Penerbitan SCOPUS/ERA

n.j. suang, w.f.h. w. zamri, m.f.m. din, a. shamsudeen, i. f. mohamed, a.k. ariffin.  (2021).  effects of layer addition on hardness of a multi-layered tialn and tin coating.  - solid state technology.  7339-7351. 

mahammadsalman warimani, muhammad hanafi azami, sher afghan khan, ahmad faris ismail, sanisah saharina, ahmad kamal ariffin.  (2021).  internal flow dynamics and performance of pulse detonation engine with alternative fuels.  - energy.  1-10. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin & d. schramm.  (2021).  computing low-frequency vibration energy with hölder singularities as durability predictive criterion of random road excitation.  - soft computing.  6469-6487. 

l. abdullah, s.s.k. singh, s. abdullah, a.h. azman, a.k. ariffin.  (2021).  fatigue reliability and hazard assessment of road load strain data for determining the fatigue life characteristics.  - engineering failure analysis.  1-14. 

leong chee yau, wan fathul hakim w. zamri, muhammad faiz md din, ahmad kamal ariffin, intan fadhlina mohamed.  (2021).  influences of coefficient of frictions on the contact behavior for ball bearings.  - solid state technology.  4387-4394. 

u. bhardwaj, a.p. teixeira, c. guedes soares, a.k. arifin, s.s. singh.  (2021).  evidence based risk analysis of fire and explosion accident scenarios in fpsos.  - reliability engineering & system safety.  1-16. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin and d. schramm.  (2021).  neuro-fuzzy fatigue life assessment using the wavelet-based multifractality parameters.  - journal of mechanical science and technology.  439-447. 

c.h. chin, s. abdullah, s.s.k. singh, d. schramm, a.k. ariffin.  (2021).  durability prediction of coil spring through multibody-dynamics-based strain generation.  - mechanical systems and signal processing.  580-601. 

syahril amir mohd, kok beng gan, ahmad kamal ariffin.  (2021).  development of medical drone for blood product delivery: a technical assessment.  - international journal of online and biomedical engineering.  183-196. 

shahrum abdullah, salvinder singh karam singh, abdul hadi azman, muhamad razuhanafi mat yazid, hawa hishamuddin, wan aizon wan ghopa, aini hazwani shahrir, ahmad kamal ariffin mohd ihsan, dzuraidah abd. wahab.  (2020).  assessing the safety behaviour of the bus express driving condition from the passengers perspective.  - international journal of integrated engineering.  27-33. 

c.h. chin, s. abdullah, s.s.k. singh, a.k. ariffin, d. schramm.  (2020).  durability assessment of suspension coil spring considering the multifractality of road excitations.  - measurement.  1-14. 

mohammed suleman aldlemy, mohammad rasidi rasani, a. k. ariffin, t. m. y. s. tuan ya.  (2020).  adaptive mesh refinement immersed boundary method for simulations of laminar flows past a moving thin elastic structure.  - journal of hydrodynamics.  148-160. 

leong chee yau, wan fathul hakim w. zamri, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2020).  an elasto-plastic ball bearing contact with bilinear hardening.  - international journal of innovative technology and exploring engineering.  438-445. 

lennie abdullah, salvinder singh karam singh, shahrum abdullah, abdul hadi azman, ahmad kamal ariffin and yat sheng kong.  (2020).  the needs of power spectral density in fatigue life prediction of heavy vehicle leaf spring.  - journal of mechanical science and technology.  2341-2346. 

s.s.k. singh , s. abdullah, a.k. ariffin.  (2020).  fatigue reliability assessment in time domain using stochastic- induced random stress loads due to limited experimental data.  - engineering failure analysis.  1-15. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, ahmad kamal ariffin, muhammad faiz md din, intan fadhlina mohamed, guanyu deng.  (2020).  the effect of tialn-based and alcrn-based coatings towards mechanical properties on punch tools using finite element method.  - jurnal tribologi.  65-79. 

m.z. umar, v. vavilov, h. abdullah, a.k. ariffin.  (2019).  quantitative study of local heat sources by ultrasonic infrared thermography: an approach for estimating total energy released by low energy impact damage in c/c composite.  - composites part b.  167-173. 

