Untuk Kegunaan UKM sahaja
For UKM use only
| Sel Fuel , Doktor Falsafah , UKM , 2017 |
| Sarjana , UKM , 2013 |
| Sarjana Muda dengan Kepujian , UKM , 2011 |
| TECHNOLOGY AND ENGINEERING - MECHANICAL AND MANUFACTURING (additive manufacturing) |
| Nabilah Afiqah Mohd Radzuan, Farhana Mohd Foudzi, Abu Bakar Sulong, M. S. H. Al-furjan, Nishata Royan Rajendran Royan. (2024). Quick Insight Into The Dynamic Dimensions Of 4d Printing In Polymeric Composite Mechanics. - Reviews On Advanced Materials Science. 1-12. |
| Nabilah Afiqah Mohd Radzuan, Nisa Naima Khalid, Farhana Mohd Foudzi, Nishata Royan Rajendran Royan And Abu Bakar Sulong. (2023). Mechanical Analysis Of 3d Printed Polyamide Composites Under Different Filler Loadings. - Polymers. 1-11. |
| Fathin Iliana Jamhari. Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Nashrah Hani Jamadon, Kim Seah Tan. (2023). Influence Of Heat Treatment Parameters On Microstructure And Mechanical Performance Of Titanium Alloy In Lpbf: A Brief Review. - Journal Of Materials Research & Technology. 4091-4110. |
| Al Basir, Norhamidi Muhamad, Abu Bakar Sulong, Muhammad Bin Mohamed Amin, Nashrah Hani Jamadon, Nabilah Afiqah Mohd Radzuan. (2023). Micro-injection Molding And Debinding Behavior Of Hydroxyapatite/zirconia Bi-materials Fabricated By Two-component Micro Powder Injection Molding Process. - Materials. 1-18. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, David Hui. (2022). Adhesion Behaviour Of 3d Printed Polyamide Carbon Fibre Composite Filament. - Reviews On Advanced Materials Science. 838-848. |
| Bee Huah Lim, Edy Herianto Majlan, Ahmad Tajuddin, Teuku Husaini, Wan Ramli Wan Daud, Nabilah Afiqah Mohd Radzuan, Md. Ahsanul Haque. (2021). Comparison Of Catalyst-coated Membranes And Catalyst-coated Substratefor Pemfc Membrane Electrode Assembly: A Review. - Chinese Journal Of Chemical Engineering. 1-16. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Anil Verma, And Norhamidi Muhamad. (2021). Layup Sequence And Interfacial Bonding Of Additively Manufactured Polymeric Composite: A Brief Review. - Nanotechnology Reviews. 1-20. |
| Nur Farhani Ismail, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2021). The Effect Of Alkali Treatment On Physical, Mechanical And Thermal Properties Of Kenaf Fiber And Polymer Epoxy Composites. - Polymers. 1-17. |
| Farah Atiqah Abdul Azam, Nishata Royan Rajendran Royan, Nor Yuliana Yuhana, Nabilah Afiqah Mohd Radzuan, Sahrim Ahmad And Abu Bakar Sulong. (2020). Fabrication Of Porous Recycled Hdpe Biocomposites Foam: Effect Of Rice Husk Filler Contents And Surface Treatments On The Mechanical Properties. - Polymers. 1-14. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron. (2020). New Processing Technique For Biodegradable Kenaf Composites: A Simple Alternative To Commercial Automotive Parts. - Composites Part B: Engineering. 1-7. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2020). Effects Of High-temperature Exposure On The Mechanical Properties Of Kenaf Composites. - Polymers. 1-13. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu, Ahmad Tajuddin Abdullah, Teuku Husaini, Ros Emilia Rosli, Edy Herianto Majlan, Masli Irwan Rosli. (2019). Fibre Orientation Effect On Polypropylene/milled Carbon Fiber Composites In The Presence Of Carbon Nanotubes Or Graphene As A Secondary Filler: Application On Pem Fuel Cell Bipolar Plate. - International Journal Of Hydrogen Energy. 30618-30626. |
| Rosli, R.e., Sulong, A.b., Daud, W.r.w., Zulkifley, M.a., Rosli, M.i., Majlan, E.h., Haque, M.a. & Radzuan N.a.m.. (2019). The Design And Development Of An Ht-pemfc Test Cell And Test Station. - International Journal Of Hydrogen Energy. 30763-30771. |
| Nabilah Afiqah Mohd Radzuan, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria Bin Razak, Izdihar Binti Tharizi, Abu Bakar Sulong, Che Hassan Che Haron, Norhamidi Muhamad. (2019). Kenaf Composites For Automotive Components: Enhancement In Machinability And Moldability. - Polymers. 1-10. |
| Nabilah Afiqah Mohd Radzuan , Abu Bakar Sulong, David Hui And Anil Verma. (2019). Electrical Conductivity Performance Of Predicted Modified Fibre Contact Model For Multi-filler Polymer Composite. - Polymers. 1-12. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi. (2022). Prestasi Bahan Polimer Komposit Dicetak Menggunakan Pemodelan Pemendapan Bersatu: Suatu Ulasan Ringkas. - Sains Malaysiana. 1545-1556. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Iswandi. (2021). Effect Of Multi-sized Graphite Filler On The Mechanical Properties And Electrical Conductivity. - Sains Malaysiana. 2025-2034. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, Mohd Yusuf Zakaria And Mohd Ikram Ramli. (2020). Study On The Influence Mechanism Of Sintering Hydroxyapatite (ha). - Journal Of Ceramic Processing Research. 662-666. |
