Sahari, Jaafar; Suherman, Hendra. (2013). Effect Of Acid- And Ultraviolet/ozonolysis-treated Mwcnts On The Electrical And Mechanical Properties Of Epoxy Nanocomposites As Bipolar Plate Applications. - Journal Of Nanomaterials. Art no.717459. |
| Muhammed Ali S. A., Andanastuti Muchtar, Abu Bakar Sulong, Norhamidi Muhamad, Edy Herianto Majlan. (2013). Influence Of Sintering Temperature On The Power Density Of Samarium-doped-ceria Carbonate Electrolyte Composites For Low-temperature Solid Oxide Fuel Cells. - Ceramics International. 39(5):5813-5820. |
| Nor Kamaliana Khamis, Abu Bakar Sulong, Baba Md Deros. (2012). A Case Study On Peer Review And Lecturer Evaluations In An Academic Setting. - Asian Social Science. 8(16):192-199. |
| Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong. (2012). Effect Of Nano-sized Powders On Powder Injection Molding: A Review. - Microsystem Technologies. 18(12):1941-1961. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong, Hafizawati Zakaria. (2012). Yttria Stabilized Zirconia Formed By Micro Ceramic Injection Molding: Rheological Properties And Debinding Effects On The Sintered Part. - Ceramics International. 2665-2674. |
| Eghbal Hakimian, Abu Bakar Sulong. (2012). Analysis Of Warpage And Shrinkage Properties Of Injection-molded Micro Gears Polymer Composites Using Numerical Simulations Assisted By The Taguchi Method. - Materials And Design. 42:62-71. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Amir Arifin, Andanastuti Muchtar, Norhamidi Muhamad. (2012). Powder Injection Molding Of Ss316l/ha Composite: Rheological Properties And Mechanical Properties Of The Green Part. - Journal Of Applied Sciences Research. 8(11):5317-5321. |
| Amirhossein Mansourighasri, N. Muhamad, A. B. Sulong. (2012). Processing Titanium Foams Using Tapioca Starch As A Space Holder. - Journal Of Materials Processing Technology. 212:83-89. |
| Tan Koon Tatt, Norhamidi Muhamad, Andanastuti Muchtar, Abu Bakar Sulong, Heng Shye Yunn. (2012). Rheological Behaviour Of Novel Feedstock For Manufacturing Porous Stainless Steel Via (mim)-psh. - Jurnal Teknologi. 59:187-191. |
| Mohd Anas Mohd Sabri, Abu Bakar Sulong, Fung Kuon Chin, Jaafar Sahari. (2012). Effect Of Corrossion On The Electrical Conductivity Of Metals And Polymer Composite. - Jurnal Teknologi. 59(2):81-85. |
| Mohd Ruzi Harun, Norhamidi Muhamad, Abu Bakar Sulong, Nor Hafiez Mohamad Nor, Khairur Rijal Jamaludin, Mohd Halimirwan Ibrahim. (2012). Solvent Debinding Process For Zk60 Magnesium Alloy Mim Compact. - Jurnal Teknologi. 59:165-169. |
| Saniah Abdul Karim, Abu Bakar Sulong, Che Husna Azhari, Teng Her Lee, Ng Min Hwei. (2012). Optimization Of Electrospinning Parameters Using Response Surface Methods To Enhance Fiber Diameter, Mechanical Properties And Orientation Of Nanofibers. - Journal Of Applied Science Research. 8(5):250-2517. |
| Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong, Heng Shye Yunn, Sri Yulis M. Amin, Javad Rajabi. (2012). Effect Of Dry And Wet Ball Milling Process On Critical Powder Loading And Mixture Properties Of Fine Wc-10co-0.8vc Powder. - Jurnal Teknologi. 59:147-150. |
| Abu Bakar Sulong, Norhamidi Muhamad, Amir Arifin, Kuu Bi Yong. (2012). Optimizing Injection Parameter Of Metal Injection Molding Processes Using The Feedstock Of 16um Stainless Steel Powder (ss316l), Peg, Pmma And Stearic Acid. - Journal Of Applied Sciences Research. 8(6):2998-3003. |
| Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong, Abdolli Fayyaz, Azizah Wahi. (2012). Advantages And Limitations Of Using Nano Sized Powders For Powdew Injection Molding Process: A Review. - Jurnal Teknologi. 59:143-146. |
| Sulong, A.b, Park, J , Azhari, C.h , Jusoff, K. (2011). Process Optimization Of Melt Spinning And Mechanical Strength Enhancement Of Functionalized Multi-walled Carbon Nanotubes Reinforcing Polyethylene Fibers. - Composites Part B-engineering. 42(1):11-17. |
| Mohd H.i. Ibrahim, Norhamidi Muhamad, Abu B. Sulong, Khairur R. Jamaludin, Nor H.m. Nor And Sufizar Ahmad. (2011). Optimization Of Micro Metal Injection Molding With Multiple Performance Characteristics Using Grey Relational Grade. - Chiang Mai Journal Of Science. 38(2):231-241. |
| Abu Bakar Sulong, Joohyuk Park. (2011). Alignment Of Multi-walled Carbon Nanotubes In Polyethylene Matrix By Extrusion Shaer Flow: Mechanical Properties Enhancement. - Journal Of Composite Materials. 45(8):931-941. |
| M.h.i. Ibrahim, N. Muhamad, A.b. Sulong, K.r. Jamaludin, S. Ahmad And N.h.m. Nor. (2010). Optimization Of Micro Metal Injection Molding For Highest Green Strength By Using Taguchi Method. - International Journal Of Mechanical And Materials Engineering (ijmme). 5(2):282-289. |
| Hendra Suherman, Abu Bakar Sulong, Jaafar Sahari. (2010). Effect Of Filler Loading Concentration, Curing Temperature And Molding Pressure On The Electrical Conductivity Of Cnts/graphite/ Epoxy Nanocomposites At High Loading Of Conductive Fillers. - International Journal Of Mechanical And Materials Engineering. 5(1)74-79. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong, Hafizawati Zakaria. (2010). Flow Behavior Characteristic For Injection Process Using Nano-yttria Stabilized Zirconia For Micro Metal Injection Molding. - Applied Mechanics And Materials. 480-484. |
| Ibrahim M.h.i., Muhamad N., Sulong A.b.. (2009). Rheological Investigation Of Water Atomised Stainless Steel Powder For Micro Metal Injection Molding. - International Journal Of Mechanical And Materials Engineering. 4(1):1-8. |
| Sulong A.b., Azhari C.h., Zulkifli R., Othman M.r., Park J.. (2009). A Comparison Of Defects Produced On Oxidation Of Carbon Nanotubes By Acid And Uv Ozone Treatment. - European Journal Of Scientific Research. 33(2):295-304. |
| Rizauddin Ramli, Hidehiko Yamamoto, Abu Bakar Sulong, Dzuraidah Abdul Wahab, Jaber Abu Qudeiri. (2009). Real-time Agv Action Decision In Ad-fms By Hypothetical Reasoning. - European Journal Of Scientific Research. 25(2):310-324. |
| Sulong A.b., Muhamad N., Ghazali M.j., Jaharah A.g., Tan S.h., Park J.h.. (2009). Functionalized Mwcnts Reinforced Polyetehylene Fiber Composite: Mechanical Strength Characterization. - International Journal Of Modern Physics B. 23(6-7):1419-1424. |
| Rozli Zulkifli, Che Husna Azhari, Maryam J. Ghazali, Ahmad Rasdan Ismail, Abu Bakar Sulong. (2009). Interlaminar Fracture Toughness Of Multi-layer Woven Silk/epoxy Composites Treated With Coupling Agent. - European Journal Of Scientific Research. 27(3):454-462. |
| Sulong A.b., Muhamad N., Sahari J., Ramli R., Deros B.m., Park J.. (2009). Electrical Conductivity Behaviour Of Chemical Functionalized Mwcnts Epoxy Nanocomposites. - European Journal Of Scientific Research. 29(1):13-21. |
| M. J. Ghazali, A. A. Pauzi, C. H. Azhari, J. A. Ghani, A. B. Sulong And R. Mustafa. (2009). Effect Of Starch Binders In Alumina Coatings On Aisi 316 L Stainless Steel For Medical Application. - International Journal Of Modern Physics B. 23(6-7):1034-1039. |
| A. G. Jaharah, C. H. Che Hassan, M. J. Ghazali, A. B. Sulong, M. Z. Omar, M. Z.nuawi, A. R. Ismail. (2009). Performance Of Uncoated Carbide Cutting Tool When Machining Cast Iron In Dry Cutting Condition. - International Journal Of Modern Physics B. 23(6-7):1796-1802. |
| Joohyuk Park And Abu Bakar Sulong. (2007). Effect Of Chemically Surface Modified Mwnts On The Mechanical And Electrical Properties Of Epoxy Nanocomposites. - Studies In Surface Science And Catalysis. 165:405-408. |
| Abu Bakar Sulung And Joohyuk Park. (2007). Fabrication Of Carbon Nanotubes Reinforced Polyethylene Fibers By Melt Spinning: Process Optimization And Mechanical Strength Characterization. - Advanced Materials Research. 26-28:289-292. |
| Abu Bakar Sulong And Joohyuk Park. (2007). Dynamic Thermo-mechanical Properties Of Chemically Surface Modified Mwcnts Reinforced Polymeric Composites. - Advanced Materials Research. 26-28:285-288. |
| Aditya Reza Haswendra, Amir Arifin, Abu Bakar Sulong, Norhamidi Mohamad, Gunawan And Barlin. (2022). Human-centered Technology For A Better Tomorrow. - Human Engineering Symposium, Humens 2021 (lecture Notes In Mechanical Engineering). 289-297. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong And Farhana Mohd Foudzi. (2021). A Review On Bonding Of Polyamide Reinforced Carbon Fibre Via Additive Manufacturing. - Iop Conf. Series: Materials Science And Engineering. 1-6. |
| Nabilah Afiqah Mohd Radzuan, Mohammad Afiq Rashid, Dulina Tholibon, Abu Bakar Sulong And Che Hassan Che Haron. (2021). Kenaf Reinforced Polypropylene Composites: A Numerical Simulation. - Aip Conference Proceedings / 4th International Sciences, Technology & Engineering Conference (istec) 2020. 1-9. |
| Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Fathin Iliana Jamhari, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Wan Sharuzi Wan Harun, Mohannad Saleh Hammadi Al-furjan. (2021). Effect Of Energy Density On Properties Of Additive Manufactured Ti6al4v Via Slm. - International Conference On Powder Metallurgy And Particulate Materials (powdermet2021). 434-448. |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Seong Jin Park. (2019). Processing Of Stainless Steel (ss316l)-hydroxyapatite (ha) Powder Composite Through Powder Injection Molding. - Iop Conference Series: Journal Of Physics: Conference Series. 1-6. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu. (2018). Extrusion Process Of Polypropylene Composites Reinforced Milled Carbon Fibre For Conductive Polymer Composite Application. - 4th Engineering Science And Technology International Conference (estic 2018). 65-69. |
| Mohd Khairul Fadzly Md Radzi, Norhamidi Muhamad, Abu Bakar Sulong & Zakaria Razak. (2017). Optimizing Injection Parameters Of Kenaf Filler Polypropylene Composite By Taguchi Method. - 1st International Conference On Frontiers Of Composite Materials, Icfcm 2016. . |
| Tharazi, I., Sulong, A.b., Muhamad, N., Haron, C.h.c., Tholibon, D., Ismail., N.f., Radzi, M.k.f.m., Razak, Z.. (2017). Optimization Of Hot Press Parametres On Tensile Strength For Undirectional Long Kenaf Fiber Reinforced Polylactic-acid Composites. - Advances In Material And Processing Technologies Conference, Ampt 2017 (procedia Engineering). . |
| Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad & Mohd Ikram Ramli. (2017). Feedstock Preparation Of Titanium-hydroxyapatite With Temporary Space Holder For Powder Injection Molding. - Advanced Processes And Systems In Manufacturing An International Conference 2016. 1-2. |
| Amir Ariffin & Abu Bakar Sulong. (2017). Effect Of Mixing Parameters On The Mixing Time And Density Of Composite Ha/ti6al4v Feedstock For Powder Injection Molding. - 1st Sriwijaya International Conference On Engineering, Science And Technology, Sicest 2016. . |
| N Emira Binti Azaman, M Rafi Raza, N Muhamad, M Niaz Akhtar & A Bakar Sulong. (2017). Rheological Study Of Copper And Copper Grapheme Feedstock For Powder Injection Molding. - 2nd International Conference On Rheology And Modeling Of Materials, Ic-rmm 2015 (journal Of Physics: Conference Series). . |
| Tholibon, D., Sulong, A.b., Ismail, N.f., Tharazi, I., Md Radzi & M.k.f.. (2017). Unidirectional Kenaf Polypropylene Composites: Optimization Process By Two Level Full Factorial. - 1st International Conference On Frontiers Of Composite Materials, Icfcm 2016. . |
| Ukwueze Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad & Zainuddin Sajuri. (2016). Rheological Investigation Of Powder Injection Molding Materials Using Polyethylene With Palm Stearin Binder System. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). . |
| Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Dulina Tholibon, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi & Zakaria Razak. (2016). Tensile Properties Of Unidirectional Kenaf Fibre Reinforced Polylactic-acid Composites. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). . |
| Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana Mohd, Hafizuddin Ab Ghani & Sahrim Ahmad. (2016). Effect Of Uv/o3 Modified Rh On The Tensile Properties Of Rhdpe/rh Composite. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). . |
| Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Izdihar Tharazi & Mohd Khairul Fadzly Md Radzi. (2016). Process Optimization Of Unidirectional Kenaf Polypropylene Composites By Full Factorial Design. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). . |
| Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Khairul Fadzly Md Radzi, Dulina Tholibon, Izdihar Tharazi & Nur Farhani Ismail. (2016). Mechanical Properties Of Injection Moulded For Multi-walled Carbon Nanotube/ Kenaf/ Polypropylene Hybrid Composites. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). . |
| Mohd Khairul Fadzly Md Radzi, Abu Bakar Sulong, Norhamidi Muhamad & Zakaria Razak. (2016). Optimization Of Injection Molding Parameters For Kenaf/pp Composite Using Taguchi Method. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). . |
| Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar & Mohd Yusuf Zakaria. (2016). Powder Injection Molding Of Ti6al4v-w Composite: Rheological Properties. - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (apsim 2016). 13-14. |
| Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif, Mohd Ikram Ramli. (2014). Ha/ti6al4v Powder With Palm Stearin Binder System - Feedstock Characterization. - Applied Mechanics And Materials. 372-375. |
| H. Suherman, J. Sahari, A. B. Sulong, S. Astuti, E. Septe. (2014). Properties Of Epoxy/carbon Black/graphite Composites For Bipolar Plate In Polymer Electrolyte Membrane Fuel Cell. - Advanced Materials Research. 8-12. |
| N.a. Baharuddin, A. Muchtar, A.b. Sulong, H. Abdullah. (2013). Fabrication Methods For Planar Solid Oxide Fuel Cells : A Review. - Advanced Materials Research. . |
| Nurul Akidah Baharuddin, Andanastuti Muchtar, Abu Bakar Sulong & Huda Abdullah. (2013). Effect Of Deposition Time On Lscf-sdc Carbonate Thin Film Formation By The Electrophoretic Deposition Method. - Advanced Materials Research. . |
| Eshkour, Ra; Ariffin, Ak; Zulkifli, R; Sulong, Ab; Azhari, Ch. (2012). The Failure Mode Of Natural Silk Epoxy Triggered Composite Tubes. - 1st International Conference On Mechanical Engineering Research 2011 (icmer);kuantan ( Iop Conference Series-materials Science And Engineering). . |
| Harun, M.r., Muhamad, N., Sulong, A.b., Mohamad Nor, N.h., Jamaludin, K.r.. (2012). Metal Injection Moulding Of Zk60 Magnesium Alloy Powder Using Palm Stearin Based Binder System. - 14th International Conference On Advances In Materials And Processing Technologies, Ampt 2011;istanbul (advanced Materials Research). . |
| Muhammad Ilman Hakimi Chua, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Fazuri Abdullah And Che Hassan Che Haron. (2011). Optimization Of Injection Parameters Using 16mum Stainless Steel Powder (ss316l) At 63 Vol. %, 63.5 Vol. % And 64 Vol. % Powder Loading By Taguchi Method For Metal Injection Molding. - 8th International Conference On Composite Science And Technology, Iccst8; Kuala Lumpur(key Engineering Materials). . |
| Harun, M.r., Muhamad, N., Sulong, A.b., Mohamad Nor, N.h., Jamaludin, K.r.. (2011). The Development Of Metal Injection Moulding For Zk60 Magnesium Alloy Using Palm Stearin Based Binder System. - 2011 International Conference On Frontiers Of Manufacturing Science And Measuring Technology, Icfmm 2011; Chongqing (advanced Materials Research). . |
| Yunn H.s., Muhamad N., Sulong A.b., Fayyaz A., Li H.p.. (2011). Critical Solid Loading And Rheological Study Of Wc-10%co. - 2011 1st International Conference On Mechanical Engineering, Icme 2011; Phuket(applied Mechanics And Materials). . |
| Harun M.r., Muhamad N., Sulong A.b., Nor N.h.m., Ibrahim M.h.i.. (2011). Rheological Investigation Of Zk60 Magnesium Alloy Feedstock For Metal Injection Moulding Using Palm Stearin Based Binder System. - 2010 International Conference On Frontiers Of Manufacturing And Design Science, Icfmd2010; Chongqing (applied Mechanics And Materials). . |
| Ibrahim M.h.i., Muhamad N., Sulong A.b.. (2011). Rheological Characterization Of Water Atomised Stainless Steel Ss316l For Micro Mim. - International Conference On Advances In Materials And Processing Technologies, Ampt 2009 (advanced Materials Research). . |
| Hendra Suherman, Abu Bakar Sulong, Jaafar Sahari. (2011). Electrical Properties Of Carbon Nanotubes-based Epoxy Nanocomposites For High Electrical Conductive Plate. - International Conference On Advances In Materials And Processing Technology (ampt) (advanced Materials Research), Shah Alam, Kuala Lumpur, Malaysia. . |
| Foudzi F.m., Muhamad N., Sulong A.b., Zakaria H.. (2011). Flow Behavior Characteristic For Injection Process Using Nano-yttria Stabilized Zirconia For Micro Metal Injection Molding (μmim). - 2010 International Conference On Frontiers Of Manufacturing And Design Science, Icfmd2010; Chongqing (applied Mechanics And Materials). . |
| Iswandi, Sahari, J., Sulong, A.b.. (2011). Effects Of Different Particles Sizes Of Graphite On The Engineering Properties Of Graphites/polypropylene Composites On Injection Molding Aplication. - 8th International Conference On Composite Science And Technology, Iccst8 (key Engineering Materials); Kuala Lumpur. . |
| Ramli, I.s., Arshad, H., Sulong, A.b., Yahaya, N.h.mohd., Che Haron, C.h.. (2011). Enhancing Learning Experience Of Novice Surgeon With Virtual Training System For Jig And Fixture Usage. - 2nd International Visual Informatics Conference, Ivic 2011; Selangor (lecture Notes In Computer Science). . |
| Muhammed Ali, S.a., Muchtar, A., Muhamad, N., Sulong, A.b.. (2011). A Review On Preparation Of Sdc-carbonate As Composite Electrolyte Material For Intermediate Temperature Solid Oxide Fuel Cells (it-sofc). - 2011 Ieee 1st Conference On Clean Energy And Technology, Cet 2011; Kuala Lumpur. . |
| Ibrahim M.h.i., Muhamad N., Sulong A.b., Jamaludin K.r., Nor N.h.m., Ahmad S.. (2011). Optimization Of Micro Metal Injection Molding Ss 316l For The Highest Green Strength By Using Taguchi Method. - International Conference On Advances In Materials And Processing Technologies, Ampt 2009(advanced Materials Research). . |
| Suherman H., Sahari J., Sulong A.b.. (2011). Optimization Mixing Parameters On The Electrical Conductivity Of Polymer Nanocomposites Based On The Taguchi Method. - 2011 1st International Conference On Mechanical Engineering, Icme 2011; Phuket(applied Mechanics And Materials). . |
| Siti Saniah Ab. Karim, Abu Bakar Sulong, Che Husna Azhari, Ng Min Hwei And Mohd Reusmaazran Yusof. (2011). Influence Of Polyacrilonitrile (pan) Concentration On The Mechanical And Physical Properties Of Electrospun Fibres. - Key Engineering Materials. . |
| Mohd Fazuri Abdullah, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Ilman Hakimi Chua Abdullah, Nor Hamdan Nor Yahya. (2011). Comparison On Rheology Properties Of Polypropylene And Polyethylene As Binder System With Stainless Steel 316l For Metal Injection Moding. - Key Engineering Materials. . |
| Abu Bakar Sulong, Abdullah Atiq Ariffin, Jaafar Sahari, And Hendra Suherman. (2011). Analysis Of Energy Absorption On Pultruded Composite Tube Under Oblique Loading. - 8th International Conference On Composite Science And Technology Location: Kuala Lumpur, Malaysia (key Engineering Materials). . |
| R. Nishata Royan, Abu Bakar Sulong, Jaafar Sahari. (2011). Effect Of Loading Concentration On The Electrical And Hardness Properties Of Mwcnt/epoxy Nanocomposites. - Key Engineering Materials. . |
|
R. Nishata Royan, Abu Bakar Sulong, Hendra Suherman And jaafar Sahari. (2011). Effect Of Wet Oxidation On The Dispersion And Electrical Properties Of Multi-walled Carbon Nanotubes /epoxy Nanocomposites. - 8th International Conference On Composite Science And Technology, Iccst8 (key Engineering Materials); Kuala Lumpur. . |
| Li H.p., Muhamad N., Sulong A.b., Yunn H.s., Abolhasani H.. (2011). Application Of Taguchi Method For Parameters Optimization In Micro Metal Injection Molding. - 2011 1st International Conference On Mechanical Engineering, Icme 2011; Phuket; 3 April 2011 Through 4 April 2011 (applied Mechanics And Materials). . |
| Mohd Fazuri Abdullah, Abu Bakar Sulong, Ilman Hakimi Chua, Che Hassan Che Haron, Jaharah A. Ghani. (2010). Effects Of Insert Nose Radius And Machining Parameters On The Surface Roughness Of Stainless Steel 316l. - Key Engineering Materials. . |
| Abu Bakar Sulong, Muhammad Ilman Hakimi, Mohd Fazuri Abdullah, San Wei Koon, Nor Hamdan Nor Yahya, Rizauddin Ramli. (2010). Design Approach For Jig In Computer Assisted Total Knee Replacement Surgery. - Key Engineering Materials. . |
| Mohd Halim Irwan Ibrahim, Norhamidi Muhamad, Abu Bakar Sulong, Khairur Rijal Jamaludin, Nor Hafiez Mohamad Nor, Sufizar Ahmad, Mohd Ruzi Harun And Hafizawati Zakaria. (2010). Parameter Optimization Towards Highest Micro Mim Density By Using Taguchi Method. - Key Engineering Materials. . |
| Abu Bakar Sulong, Gan Tek Keong, Jaafar Sahari. (2010). Effects Of Molding Parameters And Addition Of Fillers On Gate Chip. - Key Engineering Materials. . |
| Intan Syaheera Ramli, Haslina Arshad, Nor Hamdan Mohd Yahaya, Abu Bakar Sulong. (2010). Development Of Visualization Application (vjbk) For Newly Designed Jig And Fixture For Computer-assisted Knee Replacement Surgery. - Business Transformation Through Innovation And Knowledge Management: An Academic Perspective, Istanbul Turkey. . |
| Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong. (2010). Electrical Conductivity And Micro Hardness Of Synthetic And Natural. - Key Engineering Materials. . |
| Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong And Nishata Royan. (2010). Electrical Conductivity And Flexural Strength Of Graphite/carbon Nanotubes/epoxy Nanocomposites. - Key Engineering Materials. . |
| Intan Syaherra Ramli, Haslina Arshad, Abu Bakar Sulong, Nor Hamdan Mohd Yahaya, And Che Hassan Che Haron. (2009). Visualization Of The Newly Designed Jig And Fixture For Computer-assisted Knee Replacement Surgery. - Lecture Notes In Computer Science. . |
| Abu Bakar Sulong, Angela Ng Min Hwei Ng, Muhammad Azmi Abdul Hamid. (2021). Metal-ceramic Composite: A New Generation Material For Medical Implant. - . 135. |
| Nabilah Afiqah Mohd. Radzuan, Abu Bakar Sulong, Mohd. Yusuf Zakaria. (2021). Komposit Polimer Pengalir Revolusi Teknologi Pembuatan. - . 218. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong. (2021). Seramik Nano: Revolusi Produk Mikro. - . 173. |
| Nor Kamaliana Khamis, Mohd Faizal Mat Tahir, Abu Bakar Sulong, Zulkhairi Zainal Abidin, Intan Fadhlina Mohamad. (2020). Teori Dan Inovasi Pengajaran Dan Pembelajaran: Menyusuri Pandemik Covid-19. - . 10. |
| Majid Niaz Akhtar, Abu Bakar Sulong, Muhammad Shahid Nazir, Khaliq Majeed, Mohd. Khairul Fadzly Radzi, Nur Farhani Ismail & Muhammad Rafi Raza. (2017). Green Biocomposites Manufacturing And Properties. - . 409. |
| Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli. (2017). Advances In Material Processing & Integrity - Non Metals And Hybrids. - . 215. |
| Nor Kamaliana Khamis, Mohd Faizal Mat Tahir, Abu Bakar Sulong, Zulkhairi Zainal Abidin, Intan Fadhlina Mohamad. (2020). Teori Dan Inovasi Pengajaran Dan Pembelajaran: Menyusuri Pandemik Covid-19. - . 10. |
| A.b. Sulong, M.n. Akhtar, S. Ab. Karim & C.h. Azhari. (2017). Advances In Materials Processing And Integrity Non-metals And Hybrids. - . 14. |
| Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli. (2017). Advances In Materials Processing And Integrity Non-metals And Hybrids. - . 7. |