sinan q. salih, mohammed suleman aldlemy, mohammad rasidi rasani, a. k. ariffin, tuan mohammad yusoff shah tuan ya, nadhir al-ansari, zaher mundher yaseen & kwok-wing chau.  (2019).  thin and sharp edges bodies-fluid interaction simulation using cut-cell immersed boundary method.  - engineering applications of computational fluid mechanics.  860-877. 

wan fathul hakim w zamri, ng jie suang, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2019).  modelling of nanoindentation of tialn and tin thin film coatings for automotive bearing.  - international journal of recent technology and engineering (ijrte).  7197-7199. 

mohammad rasidi rasani, ahmad kamal ariffin, musa bashir, jin wang.  (2019).  effect of location in a cylinder wake on dynamics of a flexible energy harvesting plate.  - journal of advanced research in fluid mechanics and thermal sciences.  189-198. 

mohammed suleman aldlemy, mohammad rasidi rasani, t. m. y. s. tuan, ahmad kamal ariffin.  (2019).  dynamic adaptive mesh refinement of fluid-structure interaction using immersed boundary method with two-stage corrections.  - scientia iranica transactions b: mechanical engineering.  2827-2838. 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2019).  the analysis of fatigue lifetime using markov chain model based on randomization paris law equation.  - international journal of innovative technology and exploring engineering.  282-286. 

mohammad rasidi rasani, hazim moria, michael beer, ahmad kamal ariffin.  (2019).  vibration performance of a flow energy converter behind two side-by-side cylinders.  - journal of marine science and engineering.  1-14. 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2019).  the analysis of fatigue lifetime using markov chain model based on randomization paris law equation.  - international journal of innovative technology and exploring engineering.  282-286. 

n.i.i. mansor, s. abdullah, a.k. ariffin.  (2019).  effect of loading sequences on fatigue crack growth and crack closure in api x65 steel.  - marine structures. 

lennie abdullah, salvinder singh karam singh, abdul hadi azman, shahrum abdullah, ahmad kamal ariffin mohd ihsan and yat sheng kong.  (2019).  fatigue life-based reliability assessment of a heavy vehicle leaf spring.  - international journal of structural integrity.  726-736. 

dinesh ragurajan, mohsen golieskardi, meenaloshini satgunam, md enamul hoque, angela min hwei ng, mariyam jameelah ghazali, ahmad kamal ariffin.  (2018).  advanced 3y-tzp bioceramic doped with al2o3 and mno2 particles potentially for biomedical applications: study on mechanical and degradation properties.  - journal of materials research and technology. 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2018).  the analysis of initial probability distribution in markov chain model for lifetime estimation.  - international journal of integrated engineering. 

ammer ezhar mohd razalli, dzuraidah abd. wahab, ahmad kamal ariffin mohd ihsan.  (2018).  durability studies of remanufacturable components for extended life cycle.  - journal of mechanical engineering. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin.  (2018).  establishing energy-damage relationship for fatigue data editing of strain loading history.  - international review of mechanical engineering (i.re.m.e.). 

noor shieela kalib, andanastuti muchtar, mahendra rao somalu, ahmad kamal ariffin mohd ihsan, nurul ashikin mohd nazrul aman, nurul akidah baharuddin.  (2018).  factors influencing thermal stress development in solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences. 

siti sarahjanuri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, and shahrum abdullah.  (2018).  initial probability distribution in markov chain model for fatigue crack growth problem.  - international journal of engineering & technology. 

siti sarah kamaludin, prakash thamburaja, ahmad kamal ariffin.  (2018).  atomistic simulations of twist grain boundary structures in aluminum-magnesium alloys.  - international journal of engineering & technology. 

d.a. wahab, e. blanco-davis, a.k. ariffin, j. wang.  (2018).  a review on the applicability of remanufacturing in extending the life cycle of marine or offshore components and structures.  - ocean engineering. 

a.h. azman, s.s.k. singh , w.g.w. aizon, h. hishamuddin, m.r.m. yazid, s. abdullah, a.k. ariffin, d. a. wahab, r. atiq, m.s. solah, a. hamzah.  (2018).  the needs to establish an integrated safety system for express bus.  - international journal of engineering & technology.  1537-1540. 

m. mahmud, s. abdullah, a. k. ariffin & m. z. nopiah.  (2018).  on the need to adopt strain-based probabilistic approach in predicting fatigue life.  - journal of the brazilian society of mechanical sciences and engineering.  1-13. 

