afida jemat, masfueh razali, yuichi otsuka, mariyam jameelah ghazali.  (2023).  enhancement of human gingival fibroblasts bioactivity and proliferation on plasma sprayed yttria-stabilised zirconia/tio2 surface coating of titanium alloys: an in-vitro study.  - coatings.  1-13. 

alireza doroudi, hamid omidvar, ali dastgheib, mohammad khorram, armin rajabi, amir hossein baghdadi, and mariyam jameelah ghazali.  (2023).  effect of mbf-20 interlayer on the microstructure and corrosion behaviour of inconel 625 super alloy after diffusion brazing.  - materials.  1-18. 

dinesh dhande, shirish navale, d.p. gaikwad, d.v. wadkar, s.r. patil, r.d. nalawade, mariyam j. ghazali, w.b. wan nik.  (2023).  prediction of abrasive wear behavior of the poly-tetra-fluoroethylene material using adaptive neuro fuzzy interface systems.  - jurnal tribologi.  141-159. 

h.n. abu bakar, j.a. ghani, c.h. che haron, m.j. ghazali , m.s. kasim, s. al-zubaidi, n. jouini.  (2023).  wear mechanisms of solid carbide cutting tools in dry and cryogenic machining of aisi h13 steel with varying cutting-edge radius.  - wear.  1-8. 

nurulhuda mohd, masfueh razali, mariyam jameelah ghazali, noor hayaty abu kasim.  (2022).  current advances of three-dimensional bioprinting application in dentistry: a scoping review.  - materials.  1-25. 

nurulhuda mohd, masfueh razali, mariyam jameelah ghazali, noor hayaty abu kasim.  (2022).  3d-printed hydroxyapatite and tricalcium phosphates-based scaffolds for alveolar bone regeneration in animal models: a scoping review.  - materials.  1-16. 

yusliza yusuf, mariyam jameelah ghazali, jariah mohamad juoi, toibah abd rahim, zaleha mustafa.  (2022).  plasma-sprayed tio2 coatings: hydrophobicity enhanced by zno additions.  - international journal of applied ceramic technology.  2213-2221. 

armin rajabi, peter hodgson, mariyam j. ghazali, zainuddin sajuri, alireza almaslow, hamid ahmad mehrabi, amir hossein baghdadi.  (2022).  challenges and solutions in the synthesis of nano-ticn: a review.  - ceramic international.  8921-8929. 

nilofar asim, mohd sukor suait, marzieh badiei, masita mohammad, md. akhtaruzzaman, armin rajabi, nowshad amin and mariyam jameelah ghazali.  (2022).  perspectives in biopolymer-graphene-based composite application: advances, challenges, and recommendations.  - nanotechnology reviews.  1525-1554. 

nilofar asim , marzieh badiei, masita mohammad, halim razali , armin rajabi , lim chin haw, mariyam jameelah ghazali.  (2022).  sustainability of heating, ventilation and air-conditioning (hvac) systems in buildings-an overview.  - international journal of environmental research and public health.  1-16. 

yusliza yusuf, mariyam jameelah ghazali, mohd fadzli bin abdollah.  (2022).  self-cleaning plasma sprayed tio2 coatings modified by laser surface texturing process.  - junral tribologi.  39-55. 

m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed.  (2022).  microstructure evaluation and mechanical properties of thixoformed al-5.7si-2cu-0.3mg aluminum alloys.  - international journal of metalcasting.  370-384. 

nabilah ismail, siti mariana mujad, mohammad fakhratul ridwan zulkifli, vincent onuegbu izionworu, mariyam jameelah ghazali, wan mohd norsani wan nik.  (2022).  a review on application of marine algae as green corrosion inhibitors in acid medium.  - vietnam journal of chemistry.  409-416. 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri.  (2022).  wear debris analyses of nimonic 263 under high temperature fretting condition.  - jurnal tribologi.  118-129. 

