mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, ahmad muhammad aziz, osama m. irfan.  (2023).  the microstructural refinement of the a356 alloy using semi-solid and severe plastic-deformation processing.  - metals.  1-24. 

muhammad saqlain iqbal, awais ali aslam, ramsha iftikhar, muhammad junaid, syed muhammad imran, muhammad shahid nazir, zulfiqar ali, muhammad zafar, ayesha kanwal, norinsan kamil othman, ujjwal pal, ai ling pang, mohsen ahmadipour.  (2023).  the potential of functionalized graphene-based composites for removing heavy metals and organic pollutants.  - journal of water process engineering.  1-23. 

syahidah nabila rosli, norinsan kamil othman, ahmad rifqi md zain.  (2023).  kajian terhadap eis dan kaedah kehilangan berat: novel perencat kakisan hijau daripada ekstrak etlingera elatior.  - sains malaysiana.  2323-2336. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, dawod mohamed elabar, farag ibrahim haider, saziana samat and osama m. irfan.  (2023).  effect of semisolid and heat treatment process on microstructural refinement of al-7si alloy.  - materials.  1-13. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  microstructure refinement by a combination of heat treatment and thixoforming process followed by severe plastic deformation and their effects on al-si alloy hardness.  - metals.  1-15. 

m. shah, m.t.m. ayob, n. yaakob, z. embong, n.k. othman.  (2022).  effect of hydrogen sulfide and chloride on the passive film structures of stainless-steel type 316 l.  - materialwissenschaft und werkstofftechnik.  1-8. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  combining heat treatment and high-pressure torsion to enhance the hardness and corrosion resistance of a356 alloy.  - metals.  1-12. 

mohd sofian alias, norinsan kamil othman, siti radiah mohd kamarudin, mohd hamzah harun, mahathir mohamed, nur ubaidah saidin, siti fatahiyah mohamad, zaifol samsu.  (2022).  influence of graphite particles in uv-curable corrosion protection coating from palm oil based urethane acrylate (pobua).  - industrial crops and products.  1-12. 

m. shah, m.t.m. ayob, n. yaakob, z. embong, n.k. othman.  (2022).  comparative corrosion behaviour of austenitic 316l and duplex 2205 stainless steels: microstructure and property evolution at high partial pressure of h2s.  - corrosion engineering, science and technology.  15-31. 

mazlan shah, najmiddin yaakob, muhammad taqiyuddin mawardi ayob, norinsan kamil othman.  (2022).  corrosion behavior of aisi 316l stainless steel in a highly sour environment.  - trends in sciences.  4642. 

abdul rashid abdul rahman, muhamad faiz md din, norinsan kamil othman, jianli wang, nur sabrina suhaimi, shi xue dou, noor fadzilah mohamed sharif, nazrul fariq makmor.  (2022).  the critical behaviour and magnetism of mncoge0.97al0.03 compounds.  - crystals.  1-14. 

rabiahtul zulkafli, norinsan kamil othman, najmiddin yaakob.  (2022).  pencirian permukaan kakisan keluli karbon dengan kehadiran konsortium bakteria penurun sulfat dalam persekitaran bergas co2.  - sains malaysiana.  3113-3123. 

naba jasim mohammed, norinsan kamil othman, mohamad fariz mohamad taib, mohd hazrie samat, solhan yahya.  (2021).  experimental and theoretical studies on extract of date palm seed as a green anti-corrosion agent in hydrochloric acid solution.  - molecules.  1-18. 

m. shah, m. t. m. ayob, r. rosdan, n. yaakob, z. embong, n. k. othman.  (2020).  the effect of h2s pressure on the formation of multiple corrosion products on 316l stainless steel surface.  - the scientific world journal.  1-11. 

nor hazirah mohd akhirudin, roslinda shamsudin, norinsan kamil othman.  (2020).  the effect of different concentrations of calcium silicate-maghemite coating towards magnetic behavior and bioactivity.  - sains malaysiana.  653-660. 

naba jasim mohammed, norinsan kamil othman.  (2020).  date palm seed extract as a green corrosion inhibitor in 0.5 m hcl medium for carbon steel: electrochemical measurement and weight loss studies.  - international journal of electrochemical science.  9597-9610. 

naba jasim mohammed, norinsan kamil othman.  (2020).  polarisation and electrochemical impedance spectroscopy studies on date palm seed extract as green corrosion inhibitors for carbon steel in 0.5 m hcl solution.  - international journal of psychosocial rehabilitation.  3325-3334. 

zurina ahmad saidi, norinsan kamil othman, koh kuan wei, amelia natasya abdul wahab, hukil sino, mohd jasmy abd rahman.  (2020).  optimum generation of e-parcel system as a empowerment module for academic student (emas).  - palarch's journal of archaeology of egypt/ egyptology.  30-48. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman.  (2019).  microstructural evaluation and corrosion resistance of semisolid cast a356 alloy processed by equal channel angular pressing.  - metals.  1-15. 

nk othman, s yahya, mc ismail.  (2019).  corrosion inhibition of steel in 3.5% nacl by rice straw extract.  - journal of industrial and engineering chemistry.  . 

s yahya, nk othman, mc ismail.  (2019).  corrosion inhibition of steel in multiple flow loop under 3.5% nacl in the presence of rice straw extracts, lignin and ethylene glycol.  - engineering failure analysis.  . 

nur hazira najmi, nur farhana m. yunos, norinsan kamil othman, muhammad asri idris.  (2019).  the correlation between structural and reduction kinetics of carbon from agricultural waste with hematite.  - journal of materials research and technology.  1720-1728. 

m. ili afiqah, yusri zulkafli, norinsan kamil othman, azwan lazim,wan nur aini wan mokhtar, mohd firdaus mohd yusoff.  (2019).  temperature effects toward corrosion rate of carbon and mild steel using red palm oil as natural corrosion inhibitor.  - malaysian journal of chemistry.  64-70. 

m.a. gebril, m.z. omar, n.k. othman & i.f. mohamed.  (2019).  microstructural refinement and corrosion resistance improvement of heat-treated a356 alloy processed by equal channel angular pressing.  - sains malaysiana.  2749-2757. 

mohamed a. gebril, m. zaidi. omar, nk. othman & i.f. mohamed.  (2019).  effect of equal channel angular pressing processing routes on corrosion resistance and hardness of heat treated a356 alloy.  - sains malaysiana.  661-668. 

fakhrul rifdi omar, emee marina salleh, norinsan kamil othman, fakhrozi che ani & zambri samsudin.  (2018).  the effect of electrochemical migration of pb-free sn-3.0ag-0.5cu solder reinforced by nio nanoparticles.  - journal of materials science and engineering a.  . 

fakhrozi che ani, azman jalar, abdullah aziz saad, chu yee khor, roslina ismail, zuraihana bachok, mohamad aizat abas, norinsan kamil othman.  (2018).  sac tio2 nano reinforced lead free solder joint characterizations in ultra fine package assembly.  - soldering surface mount technology.  1-13. 

emee marina salleh, norinsan kamil othman & azman jalar.  (2018).  electrochemical migration behaviour of sac305 solder in various concentrations of sodium hydroxide solution.  - sains malaysiana.  . 

emee marina salleh, hussain zuhailawati, siti noor fazliah mohd noor, norinsan kamil othman.  (2018).  in vitro biodegradation and mechanical properties of mg-zn alloy and mg-zn-hydroxyapatite composite produced by mechanical alloying for potential application in bone repair.  - metallurgical and materials transactions a: physical metallurgy and materials science.  . 

n.h. najmi, nur farhana m. yunos, n.k. othman, m.a. idris.  (2018).  characterisation of reduction of iron ore with carbonaceous materials.  - solid state phenomena.  . 

norinsan kamil othman, emee marina salleh, c. sarveswaran, fakhrozi che ani.  (2018).  effect of phosphorus and nickel on electrochemical migration of sn-3ag-0.7cu solder paste in simulated body fluid.  - solid state phenomena.  . 

f. che ani, a. jalar, r. ismail, z. mustafa, a.a. saad, c.y. khor, n. k. othman, m.y. tura ali, m.a.fatah m.mukhtar, aizat aba.  (2018).  tio2 nanoparticles reinforced lead free 96.5 sn 3.0ag 0.5cu solder paste for ultra fine package assembly in reflow soldering process.  - journal of advanced manufacturing technology.  . 

norliza ismail, roslina ismail, azman jalar, ghazali omar, emee marina salleh, norinsan kamil, irman abdul rahman.  (2018).  comparative study of interfacial interaction between aromatic and aliphatic functional group in solder wettability.  - journal of materials science: materials in electronics.  . 

emee marina salleh, zaifol samsu, norinsan kamil othman, azman jalar.  (2018).  kesan suhu celupan ke atas mikrostruktur dan kekerasan salutan aluminium pada keluli karbon.  - sains malaysiana.  . 