m. mahmud, s. abdullah, s. s. k. singh, a. k. ariffin, z. m. nopiah and a. arifin.  (2018).  distribution characterisation of coil spring strain histories using mixed weibull analysis.  - international journal of engineering & technology. 

chin chuin hao, shahrum abdullah, ahmad kamal ariffin and salvinder singh karam singh.  (2018).  durability analysis for coil spring suspension based on strain signal characterization.  - international journal of engineering & technology. 

m. mahmud, s. s. k. singh, s. abdullah, a. k. ariffin, z. m. nopiah.  (2018).  determining damaging fatigue cycles under influence of random loadings using the root-mean-square level.  - journal of mechanical engineering. 

m. mahmud, s. s. k. singh, s. abdullah , a. k. ariffin, z. m. nopiah.  (2018).  determining daming fatigue cycles under influence of random loadings using the root-mean-square level.  - journal of mechanical engineering. 

s. fonna, gunawarman, s. huzni, a.k. ariffin.  (2018).  boundary element inverse analysis for rebar corrosion detection: study on the 2004 tsunami-affected structure in aceh.  - case studies in construction materials.  292-298. 

ammar adil al-bakri, zainuddin sajuri, ahmad kamal ariffin, mohammed abdul razzaq and mohd salehudin fafmin.  (2017).  fatigue properties of strained thin 304 stainless steel sheets.  - international journal of automotive and mechanical engineering.  4171-4182. 

m. z. umara, v. p. vavilov, h. abdullah, and a. k. ariffin.  (2017).  detecting low-energy impact damages in carbon-carbon composites by ultrasonic infrared thermography.  - russian journal of nondestructive testing.  530-538. 

m. r. m. akramin, a. k. ariffin, masanori kikuchi & s. abdullah.  (2017).  sampling method in probabilistic s-version finite element analysis for initial flaw size.  - journal of the brazilian society of mechanical sciences and engineering.  357-365. 

chandra d., putra i.s., ariffin a.k., mardi n.a., nukman y., purbolaksono j..  (2016).  fatigue growth analysis of a surface crack in a solid cylinder under combined cyclic axial-torsion loading.  - experimental techniques.  1397-1407. 

rashid s., islami n., ariffin a.k., ridha m., fauna s..  (2016).  the effect of immersion time on the corrosion behavior of sus304 in brine using half-cell potential measurement.  - jurnal teknologi.  91-99. 

senin a., nopiah z.m., ihsan a.k.a.m., abdullah s., wahab d.a., jamaludin m.j., zakaria a..  (2016).  johnson cook constitutive modeling for austenite metal in hot forming process.  - jurnal teknologi.  71-75. 

d. ragurajan, m. satgunam, m. golieskardi, a.k. ariffin and m.j. ghazali.  (2016).  effect of air sintering on microstructural and mechanical properties of aluminum oxide / manganese oxide doped y- tzp.  - journal of the australian ceramic society.  128-133. 

fonna s., ibrahim i.m., ridha m., huzni s., ariffin a.k..  (2016).  simulation of the ill-posed problem of reinforced concrete corrosion detection using boundary element method.  - international journal of corrosion.  1-5. 

othman a., abdullah s., ariffin a.k., mohamed n.a.n..  (2016).  investigating the crushing behavior of quasi-static oblique loading on polymeric foam filled pultruded composite square tubes.  - composites part b: engineering.  493-514. 

al-bakri a.a., sajuri z., ariffin a.k., razzaq m.a., fafmin m.s..  (2016).  tensile and fracture behaviour of very thin 304 stainless steel sheet.  - jurnal teknologi.  45-50. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2016).  finite element analysis and crashworthiness optimization of foam-filled double circular under oblique loading.  - latin american journal of solids and structures.  2176-2189. 

s.a.n. mohamed, s. abdullah, a. arifin, a.k. ariffin, and m.m. padzi.  (2016).  characterization of the biaxial fatigue behaviour on medium carbon steel using the strain-life approach.  - international journal of automotive and mechanical engineering.  3262-3277. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2015).  optimization of foam-filled double circular tubes under axial and oblique impact loading conditions.  - thin-walled structures.  1-11. 

nopiah z.m., junoh a.k., ariffin a.k..  (2015).  vehicle interior noise and vibration level assessment through the data clustering and hybrid classification model.  - applied acoustics.  9-22. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2015).  non-linear finite element analysis of bitubal circular tubes for progressive and bending collapses.  - international journal of mechanical sciences.  228-236. 