noor khairin mohd, yeong shoot kian, nor azowa ibrahim, siti mariam mohd nor, wan md zin wan yunus, mariyam jameelah ghazali, lim wen huei.  (2021).  corrosion inhibition, adsorption and thermodynamic properties of hydrophobic-tailed imines on carbon steel in hydrochloric acid solution: a comparative study.  - journal of adhesion science and technology.  2558-2579. 

mariyam j. ghazali, xu ren, armin rajabi, wan fathul hakim w. zamr, nadia mohd mustafah and jing ni.  (2021).  finite element analysis of cushioned diabetic footwear using ethylene vinyl acetate polymer.  - polymer.  1-12. 

isyraf aznam, joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali.  (2021).  electrophoretic deposition of (cu,mn,co)3o4 spinel coating on sus430 ferritic stainless steel: process and performance evaluation for solid oxide fuel cell interconnect applications.  - journal of the european ceramic society.  1360-1373. 

elaine zi fan soh, ohnmar htwe, amaramalar selvi naicker, armin rajabi nasirabadi, mariyam jameelah ghazali, nadia mohd mustafah, irraivan elamvazuthi, brenda saria yuliawiratman, manimalar selvinaicker.  (2020).  stepease diabetic socks: an answer to efficacious indoor foot pressure relief - a prospective study.  - journal of tissue viability.  104-109. 

joelle chia wen mah, muhamad isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2020).  cr vaporisation and oxidation behaviour of sus430 stainless steel in the simulated cathodic environment of solid oxide fuel cells.  - malaysian journal of microscopy.  124-132. 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri.  (2020).  fretting wear properties of nimonic 263 at elevated temperatures.  - jurnal tribologi.  1-14. 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri and armin rajabi.  (2020).  wear characteristics of superalloy and hardface coatings in gas turbine applications - a review.  - metals.  1-14. 

zahra mahmoudi, seyed hadi tabaian, hamid reza rezaie, farzad mahboubi, mariyam jameelah ghazali.  (2020).  synthesis of ti2alc and ti3alc2 max phases by arc-pvd using tial target in c2h2/ ar gas mixture and subsequent annealing.  - ceramics international.  4968-4975. 

m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed, b. rashid.  (2020).  dry sliding wear behaviour of thixoformed al-5.7si-2cu-0.3 mg alloys at high temperatures using taguchi method.  - wear.  1-12. 

yusliza yusuf, mariyam jameelah ghazali, yuichi otsuka, kiyoshi ohnuma, sarita morakul, susumu nakamura, mohd fadzli abdollah.  (2020).  antibacterial properties of laser surface-textured tio2/zno ceramic coatings.  - ceramics international.  3949-3959. 

siti atiqa al zahra mat darus, mariyam jameelah ghazali, che husna azhari, rozli zulkifli, ahmad adlie shamsuri.  (2020).  mechanical properties of gigantochloa scortechinii bamboo particle reinforced semirigid polyvinyl chloride composites.  - jurnal teknologi.  15-22. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

yusliza yusuf, mariyam jameelah ghazali, yuichi otsuka, sarita morakul, susumu nakamura, kiyoshi ohnuma, mohd fadzli bin abdollah.  (2019).  wettability characteristics of laser surface textured plasma sprayed tio2/zno coatings.  - tribology online.  279-284. 

juyana abdul wahab, mariyam jameelah ghazali.  (2019).  erosion resistance of laser textured plasma-sprayed al2o3-13%tio2 coatings on mild steel.  - wear.  2029-2037. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  surface characterisation of ticxn1x coatings processed by cathodic arc physical vapour deposition: xps and xrd analysis.  - surface and interface analysis.  611-617. 

isyraf aznam, joelle mah chia wen, andanastuti muchtar, nurul akidah baharuddin, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  kelakuan pengoksidaan keluli tahan karat berferit sus430 dan kesan pemeruapan spesies cr bergas kepada permukaan katod lscf dalam suhu operasi sel fuel oksida pepejal.  - sains malaysiana.  861-869. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  the study on the properties of ticn coatings processed by cathodic arc physical vapour deposition.  - tribology - materials, surfaces & interfaces.  58-66. 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2019).  effect of sintering temperature on the aging resistance and mechanical properties of monolithic zirconia.  - journal of materials research technology.  1092-1101. 