| Majid Niaz Akhtar, Abu Bakar Sulong, Muhammad Shahid Nazir, Khaliq Majeed, Mohd. Khairul Fadzly Radzi, Nur Farhani Ismail & Muhammad Rafi Raza. (2017). Green Biocomposites Manufacturing And Properties. - . 409. |
| Abu Bakar Sulong, Angela Ng Min Hwei Ng, Muhammad Azmi Abdul Hamid. (2021). Metal-ceramic Composite: A New Generation Material For Medical Implant. - . 135. |
| Farhana Mohd Foudzi, Norhamidi Muhamad, Abu Bakar Sulong. (2021). Seramik Nano: Revolusi Produk Mikro. - . 173. |
| Nabilah Afiqah Mohd. Radzuan, Abu Bakar Sulong, Mohd. Yusuf Zakaria. (2021). Komposit Polimer Pengalir Revolusi Teknologi Pembuatan. - . 218. |
| Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli. (2017). Advances In Material Processing & Integrity - Non Metals And Hybrids. - . 215. |
| Che Husna Azhari, Abu Bakar Sulong & Rozli Zulkifli. (2017). Advances In Materials : Processing And Integrity Non Metals And Hybrids. - . 215. |
| Che Husna Azhari, Abu Bakar Sulong, Rozli Zulkifli. (2017). Advances In Materials Processing And Integrity Non Metals And Hybrids. - . 177. |
| Nabilah Afiqah Binti Mohd Radzuan;norhamidi Bin Muhamad;abu Bakar Bin Sulong;zaliha Binti Wahid;farhana Binti Mohd Foudzi. (2024). Mechanism Of Anticipating Diffusion And Delamination On Fibre Oriented Additive Manufactured Polyamide/carbon Fibre Composite Filament. - . . |
| Norhamidi Bin Muhamad;che Hassan Bin Che Haron;abu Bakar Bin Sulong;nashrah Hani Binti Jamadon;farhana Binti Mohd Foudzi;nabilah Afiqah Binti Mohd Radzuan. (2024). Investigation Of Sintering Mechanism Of Yttria-stabilized Zirconia And Hydroxyapatite Bi-material Micro-components Produced By Two-component Micro-powder Injection Moulding. - . . |
| Prof. Ir. Dr. Abu Bakar Sulong, Rohazaini Hasan, Prof. Dr. Mohd Talib Latif, Prof. Madya Dr. Hamidun Bunawan, Prof. Madya Dr. Azlan Abas, Dr. Ahmad Aldrie Amir, Dr. Mohamad Taha Ijab, Dr. Umi Azmah Hasran, Mohammad Shafiq Bin Rahmat, Mohd Syukri Ismail. (2023). Impak: Kluster Penyelidikan Sumber Lestari, Alam Sekitar Dan Kehidupan Pintar. - Impak: Kluster Penyelidikan Sumber Lestari, Alam Sekitar Dan Kehidupan Pintar. 1-52. |
| Abu Bakar Bin Sulong;muhammad Azmi Bin Abdul Hamid;ng Min Hwei;farah `atiqah Binti Abdul Azam. (2023). A New Generation Of Titanium/hydroxyapatite/wollastonite Biocomposite Material For Orthopaedic Implant. - . . |
| Nabilah Afiqah Binti Mohd Radzuan;norhamidi Bin Muhamad;abu Bakar Bin Sulong;farhana Binti Mohd Foudzi. (2023). Bonding Of Polyamide Reinforced Carbon Fibre Via Additive Manufacturing. - . . |
| Abu Bakar Bin Sulong;rosiah Binti Rohani;farhana Binti Mohd Foudzi;nabilah Afiqah Binti Mohd Radzuan. (2023). Radiation-induced Grafting Of Electrospun Nanofiber Based Functionalized Natural Rubber For Membrane Application. - . . |
| Nurul Syazwani Sahari, Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Nishata Royan A/p Rajendran Royan. (2023). Rheology Properties In Composite Filament Making. - 8th International Conference On Fuel Cell & Hydrogen Technology 3rd Symposium On Fuel Cell And Hydrogen Technology 2023 (icfcht Sfcht 2023). 05. |
| Zaliha Wahid, Nabilah Afiqah Mohd Radzuan, Nurhasyimah Abd Aziz, Afifah Zakiyyah Juri , Abu Bakar Sulong. (2023). On Mechanical Performance Of 3d Printed Wood Mimic Materials. - 7th Powder Metallurgy And Advanced Processes & Systems In Manufacturing 2023 (pm7&apsim2023). 1-9. |
| Mohd. Zaidi Bin Omar;abu Bakar Bin Sulong;zainuddin Bin Sajuri;intan Fadhlina Binti Mohamed. (2023). Mechanical Properties And Microstructural Evolution Of Thixoformed Graphene Nanosheets Reinforced Aluminium Alloy Matrix Composites. - . . |
| Nurul Syazwani Sahari, Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong. (2023). Rheology Properties In Polyamide Reinforced Carbon Fibre Composite. - International Conferences On Powder Metallurgy And Advanced Processes & Systems In Manufacturing (pm7 & Apsim2023). 1-3. |
| Abu Bakar Bin Sulong;norhamidi Bin Muhamad;mohd. Zaidi Bin Omar;zainuddin Bin Sajuri;nabilah Afiqah Binti Mohd Radzuan;mohd Ikram Bin Ramli. (2023). Mechanism In Processability Of Copper-aluminium-manganese Shape Memory Alloys (smas) Through Powder Injection Moulding (pim). - . . |
| Norazyan Rudi Hartono, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong. (2023). Carbon Fibre Reinforced Polyamides In High-temperature Via 3d Printing. - Malaysia Polymer International Conference 2023. 20. |
| Intan Fadhlina Binti Mohamed;ahmad Kamal Ariffin Bin Mohd Ihsan;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;wan Fathul Hakim Bin W. Zamri. (2022). Extra Superplasticity Of Aa2618 Alloy Processed By High-pressure Torsion. - . . |
| Umi Azmah Binti Hasran;mohd. Ambar Bin Yarmo;masli Irwan Bin Rosli;abu Bakar Bin Sulong;t. Husaini. (2022). Pencirian Dan Ketersauran Sel Fuel Mikro Berprestasi Tinggi Sebagai Sumber Kuasa Bersih Untuk Pesaudara Tanpa Pemandu (uav) Di Ruang Udara Malaysia. - . . |
| Farhana Binti Mohd Foudzi;norhamidi Bin Muhamad;abu Bakar Bin Sulong. (2022). Effect Of Heat Treatment On The Performance Of Additive Manufactured Titanium Alloy Via Selective Laser Melting. - . . |
| Abu Bakar Sulong, Norfilza Mohd Mokhtar, Mohamad Nasir Sahfiee, Yap Wei Boon, Caryn Chan Mei Hsein, Mohd Kaisan Mahadi, Mohamad Aimanuddin Mohtar. (2022). Impak: Kluster Kesihatan & Perubatan Termaju. - Impak: Kluster Kesihatan & Perubatan Termaju. 1-44. |
| Norhamidi Bin Muhamad;che Hassan Bin Che Haron;ahmad Kamal Ariffin Bin Mohd Ihsan;jaharah Bt. A Ghani;abu Bakar Bin Sulong. (2022). Parameter Study Of Metal Injection Moulding And Machining Of Titanum Alloy. - . . |
| Norhamidi Bin Muhamad;mohd. Zaidi Bin Omar;abu Bakar Bin Sulong;nashrah Hani Binti Jamadon;farhana Binti Mohd Foudzi. (2022). Effect Of Metal-ceramic (bi-material) On Inter-surface Bonding By Micro Co-powder Injection Molding. - . . |
| Nor Yuliana Binti Yuhana;sahrim Bin Hj. Ahmad;abu Bakar Bin Sulong;nur Hidayatul Nazirah Binti Kamarudin. (2022). The Role And Mechanism Of Non-reactive Organics Acids As Recycled E-waste Particles Surface Modifier . - . . |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Norhamidi Muhamad. (2022). Layup Sequence And Interfacial Bonding Of Additively Manufactured Polymeric Composite. - 6th Postgraduate Colloquium For Environmental Research 2022 (pocer 2022). 16-17. |
| Nashrah Hani Binti Jamadon;abu Bakar Bin Sulong;mohd Hamdi Bin Abd Shukor. (2022). Potential Use Of Copper-phosphorus Based Filler For Joining Porous Metal To Copper Alloy Via Brazing Process. - . . |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong And Mohammad Ashraf Mohammad Amin. (2021). 3d Printed Polyamide-carbon Fibre Composites Filament. - 8th International Conference On Solid State Science And Technology (8th Icssst 2021). 117. |
| Abu Bakar Bin Sulong;che Hassan Bin Che Haron;norhamidi Bin Muhamad;nabilah Afiqah Binti Mohd Radzuan. (2021). Kesan Penambahan Bahan Nano Terhadap Ketahanan Mekanikal Dan Fizikal Kenaf Polimer Komposit Bagi Aplikasi Automotif. - . . |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi. (2021). Conductive Polymer Composites Using 3d Printing For Electronic Devices: A Review. - International Conference On Manufacturing Engineering Technology (iconmet). 94. |
| Nor Yuliana Binti Yuhana;abu Bakar Bin Sulong. (2021). Penambahbaikan Sifat Mudah Dibiodegradasi, Ketahanan Haba, Mekanikal Dan Rintangan Pelarut Bahan Poliuretena Sebagai Alat Pencuci Paip Industri. - . . |
| Norhamidi Bin Muhamad;abu Bakar Bin Sulong;zainuddin Bin Sajuri;zaliha Binti Wahid;intan Fadhlina Binti Mohamed;farhana Binti Mohd Foudzi. (2020). Magnetic – Non-magenetic Layered Bi-material Through Co-powder Injection Moulding (co-pim). - . . |
| Nor Kamaliana Khamis, Abu Bakar Sulong, Zulkhairi Zainal Abidin, Intan Fadhlina Mohamad, Mohd Faizal Mat Tahir. (2020). Perbandingan Kompetensi Dalam Akademik Dan Prestasi Dalam Projek Berkumpulan: Satu Kajian Kes. - K-novasi 2020. 1-13. |
| Roslinda Binti Shamsudin;muhammad Azmi Bin Abdul Hamid;zalita Binti Zainuddin;abu Bakar Bin Sulong;ng Min Hwei. (2020). Tajuk Program: Metal-ceramic Composite: A New Generation Material For Bone Implant Tajuk Projek: A Study On The Role And Mechanism Of Argentum And Superparamagnetic Material In The Prperties Of Wolla. - . . |
| Zainuddin Bin Sajuri;che Husna Bt. Azhari;andanastuti Muchtar;rozli Bin Zulkifli;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;intan Fadhlina Binti Mohamed. (2020). Development Of Light Weight Materials For Ballistic Applications In Tropical Climates. - . . |
| Abu Bakar Bin Sulong;norhamidi Bin Muhamad;andanastuti Muchtar;roslinda Binti Shamsudin;ng Min Hwei. (2020). Tajuk Program: Metal-ceramic Composite: A New Generation Material For Bone Implant Tajuk Projek: Effect Of Processing Parameters On Novel Metal-ceramic Composite Through Powder Injection Molding. - . . |
| Masli Irwan Bin Rosli;wan Ramli Bin Wan Daud;mohd Shahbudin Bin Mastar @ Masdar;abu Bakar Bin Sulong;nur Tantiyani Binti Ali Othman;t. Husaini. (2019). The Investigation Of Fluid Behaviour Effects In High Temperature Proton Exchange Membrane Fuel Cell. - . 1-5. |
| Abu Bakar Bin Sulong;masli Irwan Bin Rosli;edy Herianto;t. Husaini. (2019). Reka Bentuk Dan Pengujian Prestasi Sel Tunggal Sel Fuel Membran Elektrolit Polimer Suhu Tinggi (ht-pemfc). - . 1-8. |
| T. Husaini;masli Irwan Bin Rosli;abu Bakar Bin Sulong;edy Herianto. (2019). Plat Dwikutub Ketumpatan Kuasa Tinggi Untuk Sel Fuel Dan Sel Elektrolisis. - . . |
| Norhamidi Bin Muhamad;abu Bakar Bin Sulong;zaliha Binti Wahid. (2019). Advanced Copper/graphene Composite For Thermal Management Application Using A Sustainable Powder Injection Moulding Process. - . . |
| Lohashenpahan Shanmuganantha 1 , Roslinda Shamsudin 3 ,abu Bakar Sulong 2 ,min Hwei Ng. (2019). Titanium Wollastonite: An Implant For The Future Of Tissue Engineering. - Termsympo 2019. 1. |
| Che Hassan Bin Che Haron;ja`afar Bin Sahari @ Shaari;che Husna Bt. Azhari;norhamidi Bin Muhamad;jaharah Bt. A Ghani;abu Bakar Bin Sulong. (2018). Machinability And Moldability Of High Strenght Kenaf Polymer Matrix Composites. - . . |
| Abu Bakar Bin Sulong;norhamidi Bin Muhamad;andanastuti Muchtar;syarif Junaidi Bin Sjarifuddin Djalil. (2018). Powder Co-injection Molding (2c-pim) Of Hybrid Metal-ceramic Powders. - . . |
| Andanastuti Muchtar;abu Bakar Bin Sulong;syarif Junaidi Bin Sjarifuddin Djalil;mahendra Rao A/l Somalu;edy Herianto. (2018). Development Of Screen-printed Ni-sdcc Composite Anode Thin Film For Micro-solid Oxide Fuel Cell. - . . |
| Abu Bakar Sulong. (2018). Unidirectional Kenaf Fiber Reinforced Polyactic-acid Composites For Automotive Interior Component Application. - Majalah Innovate. 25-26. |
| Abu Bakar Sulong. (2018). Komposit Logam-seramik: Bahan Generasi Baru Untuk Implan Perubatan. - Impak Oktober 2018. . |
| Nabilah Afiqah Mohd Radzuan, Mohd Yusuf Zakaria, Abu Bakar Sulong. (2018). Komposit Polimer Sebagai Suatu Teknologi Hijau. - Impak Oktober 2018. . |
| Abu Bakar Sulong. (2018). Two Component Powder Injection Molding (2c-pim) Of Stainless Steel (ss17-4ph) And Yttria Stabilised Zirconia (3ysz). - Majalah Innovate. 27-28. |
| Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Wan Ramli Wan Daud, Edy Herianto Majlan & Bushroa Abdul Razak. (2017). Anticorrosion And Electrical Conductivity Of Sus 316l Plates With Cr As Surface Modification For Bipolar Plates Potential At Anode/cathode In Pemfc. - 6th International Conference On Fuel Cell & Hydrogen Technology 2017 (icfcht2017). . |
| R.e. Rosli, A.b. Sulong,w.r.w. Daud, M.a. Zulkifley, T. Husaini, M.i. Rosli, E.h. Majlan & M.a. Haque. (2017). Design And Development Of Ht-pemfc Test Cell And Test Station. - 6th International Conference On Fuel Cell & Hydrogen Technology 2017 (icfcht2017). . |