a. arifin, w.z.w. jusoh, s. abdullah, n. jamaluddin and a.k. ariffin.  (2015).  investigating the fatigue failure characteristics of a283 grade c steel using magnetic flux detection..  - steel and composite structures.  601-614. 

m. imran, s.f. eric lim, i.s. putra, a.k. ariffin, c.j. tan, j. purbolaksono.  (2015).  assessment of a planar inclusion in a solid cylinder.  - engineering failure analysis.  236-246. 

m.r. jamli, a.k. ariffin, d.a. wahab.  (2015).  incorporating feedforward neural network within finite element analysis for l-bending springback prediction.  - expert systems with applications.  2604-2614. 

f. djamaluddin, s. abdullah, a.k. arrifin and z.m. nopiah.  (2015).  modeling and optimization of aluminum foam cylindrical double tubes under axial impact.  - journal of mechanical engineering and sciences.  1383-1392. 

mohammad syuhaimi ab-rahman, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, azamin zaharim & afiq hipni.  (2015).  young lecturers` catalyst technique towards excellent research culture in malaysia scenario.  - asian social science.  1-13. 

mohammad syuhaimi ab-rahman, shahrom md zain, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, azamin zaharim, muhamad fadhil sukarna & afiq hipni.  (2015).  achieving quality in research through stimulated publication technique.  - asian social science.  14-25. 

zulkifli mohd nopiah, ahmad kadri junoh and ahmad kamal ariffin.  (2015).  a novel hybrid fuzzy nonlinear weighted goal programming for optimising interior acoustics level in car cabin.  - journal of vibration and control.  1721-1744. 

eshkoor r.a., ude a.u., sulong a.b., zulkifli r., ariffin a.k., azhari c.h..  (2015).  energy absorption and load carrying capability of woven natural silk epoxy - triggered composite tubes.  - composites part b: engineering.  10-18. 

ab-rahman m.s., nor m.j.m., ihsan a.k.a.m., zaharim a., hipni a..  (2015).  young lecturers' catalyst technique towards excellent research culture in malaysia scenario.  - asian social science.  1-13. 

m.r. jamli, a.k. ariffin, d.a. wahab.  (2014).  integration of feedforward neural network and finite element in the draw-bend springback prediction.  - expert systems with applications.  3662-3670. 

nopiah z.m., junoh a.k., ariffin a.k..  (2014).  computational method for predicting the effects of vibrations to acoustical comfort in vehicle cabin.  - international journal of vehicle noise and vibration.  150 - 170. 

othman a., abdullah s., ariffin a.k., mohamed n.a.n..  (2014).  investigating the quasi-static axial crushing behavior of polymeric foam-filled composite pultrusion square tubes.  - materials and design.  446 - 459. 

m. b. ali, s. abdullah, m. z. nuawi, a. k. ariffin, z. m. nopiah.  (2014).  evaluating instrumented charpy impact strain signals using curve fitting equations.  - journal of central south university.  21(2):600-609. 

a. shamsudeen, s. abdullah, a.k. ariffin, m.r.m. rasani and y. ali.  (2014).  design and simulation of a cylinder head structure for a compressed natural gas direct injection engine.  - international journal of automotive and mechanical engineering.  9:1620-1629. 

n. i. i. mansor, s. abdullah, a. k. ariffin & j, syarif.  (2014).  a review of the fatigue failure mechanism of metallic materials under a corroded environment.  - engineering failure analysis.  42 (2014) 353-365. 

r.a. eshkoor, a.u. ude, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2014).  failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism.  - international journal of impact engineering.  53-61. 

a. m. t. ariffin, s. abdullah, md. rafiquzzaman, r. zulkifli, d. a. wahab & a. k. ariffin.  (2014).  investigation of the behaviour of a chopped strand mat/woven roving/foam-klegecell composite lamination structure during charpy testing.  - materials and design.  59:475-485. 

a.u. ude, r.a. eshkoor, r. zulkifili, a.k. ariffin, a.w. dzuraidah, c.h. azhari.  (2014).  bombyx mori silk fibre and its composite: a review of contemporary developments.  - materials and design.  57(2014):298-305. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  ungkapan kamiran-j retak permukaan pada bar silinder padu kenaan beban ragam i.  - jurnal teknologi (sciences and engineering).  7 - 17. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  j-integral evaluation of surface cracks in round bar under mode iii loadings.  - research journal of applied sciences, engineering and technology.  1985 - 1993. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes.  - materials and design.  47:248-257. 

