h.n. abu bakar, j.a. ghani, c.h. che haron, m.j. ghazali , m.s. kasim, s. al-zubaidi, n. jouini.  (2023).  wear mechanisms of solid carbide cutting tools in dry and cryogenic machining of aisi h13 steel with varying cutting-edge radius.  - wear.  1-8. 

haniff a rahman, jaharah a ghani, wan mohd faizal wan mahmood, mohammad rasidi rasani and nabil jouini.  (2023).  hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using cfd.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1632-1646. 

n.h.a. halim, c.h.c. haron, j.a. ghani, m.f. azhar, z. zulkifli.  (2023).  the correlation of surface roughness and tool edge condition under sustainable cryogenic machining.  - journal of mechanical engineering and sciences.  9315-9323. 

jaharah a ghani, yan guoliang, nurul nadia nor hamran, pin han yap, haniff abdul rahman, wan mohd faizal wan mahmood, rizauddin ramli, jing ni, u.mohammed iqbal.  (2023).  simulation study of the parameters that affecting the droplets size produced in a minimum quantity lubrication (mql) system using a computational fluid dynamic (cfd).  - jurnal tribologi.  116-126. 

afifah z. juri, firdaus azmi, animesh k. basak, jaharah a. ghani, mohd shahir kasim, rodianah alias.  (2023).  tribological and corrosion behaviour of medical grade 316lvm steel by low temperature hybrid gaseous nitriding and carburizing.  - tribology international.  1-11. 

muhammad rizal, jaharah a. ghani, husni usman, muhammad dirhamsyah, amir zaki mubarak.  (2023).  design and optimization of a cross-beam force transducer for a stationary dynamometer for measuring milling cutting force..  - journal of machine engineering.  41-65. 

nabil jouini, mohd shahfizal mohd ruslan, jaharah a. ghani and che hassan che haron.  (2023).  sustainable high-speed milling of magnesium alloy az91d in dry and cryogenic conditions.  - suatainability.  1-14. 

vignesh s; mohammed iqbal u; jaharah a. ghani.  (2023).  a study on the effects of hybridized metal oxide and carbonaceous nano-cutting fluids in the end milling of aa6082 aluminum alloy.  - lubricants.  1-15. 

mohd shahir kasim, norsilawati ngah, saiful bahri mohamed, zammeri abdul rahman, che hassan che haron, siti nurul akmal yusof, jaharah a ghani, amirulihsan mohamad.  (2023).  machining surface quality evaluation of inconel 718: a comparative study of various coolant and lubrication strategies in milling process.  - jurnal tribologi.  17-35. 

ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2023).  the influence of cutting parameter under sustainable machining approaches on surface roughness of aisi 4340.  - journal of mechanical engineering.  63-80. 

salah al-zubaidi, jaharah a. ghani, che hassan che haron, adnan naji jameel al-tamimi, m. n. mohammed, alessandro ruggiero, samaher m. sarhan, oday i. abdullah, and mohd shukor salleh.  (2023).  investigation of the performance of integrated intelligent models to predict the roughness of ti6al4v end-milled surface with uncoated cutting tool.  - journal of the mechanical behavior of materials.  1-23. 

m.s. kasim, m.s.a. hafiz, j.a. ghani, r. izamshah, m.n.a. rahman,w.n.f. mohamad, s.b. mohamed.  (2023).  the effect of pulsating lubrication method on rake face cutting tool during end milling of inconel 718.  - result in engineering.  1-5. 

shalina sheik muhamad, jaharah a. ghani 1, che hassan che haron, and hafizal yazid.  (2022).  wear mechanism of multilayer coated carbide cutting tool in the milling process of aisi 4340 under cryogenic environment.  - materials.  1-12. 

ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  potential of bio-metal cutting fluid from treated recycled cooking oil for metal cutting fluid application.  - journal of mechanical engineering.  83-97. 

a. k. m. aminul islam, zahira yaakob, jaharah a. ghani, azza alareefy, nisreen m. abdulsalam, najla a. khateeb, nahla zidan, mahmoud a. abdelazi, ayman el sabagh*, mohamed i. sakran, awatif omran, ahmad el askary, mohamed el-sharnouby et al..  (2022).  genotype and age of industrial plant jatropha curcas l. affect physico-chemical properties of seed oil.  - frontiers in energy research.  1-9. 

muhammad rizal, jaharah a. ghani and amir zaki mubarak.  (2022).  design and development of a tri-axial turning dynamometer utilizing cross-beam type force transducer for fine-turning cutting force measurement.  - sensors.  1-15. 

jaharah a. ghani, yap pin han, wan mohd. faizal wan mahmood.  (2022).  study on liquid nano-atomization systems for minimum quantity lubrication - a review.  - the international journal of advanced manufacturing technology.  5637-5649. 

ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  effect of cutting parameters on tool life during end milling of aisi 4340 under mql condition.  - industrial lubrication and tribology.  392-401. 

haniff abdul rahman, muhammad rizal, jaharah a. ghani, muhammad amirul syahfikri mazlan, mohd zaki nuawi1, che hassan che haron, mohd nur alfath suliman, abdul hadi mehamud zelun.  (2022).  semiconductor strain gauges as potential replacement to metal foil for cutting force measurement in machining process.  - jurnal tribologi.  137-147. 

faarih farhan mohd nasir, jaharah a. ghani, mohd shahir kasim, wan fathul hakim w. zamri.  (2022).  characteristics of dimple structure on aluminium silicon alloy fabricated using turning machine.  - industrial lubrication and tribology.  421-430. 

pin han yap, jaharah a. ghani, wan md. faizal wan mahmood.  (2022).  optimisation on the performance of bubble-bursting atomisation for minimum quantity lubrication with vegetable oil using computational fluid dynamics simulation.  - materials.  1-17. 

jaharah a. ghani, faarih farhan mohd nasir, haniff abdul rahman, wan fathul hakim wan zamri, mohd shahir kasim, shalina sheikh muhamad.  (2021).  computational fluid dynamic analysis on tribological performance under hydrodynamic lubrication of dimple textured surface produced using turning process.  - wear.  1-8. 

che hassan che haron, jaharah abdul ghani, muammar faiq azhar, nurul hayati abdul halim, n. badroush.  (2021).  microstructure and microhardness alterations of inconel 718 under cryogenic cutting.  - journal of mechanical engineering.  51-64. 

chan jia yuan, ahmad shahrun hijrie abu bakar, muhamad najib roslan, cheah weng cheng, muhammad nadzmie syafiq mohd rosekhizam, jaharah a. ghani, zaliha wahid.  (2021).  electrochemical machining (ecm) and its recent development.  - jurnal tribologi.  20-31. 

n. a. kasim, m. z. nuawi, j. a. ghani, muhammad rizal, n. a. ngatiman & c. h. c. haron.  (2021).  enhancing clustering algorithm with initial centroids in tool wear region recognition.  - international journal of precision engineering and manufacturing.  843-863. 

ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2021).  green lubrication technique for sustainable machining of aisi 4340 alloy steel.  - jurnal tribologi.  1-19. 

m.s. kasim, n.h.n. husshini, m.s.a. hafiz, w.n.f. mohamad, r. izamshah, j.a ghani, c.h.c haron.  (2021).  particulate matter : monitoring during end milling under different cooling-lubrication strategies.  - journal of applied science and engineering,.  891-900. 

nurul hayati abdul halim, che hassan che haron & jaharah abdul ghani.  (2020).  sustainable machining of hardened inconel 718: a comparative study.  - international journal of precision engineering and manufacturing.  1375-1387. 

husni nazra abu bakar, jaharah a. ghani , che hassan che haron.  (2020).  influence of rounded cutting-edge radius and machining parameters on surface roughness and tool wear in milling aisi h13 steel under dry and cryogenic machining.  - jurnal tribologi.  52-64. 

shalina sheik muhamad, jaharah a. ghani, che hassan che haron, and hafizal yazid.  (2020).  cryogenic milling and formation of nanostructured machined surface of aisi 4340.  - nanotechnology reviews.  1104-1117. 

n.n. nor hamran, j.a. ghani, r. ramli, c.h. che haron.  (2020).  a review on recent development of minimum quantity lubrication for sustainable machining.  - journal of cleaner production.  1-18. 

muhammad asyraf mohd azmi, wan mohd faizal wan mahmood, jaharah a. ghani, mohammad rasidi mohammad rasani.  (2020).  a review of surface texturing in internal combustion engine piston assembly.  - international journal of integrated engineering.  146-163. 

shalina sheikh muhamad, jaharah a. ghani, che hassan che haron, hafizal yazid.  (2020).  wear mechanism of a coated carbide tool in cryogenic machining of aisi 4340.  - industrial lubrication and tribology.  509-514. 

r samin, n azman, mz nuawi, sm haris, ja ghani.  (2020).  optimization of the surface roughness for titanium ti6a14v in turning process using taguchi method.  - test engineering and management.  1072-1078. 

nor aznan mohd nor, b.t.h.t baharudin, j. a. ghani, z. leman and m.k.a. ariffin.  (2020).  effect of chip load and spindle speed on cutting force of hastelloy x.  - journal of mechanical engineering and sciences.  6497-6503. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood, mohammad rasidi mohammad rasani,.  (2019).  computational fluid dynamic study on the tribological performance of dimple-textured surface fabricated using the turning process.  - industrial lubrication and tribology.  594-602. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  the study on the properties of ticn coatings processed by cathodic arc physical vapour deposition.  - tribology - materials, surfaces & interfaces.  58-66. 

n.h.a. halim, c.h.c. haron, j.a. ghani, m.f. azhar.  (2019).  tool wear and chip morphology in high-speed milling of hardened inconel 718 under dry and cryogenic co2 conditions.  - wear.  1683-1690. 

m.s. kasim, m.s.a. hafiz, j.a. ghani, c.h.c. haron, r. izamshah, s.a. sundi, s.b. mohamed, i.s. othman.  (2019).  investigation of surface topology in ball nose end milling process of inconel 718.  - wear.  1318-1326. 

j.a. ghani, m.n.a.m. dali, h.a. rahman, c.h.c. haron, w.m.f. wan mahmood,m.r.m. rasani, m.z. nuawi.  (2019).  analysis of dimple structure fabricated using turning process and subsequent reduction in friction.  - wear.  1280-1285. 

natasha a. raof, jaharah a. ghani, che hassan che haron.  (2019).  machining-induced grain refinement of aisi 4340 alloy steel under dry and cryogenic conditions.  - journal of materials research and technology.  4347-4353. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  surface characterisation of ticxn1x coatings processed by cathodic arc physical vapour deposition: xps and xrd analysis.  - surface and interface analysis.  611-617. 