armin rajabi, mariyam jameelah ghazali, ebrahim mahmoudi, amir hossein baghdadi, abdul wahab mohammad, nadia mohd mustafah, htwe ohnmar, amaramalar selvi naicker.  (2019).  synthesis, characterization, and antibacterial activity of ag2o-loaded polyethylene terephthalate fabric via ultrasonic method.  - nanomaterials.  450-462. 

hasrawati abu hassan, mariyam jameelah ghazali, cevdet meric, che husna azhari.  (2019).  wettability effect of the surface morphologies of musa acuminata leaves.  - bioresources.  8331-8344. 

muhammad sufiyan amril, noor faeizah amat, yew hsu zenn, andanastuti muchtar, mariyam jameelah ghazali.  (2019).  influences of oral environment on natural enamel and zirconia crown: a short review.  - journal of advanced research in fluid mechanics and thermal sciences.  156-162. 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  review on oxidation behavior and chromium volatilization of fe-cr-based interconnects at high operation temperatures of solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences.  148-155. 

a.rajabi, m.j. ghazali, e. mahmoudi, s. azizkhani, n.h. sulaiman, a.w. mohammad, n.m. mustafah, h. ohnmar, a.s. naicker.  (2018).  development and antibacterial application of nanocomposites: effects of molar ratio on ag2o-cuo nanocomposite synthesised via the microwave-assisted route.  - ceramics international.  21591-21598. 

kin yuen leong, idayu razali, k.z. ku ahmad, hwai chyuan ong, m.j. ghazali, mohd rosdzimin abdul rahman.  (2018).  thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: an experimental approach.  - international communications in heat and mass transfer.  23-28. 

jumril yunas, noor humam sulaiman, and mariyam jameelah ghazali.  (2018).  synthesis of calcium ferrite nanoparticles (cafe2o4-nps) using auto-combustion method for targeted drug delivery.  - key engineering materials.  . 

noor faeizah amat, shari lawuo raji, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2018).  influence of presintering parameters on the mechanical properties of presintered dental zirconia block.  - international journal of integrated engineering.  . 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali..  (2018).  a review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells.  - journal of zhejiang university: science a.  . 

dinesh ragurajan, mohsen golieskardi, meenaloshini satgunam, md enamul hoque, angela min hwei ng, mariyam jameelah ghazali, ahmad kamal ariffin.  (2018).  advanced 3y-tzp bioceramic doped with al2o3 and mno2 particles potentially for biomedical applications: study on mechanical and degradation properties.  - journal of materials research and technology.  . 

isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali, joelle chia wen mah, nurul akidah baharuddin.  (2018).  interconnect development for solid oxide fuel cell application.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

a. jemat, m.j. ghazali, m. razali, y. otsuka, a. rajabi,.  (2018).  effects of tio2 on microstructural, mechanical properties and in-vitro bioactivity of plasma sprayed yttria stabilised zirconia coatings for dental application.  - ceramics international.  4271-4281. 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali and norziha yahaya.  (2018).  preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing.  - ceramics international.  6409-6416. 

m. a. abdelgnei, m. z. omar, m. j. ghazali, mohamed a. gebril and m. n. mohammed.  (2018).  dry sliding wear behaviour of rheocast al-5.7si-2cu-0.3mg alloy.  - international journal of engineering & technology.  . 

n.h. sulaiman, m.j. ghazali, j. yunas, a. rajabi, b.y. majlis, m. razali.  (2018).  synthesis and characterization of cafe2o4 nanoparticles via co-precipitation and auto-combustion methods.  - ceramic international.  46-50. 

afida jemat, mariyam jameelah ghazali, masfueh razali, yuichi otsuka.  (2018).  microstructural, surface roughness and wettability of titanium alloy coated by yzp/tio2 for dental application.  - jurnal teknologi.  . 

ahmad afiq pauzi, salmi mohd yunus, shuib husin, mariyam jameelah ghazali, wan fathul hakim w zamri.  (2018).  wear characteristics of a combustion liner for power generation gas turbine.  - international journal of materials and product technology.  . 

nidal wanis elshereksi, mariyam jameelah ghazali, andanastuti muchtar & che husna azhari.  (2017).  review of titanate coupling agents and their application for dental composite fabrication.  - dental materials journal.  539-552. 

khaled salem alhawari, mohd zaidi omar, mariyam jameelah ghazali, mohd shukor salleh, mohammed naser abdulrazaq.  (2017).  effect of thixoforming on the wear properties of al-si-cu aluminium alloy.  - jurnal teknologi.  . 

armin rajabi, mariyam j. ghazali.  (2017).  quantitative analyses of tic nanopowders via mechanical alloying method.  - ceramics international.  14233-14242. 

nidal w. elshereksi, mariyam jameelah ghazali, andanastuti muchtar, che husna azhari.  (2017).  studies on the effects of titanate and silane coupling agents on the performance of poly (methyl methacrylate)/barium titanate denture base nanocomposites.  - journal of dentistry.  121-132. 

faraziah hassan, rozli zulkifli, mariyam jameelah ghazali, che husna azhari.  (2017).  kenaf fiber composite in automotive industry: an overview.  - international journal on advanced science, engineering and information technology.  315-321. 

k.s. alhawari, m.z. omar, m.j. ghazali, m.s. salleh, m.n. mohammed.  (2017).  microstructural evolution during semisolid processing of al-si-cu alloy with different mg contents.  - transactions of nonferrous metals society of china.  1483-1497. 

joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali, jarot raharjo.  (2017).  formation of sol-gel derived (cu,mn,co)3o4 spinel and its electrical properties.  - ceramics international.  7641-7646. 

sh hamdan, wwf chong, j-h ng, mj ghazali, rjk wood.  (2017).  influence of fatty acid methyl ester composition on tribological properties of vegetable oils and duck fat derived biodiesel.  - tribology international.  76-82. 

ky leong, kz ku ahmad, hwai chyuan ong, mj ghazali, azizah baharum.  (2017).  synthesis and thermal conductivity characteristic of hybrid nanofluids: a review.  - renewable & sustainable energy reviews.  868-878. 

bushra rashid, mohammed zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali, mohamad ridzwan ishak.  (2017).  dynamic mechanical analysis of treated and untreated sugar palm fibre-based phenolic composites.  - bioresources.  3448-3462. 

mariyam jameelah ghazali, ahmad firdaus shamsul baharin, juyana a wahab, andanastuti muchtar.  (2017).  erosive wear resistance of dimpled ceramic coatings on mild steels.  - industrial lubrication and tribology.  155-159. 

mohd,n k, mariyam jameelah ghazali, yeong shoot kian, nor azowa ibrahim, wan md zin wan yunus, siti mariam mohd nor, zainab idris.  (2017).  corrosion inhibition of mild steel in hydrochloric acid solution using fatty acid derivatives.  - journal of oil palm research.  97-109. 

b rashid, z leman, m jawaid, mj ghazali, mr ishak, ma abdelgnei.  (2017).  dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique.  - wear.  26-35. 

joelle c.w. mah, andanastuti muchtar, mahendra rao somalu, mariyam j. ghazali.  (2017).  metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques.  - international journal of hydrogen energy.  9219-9229. 

j. a. wahab,m. j. ghazali, z. sajuri, y. otsuka, m. jayaprakash, s. nakamura, a. f. s. baharin.  (2017).  effects of micro-grooves on tribological behaviour of plasma-sprayed alumina-13%titania coatings.  - ceramic international.  6410-6416. 

b rashid, z leman, m jawaid, mj ghazali, mr ishak.  (2017).  effect of treatments on the physical and morphological properties of spf/phenolic composites.  - journal of natural fibers.  1-13. 