| I Gusti Ayu Arwati, Edy Herianto Majlan, Lo Kee Shyuan, Teuku Husaini, Sagir Alva, Muhajirin, Nabilah Afiqah Mohd Radzuan. (2020). The Influence Of Temperature And Electroforesis Deposition Green Inhibitor On Bipolar Plate Aa5052 In Sulfuric Acid Medium. - Sains Malaysiana. 3169-3177. |
| Nabilah Afiqah Mohd Radzuan, Farhana Mohd Foudzi, Abu Bakar Sulong, M. S. H. Al-furjan, Nishata Royan Rajendran Royan. (2024). Quick Insight Into The Dynamic Dimensions Of 4d Printing In Polymeric Composite Mechanics. - Reviews On Advanced Materials Science. 1-12. |
| Fathin Iliana Jamhari. Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Nashrah Hani Jamadon, Kim Seah Tan. (2023). Influence Of Heat Treatment Parameters On Microstructure And Mechanical Performance Of Titanium Alloy In Lpbf: A Brief Review. - Journal Of Materials Research & Technology. 4091-4110. |
| Al Basir, Norhamidi Muhamad, Abu Bakar Sulong, Muhammad Bin Mohamed Amin, Nashrah Hani Jamadon, Nabilah Afiqah Mohd Radzuan. (2023). Micro-injection Molding And Debinding Behavior Of Hydroxyapatite/zirconia Bi-materials Fabricated By Two-component Micro Powder Injection Molding Process. - Materials. 1-18. |
| Nabilah Afiqah Mohd Radzuan, Nisa Naima Khalid, Farhana Mohd Foudzi, Nishata Royan Rajendran Royan And Abu Bakar Sulong. (2023). Mechanical Analysis Of 3d Printed Polyamide Composites Under Different Filler Loadings. - Polymers. 1-11. |
| Minhalina Ahmad Buhairi, Farhana Mohd Foudzi, Fathin Iliana Jamhari, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Intan Fadhlina Mohamed, Abdul Hadi Azman, Wan Sharuzi Wan Harun, Msh Al-furjan. (2023). Review On Volumetric Energy Density: Influence On Morphology And Mechanical Properties Of Ti6al4v Manufactured Via Laser Powder Bed Fusion. - Progress In Additive Manufacturing. 265-283. |
| Fathin Iliana Jamhari, Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Norhamidi Muhamad, Intan Fadhlina Mohamed, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan. (2023). Impact Of Hot Isostatic Pressing On Surface Quality, Porosity And Performance Of Ti6al4v Manufactured By Laser Powder Bed Fusion: A Brief Review. - Jurnal Tribologi. 1-15. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi. (2022). Prestasi Bahan Polimer Komposit Dicetak Menggunakan Pemodelan Pemendapan Bersatu: Suatu Ulasan Ringkas. - Sains Malaysiana. 1545-1556. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, David Hui. (2022). Adhesion Behaviour Of 3d Printed Polyamide Carbon Fibre Composite Filament. - Reviews On Advanced Materials Science. 838-848. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Iswandi. (2021). Effect Of Multi-sized Graphite Filler On The Mechanical Properties And Electrical Conductivity. - Sains Malaysiana. 2025-2034. |
| Nur Farhani Ismail, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2021). The Effect Of Alkali Treatment On Physical, Mechanical And Thermal Properties Of Kenaf Fiber And Polymer Epoxy Composites. - Polymers. 1-17. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Anil Verma, And Norhamidi Muhamad. (2021). Layup Sequence And Interfacial Bonding Of Additively Manufactured Polymeric Composite: A Brief Review. - Nanotechnology Reviews. 1-20. |
| Bee Huah Lim, Edy Herianto Majlan, Ahmad Tajuddin, Teuku Husaini, Wan Ramli Wan Daud, Nabilah Afiqah Mohd Radzuan, Md. Ahsanul Haque. (2021). Comparison Of Catalyst-coated Membranes And Catalyst-coated Substratefor Pemfc Membrane Electrode Assembly: A Review. - Chinese Journal Of Chemical Engineering. 1-16. |
| Farah Atiqah Abdul Azam, Nishata Royan Rajendran Royan, Nor Yuliana Yuhana, Nabilah Afiqah Mohd Radzuan, Sahrim Ahmad And Abu Bakar Sulong. (2020). Fabrication Of Porous Recycled Hdpe Biocomposites Foam: Effect Of Rice Husk Filler Contents And Surface Treatments On The Mechanical Properties. - Polymers. 1-14. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi, Mohd Yusuf Zakaria And Mohd Ikram Ramli. (2020). Study On The Influence Mechanism Of Sintering Hydroxyapatite (ha). - Journal Of Ceramic Processing Research. 662-666. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron. (2020). New Processing Technique For Biodegradable Kenaf Composites: A Simple Alternative To Commercial Automotive Parts. - Composites Part B: Engineering. 1-7. |
| I Gusti Ayu Arwati, Edy Herianto Majlan, Lo Kee Shyuan, Teuku Husaini, Sagir Alva, Muhajirin, Nabilah Afiqah Mohd Radzuan. (2020). The Influence Of Temperature And Electroforesis Deposition Green Inhibitor On Bipolar Plate Aa5052 In Sulfuric Acid Medium. - Sains Malaysiana. 3169-3177. |
| Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad And Che Hassan Che Haron. (2020). Effects Of High-temperature Exposure On The Mechanical Properties Of Kenaf Composites. - Polymers. 1-13. |
| Rosli, R.e., Sulong, A.b., Daud, W.r.w., Zulkifley, M.a., Rosli, M.i., Majlan, E.h., Haque, M.a. & Radzuan N.a.m.. (2019). The Design And Development Of An Ht-pemfc Test Cell And Test Station. - International Journal Of Hydrogen Energy. 30763-30771. |
| Nabilah Afiqah Mohd Radzuan, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria Bin Razak, Izdihar Binti Tharizi, Abu Bakar Sulong, Che Hassan Che Haron, Norhamidi Muhamad. (2019). Kenaf Composites For Automotive Components: Enhancement In Machinability And Moldability. - Polymers. 1-10. |
| Nabilah Afiqah Mohd Radzuan , Abu Bakar Sulong, David Hui And Anil Verma. (2019). Electrical Conductivity Performance Of Predicted Modified Fibre Contact Model For Multi-filler Polymer Composite. - Polymers. 1-12. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu, Ahmad Tajuddin Abdullah, Teuku Husaini, Ros Emilia Rosli, Edy Herianto Majlan, Masli Irwan Rosli. (2019). Fibre Orientation Effect On Polypropylene/milled Carbon Fiber Composites In The Presence Of Carbon Nanotubes Or Graphene As A Secondary Filler: Application On Pem Fuel Cell Bipolar Plate. - International Journal Of Hydrogen Energy. 30618-30626. |
| Farhana Mohd Foudzi, Minhalina Ahmad Buhairi, Fathin Iliana Jamhari, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Norhamidi Muhamad, Wan Sharuzi Wan Harun, Mohannad Saleh Hammadi Al-furjan. (2021). Effect Of Energy Density On Properties Of Additive Manufactured Ti6al4v Via Slm. - International Conference On Powder Metallurgy And Particulate Materials (powdermet2021). 434-448. |
| Nabilah Afiqah Mohd Radzuan, Mihirssen Gunasegran And Nisa Naima Khalid. (2021). The Effect Of Graphene Addition On The Youngs Modulus And Tensile Strength Of Kenaf Fibre Composites. - Iop Conf. Series: Materials Science And Engineering. 1-8. |
| Nabilah Afiqah Mohd Radzuan, Mohammad Afiq Rashid, Dulina Tholibon, Abu Bakar Sulong And Che Hassan Che Haron. (2021). Kenaf Reinforced Polypropylene Composites: A Numerical Simulation. - Aip Conference Proceedings / 4th International Sciences, Technology & Engineering Conference (istec) 2020. 1-9. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong And Farhana Mohd Foudzi. (2021). A Review On Bonding Of Polyamide Reinforced Carbon Fibre Via Additive Manufacturing. - Iop Conf. Series: Materials Science And Engineering. 1-6. |
| Nabilah Afiqah Mohd. Radzuan, Abu Bakar Sulong, Mohd. Yusuf Zakaria. (2021). Komposit Polimer Pengalir Revolusi Teknologi Pembuatan. - . 218. |
| Nabilah Afiqah Mohd. Radzuan, Abu Bakar Sulong, Mohd. Yusuf Zakaria. (2021). Komposit Polimer Pengalir Revolusi Teknologi Pembuatan. - . 218. |
| Norhamidi Bin Muhamad;che Hassan Bin Che Haron;abu Bakar Bin Sulong;nashrah Hani Binti Jamadon;farhana Binti Mohd Foudzi;nabilah Afiqah Binti Mohd Radzuan. (2024). Investigation Of Sintering Mechanism Of Yttria-stabilized Zirconia And Hydroxyapatite Bi-material Micro-components Produced By Two-component Micro-powder Injection Moulding. - . . |
| Nabilah Afiqah Binti Mohd Radzuan;norhamidi Bin Muhamad;abu Bakar Bin Sulong;zaliha Binti Wahid;farhana Binti Mohd Foudzi. (2024). Mechanism Of Anticipating Diffusion And Delamination On Fibre Oriented Additive Manufactured Polyamide/carbon Fibre Composite Filament. - . . |
| Abu Bakar Bin Sulong;rosiah Binti Rohani;farhana Binti Mohd Foudzi;nabilah Afiqah Binti Mohd Radzuan. (2023). Radiation-induced Grafting Of Electrospun Nanofiber Based Functionalized Natural Rubber For Membrane Application. - . . |
| Nurul Syazwani Sahari, Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong. (2023). Rheology Properties In Polyamide Reinforced Carbon Fibre Composite. - International Conferences On Powder Metallurgy And Advanced Processes & Systems In Manufacturing (pm7 & Apsim2023). 1-3. |
| Abu Bakar Bin Sulong;norhamidi Bin Muhamad;mohd. Zaidi Bin Omar;zainuddin Bin Sajuri;nabilah Afiqah Binti Mohd Radzuan;mohd Ikram Bin Ramli. (2023). Mechanism In Processability Of Copper-aluminium-manganese Shape Memory Alloys (smas) Through Powder Injection Moulding (pim). - . . |
| Zaliha Wahid, Nabilah Afiqah Mohd Radzuan, Nurhasyimah Abd Aziz, Afifah Zakiyyah Juri , Abu Bakar Sulong. (2023). On Mechanical Performance Of 3d Printed Wood Mimic Materials. - 7th Powder Metallurgy And Advanced Processes & Systems In Manufacturing 2023 (pm7&apsim2023). 1-9. |
| Nabilah Afiqah Binti Mohd Radzuan;norhamidi Bin Muhamad;abu Bakar Bin Sulong;farhana Binti Mohd Foudzi. (2023). Bonding Of Polyamide Reinforced Carbon Fibre Via Additive Manufacturing. - . . |