wilfred paulus, irman abdul rahman, azman jalar, norinsan kamil othman, roslina ismail, wan yusmawati wan yusoff, maria abu bakar.  (2017).  the relationship between xrd peak intensity and mechanical properties of irradiated lead-free solder.  - materials science forum.  423-427. 

naif h. al-hardan, muhammad azmi abdul hamid, azman jalar, roslinda shamsudin and norinsan kamil othman.  (2017).  synthesis of magnesium-doped zno rods via hydrothermal method: a study of the structural and optical properties.  - ecs journal of solid state science and technology.  571-577. 

nadia halib, nabilah bt nuairy, haslinda ramli, ishak ahmad, norinsan kamil othman, salihatun md salleh, saiful bahari bakarudin.  (2017).  preliminary assessment of salvadora persica whitening effects on extracted stained teeth.  - journal of applied pharmaceutical science.  121-125. 

mohd nazri idris, abdul razak daud, nurakma mahat, fathul karim sahrani & norinsan kamil othman.  (2016).  perlindungan biokakisan keluli karbon akibat bakteria penurun sulfat yang dipencil daripada minyak mentah tropika.  - sains malaysiana.  1835-1841. 

mohd nazri idris, abdul razak daud, norinsan kamil othman.  (2016).  analisis keberkesanan benziltrietilamonium klorida sebagai perencat kakisan bagi perlindungan keluli karbon.  - sains malaysiana.  271-277. 

naif al hardan, m.a.abdul hamid, naser m. ahmed, r shamsudin, n.k othman.  (2016).  ag/zno/p-si/ag heterojunction and their optoelectronic characteristics under different uv wavelength illumination.  - sensors and actuators a: physical.  50-57. 

f gharavi, f fadaeifard, k.a matori, r yunus, n.k. othman.  (2016).  mechanical and structural evaluation of friction stir welded 6061 aluminium alloy lap joints at different welding speeds.  - kovove materialy-metallic materials.  351-361. 

norinsan kamil othman, solhan yahya & denni asra awizar.  (2016).  anticorrosive properties of nano silicate from paddy husk in salt medium (sifat antikakisan nano silikat daripada sekam padi dalam medium air garam).  - sains malaysiana.  1253-1258. 

najmi n.h., yunos n.m., othman n.k., ismail a.n., idris m.a..  (2016).  agricultural waste as iron reductant for producing metallic iron in steelmaking.  - arpn journal of engineering and applied sciences.  9770-9775. 

naif h al hardan, muhammad azmi abdul hamid, naser m ahmed, azman jalar, roslinda shamsudin, norinsan kamil othman, lim kar keng, wee siong chiu and hamzah n. al rawi.  (2016).  high sensitivity ph sensor based on porous silicon (psi) extended gate field effect transistor.  - sensors.  1-12. 

che ani f., jalar a., ismail r., othman n.k., khor c.y., samsudin z., abdullah m.z., azmi a..  (2016).  backward compatibility solder joint formation at high peak reflow temperature for aerospace applications.  - arabian journal for science and engineering.  1813-1823. 

gharavi f., matori k.a., yunus r., othman n.k., fadaeifard f..  (2016).  corrosion evaluation of friction stir welded lap joints of aa6061-t6 aluminum alloy.  - transactions of nonferrous metals society of china (english edition).  684-696. 

al-hardan n.h., hamid m.a.a., shamsudin r., othman n.k., kar keng l..  (2016).  amperometric non-enzymatic hydrogen peroxide sensor based on aligned zinc oxide nanorods.  - sensors (switzerland).  1-6. 

nur akma mahat, norinsan kamil othman, fathul karim sahrani, mohd nazri idris.  (2015).  microbial corrosion of carbon steel by tropical environment consortium bacteria containing srb.  - american-eurasian journal of sustainable agriculture.  29-34. 

f che ani, a jalar, r ismail, nk othman, mz abdullah, ms abdul aziz, cy khor, m abu bakar.  (2015).  reflow optimization process: thermal stress using numerical analysis and intermetallic spallation in backwards compatibility solder joints.  - arabian journal for science and engineering.  1669-1679. 

naif h. al hardan, muhammad azmi abdul hamid naser m. ahmed, azman jalar, roslinda shamsudin, norinsan kamil othman, lim kar keng and sabah m. mohammed.  (2015).  a study on the uv photoresponse of hydrothermally grown zinc oxide nanorods with different aspect ratios.  - ieee sensors journal.  6811-6818. 

