kamal yunos, wan fathul hakim w. zamri, intan fadhlina mohamed, meor iqram meor ahmad, ahmad afiq pauzi & maizatul syuhaiba zukifli .  (2025).  comparative tensile behavior of martensitic stainless steels for steam turbine blades at high temperatures.  - jurnal kejuruteraan.  3713 - 3724. 

shahir mohd yusuf, intan fadhlina mohamed, sarminah samad, nong gao.  (2025).  tribological behavior of nanostructured alsi10mg fabricated by laser powder bed fusion/high-pressure torsion hybrid.  - journal of materials science.  23967 - 23982. 

s. samat, m. z. omar, i. f. mohamed, a. h. baghdadi and a. m. aziz.  (2025).  a comparative study on microstructure, mechanical property and damping capacity of hypoeutectic al-si-cu alloy for different casting technologies.  - international journal of metalcasting.  1180 - 1193. 

jingchuan tang, mohd zaidi omar, ripeng jiang, and intan fadhlina mohamed.  (2025).  effect of tib2 on the microstructure and mechanical properties of tib2/al-5cu matrix composites.  - jom.  1064 - 1078. 

jingchuan tang, mohd zaidi omar, ripeng jiang, intan fadhlina mohamed, anqing li.  (2025).  effect of different ultrasonic power on microstructure and mechanical properties of zl205a/tib2 composite materials.  - metals and materials international.  890 - 906. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nashrah hani jamadon & nabilah afiqah mohd radzuan.  (2025).  microstructural evolution and performance of heat-treated ti6al4v in laser powder bed fusion.  - sains malaysiana.  2045 - 2057. 

ahmad muhammad aziz, mohd. zaidi omar , saziana samat, intan fadhlina mohamed, mohd. rhafiq mazlan, mohammad azlan aripin.  (2024).  microstructural characterisation and high-cycle fatigue behaviour of semisolid al–si–cu alloy.  - international journal of metalcasting.  2612 - 2623. 

aziz a.m., omar m.z., samat s., mohamed i.f., sajuri z., baghdadi a.h..  (2024).  microstructural and tensile behavior of a thixoformed al–si–cu–mg given t5 and t6 heat treatments tested at room and elevated temperatures.  - international journal of metalcasting.  2343 - 2356. 

tan zhi xian, tang tsz loong, hamidon salleh, hasan abdualatif muhalhal, nur syahirah mohd hanafi, intan fadhlina mohamed, mohd anas mohd sabri, wan aizon wan ghopa.  (2024).  numerical study on heat transfer characteristics of jet impingement by using mgo nanofluid.  - journal of advanced research in fluid mechanics and thermal sciences.  202 - 218. 

muhammad hafizzuddin noorazzmy, muhammad imran sadiq, mohd anas mohd sabri, intan fadhlina mohamed, hamidon salleh, hasan abdualatif muhalhal, wan aizon wan ghopa.  (2024).  investigation of vibrational response of bio-lubricants and sae40 for journal bearing application.  - journal of advanced research in fluid mechanics and thermal sciences.  214 - 230. 

ahmad muhammad aziz, intan fadhlina mohamed, zenji horita, mohd zaidi omar, zainuddin sajuri, norinsan kamil othman, junaidi syarif, mohamed abdelgawad gebril, farhad ostovan, seungwon lee, kenji matsuda, manabu yumoto, yoichi takizawa, ammar abdulkareem.  (2024).  strengthening of a5052 aluminum alloy by high-pressure sliding process.  - journal of materials science.  5754-5770. 

afifah md ali, mohd zaidi omar, intan fadhlina mohamed, mohd shukor salleh, hanizam hashim, nur farah bazilah wakhi anuar.  (2024).  effect of heat treatment on the microstructures and mechanical properties of thixoformed graphene-reinforced aluminium alloy composite.  - international journal of metalcasting.  1695-1709. 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, abdul hadi azman, wan sharuzi wan harun, msh al-furjan.  (2023).  review on volumetric energy density: influence on morphology and mechanical properties of ti6al4v manufactured via laser powder bed fusion.  - progress in additive manufacturing.  265-283. 

