amro h. altoyuri, junaidi syarif, zainuddin sajuri.  (2022).  deformation behavior of single-crystal magnesium during nano-ecap simulation.  - heliyon.  1-10. 

amir hossein baghdadi, zainuddin sajuri, azadeh keshtgar, nurulakmal mohd sharif and armin rajabi.  (2022).  mechanical property improvement in dissimilar friction stir welded al5083/al6061 joints: effects of post-weld heat treatment and abnormal grain growth.  - materials.  1-14. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, junaidi syarif, intan fadhlina mohamed and ahmad muhammad aziz.  (2022).  effects of build orientations on microstructure evolution, porosity formation, and mechanical performance of selective laser melted 17-4 ph stainless steel.  - metals.  1-24. 

armin rajabi, peter hodgson, mariyam j. ghazali, zainuddin sajuri, alireza almaslow, hamid ahmad mehrabi, amir hossein baghdadi.  (2022).  challenges and solutions in the synthesis of nano-ticn: a review.  - ceramic international.  8921-8929. 

faridzah jamaluddin,nizaroyani saibani ,siti maisarah mohd pisal ,dzuraidah abd wahab,hawa hishamuddin ,zainuddin sajuri, rasyikah md khalid.  (2022).  end-of-life vehicle management systems in major automotive production bases in southeast asia: a review.  - sustainability.  1-23. 

a.m. aziz, m.z. omar, z. sajuri.  (2021).  strength of thixoformed a319 alloy at elevated temperature.  - metals and materials international.  2416-2429. 

n.a. alang, j. alias, z. sajuri, s. nur atiqah.  (2021).  finite element modelling of creep rupture on grade 91 steel using monkman-grant ductility based damage model.  - international journal of integrated engineering.  108-118. 

amirhossein mashhuriazar, c. hakan gur, zainuddin sajuri, hamid omidvar.  (2021).  effects of heat input on metallurgical behavior in haz of multi-pass and multi-layer welded in-939 superalloy.  - journal of materials research & technology.  1590-1603. 

ali ebrahimzadeh pilehrood, amirhossein mashhuriazar, amir hossein baghdadi, zainuddin sajuri, and hamid omidvar.  (2021).  effect of laser metal deposition parameters on the characteristics of stellite 6 deposited layers on precipitation-hardened stainless steel.  - materials.  1-14. 

lyu yao, yu lih jiun, khairiah haji badri, zuliani zulkoffli, zainuddin sajuri, muhammad zhafarin firdaus zulkefly, mouad a. tarawneh.  (2020).  characterization of biomass-reinforced biopolyol-based polyurethane foams.  - international journal of nanoelectronics and materials.  95-106. 

m. a. m. arif, m. z. omar, z. sajuri, m. s. salleh.  (2020).  effects of cu and mg on thixoformability and mechanical properties of aluminium alloy 2014.  - transactions of nonferrous metals society of china.  275-287. 

ali ebrahimzadeh pilehrood, hamid omidvar, ali shamsipur, zainuddin sajuri.  (2020).  influence of transient liquid phase bonding followed by homogenization on the fatigue lifetimes of inconel 738 at elevated temperature.  - journal of manufacturing processes.  348-358. 

zainuddin sajuri, nor fazilah mohamad selamat, amir hossein baghdadi, armin rajabi, mohd zaidi omar, amir hossein kokabi and junaidi syarif.  (2020).  cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded aa5083.  - metals.  1-16. 

davood zamani, azmah hanim mohamed ariff, ghasem dini, zainuddin sajuri and nur ismarrubie zahari.  (2020).  tensile properties and microstructure of fe-17mn-2al-0.6c twip steel.  - malaysian journal of microscopy.  56-65. 

n.f.m. selamat, a.h. baghdadi, z. sajuri, s. junaidi and a.h. kokabi.  (2020).  rolling effect on dissimilar friction stir welded aa5083-aa6061 aluminium alloy joints.  - journal of advanced manufacturing technology.  49-61. 

