Untuk Kegunaan UKM sahaja
For UKM use only
| KIMIA DAN FIZIK BAHAN , Doktor Falsafah , KYUSHU UNIVERSITY, JEPUN , 2015 |
| Sarjana , UKM , 2010 |
| Sarjana Muda , USM , 2000 |
| TECHNOLOGY AND ENGINEERING - MATERIAL AND POLYMER (Severe plastic deformation, metallurgy) |
| PURE AND APPLIED SCIENCES - MATERIALS SCIENCE (Nanostructured materials) |
| TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (Failure analysis-Materials failure, fracture mechanics) |
| Ahmad Muhammad Aziz, Intan Fadhlina Mohamed, Zenji Horita, Mohd Zaidi Omar, Zainuddin Sajuri, Norinsan Kamil Othman, Junaidi Syarif, Mohamed Abdelgawad Gebril, Farhad Ostovan, Seungwon Lee, Kenji Matsuda, Manabu Yumoto, Yoichi Takizawa, Ammar Abdulkareem. (2024). Strengthening Of A5052 Aluminum Alloy By High-pressure Sliding Process. - Journal Of Materials Science. 5754-5770. |
| Afifah Md Ali, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Mohd Shukor Salleh, Hanizam Hashim, Nur Farah Bazilah Wakhi Anuar. (2024). Effect Of Heat Treatment On The Microstructures And Mechanical Properties Of Thixoformed Graphene-reinforced Aluminium Alloy Composite. - International Journal Of Metalcasting. 1695-1709. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman, Dawod Mohamed Elabar, Farag Ibrahim Haider, Saziana Samat And Osama M. Irfan. (2023). Effect Of Semisolid And Heat Treatment Process On Microstructural Refinement Of Al-7si Alloy. - Materials. 1-13. |
| Fathin Iliana Jamhari. Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Nashrah Hani Jamadon, Kim Seah Tan. (2023). Influence Of Heat Treatment Parameters On Microstructure And Mechanical Performance Of Titanium Alloy In Lpbf: A Brief Review. - Journal Of Materials Research & Technology. 4091-4110. |
| Takahiro Masuda, Yongpeng Tang, Intan Fadhlina Mohamed, Zenji Horita. (2023). Ultrafine-grained Az61 Alloy Produced By High-pressure Torsion: Advent Of Superplasticity And Effect Of Anisotropy. - Materials Science And Engineering: A. 1-9. |
| Mohd Rhafiq Mazlan, Nashrah Hani Jamadon, Armin Rajabi, Abu Bakar Sulong, Intan Fadhlina Mohamed, Farazila Yusof, Nur Ayuni Jamal. (2023). Necking Mechanism Under Various Sintering Process Parameters - A Review. - Journal Of Materials Research And Technology - Jmr&t. 2189-2201. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman, Ahmad Muhammad Aziz, Osama M. Irfan. (2023). The Microstructural Refinement Of The A356 Alloy Using Semi-solid And Severe Plastic-deformation Processing. - Metals. 1-24. |
| Nuramilawahida Mat Ropi, Hawa Hishamuddin, Dzuraidah Abd Wahab, Wakhid Ahmad Jauhari, Fatin Amrina A. Rashid, Nor Kamaliana Khamis, Intan Fadhlina Mohamed, Mohd Anas Mohd Sabri, Mohd Radzi Abu Mansor. (2023). Optimal Lot-sizing Decisions For A Remanufacturing Production System Under Spare Parts Supply Disruption. - Mathematics. 4053-4072. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman And Osama M. Irfan. (2022). Combining Heat Treatment And High-pressure Torsion To Enhance The Hardness And Corrosion Resistance Of A356 Alloy. - Metals. 1-12. |
| Mohammad Azlan Aripin, Zainuddin Sajuri, Nashrah Hani Jamadon, Amir Hossein Baghdadi, Junaidi Syarif, Intan Fadhlina Mohamed And Ahmad Muhammad Aziz. (2022). Effects Of Build Orientations On Microstructure Evolution, Porosity Formation, And Mechanical Performance Of Selective Laser Melted 17-4 Ph Stainless Steel. - Metals. 1-24. |
| Afifah Md Ali, Mohd Zaidi Omar, Mohd Shukor Salleh, Hanizam Hashim, Intan Fadhlina Mohamed, Nur Farah Bazilah Wakhi Anuar. (2022). Mechanical Behaviour And Morphology Of Thixoformed Aluminium Alloy Reinforced By Graphene. - Materials. 1-15. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman And Osama M. Irfan. (2022). Microstructure Refinement By A Combination Of Heat Treatment And Thixoforming Process Followed By Severe Plastic Deformation And Their Effects On Al-si Alloy Hardness. - Metals. 1-15. |
| Junaidi Syarif, Amro Altoyuri, Intan Fadhlina Mohamed. (2022). Equal Channel Angular Pressing Of Single Crystal Aluminum: A Molecular Dynamics Simulation. - Journal Of Materials Research And Technology. 888-897. |
| Esmaeil Amiri, Farhad Ostovan, Meysam Toozandehjani, Ehsan Shafiei, Intan Fadhlina Mohamed. (2021). Study And Selection Of Most Appropriate Filler Rod For Gtaw Of S32750 Super Duplex Steel Joints: A Comprehensive Study On Microstructural, Mechanical And Corrosion Properties. - Materials Chemistry And Physics. 1-12. |
| Farhad Ostovan, Ehsan Shafiei, Meysam Toozandehjani, Intan Fadhlina Mohamed, Masoud Soltani. (2021). On The Role Of Molybdenum On The Microstructural,mechanical And Corrosion Properties Of The Gtawaisi 316 Stainless Steel Welds. - Journal Of Materials Research And Technology. 2115-2125. |