bushra rashid, zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali, mohamad ridzwan ishak.  (2017).  influence of treatments on the mechanical and thermal properties of sugar palm fibre reinforced phenolic composites.  - bioresources.  1447-1462. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali and norziha yahaya.  (2017).  effect of ph of suspension and mechanical treatment on nanosized zirconia dispersion.  - journal of mechanical engineering.  10-19. 

mariyam jameelah ghazali, hasrawati abu hassan, che husna azhari, fatma azura mamat.  (2016).  the bio-adhesion behaviour of banana leaves as soil remover at elevated temperatures.  - tribology online.  264-271. 

aa pauzi, mj ghazali, s mohd yunus, wfhw zamri, ch azhari, s husin.  (2016).  wear characteristics of commercial gas turbine components.  - tribology - materials, surfaces & interfaces.  82-85. 

bushra rashid, z. leman, m. jawaid, m. j. ghazali, m. r. ishak.  (2016).  physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment.  - cellulose.  2905-2916. 

k. s. alhawari, m. z. omar, m. j. ghazali, m. s. salleh and m. n. mohammed.  (2016).  dry sliding wear behaviour of thixoformed hypoeutectic al-si-cu alloy with different amounts of magnesium.  - composite interfaces.  519-531. 

m.j. ghazali, s.m. forghani, n. hassanuddin, a. muchtar, a.r.daud.  (2016).  comparative wear study of plasma sprayed tio2 and al2o3-tio2 on mild steels.  - tribology international.  681-686. 

j. a. wahab, m. j. ghazali, w. m. w. yusoff and z. sajuri.  (2016).  enhancing material performance through laser surface texturing: a review.  - transactions of the imf.  193-198. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1
x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

mohd fadzli bin abdollah, noritsugu umehara, mariyam jameelah binti ghazali and mohamed el mansori.  (2016).  introduction-advances and challenges in carbon-based tribomaterials.  - journal of materials research.  1. 

bushra rashid, zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali and mohamad ridzwan ishak.  (2016).  the mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites.  - international journal of precision engineering and manufacturing.  1001-1008. 

k. a. zakaria, s. abdullah & m. j. ghazali.  (2016).  a review of the loading sequence effects on the fatigue life behaviour of metallic materials.  - journal of engineering science and technology review.  189-200. 

ahmad firdaus shamsul baharin, mariyam jameelah ghazali, juyana a. wahab.  (2016).  laser surface texturing and its contribution to friction and wear reduction: a brief review.  - industrial lubrication and tribology.  57-66. 

d. ragurajan, m. satgunam, m. golieskardi, a.k. ariffin and m.j. ghazali.  (2016).  effect of air sintering on microstructural and mechanical properties of aluminum oxide / manganese oxide doped y- tzp.  - journal of the australian ceramic society.  128-133. 

salmi mohd yunus, mariyam jameelah ghazali, wan fathul hakim w zamrib, ahmad afiq pauzi, shuib husin.  (2015).  characterisations of chromium carbide-based coated combustor liner for gas turbines.  - jurnal teknologi.  33-36. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

p.c. siow, j.a. ghani, r.j. talib, m.j. ghazali, c.h. che haron.  (2015).  characterization using xps and xrd of ti(c,n) coating properties for cutting tool applications.  - interceram: international ceramic review.  287-290. 

a. jemat, m. j. ghazali, m. razali, and y. otsuka.  (2015).  surface modifications and their effects on titanium dental implants.  - biomed research international.  1-11. 

h. m. hajar, m.j. suriani, m.g.m. sabri, m.j. ghazali and w. b. wan nik.  (2015).  corrosion performance of coating thickness in marine environment.  - biosciences biotechnology research asia.  71-76. 

m.j. ghazali, m. daud, a. muhammad, m.z. omar, c.h. azhari.  (2015).  microstructure analyses of malay keris and its relation to mechanical properties.  - acta physica polonica a.  1358-1362. 

n.h. sulaimana, m.j. ghazali, b.y. majlis, j. yunas and m. razali.  (2015).  superparamagnetic calcium ferrite nanoparticles synthesized using a simple sol gel method for targeted drug delivery.  - bio-medical materials and engineering.  103-110. 

