norhamidi bin muhamad;mohd. zaidi bin omar;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi.  (2022).  effect of metal-ceramic (bi-material) on inter-surface bonding by micro co-powder injection molding.  - .  . 

norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  - .  . 

nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad.  (2022).  layup sequence and interfacial bonding of additively manufactured polymeric composite.  - 6th postgraduate colloquium for environmental research 2022 (pocer 2022).  16-17. 

abu bakar bin sulong;che hassan bin che haron;norhamidi bin muhamad;nabilah afiqah binti mohd radzuan.  (2021).  kesan penambahan bahan nano terhadap ketahanan mekanikal dan fizikal kenaf polimer komposit bagi aplikasi automotif.  - .  . 

mariyam jameelah binti ghazali;norhamidi bin muhamad;intan fadhlina binti mohamed.  (2021).  facile in-situ casting technique of fe-tic for industries.  - .  . 

mohd syuhaimi ab rahman, najib adun, norhamidi muhamad, farah farzana rasol, iszan hana kaharudin,.  (2021).  ukm bantu mangsa banjir di pahang.  - fikrah pahang.  1. 

abu bakar bin sulong;norhamidi bin muhamad;andanastuti muchtar;roslinda binti shamsudin;ng min hwei.  (2020).  tajuk program: metal-ceramic composite: a new generation material for bone implant tajuk projek: effect of processing parameters on novel metal-ceramic composite through powder injection molding.  - .  . 

norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  - .  . 

norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid.  (2019).  advanced copper/graphene composite for thermal management application using a sustainable powder injection moulding process.  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;andanastuti muchtar;syarif junaidi bin sjarifuddin djalil.  (2018).  powder co-injection molding (2c-pim) of hybrid metal-ceramic powders.  - .  . 

norhamidi muhamad, khairul nizam abdul maulud , ahmad abas kutty, mohd ekhwan hj. toriman, wan juliana wan ahmad , shahrir abdullah, mohd. hasni jaafar, nor ghani md nor, wan zuhairi wan yaacob, jasni yaakub, othman jaafar, maimon abdullah & md pauzi.  (2018).  the proposed nenggiri hydroelectric project, jajahan gua musang, kelantan darul naim.  - .  . 

che hassan bin che haron;ja`afar bin sahari @ shaari;che husna bt. azhari;norhamidi bin muhamad;jaharah bt. a ghani;abu bakar bin sulong.  (2018).  machinability and moldability of high strenght kenaf polymer matrix composites.  - .  . 

norhamidi muhamad, ahmad abas kutty,khairul nizam abdul maulud, md. pauzi abdullah, shahrir abdullah, maimon abdullah, amiruddin ismail, mohd. ekhwan hj. toriman, mohd hasni hj jaafar, nor. ghani md. nor, wan zuhairi wan yaacob & meor zainal meor tali.  (2018).  environmental impact assessment second schedule for the kuala lumpur singapore high speed rail hsr project.  - .  . 

eric jose olmedo panal, mohd juzaiddin ab aziz, norhamidi muhamad & jimena andrea barrera chapparo.  (2016).  mission report: mission offshore programs vietnam.  - .  . 

abu bakar bin sulong, norhamidi bin muhamad, syarif junaidi bin sjarifuddin djalil.  (2015).  novel porous composite (titanium-hydroxyapatite): effect of powder injection molding process parameters on its formability.  - .  . 

mahendra rao a/l somalu, norhamidi bin muhamad, wan ramli bin wan daud, andanastuti muchtar.  (2014).  effect of redox cycling on the durability and performance of ni/scsz cermet for solid oxide fuel cell application.  - .  . 

zaliha wahid, norhamidi muhamad, akmal hilmi mohd mashudi.  (2012).  significant process parameters in injection molding process for plastic and metal materials.  - 3rd international conference on engineering and ict (icei2012).  . 