| Ahmad Tajuddin, Teuku Husaini, Edy Herianto Majlan, Wan Ramli Wan Daud & Abu Bakar Sulong. (2017). Effect Of Assembly Pressure On The Performance Of Full Stack Pemfc: A Review On The Recent Development Of Modeling And Experimental Research. - 6th International Conference On Fuel Cell & Hydrogen Technology 2017 (icfcht2017). . |
| Iswandi, Abu Bakarsulong & Teuku Husaini. (2017). Effect Of G/pp Cpc On Electtrical Conductivity Properties At Manufacturing Of Bipolar Plate. - 6th International Conference On Fuel Cell & Hydrogen Technology (icfcht2017). . |
| Lohashenpahan Shanmuganatha, Angela Ng Min Hwei, Abu Bakar Sulong, Roslinda Shamsudin. (2016). A Novel Approach To Optimize The Fabrication Of Metal-ceramic Scaffold And Its Regulation On Msc Cell Behaviour On Molecular Level For Tissue Engineering Application. - 6th Malaysian Tissue Engineering And Regenerative Medicine Scientific Meeting Mterms 2016 In Conjunction With 2nd Malaysian Stem Cell Meeting. . |
| T. Husaini, Nur Fawwaz Asri, Abu Bakar Sulong, Wan Ramli Wan Daud And Edy Herianto Majlan. (2015). Coating Of Metal Bipolar Plates For Anticorrosion In Pemfc: A Review. - The 5th International Conference On Fuel Cell And Hydrogen Technology (icfcht2015). . |
| Andanastuti Muchtar, Mariyam Jameelah Binti Ghazali, Abu Bakar Bin Sulong. (2015). Translucency And Improved Fracture Toughness Of Nanocrystalline Oxide Ceramics By Morphology Control. - . . |
| R.e.rosli, A.b.sulong, W.r.w.daud, M.a.zulkifley, Masli I.rosli, M.ahsanul Haque.. (2015). Overview Of High Temperature Proton Exchange Membrane Fuel Cell System. - The 5th International Conference On Fuel Cell And Hydrogen Technology (icfcht2015). . |
| M. Ahsanul Haque, A. Bakar Sulong, L. Kee. Shyuan, E. Herianto. Majlan, T. Husaini, R. E. Rosli.. (2015). A Review On Acid Doped Polybenzimidazoles/platinum Membrane Electrode Assembly For High Temperature Proton Exchange Membrane Fuel Cell. - The 5th International Conference On Fuel Cell And Hydrogen Technology (icfcht2015). . |
| Abu Bakar Bin Sulong, Norhamidi Bin Muhamad, Syarif Junaidi Bin Sjarifuddin Djalil. (2015). Novel Porous Composite (titanium-hydroxyapatite): Effect Of Powder Injection Molding Process Parameters On Its Formability. - . . |
| Ja`afar Bin Sahari @ Shaari, Abu Bakar Bin Sulong. (2014). Electrically Conducting Polymer Composites For Fuel Cell Bipolar Plate. - . . |
| Wan Fathul Hakim W. Zamri, Abu Bakar Sulong,rizauddin Ramli, Nor Kamaliana Khamis, Hawa Hishamuddin, Shahrum Abdullah. (2014). Maklumbalas Alumni Terhadap Keberkesanan Program Kejuruteraan Pembuatan Di Ukm. - Seminar Pendidikan Kejuruteraan Dan Alam Bina (peka 2013). . |
| Nor Kamaliana Khamis, Zambri Harun, Mohd Faizal Mat Tahir, Zaliha Wahid, Mohd Anas Mohd Sabri, Ahmad Kamal Ariffin Mohd Ihsan, Shahrum Abdullah, Abu Bakar Sulong Dan Nizaroyani Saibani. (2012). Faktor Motivasi Dan Kekangan Memohon Jurutera Professional Di Kalangan Ahli Akademik : Satu Kajian Empirikal. - Kongres Pengajaran & Pembelajaran Ukm 2012. . |
| Mohd Anas M.s., Abu Bakar S. , Fung Kuon C. & Jaafar S.. (2011). Phenomenon Of Corrosion In Metallic Bipolar Plate In Electrolyte Proton Exchange Membran Fuel Cell. - Advanced Processes System In Manufacturing (apsim2011). . |
| R A Eshkour, A K Ariffin, R Zulkifli, A B Sulong And C H Azhari. (2011). The Failure Mode Of Natural Silk Epoxy Triggered Composite Tubes. - 1st International Conference In Mechanical Engineering Research (icmer) 2011. . |
| Hendra Suherman, Abu Bakar Sulong & Jaafar Sahari. (2010). Electrical Conductivity And Micro Hardness Of Synthetic And Natural Graphite Epoxy Composite. - Abstrak Pascasidang Bengkel Penulisan Manuskrip Jurnal & Tesis 2010. . |
| Iswandi, Jaafar Sahari & Abu Bakar Sulong. (2010). Review Of Bipolar Plates Manufacturing In Pem Fuel Cells : Parameter Injection Molding Process. - Abstrak Pascasidang Bengkel Penulisan Manuskrip Jurnal & Tesis 2010. . |
| Nishata Royan A/p Rajendran Royan, Abu Bakar Sulong & Jaafar Sahari. (2010). An Overview Of Chemical Functionalized Cnts On The Electrical Conductivity Of A Nanocomposite. - Abstrak Pascasidang Bengkel Penulisan Manuskrip Jurnal & Tesis 2010. . |
| Hendra Suherman, Abu Bakar Sulong And Jaafar Sahari. (2009). Influence Of Cnts Addition On Electrical And Hardness Properties Of The Cnts/epoxy Nanocomposites. - Buku Abstrak Pascasidang Bengkel Penulisan Manuskrip Jurnal Dan Tesis, 18-19 April 2009, Residence Hotel, Uniten. . |
| Hendra Suherman, Abu Bakar Sulong, Jaafar Sahari. (2009). Effect Of Filler Loading On Electrical Conductivity Cnts/epoxy Nanocomposites. - 4th International Conference On Recent Advances In Materials, Minerals And Environment And 2nd Asian Symposium On Material And Processing (ramm & Asmp 2009) 1-3 June, Penang-malaysia.. . |
| Iswandi, Jaafar Sahari, Abu Bakar Sulong. (2009). Review Of Effect Of Polymer Binder Properties To The Shrinkage And Warpage Manufacturing Bipolar Plate Using Injection Molding Process. - Buku Abstrak Pascasidang Bengkel Penulisan Manuskrip Jurnal Dan Tesis, 18-19 April 2009, Residence Hotel, Uniten. . |
| Prototype Development and Field Testing of Stainless Steel-Zirconia (bi-material) Guide Pin for Spot Welding fabricated via Two-Component Powder Injection Moulding , Ketua Projek , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
| Elucidation of bonding mechanism of bi-modal (nano and micro-sized particles) stainless steel 316L and yttria-stabilized zirconia through two component bi-material micro-powder injection moulding (2C-2M-µPIM) , Ketua Projek , 23-01-2024 sehingga 22-01-2025 , Universiti |
| Elucidation of Mechanism in Balance of Plant Management and Fluid Transport to improve the efficiency of Anion Exchange Membrane Water Electrolyser (AEMWE) , Ketua Projek , 01-12-2022 sehingga 30-11-2025 , Kebangsaan |
| Recovery of Phase Transformation Mechanism Changes in Copper-Aluminum-Manganese Shape Memory Alloys (SMAs) Processed by Powder Injection Molding (PIM) , Ketua Projek , 07-09-2021 sehingga 06-03-2025 , Kebangsaan |
| AB5-type Hydrogen Storage Alloys for High-Selectivity Hydrogen Recovery from Pyrolysis Off-Gas , Penyelidik Bersama , 01-11-2024 sehingga 31-10-2026 , Universiti |
| Development of selective laser melting (SLM) parameters for enhanced shape memory behavior of 4D printed nickel titanium (NiTi) alloys , Penyelidik Bersama , 01-11-2024 sehingga 31-10-2026 , Antarabangsa |
| Investigating the Impact of Electronegative Functional Groups in Chitosan Derivatives on Antifouling Properties of Ceramic Membranes for Seawater Desalination , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2027 , Kebangsaan |
| Interfacial bonding and deformation mechanism between core and face panel of 3D printed lattice carbon fibre containing polylactic acid , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2027 , Kebangsaan |
| Shear-thinning Behaviour in Rheology Properties of Yttria-stabilised Zirconia (YSZ) for High Dense Monolithic Ceramic Layer via Direct Ink Writing (DIW) , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2027 , Kebangsaan |
| Mechanical and electrochemical corrosion behavior of economical austenitic stainless-steel implant through coupled cryogenic machining and silver-tantalum oxide coating , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
| Elucidating incompatibilities of Ceramic Injection Molding (CIM) feedstock in Ceramic Fused Filament Fabrication (CF3): Discovering Processing Environment Discrepancies , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
| Printability, interface bonding strength and heat treatment analysis on metals with thermal profiles` differences via multi-material additive manufacturing (MMAM) using Laser Powder Bed Fusion (LPBF) method , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2026 , Kebangsaan |
| Formulating Damage Mechanics Behaviour of Additively Manufactured Aluminium Alloy Associated to Machine Learning Data Analytics , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2026 , Kebangsaan |
| Reduced Graphene Oxide/Polyaniline Polymer Matrix with Enhanced Electrical Conductivity , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2025 , Universiti |
| Nano-mechanical Characterization of Bi-material Steel-Zirconia Micro-Components Produced by Micro Co-Powder Injection Molding , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2025 , Universiti |
| Non-auxetic negative indexed biocompatible metamaterial structure for biosensing , Penyelidik Bersama , 01-09-2022 sehingga 31-08-2025 , Kebangsaan |
| Elucidating on the Bonding Mechanism of Zirconia/Hydroxyapatite Bi-Material Formed by Two-Component Micro-Powder Injection Moulding Process , Penyelidik Bersama , 07-09-2021 sehingga 06-03-2025 , Kebangsaan |
| Next Generation Water Electrolysis for Green and Sustainable Hydrogen Production (NexGH2): Towards Net-Zero Carbon Steel and Iron Industry , Ketua Program , 01-12-2022 sehingga 30-11-2025 , Kebangsaan |
| A New Generation of Titanium/hydroxyapatite/wollastonite Biocomposite Material for Orthopaedic Implant , Ketua Projek , 17-08-2020 sehingga 16-02-2021 , Universiti |
| Mechanism in Processability of Copper-Aluminium-Manganese Shape Memory Alloys (SMAs) Through Powder Injection Moulding (PIM) , Ketua Projek , 01-08-2020 sehingga 31-01-2023 , Universiti |
| Radiation-Induced Grafting Of Electrospun Nanofiber Based Functionalized Natural Rubber for Membrane Application , Ketua Projek , 01-10-2019 sehingga 30-09-2022 , Universiti |
| KESAN PENAMBAHAN BAHAN NANO TERHADAP KETAHANAN MEKANIKAL DAN FIZIKAL KENAF POLIMER KOMPOSIT BAGI APLIKASI AUTOMOTIF , Ketua Projek , 03-06-2019 sehingga 02-12-2020 , Universiti |
| Development of Fixator Screw and Plate (Orthopedic Implant) using Novel Material of Composite Through Powder Injection Molding , Ketua Projek , 01-02-2018 sehingga 31-01-2021 , Universiti |
| Reka bentuk Dan Pengujian Prestasi Sel Tunggal Sel Fuel Membran Elektrolit Polimer Suhu Tinggi (HT-PEMFC) , Ketua Projek , 01-01-2018 sehingga 30-06-2019 , Universiti |
| Effect of repeated heating on powder metallurgy of additive manufactured titanium alloy through selective laser melting , Ketua Projek , 16-10-2017 sehingga 15-07-2020 , Universiti |
| Prototype Development and Animal (Pre-Clinical) Study of Titanium Alloy/Hydroxyapatite Fixator Screw using Novel Material of Composite through Powder Injection Molding for Orthopaedic Implant , Ketua Projek , 15-08-2017 sehingga 14-11-2020 , Kebangsaan |
| Countermeasures in Strain Mismatch of Ceramic-Ceramic via Micro Co-Powder Injection Molding (μ-CoPIM) , Ketua Projek , 15-08-2017 sehingga 14-01-2020 , Kebangsaan |
| Tajuk Program: Metal-Ceramic Composite: A New Generation Material for Bone Implant Tajuk Projek: Effect of Processing Parameters on Novel Metal-Ceramic Composite through Powder Injection Molding , Ketua Projek , 01-02-2015 sehingga 31-01-2019 , Kebangsaan |
| Effect of Processing Parameters on Forming of Novel Porous Metal-Ceramic Composite Through Powder Injection Molding , Ketua Projek , 01-08-2014 sehingga 31-07-2017 , Kebangsaan |
| Powder co-injection molding (2C-PIM) of hybrid metal-ceramic powders , Ketua Projek , 16-12-2013 sehingga 31-05-2017 , Kebangsaan |
| INNOVATIVE SYSTEM FOR EFFICIENT RENEWABLE ENERGY DEVICE , Ketua Projek , 01-11-2013 sehingga 31-10-2016 , Universiti |
| Tuning of Programme Outcomes Based on Stakeholders` input , Ketua Projek , 01-07-2013 sehingga 31-12-2014 , Universiti |
| The roles of binder and filler characteristics on the achievement of high electrical conductivity and mechanical integrity in conductive polymer composites , Ketua Projek , 01-01-2013 sehingga 30-09-2016 , Kebangsaan |
