Penerbitan SCOPUS/ERA

che hassan che haron, jaharah abdul ghani, muammar faiq azhar, nurul hayati abdul halim, n. badroush.  (2021).  microstructure and microhardness alterations of inconel 718 under cryogenic cutting.  - journal of mechanical engineering.  51-64. 

armansyah ginting, che hassan che haron, issam bencheikh, mohammed nouari.  (2021).  study on characteristics of altin and ticn coating layers deposited on carbide cutting tools in hard turning of steel: experimental, simulation and optimisation.  - international journal of machining and machinability of materials.  88-112. 

ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2021).  green lubrication technique for sustainable machining of aisi 4340 alloy steel.  - jurnal tribologi.  1-19. 

m.s. kasim, n.h.n. husshini, m.s.a. hafiz, w.n.f. mohamad, r. izamshah, j.a ghani, c.h.c haron.  (2021).  particulate matter : monitoring during end milling under different cooling-lubrication strategies.  - journal of applied science and engineering,.  891-900. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

tant koon tatt, norhamidi muhamad, che hassan che haron, abu bakar sulong.  (2020).  parametric optimization of metal injection moulding process using taguchi method.  - the international journal of integrated engineering.  210-219. 

husni nazra abu bakar, jaharah a. ghani , che hassan che haron.  (2020).  influence of rounded cutting-edge radius and machining parameters on surface roughness and tool wear in milling aisi h13 steel under dry and cryogenic machining.  - jurnal tribologi.  52-64. 

shalina sheik muhamad, jaharah a. ghani, che hassan che haron, and hafizal yazid.  (2020).  cryogenic milling and formation of nanostructured machined surface of aisi 4340.  - nanotechnology reviews.  1104-1117. 

shalina sheikh muhamad, jaharah a. ghani, che hassan che haron, hafizal yazid.  (2020).  wear mechanism of a coated carbide tool in cryogenic machining of aisi 4340.  - industrial lubrication and tribology.  509-514. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

farah 'atiqah abdul azam, zakaria razak, mohd khairul fadzly md radzi, norhamidi muhammad, che hassan che haron, and abu bakar sulong.  (2020).  influence of multiwalled carbon nanotubes on the rheological behavior and physical properties of kenaf fiber reinforced polypropylene composites.  - polymers.  1-13. 

nurul hayati abdul halim, che hassan che haron & jaharah abdul ghani.  (2020).  sustainable machining of hardened inconel 718: a comparative study.  - international journal of precision engineering and manufacturing.  1375-1387. 

n.n. nor hamran, j.a. ghani, r. ramli, c.h. che haron.  (2020).  a review on recent development of minimum quantity lubrication for sustainable machining.  - journal of cleaner production.  1-18. 

j.a. ghani, m.n.a.m. dali, h.a. rahman, c.h.c. haron, w.m.f. wan mahmood,m.r.m. rasani, m.z. nuawi.  (2019).  analysis of dimple structure fabricated using turning process and subsequent reduction in friction.  - wear.  1280-1285. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering. 

n. a. kasim, m. z. nuawi, j. a. ghani, m. rizal, m. a. f. ahmad and c. h. che haron.  (2019).  cutting tool wear progression index via signal element variance.  - journal of mechanical engineering and sciences.  4596-4612. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  the study on the properties of ticn coatings processed by cathodic arc physical vapour deposition.  - tribology - materials, surfaces & interfaces.  58-66. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

n.h.a. halim, c.h.c. haron, j.a. ghani, m.f. azhar.  (2019).  tool wear and chip morphology in high-speed milling of hardened inconel 718 under dry and cryogenic co2 conditions.  - wear.  1683-1690. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  surface characterisation of ticxn1x coatings processed by cathodic arc physical vapour deposition: xps and xrd analysis.  - surface and interface analysis.  611-617. 