| Nurul Syazwani Sahari, Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Nishata Royan A/p Rajendran Royan. (2023). Rheology Properties In Composite Filament Making. - 8th International Conference On Fuel Cell & Hydrogen Technology 3rd Symposium On Fuel Cell And Hydrogen Technology 2023 (icfcht Sfcht 2023). 05. |
| Norazyan Rudi Hartono, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong. (2023). Carbon Fibre Reinforced Polyamides In High-temperature Via 3d Printing. - Malaysia Polymer International Conference 2023. 20. |
| Nabilah Afiqah Mohd Radzuan, Fatin Zahidah Awang Adi, Abu Bakar Sulong, Nisa Naima Khalid. (2022). Shear Test Of 3d Printed Polymer Composites. - 31st Regional Conference On Solid State Science And Technology (rcssst2022). 1. |
| Nabilah Afiqah Mohd Radzuan. (2022). How To Write A Good Executive Summary. - . 1-10. |
| Nabilah Afiqah Mohd Radzuan. (2022). How To Write A Good Literature Review. - . 1-10. |
| Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Norhamidi Muhamad. (2022). Layup Sequence And Interfacial Bonding Of Additively Manufactured Polymeric Composite. - 6th Postgraduate Colloquium For Environmental Research 2022 (pocer 2022). 16-17. |
| Nabilah Afiqah Mohd Radzuan, Nurul Syazwani Sahari, Nisa Naima Khalid, Abu Bakar Sulong. (2022). Rheology Properties In Composite Filament Making. - International Seminar On Engineering Science And Technology International Conference (estic) 2022. 1. |
| Mohd Shahbudin Mastar @ Masdar Et Al. (rujuk Salinan Kertas Untuk Senarai Lengkap Penulis). (2022). Fuel Cell System - General Operational And Safety Requirements. - . 1-32. |
| Gusti Ayu Arwati, Edy Herianto Majlan, Loh Kee Shyuan, Khuzaimah Ariffin , Teuku Husaini, Sagir Alva, Wahyu Muhammad, Nabilah Afiqah Mohd Radzuan. (2022). Effect Of Chitosan On The Corrosion Inhibition For Aluminium Alloy. - 23rd World Hydrogen Energy Conference. 128-129. |
| I Gusti Ayu Arwati, Edy Herianto Majlan, Loh Kee Shyuan, Khuzaimah Ariffin , Teuku Husaini,sagir Alva, Wahyu Muhammad, Nabilah Afiqah Mohd Radzuan. (2022). Effect Of Chitosan On The Corrosion Inhibition For Aluminum Alloy In H2so4 Medium. - 23rd World Hydrogen Energy Conference. 149-150. |
| Nurul Akidah Baharuddin Et Al. (rujuk Salinan Kertas Untuk Senarai Lengkap Penulis). (2022). Fuel Cell System - Stationary Backup Power Solution For Telecommunication Sites. - . 1-35. |
| Nabilah Afiqah Mohd Radzuan, Mohd Zamzuri Ahmad Shukri, Nisa Naima Khalid. (2021). Reinforced Kenaf Composite As A Feeder For 3d Printing Application. - International Conference On Manufacturing Engineering Technology (iconmet). 96. |
| Abu Bakar Bin Sulong;che Hassan Bin Che Haron;norhamidi Bin Muhamad;nabilah Afiqah Binti Mohd Radzuan. (2021). Kesan Penambahan Bahan Nano Terhadap Ketahanan Mekanikal Dan Fizikal Kenaf Polimer Komposit Bagi Aplikasi Automotif. - . . |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong And Mohammad Ashraf Mohammad Amin. (2021). 3d Printed Polyamide-carbon Fibre Composites Filament. - 8th International Conference On Solid State Science And Technology (8th Icssst 2021). 117. |
| Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Farhana Mohd Foudzi. (2021). Conductive Polymer Composites Using 3d Printing For Electronic Devices: A Review. - International Conference On Manufacturing Engineering Technology (iconmet). 94. |
| Interfacial bonding and deformation mechanism between core and face panel of 3D printed lattice carbon fibre containing polylactic acid , Ketua Projek , 01-08-2024 sehingga 31-07-2027 , Kebangsaan |
| High selectivity of 3D printed internal microchannel hydrogel through laser-induced graphene for microfluidic devices and sustainable sensor , Penyelidik Bersama , 01-11-2024 sehingga 31-10-2026 , Universiti |
| Development of selective laser melting (SLM) parameters for enhanced shape memory behavior of 4D printed nickel titanium (NiTi) alloys , Penyelidik Bersama , 01-11-2024 sehingga 31-10-2026 , Antarabangsa |
| Prototype Development and Field Testing of Stainless Steel-Zirconia (bi-material) Guide Pin for Spot Welding fabricated via Two-Component Powder Injection Moulding , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
| Elucidating incompatibilities of Ceramic Injection Molding (CIM) feedstock in Ceramic Fused Filament Fabrication (CF3): Discovering Processing Environment Discrepancies , Penyelidik Bersama , 01-08-2024 sehingga 31-07-2026 , Kebangsaan |
| Elucidation of bonding mechanism of bi-modal (nano and micro-sized particles) stainless steel 316L and yttria-stabilized zirconia through two component bi-material micro-powder injection moulding (2C-2M-µPIM) , Penyelidik Bersama , 23-01-2024 sehingga 22-01-2025 , Universiti |