| Novel Porous Composite (Titanium-Hydroxyapatite): Effect of Powder Injection Molding Process Parameters on Its Formability , Ketua Projek , 01-06-2012 sehingga 31-05-2015 , Kebangsaan |
| Pembangunan Kurikulum Berdasarkan Kaedah Penilaian Gambar Besar , Ketua Projek , 01-06-2012 sehingga 01-09-2013 , Universiti |
| Pengukuran dan Penilaian Secara Langsung Bagi Hasil Program (PO) dan Hasil Kursus (CO): Kesan Terhadap Penambahbaikan Berterusan , Ketua Projek , 01-06-2012 sehingga 31-08-2013 , Universiti |
| Effect of Metal Injection Molding (MIM) Processing Parameters on the Intra Networking Phase of Novel Hybrid Materials , Ketua Projek , 06-06-2011 sehingga 05-12-2013 , Kebangsaan |
| A Novel process of Incorporating Chemical Surface Modified Stainless Steel/Carbon nanotubes in polymer Matrix Composites , Ketua Projek , 01-06-2010 sehingga 31-12-2012 , Universiti |
| Development of A Novel Method to Produce Polymer Fiber Using Electrospinning , Ketua Projek , 01-11-2009 sehingga 30-04-2012 , Kebangsaan |
| Rekabentuk, Pembangunan dan Fabrikasi Jig untuk Pembedahan Lutut , Ketua Projek , 01-06-2008 sehingga 31-05-2012 , Universiti |
| Investigation of sintering mechanism of yttria-stabilized zirconia and hydroxyapatite bi-material micro-components produced by two-component micro-powder injection moulding , Penyelidik Bersama , 19-01-2023 sehingga 18-01-2024 , Universiti |
| Mechanism to induce thermal stimuli response of 4D printed polylactic acid reinforced graphene nanoplatelets , Penyelidik Bersama , 01-10-2022 sehingga 30-09-2024 , Universiti |
| Solute-dislocation interaction in altering slip-plane activation at high temperature operation by severe plastic deformation process , Penyelidik Bersama , 01-10-2022 sehingga 30-09-2024 , Universiti |
| Printability and Performance of Two Different Metals 3D Printed in A Single Part , Penyelidik Bersama , 01-09-2021 sehingga 29-02-2024 , Universiti |
| Necking Evolution and Grain Boundary Diffusion of Laser Sintered 316L Stainless Steel Particles: The Underlying Phenomena in Metal Additive Manufacturing , Penyelidik Bersama , 01-11-2020 sehingga 31-10-2023 , Kebangsaan |
| Mechanism of anticipating diffusion and delamination on fibre oriented additive manufactured polyamide/carbon fibre composite filament , Penyelidik Bersama , 01-11-2020 sehingga 31-10-2023 , Kebangsaan |
| Nano-micro Bi-modal Powder Interaction on the Bonding Mechanism of Metal-Metal Bi-Material Formed by Two-Component Bi-Modal Micro-Powder Injection Moulding (2C-2M-µPIM) , Penyelidik Bersama , 01-08-2020 sehingga 31-07-2023 , Universiti |
| Bonding of Polyamide Reinforced Carbon Fibre via Additive Manufacturing , Penyelidik Bersama , 01-08-2020 sehingga 31-01-2023 , Universiti |
| Potential use of copper-phosphorus based filler for joining porous metal to copper alloy via brazing process , Penyelidik Bersama , 01-10-2019 sehingga 31-03-2022 , Universiti |
| Effect of Metal-Ceramic (Bi-material) on Inter-surface Bonding by Micro Co-Powder Injection Molding , Penyelidik Bersama , 01-10-2019 sehingga 31-03-2022 , Universiti |
| Effect of heat treatment on the performance of additive manufactured titanium alloy via selective laser melting , Penyelidik Bersama , 01-10-2019 sehingga 31-03-2022 , Kebangsaan |
| Mechanical Properties and Microstructural Evolution of Thixoformed Graphene Nanosheets Reinforced Aluminium Alloy Matrix Composites , Penyelidik Bersama , 01-09-2019 sehingga 30-11-2022 , Kebangsaan |
| Interaction of energy concentration mechanism and deposition orientations on the appearance and performance of additive manufactured titanium alloy via selective laser melting , Penyelidik Bersama , 01-09-2019 sehingga 30-11-2022 , Kebangsaan |
| Coating and Treatment of Plate For Electrolyzer , Penyelidik Bersama , 01-07-2019 sehingga 28-02-2022 , Kebangsaan |
| The role and mechanism of non-reactive organics acids as recycled e-waste particles surface modifier , Penyelidik Bersama , 01-01-2019 sehingga 30-09-2021 , Kebangsaan |
| Assessment of Biochemical Properties of Bone Cement with Different Sequence of Adding Vancomycin Powder , Penyelidik Bersama , 13-12-2018 sehingga 12-12-2019 , Universiti |
| Extra superplasticity of AA2618 alloy processed by high-pressure torsion , Penyelidik Bersama , 15-11-2018 sehingga 14-05-2021 , Universiti |
| Mesoporous scaffold β-wollastonite-magnetic nanoparticle-strontium composites as bone regeneration for osteoporosis purposes , Penyelidik Bersama , 01-02-2018 sehingga 31-01-2021 , Universiti |
| Penambahbaikan sifat mudah dibiodegradasi, ketahanan haba, mekanikal dan rintangan pelarut bahan poliuretena sebagai alat pencuci paip industri , Penyelidik Bersama , 16-10-2017 sehingga 15-07-2020 , Kebangsaan |
| Plat Dwikutub Ketumpatan Kuasa Tinggi untuk sel fuel dan sel elektrolisis , Penyelidik Bersama , 01-01-2017 sehingga 30-06-2019 , Universiti |
| Magnetic – Non-magenetic Layered Bi-material through Co-Powder Injection Moulding (Co-PIM) , Penyelidik Bersama , 24-10-2016 sehingga 23-10-2019 , Universiti |
| Pencirian dan ketersauran sel fuel mikro berprestasi tinggi sebagai sumber kuasa bersih untuk pesaudara tanpa pemandu (UAV) di ruang udara Malaysia , Penyelidik Bersama , 01-08-2016 sehingga 31-01-2020 , Kebangsaan |
| The investigation of fluid behaviour effects in high temperature proton exchange membrane fuel cell , Penyelidik Bersama , 01-05-2016 sehingga 31-10-2018 , Universiti |
| Evaluation of the Efficacy Skeletal Tissue Repair using Polymer-bioceramics Seeded with Osteogenic Cells , Penyelidik Bersama , 06-04-2016 sehingga 05-04-2018 , Universiti |
| Metal-Ceramic Based Scaffolds and its Regulation on Stem Cell Behaviors in the Repair of Severed Rabbit’s Fibula , Penyelidik Bersama , 31-03-2016 sehingga 30-03-2019 , Antarabangsa |
| Development of Light Weight Materials for Ballistic Applications in Tropical Climates , Penyelidik Bersama , 01-01-2016 sehingga 30-06-2018 , Kebangsaan |
| Effects of graphene dispersion and orientation on mechanical and thermal properties of Copper/graphene composite through Powder injection Moulding , Penyelidik Bersama , 02-11-2015 sehingga 01-11-2019 , Kebangsaan |
| Development of Copper Graphene Composite , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Sustainable Manufacturing Systems and Processes , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Characterisation of Ni-SDCC Composite Anode Thin Film For Micro-Solid Oxide Fuel Cell , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Advanced Copper/Graphene Composite for Thermal Management Application Using a Sustainable Powder Injection Moulding Process , Penyelidik Bersama , 01-06-2015 sehingga 30-11-2017 , Universiti |
| Plat Metal Dwikutub untuk PEMFC , Penyelidik Bersama , 01-08-2014 sehingga 31-10-2017 , Universiti |
| Pembangunan dan Kebolehlaksanaan Elemen Kompleksiti dalam Pengajaran dan Pembelajaran Kejuruteraan , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Universiti |
| Development of Screen-printed Ni-SDCC Composite Anode Thin Film for Micro-Solid Oxide Fuel Cell , Penyelidik Bersama , 01-08-2014 sehingga 31-07-2016 , Antarabangsa |
| Development of Porous Metal via Metal Injection Moulding-Powder Space Holder , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Penambahbaikan Pengedapan Stek PEMFC , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Development of a Micro Solid Oxide Fuel Cell Using Newly Developed Materials , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Sustainable Systems And Processes in Manufacturing , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 01-04-2014 sehingga 31-03-2015 , Universiti |
| Micro powder Injection Moulding of Tungsten Colbalt Chromium and Co-Injection Moulding of Stainless and Zirconia , Penyelidik Bersama , 01-01-2014 sehingga 31-12-2016 , Universiti |
| Pembangunan aspek rubrik untuk penilaian pembangunan kelestarian dan kejuruteraan kompleks dalam kursus kejuruteraan mekanik dan pembuatan , Penyelidik Bersama , 01-07-2013 sehingga 31-12-2014 , Universiti |
| Pembangunan Pelan Pengukuran Pencapaian Hasil Pembelajaran Program Berdasarkan Petunjuk Prestasi dan Aras Taksonomi , Penyelidik Bersama , 01-07-2013 sehingga 31-12-2014 , Universiti |
| Translucency and Improved Fracture Toughness of nanocrystalline oxide Ceramics by Morphology Control , Penyelidik Bersama , 01-04-2013 sehingga 31-03-2015 , Kebangsaan |
| REKA BENTUK PEMBUATAN STEK SEL FUEL 3kW DENGAN SISTEM KATOD TERBUKA , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| PEMBANGUNAN BAHAN ELEKTROD & ELEKTROLIT BAGI SEL FUEL OKSIDA PEPEJAL (SFPOP) BERSUHU RENDAH & SEDERHANA , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| MICROWAVE SINTERIG OF TITANIUM (Ti) ALLOY , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| ADVANCED PROCESSED AND SYSTEMS IN MANUFACTURING ENGINEERING , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| STRUCTURE-PROPERTY RELATIONSHIP, PROCESSING AND PERFORMANCE OF ADVANCED MATERIALS , Penyelidik Bersama , 01-01-2013 sehingga 31-03-2014 , Universiti |
| Yayasan Inovasi Malaysia (YIM) Grassroot Innovation Programme , Penyelidik Bersama , 03-10-2012 sehingga 31-12-2014 , Kebangsaan |
| Machinability and moldability of high strenght kenaf polymer matrix composites , Penyelidik Bersama , 01-07-2012 sehingga 31-01-2018 , Kebangsaan |
| Parameter Study of Metal Injection Moulding and Machining of Titanum Alloy , Penyelidik Bersama , 15-06-2012 sehingga 14-12-2015 , Universiti |
| Development of Fabrication Method for Porosity-free Beta type Ti-10%Mo-10%Cr Alloy as Novel Metallic Biomaterial , Penyelidik Bersama , 01-06-2012 sehingga 31-05-2015 , Kebangsaan |
| Lonjakan Jurutera Profesional di Kalangan Ahli Akademik , Penyelidik Bersama , 01-06-2012 sehingga 01-09-2013 , Universiti |
| Pelaksanaan Program Dwi Ijazah Kejuruteraan Pembuatan dan Kejuruteraan Industri FKAB-FEP, UKM dengan UDE , Penyelidik Bersama , 01-09-2011 sehingga 31-08-2013 , Universiti |
| Two-hand glove-based system for grasping and manipulation of surgical instrument in virtual knee replacement surgery training , Penyelidik Bersama , 08-08-2011 sehingga 08-11-2012 , Universiti |
| Characterisation and Evaluation of the Effect of Nano Powders in the Metal Injection Molding Process , Penyelidik Bersama , 21-06-2011 sehingga 20-12-2014 , Kebangsaan |
| Electrically Conducting Polymer Composites for Fuel Cell Bipolar Plate , Penyelidik Bersama , 21-06-2011 sehingga 20-12-2014 , Kebangsaan |
| Characterization and Peridynamic Modeling of Shape Memory Alloy-based Self-Healing Composite Aerospace , Penyelidik Bersama , 21-06-2011 sehingga 19-06-2014 , Kebangsaan |
| Effect of vanadium Carbide (VC) on the Properties and Microstructure of Ultrafine tungsten Carbide (WC-10C0) Component Produced by Micro Powder Injection Molding Process , Penyelidik Bersama , 06-06-2011 sehingga 05-06-2015 , Kebangsaan |
| Pengukuran Hasil Pembelajaran Menggunakan Model Rasch bagi Kursus Asas Jabatan di FKAB , Penyelidik Bersama , 01-04-2011 sehingga 30-06-2012 , Universiti |
| Rekabentuk, Pembuatan dan Ujian Prestasi Kereta Sel Fuel 5 KW , Penyelidik Bersama , 01-10-2010 sehingga 01-04-2013 , Universiti |
| Design and Fabrication of Surface Topology as a tool for Stem Cells Differentiation through Morphological Regulation , Penyelidik Bersama , 01-10-2010 sehingga 30-09-2012 , Universiti |
| Perkembangan Kreativiti dan Inovasi Pelajar Pintar Cerdas melalui Teknologi , Penyelidik Bersama , 01-03-2010 sehingga 28-02-2011 , Kebangsaan |
| Penggunaan Proses Penyuntikan Serbuk Mikro untuk Menghasilkan Komponen untuk Rawatan Pergigian , Penyelidik Bersama , 01-07-2009 sehingga 01-01-2013 , Universiti |