| Saziana Samat, Mohd Zaidi Omar, Amir Hossein Baghdadi, Intan Fadhlina Mohamed, Ahmad Muhammad Aziz. (2021). Mechanical Properties And Microstructures Of A Modified Al-si-cu Alloy Prepared By Thixoforming Process For Automotive Connecting Rods. - Journal Of Materials Research And Technology. 1086-1102. |
| S. Samat, M.z. Omar, A.h. Baghdadi, I.f. Mohamed, A. Rajabi, A.m. Aziz. (2021). Microstructural Evolution, Dislocation Density And Tensile Properties Of Al-6.5si-2.1cu-0.35mg Alloy Produced By Different Casting Processes. - Journal Of Materials Science And Technology. 145-157. |
| Armin Rajabi, Mariyam Jameelah Ghazali, Intan Fadhlina Mohamed, Norhamidi Muhamad. (2020). Novel Precursor Of Nitrogen For The Synthesis Of Tic0.7n0.3 Through Vacuum Oven-induced Combustion. - Ceramics International. 9271-9280. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman. (2019). Microstructural Evaluation And Corrosion Resistance Of Semisolid Cast A356 Alloy Processed By Equal Channel Angular Pressing. - Metals. 1-15. |
| Intan Fadhlina Mohamed, Takahiro Masuda, Seungwon Lee, Kaveh Edalati, Zenji Horita, Shoichi Hirosawa, Kenji Matsuda, Daisuke Terada, Mohd Zaidi Omar. (2017). Strengthening Of A2024 Alloy By High Pressure Torsion And Subsequent Aging. - Journal Of Materials Science And Engineering A. 112-118. |
| Takuya Komatsu, Takahiro Masuda, Yongpeng Tang, Intan Fadhlina Mohamed, Manabu Yumoto, Yoichi Takizawa And Zenji Horita. (2023). Production Of Ultrafine-grained Aluminum Alloys In Upsized Sheets Using Process Of Incremental Feeding High-pressure Sliding (if-hps). - Material Transactions. 436-442. |
| Mohammad Azlan Aripin, Zainuddin Sajuri, Nashrah Hani Jamadon, Amir Hossein Baghdadi, Intan Fadhlina Mohamed, Junaidi Syarif, Ahmad Muhammad Aziz, Fathin Iliana Jamhari. (2023). Microstructure And Mechanical Properties Of Selective Laser Melted 17-4 Ph Stainless Steel; Build Direction And Heat Treatment Processes. - Materials Today Communications. 1-13. |
| Afifah Md Ali, Mohd Zaidi Omar, Hanizam Hashim, Mohd Shukor Salleh And Intan Fadhlina Mohamed. (2021). Recent Development In Graphene-reinforced Aluminium Matrix Composite: A Review. - Reviews On Advanced Materials Science. 801-817. |
| Saziana Samat, Mohd Zaidi Omar, Intan Fadhlina Mohamed. (2019). High-frequency Induction Heating Of Al-si-cu-mg Aluminium Alloy In Thixoforming. - Materials Research. 1-13. |
| Saziana Samat, Mohd Zaidi Omar And Intan Fadhlina Mohamed. (2019). Effect Of Feedstock Geometry On The Semisolid Processing Of Al-si-cu-mg Alloy. - Materials Research Express. 1-11. |
| M.a. Gebril, M.z. Omar, N.k. Othman & I.f. Mohamed. (2019). Microstructural Refinement And Corrosion Resistance Improvement Of Heat-treated A356 Alloy Processed By Equal Channel Angular Pressing. - Sains Malaysiana. 2749-2757. |
| Mohamed A. Gebril, M. Zaidi. Omar, Nk. Othman & I.f. Mohamed. (2019). Effect Of Equal Channel Angular Pressing Processing Routes On Corrosion Resistance And Hardness Of Heat Treated A356 Alloy. - Sains Malaysiana. 661-668. |
| Najla Nazihah Mas'ood, Farhana Mohd Foudzi, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farrahshaida Mohd Salleh, Ukwueze Bonaventure Emeka. (2018). Two Component Materials In Powder Metallurgy: A Review Paper Focused On The Processing Technique Applied In Powder Metallurgy. - Jurnal Kejuruteraan. 23-31. |
| Ahmad Muhammad Aziz, Intan Fadhlina Mohamed, Zenji Horita, Mohd Zaidi Omar, Zainuddin Sajuri, Norinsan Kamil Othman, Junaidi Syarif, Mohamed Abdelgawad Gebril, Farhad Ostovan, Seungwon Lee, Kenji Matsuda, Manabu Yumoto, Yoichi Takizawa, Ammar Abdulkareem. (2024). Strengthening Of A5052 Aluminum Alloy By High-pressure Sliding Process. - Journal Of Materials Science. 5754-5770. |
| Afifah Md Ali, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Mohd Shukor Salleh, Hanizam Hashim, Nur Farah Bazilah Wakhi Anuar. (2024). Effect Of Heat Treatment On The Microstructures And Mechanical Properties Of Thixoformed Graphene-reinforced Aluminium Alloy Composite. - International Journal Of Metalcasting. 1695-1709. |
| Fathin Iliana Jamhari. Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Nashrah Hani Jamadon, Kim Seah Tan. (2023). Influence Of Heat Treatment Parameters On Microstructure And Mechanical Performance Of Titanium Alloy In Lpbf: A Brief Review. - Journal Of Materials Research & Technology. 4091-4110. |
| Fathin Iliana Jamhari, Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Norhamidi Muhamad, Intan Fadhlina Mohamed, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan. (2023). Impact Of Hot Isostatic Pressing On Surface Quality, Porosity And Performance Of Ti6al4v Manufactured By Laser Powder Bed Fusion: A Brief Review. - Jurnal Tribologi. 1-15. |
| Takuya Komatsu, Takahiro Masuda, Yongpeng Tang, Intan Fadhlina Mohamed, Manabu Yumoto, Yoichi Takizawa And Zenji Horita. (2023). Production Of Ultrafine-grained Aluminum Alloys In Upsized Sheets Using Process Of Incremental Feeding High-pressure Sliding (if-hps). - Material Transactions. 436-442. |