a.u. ude, a.k. ariffin, c.h. azhari.  (2013).  impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials.  - international journal of impact engineering.  58:31-38. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes.  - composites part b: engineering.  55:5-10. 

s. fonna, s. huzni, m. ridha, a.k. ariffin.  (2013).  inverse analysis using particle swarm optimization for detecting corrosion profile of rebar in concrete structure.  - engineering analysis with boundary elements.  37:585-593. 

zulkifli mohd nopiah, ahmad kadri junoh and ahmad kamal ariffin.  (2013).  noise annoyance fuzzy index in passenger car cabin.  - international journal vehicle noise and vibration.  216-233. 

nuraini, aa; ihsan, akam; nor, mjm; jamaluddin, n.  (2013).  vibro-acoustic analysis of free piston engine structure using finite element and boundary element methods.  - journal of mechanical science and technology.  26(8):2405-2411. 

r. daud, a.k. ariffin and s. abdullah.  (2013).  validation of crack interaction limit model for parallel edge cracks using two-dimensional finite element analysis.  - international journal of automotive and mechanical engineering.  993-1004. 

ude, a.u., ariffin, a.k., azhari, c.h..  (2013).  an experimental investigation on the response of woven natural silk fiber/epoxy sandwich composite panels under low velocity impact.  - fibers and polymers.  14(1):127-132. 

zulkifli mohd nopiah, ahmad kadri junoh, ahmad kamal ariffin.  (2013).  formulation of weighted goal programming using the data analysis approach for optimising vehicle acoustics levels.  - international journal of acoustics and vibration.  18(3):124-133. 

oshkovr, sa; taher, st; oshkour, aa; ariffin, ak; azhari, ch.  (2013).  finite element modelling of axially crushed silk/epoxy composite square tubes.  - composite structures.  95:411-418. 

zulkifli mohd nopiah, ahmad kadri junoh, ahmad kamal ariffin.  (2013).  optimisation of acoustical comfort in vehicle cabin using goal programming.  - international journal of vehicle noise and vibration.  9(3):194-215. 

mohammad syuhaimi ab-rahman, norsyuhadah norzalwi, kasmiran jumari, shahrom md zain, ahmad kamal ariffin mohd ihsan, azami zaharim, mohd jailani mohd nor.  (2012).  research unit: definition and resurrection strategy.  - journal of engineering and applied sciences.  7(2):202-206. 

mohammad syuhaimi ab-rahman, norsyuhadah norzalwi, kasmiran jumari, shahrom md zain, ahmad kamal ariffin mohd ihsan, azami zaharim and mohd jailani mohd nor.  (2012).  publication factor : strategies and planning.  - journal of engineering and applied sciences.  7(2):198-201. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali.  (2012).  stress intensity factors for surface cracks in round bar under single and combined loadings.  - meccanica.  47:1141-1156. 

s.a. oshkovr, r.a. eshkoor, s.t. taher, a.k. ariffin, c.h. azhari.  (2012).  crashworthiness characteristics investigation of silk/epoxy composite square tubes.  - composite structures.  94(8):2337-2342. 

a. e. ismail, a. k. ariffin, s. abdullah & m. j. chazali.  (2012).  stress intensity factors under combined tension and torsion loadings.  - indian journal of engineering & materials sciences.  19:5-16. 

beden, s.m., abdullah, s., ariffin, a.k..  (2012).  fatigue crack growth rate of api x70 steel pipelines under spectrum loading.  - international journal of pressure vessels and piping.  96-97:7-12. 

n.a. khadim, s. abdullah & a.k. ariffin.  (2012).  effective strain damage model associated with finite element modelling and experimental validation.  - international journal of fatigue.  36(1):194-205. 

mohammad syuhaimi ab-rahman, nor shaadah roslani, kasmiran jumari, shahrom md zain, afiq hipni, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan and azami zaharim.  (2012).  requirements for a postgraduate engineering student before and during starting research.  - journal of engineering and applied sciences.  7(1):17-22. 

mohammad syuhaimi ab-rahman, kasmiran jumari, shahrom md zain, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan and azami zaharim.  (2012).  easy research: strategy towards excellency and unstressful research.  - journal of engineering and applied sciences.  7(1):53-59. 