natasha a. raof, jaharah a. ghani, che hassan che haron.  (2019).  machining-induced grain refinement of aisi 4340 alloy steel under dry and cryogenic conditions.  - journal of materials research and technology.  4347-4353. 

m.s. kasim, m.s.a. hafiz, j.a. ghani, c.h.c. haron, r. izamshah, s.a. sundi, s.b. mohamed, i.s. othman.  (2019).  investigation of surface topology in ball nose end milling process of inconel 718.  - wear.  1318-1326. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi & che hassan che haron.  (2018).  an embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling.  - the international journal of advanced manufacturing technology.  811-823. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairol fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2018).  the effects of maleic anhydride grafted pp (mapp) on the mechanical properties of injection moulded kenaf/cnts/pp composites.  - sains malaysiana. 

n.f. ismail, n. muhamad, a.b. sulong & c.h.c. haron.  (2018).  effects of alkali treatment on mechanical properties of epoxy composites reinforced kenaf fibre using compression moulding process.  - international journal of mechanical & mechatronics engineering. 

mohd shahfizal mohd ruslan, haniff abdul rahman, jaharah abdul ghani, che hassan che haron, mohd shahir kassim, kamal othman.  (2018).  determination of optimum machining condition for surface roughness using historical data.  - international journal of engineering & technology. 

n. badroush, c.h. che haron, j. a. ghani, m.f. azhar, nurul hayati abdul halim.  (2018).  overview and case study of cryogenic cooling in machining of nickel based alloy.  - journal of mechanical engineering. 

jaharah a. ghani, sharudin hassan, mohd nor azam bin mohd dali, che hassan che haron.  (2018).  fabrication of a dimple structure using a machining process on a metallic surface.  - world review of science, technology and sustainable development. 

h. azmi, c.h. che haron, j.a. ghani & m. suhaily.  (2018).  pembandingan kesan faktor pelekangan (fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar.  - sains malaysiana. 

n. badroush, c. h. che haron, j. a. ghani, m. f. azhar, nurul hayati abdul halim.  (2018).  performance of coated carbide tools when turning inconel alloy 718 under cryogenic condition using rsm.  - journal of mechanical engineering. 

shalina sheik muhamad, jaharah a. ghani and che hassan che haron.  (2018).  a review on future implementation of cryogenic machining in manufacturing industry.  - progress in industrial ecology. 

nurul hayati abdul halim, che hassan che haron, jaharah a. ghani and muammar faiq azhar.  (2018).  machining-induced microstructure of inconel 718 in cryogenic environment.  - progress in industrial ecology. 

m.s. asiyah, m.a. sulaiman, r. shahmi, r. zuraimi, e. mohamad, c.h. che haron, j.a. ghani.  (2018).  performance of cvd coated carbide tool by optimizing machining parameters during turning titanium alloy ti-6al-4v eli in flooded condition.  - journal of advanced manufacturing technology. 

husni nazra abu bakar, jaharah a. ghani, che hassan che haron.  (2018).  numerical investigation on effect of rounded cutting edge radius and machining parameters in end milling of aisi h13 tool steel.  - international journal of engineering & technology. 

azmi harun, sia ting ting, che hassan che haron, jaharah a. ghani, suhaily mokhtar.  (2017).  a study on parameter optimization of the delamination factor (fd) in milling kenaf fiber reinforced plastics composite materials using doe method.  - journal of mechanical engineering. 

noorazizi mohamad samsuddin, raja izamshah, mohd shahir kasim, che hassan che haron.  (2017).  evaluation of hole performance and force magnitude on drilling parameter for orthopaedic surgical bone drilling.  - journal of mechanical engineering. 

suhaily mokhtar, che hassan che haron, jaharah a. ghani, azmi harun.  (2017).  evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates.  - journal of mechanical engineering. 

a.h.musfirah, j.a.ghani , c.h.che haron.  (2017).  tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed.  - wear.  125-133. 