| Mohd Rhafiq Mazlan, Nashrah Hani Jamadon, Armin Rajabi, Abu Bakar Sulong, Intan Fadhlina Mohamed, Farazila Yusof, Nur Ayuni Jamal. (2023). Necking Mechanism Under Various Sintering Process Parameters - A Review. - Journal Of Materials Research And Technology - Jmr&t. 2189-2201. |
| A. Md Ali, M.z. Omar, M.s. Salleh, I.f. Mohamed, N.f.b Wakhi Anuar. (2023). Investigation Of The Mechanical Properties And Microstructure Of Graphene-aluminium Alloy Composite Fabricated By Stir Casting Process. - Materials Science Forum. 3-8. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman, Ahmad Muhammad Aziz, Osama M. Irfan. (2023). The Microstructural Refinement Of The A356 Alloy Using Semi-solid And Severe Plastic-deformation Processing. - Metals. 1-24. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman, Dawod Mohamed Elabar, Farag Ibrahim Haider, Saziana Samat And Osama M. Irfan. (2023). Effect Of Semisolid And Heat Treatment Process On Microstructural Refinement Of Al-7si Alloy. - Materials. 1-13. |
| Nuramilawahida Mat Ropi, Hawa Hishamuddin, Dzuraidah Abd Wahab, Wakhid Ahmad Jauhari, Fatin Amrina A. Rashid, Nor Kamaliana Khamis, Intan Fadhlina Mohamed, Mohd Anas Mohd Sabri, Mohd Radzi Abu Mansor. (2023). Optimal Lot-sizing Decisions For A Remanufacturing Production System Under Spare Parts Supply Disruption. - Mathematics. 4053-4072. |
| Minhalina Ahmad Buhairi, Farhana Mohd Foudzi, Fathin Iliana Jamhari, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Abdul Hadi Azman, Wan Sharuzi Wan Harun, Msh Al-furjan. (2023). Review On Volumetric Energy Density: Influence On Morphology And Mechanical Properties Of Ti6al4v Manufactured Via Laser Powder Bed Fusion. - Progress In Additive Manufacturing. 265-283. |
| Mohammad Azlan Aripin, Zainuddin Sajuri, Nashrah Hani Jamadon, Amir Hossein Baghdadi, Intan Fadhlina Mohamed, Junaidi Syarif, Ahmad Muhammad Aziz, Fathin Iliana Jamhari. (2023). Microstructure And Mechanical Properties Of Selective Laser Melted 17-4 Ph Stainless Steel; Build Direction And Heat Treatment Processes. - Materials Today Communications. 1-13. |
| Takahiro Masuda, Yongpeng Tang, Intan Fadhlina Mohamed, Zenji Horita. (2023). Ultrafine-grained Az61 Alloy Produced By High-pressure Torsion: Advent Of Superplasticity And Effect Of Anisotropy. - Materials Science And Engineering: A. 1-9. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman And Osama M. Irfan. (2022). Microstructure Refinement By A Combination Of Heat Treatment And Thixoforming Process Followed By Severe Plastic Deformation And Their Effects On Al-si Alloy Hardness. - Metals. 1-15. |
| M.a. Fauthan, S. Abdullah,m.f. Abdullah, I.f. Mohamed. (2022). Multiple Linear Regression Parameters For Determining Fatigue-based Entropy Characterisation Of Magnesium Alloy. - Frattura Ed Integrita Strutturale. 289-303. |
| Mohammad Azlan Aripin, Zainuddin Sajuri, Nashrah Hani Jamadon, Amir Hossein Baghdadi, Junaidi Syarif, Intan Fadhlina Mohamed And Ahmad Muhammad Aziz. (2022). Effects Of Build Orientations On Microstructure Evolution, Porosity Formation, And Mechanical Performance Of Selective Laser Melted 17-4 Ph Stainless Steel. - Metals. 1-24. |
| Junaidi Syarif, Amro Altoyuri, Intan Fadhlina Mohamed. (2022). Equal Channel Angular Pressing Of Single Crystal Aluminum: A Molecular Dynamics Simulation. - Journal Of Materials Research And Technology. 888-897. |
| Afifah Md Ali, Mohd Zaidi Omar, Mohd Shukor Salleh, Hanizam Hashim, Intan Fadhlina Mohamed, Nur Farah Bazilah Wakhi Anuar. (2022). Mechanical Behaviour And Morphology Of Thixoformed Aluminium Alloy Reinforced By Graphene. - Materials. 1-15. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman And Osama M. Irfan. (2022). Combining Heat Treatment And High-pressure Torsion To Enhance The Hardness And Corrosion Resistance Of A356 Alloy. - Metals. 1-12. |
| N.j. Suang, W.f.h. W. Zamri, M.f.m. Din, A. Shamsudeen, I. F. Mohamed, A.k. Ariffin. (2021). Effects Of Layer Addition On Hardness Of A Multi-layered Tialn And Tin Coating. - Solid State Technology. 7339-7351. |
| Afifah Md Ali, Mohd Zaidi Omar, Hanizam Hashim, Mohd Shukor Salleh And Intan Fadhlina Mohamed. (2021). Recent Development In Graphene-reinforced Aluminium Matrix Composite: A Review. - Reviews On Advanced Materials Science. 801-817. |
| S. Samat, M.z. Omar, A.h. Baghdadi, I.f. Mohamed, A. Rajabi, A.m. Aziz. (2021). Microstructural Evolution, Dislocation Density And Tensile Properties Of Al-6.5si-2.1cu-0.35mg Alloy Produced By Different Casting Processes. - Journal Of Materials Science And Technology. 145-157. |
| Leong Chee Yau, Wan Fathul Hakim W. Zamri, Muhammad Faiz Md Din, Ahmad Kamal Ariffin, Intan Fadhlina Mohamed. (2021). Influences Of Coefficient Of Frictions On The Contact Behavior For Ball Bearings. - Solid State Technology. 4387-4394. |