amirhossein mashhuriazar, hamid omidvar, c. hakan gur, zainuddin sajuri.  (2020).  effect of welding parameters on the liquation cracking behavior of high-chromium ni-based superalloy.  - journal of materials engineering and performance.  7843-7852. 

junaidi syarif, mohammad h. yousuf, zainuddin sajuri, amir hossein baghdadi, mahdi merabtene and mohd zaidi omar.  (2020).  effect of partial solution treatment temperature on microstructure and tensile properties of 440c martensitic stainless steel.  - metals.  1-14. 

amir hossein baghdadi, zainuddin sajuri, mohd zaidi omar and armin rajabi.  (2020).  friction stir welding parameters: impact of abnormal grain growth during post weld heat treatment on mechanical properties of al-mg-si welded joints.  - metals.  1-18. 

amirhossein mashhuriazar, hamid omidvar, zainuddin sajuri, c. hakan gur and amir hossein baghdadi.  (2020).  effects of pre-weld heat treatment and heat input on metallurgical and mechanical behaviour in haz of multi-pass welded in-939 superalloy.  - metals.  1-17. 

fadzilah adnan, zainuddin sajuri, amir hossein baghdadi, mohd zaidi omar.  (2020).  effects of rapid heating and uniaxial loading on the phase transformation and mechanical properties of direct partial remelted butt joint of aisi d2 tool steel.  - materials science & engineering a.  1-12. 

m.n. mohammed, m.z. omar, z. sajuri, and salah al-zubaidi.  (2020).  characterization of metallurgical and mechanical properties of thixowelded aisi d2 and aisi 304 steels.  - journal of materials engineering and performance.  739-749. 

m.a.m arif, m.z. omar & z. sajuri.  (2020).  kebolehbentukan-tikso aloi 2014 dengan penambahan si dan pengurangan cu.  - sains malaysiana.  179-188. 

amir hossein baghdadi, zainuddin sajuri, nor fazilah mohamad selamat, mohd zaidi omar, yukio miyashita, and amir hossein kokabi.  (2019).  effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of mg and al alloys.  - international journal of minerals, metallurgy and materials.  1285-1298. 

amir hossein baghdadi, armin rajabi, nor fazilah mohamad selamat, zainuddin sajuri, mohd zaidi omar.  (2019).  effect of post-weld heat treatment on the mechanical behavior and dislocation density of friction stir welded al6061.  - materials science & engineering a.  728-734. 

fadzilah adnan, zainuddin sajuri, mohd zaidi omar.  (2019).  effect of uniaxial load on microstructure and mechanical properties of thixo-joint aisi d2 tool steel.  - journal of mechanical engineering and sciences.  5006-5020. 

nora osman, zainuddin sajuri, amir hossein baghdadi and mohd zaidi omar.  (2019).  effect of process parameters on interfacial bonding properties of aluminium copper clad sheet processed by multi-pass friction stir welding technique.  - metals.  1-19. 

nor fazilah mohd selamata, amir hossein baghdadi, zainuddin sajuri, amir hossein kokabi.  (2019).  weldability and mechanical properties of dissimilar al-mgsi to pure aluminium and al-mg using friction stir welding process.  - jurnal teknologi.  143-149. 

junaidi syarif, nofriady handra, zainuddin sajuri, mohd zaidi omar.  (2018).  change in tensile properties of dual-phase steels by cu addition.  - transactions of the indian institute of metals.  513-519. 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri and wan fathul hakim wan zamri.  (2018).  investigation of low-velocity impact and flexural loading on ar500 steel/aa7075 aluminum alloy brazed joint.  - songklanakarin journal of science and technology.  . 

nora osman, zainuddin sajuri and mohd zaidi omar.  (2018).  multi-pass friction stirred clad welding of dissimilar joined aa6061 aluminium alloy and brass.  - journal of mechanical engineering and sciences.  4285-4299. 