| Bahan Baru dalam Sel Fuel dan Tenaga Hidrogen , Penyelidik Bersama , 01-07-2009 sehingga 30-06-2012 , Universiti |
| Pengaruh Penambahbaikan Konduktiviti Plat Dwikutub Terhadap Prestasi Stak Sel Fuel Membran Elektrolit Polimer , Penyelidik Bersama , 01-06-2008 sehingga 30-06-2013 , Universiti |
| Development of a bio-functionalized bone implant (metal-ceramic infused with active biomolecules) for bone defect , Ketua Program , 01-02-2018 sehingga 31-01-2021 , Universiti |
| Mesoporous scaffold β-wollastonite-magnetic nanoparticle-strontium composites as bone regeneration for osteoporosis purposes , Ketua Program , 01-02-2018 sehingga 31-01-2021 , Universiti |
| Tajuk Program: Metal-Ceramic Composite: A New Generation Material for Bone Implant Tajuk Projek: Metal-ceramic based scaffolds and its regulation on stem cell behaviors , Ketua Program , 01-02-2015 sehingga 31-01-2019 , Kebangsaan |
| Tajuk Program: Metal-Ceramic Composite: A New Generation Material for Bone Implant Tajuk Projek: A study on the role and mechanism of argentum and superparamagnetic material in the prperties of wollastonite-based bioglass material for biomedical applicat , Ketua Program , 01-02-2015 sehingga 31-01-2019 , Kebangsaan |
| Tajuk Program: Metal-Ceramic Composite: A New Generation Material for Bone Implant Tajuk Projek: Effect of Processing Parameters on Novel Metal-Ceramic Composite through Powder Injection Molding , Ketua Program , 01-02-2015 sehingga 31-01-2019 , Kebangsaan |
| INVESTIGATION OF THE RIGIDITY OF COCRMO CELLULAR STRUCTURE FABRICATED BY SELECTIVE LASER MELTING PROCESS FOR POTENTIAL DENTAL APLLICATIONS , Mentor , 04-01-2016 sehingga 29-12-2017 , Kebangsaan |
| Anugerah Pengajar Cemerlang , 2009 |
| Anugerah Penyelidikan , 2010 |
| Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2010 |
| Anugerah Khas Kualiti / Anugerah Penyelidikan (Berkumpulan) , 2011 |
| Anugerah Penyelidikan , 2012 |
| Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2014 |
| Anugerah Perkhidmatan Cemerlang / Anugerah Perkhidmatan Cemerlang , 2019 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2022 (Penyeliaan) - Sijil Penghargaan , 2023 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2022 (Pendanaan) - Sijil Penghargaan , 2023 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2022 (Keseluruhan) - Sijil Penghargaan , 2023 |
| Penghargaan PTJ , 2023 |
| ANUGERAH PENJANAAN KEWANGAN , 2023 |
| PECIPTA 2022 - International Conference and Exposition on Inventions by Institutions of Higher Learning , 2022 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2020 (Penyeliaan) - Sijil Penghargaan , 2022 |
| Anugerah Bitara Penerbitan (Makalah) , 2021 |
| Top Research Scientist Award (TRSM) , 2021 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2019 (Penyeliaan) - Sijil Penghargaan , 2021 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2019 (Penerbitan) - Sijil Kecemerlangan , 2021 |
| MyRA - Anugerah Kecemerlangan MyRA Prestasi 2019 (Keseluruhan) - Sijil Kecemerlangan , 2021 |
| Anugerah Bitara Sarjana (Individu) , 2020 |
| Anugerah Bitara Sarjana Harapan , 2016 |
| PENCIRIAN FILAMEN KOMPOSIT POLIAMIDA DIPERKUAT GENTIAN KARBON MENGGUNAKAN PERMODELAN PEMENDAPAN BERSATU, NISA NAIMA BINTI KHALID, Sarjana |
| CHEN DONGWEI, Sarjana |
| Proses Pengacuan Suntikan Logam Mikro Optimum Bagi bahan Suapan Keluli Tahan., HAW PEI LI, Sarjana |
| Pengoptimuman Parameter Pengacuanan Suntikan Logam Dan Penyahikatan, MUHAMMAD ILMAN HAKIMI CHUA BIN ABDULLAH, Sarjana |
| Keupayaan Pemprosesan YTRIA Zirkonia Terstabil Bersaiz Nano Dengan bahan Pengikat Berasaskan Stearin Sawit Dalam Pengacuan suntikan SERBUK Mikro, FARHANA BINTI MOHD FOUDZI, Sarjana |
| Kesan Rawatan Asid dan Rawatan uv/03 Nanotiub Karbon Berbilang Dinding (MWCNTs) Ke Atas Sifat Elektrik Epoksi Nanokomposit., NISHATA ROYAN A/P RAJENDRAN ROYAN, Sarjana |
| MOHD FAZURI BIN ABDULLAH, Sarjana |
| Kesan Parameter Pejaman Elektrik Ke Atas Morfologi dan Sifat Mekanik Gentian Bersaiz, SITI SANIAH BINTI AB KARIM, Sarjana |
| Pemprosesan Komposit Serbuk Keluli Tahan Karat (316L) – Hidrosiapatit Melalui Pengacuan Suntikan Serbuk, MOHD IKRAM BIN RAMLI, Sarjana |
| KAJIAN KEBOLEHUPAYAAN ALOI TITANIUM BAGI PROSES PELEBURAN LASER SELEKTIF, MINHALINA BINTI AHMAD BUHAIRI, Sarjana |
| PEMBANGUNAN KATOD KOMPOSIT LSCF-SDC KARBONAT MELALUI KAEDAH, NURUL AKIDAH BINTI BAHARUDDIN, Sarjana |
| TOPOGRAFI PERMUKAAN DAN PENILAIAN BIOLOGI BAGI ALOI TITANIUM MELALUI PROSES PENCAIRAN LASER TERPILIH., SHAN. LIJUN, Sarjana |
| Effect of Carbon Fibers FIller On Electrical and Mechanical Properties OF Polymer Composite, MOHD YUSUF BIN ZAKARIA, Sarjana |
| KESAN VANADIUM KARBIDA KE ATAS SIFAT MEKANIKAL DAN FIZIKAL KOMPONEN, WONG YEE NING, Sarjana |
| MOHAMAD AMIR SHAFIQ BIN HAJI MOHD TAHIR, Sarjana |
| WAN AHMAD SHAHRUDDIN BIN WAN IBRAHIM, Sarjana |
| Kajian Mengenai Kesan Haba Bersuhu Tinggi Terhadap Prestasi Plat Dwi Kutub bagi Sel Fuel Tunggal, MOHAMAD AISAMUDIN B. SHUHAIMI, Sarjana |
| NOOR AINI BINTI AB RANI, Sarjana |
| SIFAT FIZIKAL, MEKANIK, DAN TERMA BAGI PENGACUAN SUNTIKAN LOGAM, NATASHA EMIRA BINTI AZAMAN, Sarjana |
| PROSES PENSINTERAN KOMPOSIT KUPRUM GRAFIN MELALUI PENGACUANAN, NOR NABILLA BINTI KADIMAN, Sarjana |
| Analisis Kesan Taburan Tekanan Pemasangan Terhadap Prestasi 5 kW Sel Fuel, AHMAD TAJUDDIN BIN ABDULLAH, Sarjana |
| ZALINA BINTI YA, Doktor Falsafah |
| MOHD. RHAFIQ BIN MAZLAN, Doktor Falsafah |
| NUR AISYAH MIZA BINTI AHMAD TAMIZI, Doktor Falsafah |
| PROSES PENGACUAN SUNTIKAN DWISERBUK BAGI ZIRKONIA DAN HIDROKSIAPATIT, MUHAMMAD BIN MOHAMED AMIN, Doktor Falsafah |
| KAMBIZ RASHIDI, Doktor Falsafah |
| LI XIAOJU, Doktor Falsafah |
| FAIZAH BINTI OSMAN, Doktor Falsafah |
| ABDUL REHMAN, Doktor Falsafah |
| FATHIN ILIANA BINTI JAMHARI, Doktor Falsafah |
| MUHAMMAD ASYRAF BIN ABDULLAH, Doktor Falsafah |
| AUFA SIRRY BINTI YASHAA, Doktor Falsafah |
| Pemprosesan Dan Sifat-Sifat Komposit Epoksi-Karbon-Karbon nano-Tiub., HENDRA SUHERMAN, Doktor Falsafah |
| Kebolehan Suntikan Logam Mikro SS316L Menggunakan Bahan Pengikat PEG & PMMA., MOHD HALIM IRWAN BIN IBRAHIM, Doktor Falsafah |
| OPTIMIZATION OF DEBINDING &SINTERING PROCESS IN UMIM, HAFIZAWATI BINTI ZAKARIA, Doktor Falsafah |
| KESAN PENGGABUNGAN SAIZ PARTIKEL PENGISI DAN PROSES PENGACUAN KE ATAS, ISWANDI, Doktor Falsafah |
| Investigation on the optimum prosess parametes of the metal ijection moulding technique, FAUZI BIN ISMAIL, Doktor Falsafah |
| Progressive Failure Characteristics Of Woven Natural Silk Epoxy Composite Tube In Quasi-Static Compression, RAHIM ATAOLLAHI ESHKOOR, Doktor Falsafah |
| Micro Powder Injection Moulding of Cemented Tungsten Carbide, ABDOLALI FAYYAZ, Doktor Falsafah |
| Pembangunan Titanium berbusa., TAN KOON TATT, Doktor Falsafah |
| The Effects of Nano-Sized Stainless Steel Powders on The Processing Parameters of Micro Powder Injection Moulding Process, JAVAD RAJABI, Doktor Falsafah |
| PENGACUANAN SUNTIKAN LOGAM MIKRO CoCrMo MENGGUNAKAN BAHAN PENGIKAT POLIETILENA/STEARIN SAWIT, AZIZAH BINTI WAHI, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERBUK Ti6A17Nb ALOI MENGGUNAKAN PENGIKAT BERASASKAN STEARIN SAWIT, ROZIE NANI BINTI AHMAD, Doktor Falsafah |
| STEPHANIE KONG LEE KEONG, Doktor Falsafah |
| Pengacuaanan Suntikan Serbuk Komposit Hidroksiapatit / Titanium Aloi (Ti6A14V), AMIR ARIFIN, Doktor Falsafah |
| PROSES PENGACUANAN SUNTIKAN KOMPOSIT POLIPROPILENA, MOHD KHAIRUL FADZLY BIN MD RADZI, Doktor Falsafah |
| SHABBAH BEGUM, Doktor Falsafah |
| Pengacuan Suntikan Hallosit Nanotiub-Thermoplastik Poliuretana Nanokomposit Bagi Peningkatan Sifat Mekanik dan Fizikal., TAYSER SUMER GAAZ, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERBUK MIKRO DUA KOMPONEN BAGI DWI-BAHAN KELULI TAHAN KARAT 17-4PH DAN ZIRKONIA TERSTABIL YTTRIA, AL BASIR, Doktor Falsafah |
| PENCIRIAN KOMPOSIT EPOKSI DIPERKUAT GENTIAN KENAF UNTUK APLIKASI KOMPONEN AUTOMOTIF, NUR FARHANI BINTI ISMAIL, Doktor Falsafah |
| CIRI KEBOLEHLANGGARAN TIUB KOMPOSIT BIO-EPOKSI®/RAMIE TENUN, MAJID JAFARZADEHGHOUSHJI, Doktor Falsafah |
| PROSES PENEKANAN PANAS KOMPOSIT POLIPROPILENA DIPERKUAT, DULINA BINTI THOLIBON, Doktor Falsafah |
| Structural Dynamic Study Of An Automobile Exhaust System, NOORAZIZI BIN MOHD SAMSUDDIN, Doktor Falsafah |
| Proses Penyemperitan Komposit Polipropilena Diperkuat Gentian Karbon Berkisar, NABILAH AFIQAH BINTI MOHD RADZUAN, Doktor Falsafah |
| PEMPROSESAN KOMPOSIT PEJAL & BERBUSA DARI POLIMER KITAR SEMULA, NISHATA ROYAN A/P RAJENDRAN ROYAN, Doktor Falsafah |
| PENGACUAN SUNTIKAN SEBUK 2-KOMPONEN (2C-PIM) KELULI TAHAN, UKWUEZE BONAVENTURE EMEKA, Doktor Falsafah |
| Himpunan Membran Asid Terdop Polibenzimidazol dengan Pengubahsuaian Karbon Nanotiub Berbilang Tersokong Electrod Platinum bagi Pem Sel Fuel Bersuhu Tinggi, MD. AHSANUL HAQUE, Doktor Falsafah |
| PROSES PENEKANAN PANAS KOMPOSIT POLILAKTIK - ASID DIPERKUAT GENTIAN KENAF, IZDIHAR BINTI THARAZI, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERAMIK HIDROSIAPATIT MENGGUNAKAN, FARRAHSHAIDA BINTI MOHD SALLEH, Doktor Falsafah |
| Pencirian dan Pengoptimuman Salutan Kromium Karbida dan Niobium Karbida Untuk Plat Dwikutub Bagi Aplikasi Sel Fuel Membran Penukaran Proton, NUR FAWWAZ BINTI ASRI, Doktor Falsafah |
| Fabrication Of Dental Burs From Cemented Tungsten Carbide Using Micro-Powder Injection Moulding, IR. MOHAMAD ZUBIR BIN ZULFAQAR AHMAD, Doktor Falsafah |
| SIFAT-SIFAT MEKANIKAL DAN PENGACUAN SUNTIKAN KOMPOSIT HIDRID KARBON NANOTIUB/KENAF/POLIPROPILENA BAGI APLIKASI AUTOMOTIF, ZAKARIA BIN RAZAK, Doktor Falsafah |
| Pembangunan Sistem Kawalan Reaktan Responsif Untuk Sistem Sel Fuel Membran Penukaran Proton Bersuhu Tinggi (HT-PEMFC) Bagi Penjimatan Penggunaan Hidrogen, ROS EMILIA BINTI ROSLI, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERBUK KOMPOSIT TITANIUM ALOI-WOLASTONIT, MOHD IKRAM BIN RAMLI, Doktor Falsafah |
| PROSES PENGACUANAN SUNTIKAN DWISERBUK BAGI KELULI TAHAN KARAT 17-4PH DAN 316L, NAJLAA NAZIHAH BINTI MAS`OOD, Doktor Falsafah |
| PEMBANGUNAN BERASASKAN PERANCAH TITANIUM-WOLLASTONITE DAN PENGAWALANNYA, LOHASHENPAHAN SHANMUGANANTHA, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERBUK KOMPOSIT TITANIUM-HIDROKSIAPATIT, MOHD YUSUF BIN ZAKARIA, Doktor Falsafah |
| Penentuan Parameter Maksimum Pemasangan Stek Sel Fuel Membran Penukaran Proton, NURATO, Doktor Falsafah |
| PEMPROSESAN KOMPOSIT ALOI ALUMINIUM DIPERKUAT NANOTIUB KARBON MELALUI KAEDAH TUANGAN LEBURAN UNTUK PEMBENTUKAN-TIKSO, HANIZAM HASHIM, Doktor Falsafah |
| KHAIRUL NAIM BIN AHMAD, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERBUK BAGI TITANIUM ALOI BERBENTUK TIDAK SEKATA-HIDROSIAPATIT SEBAGAI BAHAN IMPLAN, NURUL NADIAH BINTI MAHMUD, Doktor Falsafah |
| MUHAMMAD IDRIS SYAFIQ BIN SAHIBIN, Doktor Falsafah |
| MOHD FADLI BIN HASSAN, Doktor Falsafah |
| MAHATHIR MOHAMED, Doktor Falsafah |
| Universiti Kuala Lumpur Institute of Product Design and Manufacturing , 01-09-2015 sehingga 30-08-2017 , Kebangsaan |
| Investigation on relationship between porosity and spacer content of titanium foams , 21-07-2015 sehingga 30-09-2015 , Antarabangsa |
| Multi-attribute optimization of machining process parameters in Powder Mixed Electro- Discharge Machining using TOPSIS and Grey Relational Analysis , 08-05-2015 sehingga 07-07-2015 , Antarabangsa |
| Experimental Investigation of operating parameters on performance PEMFC , 20-05-2015 sehingga 20-07-2015 , Antarabangsa |
| Competition Judge of Materials Lecture Competition , 03-05-2018 sehingga 01-01-1970 , Kebangsaan |
| Abu Bakar Bin Sulong , 03-05-2018 sehingga 10-07-2018 , Antarabangsa |
| Penilai Luar Projek Penyelidikan , 13-03-2018 sehingga 01-01-1970 , Kebangsaan |
| SEMINAR HALATUJU LEPASAN SPM, STPM DAN SIJIL LATIHAN , 05-03-2016 sehingga 05-03-2016 , Daerah / Jajahan |