n. a. kasim, m. z. nuawi, j. a. ghani, m. rizal, m. a. f. ahmad and c. h. che haron.  (2019).  cutting tool wear progression index via signal element variance.  - journal of mechanical engineering and sciences.  4596-4612. 

m. rizal, j.a. ghani, husni, husaini.  (2018).  design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process.  - journal of mechanical engineering and sciences.  . 

z. karim, izatul hamimi abdul razak, a.y.m. said, m.z. nuawi, j.a. ghani,.  (2018).  strain gauge-based online tool wear monitoring using i-kaz multilevel signal.  - journal of advanced research in dynamical and control systems.  . 

husni nazra abu bakar, jaharah a. ghani, che hassan che haron.  (2018).  numerical investigation on effect of rounded cutting edge radius and machining parameters in end milling of aisi h13 tool steel.  - international journal of engineering & technology.  . 

jaharah a. ghani, sharudin hassan, mohd nor azam bin mohd dali, che hassan che haron.  (2018).  fabrication of a dimple structure using a machining process on a metallic surface.  - world review of science, technology and sustainable development.  . 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood.  (2018).  a brief review on friction reduction via dimple structure for piston engine.  - world review of science, technology and sustainable development.  . 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi & che hassan che haron.  (2018).  an embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling.  - the international journal of advanced manufacturing technology.  811-823. 

m. a. f. ahmad, m. z. nuawi, j. a. ghani, s. abdullah dan a. n. kasim.  (2018).  tool wear monitoring using macro fibre composite as a vibration sensor via i-kaztm statistical signal analysis.  - arpn journal of engineering and applied sciences.  . 

mohd shahfizal mohd ruslan, haniff abdul rahman, jaharah abdul ghani, che hassan che haron, mohd shahir kassim, kamal othman.  (2018).  determination of optimum machining condition for surface roughness using historical data.  - international journal of engineering & technology.  . 

m.s. asiyah, m.a. sulaiman, r. shahmi, r. zuraimi, e. mohamad, c.h. che haron, j.a. ghani.  (2018).  performance of cvd coated carbide tool by optimizing machining parameters during turning titanium alloy ti-6al-4v eli in flooded condition.  - journal of advanced manufacturing technology.  . 

nurul hayati abdul halim, che hassan che haron, jaharah a. ghani and muammar faiq azhar.  (2018).  machining-induced microstructure of inconel 718 in cryogenic environment.  - progress in industrial ecology.  . 

shalina sheik muhamad, jaharah a. ghani and che hassan che haron.  (2018).  a review on future implementation of cryogenic machining in manufacturing industry.  - progress in industrial ecology.  . 

n. badroush, c.h. che haron, j. a. ghani, m.f. azhar, nurul hayati abdul halim.  (2018).  overview and case study of cryogenic cooling in machining of nickel based alloy.  - journal of mechanical engineering.  . 

h. azmi, c.h. che haron, j.a. ghani & m. suhaily.  (2018).  pembandingan kesan faktor pelekangan (fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar.  - sains malaysiana.  . 

n. badroush, c. h. che haron, j. a. ghani, m. f. azhar, nurul hayati abdul halim.  (2018).  performance of coated carbide tools when turning inconel alloy 718 under cryogenic condition using rsm.  - journal of mechanical engineering.  . 

aminul islam, a.k.m., yaakob, z., anuar, n., primandari, s.r.p., ghani, j.a..  (2017).  properties of jatropha hybrid seed oil and its suitability as biodiesel feedstock.  - energy sources, part a: recovery, utilization and environmental effects.  1707-1717. 

azmi harun, sia ting ting, che hassan che haron, jaharah a. ghani, suhaily mokhtar.  (2017).  a study on parameter optimization of the delamination factor (fd) in milling kenaf fiber reinforced plastics composite materials using doe method.  - journal of mechanical engineering.  . 

suhaily mokhtar, che hassan che haron, jaharah a. ghani, azmi harun.  (2017).  evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates.  - journal of mechanical engineering.  . 

z. karim, a. y. m. said, m. z. nuawi, j. a. ghani and a. r. bahari.  (2017).  value prediction of materials mechanical properties using i-kaz analysis method during impact test: experimental study.  - international journal of applied engineering research.  14608-14619. 

sharudin bin hassan, jaharah a. ghani, che hasan che haron, mohd nor azam bin md dali.  (2017).  development of dynamic assisted tooling using triz approach for dimple structure fabrication in milling process.  - journal of mechanical engineering.  23-32. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad & jaharah a. ghani.  (2017).  kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik.  - sains malaysiana.  1979-1986. 

mohd nor azam mohd dali, jaharah a. ghani, che hassan che haron, sharudin hassan.  (2017).  fabrication of dimple structured surface of a390 al-si alloy using turning process.  - industrial lubrication and tribology.  348-354. 

m. rizal , j.a.ghani , m.z.nuawi, c.h.c.haron.  (2017).  cutting tool wear classification and detection using multi-sensor signals and mahalanobis-taguchi system.  - wear.  1759-1765. 

a.h.musfirah, j.a.ghani , c.h.che haron.  (2017).  tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed.  - wear.  125-133. 