ukwueze, bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2018).  solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia.  - international journal of mechanical & mechatronics engineering.  . 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, wan fathul hakim zamri, mohd zaidi omar and zainuddin sajuri.  (2018).  experimental and numerical investigation on the layering configuration effect to the laminated aluminium/steel panel subjected to high speed impact test.  - metals.  . 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri, wan fathul hakim wan zamri and mohd faizal abdullah.  (2018).  brazed joint interface bonding strength of ar500 steel and aa7075 aluminium alloy.  - metals.  . 

m.f. abdullah, s. abdullah, m.z. omar, z. sajuri & m.s. risby.  (2018).  observing the behaviour of reinforced magnesium alloy with carbon-nanotube and lead under 976 m/s projectile impact.  - journal of mechanical engineering.  . 

amir hossein baghdadi, nor fazilah mohamad selamat, zainuddin sajuri and amir hossein kokabi.  (2018).  effect of travel speed on quality and welding efficiency of friction stir welded az31b magnesium alloy.  - international journal of engineering & technology.  94-99. 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, mohd zaidi omar, zainuddin sajuri, wan fathul hakim zamri.  (2018).  ballistic limit of laminated panels with different joining materials subjected to steel-hardened core projectile.  - international journal of integrated engineering.  . 

hend ali omar, nur izzi md. yusoff, halil ceylan, irman abdul rahman, zainuddin sajuri, fauzan mohd jakarni, amiruddin ismail.  (2018).  determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods.  - construction and building materials.  391-402. 

fadzilah adnan, zainuddin sajuri and zaidi omar.  (2018).  a study of microstructural evolution of aisi d2 tool steel during direct partial remelting method.  - international journal of mechanical engineering and robotics research.  689-693. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2017).  the characterization and rheological investigation of materials for powder injection molding.  - journal of mechanical engineering.  97-107. 

j. a. wahab,m. j. ghazali, z. sajuri, y. otsuka, m. jayaprakash, s. nakamura, a. f. s. baharin.  (2017).  effects of micro-grooves on tribological behaviour of plasma-sprayed alumina-13%titania coatings.  - ceramic international.  6410-6416. 

n.a. rahman, m.f. abdullah, s. abdullah, w.f.h. zamri, m.z. omar, z. sajuri.  (2017).  characterising ballistic limits of lightweight laminated-structure as a protective panel for armoured vehicle.  - journal of mechanical engineering.  20-34. 

w. n. m. jamil, z. sajuri, s. abdullah, m. a. aripin, m. z. omar, m.f. abdullah, w. f. h. zamri.  (2017).  effect of steel fibres and wire mesh reinforcement on flexural strength and strain energy steel-epoxy-aluminium composite laminates.  - journal of mechanical engineering.  10-20. 

zambri harun, nizaroyani saibani, mohd rasidi rasani, zainuddin sajuri.  (2017).  how realistic are the eac measurements?.  - journal of engineering science and technology.  58-66. 

ammar adil al-bakri, zainuddin sajuri, ahmad kamal ariffin, mohammed abdul razzaq and mohd salehudin fafmin.  (2017).  fatigue properties of strained thin 304 stainless steel sheets.  - international journal of automotive and mechanical engineering.  4171-4182. 

m. n. muhamed, m. z. omar, s. abdullah , z. sajuri, w. f. h. w. zamri.  (2017).  the effect of surface texture on the joint shear strength of ar500 steel and aa7075.  - journal of mechanical engineering.  . 

j. a. wahab, m. j. ghazali, w. m. w. yusoff and z. sajuri.  (2016).  enhancing material performance through laser surface texturing: a review.  - transactions of the imf.  193-198. 

hend ali omar, nur izzi md. yusoff, halil ceylan, zainuddin sajuri, fauzan mohd jakarni, amiruddin ismail.  (2016).  investigation of the relationship between fluidity and adhesion strength of unmodified and modified bitumens using the pull-off test method.  - construction and building materials.  140-148. 

ahmad muhammad aziz, mohd zaidi omar, zainuddin sajuri and mohd shukor salleh.  (2016).  microstructural morphology of rheocast a319 aluminium alloy.  - advances in mechanical engineering.  1-10. 

abdullah m.f., abdullah s., omar m.z., sajuri z., sohaimi r.m..  (2016).  fatigue life of the magnesium alloy az31b under specific spectrum loading.  - materialpruefung/materials testing.  200-205. 

rahman n.a., abdullah s., zamri w.f.h., abdullah m.f., omar m.z., sajuri z..  (2016).  ballistic limit of high-strength steel and al7075-t6 multi-layered plates under 7.62-mm armour piercing projectile impact.  - latin american journal of solids and structures.  1658-1676. 

aripin m.a., sajuri z., abdullah s., omar m.z., zamri w.f.h., jamil w.n.m., abdullah m.f..  (2016).  microscale groove effect on shear strength of epoxy-bonded dissimilar metal plate.  - journal of adhesion science and technology.  2001-2012. 

aziz a.m., omar m.z., sajuri z., salleh m.s..  (2016).  microstructural changes of aluminium alloy a319 on cooling slope plate.  - jurnal teknologi.  121-127. 

n.f.m. selamat, a.h. baghdadi, z. sajuri and a.h. kokabi.  (2016).  friction stir welding of similar and dissimilar aluminium alloys for automotive applications.  - international journal of automotive and mechanical engineering (ijame).  3401-3412. 

hend ali omar, nur izzi md. yusoff, zainuddin sajuri, halil ceylan, fauzan mohd jakarni and amiruddin ismail.  (2016).  determining the effects of ageing on halloysite nano-tube modified binders through the pull-off test method.  - construction and building materials.  245-252. 

muhamed m.n., omar m.z., abdullah s., sajuri z., zamri w.f.h., rahman m.a.i.a., abdullah m.f..  (2016).  investigation on brazing interface bonding characteristic of aa7075 and aa6061 aluminum alloy with ar500 steel using al-si-zn filler metal.  - jurnal teknologi.  129-135. 

w.n.m. jamil, m.a. aripin, z. sajuri, s. abdullah, m.z. omar, m.f. abdullah and w.f.h. zamri.  (2016).  mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles.  - international journal of automotive and mechanical engineering.  3742-3753. 

al-bakri a.a., sajuri z., ariffin a.k., razzaq m.a., fafmin m.s..  (2016).  tensile and fracture behaviour of very thin 304 stainless steel sheet.  - jurnal teknologi.  45-50. 

rahman m.a.i.a., omar m.z., abdullah s., sajuri z., zamri w.f.h., muhamed m.n., abdullah m.f..  (2016).  effects of wetting time on properties of steel-aluminium brazed joint.  - jurnal teknologi.  51-55. 

latif n.a., sajuri z., syarif j., miyashita y..  (2016).  effect of loading rate on fracture behaviour of mg-al-zn alloys.  - jurnal teknologi.  83-89. 

m. n. mohammed, m. z. omar, z. sajuri, m. s. salleh and k. s. alhawari.  (2015).  trend and development of semisolid metal joining processing.  - advances in materials science and engineering.  1-13. 

mohamad faizal abdullah, shahrum abdullah, mohd zaidi omar, zainuddin sajuri and risby mohd sohaimi.  (2015).  failure observation of the az31bmagnesium alloy and the effect of leadaddition content under ballistic impact.  - advances in mechanical engineering.  1-13. 

noradila abdul latif, zainuddin sajuri, junaidi syarif, yukio miyashita and yoshiharu mutoh.  (2014).  effect of strain rate on tensile and work hardening properties for al-zn magnesium alloys.  - international journal of materials engineering innovation.  5(1): 28-37. 

j. syarif, t.n. rohmannudin, m.z. omar, z. sajuri, s. harjanto.  (2013).  stability of the beta phase in ti-mo-cr alloy fabricated by powder metallurgy.  - journal of mining and metallurgy,section b:metallurg.  49(3)B:285-292. 

junaidi syarif, eko kurniawan, zainuddin sajuri & mohd zaidi omar.  (2013).  influence of iron on phase stability and corrosion resistance of ti-15%cr alloy.  - sains malaysiana.  42(12):1775-178. 

m. n. mohammed, m. z. omar, j. syarif, z. sajuri, m. s. salleh, and k. s. alhawari.  (2013).  microstructural evolution during dprm process of semisolid ledeburitic d2 tool steel.  - scientific world journal.  2013:Article ID 828926. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

junaidi syarif, agung iswadi, mariyam jameelah ghazali, zainuddin sajuri, mohd zaidi omar.  (2013).  wear behavior of copper-containing ferritic iron under a dry sliding condition.  - journal of zhejiang university - science a.  14(14):906-914. 

salih a.a., omar m.z., syarif j., sajuri z..  (2012).  an investigation on the microstructure and mechanical properties of quenched and tempered ss440c martensitic stainless steel.  - international journal of mechanical and materials engineering.  7(2):119-123. 

o. bapokutty, z. sajuri and j. syarif.  (2012).  stress relaxation behavior of heat treated inconel 718.  - journal of applied sciences.  12(9):870-875. 

akeel, n.a., sajuri, z., ariffin, a.k..  (2011).  analysis of rolling contact fatigue damage initiation at the wheel-rail interface.  - australian journal of basic and applied sciences.  5(12):937-945. 

wan nur azrina wan muhammad, zainuddin sajuri, yoshiharu mutoh, yukio miyashita.  (2011).  microstructure and mechanical properties of magnesium composites prepared by spark plasma sintering technology.  - journal of alloys and compounds.  509(20):6021-6029. 

abdul razzaq m., ariffin a.k., al-shafie a., abdullah s., sajuri z., kadhim n.a..  (2011).  fatigue life modelling under constant amplitude loading using adaptive neuro - fuzzy (anfis) application.  - australian journal of basic and applied sciences.  5(8):1194-1204. 

salih, a.a., omar, m.z., junaidi, s., sajuri, z..  (2011).  effect of different heat treatment on the ss440c martensitic stainless steel.  - australian journal of basic and applied sciences.  5(12):867-871. 

alfan, a., omar, m.z., syarif, j., sajuri, z..  (2010).  direct partial remelting of xw-42 steel in semi-solid zone.  - journal of applied sciences.  10(13),1255-1262. 

m.a.m. daud, z. sajuri, j. syarif, m.z. omar.  (2010).  effect of solution treatment on fatigue crack propagation behaviour of magnesium alloy.  - international review of mechanical engineering (ireme).  4(3):238-243. 

junaidi syarif & zainuddin sajuri.  (2010).  effect of copper addition on grain refinement of austenite in fe-8wt.%ni-(0-3)wt.%cu alloy.  - sains malaysiana.  39(6)(2010): 999?1006. 

m. a. m. daud , m. z. omar, j. sharif and z. sajuri.  (2009).  effect of solution treatment on fatigue properties of magnesium alloy.  - international journal of mechanical and materials engineering (ijmme).  4(2):204-207. 

z. zulkoffli, j. syarif and z. sajuri.  (2009).  fabrication of az61/sic composites by powder metallurgy process.  - international journal of mechanical and materials engineering (ijmme).  4(2):156-159. 

t.n.rohmannudin. j.syarif, m.z.omar, z,sajuri & a.r.daud.  (2009).  changes in phase stability on ti-10at.% mo alloy by alloying elements.  - international journal of mechanical and materials engineering.  4(2):172-175. 

mutoh y., bhuiyan md.s., sajuri z..  (2008).  high cycle fatigue behavior of magnesium alloys under corrosive environment.  - key engineering materials.  378-379:131-146. 

sabrina alam khan, yukio miyashita, yoshiharu mutoh, zainuddin bin sajuri.  (2006).  influence of mn content on mechanical properties and fatigue behavior of extruded mg alloys.  - materials science and engineering a.  A 420: 315-321. 

zainuddin bin sajuri, yukio miyashita, yasunobu hosokai, yoshiharu mutoh.  (2006).  effects of mn content and texture on fatigue properties of as-cast and extruded az61 magnesium alloys.  - international journal of mechanical sciences.  48: 198-209.