| AHLI JAWATANKUASA PROJEK GOLD (SIRIM STANDARD) , 19-10-2017 sehingga 20-10-2018 , Kebangsaan |
| SEMINAR PEMILIHAN KURSUS PERINGKAT SIJIL, DIPLOMA DAN IJAZAH , 05-03-2017 sehingga 05-03-2017 , Daerah / Jajahan |
| Invited Speaker RCM & AMC 2017 , 12-12-2017 sehingga 13-12-2017 , Antarabangsa |
| AJK Penilaian Dana Fundamental KPT 2018 , 10-01-2018 sehingga 01-06-2018 , Kebangsaan |
| Professor Pelawat di Bung Hatta University Indonesia , 26-08-2018 sehingga 31-08-2018 , Antarabangsa |
| Keynote di ESTIC 2018 The 4th Engineering Science and Technology International Conference 2018 , 28-08-2018 sehingga 29-08-2018 , Antarabangsa |
| Penilai Luar Projek Penyelidikan , 13-03-2018 sehingga 27-03-2018 , Kebangsaan |
| Panel Penilai Final Year Project MJHEP , 05-03-2018 sehingga 05-03-2018 , Kebangsaan |
| Sharing Session TRGS grant UiTM , 14-02-2018 sehingga 14-02-2018 , Kebangsaan |
| Visiting Professor to Hangzhou Dianzi University HDU China , 03-05-2018 sehingga 10-05-2018 , Antarabangsa |
| Penilai Luar Projek Penyelidikan YUTP , 02-05-2018 sehingga 01-05-2022 , Kebangsaan |
| Board of Engineer Malaysia , 01-01-2016 sehingga 31-12-2016 , Kebangsaan |
| UNIKL - IPROM , 02-10-2017 sehingga 30-09-2022 , Kebangsaan |
| UNIKL - IPROM , 01-09-2015 sehingga 30-08-2018 , Kebangsaan |
| Invited Speaker 5th international Conf and Exhibition on Energy and Advanced Materials , 16-10-2017 sehingga 19-10-2017 , Antarabangsa |
| IOS Insititute of Science UiTM colloqium series (20/2017) , 10-11-2017 sehingga 10-11-2017 , Kebangsaan |
| Invited Speaker in National Symposium on Powder Metallurgy 2017 , 17-04-2017 sehingga 17-04-2017 , Antarabangsa |
| Invited Speaker at 25th Annual International Conf on Composites and Nano Engineering ICCE-25 , 16-07-2017 sehingga 22-07-2017 , Antarabangsa |
| Ketua Panel Penilai Akreditasi EAC bagi program kejuruteraan mekanikal USM , 05-12-2017 sehingga 08-12-2017 , Antarabangsa |
| AJK Penilaian Dana Fundamental KPT 2017 , 22-02-2017 sehingga 31-12-2017 , Kebangsaan |
| Keynote Speaker International Conference on Advances in Materials and Processing Technologies , 08-11-2018 sehingga 11-11-2016 , Antarabangsa |
| Invited Speaker on Symposium & Exhibition on Additive Manufacturing SEAM 2016 , 26-07-2017 sehingga 27-07-2016 , Antarabangsa |
| Penilai Luar Program GMI Diploma in Production Technology , 22-02-2016 sehingga 23-02-2016 , Kebangsaan |
| Penilaian Hasil penulisan bagi kenaikan pangkat staf akademik UiTM , 05-01-2016 sehingga 10-02-2016 , Kebangsaan |
| AJK Penilaian Dana Fundamental KPT 2016 , 28-06-2016 sehingga 31-12-2016 , Kebangsaan |
| Keynote Speaker AVoER-8 Seminar Nasional Penelitian dan Pengabdian Pada Masyarakat , 19-10-2016 sehingga 20-10-2016 , Antarabangsa |
| Visiting Professor to Sriwijaya University Indonesia , 17-10-2016 sehingga 20-10-2016 , Antarabangsa |
| Board of Engineer Malaysia , 01-01-2015 sehingga 31-12-2015 , Kebangsaan |
| Karnival Pendidikan dna Kerjaya Kolej Matrikulasi Johor , 26-11-2015 sehingga 28-11-2015 , Kebangsaan |
| Panel Penilain National Conference on Mechanical Engineering 2014 , 23-06-2014 sehingga 25-06-2014 , Kebangsaan |
| Board of Engineer Malaysia , 01-01-2019 sehingga 31-12-2019 , Kebangsaan |
| Board of Engineer Malaysia , 01-01-2018 sehingga 31-12-2018 , Kebangsaan |
| Board of Engineer Malaysia , 01-01-2017 sehingga 31-12-2017 , Kebangsaan |
| Board of Engineer Malaysia , 01-01-2016 sehingga 31-12-2016 , Kebangsaan |
| MJIIT Takasago Research Grant , 10-08-2016 sehingga 11-01-2016 , Antarabangsa |
| Facile fabrication of electrically conductive graphitic cellufoil for lighting and energy devices , 05-10-2020 sehingga 21-10-2020 , Antarabangsa |
| Polymer Reviewer Board , 23-09-2020 sehingga 01-01-1970 , Antarabangsa |
| Review about evaluating magnetization effectiveness and demagnetization of particle-polymer composites , 31-08-2020 sehingga 21-09-2020 , Antarabangsa |
| Natural/synthetic fibers reinforced hybrid composites with tailored mechanicalproperties for lightweight load bearing structures , 27-05-2020 sehingga 11-06-2020 , Antarabangsa |
| Multifunctional coatings on additively manufactured porous Ti-6Al-4V implants: combining silver nanoparticleswith hydrothermally synthesized HA nanocrystals , 10-05-2020 sehingga 31-05-2020 , Antarabangsa |
| New insights on the porous network created during solvent debinding of powder injection-molded (PIM) parts,and its influence on the thermal debinding efficiency , 24-10-2020 sehingga 14-11-2020 , Antarabangsa |
| Effect of forming parameters on the microstructure and mechanical properties of thixoformed GH4037 parts , 07-10-2020 sehingga 26-10-2020 , Antarabangsa |
| Panel Penilai Audit Akreditasi Penuh MQA , 06-10-2020 sehingga 06-10-2020 , Kebangsaan |
| A Novel Strategy to Construct Polybenzimidazole Linked Crosslinking Networks Exhibiting OverallImprovements for PEMFC Application , 20-02-2020 sehingga 12-03-2020 , Antarabangsa |
| High frequency and switching field response of Ca doped spinel nanocrystalline ferrites prepared by the sol gelauto ignition route , 16-02-2020 sehingga 08-03-2020 , Antarabangsa |
| Structural and magnetic features of Ce doped Co-Cu-Zn spinel nanoferrites prepared using sol gel self-ignitionmethod , 10-12-2019 sehingga 31-12-2020 , Antarabangsa |
| Polybenzimidazole-Modified Carbon Nanotubes as a Support Material for Platinum-Based High-TemperatureProton Exchange Membrane Fuel Cell Electrocatalysts , 17-06-2020 sehingga 03-07-2020 , Antarabangsa |
| Polybenzimidazole-Modified Carbon Nanotubes as a Support Material for Platinum-Based High-TemperatureProton Exchange Membrane Fuel Cell Electrocatalysts , 17-06-2020 sehingga 03-07-2020 , Antarabangsa |
| Enhanced Membrane Electrode Assembly Performance by Adding PTFE-coated Carbon Black for HighTemperature Polymer Electrolyte Membrane Fuel Cell , 03-08-2020 sehingga 21-08-2020 , Antarabangsa |
| Kenaf fibre treatment and its impact on the static, dynamic, hydrophobicity and barrier properties of polystyrenebiocomposites , 26-04-2020 sehingga 15-05-2020 , Antarabangsa |
| Panel MQA Fakulti Teknologi dan Informatik Razak (FTIR), Universiti Teknologi Malaysia (UTM) Kuala Lumpur. , 06-10-2020 sehingga 20-10-2020 , Kebangsaan |
| Panel Akreditasi ETAC Quest International University Perak (QIUP) , 08-09-2020 sehingga 09-10-2020 , Kebangsaan |
| Panel Penilai ETAC 2020 , 01-01-2020 sehingga 31-12-2020 , Kebangsaan |
| Panel Penilai Dana KPT (FRGS, PRGS, PRGS 2,0) peringkat Pusat KPT , 01-01-2020 sehingga 31-12-2020 , Kebangsaan |
| Sidang Editor Jurnal Kejuruteraan , 01-07-2020 sehingga 30-06-2023 , Antarabangsa |
| Penilai Akreditasi ETAC Politeknik Kota Kinabalu , 01-10-2019 sehingga 15-11-2019 , Kebangsaan |
| Panel Penilai Dana KPT (FRGS, PRGS, PRGS 2,0) peringkat Pusat KPT , 01-01-2021 sehingga 31-12-2021 , Kebangsaan |
| DIPLOMA EKSEKUTIF TEKNOLOGI PEMBUATAN, UNIVERSITI TEKNOLOGI MALAYSIA (UTM) , 06-08-2021 sehingga 06-08-2021 , Kebangsaan |
| MANIPAL International University , 06-04-2021 sehingga 07-12-2021 , Kebangsaan |
| Kolej Kemahiran Tinggi MARA Balik Pulau (KKTM BP) , 12-01-2021 sehingga 13-12-2021 , Kebangsaan |
| Politeknik Kota Kinabalu (PKK) , 08-11-2021 sehingga 31-12-2021 , Kebangsaan |
| PENAZIRAN LAPORAN PEMANTAUAN DANA PENYELIDIKAN KEMENTERIAN PENGAJIAN TINGGI (DP KPT) TAHUN 2021 , 25-05-2021 sehingga 31-12-2021 , Kebangsaan |
| DURABILITY BEHAVIOUR OF MAGNETORHEOLOGICAL ELASTOMER UNDER TORSIONAL SHEAR LOAD , 15-09-2021 sehingga 01-01-1970 , Kebangsaan |
| Sifat-sifat Mekanikal, Kelakuan Higrotermal, Elektrikal dan Tribologikal Komposit Polikarbonat Diperkuat Gentian Karbon Pendek yang Dikitar Semula , 06-05-2021 sehingga 01-01-1970 , Kebangsaan |
| Development of porous polycaprolactone/hydroxyapatite (PCL/HA) composite using supercritical carbon dioxide solid state foaming , 16-01-2021 sehingga 01-01-1970 , Kebangsaan |
| Fabrication and Characterization of Carbon-Nanotube Based Flexible Printed Strain Sensor , 24-05-2021 sehingga 01-01-1970 , Kebangsaan |
| Thermally induced mechanical work and warpage mitigation of asymmetric laminates , 21-01-2021 sehingga 21-02-2021 , Antarabangsa |
| Combining ultrasound directed self-assembly and 3D printing to fabricate engineered polymer matrix composite materials with anisotropic electrical conductivity , 03-05-2021 sehingga 03-06-2021 , Antarabangsa |
| Top-hat crashboxes of thermoplastic fibre-metal-laminates processed in one-step thermoforming: Experimental and numerical study , 06-07-2021 sehingga 16-08-2021 , Antarabangsa |
| Structural, magnetic, and electrical evaluations of rare earth Gd3+ doped in mixed Co-Mn spinel ferrites nanoparticles , 09-08-2021 sehingga 13-09-2021 , Kebangsaan |
| Effect of Powder Characteristics on Flash Sintering of Hydroxyapatite , 30-08-2021 sehingga 02-10-2021 , Antarabangsa |
| Investigation into the structural and magnetic features of nickel doped U-type hexaferrites prepared through sol-gel method , 22-11-2021 sehingga 11-12-2021 , Antarabangsa |
| ynergistic Enrichment of Electrically Conductive Carbon Nanotubes/Carbon Black Reinforced PolypropyleneGraphite Composites for Fuel Cell Bipolar Plates , 20-11-2021 sehingga 09-12-2021 , Antarabangsa |
| Improving mechanical properties of Mg-Sc alloy by surface AZ31 layer , 19-11-2021 sehingga 07-12-2021 , Antarabangsa |
| Top Research Scientist Award (TRSM) , 28-09-2021 sehingga 01-01-1970 , Kebangsaan |
| Synthesis of silica Janus nanosheets and their application to the improvement of interfacial interaction in wood polymer composites , 13-10-2021 sehingga 15-11-2021 , Antarabangsa |
| KDU University College (UOW Malaysia) , 05-05-2022 sehingga 04-05-2026 , Kebangsaan |
| UiTM , 01-02-2022 sehingga 31-01-2024 , Kebangsaan |
| Panel Penilai Dana KPT 2022 , 01-01-2021 sehingga 31-12-2022 , Kebangsaan |
| Panel Penilai Lawayan Verfication Progrtam Kejuruteraan , 17-03-2022 sehingga 17-03-2022 , Kebangsaan |
| Panel Penilai Dana KPT 2022 , 01-01-2022 sehingga 31-12-2022 , Kebangsaan |
| KKTM Balik Pulau , 28-09-2022 sehingga 31-12-2022 , Kebangsaan |
| PECIPTA 2022 - International Conference and Exposition on Inventions by Institutions of Higher Learning , 03-11-2022 sehingga 01-01-1970 , Antarabangsa |
| PECIPTA 2022 - International Conference and Exposition on Inventions by Institutions of Higher Learning , 03-11-2022 sehingga 01-01-1970 , Antarabangsa |
| Tailoring the Exchange Bias in Magnetic Multilayered Structures , 06-06-2022 sehingga 01-01-1970 , Antarabangsa |
| Tailoring the Exchange Bias in Magnetic Multilayered Structures , 06-06-2022 sehingga 01-01-1970 , Antarabangsa |
| : Synthesis of Chromite Spinel Oxides and Their Characterization for Energy Applications , 15-06-2022 sehingga 01-01-1970 , Antarabangsa |
| Microwave-Assisted Sol-Gel Based Iron Oxide Thin Films: Preparation and Magnetodieletric , 06-07-2022 sehingga 01-01-1970 , Antarabangsa |
| Graphite-epoxy composites for bipolar plates: the gas permeability issue , 19-07-2022 sehingga 19-08-2022 , Antarabangsa |
| Comparative and sensitivity analysis of operating conditions on the performance of a high temperature PEM fuel cell , 05-11-2022 sehingga 05-12-2022 , Antarabangsa |
| Multi-objective Planning and Optimization of Microgrid Lithium Iron Phosphate Battery Energy Storage System under Different Power Supply States , 01-02-2022 sehingga 02-03-2022 , Antarabangsa |
| Hydrogen Crossover Measurement and Durability Assessment of High Pressure Proton Exchange Membrane Electrolyzer , 26-11-2022 sehingga 26-12-2021 , Antarabangsa |
| : Additive manufacturing of a novel 3D multi-gradient interwoven structure to enhance the hardness and dynamic mechanical property of 316L stainless steel , 06-11-2022 sehingga 07-12-2022 , Antarabangsa |