s. ataollahi, s.t. taher, r.a. eshkoor, a.k. ariffin, c.h. azhari.  (2012).  energy absorption and failure response of silk/epoxy composite square tubes: experimental.  - composites: part b.  43(2):542-548. 

n.h. mohamad nor, n. muhamad, a.k. ariffin, m. ruzi, k.r. jamaludin and a. sufizar.  (2011).  injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis.  - journal of applied sciences.  11(10):1833-1838. 

a.u. ude, a.k. ariffin, a.a. lashlem and c.h. azhari.  (2011).  drop weight impact response of woven natural silk/epoxy laminated composite plates.  - australian journal of basic and applied sciences.  5(6):289-295. 

mohammad syuhaimi ab-rahman, shahrom md zain, ahmad kamal ariffin mohd ihsan, azami zahrim, mohd jailani mohd nor, mohd fauzi mohd zain, nor shaadah roslani, afiq hipni, nurfarah liza, mohd fadhil.  (2011).  effective supervision strategies in improving the quality and quantity of research.  - international business management.  5(6):312-318. 

m.m. rahman, a.k. ariffin, s.s.m. nor & h.y. rahman.  (2011).  powder material parameters establishment through warm forming route.  - materials and design.  32(1):264-271. 

mohammad syuhaimi ab-rahman, shahrom md zain, afiq hipni, mohd jailani mohd nor, ahmad kamal ariffin mohd ihsan, nur farah liza ramli, muhamad fadhil che sukarna, nor shaadah roslani, nurul huda abdul.  (2011).  high quality students by improving research supervision.  - the social sciences.  6(5):344-349. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, othman inyatullah, ahmad kamal.  (2011).  evaluation of seat vibration sources in driving condition using spectral analysis.  - journal of engineering science and technology.  6(3):342-358. 

abdul razzaq m., ariffin a.k., al-shafie a., abdullah s., sajuri z., kadhim n.a..  (2011).  fatigue life modelling under constant amplitude loading using adaptive neuro - fuzzy (anfis) application.  - australian journal of basic and applied sciences.  5(8):1194-1204. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2011).  probabilistic high cycle multiaxial fatigue analysis using finite element method.  - transactions hong kong institution of engineers.  18(2):13-18. 

m.h. nahi, a. ismail & a.k. ariffin.  (2011).  analysis of asphalt pavement under nonuniform tire-pavement contact stress using finite element method.  - journal of applied sciences.  11(14): 2562-2569. 

mohammad syuhaimi ab-rahman, kasmiran jumari, shahrom md zain et al....  (2011).  introduction to research, sub-breaking and ethics: the first knowledge before starting the research empire.  - the social sciences.  6(5):386-390. 

s. y. ang and a. k. ariffin.  (2011).  structural fatigue reliability assessment using modified monte carlo simulation.  - journal of the institution of engineers malaysia (iem).  72(1):2-10. 

a. e. ismail, a. k. ariffin, s. abdullah and m. j. ghazali.  (2011).  off-set crack propagation analysis under mixed mode loadings.  - international journal of automotive technology.  12(2):225-232. 

akeel, n.a., sajuri, z., ariffin, a.k..  (2011).  analysis of rolling contact fatigue damage initiation at the wheel-rail interface.  - australian journal of basic and applied sciences.  5(12):937-945. 

kadhim n.a., abdullah s., ariffin a.k..  (2011).  effect of the fatigue data editing technique associated with finite element analysis on the component fatigue design period.  - materials and design.  32(2):1020-1030. 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k., mohammad, m..  (2011).  evaluating charpy impact signals using power spectrum densities: a finite element method approach.  - international journal of mechanical and materials engineering.  6(1):92-101. 

romlay, f.r.m., ouyang, h., ariffin, a.k., mohamed, n.a.n..  (2010).  modeling of fatigue crack propagation using dual boundary element method and gaussian monte carlo method.  - engineering analysis with boundary elements.  34(3):297-305. 

r. hamid, a. s. m. z. hasan, and a. k. ariffin.  (2010).  sensivity of model parameter on dynamic behavior simulation of hpc.  - journal of materials in civil engineering.  22(12):1244-1251. 

r. hamid, a. s. m. z. hasan, and a. k. ariffin.  (2010).  sensitivity of model parameter on dynamic behavior simulation of hpc.  - journal of materials in civil engineering.  22(12):1244-1251. 