m.a. mussa, s. abdullah, c.s. nor azwadi and n. muhamad.  (2010).  simulation of rarefied gas flow in slip and transitional regimes.  - european fluid mechanic conference 8.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad & andanastuti muchtar.  (2010).  optimization of compression molding parameters on the properties of composite.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

jovial mahyoedin, jaafar sahari, andanastuti muchtar,& norhamidi muhamad.  (2010).  kesan penambahan karbon hitam terhadap sifat reologi polimer grafit komposit.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

jarot raharjo, a. muchtar, n. muhamad, w.r.w. daud & e.h. majlan.  (2009).  microstructure characterisation of sdc-carbonate composite electrolytes produced by solid state method for solid oxide fuel cells.  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang.  . 

dedikarni, a. muchtar, n. muhamad & w.r.w. daud.  (2009).  delta- bi2o3 thin film coating on gilded gold substrate by electrophoretic deposition method (epd).  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang..  . 

a. muchtar, jarot raharjo, n. muhamad, e.h. majlan and w.r.w. daud.  (2009).  characterisation of sdc-carbonate composite electrolytes for low temperature solid oxide fuel cells.  - international conference on sustainable energy 2009, bandung, indonesia.  . 

s. ahmad, n. muhamad, a. muchtar, j. sahari, k. r. jamaludin, m. h. i. ibrahim and n. h. mohamad nor.  (2009).  optimisation of processing parameters of titanium foams using taguchi method for improved electrical conductivity.  - international conference on sustainable energy 2009, bandung, indonesia.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad, andanastuti mukhtar.  (2009).  the effect of deformation by compression on carbon black as a second filler of composite graphite-pp.  - buku abstrak pascasidang bengkel penulisan manuskrip jurnal dan tesis, 18-19 april 2009, residence hotel, uniten.  . 

yovial mahyoedin, jaafar sahari, andanastuti mukhtar, norhamidi muhamad.  (2009).  dispersed study on electrically conducting composite material.  - buku abstrak pascasidang bengkel penulisan manuskrip jurnal dan tesis, 18-19 april 2009, residence hotel, uniten.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad and andanastuti muchtar.  (2009).  the effects of deformation by compression on composite graphite -pp properties.  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang. malaysia.  . 

n. sastaviana, a. muchtar, w.r.w.daud, n. muhamad & e. h. majlan.  (2009).  material development in intermediate temperature solid oxide fuel cells (it-sofcs) : a review.  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing.  . 

m.s. ahmad yasir, c.h. che hassan, a.g. jaharah, m. norhamidi, h.e. nagi, b. yanuar, a.i. gusri.  (2008).  wear mechanism and performance of pvd coated tungsten carbide when milling of ti-6al-4v under mql.  - 11th cirp conference on modeling of machining operations.  . 

abu bakar mohamad, abdul amir hassan kadhum, wan ramli wan daud, norhamidi muhamad dan mohamad kassim.  (2008).  fabrications of membrane electrode assembly for pemfc applications.  - research prospectus, department of chemical and process engineering, universiti kebangsaan malaysia, bangi.  . 

shahrir abdullah, norhamidi muhamad, riza atiq abdullah o.k. rahmat, baba md deros, noorhisham tan kofli , mardina abdullah.  (2007).  penilaian objektif dan hasil program pendidikan berasaskan hasil (obe): soal selidik majikan industri dan alumni.  - seminar pendidikan kejuruteraan dan alam bina (peka 2007).  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad & andanastuti muchtar.  (2007).  effect of deformation on conductivity of graphite-based polyproplene composite.  - seminar penyelidikan siswazah, 2007.  . 

tulus, ariffin, a. k., abdullah, s. & muhamad.  (2006).  finite element analysis for heat transfer in the insulator on piston pin of a linear generator engine.  - the 2nd imt-gt regional conference on mathematics, statistics and their application (ircmsa 2006).  . 

yovial mahyoedin, jaafar sahari, andanastuti muchtar & norhamidi muhamad.  (2006).  injection molding of bipolar plate: rheological study.  - seminar penyelidikan siswazah 2006 (sps2006).  . 

tan koon tatt, norhamidi muhamad & che hassan che haron.  (2006).  optimization of the molding parameters of metal injection molding process using taguchi method.  - seminar penyelidikan siswazah 2006.  .