| Panel Penilai Dana KPT FRGS 2023 , 29-05-2023 sehingga 29-07-2023 , Kebangsaan |
| Panel Penazir Pemantauan Dana KPT 2023 , 01-06-2023 sehingga 30-06-2023 , Kebangsaan |
| Lawatan Penilaian Program Kejuruteraan Polimer USM , 12-09-2023 sehingga 14-12-2023 , Kebangsaan |
| Panel Penilai Luar bagi kenaikan pangkat DS54 UMP , 14-09-2023 sehingga 14-10-2023 , Kebangsaan |
| Panel Penilai Luar bagi kenaikan pangkat Prof Madya dan Professor UPM , 29-03-2023 sehingga 31-05-2024 , Kebangsaan |
| Pemeriksa Luar Program Kejuruteraan Polimer UNIMAP , 08-09-2023 sehingga 08-09-2025 , Kebangsaan |
| Fakulti Kejuruteraan Teknologi dan Kejuruteraan Mekanikal (FTKM)< Universiti Teknikal Malaysia Melaka (UTeM) , 01-05-2024 sehingga 30-04-2026 , Kebangsaan |
| Fakulti Kejuruteraan Teknologi & Kimia, UniMAP , 01-01-2024 sehingga 31-07-2026 , Kebangsaan |
| Panel Dana FRGS KPT 2024 , 01-01-2024 sehingga 01-12-2024 , Kebangsaan |
| Ahli Jawatankuasa Penilai Geran Penyelidikan di bawah Dana UP Tahun 2020 , 15-05-2020 sehingga 31-12-2020 , Universiti |
| Audit Prestasi Akademik (Audit Bersepadu) , 15-04-2019 sehingga 29-02-2020 , Universiti |
| BENGKEL PENILAIAN DANA GERAN UNIVERSITI PENYELIDIKAN (GUP) TAHUN 2019 , 01-08-2019 sehingga 01-08-2019 , Universiti |
| BENGKEL PENILAIAN PROJEK DANA GERAN GALAKAN PENYELIDIK MUDA (GGPM) TAHUN 2019 , 31-07-2019 sehingga 31-07-2019 , Universiti |
| BENGKEL PENILAIAN PROJEK DANA GERAN UNIVERSITI PENYELIDIKAN (GUP) TAHUN 2019 , 31-07-2019 sehingga 31-07-2019 , Universiti |
| BENGKEL PENILAIAN PROJEK DANA IMPAK PERDANA (DIP) TAHUN 2019 , 31-07-2019 sehingga 31-07-2019 , Universiti |
| GOTONG-ROYONG WARGA CRIM (PEMBERSIHAN PEJABAT DAN HIASAN MERDEKA) , 20-09-2024 sehingga 20-09-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Geran FRGS 2024 , 01-12-2023 sehingga 31-12-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| INTRODUCING OXYGEN VACANCIES IN Fe2o3 USING NITROGEN-BASED AEROSOL-ASSISTED CHEMICAL VAPOUR DEPOSITION (AACVD) PROCESS , 16-11-2018 sehingga 16-11-2018 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| JAWATANKUASA KONGRES PEMERKASAAN BAHASA DAN TAMADUN ALAM MELAYU , 15-08-2022 sehingga 29-09-2022 , Universiti |
| JAWATANKUASA PENILAIAN PRGS FASA 1/2019 , 15-01-2019 sehingga 14-01-2020 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| JK Paten PIK , 29-01-2019 sehingga 29-01-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankkuasa Mechanical Engineering Multiconference 2019 , 01-04-2018 sehingga 30-04-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Bengkel Siri 27/2019: Bengkel Strategies in Writing High Impact Journal , 11-09-2019 sehingga 11-09-2019 , Universiti |
| Jawatankuasa Bengkel Siri 38/2018 : PhD/MSc. Survivor : Acceptance in High Impact Journal , 30-10-2018 sehingga 30-10-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa ICFCHT-SFCHT2023 , 30-08-2022 sehingga 06-09-2023 , Universiti |
| Jawatankuasa Kecil Pelaksana Bidang Keberhasilan (KRA) Teras 1 , 14-07-2014 sehingga 13-07-2017 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Kepakaran IIR4.0 , 01-10-2020 sehingga 30-09-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Kualiti CRIM , 01-01-2020 sehingga 01-01-1970 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Lawatan Latihan Industri Sesi 2023 , 14-08-2023 sehingga 11-10-2023 , Universiti |
| Jawatankuasa Panel Editor Jurnal Kejuruteraan , 01-07-2020 sehingga 30-06-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Panel Penilai Dana Penyelidikan Peringkat Fakulti , 01-06-2022 sehingga 31-12-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pemeriksa Siswazah Bil 31/2015 , 14-04-2015 sehingga 14-04-2015 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Pemeriksa Siswazah Bil. 40/2016 (M) , 27-10-2016 sehingga 27-10-2016 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pemeriksa Siswazah Bil. 5/2016 (M) , 31-03-2016 sehingga 31-03-2016 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pemeriksa Siswazah Ijazah Sarjana Sains , 31-03-2016 sehingga 31-03-2016 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Pemilih Pelantikan Pensyarah Gred 45/51P/51/53 , DG 41, DH41 2023 , 01-01-2023 sehingga 31-12-2023 , Universiti |
| Jawatankuasa Penasihat Makmal Bioserasi , 01-02-2020 sehingga 31-01-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Penerbitan Dokumen Pengajian Siswazah UKM , 16-11-2018 sehingga 15-11-2019 , Universiti |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Kejuruteraan Mekanikal JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Pengurusan Teknologi Industri JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Penyelidikan dan Inovasi II , 10-04-2018 sehingga 09-04-2021 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Peperiksaan Lisan Bil. 12/2018 (P.Mekanik) , 22-03-2018 sehingga 22-03-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 17/2019 (P.Mercu) , 03-07-2019 sehingga 03-07-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 28/2019 (P.Mercu) , 09-10-2019 sehingga 09-10-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 38/2019 (P.KMP) , 12-12-2019 sehingga 12-12-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 42/2017 (P) , 30-05-2017 sehingga 30-05-2017 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 6/2017 (M) , 30-03-2017 sehingga 30-03-2017 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 70/2017 (P) , 14-09-2017 sehingga 14-09-2017 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Postgraduate Seminar series 1/2019: How to write a research Proposal , 21-03-2019 sehingga 21-03-2019 , Universiti |
| Jawatankuasa Seminar Pascasiswazah Siri 2/2020: How to Write a Research Proposal , 22-01-2020 sehingga 22-01-2020 , Universiti |
| Jawatankuasa Siasatan Aduan Dalaman (AI2018-22) , 02-04-2020 sehingga 06-08-2020 , Universiti |
| Jawatankuasa Teras 1: Pensejagatan Perkhidmatan Kampus Digital Inklusif dan Bersepadu , 01-01-2022 sehingga 31-12-2025 , Universiti |
| Jawatankuasa Teras 2: Pemantapan Infrastruktur ICT dan Adaptasi IR 4.0 , 01-01-2022 sehingga 31-12-2025 , Universiti |
| KESUTRA , 01-01-2015 sehingga 31-12-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| MESYUARAT JAWATANKUASA PEMILIH PELANTIKAN JAWATAN PEGAWAI SAINS GRED C41 , 11-08-2021 sehingga 11-08-2021 , Universiti |
| Majalah Impak Siri 1/2020 , 01-01-2020 sehingga 31-12-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| PANEL PENILAI DALAMAN KERTAS CADANGAN PERMOHONAN DANA PENYELIDIKAN KEMENTERIAN PENGAJIAN TINGGI (KPT) SKIM GERAN PENYELIDIKAN FUNDAMENTAL (FRGS) TAHUN 2024 (FASA-1) , 30-11-2023 sehingga 07-12-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| PANEL PENILAI DANA INOVASI FASA 1/2021 BIL 1 , 14-04-2021 sehingga 14-04-2021 , Universiti |
| PANEL PENILAI PRGS 2.0 TAHUN 2020 , 16-07-2020 sehingga 15-07-2021 , Universiti |
| PANEL PENILAI SESI PEMBENTANGAN PERINGKAT UKM – PEMANTAUAN LAPORAN PRESTASI PROGRAM PENYELIDIKAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) BIL. 2/2022 , 18-01-2023 sehingga 18-01-2023 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA AD-HOC MEMBINCANGKAN KAEDAH PENENTUAN KOMPONEN BAGI PROJEK PENYELIDIKAN YANG DIDAFTARKAN DALAM SMPU , 26-07-2021 sehingga 26-07-2021 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2023 , 18-03-2023 sehingga 31-12-2023 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENDIDIKAN TINGGI (DP KPT) TAHUN 2024 , 16-12-2023 sehingga 31-12-2024 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENGAJIAN TINGGI (DP KPT) TAHUN 2021 , 01-01-2021 sehingga 31-12-2021 , Universiti |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENILAIAN DI BAWAH DANA PENYELIDIKAN KEMENTERIAN PENGAJIAN TINGGI (DP KPT) TAHUN 2022 , 24-03-2022 sehingga 31-12-2022 , Universiti |
| PELANTIKAN SEBAGAI AHLI PANEL PENILAI PERINGKAT UNIVERSITI KEBANGSAAN MALAYSIA (UKM) - SKIM GERAN PENYELIDIKAN FUNDAMENTAL (FRGS) FASA 1/2019 , 15-01-2019 sehingga 11-04-2019 , Universiti |
| PELANTIKAN SEBAGAI PANEL PENILAI DANA PENYELIDIKAN PERINGKAT FAKULTI , 02-05-2024 sehingga 01-05-2027 , Fakulti / Institut / Pusat Perkhidmatan |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 INSTITUT SEL FUEL BAGI SEMESTER 2SESI AKADEMIK 2020/2021 , 04-08-2021 sehingga 05-08-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| PERSIDANGAN DAN EKSPO CIPTAAN INSTITUSI PENGAJIAN TINGGI ANTARABANGSA TAHUN 2022 (PECIPTA’22) , 02-11-2022 sehingga 03-11-2022 , Universiti |
| Panel Penilai Dalaman Kertas Cadangan Permohonan Geran Penyelidikan di bawah Dana Universiti Penyelidikan (UP) Tahun 2024 DIP 2.0 , 16-05-2024 sehingga 31-05-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Dalaman Kertas Cadangan Permohonan Geran Penyelidikan di bawah Dana Universiti Penyelidikan (UP) Tahun 2024 GGPM , 16-05-2024 sehingga 31-05-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Dalaman Kertas Cadangan Permohonan Geran Penyelidikan di bawah Dana Universiti Penyelidikan (UP) Tahun 2024 GUP , 16-05-2024 sehingga 31-05-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2022 , 01-06-2022 sehingga 31-12-2022 , Universiti |
| Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2023 , 26-07-2023 sehingga 31-12-2023 , Universiti |
| Panel Penilai Geran Penyelidikan di bawah Dana UP Tahun 2024 , 30-07-2024 sehingga 31-12-2024 , Universiti |
| Panel Penilai Mesyuarat Jawatankuasa Penilaian Dana Inovasi Fasa 1/2023 - Bil 3 , 12-01-2024 sehingga 12-01-2024 , Universiti |
| Panel Penilai PRGS Fasa 1/2018 - Sistem MyGrants , 09-02-2018 sehingga 26-02-2018 , Universiti |
| Panel Penilai Permohonan Geran Universiti Penyelidikan (GUP) dan Geran Galakan Penyelidik Muda (GGPM) , 16-05-2018 sehingga 16-05-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Proposal RARA6014/RARA8014 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Pelantikan Sebagai Ahli Jawatankuasa Penilaian Program Dana Penyelidikan Kementerian Pengajian Tinggi (DP KPT) Tahun 2020 Peringkat Universiti Kebangsaan Malaysia , 01-01-2020 sehingga 31-12-2020 , Universiti |
| Pelantikan Sebagai Mentor & Panel Penilai Geran FRGS 2025 , 01-11-2024 sehingga 31-12-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Penilai Geran Penyelidikan di bawah Dana RU Tahun 2021 , 01-05-2021 sehingga 31-12-2021 , Universiti |
| Penilai Kolokium Siswazah 2023 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Penilaian Harga bagi Sebutharga Membekal, Menghantar dan Mengujilari Polymer Internal Mixer di FST , 13-10-2022 sehingga 13-10-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Retreat CRIM Tahun 2023 , 12-01-2023 sehingga 14-01-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Sistem Penarafan Universiti Sihat (HURS) UKM , 07-10-2022 sehingga 06-10-2024 , Universiti |
| Skim Geran Penyelidikan Pembanguan Prototype (PRGS) Fasa 1/2018 , 09-02-2018 sehingga 28-02-2018 , Universiti |
| THE NOVEL LOW TEMPERATURE PROCESSED BILAYER SILVER/TERNARY PEROXO-PEROVSKITE TRANSPARENT CONDUCTIVE OXIDE (TCO) THIN FILM , 26-11-2018 sehingga 26-11-2018 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Tenaga Pengajar dan Pelaksana "UKM-Hangzhou Dianzi University Mobility Program" 2018 , 23-07-2018 sehingga 17-08-2018 , Universiti |
| URUS SETIA AUDIT PENILAIAN TAPAK MYRA ® Tahun 2021 , 16-08-2022 sehingga 17-08-2022 , Universiti |
| URUS SETIA SESI AUDIT DALAMAN MALAYSIA RESEARCH ASSESSMENT (MyRA) PENILAIAN DATA TAHUN 2022 , 09-05-2023 sehingga 11-05-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Urus setia Bengkel Pelataan MyRA 2023 , 06-03-2023 sehingga 06-03-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Urus setia Majlis Anugerah Kecemerlangan MyRA Tahun 2023 , 14-12-2023 sehingga 14-12-2023 , Universiti |
| Urus setia Majlis Anugerah Kecemerlangan MyRA Tahun 2024 , 10-12-2024 sehingga 10-12-2024 , Universiti |