mohd shahfizal ruslan, kamal othman, jaharah a.ghani, mohd shahir kassim, che hassan che haron.  (2016).  surface roughness of magnesium alloy az91d in high speed milling.  - jurnal teknologi.  115-119. 

m. s. said, j. a.ghani, a. syed, m. f. azlan, z. a. latiff and b. zubir.  (2016).  tool wears on drill metal matrix composites (mmc) al-si/10%aln material.  - arpn journal of engineering and applied sciences.  7677-7682. 

jaharah a. ghani and che hassan che haron, mohd shahir kasim and mohd amri sulaiman, siti haryani tomadi.  (2016).  wear mechanism of coated and uncoated carbide cutting tool in machining process.  - journal of material research.  1873-1879. 

karim z., nuawi m.z., ghani j.a., said a.y.m..  (2016).  preliminary study on machining condition monitoring system using 3-channel force sensor analyzed by i-kaz multilevel method.  - international journal on advanced science, engineering and information technology.  508-511. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1
x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

nor khairusshima muhamad khairussaleh, che hassan che haron and jaharah a. ghani.  (2016).  study on wear mechanism of solid carbide cutting tool in milling cfrp.  - journal of material research.  1883-1889. 

m. s. kasim, c. h. che haron, j. a. ghani, m. a. hadi, r. izamshah, t. j. s. anand & s. b. mohamed.  (2016).  cost evaluation on performance of a pvd coated cutting tool during end-milling of inconel 718 under mql conditions.  - transactions of the imf.  175-181. 

zaliha wahid; sallehuddin mohamed haris; nizaroyani saibani; jaharah a. ghani; rozli zulkifli; mohd radzi abu mansor.  (2016).  examination achievement of engineering students from ukm and ude: a comparison.  - pertanika journal of social sciences and humanities.  229-238. 

mohd nor azam bin mohd dali, jaharah a. ghani, che hassan che haron, sharudin bin hassan.  (2016).  fem simulation for determining suitable parameters for dimple structure fabrication in turning process.  - international journal of materials & product technology.  218-230. 

sukadarin e.h., deros b.m., ghani j.a., mohd nawi n.s., ismail a.r..  (2016).  postural assessment in pen-and-paper-based observational methods and their associated health effects: a review.  - international journal of occupational safety and ergonomics.  389-398. 

haris jamaluddin, jaharah a. ghani, baba md deros, mohd nizam ab rahman and rizauddin ramli.  (2016).  quality improvement using taguchi method in shot blasting process.  - journal of mechanical engineering and sciences.  2201-2214. 

jaharah a. ghani, a.r. natasha, c.h. che hassan and j. syarif.  (2016).  triz approach for machining process innovation in cryogenic environment.  - international journal of materials & product technology.  286-297. 

deros bm, daruis ddi, ghani ja, salleh c, wazir rm, yasim mk, hassan nh, wazir mfm, saidin ms, noridan wnaw, saidi ms.  (2016).  a case study on manual handling at an electronic component manufacturing company.  - malaysian journal of public health medicine.  1-6. 

ezrin hani sukadarin, baba md deros, jaharah a. ghani, ahmad rasdan ismail, nur syazwani mohd nawi, norhidayah abdull.  (2016).  validity test for simple ergonomics risk assessment (sera) method.  - malaysian journal of public health medicine.  134-143. 

musfirah abdul hadi, jaharah a. ghani, che hassan che haron and mohd. shahir kasim.  (2016).  effect of cutting speed on the carbide cutting tool in milling inconel 718 alloy.  - journal of materials research.  1885-1892. 

a.r. natasha, j.a. ghani, c.h. che haron, j. syarif, a.h. musfirah.  (2016).  temperature at the tool-chip interface in cryogenic and dry turning of aisi 4340 using carbide tool.  - international journal of simulation modelling.  1-12. 

h. azmi, c. h. c haron, j. a. ghani, m. suhaily, a. b. sanuddin and j. h. song.  (2016).  study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology.  - arpn journal of engineering and applied sciences.  4761-4766. 

n.h.m. tahir, r. muhammad, j. a. ghani, m. z. nuawi, c. h. c. haron.  (2016).  monitoring the flank wear using piezoelectric of rotating tool of main cutting force in end milling.  - jurnal teknologi.  45-51. 

norashikin rahman, baba md deros*, mohd nizam ab rahman, jaharah a. ghani, chairul saleh.  (2015).  a study benchmarking understanding, knowledge and implementation barriers in malaysian oil palm industry.  - jurnal teknologi (sciences & engineering).  65-70. 

p.c. siow, j.a. ghani, r.j. talib, m.j. ghazali, c.h. che haron.  (2015).  characterization using xps and xrd of ti(c,n) coating properties for cutting tool applications.  - interceram: international ceramic review.  287-290. 

a.n. siregar, j.a. ghani, c.h.c. haron, m. rizal, z. yaakob, s.k. kamarudin.  (2015).  comparison of oil press for jatropha oil a- review.  - research in agricultural engineering.  1-13. 

w. m. f. w. mahmood, m. a. ariffin, z. harun, n. a. i. md. ishak, j. a. ghani, m. n. ab. rahman.  (2015).  characterisation and potential use of biochar from gasified oil palm wastes.  - journal of engineering science and technology.  45-54. 