| Printability, interface bonding strength and heat treatment analysis on metals with thermal profiles` differences via multi-material additive manufacturing (MMAM) using Laser Powder Bed Fusion (LPBF) method , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2026 , Kebangsaan |
| Fracture prediction of additively manufactured composites through coupled finite element and machine learning approaches , Penyelidik Bersama , 01-10-2023 sehingga 30-09-2026 , Kebangsaan |
| Recovery of Phase Transformation Mechanism Changes in Copper-Aluminum-Manganese Shape Memory Alloys (SMAs) Processed by Powder Injection Molding (PIM) , Penyelidik Bersama , 07-09-2021 sehingga 06-03-2025 , Kebangsaan |
| Mechanism to induce thermal stimuli response of 4D printed polylactic acid reinforced graphene nanoplatelets , Ketua Projek , 01-10-2022 sehingga 30-09-2024 , Universiti |
| Mechanism of anticipating diffusion and delamination on fibre oriented additive manufactured polyamide/carbon fibre composite filament , Ketua Projek , 01-11-2020 sehingga 31-10-2023 , Kebangsaan |
| Bonding of Polyamide Reinforced Carbon Fibre via Additive Manufacturing , Ketua Projek , 01-08-2020 sehingga 31-01-2023 , Universiti |
| Investigation of sintering mechanism of yttria-stabilized zirconia and hydroxyapatite bi-material micro-components produced by two-component micro-powder injection moulding , Penyelidik Bersama , 19-01-2023 sehingga 18-01-2024 , Universiti |
| Printability and Performance of Two Different Metals 3D Printed in A Single Part , Penyelidik Bersama , 01-09-2021 sehingga 29-02-2024 , Universiti |
| Mechanism in Processability of Copper-Aluminium-Manganese Shape Memory Alloys (SMAs) Through Powder Injection Moulding (PIM) , Penyelidik Bersama , 01-08-2020 sehingga 31-01-2023 , Universiti |
| Radiation-Induced Grafting Of Electrospun Nanofiber Based Functionalized Natural Rubber for Membrane Application , Penyelidik Bersama , 01-10-2019 sehingga 30-09-2022 , Universiti |
| KESAN PENAMBAHAN BAHAN NANO TERHADAP KETAHANAN MEKANIKAL DAN FIZIKAL KENAF POLIMER KOMPOSIT BAGI APLIKASI AUTOMOTIF , Penyelidik Bersama , 03-06-2019 sehingga 02-12-2020 , Universiti |
| Development of Fixator Screw and Plate (Orthopedic Implant) using Novel Material of Composite Through Powder Injection Molding , Penyelidik Bersama , 01-02-2018 sehingga 31-01-2021 , Universiti |
| BEST PAPER AWARD , 2024 |
| Anugerah IUCEL X KNOVASI 2024 , 2024 |
| PECIPTA 2022 - International Conference and Exposition on Inventions by Institutions of Higher Learning , 2023 |
| KAJIAN KEBOLEHUPAYAAN ALOI TITANIUM BAGI PROSES PELEBURAN LASER SELEKTIF, MINHALINA BINTI AHMAD BUHAIRI, Sarjana |
| PENCIRIAN FILAMEN KOMPOSIT POLIAMIDA DIPERKUAT GENTIAN KARBON MENGGUNAKAN PERMODELAN PEMENDAPAN BERSATU, NISA NAIMA BINTI KHALID, Sarjana |
| HUANG ZHIQIANG, Sarjana |
| PROSES PENGACUAN SUNTIKAN DWISERBUK BAGI ZIRKONIA DAN HIDROKSIAPATIT, MUHAMMAD BIN MOHAMED AMIN, Doktor Falsafah |
| IESTI HAJAR BINTI HANAPI, Doktor Falsafah |
| ZALINA BINTI YA, Doktor Falsafah |
| LI XIAOJU, Doktor Falsafah |
| MAHATHIR MOHAMED, Doktor Falsafah |
| IZZAT BIN MAT SAMUDIN, Doktor Falsafah |
| MOHD FADLI BIN HASSAN, Doktor Falsafah |
| Incorporation of Sulfonated Silica Nano Particles into Polymer Blend Membrane for PEM Fuel Cell Applications , 17-09-2019 sehingga 01-01-1970 , Antarabangsa |
| Single Stack Performance using Chromium Carbide (CrC) and Niobium Carbide (NbC) Coated on 316 L Bipolar Plates , 30-08-2019 sehingga 01-01-1970 , Antarabangsa |
| Electrical conductivity of anisotropic PMMA based composite filaments with aligned carbon fibers predicting the influence of measurement direction , 31-10-2019 sehingga 01-01-1970 , Antarabangsa |
| Modeling and Simulation of Cyclic Voltammetry for Conducting Polymers using the Multi field Theory , 01-11-2019 sehingga 01-01-1970 , Antarabangsa |
| Influence of rounded cutting edge radius and machining parameters on surface roughness and tool wear in milling AISI H13 steel under dry and cryogenic machining , 12-11-2019 sehingga 01-01-1970 , Antarabangsa |
| Determining The Complex Permittivity Of Soda Lime Silica Glass-High Density Polyethylene (SLS-HDPE) Composites Material By Open Ended Coaxial Probe Technique For Microwave Applications , 13-11-2019 sehingga 01-01-1970 , Antarabangsa |
| Evolution of Microstructure and Mechanical Properties of AA6061 by High-Pressure Torsion , 23-01-2020 sehingga 01-01-1970 , Antarabangsa |
| Fibre Insert Mould for Injection Moulding , 22-01-2020 sehingga 01-01-1970 , Antarabangsa |
| Role of Structural Changes on Mechanical Properties of Polyamide Reinforced Composites , 08-02-2020 sehingga 01-01-1970 , Antarabangsa |
| Program dan Ujian Penyelidikan Bersama Universiti Kebangsaan Malaysia (UKM) , 26-02-2020 sehingga 26-03-2830 , Kebangsaan |
| Lembaga Jurutera Malaysia , 30-11-2017 sehingga 02-01-2030 , Kebangsaan |