| Saziana Samat, Mohd Zaidi Omar, Amir Hossein Baghdadi, Intan Fadhlina Mohamed, Ahmad Muhammad Aziz. (2021). Mechanical Properties And Microstructures Of A Modified Al-si-cu Alloy Prepared By Thixoforming Process For Automotive Connecting Rods. - Journal Of Materials Research And Technology. 1086-1102. |
| Farhad Ostovan, Ehsan Shafiei, Meysam Toozandehjani, Intan Fadhlina Mohamed, Masoud Soltani. (2021). On The Role Of Molybdenum On The Microstructural,mechanical And Corrosion Properties Of The Gtawaisi 316 Stainless Steel Welds. - Journal Of Materials Research And Technology. 2115-2125. |
| Esmaeil Amiri, Farhad Ostovan, Meysam Toozandehjani, Ehsan Shafiei, Intan Fadhlina Mohamed. (2021). Study And Selection Of Most Appropriate Filler Rod For Gtaw Of S32750 Super Duplex Steel Joints: A Comprehensive Study On Microstructural, Mechanical And Corrosion Properties. - Materials Chemistry And Physics. 1-12. |
| Muhamad Isyraf Bin Aznam, Wan Fathul Hakim W Zamri, Ahmad Kamal Ariffin, Muhammad Faiz Md Din, Intan Fadhlina Mohamed, Guanyu Deng. (2020). The Effect Of Tialn-based And Alcrn-based Coatings Towards Mechanical Properties On Punch Tools Using Finite Element Method. - Jurnal Tribologi. 65-79. |
| Armin Rajabi, Mariyam Jameelah Ghazali, Intan Fadhlina Mohamed, Norhamidi Muhamad. (2020). Novel Precursor Of Nitrogen For The Synthesis Of Tic0.7n0.3 Through Vacuum Oven-induced Combustion. - Ceramics International. 9271-9280. |
| Leong Chee Yau, Wan Fathul Hakim W. Zamri, Intan Fadhlina Mohamed, Ahmad Kamal Ariffin, Muhammad Faiz Md Din. (2020). An Elasto-plastic Ball Bearing Contact With Bilinear Hardening. - International Journal Of Innovative Technology And Exploring Engineering. 438-445. |
| Saziana Samat, Mohd Zaidi Omar, Intan Fadhlina Mohamed. (2019). High-frequency Induction Heating Of Al-si-cu-mg Aluminium Alloy In Thixoforming. - Materials Research. 1-13. |
| Saziana Samat, Mohd Zaidi Omar And Intan Fadhlina Mohamed. (2019). Effect Of Feedstock Geometry On The Semisolid Processing Of Al-si-cu-mg Alloy. - Materials Research Express. 1-11. |
| Mohamed A. Gebril, M. Zaidi. Omar, Nk. Othman & I.f. Mohamed. (2019). Effect Of Equal Channel Angular Pressing Processing Routes On Corrosion Resistance And Hardness Of Heat Treated A356 Alloy. - Sains Malaysiana. 661-668. |
| M.a. Gebril, M.z. Omar, N.k. Othman & I.f. Mohamed. (2019). Microstructural Refinement And Corrosion Resistance Improvement Of Heat-treated A356 Alloy Processed By Equal Channel Angular Pressing. - Sains Malaysiana. 2749-2757. |
| Wan Fathul Hakim W Zamri, Ng Jie Suang, Intan Fadhlina Mohamed, Ahmad Kamal Ariffin, Muhammad Faiz Md Din. (2019). Modelling Of Nanoindentation Of Tialn And Tin Thin Film Coatings For Automotive Bearing. - International Journal Of Recent Technology And Engineering (ijrte). 7197-7199. |
| Mohamed Abdelgawad Gebril, Mohd Zaidi Omar, Intan Fadhlina Mohamed, Norinsan Kamil Othman. (2019). Microstructural Evaluation And Corrosion Resistance Of Semisolid Cast A356 Alloy Processed By Equal Channel Angular Pressing. - Metals. 1-15. |
| Najlaa Nazihah Mas'ood, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farhana Mohd Foudzi, Mohd Ikram Ramli, Farrahshaida Mohd Salleh. (2018). Flow Behavior And Injectability Of Ss17-4ph With Ps And Pe Binders In Powder Injection Molding. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. . |
| Wan Fathul Hakim W.zamri, Intan Fadhlina Mohamed, Khairunas Bakri, Muhamad Faiz Md Din. (2018). Simulation Of Nanoindentation Of Single And Multiple Coating Layers For Automotive Bearings. - International Journal Of Engineering & Technology. . |
| Najla Nazihah Mas'ood, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farhana Mohd Foudzi, Mohd Ikram Ramli, Farrahshaida Mohd Salleh. (2018). Flow Behavior And Injectability Of Ss17-4ph With Ps And Pe Binders In Powder Injection Molding. - Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences. 121-125. |
| Farrahshaida Mohd Salleh, Abu Bakar Sulong, Farhana Mohd Foudzi, Intan Fadhlina Mohamed, Natasha Emira Azaman, Najla Nazihah Mas'ood, Seong Jin Park. (2017). Flow Behavior Characterization Of Hydroxyapatite For Powder Injection Molding (pim). - Journal Of Mechanical Engineering. 77-88. |
| Siti Fatimah Hassan, Wan Fathul Hakim W Zamri, Intan Fadhlina Mohamed, Wan Aizon Wan Ghopa, Muhammad Faiz Md Din. (2017). Influence Of Bilayer Structure And Sublayer Distance On The Hardness Of Multilayer Thin Film Tialn And Crn. - Journal Of Mechanical Engineering. 201-212. |
| Intan Fadhlina Mohamed, Takahiro Masuda, Seungwon Lee, Kaveh Edalati, Zenji Horita, Shoichi Hirosawa, Kenji Matsuda, Daisuke Terada, Mohd Zaidi Omar. (2017). Strengthening Of A2024 Alloy By High Pressure Torsion And Subsequent Aging. - Journal Of Materials Science And Engineering A. 112-118. |