a. rajabi, m.j. ghazali, a.r. daud.  (2015).  effect of second phase morphology on wear resistance of fe-tic composites.  - jurnal tribologi.  1-9. 

rajabi a., ghazali m.j., daud a.r..  (2015).  chemical composition, microstructure and sintering temperature modifications on mechanical properties of tic-based cermet : a review.  - materials & design.  95-106. 

kai yuan theng, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2015).  development of translucent zirconia for dental crown applications.  - asian journal of scientific research.  342-350. 

k.s. alhawari, m.z. omar, m.j. ghazali, m.s. salleh, m.n. mohammed.  (2015).  evaluation of the microstructure and dry sliding wear behaviour of thixoformed a319 aluminium alloy.  - materials and design.  169-180. 

karim z., nuawi m.z., ghani j.a., ghazali m.j., abdullah s., mansor n.i.i..  (2015).  sliding wear evaluation of aluminum alloy (7075-t6) on hardened steel (aisi4340) via non-contact technique by i-kaz™ multi-level analysis.  - wear.  99-104. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  ungkapan kamiran-j retak permukaan pada bar silinder padu kenaan beban ragam i.  - jurnal teknologi (sciences and engineering).  7 - 17. 

theng kai yuan, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2014).  review on the translucency of zirconia (y-tzp) ceramics for dental crown applications.  - australian journal of basic and applied sciences.  252-257. 

afida jemat, mariyam jameelah ghazali, masfueh razali, yuichi otsuka.  (2014).  effects of surface treatment on titanium for dental implants: a review.  - australian journal of basic and applied sciences.  131-133. 

a. rajabi, m.j. ghazali, j. syarif , a.r. daud.  (2014).  development and application of tool wear: a review of the characterization of tic-based cermets with different binders.  - chemical engineering journal.  255: 445-452. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali, norziha yahaya.  (2014).  suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing.  - ceramics international.  40(4):5413-5419. 

k. a zakaria, s. abdullah, m. j. ghazali, m. z. nuawi, s.m. beden & z. m. nopiah.  (2014).  fatigue strain signal behaviour and damage assessment of an engine mount bracket.  - journal of scientific & industrial research.  73(2014):112-116. 

s.m. forghani, mj ghazali, a. muchtar, a.r. daud.  (2014).  mechanical properties of plasma sprayed nanostructured tio2 coatings on mild steel.  - ceramics international.  40 (2014):7049-7056. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, and che h. azhari.  (2014).  perspectives for titanium-derived fillers usage on denture base composite construction: a review article.  - advances in materials science and engineering.  1-13. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  j-integral evaluation of surface cracks in round bar under mode iii loadings.  - research journal of applied sciences, engineering and technology.  1985 - 1993. 

k.a. zakaria, s. abdullah, m.j. ghazali.  (2013).  comparative study of fatigue life behaviour of aa6061 and aa7075 alloys under spectrum loadings.  - materials and design.  49:48-57. 

k.a. zakaria, s. abdullah, m.j. ghazali, c.h. azhari.  (2013).  influence of spectrum loading sequences on fatigue life in a high-temperature environment.  - engineering failure analysis.  30:111-123. 

s.m. forghani, m.j. ghazali, a. muchtar, a.r. daud, n.h.n. yusoff, c.h. azhari.  (2013).  effects of plasma spray parameters on tio2-coated mild steel using design of experiment (doe) approach.  - ceramics international.  39(3):3121-3127. 

a. almaslow, m.j. ghazali, r.j. talib, c.t. ratnam, c.h. azhari.  (2013).  effects of epoxidized natural rubber-alumina nanoparticles (enran) composites in semi-metallic brake friction materials.  - wear.  302:1392-1396. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar.  (2013).  effects of powder size and metallic bonding layer on corrosion behaviour of plasma-sprayed al2o3-13% tio2 coated mild steel in fresh tropical seawater.  - ceramics international.  39(3):2527-2533. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

anasyida abu seman, abdul razak daud, mariyam jameelah ghazali.  (2013).  wear behaviour of eutectic and hypoeutectic al-si-mg-ce alloys.  - industrial lubrication and tribology.  65(2):135-140. 

