al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2022).  sintering behavior of bi-material micro-component of 17-4ph stainless steel and ysintering behavior of bi-material micro-component of 17-4ph stainless steel and yttria-stabilized zirconia produced by.  - materials.  1-13. 

saad ali, faiz ahmad, puteri sri melor megat yusoff, norhamidi muhamad, eugenio onate, muhammad rafi raza, khurshid malik.  (2021).  a review of graphene reinforced cu matrix composites for thermal management of smart electronics.  - composites part a.  1-25. 

mohd yusuf zakaria, mohd ikram ramli, abu bakar sulong, norhamidi muhamad, muhammad hussain ismail.  (2021).  application of sodium chloride as space holder for powder injection molding of alloy titanium - hydroxyapatite composites.  - journal of materials research and technology.  478-486. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

hossein mohammadi, norhamidi muhamad, abu bakar sulong, mohsen ahmadipour.  (2021).  recent advances on biofunctionalization of metallic substrate using ceramic coating: how far are we from clinically stable implant?.  - journal of the taiwan institute of chemical engineers.  254-270. 

hossein mohammadi, mohammad majid sepantafar, norhamidi muhamad, abu bakar sulong.  (2021).  how does scaffold porosity conduct bone tissue regeneration?.  - advanced engineering materials.  1-19. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2021).  feedstock properties and debinding mechanism of yttria-stabilized zirconia/ stainless steel 17-4ph micro-components fabricated via two-component micro-powder injection molding process.  - ceramics international.  20476-20485. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, ukwueze bonaventure emeka.  (2021).  process parameters used in macro/micro powder injection molding: an overview.  - metals and materials international.  2023-2045. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2020).  bi-material micro-part of stainless steel and zirconia by two-component micro-powder injection molding: rheological properties and solvent debinding behavior.  - metals.  1-17. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

farah 'atiqah abdul azam, zakaria razak, mohd khairul fadzly md radzi, norhamidi muhammad, che hassan che haron, and abu bakar sulong.  (2020).  influence of multiwalled carbon nanotubes on the rheological behavior and physical properties of kenaf fiber reinforced polypropylene composites.  - polymers.  1-13. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, muhammad rafi raza, mohd ikram ramli.  (2019).  incorporation of wollastonite bioactive ceramic with titanium for medical applications: an overview.  - materials science & engineering c.  . 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, mohd ikram ramli.  (2019).  rheological properties of titanium-hydroxyapatite with powder space holder composite feedstock for powder injection moulding.  - international journal of advanced manufacturing technology.  2591-2599. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2019).  effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process.  - ceramics international.  11648-11653. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

w.s.w. harun, m.s.i.n. kamariah, n.muhamad, s.a.c. ghani, f. ahmad, z. mohamed.  (2018).  a review of powder additive manufacturing processes for metallic biomaterials.  - powder technology.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi , mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite.  - plos one.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  microstructure and physical and mechanical properties of micro cemented carbide injection.  - powder technology.  151-158. 

majid niaz akhtara, abu bakar sulong, m.k. fadzly radzi, n.f. ismail, m.r. razab, norhamidi muhamad, muhammad azhar khan.  (2016).  influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications.  - progress in natural science: materials international.  657-664. 

muhammad rafi raza, faiz ahmad, norhamidi muhamad , abu bakar sulong , m.a. omar,majid niaz akhtar, muhammad aslam.  (2016).  effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 l stainless steel.  - powder technology.  135-142. 

fayyaz a., muhamad n., sulong a.b., yunn h.s., amin s.y.m., rajabi j..  (2015).  micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties.  - ceramics international.  3605-3612. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2015).  powder injection molding of ha ti6al4v composite using palm stearin as based binder for implant material.  - material and design.  1028-1034. 

somaieh alavi, dzuraidah abd. wahab, norhamidi muhamad & behrooz arbab shirani.  (2014).  organic structure and organisational learning as the main antecedents of workforce agility.  - international journal of production research.  6273-6295. 

s.y. heng, m.r. raza, n. muhamad, a.b. sulong, a. fayyaz.  (2014).  micro powder injection molding (upim) of tungsten carbide.  - international journal of refractory metals and hard materials.  45:189-195. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, javad rajabi, yee ning wong.  (2014).  fabrication of cemented tungsten carbide components bymicro-powder injection moulding.  - journal of materials processing technology.  214:1436-1444. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  material processing of hydroxyapatite and titanium alloy (ha/ti) composite as implant materials using powder metallurgy: a review.  - materials and design.  55:165-175. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2014).  the effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part.  - materials and design.  223-232. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  binder removal via a two-stage debinding process for ceramic injection molding parts.  - ceramics international.  40(2014):2819-2824. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  fabrication of zirconia-toughened alumina parts by powder injection molding process: optimized processing parameters.  - ceramics international.  40: 273-280. 

dedikarni panuh, andanastuti muchtar, norhamidi muhamad, edy herianto majlan, wan ramli wan daud.  (2014).  fabrication of thin ag-ysb composite cathode film for intermediate temperature solid oxide fuel cells.  - composites part b-engineering.  58 (2014): 193-198. 

heng s.y., raza m.r., muhamad n., sulong a.b., fayyaz a..  (2014).  micro-powder injection molding (?pim) of tungsten carbide.  - international journal of refractory metals and hard materials.  189 - 195. 

m.a.m. arif, m.z. omar, n. muhamad, j. syarif, p. kapranos.  (2013).  microstructural evolution of solid-solution-treated zne22al in the semisolid state.  - journal of materials science & technology.  29(8):765-774. 

shye yunn heng, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, sri yulis m. amin.  (2013).  effect of sintering temperature on the mechanical and physical properties of wc-10%co through micro-powder injection molding (mpim).  - ceramics international.  39:4457-4464. 

muhammed ali s. a., andanastuti muchtar, abu bakar sulong, norhamidi muhamad, edy herianto majlan.  (2013).  influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells.  - ceramics international.  39(5):5813-5820. 

nagur aziz kamal bashah, norhamidi muhamad, baba md deros, ahmad zakaria, shaharum ashari, achmed mobin, mohd safuan mohd abdul lazat.  (2013).  multi-regression modeling for springback effect on automotive body in white stamped parts.  - materials and design.  46:175-435. 

abu bakar sulong, mohd ikram ramli, seow liang hau, jaafar sahari, norhamidi muhamad, hendra suherman.  (2013).  rheological and mechanical properties of carbon nanotube/graphite/ss316l/polypropylene nanocomposite for a conductive polymer composite.  - composite: part b.  50:54-61. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2013).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  39(3):2665-2674. 

hamimah abd. rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2013).  la0.6sr0.4co0.2fe0.8o3-sdc carbonate composite cathodes for low-temperature solid oxide fuel cells.  - materials chemistry and physics.  141:752-757. 

mojgan ahmadrezaei, andanastuti muchtar, norhamidi muhamad, c.y. tan, edy herianto majlan.  (2013).  electrochemical and microstructural characteristics of nanoperovskite oxides ba0.2sr0.8co0.8fe0.2o3-d (bscf) for solid oxide fuel cells.  - ceramics international.  39(1):439-444. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2012).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  2665-2674. 

hamimah abdul rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2012).  structure and thermal properties of la0.6sr0.4co0.2fe0.8o3d-sdc carbonate composite cathodes for intermediate- to low-temperature solid oxide fuel cells.  - ceramics international.  38: 1571-1576. 

amirhossein mansourighasri, n. muhamad, a. b. sulong.  (2012).  processing titanium foams using tapioca starch as a space holder.  - journal of materials processing technology.  212:83-89. 

m.a. mussa, s. abdullah, c.s. nor azwadi, n. muhamad.  (2011).  simulation of natural convection heat transfer in an enclosure by the lattice-boltzmann method.  - computers & fluids.  44(1):162-168. 

ahmed y. musa, n. muhamad, lim tien tien, eng pei chee.  (2011).  synergistic effect of iodide ion and 1-(2h)-phthalazinone on galvanic corrosion of aluminum and mild steel in 1.0 m hcl.  - international journal of electrochemical science.  6:5298-5304. 

h. abolhasani, n. muhamad.  (2010).  a new starch-based binder for metal injection molding.  - journal of materials processing technology.  210(6-7):961-968. 

faizal mustapha, mazli mustapha, kartini noorsal, othman mamat, patthi hussain, faiz ahmad, norhamidi muhamad, sallehuddin mohamed haris.  (2010).  preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process.  - journal of materials processing technology.  210(12):1598-1612.