| Intan Fadhlina Mohamed, Seungwon Lee, Kaveh Edalati, Zenji Horita, Shahrum Abdullah, Mohd Zaidi Omar, Wan Fathul Hakim Wan Zamri. (2016). Grain Refinement And Microstructure Evolution In Aluminum A2618 Alloy By High Pressure Torsion. - Jurnal Teknologi. 149-152. |
| L. Joey, W. F. H. Zamri, M. F. M. Din, A. Shamsudeen, I. F. Mohamed. (2023). Inverse And Regression Methods In Determining The Mechanical Properties Of Tin And Tialn Thin Film Multi-layer Hierarchy Coatings On Automotive Bearings. - Aip Conference Proceedings. 1-8. |
| N. K. Khamis, Z. Wahid, I. F. Mohamed. (2023). Challenges In Coordinating And Conducting An Integrated Group Project In Mechanical Engineering During Covid-19 Pandemic Phase: A Case Study. - Aip Conference Proceedings. 30019. |
| M.a. Aripin, Z. Sajuri, J. Syarif, A.h. Baghdadi And I.f. Mohamed. (2022). Evaluation Of Microstructure And Porosity For 3d Printed Stainless Steel. - Materials Today: Proceedings. 3082-3086. |
| Balya Mulkan Wijaya Mohammad Yusuf, Ezzarhan Abdullah, Intan Fadhlina Mohamed. (2021). Performance Of Pre-fabricated Frame Scaffolds Falsework. - Proceedings Of The Sustainable Concrete Materials And Structures In Concrete Construction 2020. 215-227. |
| Mohd Zaidi Omar, Saziana Samat, Intan Fadhlina Mohamed. (2022). Pemprosesan Logam Separa Pepejal: Pendekatan Industri Automotif. - . 183. |
| Wan Fathul Hakim W. Zamri, Intan Fadhlina Mohamed, Chan Teng Neng, Muhamad Isyraf Aznam & Muhamad Faiz Md. Din. (2020). Mekanik Komputeran: Eksperimen Model Dan Simulasi. - . 19. |
| Nor Kamaliana Khamis, Mohd Faizal Mat Tahir, Abu Bakar Sulong, Zulkhairi Zainal Abidin, Intan Fadhlina Mohamad. (2020). Teori Dan Inovasi Pengajaran Dan Pembelajaran: Menyusuri Pandemik Covid-19. - . 10. |
| Wan Fathul Hakim W. Zamri, Intan Fadhlina Mohamed, Chan Teng Neng, Muhamad Isyraf Aznam & Muhamad Faiz Md. Din. (2020). Mekanik Komputeran: Eksperimen Model Dan Simulasi. - . 19. |
| Nor Kamaliana Khamis, Mohd Faizal Mat Tahir, Abu Bakar Sulong, Zulkhairi Zainal Abidin, Intan Fadhlina Mohamad. (2020). Teori Dan Inovasi Pengajaran Dan Pembelajaran: Menyusuri Pandemik Covid-19. - . 10. |
| W. F. H. W. Zamri, B. Kosasih, K. Tieu, M.f. Md. Din, I.f. Mohamed. (2018). Advances In Materials Processing And Integrity Metals And Semi-metallics. - . 22. |
| Mohd Zaidi Omar, Saziana Samat, Intan Fadhlina Mohamed. (2022). Pemprosesan Logam Separa Pepejal: Pendekatan Industri Automotif. - . 183. |
| Mohd. Zaidi Bin Omar;abu Bakar Bin Sulong;zainuddin Bin Sajuri;intan Fadhlina Binti Mohamed. (2023). Mechanical Properties And Microstructural Evolution Of Thixoformed Graphene Nanosheets Reinforced Aluminium Alloy Matrix Composites. - . . |
| Wan Fathul Hakim Bin W. Zamri;mariyam Jameelah Binti Ghazali;mohd Faizal Bin Mat Tahir;abdul Hadi Bin Azman;intan Fadhlina Binti Mohamed. (2022). Sifat Mekanik, Prestasi Dan Mod Kegagalan Salutan Berlapis Pada Gelang Omboh. - . . |
| Intan Fadhlina Binti Mohamed;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;zainuddin Bin Sajuri;wan Fathul Hakim Bin W. Zamri;nashrah Hani Binti Jamadon. (2022). Giant Straining Of Highly Commercial Aluminum Alloys Via High-pressure Torsion Process For Vehicle Applications. - . . |
| Wan Fathul Hakim Bin W. Zamri;jaharah Bt. A Ghani;intan Fadhlina Binti Mohamed. (2022). Mechanical And Tribological Properties Of Multilayer Coatings With A Hierarchical Architecture For The Metal Forming Industry. - . . |
| Mohd. Zaidi Bin Omar;zainuddin Bin Sajuri;intan Fadhlina Binti Mohamed. (2022). Effect Of Equal Channel Angular Pressing On Microstructural Development And Tensile Properties Of Er-modified Al-15%mg2si Metal Matrix Composite. - . . |
| Intan Fadhlina Binti Mohamed;ahmad Kamal Ariffin Bin Mohd Ihsan;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;wan Fathul Hakim Bin W. Zamri. (2022). Extra Superplasticity Of Aa2618 Alloy Processed By High-pressure Torsion. - . . |
| N K Khamis, Z Wahid And I F Mohamed. (2021). Challenges In Coordinating And Conducting An Integrated Group Project In Mechanical Engineering During Covid-19 Pandemic Phase. - International Conference N Technical And Vocational Education & Training (icontvet). 206. |
| L. Joey, W F H Zamri, M F M Din, A Shamsudeen, And I. F. Mohamed. (2021). Inverse And Regression Methods In Determining The Mechanical Properties Of Tin And Tialn Thin Film Multi Layer Hierarchy Coatings On Automotive Bearings. - International Conference On Manufacturing Technology-iconmet 2021. 1-8. |
| Beh Tek Loom 1 , Wan Fathul Hakim W. Zamri 1,* , Muhamad Faiz Md Din 2 , Intan Fadhlina Mohamed 1 & Azhari Shamsudeen 1. (2021). New Modeling Of The Influence Of Coating On The Contact Surface Of Ball Bearings. - Virtual Conference On Computational And Experimental Mechanics. 1-26. |
| Mariyam Jameelah Binti Ghazali;norhamidi Bin Muhamad;intan Fadhlina Binti Mohamed. (2021). Facile In-situ Casting Technique Of Fe-tic For Industries. - . . |