a. h. musfirah, j. a. ghani, c. h. che haron, m. s. kasim.  (2015).  effect of cutting parameters on cutting zone in cryogenic high speed milling of inconel 718 alloy.  - jurnal teknologi.  1-7. 

mohd nor azam bin mohd dali, jaharah a. ghani and che hassan che haron.  (2015).  triz approach for analyzing method of dimple structure fabrication.  - arpn journal of engineering and applied sciences.  6257-6262. 

karim z., nuawi m.z., ghani j.a., ghazali m.j., abdullah s., mansor n.i.i..  (2015).  sliding wear evaluation of aluminum alloy (7075-t6) on hardened steel (aisi4340) via non-contact technique by i-kaz™ multi-level analysis.  - wear.  99-104. 

yanda, h.; ghani, j. a.; rizal, m. & che haron, c. h..  (2015).  performance of uncoated and coated carbide tools in turning fcd700 using fem simulation.  - international journal of simulation modelling.  416-425. 

a.k.m. aminul islam, nurina anuar, zahira yaakob & jaharah a. ghani.  (2015).  germination behaviour of 6 × 6 diallel hybrids of an energy crop jatropha curcas l.  - sains malaysiana.  1275-1281. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2015).  development and testing of an integrated rotating dynamometer on tool holder for milling process.  - mechanical systems and signal processing.  559-576. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

a.k.m. aminul islam, nurina anuar, zahira yaakob, jaharah a. ghani & mohamad osman.  (2015).  diallel analysis for seed yield and related traits in an energy crop jatropha curcas.  - sains malaysiana.  979-986. 

haris jamaluddin, jaharah a. ghani, mohd nizam ab. rahman, baba md. deros.  (2014).  development of training kit for learning taguchi method and design of experiments.  - jurnal teknologi.  68(4): 19-25. 

m. s. said, j. a. ghani, r. othman, m. a. selamat, n. n. wand, che hassan, c. h..  (2014).  surface roughness and chip formation of alsi/ain metal matrix composite by end milling machining using the taguchi method.  - jurnal teknologi.  68(4): 13-17. 

s. h. tomadi, j. a. ghani, c. h. che haron, m. s. kasim, a. r. daud.  (2014).  optimization of cutting parameters of multiple performance characteristics in end milling of alsi/ain mmctaguchi method and grey relational analysis.  - jurnal teknologi.  68(4):33-40. 

baba md deros, ahmad rasdan ismail, jaharah a. ghani and mohd yusri mohd yusof.  (2014).  conformity to occupational safety and health regulations in malaysian small and medium enterprises.  - american journal of applied sciences.  11(3): 499-504. 

m.a. sulaiman, c.h. che haron, j.a. ghani & m.s. kasim.  (2014).  effect of high-speed parameters on uncoated carbide tool in finish turning titanium ti-6al-4v eli.  - sains malaysiana.  43(1): 111-116. 

abdullah ismail, jaharah a. ghani, mohd nizam ab rahman, baba md deros, and che hassan che haron.  (2014).  application of lean six sigma tools for cycle time reduction in manufacturing: case study in biopharmaceutical industry.  - arabian journal for science and engineering.  1449-1463. 

ezrin hani sukadarin, baba md deros, jaharah a. ghani, ahmad rasdan ismai.  (2014).  a review of work related musculoskeletal problems in agricultural industry.  - australian journal of basic & applied sciences.  56-59. 

mohd nizam ab. rahman, noor suhana mohd zubir, raden achmad chairdino leuveano, jaharah a. ghani and wan mohd faizal wan mahmood.  (2014).  reliability study of solder paste alloy for the improvement of solder joint at surface mount fine-pitch components.  - materials.  7706-7721. 

jaharah a. ghani, muhammad rizal, che hassan che haron.  (2014).  performance of green machining: a comparative study of turning ductile cast iron fcd700.  - journal of cleaner production.  289-292. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2014).  a wireless system and embedded sensors on spindle rotating tool for condition monitoring.  - advanced science letters.  1829-1832. 

ms kasim, ch che haron, ja ghani, ma azam, rizamshah, ma md ali and ms a aziz.  (2014).  the influence of cutting parameter on heat generation in high-speed milling inconel 718 under mql condition.  - journal of scientific & industrial research.  73:62-65. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  binder removal via a two-stage debinding process for ceramic injection molding parts.  - ceramics international.  40(2014):2819-2824. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  fabrication of zirconia-toughened alumina parts by powder injection molding process: optimized processing parameters.  - ceramics international.  40: 273-280. 

natasha a.r., othman h., ghani j.a., che haron c.h., syarif j..  (2014).  chip formation and coefficient of friction in turning s45c medium carbon steel.  - international journal of mechanical and mechatronics engineering.  89 - 92. 

muhammad rizal,b, jaharah a. ghani, mohd zaki nuawi, mohamad amir shafiq mohd tahir, che hassan che haron.  (2014).  a comparative study of i-kaz based signal analysis techniques: application to detect tool wear during turning process.  - jurnal teknologi.  66(3):99-105. 

ali nurrakhmad siregar, wan mohd faizal wan mahmod, jaharah a. ghani, che hassan che haron, muhammad rizal.  (2014).  design and analysis of single screw extruder for jatropha seeds using finite element method.  - research journal of applied sciences, engineering and technology.  7(10):2098-2105. 

