Penerbitan WOS

Fadzilah Adnan, Zainuddin Sajuri, Mohd Zaidi Omar.  (2019).  Effect of uniaxial load on microstructure and mechanical properties of Thixo-joint AISI D2 tool steel.  - Journal of Mechanical Engineering and Sciences.  5006-5020. 

Y. S. Kong, S. Abdullah, D. Schramm, M. Z. Omar, S. M. Haris.  (2019).  Design of artificial neural network using particle swarm optimisation for automotive spring durability.  - Journal of Mechanical Science and Technology.  1-9. 

Mohamed A. Gebril, M. Zaidi. Omar, NK. Othman & I.F. Mohamed.  (2019).  Effect of equal channel angular pressing processing routes on corrosion resistance and hardness of heat treated A356 alloy.  - Sains Malaysiana.  661-668. 

Y.S.Kong, S.Abdullah, D.Schramm, M.Z.Omar, S.M.Haris.  (2019).  Correlation of uniaxial and multiaxial fatigue models for automobile spring life assessment.  - Experimental Techniques.  1-19. 

Najihah Abdul Rahman, Shahrum Abdullah, Mohamad Faizal Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri, Wan Fathul Hakim Zamri.  (2018).  Ballistic limit of laminated panels with different joining materials subjected to steel-hardened core projectile.  - International Journal of Integrated Engineering. 

Roslinda Idris, Shahrum Abdullah, Prakash Thamburaja, Mohd Zaidi Omar.  (2018).  The need to generate entropy characteristics for fatigue life prediction in low-carbon steel.  - Journal of the Brazilian Society of Mechanical Sciences and Engineering. 

Mohd Anif Mohd Arif, Mohd Zaidi Omar & Zainuddin Sajuri.  (2018).  Pembentukan mikrostruktur berbentuk sfera dalam keadaan separa pepejal aloi aluminium Al-4.8Si-2.8Cu-0.5Mg.  - Jurnal Kejuruteraan. 

Nora Osman, Zainuddin Sajuri and Mohd Zaidi Omar.  (2018).  Multi-pass friction stirred clad welding of dissimilar joined AA6061 aluminium alloy and brass.  - Journal of Mechanical Engineering and Sciences.  4285-4299. 

Junaidi Syarif, Nofriady Handra, Zainuddin Sajuri, Mohd Zaidi Omar.  (2018).  Change in tensile properties of dual-phase steels by cu addition.  - Transactions of the Indian Institute of Metals.  513-519. 

R. Idris, S. Abdullah, P. Thamburaja, M. Z. Omar.  (2018).  Entropy-based approach for fatigue crack growth rate of dual-phase steel.  - International Journal of Integrated Engineering. 

R Idris, S Abdullah, P Thamburaja and MZ Omar.  (2017).  Evaluation of fatigue crack growth rate for iron-carbon metals based on degradation-entropy generation theorem.  - Journal of Fundamental and Applied Sciences.  526-541. 

Khaled Salem Alhawari, Mohd Zaidi Omar, Mariyam Jameelah Ghazali, Mohd Shukor Salleh, Mohammed Naser Abdulrazaq.  (2017).  Effect of thixoforming on the wear properties of Al-Si-Cu aluminium alloy.  - Jurnal Teknologi. 

K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh and M. N. Mohammed.  (2016).  Dry sliding wear behaviour of thixoformed hypoeutectic Al-Si-Cu alloy with different amounts of magnesium.  - Composite Interfaces.  519-531. 

A.M. Aziz, M.Z. Omar and M.S. Salleh.  (2016).  Evolusi Mikrostruktur Aloi A333 melalui Proses Logam Separa Pepejal.  - Sains Malaysiana.  977-987. 

Abdullah M.F., Abdullah S., Omar M.Z., Sajuri Z., Sohaimi R.M..  (2016).  Fatigue life of the magnesium alloy AZ31B under specific spectrum loading.  - Materialpruefung/Materials Testing.  200-205. 