| Mariyam Jameelah Binti Ghazali;mohammad Rasidi Bin Mohammad Rasani;wan Fathul Hakim Bin W. Zamri;intan Fadhlina Binti Mohamed;armin Rajabi Nasirabadi. (2021). Wear Analyses Of Thermal Sprayed Tic/crc Coated Nickel Based Superalloys In Gas Turbines.. - . . |
| L. Joey1, *w F H Zamri1,2, M F M Din3, A Shamsudeen1 And I. F. Mohamed1. (2021). Inverse And Regression Methods In Determining The Mechanical Properties Of Tin And Tialn Thin Film Multi-layer Hierarchy Coatings On Automotive Bearings. - Iconmet 2021 1st International Conference On Manufacturing Engineering Technology 2021. 1-18. |
| Zainuddin Sajuri, Intan Fadhlina Mohamed. (2020). Analisis Fraktografi Dan Metalografi Bagi Struktur Header Steel Duplex. - . 1-33. |
| Norhamidi Bin Muhamad;abu Bakar Bin Sulong;zainuddin Bin Sajuri;zaliha Binti Wahid;intan Fadhlina Binti Mohamed;farhana Binti Mohd Foudzi. (2020). Magnetic – Non-magenetic Layered Bi-material Through Co-powder Injection Moulding (co-pim). - . . |
| Nor Kamaliana Khamis, Abu Bakar Sulong, Zulkhairi Zainal Abidin, Intan Fadhlina Mohamad, Mohd Faizal Mat Tahir. (2020). Perbandingan Kompetensi Dalam Akademik Dan Prestasi Dalam Projek Berkumpulan: Satu Kajian Kes. - K-novasi 2020. 1-13. |
| Zainuddin Bin Sajuri;che Husna Bt. Azhari;andanastuti Muchtar;rozli Bin Zulkifli;mohd. Zaidi Bin Omar;shahrum Bin Abdullah;mariyam Jameelah Binti Ghazali;abu Bakar Bin Sulong;intan Fadhlina Binti Mohamed. (2020). Development Of Light Weight Materials For Ballistic Applications In Tropical Climates. - . . |
| Muhamad Isyraf Bin Aznam, Wan Fathul Hakim W Zamri, Muhammad Faiz Md Din, Intan Fadhlina Mohamed, Guanyu Deng, Ahmad Kamal Ariffin Mohd Ihsan. (2019). Simulation Of Nanoindentation On Thin Single Layers Of Tialn And Alcrn For Piercing And Blanking Tools. - 22nd International Conference On Advances In Materials & Processing Technologies. 130. |
| Muhamad Isyraf Bin Aznam, Wan Fathul Hakim W Zamri, Ahmad Kamal Ariffin, Muhammad Faiz Md Din, Intan Fadhlina Mohamed, Guanyu Deng. (2019). The Effect Of Tialn-based And Alcrn-based Coatings Towards Mechanical Properties On Punch Tools. - 6th International Conference On Advanced Processes And Systems In Manufacturing (apsim 2019). 28. |
| Wan Fathul Hakim W.zamri, Intan Fadhlina Mohamed, Muhamad Faiz Md Din & Khairunas Bakri. (2017). Simulation Of Nanoindentation Of Single And Multiple Coating Layers For Automotive Bearings. - 4th International Conference On Recent Advances In Automotive Engineering & Mobility Research (recar). . |
| Precision Control of High-Pressure Sliding Parameter for Magnesium Alloys , Ketua Projek , 01-04-2024 sehingga 31-03-2025 , Antarabangsa |
| Solute-dislocation interaction in altering slip-plane activation at high temperature operation by severe plastic deformation process , Ketua Projek , 01-10-2022 sehingga 30-09-2024 , Universiti |
| Extra superplasticity of AA2618 alloy processed by high-pressure torsion , Ketua Projek , 15-11-2018 sehingga 14-05-2021 , Universiti |
| Giant Straining of Highly Commercial Aluminum Alloys via High-pressure Torsion Process for Vehicle Applications , Ketua Projek , 01-08-2016 sehingga 31-10-2020 , Kebangsaan |
| Extra strengthening in nanostructured AA2618 alloy by high-pressure torsion and post-aging treatment , Ketua Projek , 01-05-2016 sehingga 31-10-2017 , Universiti |
| Kesan rawatan haba dan pembentukan-tikso terhadap sifat mekanikal dan redaman aloi Al-Si-Cu-Mg (Effect of heat treatment and thixoforming on damping and mechanical properties of Al-Si-Cu-Mg alloys) , Penyelidik Bersama , 16-03-2023 sehingga 15-09-2024 , Universiti |
| Hybrid Composites Joint as In Situ Strengthening Mechanism for Friction Stir Welding of Aluminium Alloys , Penyelidik Bersama , 01-09-2021 sehingga 31-08-2023 , Universiti |
| Nano-micro Bi-modal Powder Interaction on the Bonding Mechanism of Metal-Metal Bi-Material Formed by Two-Component Bi-Modal Micro-Powder Injection Moulding (2C-2M-µPIM) , Penyelidik Bersama , 01-08-2020 sehingga 31-07-2023 , Universiti |
| Comfortable Coverall PPE Suit for Protecting Frontliners from Infectious COVID-19 Disease , Penyelidik Bersama , 01-08-2020 sehingga 31-01-2022 , Universiti |
| High-Temperature Tensile and Creep Behaviours of 316L Stainless Steel Fabricated by Additive Manufacturing , Penyelidik Bersama , 01-09-2019 sehingga 31-05-2023 , Kebangsaan |
| Mechanical Properties and Microstructural Evolution of Thixoformed Graphene Nanosheets Reinforced Aluminium Alloy Matrix Composites , Penyelidik Bersama , 01-09-2019 sehingga 30-11-2022 , Kebangsaan |
| Effect of Equal Channel Angular Pressing on microstructural development and tensile properties of Er-modified Al-15%Mg2Si metal matrix composite , Penyelidik Bersama , 24-06-2019 sehingga 23-03-2021 , Antarabangsa |
| Characterisations on wettability properties of laser textured ZnO/ TiO2 coatings for pipeline antifouling activities. , Penyelidik Bersama , 01-01-2019 sehingga 30-09-2022 , Kebangsaan |