s. abdullah, e. adril, a. muchtar and a.k. ariffin.  (2010).  friction reduction in compressed natural gas direct injection engine using piston rings with diffusion chromium coating.  - journal of applied sciences.  10(6):462-470. 

a.e.ismal, a.k.ariffin, s.abdullah dan m.j.ghazali.  (2010).  stress intensity factors for surface cracks in round bars under combined bending and torsion loadings.  - international review of mechanical engineering (ireme).  4(7):827-832. 

s.m. tahir, a.k. ariffin, m.s. anuar.  (2010).  finite element modelling of crack propagation in metal powder compaction using mohr-coulomb and elliptical cap yield criteria.  - powder technology.  202:162-170. 

s.m. beden, s. abdullah, a.k. ariffin, n.a. al-asady.  (2010).  fatigue crack growth simulation of aluminium alloy under spectrum loadings.  - materials and design.  31(7):3449-3456. 

abdullah s., beden s.m., ariffin a.k., al-asady n.a..  (2009).  fatigue crack growth modelling of aluminium alloy under constant and variable amplitude loadings.  - sdhm structural durability and health monitoring.  5(2):109-131. 

n. a. al-asady, s. abdullah, a. k. ariffin, s. m. bedenand m. m. rahman.  (2009).  fea based durability using strain-life models for different medium carbon steel as fabrication materials for an automotive component.  - international journal of mechanical and materials engineering (ijmme).  4(2):141-146. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, ahmad kamal ariffin.  (2009).  spectral analysis methods for vehicle interior vibro-acoustic identification.  - mechanicsl systems and signal processing (mssp).  23(2):489-500. 

miloud souiyah, a. muchtar, abdulnaser alshoaibi and a.k. ariffin.  (2009).  finite element analysis of the crack propagation for solid materials.  - american journal of applied sciences.  6(7):1396-1402. 

m.m. rahman, a.k. ariffin, m.r.m. rejab, k. kadirgama and m.m. noor.  (2009).  multiaxial fatigue behavior of cylinder head for a free piston linear engine.  - journal of applied sciences.  9(15):2725-2734. 

m.m. rahman, a.k. ariffin, s.s.m. nor.  (2009).  development of a finite element model of metal powder compaction process at elevated temperature.  - applied mathematical modelling.  33(11):4031-4048. 

mohammad hosseini fouladi, mohd. jailani mohd. nor, ahmad kamal ariffin, shahrir abdullah.  (2009).  inverse combustion force estimation based on response measurements outside the combustion chamber and signal processing.  - mechanical systems and signal processing.  23(8):2519-2537. 

al-asady, n.a., abdullah, s., ariffin, a.k., beden, s.m., rahman, m.m..  (2009).  comparison between experimental road data and finite element analysis data for the automotive lower suspension arm.  - european journal of scientific research.  29(4):557-571. 

beden, s.m., abdullah, s., ariffin, a.k..  (2009).  review of fatigue crack propagation models for metallic components.  - european journal of scientific research.  28(3):364-397. 

m.m. rahman, a.k. ariffin, s. abdullah, m.m. noor and rosli a.b.  (2009).  durability assessment of cylinder block for two stroke free piston linear engine using random loading.  - american journal of applied sciences.  6(4):726-735. 

m.m. rahman, a.k. ariffin, s. abdullah, m.m. noor, rosli a. bakar and m. a. maleque.  (2009).  assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach.  - american journal of applied sciences.  6(4):715-725. 

abdulnaser m. alshoaibi, a.k. ariffin and m.n. almaghribi.  (2009).  development of efficient finite element software of crack propagation simulation using adaptive mesh strategy.  - american journal of applied sciences.  6(4):661-666. 

adril e., abdullah s., ariffin a.k., muchtar a., omar k..  (2009).  comparative study of characteristic of lubricant oils in gasoline and compressed natural gas engines.  - european journal of scientific research.  30(2):282-293. 

s. abdullah, m. f. abdullah, a. k. ariffin, a. jalar.  (2009).  effect of leadframe oxidation on the reliability of a quad flat no-lead package.  - journal of electronic packaging (transaction of the asme).  131(3):0310021-0310027. 

s. m. beden, s. abdullah and a. k. ariffin.  (2009).  modeling of fatigue crack growth under constant and variable amplitude loading.  - international journal of mechanical and materials engineering.  4(2):131-135. 