r. farma, m. deraman, s. soltaninejad, awitdrus, e. taer, m. m. ishak, n. s. m. nor, n. h. basri, b. n. m. dolah, n. k. othman, m. a. r. othman, r. daik, m. suleman, g. hegde.  (2015).  a new approach towards improving the specific energy and specific power of a carbon-based supercapacitor using platinum-nanoparticles on etched stainless steel current collector.  - electrochemistry.  1053-1060. 

nur akma mahat, norinsan kamil othman, fathul karim sahrani, mohd nazri idris.  (2015).  inhibition of consortium sulfate reducing bacteria from crude oil for carbon steel protection.  - sains malaysiana.  1587-1591. 

siti rahimah mohamad shafiee, airul ashri, muhammad yusri zulkafli, norinsan kamil othman, azwan mat lazim.  (2015).  kesan minyak sawit merah sebagai perencat kakisan tabii terhadap keluli karbon dan keluli lembut dalam 1 m asid hidroklorik (hcl).  - malaysian journal of analytical sciences.  679-691. 

farhad gharavi, khamirul amin matoria ,robiah yunus, norinsan kamil othman, firouz fadaeifard,.  (2015).  corrosion behavior of al6061 alloy weldment produced by friction stir welding process.  - journal of materials research and technology.  314-322. 

solhan yahya , norinsan kamil othman , abdul razak daud , azman jalar , roslina ismail.  (2015).  the influence of temperature on the inhibition of carbon steel corrosion in acidic lignin.  - anti-corrosion methods and materials.  301-306. 

ang lingyuen, norinsan kamil othman, azman jalar, ismayadi ismail.  (2015).  the effect of magnetic field on corrosion inhibitor of copper in 0.5 m nacl solution.  - american-eurasian journal of sustainable agriculture.  35-38. 

mohd nazri idris, abdul razak daud, nur akma mahat, mohd hafizuddin ab ghani, fathul karim sahrani, norinsan kamil othman.  (2015).  influence of benzyltriethylammonium chloride on biocorrosion activity of consortium bacteria from tropical crude oil.  - sains malaysiana.  1593-1598. 

gharavi f., matori k.a., yunus r., othman n.k..  (2014).  investigation of the nugget zone corrosion behavior in friction stir welded lap joints of 6061-t6 aluminum alloy.  - materials research.  1563 - 1574. 

nurul atikah sharif, azaman jalar, muhamad izhar sahri, norinsan kamil othman.  (2014).  effect of high temperature corrosion on austenitic stainless steel grade 304 in co2 gas at 700ºc.  - sains malaysiana.  1069-1075. 

wan yusmawati wan yusoff, roslina ismail, azman jalar, norinsan kamil othman, irman abdul rahman.  (2014).  microstructural evolution and micromechanical properties of gamma-irradiated au ball bonds.  - material characterization.  129-135. 

n. mohamad, a. jalar & n.k. othman.  (2014).  surface morphology study on aluminum alloy after treated with silicate-based corrosion inhibitor from paddy residue.  - sains malaysiana.  935-940. 

rabiahtul zulkafli, norinsan kamil othman*, irman abdul rahman, azman jalar.  (2014).  effect of rice straw extract and alkali lignin on the corrosion inhibition of carbon steel.  - the malaysian journal of analytical sciences.  204-211. 

muhammad izhar sahri, norinsan kamil othman, zaifol samsu and abdul razak daud.  (2014).  the influence of molten salt deposit in water vapor environment on corrosion behaviour of stainless steel at high temperature.  - australian journal of basic and applied science.  307-312. 

mohd nazri idris , abdul razak daud norinsan kamil othman.  (2014).  efficiency of benzyl dimethyl (2-hydroxyethyl) ammonium chloride as corrosion inhibitor in acetic acid.  - australian journal of basic and applied science.  174-179. 

zaifol samsu, norinsan kamil othman, abd razak daud, muhamad izhar sahri and muhammad daud.  (2014).  isothermal oxidation of low carbon steel coated by hot dipping in an al-la alloy.  - australian journal of basics and applied sciences.  1-6. 

azman jalar, nur azida che lah, norinsan kamil othman, roslinda shamsudin, abdul razak daud, and syed roslee sayd bakar.  (2014).  characterization of oxide growth on surface of al-mg-si welded joint.  - advances in materials science and engineering.  1-10. 

