nuramilawahida mat ropi, hawa hishamuddin, dzuraidah abd wahab, wakhid ahmad jauhari, fatin amrina a. rashid, nor kamaliana khamis, intan fadhlina mohamed, mohd anas mohd sabri, mohd radzi abu mansor.  (2023).  optimal lot-sizing decisions for a remanufacturing production system under spare parts supply disruption.  - mathematics.  4053-4072. 

mohamad qayyum mohd tamam; wira jazair yahya; ahmad muhsin ithnin; nik rosli abdullah; hasannuddin abdul kadir; md mujibur rahman; hasbullah abdul rahman; mohd radzi abu mansor; hirofumi noge.  (2023).  performance and emission studies of a common rail turbocharged diesel electric generator fuueled with emulsifier free water/diesel emulsion.  - energy.  1-13. 

norhidayah mat taib, wan mohd faizal wan mahmood, wan aizon w. ghopa, hasan köten, mohd radzi abu mansor.  (2023).  numerical study of heat transfer of hydrogen combustion in noble gases atmosphere in compression ignition engine.  - international journal of hydrogen energy.  28970-28979. 

zambri harun, altaf hossain molla, mohd radzi abu mansor, rozmi ismail.  (2022).  development, critical evaluation, and proposed framework: end-of-life vehicle recycling in india.  - sustainability.  1-25. 

fatin amrina a. rashid, hawa hishamuddin, nizaroyani saibani, mohd radzi abu mansor dan zambri harun.  (2022).  a review of supply chain uncertainty management in the end-of-life vehicle industry.  - sustainability.  1-28. 

muhammad imran sadiq, wan aizon w. ghopa, mohd. zaki nuawi, mohammad rasidi rasani, nor kamaliana khamis, mohd radzi abu mansor.  (2022).  investigation of stiffness and damping coefficients in fluid film bearing with bio oils and mineral based oil.  - energy report.  419-429. 

pengfei zhu; jing yao; zhen wu; si-min huang; mohd radzi abu mansor; fusheng yang; zaoxiao zhang.  (2022).  construction of a transient multi-physics model of solid oxide fuel cell fed by biomass syngas considering the carbon deposition and temperature effect.  - chemical engineering journal.  1-19. 

nur syahirah m.hanafi, wan aizon w.ghopa, rozli zulkifli, shahrir abdullah, zambri harun, mohd radzi abumansor.  (2022).  numerical simulation on the effectiveness of hybrid nanofluid in jet impingement cooling application.  - energy report.  764-775. 

norhidayah mat taib, wan mohd faizal wan mahmood, mohd radzi abu mansor.  (2022).  combustion characteristics of hydrogen direct injection in a helium-oxygen compression ignition engine.  - energy reports.  494-511. 

zul ilham, indrani subramaniam, adi ainurzaman jamaludin, wan abd al qadr imad wan-mohtar, sarina abdul halim-lim, hideaki ohgaki, keiichi ishihara, mohd radzi abu mansor.  (2022).  analysing dimensions and indicators to design energy education framework in malaysia using the analytic hierarchy process (ahp).  - energy reports.  1013-1024. 

mohd radzi abu mansor, katsutaka nakagami, yuta kondo, masahiro shioji.  (2022).  study of heat loss mechanism in argon-circulated hydrogen engine combustion chamber wall surface conditions.  - energy reports.  815-826. 

mohd radzi abu mansor, taib iskandar mohamad, osama sabah.  (2021).  numerical investigation on combustion and emissions in a direct injection compression ignition engine fuelled with various hydrogen-methane-diesel blends at different intake air temperatures.  - energy reports.  403-421. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2021).  combustion characteristics of hydrogen in a noble gas compression ignition engine.  - energy reports.  200-218. 

cheah yi linn, mohd radzi abu mansor, zul ilham.  (2021).  performance and emission of b100 biodiesel with various additives in direct injection diesel engine.  - journal of advanced research in fluid mechanics and thermal sciences.  24-36. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2021).  cngdi engine performance using a vaned diffuser turbocharger compressor with varying injection timings.  - evergreen joint journal of novel carbon resource sciences & green asia strategy.  414-420. 

fatin farhanah zulkurnai, wan mohd faizal wan mahmood, norhidayah mat taib, mohd radzi abu mansor.  (2021).  simulation of combustion process of diesel and ethanol fuel in reactivity controlled compression ignition engine.  - cfd letters.  1-11. 

muhamad syukri abdul khalid, nor kamaliana khamis, mohd radzi abu mansor, azhar hamzah.  (2021).  motorcycle conspicuity issues and intervention: a systematic review.  - iranian journal of public health.  24-34. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2020).  simulation of hydrogen fuel combustion in neon-oxygen compression ignition engine.  - cfd letters.  1-16. 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2019).  modification of a direct injection diesel engine in improving the ignitability and emissions of diesel-ethanol-palm oil methyl ester blends.  - energies.  1-21. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2019).  study on soot mass fraction and size distribution in a direct injection diesel engine using particulate size mimic soot model.  - journal of thermal science and engineering applications.  . 