| Facile in-situ casting technique of Fe-TiC for industries , Penyelidik Bersama , 14-12-2018 sehingga 13-06-2021 , Universiti |
| Sifat Mekanik, Prestasi dan Mod Kegagalan Salutan Berlapis Pada Gelang Omboh , Penyelidik Bersama , 15-11-2018 sehingga 14-11-2021 , Universiti |
| FEASIBILITY STUDY OF CRYOGENICS COOLING & CUTTING FOR OFFSHORE STRUCTURES , Penyelidik Bersama , 01-11-2018 sehingga 31-08-2019 , Kebangsaan |
| Wear Analyses Of Thermal Sprayed TiC/CrC Coated Nickel Based Superalloys in Gas Turbines. , Penyelidik Bersama , 15-08-2018 sehingga 14-05-2021 , Universiti |
| Development of Fixator Screw and Plate (Orthopedic Implant) using Novel Material of Composite Through Powder Injection Molding , Penyelidik Bersama , 01-02-2018 sehingga 31-01-2021 , Universiti |
| Mechanical and Tribological Properties of Multilayer Coatings with a Hierarchical Architecture for the Metal Forming Industry , Penyelidik Bersama , 15-08-2017 sehingga 14-11-2020 , Kebangsaan |
| Magnetic – Non-magenetic Layered Bi-material through Co-Powder Injection Moulding (Co-PIM) , Penyelidik Bersama , 24-10-2016 sehingga 23-10-2019 , Universiti |
| Characterization of Subsurface microstructure in cryogenic machining of alloy steel for Automotive Industry , Penyelidik Bersama , 01-08-2016 sehingga 31-01-2019 , Kebangsaan |
| Development of Light Weight Materials for Ballistic Applications in Tropical Climates , Penyelidik Bersama , 01-01-2016 sehingga 30-06-2018 , Kebangsaan |
| Development of Copper Graphene Composite , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| Structure-Property Relationship, Processing and Performance of Advanced Materials , Penyelidik Bersama , 15-06-2015 sehingga 30-09-2016 , Universiti |
| INVESTIGATING OF THE DURABILITY PERFORMANCE OF A LIGHTWEIGHT BALLISTIC RESISTANCE PANEL FOR ARMORED VEHICLES , Penyelidik Bersama , 01-01-2014 sehingga 21-02-2019 , Kebangsaan |
| IIDEX2023 , 2023 |
| KOH HOOI HOOI, Sarjana |
| ANALISIS DAN PENCIRIAN TEGANGAN KELULI ALOI 12-KROMIUM UNTUK KOMPONEN TEKANAN TINGGI DALAM TURBIN STIM, KAMAL BIN YUNOS @ JUNAS, Sarjana |
| KESAN DAN PENGOPTIMUMAN PARAMETER RAWATAN HABA KE ATAS PRESTASI ALOI TITANIUM MELALUI PROSES PELEBURAN LASER SELEKTIF, FATHIN ILIANA BINTI JAMHARI, Sarjana |
| NOOR FARIZAHANI BINTI HASSIN, Sarjana |
| EVOLUSI MIKROSTRUKTUR DAN SIFAT MEKANIKAL BAGI AA6061 MELALUI PROSES KILASAN TEKANAN TINGGI DENGAN PENGERASTUAAN, CHEERANAN KRUTSUWAN A/P NUPHAIRODE, Sarjana |
| Sifat Mekanik dan Kehausan Pad Filem Nipis Tunggal dan Berlapis TiN/SiC, SITI FATIMAH BT. HASSAN, Sarjana |
| Study Of Changes In Properties Of Steel/Al Sandwich Panel Against Ballistic Impact Using Signal Strain Processing Method, IZZA TIKA BINTI SAMIT @ ZAKARIA, Sarjana |
| NOOR ATIQAH BINTI BADALUDDIN, Sarjana |
| MOHAMMAD AZLAN BIN ARIPIN, Doktor Falsafah |
| PENCIRIAN MIKROSTRUKTUR DAN SIFAT MEKANIK KOMPOSIT A356-GRAFIN YANG DIKENAKAN PEMBENTUKAN TIKSO, AFIFAH BINTI MD ALI, Doktor Falsafah |
| AL-AMERI AMMAR ABDULKAREEM HASHIM, Doktor Falsafah |
| TANG JINGCHUAN, Doktor Falsafah |
| AHMAD MUHAMMAD BIN AZIZ, Doktor Falsafah |
| YOUSEF MOHD JABER ALI AL BADAWI, Doktor Falsafah |
| FORMULASI KELAKUAN PENGUATAN AA2024 KILAS TEKANAN TINGGI, FAUZIANA LAMIN, Doktor Falsafah |
| PENAMBAHBAIKAN RINTANGAN KAKISAN DAN PENGHALUSAN MIKROSTRUKTUR BAGI ALOI A356 MELALUI PEMPROSESAN SEPARA PEPEJAL DAN UBAHBENTUK PLASTIK TERUK, MOHAMED ABDELGAWAD MANSOUR GEBRIL, Doktor Falsafah |
| PENGACUAN SUNTIKAN SERAMIK HIDROSIAPATIT MENGGUNAKAN, FARRAHSHAIDA BINTI MOHD SALLEH, Doktor Falsafah |
| PROSES PENGACUANAN SUNTIKAN DWISERBUK BAGI KELULI TAHAN KARAT 17-4PH DAN 316L, NAJLAA NAZIHAH BINTI MAS`OOD, Doktor Falsafah |
| ANALISIS MIKROSTRUKTUR DAN SIFAT MEKANIK ALOI TERBENTUK TIKSO AL-SI-CU-MG, SAZIANA SAMAT, Doktor Falsafah |
| Predicting The Fatiguelives Fatique Crack Growth And Interaction Effects Of MSD Cracks For A New Developed Material Of Az31B, MOHD 'AKASHAH BIN FAUTHAN, Doktor Falsafah |
| Panel Temu Duga Biasiswa Kementerian Pengajian Tinggi , 24-05-2016 sehingga 24-05-2016 , Kebangsaan |
| Panel Hakim "The 27th International Invention, Innovation and Technology Exhibition (ITEX 2016)" , 12-05-2016 sehingga 14-05-2016 , Antarabangsa |
| Jawatankuasa Teknikal Penyediaan Malaysian Standard bagi Steel Bars, Wire rods dan Wire Products , 14-01-2018 sehingga 01-01-1970 , Kebangsaan |
| Materials Lecture Competition 2017 (MLC 2017) , 07-04-2017 sehingga 16-05-2017 , Kebangsaan |
| Profesor Pelawat , 01-02-2017 sehingga 31-05-2017 , Antarabangsa |
| Profesor Pelawat , 23-03-2020 sehingga 03-04-2020 , Antarabangsa |
| Lembaga Jurutera Malaysia , 18-06-2020 sehingga 31-12-2020 , Kebangsaan |
| EBSD study of the effect of route BC-ECAP on the homogeneity in Al-Si-Cu alloy, Journal of Metals and Materials International , 27-06-2020 sehingga 20-08-2020 , Antarabangsa |