| Kajian Ilimiah terhadap Proses Pembuatan Kenaf dengan Polipropilina , 22-11-2020 sehingga 25-01-2020 , Antarabangsa |
| MTSFB2010R0_Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| "Effect of Oxidation Stability on the Fuel and Storage Properties of Balanites aegyptiaca Biodiesel , 29-11-2020 sehingga 29-11-2019 , Antarabangsa |
| Deployment of Stationary Fuel Cell as a Backup Power Solution for The Telecommunication Sites. , 18-06-2020 sehingga 31-12-2022 , Kebangsaan |
| Investigation of Mechanical Properties in Nanoclay Filled Composites with Different Matrices and Reinforcements: A Short Review , 09-02-2021 sehingga 10-02-2021 , Antarabangsa |
| Reflection on adoption of qualitative methodology in research , 12-03-2021 sehingga 13-03-2021 , Antarabangsa |
| Investigating the Collaborative Effects of Geometric Surface Modifications through Different Sized Semi-circular Dimples Positioned at 40% of the Chord from the Leading Edge and Plain Flaps on NACA 0012 Aerofoil , 17-09-2021 sehingga 17-09-2021 , Antarabangsa |
| Investigation Interfacial Shear Strength and Mechanical Properties of Alkali Treated Kenaf Fiber/Microcrystalline Cellulose-Composite , 03-11-2021 sehingga 03-11-2021 , Antarabangsa |
| Simulating The Optimization Of Carbon Fiber Reinforced Polymer As A Wrapping Structure On Piping System Using SolidWorks , 04-10-2021 sehingga 04-10-2021 , Antarabangsa |
| Weld strength and cracking susceptibility analysis of Pulsed TIG welded Al-Mg-Si alloy by experimental approach , 18-08-2021 sehingga 18-08-2021 , Antarabangsa |
| Development of pulp moulded packaging samples from empty fruit bunch fibre , 18-05-2021 sehingga 18-05-2021 , Antarabangsa |
| Thermo-Electrical Behaviour of Al2O3 and SiO2 Nanofluids in A Proton-Exchange Membrane Fuel Cell(PEMFC) Cooling Channel , 21-06-2021 sehingga 21-06-2021 , Antarabangsa |
| Effect of friction stir processing on AZ91 Mg-alloy , 11-05-2021 sehingga 11-05-2021 , Antarabangsa |
| Effect of friction stir processing on AZ91 Mg-alloy , 11-05-2021 sehingga 11-05-2021 , Antarabangsa |
| Reflection on adoption of qualitative methodology in research , 09-03-2021 sehingga 09-03-2021 , Antarabangsa |
| Analysis of the influence of component type and operating condition on the selection of preventive maintenance strategy in multistage industrial machines. A Case Study , 17-11-2021 sehingga 17-11-2021 , Antarabangsa |
| Prediction of behaviour of thin-walled additively manufactured structure: Experimental-numerical approach , 15-12-2021 sehingga 15-12-2021 , Antarabangsa |
| An FEA Assisted Decision-Making Framework for PEMFC Gasket Material Selection , 11-03-2022 sehingga 11-03-2022 , Antarabangsa |
| Effect of Humidity and Fabrication Process Parameters on Optimization for Kenaf/Polylactic Acids Biocomposite," , 04-03-2022 sehingga 04-03-2022 , Antarabangsa |
| Activated Flux Tungsten Inert Gas (ATIG) welding process for weld depth enhancement A Review , 12-01-2022 sehingga 12-01-2022 , Antarabangsa |
| An FEA Assisted Decision-Making Framework for PEMFC Gasket Material Selection , 23-03-2022 sehingga 23-03-2022 , Antarabangsa |
| 31st Regional Conference on Solid State Science and Technology (RCSSST2022) , 06-09-2022 sehingga 08-09-2022 , Antarabangsa |
| Chairperson , 06-09-2022 sehingga 08-09-2022 , Antarabangsa |
| Invitation as Guest Speaker " How to Write a Good Executive Summary" , 31-10-2022 sehingga 31-10-2022 , Kebangsaan |
| Engineering Undergraduate Research Seminar (EUReS 2022) , 08-12-2022 sehingga 08-12-2022 , Kebangsaan |
| Review of chatter monitoring and control in machining EN series material , 05-12-2022 sehingga 05-12-2022 , Antarabangsa |
| Design optimization of Components for Additive Manufacturing-Repair: an Exploration of Artificial Neural Network Requirements and Application , 19-12-2022 sehingga 19-12-2022 , Antarabangsa |
| PREPARATION AND CHARACTERIZATION OF PINEAPPLE LEAF FIBRE REINFORCED POLY(VINYL ALCOHOL) COMPOSITES , 09-09-2022 sehingga 01-01-1970 , Kebangsaan |
| PREPARATION AND CHARACTERIZATION OF PINEAPPLE LEAF FIBRE REINFORCED POLY(VINYL ALCOHOL) COMPOSITES , 09-09-2022 sehingga 01-01-1970 , Kebangsaan |
| Deformation-Behavior Investigation of Auxetic Structure Made of PBAT , 10-01-2023 sehingga 10-01-2023 , Antarabangsa |
| Development of Al-Mg Alloy for the Protection of Steel Structure in 3.5% Nacl , 18-01-2023 sehingga 18-01-2023 , Antarabangsa |
| Material-preserving extrusion of polyamide on a twin-screw extruder , 30-01-2023 sehingga 30-01-2023 , Antarabangsa |
| An Overview the Compression and Flexural Behaviours of Sandwich Composite Structure With 3D-Printed Core. , 20-03-2023 sehingga 20-03-2023 , Antarabangsa |