mohd rhafiq mazlan, nashrah hani jamadon, armin rajabi, abu bakar sulong, intan fadhlina mohamed, farazila yusof, nur ayuni jamal.  (2023).  necking mechanism under various sintering process parameters - a review.  - journal of materials research and technology - jmr&t.  2189-2201. 

takuya komatsu, takahiro masuda, yongpeng tang, intan fadhlina mohamed, manabu yumoto, yoichi takizawa and zenji horita.  (2023).  production of ultrafine-grained aluminum alloys in upsized sheets using process of incremental feeding high-pressure sliding (if-hps).  - material transactions.  436-442. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, dawod mohamed elabar, farag ibrahim haider, saziana samat and osama m. irfan.  (2023).  effect of semisolid and heat treatment process on microstructural refinement of al-7si alloy.  - materials.  1-13. 

takahiro masuda, yongpeng tang, intan fadhlina mohamed, zenji horita.  (2023).  ultrafine-grained az61 alloy produced by high-pressure torsion: advent of superplasticity and effect of anisotropy.  - materials science and engineering: a.  1-9. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, intan fadhlina mohamed, junaidi syarif, ahmad muhammad aziz, fathin iliana jamhari.  (2023).  microstructure and mechanical properties of selective laser melted 17-4 ph stainless steel; build direction and heat treatment processes.  - materials today communications.  1-13. 

nuramilawahida mat ropi, hawa hishamuddin, dzuraidah abd wahab, wakhid ahmad jauhari, fatin amrina a. rashid, nor kamaliana khamis, intan fadhlina mohamed, mohd anas mohd sabri, mohd radzi abu mansor.  (2023).  optimal lot-sizing decisions for a remanufacturing production system under spare parts supply disruption.  - mathematics.  4053-4072. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, ahmad muhammad aziz, osama m. irfan.  (2023).  the microstructural refinement of the a356 alloy using semi-solid and severe plastic-deformation processing.  - metals.  1-24. 

a. md ali, m.z. omar, m.s. salleh, i.f. mohamed, n.f.b wakhi anuar.  (2023).  investigation of the mechanical properties and microstructure of graphene-aluminium alloy composite fabricated by stir casting process.  - materials science forum.  3-8. 

junaidi syarif, amro altoyuri, intan fadhlina mohamed.  (2022).  equal channel angular pressing of single crystal aluminum: a molecular dynamics simulation.  - journal of materials research and technology.  888-897. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  combining heat treatment and high-pressure torsion to enhance the hardness and corrosion resistance of a356 alloy.  - metals.  1-12. 

afifah md ali, mohd zaidi omar, mohd shukor salleh, hanizam hashim, intan fadhlina mohamed, nur farah bazilah wakhi anuar.  (2022).  mechanical behaviour and morphology of thixoformed aluminium alloy reinforced by graphene.  - materials.  1-15. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, junaidi syarif, intan fadhlina mohamed and ahmad muhammad aziz.  (2022).  effects of build orientations on microstructure evolution, porosity formation, and mechanical performance of selective laser melted 17-4 ph stainless steel.  - metals.  1-24. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  microstructure refinement by a combination of heat treatment and thixoforming process followed by severe plastic deformation and their effects on al-si alloy hardness.  - metals.  1-15. 

m.a. fauthan, s. abdullah,m.f. abdullah, i.f. mohamed.  (2022).  multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy.  - frattura ed integrita strutturale.  289-303. 

saziana samat, mohd zaidi omar, amir hossein baghdadi, intan fadhlina mohamed, ahmad muhammad aziz.  (2021).  mechanical properties and microstructures of a modified al-si-cu alloy prepared by thixoforming process for automotive connecting rods.  - journal of materials research and technology.  1086-1102. 

leong chee yau, wan fathul hakim w. zamri, muhammad faiz md din, ahmad kamal ariffin, intan fadhlina mohamed.  (2021).  influences of coefficient of frictions on the contact behavior for ball bearings.  - solid state technology.  4387-4394. 

n.j. suang, w.f.h. w. zamri, m.f.m. din, a. shamsudeen, i. f. mohamed, a.k. ariffin.  (2021).  effects of layer addition on hardness of a multi-layered tialn and tin coating.  - solid state technology.  7339-7351. 

s. samat, m.z. omar, a.h. baghdadi, i.f. mohamed, a. rajabi, a.m. aziz.  (2021).  microstructural evolution, dislocation density and tensile properties of al-6.5si-2.1cu-0.35mg alloy produced by different casting processes.  - journal of materials science and technology.  145-157. 