m. rizal , j.a.ghani , m.z.nuawi, c.h.c.haron.  (2017).  cutting tool wear classification and detection using multi-sensor signals and mahalanobis-taguchi system.  - wear.  1759-1765. 

sharudin bin hassan, jaharah a. ghani, che hasan che haron, mohd nor azam bin md dali.  (2017).  development of dynamic assisted tooling using triz approach for dimple structure fabrication in milling process.  - journal of mechanical engineering.  23-32. 

nur farhani ismail, norhamidi muhamad, abu bakar sulong, che hassan che haron, dulina tholibon, izdihar tharazi, mohd khairul fadzly mdradzi, zakaria razak.  (2017).  mechanical properties of compression molded epoxy polymer composites reinforced with kenaf fibers.  - journal of mechanical engineering.  1-12. 

mohd nor azam mohd dali, jaharah a. ghani, che hassan che haron, sharudin hassan.  (2017).  fabrication of dimple structured surface of a390 al-si alloy using turning process.  - industrial lubrication and tribology.  348-354. 

jaharah a. ghani, a.r. natasha, c.h. che hassan and j. syarif.  (2016).  triz approach for machining process innovation in cryogenic environment.  - international journal of materials & product technology.  286-297. 

h. azmi, c. h. c haron, j. a. ghani, m. suhaily, a. b. sanuddin and j. h. song.  (2016).  study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology.  - arpn journal of engineering and applied sciences.  4761-4766. 

n.h.m. tahir, r. muhammad, j. a. ghani, m. z. nuawi, c. h. c. haron.  (2016).  monitoring the flank wear using piezoelectric of rotating tool of main cutting force in end milling.  - jurnal teknologi.  45-51. 

mohd shahfizal ruslan, kamal othman, jaharah a.ghani, mohd shahir kassim, che hassan che haron.  (2016).  surface roughness of magnesium alloy az91d in high speed milling.  - jurnal teknologi.  115-119. 

mohd nor azam bin mohd dali, jaharah a. ghani, che hassan che haron, sharudin bin hassan.  (2016).  fem simulation for determining suitable parameters for dimple structure fabrication in turning process.  - international journal of materials & product technology.  218-230. 

m. s. kasim, c. h. che haron, j. a. ghani, m. a. hadi, r. izamshah, t. j. s. anand & s. b. mohamed.  (2016).  cost evaluation on performance of a pvd coated cutting tool during end-milling of inconel 718 under mql conditions.  - transactions of the imf.  175-181. 

nor khairusshima muhamad khairussaleh, che hassan che haron and jaharah a. ghani.  (2016).  study on wear mechanism of solid carbide cutting tool in milling cfrp.  - journal of material research.  1883-1889. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

jaharah a. ghani and che hassan che haron, mohd shahir kasim and mohd amri sulaiman, siti haryani tomadi.  (2016).  wear mechanism of coated and uncoated carbide cutting tool in machining process.  - journal of material research.  1873-1879. 

musfirah abdul hadi, jaharah a. ghani, che hassan che haron and mohd. shahir kasim.  (2016).  effect of cutting speed on the carbide cutting tool in milling inconel 718 alloy.  - journal of materials research.  1885-1892. 

a.r. natasha, j.a. ghani, c.h. che haron, j. syarif, a.h. musfirah.  (2016).  temperature at the tool-chip interface in cryogenic and dry turning of aisi 4340 using carbide tool.  - international journal of simulation modelling.  1-12. 

a. h. musfirah, j. a. ghani, c. h. che haron, m. s. kasim.  (2015).  effect of cutting parameters on cutting zone in cryogenic high speed milling of inconel 718 alloy.  - jurnal teknologi.  1-7. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2015).  development and testing of an integrated rotating dynamometer on tool holder for milling process.  - mechanical systems and signal processing.  559-576. 