cheng boon how, norhidayah mat taib, mohd radzi abu mansor.  (2019).  performance and exhaust gas emission of biodiesel fuel with palm oil based additive in direct injection compression ignition engine.  - international journal of automotive and mechanical engineering.  6173-6187. 

mohd hafzi md isa, baba md deros, zulhaidi mohd jawi, khairil anwar abu kassim, mohd radzi abu mansor.  (2018).  acceptance and use of lane change assistance system among early adopters in malaysia.  - malaysian journal of public health medicine.  . 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood, nik rosli abdullah.  (2018).  combustion characteristics of a direct injection diesel engine fueled with diesel-ethanol-palm oil methyl ester blends.  - international journal of engineering & technology.  . 

nik muhammad hafiz, mohd radzi abu mansor, wan mohd faizal wan mahmood.  (2018).  simulation of the combustion process for a ci hydrogen engine in an argon-oxygen atmosphere.  - international journal of hydrogen energy.  . 

norhidayah mat taib, mohd shereen zainuddin, mohd radzi abu mansor, zul ilham.  (2018).  performance and emission opacity of canola and soybean biodiesel fuel in a diesel engine.  - journal of mechanical engineering and sciences.  . 

mohamad faiz paturrahman, mohd radzi abu mansor, zambri harun, mohd anas mohd sabri.  (2018).  study on the modification effect of side pot and diffuser to the aerodynamics of the f1 in schools car.  - international journal of engineering & technology.  . 

muhammad asyraf mohd azmi, mohd radzi abu mansor, wan mohd faizal wan mahmood, taib iskandar mohamad.  (2018).  numerical study of the effect of injection strategy and compression ratio on gasoline/diesel fueled rcci engine.  - sae technical papers.  . 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor, rizalman mamat, azri alias.  (2018).  investigation of the pressure ratio and efficiency of a turbocharger centrifugal compressor with a vaned diffuser.  - world review of science, technology and sustainable development.  . 

norhidayah mat taib; mohd radzi abu mansor; wan mohd faizal wan mahmood; nik rosli abdullah.  (2018).  simulation study of combustion characteristics of diesel- ethanol-palm oil methyl ester blends in diesel engine.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

desmond jayson, norhidayah mat taib, mohd radzi abu mansor, taib iskandar mohamad, zul ilham.  (2018).  performance analysis of a direct injection diesel engine using biodiesel and additives.  - journal of mechanical engineering.  . 

norhidayah mat taib, mohd radzi abu mansor, wan mohd faizal wan mahmood, nik rosli abdullah.  (2018).  simulation of injection development of diesel-ethanol-palm oil methyl ester blend in direct injection diesel engine.  - journal of mechanical engineering.  . 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2017).  comparison of simple and detailed soot models in the study of soot formation in a compression ignition diesel engine.  - sae international.  1-9. 

mohd radzi abu mansor; mahmood merzah abbood; taib iskandar mohamad.  (2017).  the influence of varying hydrogen-methane-diesel mixture ratio on the combustion characteristics and emissions of a direct injection diesel engine.  - fuel.  281-291. 

mohd radzi abu mansor, hoo choon lih, norhidayah mat taib, w. ghopa wan aizon, zul ilham.  (2017).  the effect of increasing the percentage of hydrogen added to methane in direct injection spark ignition engine to the composition of co and co2 emissions.  - arpn journal of engineering and applied sciences.  3145-3150. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor, rizalman mamat, azri alias.  (2017).  application of taguchi method in optimization of design parameter for turbocharger vaned diffuser.  - industrial lubrication and tribology.  409-413. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor, mohd fadzli bin abdollah, rizalman mamat, azri alias.  (2017).  effect of vaned diffuser on the performance of small turbocharger.  - journal of mechanical engineering.  227-236. 

ghufran redzwan; maridah mohd amin; nur nabiha zulkarnain; mohd radzi abu mansor; mohamad suffian mohamad annuar; zul ilham.  (2017).  extrication of biodiesel feedstock from early stage of food waste liquefaction.  - journal of material cycles and waste management.  676-681. 

f. ibrahim, w.m.f. wan mahmood, s. abdullah and m.r. abu mansor.  (2016).  numerical investigation of soot mass concentration in compression ignition diesel engine.  - journal of mechanical engineering and sciences (jmes).  2275-2287. 

zakaria jusoh, wan mohd faizal wan mahmood, mohd radzi abu mansor.  (2016).  performance of solar-assisted absorption cycle air conditioning system.  - jurnal teknologi.  121-126. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2016).  soot particle measurement in engine cylinder: a review.  - jurnal teknologi.  187-195. 