| Al/Cu/Ti/Cu/Al interlayer reinforced Al matrix composite manufactured by accumulative roll bonding, Journal of Metals and Materials International , 10-01-2020 sehingga 02-02-2020 , Antarabangsa |
| 2nd International Research Invention, Innovation and Exhibition , 31-05-2022 sehingga 16-06-2022 , Antarabangsa |
| Panel EAC , 08-06-2022 sehingga 20-06-2032 , Kebangsaan |
| PEMERHATI BAGI LAWATAN AKREDITASI KE INSTITUSI PENGAJIAN TINGGI (IPT) UNIVERSITI SAINS MALAYSIA (USM) , 13-06-2023 sehingga 16-06-2023 , Kebangsaan |
| IIDEX2023 , 12-12-2023 sehingga 01-01-1970 , Antarabangsa |
| AJK PEMBANGUNAN TABLE 4 PROGRAM BAHARU , 22-07-2024 sehingga 24-07-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Bengkel Training of Trainers (TOT) , 22-08-2022 sehingga 23-08-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Gotong Royong Jabatan Kejuruteraan Mekanikal & Pembuatan , 25-09-2023 sehingga 25-09-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| JAWATANKUASA PENYEDIAAN DOKUMEN SEMAKAN PROGRAM SISWAZAH 2020 , 03-03-2020 sehingga 01-01-1970 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Audit Dalam SPK PPP UKM , 01-11-2022 sehingga 31-10-2025 , Universiti |
| Jawatankuasa Bengkel Training of Trainers Pendidikan Berasaskan Hasil , 22-08-2022 sehingga 23-08-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Gotong Royong Perdana Jabatan Kejuruteraan Mekanikal dan Pembuatan 2022 , 20-07-2022 sehingga 20-07-2022 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Gotong-Royong MAW 2024 JKMP, FKAB , 30-09-2024 sehingga 30-09-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Juruaudit Kendiri FKAB , 01-10-2024 sehingga 01-10-2026 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Juruaudit kendiri FKAB , 01-01-2022 sehingga 31-12-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Lawatan Latihan Industri Sesi 2023 , 14-08-2023 sehingga 11-10-2023 , Universiti |
| Jawatankuasa Lonjakan Jurutera Profesional , 30-04-2021 sehingga 29-04-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 07/2021 (P.JKMP) , 08-04-2021 sehingga 08-04-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 14/2019 (P.Mercu) , 05-04-2019 sehingga 05-04-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 17/2019 (P.Mercu) , 03-07-2019 sehingga 03-07-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 2/2019 (M.Mercu) , 22-03-2019 sehingga 22-03-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 31/2019 (P.Mercu) , 21-10-2019 sehingga 21-10-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 33/2019 (P.Mercu) , 24-10-2019 sehingga 24-10-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 4/2019 (M.Mercu) , 28-06-2019 sehingga 28-06-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 4/2022 (M.JKMP) , 01-04-2022 sehingga 01-04-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 9/2018 (P.Mercu) , 14-03-2018 sehingga 14-03-2018 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil.10/2023 (P.JKMP) , 28-08-2023 sehingga 28-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Persiapan Audit Kualiti Dalaman Bersepadu SPK PPPS FKAB Bagi Tahun 2020 , 15-10-2020 sehingga 12-11-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Persiapan bagi Audit Pensijilan Semula MS ISO 9001:2015 SPK PPPS UKM Oleh Sirim Qas International Sdn. Bhd Tahun 2021 , 01-02-2021 sehingga 25-03-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa SAR dan Akreditasi 2022 , 01-03-2021 sehingga 28-02-2023 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Seminar Pendidikan Kejuruteraan dan Alam Bina (PeKA 2016/2017) , 01-09-2016 sehingga 31-08-2017 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa UKM MLC 2021- 2022 , 01-01-2021 sehingga 31-12-2022 , Universiti |
| Jawatankuasa Unit Penambahbaikan Pengajaran dan Pembelajaran (UP3) JKMP , 01-03-2021 sehingga 28-02-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENYEDIAAN LAPORAN INTERIM PROGRAM SARJANA MUDA KEJURUTERAAN MEKANIKAL JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN , 10-07-2024 sehingga 09-08-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 INSTITUT SEL FUEL BAGI SEMESTER 2SESI AKADEMIK 2020/2021 , 04-08-2021 sehingga 05-08-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 SEMESTER 1 SESI AKADEMIK 2021/2022 , 15-02-2022 sehingga 16-02-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Panel Penilai Proposal RARA6014/RARA8014 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Pelantikan sebagai Urus Setia Majlis Anugerah Gemilang FKAB Tahun 2023 (MAGIKA 2023) , 09-06-2023 sehingga 09-06-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Pengawas Untuk Peperiksaan (Akhir) Bagi Program Sarjana Kerja Kursus Semester I Sesi 2019/2020 , 03-01-2020 sehingga 03-01-2020 , Fakulti / Institut / Pusat Perkhidmatan |
| Penilai Kolokium Siswazah 2023 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |