Penerbitan SCOPUS/ERA

hind azeez mohammed hussein, rozli zulkifli, wan mohd faizal wan mahmood, raheem k. ajeel.  (2022).  effects of design parameters on flow fields and heat transfer characteristics in semicircle oblique finned corrugated.  - international communications in heat and mass transfer.  1-20. 

fatin farhanah zulkurnai, wan mohd faizal wan mahmood, norhidayah mat taib, mohd radzi abu mansor.  (2021).  simulation of combustion process of diesel and ethanol fuel in reactivity controlled compression ignition engine.  - cfd letters.  1-11. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2021).  cngdi engine performance using a vaned diffuser turbocharger compressor with varying injection timings.  - evergreen joint journal of novel carbon resource sciences & green asia strategy.  414-420. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2021).  combustion characteristics of hydrogen in a noble gas compression ignition engine.  - energy reports.  200-218. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2020).  simulation of hydrogen fuel combustion in neon-oxygen compression ignition engine.  - cfd letters.  1-16. 

muhammad asyraf mohd azmi, wan mohd faizal wan mahmood, jaharah a. ghani, mohammad rasidi mohammad rasani.  (2020).  a review of surface texturing in internal combustion engine piston assembly.  - international journal of integrated engineering.  146-163. 

javad zareei, abbas rohani, wan mohd faizal bin wan mahmood, shahrir abdullah.  (2020).  effect of ignition timing and hydrogen fraction in natural gas blend on performance and exhaust emissions in a di engine.  - iranian journal of science and technology, transactions of mechanical engineering.  737-747. 

raden achmad chairdino leuveano, mohd nizam ab rahman, wan mohd faizal wan mahmood and chairul saleh.  (2019).  integrated vendor buyer lot sizing model with transportation and quality improvement consideration under just in time problem.  - mathematics.  944-969. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2019).  modification of a direct injection diesel engine in improving the ignitability and emissions of diesel-ethanol-palm oil methyl ester blends.  - energies.  1-21. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood, mohammad rasidi mohammad rasani,.  (2019).  computational fluid dynamic study on the tribological performance of dimple-textured surface fabricated using the turning process.  - industrial lubrication and tribology.  594-602. 

alias jedi, noorhelyna razali, wan mohd faizal wan mahmood, nor ashikin abu bakar.  (2019).  statistical criteria of nanofluid flows over a stretching sheet with the effects of magnetic field and viscous dissipation.  - symmetry.  1-17. 

j.a. ghani, m.n.a.m. dali, h.a. rahman, c.h.c. haron, w.m.f. wan mahmood,m.r.m. rasani, m.z. nuawi.  (2019).  analysis of dimple structure fabricated using turning process and subsequent reduction in friction.  - wear.  1280-1285. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2019).  study on soot mass fraction and size distribution in a direct injection diesel engine using particulate size mimic soot model.  - journal of thermal science and engineering applications. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood, nik rosli abdullah.  (2018).  combustion characteristics of a direct injection diesel engine fueled with diesel-ethanol-palm oil methyl ester blends.  - international journal of engineering & technology. 

muhammad asyraf mohd azmi, mohd radzi abu mansor, wan mohd faizal wan mahmood, taib iskandar mohamad.  (2018).  numerical study of the effect of injection strategy and compression ratio on gasoline/diesel fueled rcci engine.  - sae technical papers. 

javad zareei, abbas rohani, wan mohd faizal wan mahmood.  (2018).  simulation of a hydrogen/natural gas engine and modelling of engine operating parameters.  - international journal of hydrogen energy. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood, nik rosli abdullah.  (2018).  simulation of injection development of diesel-ethanol-palm oil methyl ester blend in direct injection diesel engine.  - journal of mechanical engineering. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor, rizalman mamat, azri alias.  (2018).  investigation of the pressure ratio and efficiency of a turbocharger centrifugal compressor with a vaned diffuser.  - world review of science, technology and sustainable development. 

eslam r. lotfy, wan mohd. faizal wan mahmood, rozli zulkifli dan zambri harun.  (2018).  cfd simulation of automotive pollutant dispersion in high-rise building urban environment under deeply stable atmospheric condition.  - international journal of engineering and technology (uae). 

norhidayah mat taib; mohd radzi abu mansor; wan mohd faizal wan mahmood; nik rosli abdullah.  (2018).  simulation study of combustion characteristics of diesel- ethanol-palm oil methyl ester blends in diesel engine.  - journal of advanced research in fluid mechanics and thermal sciences. 

mohammad rasidi rasani, azhari shamsudeen, zambri harun, wan mohd faizal wan mahmood.  (2018).  a computational aerodynamic study of tandem rotating wheels in contact with the ground.  - international journal of engineering & technology. 