nik muhammad hafiz, mohd radzi abu mansor, wan mohd faizal wan mahmood, masahiro shioji.  (2016).  simulation of the effect of initial temperature and fuel injection pressure on hydrogen combustion characteristics in argon-oxygen compression ignition engine.  - sae technical papers.  1-8. 

zaliha wahid; sallehuddin mohamed haris; nizaroyani saibani; jaharah a. ghani; rozli zulkifli; mohd radzi abu mansor.  (2016).  examination achievement of engineering students from ukm and ude: a comparison.  - pertanika journal of social sciences and humanities.  229-238. 

mohd radzi abu mansor, masahiro shioji.  (2016).  investigation of the combustion process of hydrogen jets under argon-circulated hydrogen-engine conditions.  - combustion and flame.  245-257. 

zambri harun, wan aizon w. ghopa, shahrir abdullah, m. izhar ghazali, ashraf amer abbas, mohd rasidi rasani, rozli zulkifli, wan mohd faizal wan mahmood, mohd radzi abu mansor, zulkhairi zainol abidin.  (2016).  the development of a multi purpose wind tunnel.  - jurnal teknologi.  63-70. 

adnan kadhim rashid, mohd radzi abu mansor, w ghopa wan aizon, zambri harun, wan mohd faizal wan mahmood.  (2016).  an experimental study of the performance and emissions of spark ignition gasoline engine.  - international journal of automotive and mechanical engineering.  3540-3554. 

nik muhammad hafiz, mohd radzi abu mansor, wan mohd faizal wan mahmood, fadzli ibrahim, shahrir abdullah, kamaruzzaman sopian.  (2016).  numerical study of hydrogen fuel combustion in compression ignition engine under argon-oxygen atmosphere.  - jurnal teknologi.  77-83. 

siti aminah osman, muhamad azry khoiry, norinah abd. rahman, ashrani a. abd. rahni, mohd radzi abu mansor, darman nordin, suhana johar.  (2016).  the effectiveness of industrial training from the perspective of students of the civil and structure engineering department.  - journal of engineering science and technology.  1-12. 

n. m. m. rasidi, s. abdullah, d. a. wahab, r. ramli, m. r. a. mansor and r. m. yasin.  (2016).  generation of idea for product innovation in design course.  - man in india.  411-418. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2015).  a review of soot particle measurement in lubricating oil.  - defense s&t technical bulletin.  141-152. 

m.h.zulkefli; mohd radzi abu mansor.  (2015).  the effect of injector position on direct injection hydrogen engine conditions.  - journal of engineering science and technology.  55-61. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

mohd radzi abu mansor; tan chun hyiin; nik muhammad hafiz; wan mohd faizal wan mahmood; w ghopa wan aizon; shahrir abdullah.  (2015).  fundamental study on combustion characteristics of direct injection gaseous fuel.  - arpn journal of engineering and applied sciences.  7375-7379. 

mohd radzi abu mansor, nor afzanizam samiran, wan mohd faizal wan mahmood, raja nazatul akhma.  (2014).  effect of injector nozzle design on spray characteristics for hydrogen direct injection engine conditions.  - applied mechanics and materials.  406-410. 

w ghopa wan aizon, ken-ichi funazaki, mohd radzi abu mansor.  (2014).  aerodynamics performance of endwall film cooling under the influence of purge flow in high pressure turbine cascade.  - applied mechanics and materials.  119-124. 

mohd radzi abu mansor, masahiro shioji.  (2013).  characterization of hydrogen jet development in an argon atmosphere.  - green energy and technology.  133-140. 

mohd radzi abu mansor, shinji nakao, katsutaka nakagami, masahiro shioji.  (2012).  study on hydrogen-jet development in the argon atmosphere.  - green energy and technology.  108:177-184. 

a.r. ismail, m.r.a. mansor, m.f. m. ali, s. jaafar and m.s.n.m. johar.  (2010).  biomechanics analysis for right leg instep kick.  - journal of applied sciences.  10(13):1286-1292. 

a.r. ismail, m.r.a. mansor, m.f.m. ali, s. jaafar and n.k. makhtar.  (2010).  biomechanical analysis of ankle force: a case study for instep kicking.  - american journal of applied sciences.  7(3):323-330. 

a. r. ismail, m.j.m.nor, m.r.a. mansor, m.f.m.tahir, r.zulkifli.  (2009).  environmental noise assessment and modeling in malaysia: a comparative monitoring study.  - european journal of scientific research.  30(2):236-244. 

a.r.ismail, m.r.a.mansor, m.j.m.nor, m.z.nuawi, r. zulkifli, m. n. ab. rahman and k. sopian.  (2008).  comparative studies and impact analysis of environmental noise modeling from malaysian industrial projects.  - wseas transactions on environment and development.  4(8):666-675.