zaliha wahid, norhamidi muhamad, shahrir abdullah, jaharah a. ghani.  (2014).  the influence of temperature dependant parameters in plastic 0.0nd metal injection molding using taguchi method.  - jurnal teknologi.  51-56. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi and che hassan che haron.  (2014).  a review of sensor system and application in milling process for tool condition monitoring.  - research journal of applied sciences, engineering and technology.  7(10): 2083-2097. 

m. a. hadi, j. a. ghani, c. h. che haron, m. s. kasim.  (2014).  investigation on wear behavior and chip formation during up-milling and down-milling operations for inconel 718.  - jurnal teknologi (sciences and engineering).  66(3): 15-21. 

salah al-zubaidi, jaharah abdul ghani, che hassan che haron.  (2014).  prediction of tool life when end milling of ti6al4v alloy using hybrid learning system.  - arabian journal for science and engineering.  39(6):5095-5111. 

tasirin, s.m., puspasari, i., xing, l.j., yaakob, z., ghani, j.a.g.  (2013).  energy optimization of fluidized bed drying of orange peel using taguchi method.  - world applied sciences journal.  26 (12):1602-1609. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

s.h. tomadi, j.a. ghani, c.h. che haron, m.s. kasim, m.h. abd kadir and a.r. daud.  (2013).  surface integrity of newly developed of alsi/aln metal matrix composite during end milling under dry cutting conditions.  - journal of applied sciences, engineering and technology.  6(6):1129-1134. 

m.k. nor khairusshima, c.h. che hassan, a.g. jaharah, a.k.m. amin, a.n. md idriss.  (2013).  effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic.  - wear.  302:1113-1123. 

z. karim, m.z .nuawi, a.y. md. said, j.a. ghani & s. abdullah.  (2013).  integrated kurtosis-based algorithm for z-notch filter (i-kaztm) multilevel coefficients responses toward the simultaneous changes in amplitude and frequency of signals.  - journal of applied sciences.  13(2):232-241. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2013).  online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system.  - applied soft computing.  13(4):1960-1968. 

z. karim, m.z. nuawi, j.a. ghani, e.a. azrulhisham and s. abdullah.  (2013).  development of machining condition monitoring system using piezoelectric sensor analyzed by i-kaz multilevel method.  - world applied sciences journal.  21(2):264-268. 

z. karim, izatul h.a.r., s.a.s. azuan, mastura s., a.y.m. said, a.r. bahari, j.a. ghani, m.z. nuawi.  (2013).  material mechanical property correlation study using vibration signal analysis.  - australian journal of basic and applied sciences.  7(4):94-99. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

m.j. ghazali, n.i.i. mansor, m.z. nuawi, j.a. ghani.  (2013).  facile wear failure monitoring of commercial bearing alloys using i-kaz method.  - engineering failure analysis.  35:545-553. 

jaharah a. ghani, haris jamaluddin, mohd nizam ab. rahman and baba md. deros.  (2013).  philosophy of taguchi approach and method in design of experiment.  - asian journal of scientific research.  6(1):27-37. 

jaharah a. ghani, che hassan che haron, siti hartini hamdan, ahmad yasir md said, siti haryani tomadi.  (2013).  failure mode analysis of carbide cutting tools used for machining titanium alloy.  - ceramics international.  39(4):4449-4456. 

salah al-zubaidi, jaharah a. ghani, che hassan che haron.  (2013).  optimization of cutting conditions for end milling of ti6al4v alloy by using a gravitational search algorithm (gsa).  - meccanica.  48(7):1701-1715. 

s.k. kamarudin,n.s. shamsul, j.a. ghani, s.k. chia , h.s. liew , a.s. samsudin.  (2013).  production of methanol from biomass waste via pyrolysis.  - bioresource technology.  129:463-468. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  pencirian keseragaman campuran dan sifat reologi serbuk alumina-zirkonia untuk pengacuan suntikan seramik.  - sains malaysiana.  42(9):1311-1317. 

m.s. kasim, c.h. che haron, j.a. ghani, m.a. sulaiman, m.z.a. yazid.  (2013).  wear mechanism and notch wear location prediction model in ball nose end milling of inconel 718.  - wear.  302:1171-1179. 

m.s. kasim, c.h. che haron, j.a. ghani, a.i. gusri, m.z.a. yazid & m.a. sulaiman.  (2013).  tool life of tialn pvd coated carbide tool in high-speed end milling of untreated inconel 718 under minimum quantity lubrication condition.  - sains malaysiana.  42(12):1721-1726. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2013).  prediction of surface roughness when end milling ti6al4v alloy using adaptive neurofuzzy inference system.  - modelling and simulation in engineering.  2013:Article ID 932094. 

n. khairusshima, m. k., che hassan, c. h, jaharah, a. g, amin, a. k. m..  (2012).  the effect of milling parameters on laminated carbon fibre reinforced plastic (cfrp).  - jurnal teknologi.  59(2):203-207. 

m.a. sulaiman, c.h. che haron, j.a. ghani, m.s. kasim.  (2012).  the study of wear process on uncoated carbide cutting tool in machining titanium alloy.  - journal of applied sciences research.  8(9):4821-4827. 

jaharah a. ghani, yeong shoot kian, stephanie tan chia ven, zahira yaakob, and che hassan che haron.  (2012).  performance of biodegradable palm oil coolant in machining process.  - journal of biobased materials and bioenergy.  6:1-4. 