p.c. siow, j.a. ghani, r.j. talib, m.j. ghazali, c.h. che haron.  (2015).  characterization using xps and xrd of ti(c,n) coating properties for cutting tool applications.  - interceram: international ceramic review.  287-290. 

a.n. siregar, j.a. ghani, c.h.c. haron, m. rizal, z. yaakob, s.k. kamarudin.  (2015).  comparison of oil press for jatropha oil a- review.  - research in agricultural engineering.  1-13. 

yanda, h.; ghani, j. a.; rizal, m. & che haron, c. h..  (2015).  performance of uncoated and coated carbide tools in turning fcd700 using fem simulation.  - international journal of simulation modelling.  416-425. 

mohd nor azam bin mohd dali, jaharah a. ghani and che hassan che haron.  (2015).  triz approach for analyzing method of dimple structure fabrication.  - arpn journal of engineering and applied sciences.  6257-6262. 

m.a. sulaiman, c.h. che haron, j.a. ghani & m.s. kasim.  (2014).  effect of high-speed parameters on uncoated carbide tool in finish turning titanium ti-6al-4v eli.  - sains malaysiana.  43(1): 111-116. 

m. a. hadi, j. a. ghani, c. h. che haron, m. s. kasim.  (2014).  investigation on wear behavior and chip formation during up-milling and down-milling operations for inconel 718.  - jurnal teknologi (sciences and engineering).  66(3): 15-21. 

natasha a.r., othman h., ghani j.a., che haron c.h., syarif j..  (2014).  chip formation and coefficient of friction in turning s45c medium carbon steel.  - international journal of mechanical and mechatronics engineering.  89 - 92. 

muhammad rizal,b, jaharah a. ghani, mohd zaki nuawi, mohamad amir shafiq mohd tahir, che hassan che haron.  (2014).  a comparative study of i-kaz based signal analysis techniques: application to detect tool wear during turning process.  - jurnal teknologi.  66(3):99-105. 

ali nurrakhmad siregar, wan mohd faizal wan mahmod, jaharah a. ghani, che hassan che haron, muhammad rizal.  (2014).  design and analysis of single screw extruder for jatropha seeds using finite element method.  - research journal of applied sciences, engineering and technology.  7(10):2098-2105. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi and che hassan che haron.  (2014).  a review of sensor system and application in milling process for tool condition monitoring.  - research journal of applied sciences, engineering and technology.  7(10): 2083-2097. 

salah al-zubaidi, jaharah abdul ghani, che hassan che haron.  (2014).  prediction of tool life when end milling of ti6al4v alloy using hybrid learning system.  - arabian journal for science and engineering.  39(6):5095-5111. 

haris jamaluddin, jaharah a. ghani, mohd nizam ab. rahman, baba md. deros.  (2014).  development of training kit for learning taguchi method and design of experiments.  - jurnal teknologi.  68(4): 19-25. 

m. s. said, j. a. ghani, r. othman, m. a. selamat, n. n. wand, che hassan, c. h..  (2014).  surface roughness and chip formation of alsi/ain metal matrix composite by end milling machining using the taguchi method.  - jurnal teknologi.  68(4): 13-17. 

s. h. tomadi, j. a. ghani, c. h. che haron, m. s. kasim, a. r. daud.  (2014).  optimization of cutting parameters of multiple performance characteristics in end milling of alsi/ain mmctaguchi method and grey relational analysis.  - jurnal teknologi.  68(4):33-40. 

abdullah ismail, jaharah a. ghani, mohd nizam ab rahman, baba md deros, and che hassan che haron.  (2014).  application of lean six sigma tools for cycle time reduction in manufacturing: case study in biopharmaceutical industry.  - arabian journal for science and engineering.  1449-1463. 

jaharah a. ghani, muhammad rizal, che hassan che haron.  (2014).  performance of green machining: a comparative study of turning ductile cast iron fcd700.  - journal of cleaner production.  289-292. 

ms kasim, ch che haron, ja ghani, ma azam, rizamshah, ma md ali and ms a aziz.  (2014).  the influence of cutting parameter on heat generation in high-speed milling inconel 718 under mql condition.  - journal of scientific & industrial research.  73:62-65. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2014).  a wireless system and embedded sensors on spindle rotating tool for condition monitoring.  - advanced science letters.  1829-1832. 

s.h. tomadi, j.a. ghani, c.h. che haron, m.s. kasim, m.h. abd kadir and a.r. daud.  (2013).  surface integrity of newly developed of alsi/aln metal matrix composite during end milling under dry cutting conditions.  - journal of applied sciences, engineering and technology.  6(6):1129-1134. 

m.k. nor khairusshima, c.h. che hassan, a.g. jaharah, a.k.m. amin, a.n. md idriss.  (2013).  effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic.  - wear.  302:1113-1123. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2013).  online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system.  - applied soft computing.  13(4):1960-1968. 

a.a. lashlem, d.a. wahab, s. abdullah and c.h. che haron.  (2013).  a review on end-of-life vehicle design process and management.  - journal of applied sciences.  13(5):654-662. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2013).  prediction of surface roughness when end milling ti6al4v alloy using adaptive neurofuzzy inference system.  - modelling and simulation in engineering.  2013:Article ID 932094. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

jaharah a. ghani, che hassan che haron, siti hartini hamdan, ahmad yasir md said, siti haryani tomadi.  (2013).  failure mode analysis of carbide cutting tools used for machining titanium alloy.  - ceramics international.  39(4):4449-4456. 

m.s. kasim, c.h. che haron, j.a. ghani, a.i. gusri, m.z.a. yazid & m.a. sulaiman.  (2013).  tool life of tialn pvd coated carbide tool in high-speed end milling of untreated inconel 718 under minimum quantity lubrication condition.  - sains malaysiana.  42(12):1721-1726. 

m.s. kasim, c.h. che haron, j.a. ghani, m.a. sulaiman, m.z.a. yazid.  (2013).  wear mechanism and notch wear location prediction model in ball nose end milling of inconel 718.  - wear.  302:1171-1179. 

salah al-zubaidi, jaharah a. ghani, che hassan che haron.  (2013).  optimization of cutting conditions for end milling of ti6al4v alloy by using a gravitational search algorithm (gsa).  - meccanica.  48(7):1701-1715. 

a.r. natasha, j.a. ghani, c.h.c. haron, j. syarif.  (2012).  the effect of cryogenic application on surface integrity in manufacturing process: a review.  - journal of applied sciences research.  8(9):4880-4890. 

jaharah a. ghani, poh siang jye, che hassan che haron, muhammad rizal, mohd zaki nuawi.  (2012).  relationship between measurement of cutting force and sensor location in turning process.  - jurnal teknologi.  59:91-94. 

m.a. sulaiman, c.h. che haron, j.a. ghani, m.s. kasim.  (2012).  the study of wear process on uncoated carbide cutting tool in machining titanium alloy.  - journal of applied sciences research.  8(9):4821-4827. 

n. khairusshima, m. k., che hassan, c. h, jaharah, a. g, amin, a. k. m..  (2012).  the effect of milling parameters on laminated carbon fibre reinforced plastic (cfrp).  - jurnal teknologi.  59(2):203-207. 

siow ping chuan, jaharah a. ghani, siti haryani tomadi and che hassan che hassan.  (2012).  analysis of ti-base hard coating performance in machining process: a review.  - journal of applied sciences.  12(8):1882-1890. 

jaharah a. ghani, poh siang jye, che hassan che haron, muhammad rizal, mohd zaki nuawi.  (2012).  determination of sensor location for cutting tool deflection using finite element method simulation.  - proceedings of the institution of mechanical engineers, part c: journal of mechanical engineering science.  226(9):2373-2377. 

e.a. azrulhisham, d.a. wahab, s. abdullah, n. nikabdullah, c.h. che haron.  (2012).  inverse power law model for extrapolation of fatigue life curves.  - international review of mechanical engineering.  6(3):685-690. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2012).  application of artificial neural networks in prediction tool life of pvd coated carbide when end milling of ti6al4v alloy.  - international journal of mechanics.  6(3):179-186. 

j. a. ghani, m. rizal, m. zaki nuawi, c. h. che haron.  (2012).  development of an adequate online tool wear monitoring system in turning process using low cost sensor.  - advanced science letters.  13:702-706. 

jaharah a. ghani, yeong shoot kian, stephanie tan chia ven, zahira yaakob, and che hassan che haron.  (2012).  performance of biodegradable palm oil coolant in machining process.  - journal of biobased materials and bioenergy.  6:1-4. 

aminah ishak, jaharah a. ghani, che hassan che haron.  (2012).  penentuan faktor yang mempengaruhi daya dan taburan tegasan semasa pemesinan besi tuangan mulur (fcd 500) secara simulasi.  - sains malaysiana.  41(12):1605-1612. 

gusri akhyar ibrahim, che hassan che haron, jaharah abdul ghani, ahmad yasir moh. said, and moh. zaid abu yazid.  (2011).  performance of pvd-coated carbide tools when turning inconel 718 in dry machining.  - advances in mechanical engineering.  Article ID 790975:1-7. 

j. a. ghani, k. othman, m. n. a. rahman, b. m. deros and c. h. c. haron.  (2011).  machined surface of fcd 700 ductile cast iron in a dry turning environment using carbide tools.  - international journal of mechanical and materials engineering.  6(3):362-366. 

a.a. lashlem, dzuraidah abd wahab, shahrum abdullah and che hassan che haron.  (2011).  design assessment for reusability of an automotive safety beam.  - australian journal of basic and applied sciences.  5(11):167-175. 

s.h. tomadi, j.a. ghani, che hassan c.h., a.r. daud.  (2011).  effect of machining parameters on the tool wear and surface roughness of al-aln mmc in end milling machining.  - engineering e-transaction.  6(2):159-163. 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624. 

jaharah a. ghani, muhammad rizal, ahmad sayuti, mohd zaki nuawi, rizauddin ramli, baba deros, che hassan che haron.  (2011).  online tool wear monitoring using portable digital assistant (pda).  - international journal of the physical sciences.  6(16):3952-3957. 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2011).  modeling and simulation of temperature generated on work piece and chip formation in orthogonal machining.  - international review of mechanical engineering.  5(2):340-348. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2011).  application of ann in milling process: a review.  - modelling and simulation in engineering.  art. no. 696275. 

e. a. azrulhisham, y. m. asri, a. w. dzuraidah, n. m. nik abdullah, a. shahrum, and c. h. che hassan.  (2010).  evaluation of fatigue life reliability of steering knuckle using pearson parametric distribution model.  - international journal of quality, statistics, and reliability.  Article ID 816407. 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2010).  effect of rake angle on stress, strain and temperature on the edge of carbide cutting tool in orthogonal cutting using fem simulation.  - itb journal of engineering science.  42B(2):179-194. 

g.a. ibrahim, c.h. che haron, j.a. ghani, h. arshad.  (2010).  taguchi optimization method for surface roughness and material removal rate in turning of ti-6al-4v eli.  - international review of mechanical engineering (ireme).  4(3):216-221. 

h. yanda, j.a. ghani, m.n.a.m. rodzi, k. othman and c.h.c. haron.  (2010).  optimization of material removal rate, surface roughness and tool life on conventional dry turning of fcd700.  - international journal of mechanical and materials engineering (ijmme).  5(2):182-190. 

muhammad marsudi, dzuraidah abd wahab, lily amelia & che hassan che haron.  (2009).  peningkatan keupayaan pembangunan produk baru melalui pemodelan matematik.  - sains malaysiana.  38(6):901-909. 