| Engineered Interleaved Glass Fiber Composites using Additive Manufacturing: Effect of Mat properties, Resin Chemistry and Resin Rich Layer Thickness , 26-04-2023 sehingga 26-04-2023 , Antarabangsa |
| Advances in Polymer Technology , 26-04-2023 sehingga 26-04-2023 , Antarabangsa |
| A Review On Challenges In Using Blockchain Consensus For Swarm Robotic , 26-04-2023 sehingga 26-04-2023 , Antarabangsa |
| Engineered interleaved random glass fiber composites using additive manufacturing: Effect of mat properties, resin chemistry and resin rich layer thickness , 07-07-2023 sehingga 07-07-2023 , Antarabangsa |
| Effect of Strain Rate and Temperature on the Tensile Properties 2 of Long Glass Fiber Reinforced Polypropylene Composites , 10-07-2023 sehingga 10-07-2023 , Antarabangsa |
| Mechanical, morphological, and fire behaviors of sugar palm/glass fiber reinforced epoxy hybrid composites , 18-07-2023 sehingga 25-07-2023 , Antarabangsa |
| Design of Intelligent Hybrid Energy Ambulatory Surgical Center Ship in Efficient Way , 18-07-2023 sehingga 25-07-2023 , Antarabangsa |
| PECIPTA 2022 - International Conference and Exposition on Inventions by Institutions of Higher Learning , 26-07-2023 sehingga 01-01-1970 , Kebangsaan |
| PECIPTA 2022 - International Conference and Exposition on Inventions by Institutions of Higher Learning , 26-07-2023 sehingga 01-01-1970 , Kebangsaan |
| Couroupita Guianensis Fruit as Electrode Material for Electric Double Layer Capacitor (EDLC) , 30-08-2023 sehingga 01-09-2023 , Antarabangsa |
| judge for Engineering Research Symposium (3rd EUReS) at UOW Malaysia , 29-11-2023 sehingga 29-11-2023 , Kebangsaan |
| Penyelidikan FYP , 01-11-2023 sehingga 12-12-2023 , Kebangsaan |
| Effect of recycling on thermomechanical properties of Zein and Soy Protein Isolate bioplastics , 16-01-2024 sehingga 16-01-2024 , Antarabangsa |
| The Effect of the High-Pressure Torsion Process and The Post-Treatment Process on Aluminium Alloy 5052The Effect of the High-Pressure Torsion Process and The Post-Treatment Process on Aluminium Alloy 5052 , 16-01-2024 sehingga 16-01-2024 , Antarabangsa |
| On Cyclic Fatigue Crack Growth in Carbon Fibre Reinforced Epoxy Polymer Composites , 16-01-2024 sehingga 16-01-2024 , Antarabangsa |
| Evaluation of the Viability of 3D Printing in Recycling Polymers , 16-01-2024 sehingga 16-01-2024 , Antarabangsa |
| WREN Symposium 2024 , 21-03-2024 sehingga 22-03-2024 , Antarabangsa |
| Lignocellulosic biomass for biofuel, Biomass pretreatment and its application in different materials. A Review , 19-04-2024 sehingga 19-04-2024 , Antarabangsa |
| Keberkesanan Peranti Sekunder Pelindung Aerosol Dalam Pembendungan Penyebaran Aerosol: Satu Perbandingan , 19-04-2024 sehingga 19-04-2024 , Antarabangsa |
| Keberkesanan Peranti Sekunder Pelindung Aerosol Dalam Pembendungan Penyebaran Aerosol: Satu Perbandingan , 19-04-2024 sehingga 19-04-2024 , Antarabangsa |
| PLA/Wollastonite Composite Filaments for Sustainable 3D Printing Application: Rheological Properties and Extrusion , 19-04-2024 sehingga 19-04-2024 , Antarabangsa |
| Physical, Chemical, and Mechanical Characterization of Coated Date Palm Leaf Fiber from the Middle Region of Iraq for Their Potential Use in Civil Engineering Application , 19-04-2024 sehingga 19-04-2024 , Antarabangsa |
| Prediction of short- to long-term cyclic deformation behavior and fatigue life of polymers , 14-05-2024 sehingga 14-05-2024 , Antarabangsa |
| The Effect of Sample Configuration on the Measurement of the Bending Properties of Extruded Polystyrene Using Three Point, Four Point, and Compression Bending Tests , 10-06-2024 sehingga 10-06-2024 , Antarabangsa |
| Master of Science , 24-06-2024 sehingga 31-12-2027 , Kebangsaan |
| Master of Science , 24-06-2024 sehingga 31-12-2027 , Kebangsaan |
| Design, modelling, and optimization of 3-day heat-cured ultrahigh-performance fibre-reinforced concrete produced using local materials in Nigeria , 15-08-2024 sehingga 16-08-2024 , Antarabangsa |
| Modelling And Simulation of Stainless-Steel Powder Pressing with Consideration of Residual Stresses , 22-08-2024 sehingga 26-08-2024 , Antarabangsa |
| Analisis Penerapan Pengetahuan Industri 4.0 dalam Proses Latihan Penyambungan dan Pengetatan Bolt menggunakan Teknologi Realiti Terimbuh di Perodua Manufacturing Sdn. Bhd. , 18-09-2024 sehingga 18-09-2024 , Antarabangsa |
| Analisis Penerapan Pengetahuan Industri 4.0 dalam Proses Latihan Penyambungan dan Pengetatan Bolt menggunakan Teknologi Realiti Terimbuh di Perodua Manufacturing Sdn. Bhd. , 18-09-2024 sehingga 18-09-2024 , Antarabangsa |
| Anugerah IUCEL X KNOVASI 2024 , 05-09-2024 sehingga 01-01-1970 , Kebangsaan |
| Adsorption Properties of Biomass Power Plant Ash for Cd in Water , 07-10-2024 sehingga 07-10-2024 , Antarabangsa |