a. k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2008).  probabilistic analysis of cracked structures with uncertainty parameters.  - advanced materials research.  33-37(1):223-228. 

m.j. ghazali, w.m. rainforth, s. abdullah, a.k.a. ihsan & m. hassan.  (2008).  subsurface deformation of worn al-cu and al-mg alloys.  - advanced materials research.  33-37:483-488. 

akramin m.r.m., ariffin a.k., alshoaibi a., hadi m.s.a., huzni s., mohamed n..  (2008).  probabilistic finite element for fracture mechanics.  - transactions hong kong institution of engineers.  15(2):1-8. 

rahman, m.m., arrifin, a.k., nor, m.j.m., abdullah, s..  (2008).  fatigue analysis of spot-welded joint for automative structures.  - sdhm structural durability and health monitoring.  4(3):173-180. 

m. m. rahman, a. k. ariffin, n. jamaludin, s. abdullah & m. m. nor.  (2008).  finite element based fatigue life prediction of a new free piston engine mounting.  - journal of applied sciences.  8(9):1612-1621. 

alshoaibi a.m., ariffin a.k..  (2008).  fatigue life and crack path prediction in 2d structural components using an adaptive finite element strategy.  - international journal of mechanical and materials engineering.  3(1):97-104. 

alshoaibi a.m., hadi m.s.a., ariffin a.k..  (2008).  finite element simulation of fatigue life estimation and crack path prediction of two-dimensional structures components.  - transactions hong kong institution of engineers.  15(1):1-6. 

miloud souiyah, abdulnaser alshoaibi, a. muchtar, a.k. ariffin.  (2008).  finite element model for linear-elastic mixed mode loading using adaptive mesh strategy.  - journal of zhejiang university science a.  9(1):32-37. 

s. abdullah, n. a. al-asady, a. k. ariffin, m. m. rahman.  (2008).  a review on finite element analysis approaches in durability assessment of automotive components.  - journal of applied sciences.  8(12): 2192-2201. 

m. m. rahman, a. k. ariffin, n. jamaludin, c. h. c. haron, rosli a. bakar.  (2008).  fatigue life prediction of two-stroke free piston engine mounting using frequency response approach.  - european journal of scientific research.  22(4):480-493. 

s. abdullah, s. m. beden, a. k. ariffin, m. m. rahman.  (2008).  fatigue life assessment for metallic structure: a case study of shell structure under variable amplitude loading.  - journal of applied sciences.  8(9):1622-1631. 

shahrum abdullah, mohamad faizal abdullah and ahmad kamal ariffin.  (2008).  the effect of leadframe oxidation of a quad flat no-lead semiconductor package under cyclic loading.  - journal of applied sciences.  8(9):1676-1683. 

akramin m.r.m., alshoaibi a.m., hadi m.s.a., ariffin a.k., mohamed n.a.n..  (2008).  probabilistic assessment for cracked structures analysis.  - international journal of mechanical and materials engineering.  3(1):1-6. 

nor s.s.m., rahman m.m., tarlochan f., shahida b., ariffin a.k..  (2008).  the effect of lubrication in reducing net friction in warm powder compaction process.  - journal of materials processing technology.  207(1-3):118-124. 

rahman m.m., ariffin a.k., abdullah s., rosli a.b..  (2007).  effect of nitriding treatment on fatigue life for free piston linear engine component using frequency response method: a finite element approach.  - sdhm structural durability and health monitoring.  3(4):197-209. 

rahman m.m., ariffin a.k., mohamed n.a.k..  (2007).  investigate the influences of shot peening on the fatigue life of vibrating cylinder block for a new free piston linear engine.  - international journal of mechanical and materials engineering.  2(1):19-28. 

m. m. rahman; a. k. ariffin and s. abdullah.  (2007).  finite element based vibration fatigue analysis of a new two-stroke linear generator engine component.  - international journal of mechanical and materials engineering.  2(1):63-74. 

s. abdullah and a. k. ariffin.  (2006).  accelerated fatigue tests of bs 080a42 steel using the wbe mission loadings.  - key engineering materials.  326-328:1023-1026. 

m. a. hannan, a. hussain, s. a. samad, a. mohamed, d. a. wahab and a. k. ariffin.  (2006).  development of occupant classification and position detection for intelligent safety system.  - international journal of automative technology.  7(7):827-832.