afifi zainal, zahira yaakob, mohd sobri takriff, renganathan rajkumar, and jaharah abdul ghani.  (2012).  phycoremediation in anaerobically digested palm oil mill effluent using cyanobacterium, spirulina platensis.  - journal of biobased materials and bioenergy.  6:1-6. 

siow ping chuan, jaharah a. ghani, siti haryani tomadi and che hassan che hassan.  (2012).  analysis of ti-base hard coating performance in machining process: a review.  - journal of applied sciences.  12(8):1882-1890. 

jaharah a. ghani, poh siang jye, che hassan che haron, muhammad rizal, mohd zaki nuawi.  (2012).  determination of sensor location for cutting tool deflection using finite element method simulation.  - proceedings of the institution of mechanical engineers, part c: journal of mechanical engineering science.  226(9):2373-2377. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2012).  application of artificial neural networks in prediction tool life of pvd coated carbide when end milling of ti6al4v alloy.  - international journal of mechanics.  6(3):179-186. 

a.r. natasha, j.a. ghani, c.h.c. haron, j. syarif.  (2012).  the effect of cryogenic application on surface integrity in manufacturing process: a review.  - journal of applied sciences research.  8(9):4880-4890. 

j. a. ghani, m. rizal, m. zaki nuawi, c. h. che haron.  (2012).  development of an adequate online tool wear monitoring system in turning process using low cost sensor.  - advanced science letters.  13:702-706. 

wan mohd hirwani wan hussain, mohd nizam abdul rahman, jaharah a. ghani, wan kamal mujani, zinatul ashiqin zainol and noor inayah yaakub.  (2012).  planning production and control: design of experiments (doe) in legal service industry.  - research journal of applied sciences, engineering and technology.  4(12):1684-1689. 

rizauddin ramli, dzuraidah abd wahab, jaharah abd ghani and raime m. zain.  (2012).  a comparison of lifted lead defect inspection system for surface mount technology.  - journal of scientific and industrial research.  71(5):330-333. 

rizauddin ramli, roazam ahmad, jaharah abd ghani.  (2012).  kerf width optimization in wire-cut electrical discharge machine by using taguchi method.  - jurnal teknologi (sciences & engineering).  59:207-211. 

aminah ishak, jaharah a. ghani, che hassan che haron.  (2012).  penentuan faktor yang mempengaruhi daya dan taburan tegasan semasa pemesinan besi tuangan mulur (fcd 500) secara simulasi.  - sains malaysiana.  41(12):1605-1612. 

jaharah a. ghani, poh siang jye, che hassan che haron, muhammad rizal, mohd zaki nuawi.  (2012).  relationship between measurement of cutting force and sensor location in turning process.  - jurnal teknologi.  59:91-94. 

musfirah a.h, jaharah a.g.  (2012).  magnesium and aluminum alloys in automotive industry.  - journal of applied sciences research.  8(9):4865-4875. 

p. c. siow, j.a. ghani, s. c. v. tan.  (2011).  the wear progression of tin coated carbide insert in turning fcd 700 cast iron.  - engineering e-transaction.  6(2):152-157. 

s.h. tomadi, j.a. ghani, che hassan c.h., a.r. daud.  (2011).  effect of machining parameters on the tool wear and surface roughness of al-aln mmc in end milling machining.  - engineering e-transaction.  6(2):159-163. 

j. a. ghani, k. othman, m. n. a. rahman, b. m. deros and c. h. c. haron.  (2011).  machined surface of fcd 700 ductile cast iron in a dry turning environment using carbide tools.  - international journal of mechanical and materials engineering.  6(3):362-366. 

gusri akhyar ibrahim, che hassan che haron, jaharah abdul ghani, ahmad yasir moh. said, and moh. zaid abu yazid.  (2011).  performance of pvd-coated carbide tools when turning inconel 718 in dry machining.  - advances in mechanical engineering.  Article ID 790975:1-7. 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624. 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2011).  modeling and simulation of temperature generated on work piece and chip formation in orthogonal machining.  - international review of mechanical engineering.  5(2):340-348. 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2011).  optimization of integrated kurtosis-based algorithm for z-filter (i-kaz ) tm coefficient using multi level signal decomposition technique.  - world applied sciences journal.  14 (10): 1541-1548. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2011).  application of ann in milling process: a review.  - modelling and simulation in engineering.  art. no. 696275. 

jaharah a. ghani, muhammad rizal, ahmad sayuti, mohd zaki nuawi, rizauddin ramli, baba deros, che hassan che haron.  (2011).  online tool wear monitoring using portable digital assistant (pda).  - international journal of the physical sciences.  6(16):3952-3957. 

z. effendi, r. ramli and j.a. ghani.  (2011).  application of back propagation diagnostic model for fruit maturity classification: case jatropha curcas.  - australian journal of basic and applied sciences.  5(3):134-140. 

h. yanda, j.a. ghani, m.n.a.m. rodzi, k. othman and c.h.c. haron.  (2010).  optimization of material removal rate, surface roughness and tool life on conventional dry turning of fcd700.  - international journal of mechanical and materials engineering (ijmme).  5(2):182-190. 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2010).  effect of rake angle on stress, strain and temperature on the edge of carbide cutting tool in orthogonal cutting using fem simulation.  - itb journal of engineering science.  42B(2):179-194. 