| Ultrasound assisted extraction of cellulose and nanocellulose from coconut shell , 10-10-2024 sehingga 10-10-2024 , Antarabangsa |
| BEST PAPER AWARD , 21-10-2024 sehingga 01-01-1970 , Antarabangsa |
| Mechanical metamaterials and 3D printing: Recent advancements and current challenges , 06-11-2024 sehingga 06-11-2024 , Antarabangsa |
| Felo Bersekutu Pusat Kecemerlangan Penyelidikan (CoE) FKAB , 05-06-2024 sehingga 04-06-2027 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Editor Jurnal Kejuruteraan FKAB , 01-01-2023 sehingga 31-12-2025 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Gotong Royong JKMP 4/2024 Sempena Lawatan Audit MQA , 20-06-2024 sehingga 20-06-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Gotong Royong Perdana Jabatan Kejuruteraan Mekanikal dan Pembuatan 2022 , 20-07-2022 sehingga 20-07-2022 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Gotong-Royong MAW 2024 JKMP, FKAB , 30-09-2024 sehingga 30-09-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa ICFCHT-SFCHT2023 , 30-08-2022 sehingga 06-09-2023 , Universiti |
| Jawatankuasa Kerja ChatGPT-UKM , 13-02-2023 sehingga 12-02-2025 , Universiti |
| Jawatankuasa Latihan Industri ke Syarikat Sesi 2021/2022 , 31-07-2022 sehingga 20-10-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Lawatan Latihan Industri Sesi 2023 , 14-08-2023 sehingga 11-10-2023 , Universiti |
| Jawatankuasa Minggu Inovasi dan Kreativiti FKAB , 03-01-2022 sehingga 06-01-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Minggu Inovasi dan Kreativiti FKAB (MIKF) , 05-01-2023 sehingga 30-01-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Panel Editor Jurnal Kejuruteraan , 01-07-2020 sehingga 30-06-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Kejuruteraan Mekanikal JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Pembuatan Pintar JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Penyediaan Laporan Penilaian Kendiri Program Sarjana Pengurusan Teknologi Industri JKMP , 27-10-2023 sehingga 31-12-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Penyelidikan dan Inovasi JKMP FKAB , 01-05-2020 sehingga 30-04-2023 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa Peperiksaan Lisan Bil. 22/2021 (P.JKMP) , 28-07-2021 sehingga 28-07-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Peperiksaan Lisan Bil. 35/2019 (P.Mercu) , 07-11-2019 sehingga 07-11-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa Petugas Majlis Minggu Mesra Mahasiswa (3M) FKAB , 03-09-2019 sehingga 04-09-2019 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa SAR dan Akreditasi 2022 , 01-03-2021 sehingga 28-02-2023 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Jawatankuasa TERAS UKM (Kebitaraan i-Minda) , 01-04-2023 sehingga 30-04-2025 , Fakulti / Institut / Pusat Perkhidmatan |
| Jawatankuasa UKM di 7th International Technical Conference 2023 (ITC2023) , 01-02-2023 sehingga 31-01-2024 , Universiti |
| Jawatankuasa Unit Penambahbaikan Pengajaran dan Pembelajaran (UP3) JKMP , 01-03-2021 sehingga 28-02-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Kumpulan Fokus T.E.R.A.S UKM (Kebitaraan i-MINDA) , 06-10-2021 sehingga 05-12-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PENYEDIAAN LAPORAN INTERIM PROGRAM SARJANA MUDA KEJURUTERAAN MEKANIKAL JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN , 10-07-2024 sehingga 09-08-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| PELANTIKAN SEBAGAI AHLI JAWATANKUASA PROGRAM MINGGU PENYELIDIKAN Research, Innovation & Commercialization Highlights RICH@FKAB 2024 , 02-05-2024 sehingga 31-12-2024 , Fakulti / Institut / Pusat Perkhidmatan |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 INSTITUT SEL FUEL BAGI SEMESTER 2SESI AKADEMIK 2020/2021 , 04-08-2021 sehingga 05-08-2021 , Fakulti / Institut / Pusat Perkhidmatan |
| PENILAI SEMINAR SISWAZAH DAN PEMBENTANGAN RARA6014 SEMESTER 1 SESI AKADEMIK 2021/2022 , 15-02-2022 sehingga 16-02-2022 , Fakulti / Institut / Pusat Perkhidmatan |
| PERSIDANGAN DAN EKSPO CIPTAAN INSTITUSI PENGAJIAN TINGGI ANTARABANGSA TAHUN 2022 (PECIPTA’22) , 02-11-2022 sehingga 03-11-2022 , Universiti |
| Panel Penilai Proposal RARA6014/RARA8014 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Pelantikan Sebagai Juri Pertandingan MIKEF 2024 - Aerodash: Cabaran Kereta F1 , 04-06-2024 sehingga 04-06-2024 , Pusat Pengajian / Jabatan / Pusat Penyelidikan / Unit |
| Penilai Kolokium Siswazah 2023 , 03-07-2023 sehingga 09-08-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Pertandingan Minggu Inovasi dan Kreativiti (MIKF) , 07-06-2023 sehingga 07-06-2023 , Fakulti / Institut / Pusat Perkhidmatan |
| Program Materials Lecture Competition 2023 (MLC 2023) , 01-03-2023 sehingga 31-07-2023 , Universiti |