Penerbitan Berimpak Tinggi

nurul hayati abdul halim, che hassan che haron & jaharah abdul ghani.  (2020).  sustainable machining of hardened inconel 718: a comparative study.  - international journal of precision engineering and manufacturing.  1375-1387. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

n.n. nor hamran, j.a. ghani, r. ramli, c.h. che haron.  (2020).  a review on recent development of minimum quantity lubrication for sustainable machining.  - journal of cleaner production.  1-18. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

natasha a. raof, jaharah a. ghani, che hassan che haron.  (2019).  machining-induced grain refinement of aisi 4340 alloy steel under dry and cryogenic conditions.  - journal of materials research and technology.  4347-4353. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering. 

m.s. kasim, m.s.a. hafiz, j.a. ghani, c.h.c. haron, r. izamshah, s.a. sundi, s.b. mohamed, i.s. othman.  (2019).  investigation of surface topology in ball nose end milling process of inconel 718.  - wear.  1318-1326. 

j.a. ghani, m.n.a.m. dali, h.a. rahman, c.h.c. haron, w.m.f. wan mahmood,m.r.m. rasani, m.z. nuawi.  (2019).  analysis of dimple structure fabricated using turning process and subsequent reduction in friction.  - wear.  1280-1285. 

n.h.a. halim, c.h.c. haron, j.a. ghani, m.f. azhar.  (2019).  tool wear and chip morphology in high-speed milling of hardened inconel 718 under dry and cryogenic co2 conditions.  - wear.  1683-1690. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi & che hassan che haron.  (2018).  an embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling.  - the international journal of advanced manufacturing technology.  811-823. 

m. rizal , j.a.ghani , m.z.nuawi, c.h.c.haron.  (2017).  cutting tool wear classification and detection using multi-sensor signals and mahalanobis-taguchi system.  - wear.  1759-1765. 

a.h.musfirah, j.a.ghani , c.h.che haron.  (2017).  tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed.  - wear.  125-133. 

nor khairusshima muhamad khairussaleh, che hassan che haron and jaharah a. ghani.  (2016).  study on wear mechanism of solid carbide cutting tool in milling cfrp.  - journal of material research.  1883-1889. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

m. s. kasim, c. h. che haron, j. a. ghani, m. a. hadi, r. izamshah, t. j. s. anand & s. b. mohamed.  (2016).  cost evaluation on performance of a pvd coated cutting tool during end-milling of inconel 718 under mql conditions.  - transactions of the imf.  175-181. 

jaharah a. ghani and che hassan che haron, mohd shahir kasim and mohd amri sulaiman, siti haryani tomadi.  (2016).  wear mechanism of coated and uncoated carbide cutting tool in machining process.  - journal of material research.  1873-1879. 

musfirah abdul hadi, jaharah a. ghani, che hassan che haron and mohd. shahir kasim.  (2016).  effect of cutting speed on the carbide cutting tool in milling inconel 718 alloy.  - journal of materials research.  1885-1892. 

a.r. natasha, j.a. ghani, c.h. che haron, j. syarif, a.h. musfirah.  (2016).  temperature at the tool-chip interface in cryogenic and dry turning of aisi 4340 using carbide tool.  - international journal of simulation modelling.  1-12. 

yanda, h.; ghani, j. a.; rizal, m. & che haron, c. h..  (2015).  performance of uncoated and coated carbide tools in turning fcd700 using fem simulation.  - international journal of simulation modelling.  416-425. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2015).  development and testing of an integrated rotating dynamometer on tool holder for milling process.  - mechanical systems and signal processing.  559-576. 

jaharah a. ghani, muhammad rizal, che hassan che haron.  (2014).  performance of green machining: a comparative study of turning ductile cast iron fcd700.  - journal of cleaner production.  289-292. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2013).  online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system.  - applied soft computing.  13(4):1960-1968. 

jaharah a. ghani, che hassan che haron, siti hartini hamdan, ahmad yasir md said, siti haryani tomadi.  (2013).  failure mode analysis of carbide cutting tools used for machining titanium alloy.  - ceramics international.  39(4):4449-4456. 

m.k. nor khairusshima, c.h. che hassan, a.g. jaharah, a.k.m. amin, a.n. md idriss.  (2013).  effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic.  - wear.  302:1113-1123. 

m.s. kasim, c.h. che haron, j.a. ghani, m.a. sulaiman, m.z.a. yazid.  (2013).  wear mechanism and notch wear location prediction model in ball nose end milling of inconel 718.  - wear.  302:1171-1179. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

salah al-zubaidi, jaharah a. ghani, che hassan che haron.  (2013).  optimization of cutting conditions for end milling of ti6al4v alloy by using a gravitational search algorithm (gsa).  - meccanica.  48(7):1701-1715. 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624.