z. effendi, r. ramli and j.a. ghani.  (2010).  a back propagation neural networks for grading jatropha curcas fruits maturity.  - american journal of applied sciences.  7(3):390-394. 

baba md. deros, dian darina indah daruis, ahmad rasdan ismail, nurfarhana abdullah sawal and jaharah a. ghani.  (2010).  work-related musculoskeletal disorders among workers` performing manual material handling work in an automotive manufacturing company.  - american journal of applied sciences.  7(8):1087-1092. 

g.a. ibrahim, c.h. che haron, j.a. ghani, h. arshad.  (2010).  taguchi optimization method for surface roughness and material removal rate in turning of ti-6al-4v eli.  - international review of mechanical engineering (ireme).  4(3):216-221. 

g. a. ibrahim, c. h. che haron and j. a. ghani.  (2009).  progression and wear mechanism of cvd carbide tools in turning ti-6al-4v eli.  - international journal of mechanical and materials engineering (ijmme).  4(1):35-41. 

a. g. jaharah, mohd nor azmi mohd rodzi, a. abdul rahman, mohd nizam ab. rahman and c. h. che hassan.  (2009).  machinabilty of fcd 500 ductile cast iron using coated carbide tool in dry machining condition.  - international journal of mechanical and materials engineering (ijmme).  4(3):279-284. 

a. g. jaharah, i. a. choudhury, h.h. masjuki and c. h. che hassan.  (2009).  surface integrity of aisih13 tool steel in end milling process.  - international journal of mechanical and materials engineering (ijmme).  4(1):88-92. 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, jaharah a ghani, baba md deros, nurhamidi mohamad, ahmad rasdan ismail.  (2009).  the implementation of spc in malaysian manufacturing companies.  - european journal of scientific research.  26(3):453-464. 

g.a. ibrahim, c.h. che haron, j.a. ghani.  (2009).  the effect of dry machining on surface integrity of titanium alloy ti-6a1-4v eli.  - journal of applied sciences.  9(1):121-127. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

m. j. ghazali, a. a. pauzi, c. h. azhari, j. a. ghani, a. b. sulong and r. mustafa.  (2009).  effect of starch binders in alumina coatings on aisi 316 l stainless steel for medical application.  - international journal of modern physics b.  23(6-7):1034-1039. 

a. r. ismail, m. r .a. rani, z. k. m. makhbul, k. sopian, m.m. tahir, j.a. ghani, c. meier.  (2009).  optimization of environmental factors: a study at malaysian automotive industry.  - european journal of scientific research.  27(4):500-509. 

jaharah a.g, wahid s.w, che hassan c.h, nuawi m.z, mohd nizam ab rahman.  (2009).  the effect of uncoated carbide tool geometries in turning aisi 1045 using finite element analysis.  - european journal of scientific research.  28(2):271-277. 

jaharah a.g, che hassan c.h, muhamad n.  (2009).  machined surface of aisi h13 tools steels when end milling using p10 tin coated carbide tools.  - european journal of scientific research.  26(2):247-254. 

ab rahman m.n., zain r.m., ghani j.a., nopiah z.m., ismail a.r., rahman s.a..  (2009).  barriers to implementing an online spc system in malaysian automotive manufacturing companies.  - european journal of scientific research.  30(2):315-325. 

z. yaakob, jaharah a. g, s.k. kamaruddin, w.r.w. daud, k.l. lim.  (2009).  the effect of catalyst metal loading and temperature on the reduction of carbon monoxide concentration in hydrogen production by steam reforming of methanol (srm).  - european journal of scientific research.  26(2):238-246. 

effendi z., ramli r., ghani j.a., yaakob z..  (2009).  development of jatropha curcas color grading system for ripeness evaluation.  - european journal of scientific research.  30(4):662-669. 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

budiman h., omar m.z., jalar a., jaharah a.g..  (2009).  effect of water cooling on the production of al-si thixotropic feedstock by cooling slope casting.  - european journal of scientific research.  32(2):158-166. 

ibrahim, g.a., che haron, c.h., ghani, j.a..  (2009).  surface integrity of ti-6al-4v eli when machined using coated carbide tools under dry cutting condition.  - international journal of mechanical and materials engineering.  4(2):191-196. 

nagi elmagrabi, che hassan c.h., jaharah a.g., f. m. shuaeib.  (2008).  high speed milling of ti-6al-4v using coated carbide tools.  - european journal of scientific research.  22(2):153-162. 

c. h. che haron, j. a. ghani, y. burhanuddin, y. k. seong, c. y. swee.  (2008).  copper and graphite electrodes performance in electrical-discharge machining of xw42 tool steel.  - journal of materials processing technology.  201(1-3):570-573. 

m.j. ghazali, j.a. ghani, m.z. omar.  (2007).  plastic deformation characteristics of worn precipitation-hardened aluminium alloys.  - international journal of mechanical & materials engineering.  2(2):125-129. 

s.m. tasirin, s.k. kamarudin, j.a. ghani, k.f. lee,.  (2007).  optimization of drying parameters of bird`s eye chilli in a fluidized bed dryer.  - journal of food engineering.  80: 695-700.. 

r. fadhila, a.g. jaharah, m.z. omar, c.h.c. haron, m.j. ghazali, and c. h. azhari.  (2007).  austenite formation of steel-3401 subjected to rapid cooling process.  - int. j of mech and material.  2(2):150-153.