lily amelia, d.a. wahab, c.h. che haron, n. muhamad, c.h. azhari.  (2009).  initiating automotive component reuse in malaysia.  - journal of cleaner production.  17(17):1572-1579. 

g. a. ibrahim, c. h. che haron and j. a. ghani.  (2009).  progression and wear mechanism of cvd carbide tools in turning ti-6al-4v eli.  - international journal of mechanical and materials engineering (ijmme).  4(1):35-41. 

a. g. jaharah, i. a. choudhury, h.h. masjuki and c. h. che hassan.  (2009).  surface integrity of aisih13 tool steel in end milling process.  - international journal of mechanical and materials engineering (ijmme).  4(1):88-92. 

g.a. ibrahim, c.h. che haron, j.a. ghani.  (2009).  the effect of dry machining on surface integrity of titanium alloy ti-6a1-4v eli.  - journal of applied sciences.  9(1):121-127. 

a. g. jaharah, mohd nor azmi mohd rodzi, a. abdul rahman, mohd nizam ab. rahman and c. h. che hassan.  (2009).  machinabilty of fcd 500 ductile cast iron using coated carbide tool in dry machining condition.  - international journal of mechanical and materials engineering (ijmme).  4(3):279-284. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

zainal rasyid mahayuddin, haslina arshad, che hassan che haron.  (2009).  pengintegrasian vrml dengan java dalam simulasi sistem masa nyata proses kisar hujung maya.  - sains malaysiana.  38(6):911-919. 

jaharah a.g, wahid s.w, che hassan c.h, nuawi m.z, mohd nizam ab rahman.  (2009).  the effect of uncoated carbide tool geometries in turning aisi 1045 using finite element analysis.  - european journal of scientific research.  28(2):271-277. 

jaharah a.g, che hassan c.h, muhamad n.  (2009).  machined surface of aisi h13 tools steels when end milling using p10 tin coated carbide tools.  - european journal of scientific research.  26(2):247-254. 

kadirgama k., noor m.m., rahman m.m., rejab m.r.m., haron c.h.c., abou-el-hossein k.a..  (2009).  surface roughness prediction model of 6061-t6 aluminium alloy machining using statistical method.  - european journal of scientific research.  25(2):250-256. 

kadirgama k., noor m.m., rahman m.m., harun w.s.w., haron c.h.c..  (2009).  finite element analysis and statistical method to determine temperature distribution on cutting tool in end-milling.  - european journal of scientific research.  30(3):451-463. 

ibrahim, g.a., che haron, c.h., ghani, j.a..  (2009).  surface integrity of ti-6al-4v eli when machined using coated carbide tools under dry cutting condition.  - international journal of mechanical and materials engineering.  4(2):191-196. 

c. h. che haron, j. a. ghani, y. burhanuddin, y. k. seong, c. y. swee.  (2008).  copper and graphite electrodes performance in electrical-discharge machining of xw42 tool steel.  - journal of materials processing technology.  201(1-3):570-573. 

haslina arshad, zainal rasyid mahayuddin, che hassan che haron, rosilah hassan.  (2008).  flank wear simulation of a virtual end milling process.  - european journal of scientific research.  24(1):148-156. 

nagi elmagrabi, che hassan c.h., jaharah a.g., f. m. shuaeib.  (2008).  high speed milling of ti-6al-4v using coated carbide tools.  - european journal of scientific research.  22(2):153-162. 

m. m. rahman, a. k. ariffin, n. jamaludin, c. h. c. haron, rosli a. bakar.  (2008).  fatigue life prediction of two-stroke free piston engine mounting using frequency response approach.  - european journal of scientific research.  22(4):480-493. 

r. fadhila, a.g. jaharah, m.z. omar, c.h.c. haron, m.j. ghazali, and c. h. azhari.  (2007).  austenite formation of steel-3401 subjected to rapid cooling process.  - int. j of mech and material.  2(2):150-153.