nik muhammad hafiz, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2018).  simulation of the combustion process for a ci hydrogen engine in an argon-oxygen atmosphere.  - international journal of hydrogen energy. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood.  (2018).  a brief review on friction reduction via dimple structure for piston engine.  - world review of science, technology and sustainable development. 

m. a. zuber, w. m. f. wan mahmood, z. harun, z. z. abidin.  (2018).  soot particle size distribution near the cylinder wall in a direct injection diesel engine.  - journal of engineering science and technology. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2017).  comparison of simple and detailed soot models in the study of soot formation in a compression ignition diesel engine.  - sae international.  1-9. 

noor atikah abdullah,ramizi mohamed, wan mohd faizal wan mahmood,mohamad hanif md saad.  (2017).  black smoke elimination via pid controlled co-firing technique at palm oil mill.  - international journal of applied engineering research.  8050-8056. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor, rizalman mamat, azri alias.  (2017).  application of taguchi method in optimization of design parameter for turbocharger vaned diffuser.  - industrial lubrication and tribology.  409-413. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor, mohd fadzli bin abdollah, rizalman mamat, azri alias.  (2017).  effect of vaned diffuser on the performance of small turbocharger.  - journal of mechanical engineering.  227-236. 

muhammad afif ariffin, wan mohd faizal wan mahmood, zambri harun, ramizi mohamed.  (2017).  medium-scale gasification of oil palm empty fruit bunch for power generation.  - journal of material cycles and waste management.  1244-1252. 

saad aljamali, shahrir abdullah, wan mohd faizal wan mahmood, yusoff ali.  (2016).  comparative analysis of performance and emission of a homogenous combustion compressed natural-gas direct injection engine.  - international journal of mechanical & mechatronics engineering.  173-183. 

saad aljamali, shahrir abdullah, wan mohd faizal wan mahmood, yusoff ali.  (2016).  the effect of injection timings on performance and emissions of compressed natural-gas direct injection engine.  - journal of combustion.  1-7. 

muhammad afif ariffin, wan mohd faizal wan mahmood, ramizi mohamed, mohd tusirin mohd nor.  (2016).  performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier.  - international journal of green energy.  513-520. 

nik muhammad hafiz, mohd radzi abu mansor, wan mohd faizal wan mahmood, fadzli ibrahim, shahrir abdullah, kamaruzzaman sopian.  (2016).  numerical study of hydrogen fuel combustion in compression ignition engine under argon-oxygen atmosphere.  - jurnal teknologi.  77-83. 

zambri harun, wan aizon w. ghopa, shahrir abdullah, m. izhar ghazali, ashraf amer abbas, mohd rasidi rasani, rozli zulkifli, wan mohd faizal wan mahmood, mohd radzi abu mansor, zulkhairi zainol abidin.  (2016).  the development of a multi purpose wind tunnel.  - jurnal teknologi.  63-70. 

mohd nizam ab rahman, raden achmad chairdino leuveano, fairul azni bin jafar, chairul saleh, baba md deros, wan mohd faizal wan mahmood, wan hasrulnizzam wan mahmood.  (2016).  incorporating logistic costs into a single vendor buyer jels model.  - applied mathematical modelling.  10809-10819. 

saad aljamali, shahrir abdullah, wan mohd faizal wan mahmood, yusoff ali.  (2016).  effect of fuel injection timings on performance and emissions of stratified combustion cngdi engine.  - applied thermal engineering.  619-629. 

f. ibrahim, w.m.f. wan mahmood, s. abdullah and m.r. abu mansor.  (2016).  numerical investigation of soot mass concentration in compression ignition diesel engine.  - journal of mechanical engineering and sciences (jmes).  2275-2287. 

nik muhammad hafiz, mohd radzi abu mansor, wan mohd faizal wan mahmood, masahiro shioji.  (2016).  simulation of the effect of initial temperature and fuel injection pressure on hydrogen combustion characteristics in argon-oxygen compression ignition engine.  - sae technical papers.  1-8. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2016).  soot particle measurement in engine cylinder: a review.  - jurnal teknologi.  187-195. 

zakaria jusoh, wan mohd faizal wan mahmood, mohd radzi abu mansor.  (2016).  performance of solar-assisted absorption cycle air conditioning system.  - jurnal teknologi.  121-126. 

adnan kadhim rashid, mohd radzi abu mansor, w ghopa wan aizon, zambri harun, wan mohd faizal wan mahmood.  (2016).  an experimental study of the performance and emissions of spark ignition gasoline engine.  - international journal of automotive and mechanical engineering.  3540-3554. 