junaidi syarif, agung iswadi, mariyam jameelah ghazali, zainuddin sajuri, mohd zaidi omar.  (2013).  wear behavior of copper-containing ferritic iron under a dry sliding condition.  - journal of zhejiang university - science a.  14(14):906-914. 

m.j. ghazali, n.i.i. mansor, m.z. nuawi, j.a. ghani.  (2013).  facile wear failure monitoring of commercial bearing alloys using i-kaz method.  - engineering failure analysis.  35:545-553. 

a. almaslow, c.t. ratnam, m.j. ghazali, r.j. talib, c.h. azhari.  (2013).  effects of electron-beam and sulfur crosslinking of epoxidized natural rubber on the friction performance of semimetallic friction materials.  - composites part b: engineering.  54:377-382. 

noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2012).  a review of zirconia as a dental restorative material.  - australian journal of basic and applied sciences.  6(12):9-13. 

a.f.a. rasid, t.i. mohamad, m.j. ghazali and w.m.f.w. mahmood.  (2012).  effects of lubricant temperature in a motorized engine.  - world applied sciences journal.  927-930. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali.  (2012).  stress intensity factors for surface cracks in round bar under single and combined loadings.  - meccanica.  47:1141-1156. 

herman praktino, mariyam jameelah ghazali, a.r. daud.  (2012).  effects of manganese addition on tensile strength of aa6063 alloy for marine application.  - jurnal teknologi (sciences & engineering).  59(2):87-89. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar, s.m. forghani.  (2012).  optimization of plasma spray parameters on the mechanical properties of agglomerated al2o3-13%tio2 coated mild steel.  - materials & design.  39:504-508. 

a. e. ismail, a. k. ariffin, s. abdullah & m. j. chazali.  (2012).  stress intensity factors under combined tension and torsion loadings.  - indian journal of engineering & materials sciences.  19:5-16. 

shahrum abdullah, kamarul ariffin zakaria, mariyam jameelah ghazali.  (2012).  observation of the fatigue crack propagation rate of an aluminum alloy specimen under fatigue spectrum loadings.  - materials testing.  54(10):663-673. 

wan nik, w.b., zulkifli, m.f., rosliza, r., ghazali, m.j., khaled, k.f..  (2011).  potential of honey as corrosion inhibitor for aluminium alloy in seawater.  - world applied sciences journal.  . 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624. 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2011).  optimization of integrated kurtosis-based algorithm for z-filter (i-kaz ) tm coefficient using multi level signal decomposition technique.  - world applied sciences journal.  14 (10): 1541-1548. 

a. e. ismail, a. k. ariffin, s. abdullah and m. j. ghazali.  (2011).  off-set crack propagation analysis under mixed mode loadings.  - international journal of automotive technology.  12(2):225-232. 

halina misran, ramesh singh, mariyam jameelah ghazali.  (2011).  palm oil based fatty alcholos templated mesoporous silica and silica spheres.  - international journal of nanoscience.  10(6):1275-1281. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a. muchtar, s. m. forghani.  (2011).  effect of particle size and bonding layer on plasma sprayed al 2o 3-13%tio 2 coatings.  - international journal of mechanical and materials engineering.  6(3):385-390. 

m. j. ghazali, s. e. mat kamal, s. abdullah and h. misran.  (2011).  characterizations of cu-based coated al7075 via plasma-spray method - a wear case study.  - international journal of nanoscience.  10(6):1269-1274. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2011).  probabilistic high cycle multiaxial fatigue analysis using finite element method.  - transactions hong kong institution of engineers.  18(2):13-18. 

a.j. helmisyah, s. abdullah, m.j. ghazali.  (2011).  structure integrity analysis of piston crown against thermal stress for compressed natural gas direct injection engine.  - engineering e-transaction.  6(2):169-174. 