farhad ostovan, ehsan shafiei, meysam toozandehjani, intan fadhlina mohamed, masoud soltani.  (2021).  on the role of molybdenum on the microstructural,mechanical and corrosion properties of the gtawaisi 316 stainless steel welds.  - journal of materials research and technology.  2115-2125. 

esmaeil amiri, farhad ostovan, meysam toozandehjani, ehsan shafiei, intan fadhlina mohamed.  (2021).  study and selection of most appropriate filler rod for gtaw of s32750 super duplex steel joints: a comprehensive study on microstructural, mechanical and corrosion properties.  - materials chemistry and physics.  1-12. 

afifah md ali, mohd zaidi omar, hanizam hashim, mohd shukor salleh and intan fadhlina mohamed.  (2021).  recent development in graphene-reinforced aluminium matrix composite: a review.  - reviews on advanced materials science.  801-817. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

leong chee yau, wan fathul hakim w. zamri, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2020).  an elasto-plastic ball bearing contact with bilinear hardening.  - international journal of innovative technology and exploring engineering.  438-445. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, ahmad kamal ariffin, muhammad faiz md din, intan fadhlina mohamed, guanyu deng.  (2020).  the effect of tialn-based and alcrn-based coatings towards mechanical properties on punch tools using finite element method.  - jurnal tribologi.  65-79. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman.  (2019).  microstructural evaluation and corrosion resistance of semisolid cast a356 alloy processed by equal channel angular pressing.  - metals.  1-15. 

wan fathul hakim w zamri, ng jie suang, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2019).  modelling of nanoindentation of tialn and tin thin film coatings for automotive bearing.  - international journal of recent technology and engineering (ijrte).  7197-7199. 

mohamed a. gebril, m. zaidi. omar, nk. othman & i.f. mohamed.  (2019).  effect of equal channel angular pressing processing routes on corrosion resistance and hardness of heat treated a356 alloy.  - sains malaysiana.  661-668. 

saziana samat, mohd zaidi omar and intan fadhlina mohamed.  (2019).  effect of feedstock geometry on the semisolid processing of al-si-cu-mg alloy.  - materials research express.  1-11. 

saziana samat, mohd zaidi omar, intan fadhlina mohamed.  (2019).  high-frequency induction heating of al-si-cu-mg aluminium alloy in thixoforming.  - materials research.  1-13. 

m.a. gebril, m.z. omar, n.k. othman & i.f. mohamed.  (2019).  microstructural refinement and corrosion resistance improvement of heat-treated a356 alloy processed by equal channel angular pressing.  - sains malaysiana.  2749-2757. 

najlaa nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

wan fathul hakim w.zamri, intan fadhlina mohamed, khairunas bakri, muhamad faiz md din.  (2018).  simulation of nanoindentation of single and multiple coating layers for automotive bearings.  - international journal of engineering & technology.  . 

najla nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  121-125. 

intan fadhlina mohamed, takahiro masuda, seungwon lee, kaveh edalati, zenji horita, shoichi hirosawa, kenji matsuda, daisuke terada, mohd zaidi omar.  (2017).  strengthening of a2024 alloy by high pressure torsion and subsequent aging.  - journal of materials science and engineering a.  112-118. 

siti fatimah hassan, wan fathul hakim w zamri, intan fadhlina mohamed, wan aizon wan ghopa, muhammad faiz md din.  (2017).  influence of bilayer structure and sublayer distance on the hardness of multilayer thin film tialn and crn.  - journal of mechanical engineering.  201-212. 

farrahshaida mohd salleh, abu bakar sulong, farhana mohd foudzi, intan fadhlina mohamed, natasha emira azaman, najla nazihah mas'ood, seong jin park.  (2017).  flow behavior characterization of hydroxyapatite for powder injection molding (pim).  - journal of mechanical engineering.  77-88. 

intan fadhlina mohamed, seungwon lee, kaveh edalati, zenji horita, shahrum abdullah, mohd zaidi omar, wan fathul hakim wan zamri.  (2016).  grain refinement and microstructure evolution in aluminum a2618 alloy by high pressure torsion.  - jurnal teknologi.  149-152.