m. siba, w. wanmahmood, m. zaki nuawi, r. rasani, m. nassir.  (2016).  flow-induced vibration in pipes: challenges and solutions - a review.  - journal of engineering science and technology.  362-382. 

mohd radzi abu mansor; tan chun hyiin; nik muhammad hafiz; wan mohd faizal wan mahmood; w ghopa wan aizon; shahrir abdullah.  (2015).  fundamental study on combustion characteristics of direct injection gaseous fuel.  - arpn journal of engineering and applied sciences.  7375-7379. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

mohamed a. siba, wan mohd faizal wan mahmood, mohd z. nuawi, rasidi rasani, and mohamed h. nassir.  (2015).  modeling and applications of 3d flow in orifice plate at low turbulent reynolds numbers.  - international journal of mechanical and mechatronics engineering.  19-25. 

md ishak n.a.i., raman i.a., yarmo m.a., wan mahmood w.m.f..  (2015).  ternary phase behavior of water microemulsified diesel-palm biodiesel.  - frontiers in energy.  162-169. 

z. harun, h. hashim, n. saibani, w. m. f. wan mahmood.  (2015).  effectiveness of teaching technics in sustainability topics.  - journal of engineering science and technology.  61-67. 

w. m. f. w. mahmood, m. a. ariffin, z. harun, n. a. i. md. ishak, j. a. ghani, m. n. ab. rahman.  (2015).  characterisation and potential use of biochar from gasified oil palm wastes.  - journal of engineering science and technology.  45-54. 

mohamed a. siba, wan mohd faizal wan mahmood, mohd z. nuawi, rasidi rasani, and mohamed h. nassir.  (2015).  wall pressure due to turbulent flow through orifice plate.  - international journal of mechanical & mechatronics engineering.  36-41. 

muhammad ahmar zuber, wan mohd faizal wan mahmood, zambri harun, zulkhairi zainol abidin.  (2015).  soot particle evolution and transport in a direct injection diesel engine.  - jurnal teknologi.  85-88. 

hyder h. balla, shahrir abdullah, wan mahmood wan mohd faizal, rozli zulkifli, kamaruzaman sopian.  (2015).  enhancement of heat transfer coefficient multi-metallic nanofluid with anfis modeling for thermophysical properties.  - thermal science.  1613-1620. 

nizaroyani saibani,muhammad idham sabtu,zambri harun, wan mohamad faizal wan mahmood,norhamidi muhamad dan jaafar sahari.  (2015).  comparison of emotional intelligence scores among engineering students of an academic programme.  - journal of engineering science and technology.  41-51. 

zuber m.a., wan mahmood w.m.f., harun z., zainol abidin z., la rocca a., shayler p., bonatesta f..  (2015).  modeling of in-cylinder soot particle size evolution and distribution in a direct injection diesel engine.  - sae technical papers. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2015).  a review of soot particle measurement in lubricating oil.  - defense s&t technical bulletin.  141-152. 

muhammad afif ariffin, wan mohd faizal wan mahmood, ramizi mohamed, mohd tusirin mohd nor.  (2015).  performance of oil palm frond gasification using medium-scale downdraft gasification for electricity generation.  - iet renewable power generation.  228-235. 

hastinatun mukayat, ismail ab. raman, khairiah badri, wan mohd faizal wan mahmood and suria ramli.  (2015).  the influence of water in water-microemulsified-diesel and its impact on fuel properties and engine performance.  - the malaysian journal of analytical sciences.  251-260. 

javad zareei, faizal wan mahmood, shahrir abdullah, yusoff ali, taib iskandar mohamed.  (2014).  prediction of performance a direct injection engine fueled with natural gas-hydrogen blends.  - international journal of mechanical and mechatronics engineering.  14(2):1-8. 

afida ayob, wan mohd faizal wan mahmood, azah mohamed, mohd zamri che wanik, mohd fadzil mohd siam, saharuddin sulaiman, abu hanifah azit, mohamed azrin mohamed ali.  (2014).  review on electric vehicle, battery charger, charging station and standards.  - research journal applied sciences, engineering and technology.  7(2):364-373. 

saad aljamali, wan mohd faizal wan mahmood, shahrir abdullah and yusoff ali.  (2014).  comparison of performance and emission of a gasoline engine fuelled by gasoline and cng under various throttle positions.  - journal of applied sciences.  14(4): 386-390. 

ali nurrakhmad siregar, wan mohd faizal wan mahmod, jaharah a. ghani, che hassan che haron, muhammad rizal.  (2014).  design and analysis of single screw extruder for jatropha seeds using finite element method.  - research journal of applied sciences, engineering and technology.  7(10):2098-2105. 