a.e.ismal, a.k.ariffin, s.abdullah dan m.j.ghazali.  (2010).  stress intensity factors for surface cracks in round bars under combined bending and torsion loadings.  - international review of mechanical engineering (ireme).  4(7):827-832. 

mohamad, n; muchtar, a; ghazali, mj; mohd, dhj; azhari, ch.  (2010).  epoxidized natural rubber-alumina nanoparticle composites: optimization of mixer parameters via response surface methodology.  - journal of applied polymer science.  115(1):183-189. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj. mohd and che husna azhari.  (2010).  correlation of filler loading and silane coupling agent on the physical characteristics of epoxidized natural rubber-alumina nanoparticles composites.  - journal of elastomers and plastics.  . 

anasyida a.s., daud a.r., ghazali m.j..  (2010).  dry sliding wear behaviour of al-12si-4mg alloy with cerium addition.  - materials and design.  31(1):365-374. 

mj ghazali, mz nuawi, nii mansor.  (2009).  low cost wear monitoring of bearing shell in connecting rod via i-kaz method.  - advanced materials research.  76-78:702-707. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

m. j. ghazali, a. a. pauzi, c. h. azhari, j. a. ghani, a. b. sulong and r. mustafa.  (2009).  effect of starch binders in alumina coatings on aisi 316 l stainless steel for medical application.  - international journal of modern physics b.  23(6-7):1034-1039. 

rozli zulkifli, che husna azhari, maryam j. ghazali, ahmad rasdan ismail, abu bakar sulong.  (2009).  interlaminar fracture toughness of multi-layer woven silk/epoxy composites treated with coupling agent.  - european journal of scientific research.  27(3):454-462. 

n. i. i. mansor, m. j. ghazali, m. z. nuawi and s. e. m. kamal.  (2009).  monitoring bearing condition using airborne sound.  - international journal on mechanical and materials engineering.  4(2):152-155. 

m. n. wahab, a. r. daud and m. j. ghazali.  (2009).  preparation and characterization of stir cast-aluminum nitride reinforced aluminum metal matrix composites.  - international journal of mechanical and materials engineering.  4(2):115-117. 

k.m. adel, a.s. dhia and m.j. ghazali.  (2009).  the effect of laser surface hardening on the wear and friction characteristics of acicular bainitic ductile iron.  - international journal of mechanical and materials engineering (ijmme).  4(2):167-171. 

omar m.z., atkinson h.v., howe a.a., palmiere e.j., kapranos p., ghazali m.j..  (2009).  solid-liquid structural break-up in m2 tool steel for semi-solid metal processing.  - journal of materials science.  44(3):869-874. 

a. s. anasyida, a. r. daud and m. j. ghazali.  (2009).  dry sliding wear behaviour of al-4si-4mg alloys by addition of cerium.  - international journal of mechanical and materials engineering (ijmme).  4(2):127-130. 

m.j. ghazali, w.m. rainforth, m.z. omar.  (2008).  a comparative study of mechanically mixed layers (mmls) characteristics of commercial aluminium alloys sliding against alumina and steel sliders.  - journal of materials processing technology.  201(1-3):662-668. 

a. k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2008).  probabilistic analysis of cracked structures with uncertainty parameters.  - advanced materials research.  33-37(1):223-228. 

m.j. ghazali, w.m. rainforth, s. abdullah, a.k.a. ihsan & m. hassan.  (2008).  subsurface deformation of worn al-cu and al-mg alloys.  - advanced materials research.  33-37:483-488. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj mohd, che husna azhari.  (2008).  the effect of filler on epoxidised natural rubber-alumina nanoparticles composites.  - european journal of scientific research.  24(4):538-547. 

m.j. ghazali, j.a. ghani, m.z. omar.  (2007).  plastic deformation characteristics of worn precipitation-hardened aluminium alloys.  - international journal of mechanical & materials engineering.  2(2):125-129. 

r. fadhila, a.g. jaharah, m.z. omar, c.h.c. haron, m.j. ghazali, and c. h. azhari.  (2007).  austenite formation of steel-3401 subjected to rapid cooling process.  - int. j of mech and material.  2(2):150-153.