Aripin M.A., Sajuri Z., Abdullah S., Omar M.Z., Zamri W.F.H., Jamil W.N.M., Abdullah M.F..  (2016).  Microscale groove effect on shear strength of epoxy-bonded dissimilar metal plate.  - Journal of Adhesion Science and Technology.  2001-2012. 

W.N.M. Jamil, M.A. Aripin, Z. Sajuri, S. Abdullah, M.Z. Omar, M.F. Abdullah and W.F.H. Zamri.  (2016).  Mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles.  - International Journal of Automotive and Mechanical Engineering.  3742-3753. 

Ahmad Muhammad Aziz, Mohd Zaidi Omar, Zainuddin Sajuri and Mohd Shukor Salleh.  (2016).  Microstructural morphology of rheocast A319 aluminium alloy.  - Advances in Mechanical Engineering.  1-10. 

M. N. Mohammed, M. Z. Omar, Z. Sajuri, M. S. Salleh and K. S. Alhawari.  (2015).  Trend and Development of Semisolid Metal Joining Processing.  - Advances in Materials Science and Engineering.  1-13. 

M.J. Ghazali, M. Daud, A. Muhammad, M.Z. Omar, C.H. Azhari.  (2015).  Microstructure analyses of malay keris and its relation to mechanical properties.  - Acta Physica Polonica A.  1358-1362. 

Mohamad Faizal Abdullah, Shahrum Abdullah, Mohd Zaidi Omar, Zainuddin Sajuri and Risby Mohd Sohaimi.  (2015).  Failure observation of the AZ31Bmagnesium alloy and the effect of leadaddition content under ballistic impact.  - Advances in Mechanical Engineering.  1-13. 

M.N. Mohammed, M.Z. Omar, J. Syarif & M.S. Salleh.  (2014).  Morphological Evolution during Partial Re-Melting of AISI D2 Cold-Work Tool Steel.  - Sains Malaysiana.  1213-1219. 

M.S. Salleh, M.Z. Omar, J. Syarif & M.N. Mohammed.  (2014).  Permodelan Termodinamik Aloi Al-Si-Cu untuk Pemprosesan Logam Separa Pepejal.  - Sains Malaysiana.  43(5): 791-798. 

Junaidi Syarif, Agung Iswadi, Mariyam Jameelah Ghazali, Zainuddin Sajuri, Mohd Zaidi Omar.  (2013).  Wear behavior of copper-containing ferritic iron under a dry sliding condition.  - Journal of Zhejiang University - Science A.  14(14):906-914. 

Y. S. Kong, M. Z. Omar, L. B. Chua and S. Abdullah.  (2013).  Explicit Nonlinear Finite Element Geometric Analysis of Parabolic Leaf Springs under Various Loads.  - Scientific World Journal.  2013:Article ID 261926. 

M. N. Mohammed, M. Z. Omar, J. Syarif, Z. Sajuri, M. S. Salleh, and K. S. Alhawari.  (2013).  Microstructural Evolution during DPRM Process of Semisolid Ledeburitic D2 Tool Steel.  - Scientific World Journal.  2013:Article ID 828926. 

M. N. Mohammed, M. Z. Omar, M. S. Salleh, K. S. Alhawari, P. Kapranos.  (2013).  Semisolid Metal Processing Techniques for Nondendritic Feedstock Production.  - Scientific World Journal.  2013:Article ID 752175. 

Junaidi Syarif, Eko Kurniawan, Zainuddin Sajuri & Mohd Zaidi Omar.  (2013).  Influence of Iron on Phase Stability and Corrosion Resistance of Ti-15%Cr Alloy.  - Sains Malaysiana.  42(12):1775-178. 

M. N. Mohammed, M. Z. Omar, M. S. Salleh, and K. S. Alhawari.  (2013).  Study on Thixojoining Process Using Partial Remelting Method.  - Advances in Materials Science and Engineering.  2013:Article ID 251472.