javad zareei, wan mohd faizal wan mahmood, shahrir abdullah, yusoff ali.  (2014).  effect of hydrogen on natural gas fueled direct injection engine, a theoretical study.  - australian journal of basic and applied sciences.  8-13. 

l. h. jawad, s. abdullah, r. zulkifli, w. m. f. w. mahmood.  (2014).  numerical study on the effect of interaction vaned diffuser with impeller on the performance of a modified centrifugal compressor.  - journal of mechanics.  30(2): 113-122. 

muhammad a. zuber, wan mohd f. wan mahmood, zulkhairi zainol abidin and zambri harun.  (2014).  in-cylinder soot particle distribution in squish region of a direct injection diesel engine.  - international journal of mechanical & mechatronics engineering.  8. 

mohd radzi abu mansor, nor afzanizam samiran, wan mohd faizal wan mahmood, raja nazatul akhma.  (2014).  effect of injector nozzle design on spray characteristics for hydrogen direct injection engine conditions.  - applied mechanics and materials.  406-410. 

zambri harun, mohd faruq abdul latif, mohammad rasidi rasani dan wan mohd faizal wan mahmood.  (2014).  skin friction impacts on fuel consumption.  - international journal of vehicle systems modelling and testing.  281. 

mohd nizam ab. rahman, noor suhana mohd zubir, raden achmad chairdino leuveano, jaharah a. ghani and wan mohd faizal wan mahmood.  (2014).  reliability study of solder paste alloy for the improvement of solder joint at surface mount fine-pitch components.  - materials.  7706-7721. 

muhammad afif ariffin, wan mohd faizal wan mahmood, mohd tusirin mohd nor, ramizi mohamed.  (2014).  potential of oil palm empty fruit bunch (efb) biochar from gasification process.  - australian journal of basic and applied sciences.  149-152. 

m.h hanafi, w.m.f wan mahmood, a. roslizar, m.s zakaria, m.n.a saadun and s.a. rafeq.  (2013).  analysis of soot particle movement in diesel engine under the influence of drag force.  - applied mechanics and materials.  275-280. 

hyder h. balla, shahrir abdullah, wan mohd faizal wan mahmood, m. abdul razzaq, rozli zulkifli, kamaruzaman sopian.  (2013).  modelling and measuring the thermal conductivity of multi-metallic zn/cu nanofluid.  - research on chemical intermediates.  39(6):2801-2815. 

layth h. jawad, s. abdullah, r. zulkifli, and w.m.f.w. mahmood.  (2013).  numerical investigation on the effect of impeller trimming on the performance of a modified compressor.  - cfd letters.  5(4):174-178. 

hyder h. balla, shahrir abdullah, wan mohd faizal wan mahmood, rozli zulkifli, kamaruzaman sopian.  (2013).  numerical study of the enhancement of heat transfer for hybrid cuo-cu nanofluids flowing in a circular pipe.  - journal of oleo science.  62(7):533-539. 

hyder h. balla, shahrir abdullah, emad a. jaffar al-mulla, wan mohd faizal wan mahmood, rozli zulkifli, kamaruzaman sopian.  (2013).  effect of reynolds number on heat transfer and flow for multi-oxide nanofluids using numerical simulation.  - research on chemical intermediates.  39(5):2197-2210. 

jawad, l.h., abdullah, s., zulkifli, r., mahmood, w.m.f.w..  (2012).  modelling of centrifugal compressor impellers using adaptive neuro- fuzzy inference systems (anfis).  - international review of mechanical engineering.  6(5):1011-1017. 

jawad, l.h., abdullah, s., zulkifli, r., mahmood, w.m.f.w..  (2012).  prediction of centrifugal compressor performance by using adaptive neuro-fuzzy inference system (anfis).  - international review on modelling and simulations.  5(4):1580-1587. 

hyder h. balla, shahrir abdullah, rozli zulkifli, wan mohd faizal and kamaruzzaman sopian.  (2012).  effect of oxides nanoparticle materials on the pressure loss and heat transfer of nanofluids in circular pipes.  - journal of applied sciences.  12(13):1396-1401. 

a.f.a. rasid, t.i. mohamad, m.j. ghazali and w.m.f.w. mahmood.  (2012).  effects of lubricant temperature in a motorized engine.  - world applied sciences journal.  927-930. 

layth h. jawad, s. abdullah, r. zulkifli and w.m.f.w. mahmood.  (2012).  numerical simulation of flow inside a modified turbocharger centrifugal compressor.  - asian journal of applied sciences.  5(8):563-572.