solhan yahya, norinsan kamil othman, abd razak daud, azman jalar.  (2014).  effect of scan rate on corrosion inhibition of carbon steel in the presence of rice straw extract-potentiodynamic studies.  - sains malaysiana.  1083-1087. 

abedini a., daud a.r., hamid m.a.a., othman n.k..  (2014).  ph-dependent magnetic phase transition of iron oxide nanoparticles synthesized by gamma-radiation reduction method.  - journal of radioanalytical and nuclear chemistry.  399 - 407. 

firouz fadaeifard, khamirul amin matori, meysam toozandehjani, abdul razak daud, mohd khairol anuar mohd ariffin, norinsan kamil othman, farhad gharavi, abdul hadi ramzani, farhad ostovan.  (2014).  influence of rotational speed on mechanical properties of friction stir lap welded 6061 t6 al alloy.  - transactions of nonferrous metals society of china.  24(4): 1004-1011. 

yahya s., othman n.k., daud a.r., jalar a..  (2014).  effect of scan rate on corrosion inhibition of carbon steel in the presence of rice straw extract - potentiodynamic studies.  - sains malaysiana.  1083 - 1087. 

alam abedini, abdul razak daud, muhammad azmi abdul hamid, norinsan kamil othman.  (2014).  radiolytic formation of fe3o4 nanoparticles: influence of radiation dose on structure and magnetic properties.  - plos one.  9(3):1-8. 

gharavi f., matori k.a., yunus r., othman n.k..  (2014).  corrosion behavior of friction stir welded lap joints of aa6061-t6 aluminum alloy.  - materials research.  672 - 681. 

denni asra awizar, norinsan kamil othman, azman jalar, abdul razak daud, i. abdul rahman1 dan n. h. al-hardan.  (2013).  nanosilicate extraction from rice husk ash as green corrosion inhibitor.  - international journal of electrochemical science.  8(2):1759-1769. 

alam abedini, abdul razak daud, muhammad azmi abdul hamid, norinsan kamil othman and elias saion.  (2013).  a review on radiation-induced nucleation and growth of colloidal metallic nanoparticles.  - nanoscale research letters.  474. 

s. yahya, n.k. othman*, a.r. daud & a. jalar.  (2013).  surface morphology studies of low carbon steel treated in aqueous lignin.  - sains malaysiana.  42(12):1793-1798. 

zulkifli, m.n., jalar, a., abdullah, s., rahman, i.a., othman, n.k..  (2013).  effect of applied load in the nanoindentation of gold ball bonds.  - journal of electronic materials.  42(6):1063-1072. 

muhammad nubli zulkifli, shahrum abdullah, norinsan kamil othman, azman jalar.  (2012).  some thoughts on bondability and strength of gold wire bonding.  - gold bulletin.  45:115-125. 

c.l. nur azida, a. jalar, n.k. othman, a.r. daud.  (2011).  oxidation effect on welded aa6061 al alloy using er4043 filler metal.  - journal of applied mechanics and materials.  66-68:46-49. 

wan yusmawati wan yusoff, azman jalar, norinsan kamil othman, irman abdul rahman.  (2011).  effect of gamma-irradiation towards stress-strain curve of single die qfn package.  - materials science forum.  694:620-624. 

n. k. othman, j. zhang and d. j. young.  (2011).  effect of water vapour on cyclic oxidation of fe-cr alloys.  - materials and corrosion.  62(6):496-503. 

n. k. othman, n. othman, j. zhang, d. j. young.  (2010).  kesan wap air terhadap pengoksidaan berkitar pada aloi fe-cr.  - sains malaysiana.  39(2): 249-259. 

n.k. othman, j. zhang and d.j. young.  (2010).  temperature and water vapour effects on the cyclic oxidation behaviour of fe-cr alloys.  - corrosion science.  52:2827-2836. 

othman n.k., zhang j., young d.j..  (2010).  water vapour effects on fe-cr alloy oxidation.  - oxidation of metals.  73(1-2):337-352. 

n.k. othman, n. othman, j. zhang, d.j. young.  (2009).  effects of water vapour on isothermal oxidation of chromia forming alloys in ar/o2 and ar/h2 atmospheres.  - corrosion science.  51(12):3039-3049. 

othman, n.k., zhang, j., young, d.j..  (2009).  kinetic and microstructural analyses of chromia forming alloys during cyclic oxidation.  - journal of the chinese society of corrosion and protection.  29(4):315.