mohd nur ikhmal salehmin, muhammad farhan hil me, wan ramli wan daud, nazlina haiza mohd yasin, mimi hani abu bakar, abu bakar sulong, swee su lim.  (2023).  construction of microbial electrodialysis cells equipped with internal proton migration pathways: enhancement of wastewater treatment, desalination, and hydrogen production.  - science of the total environment.  1-13. 

al basir, norhamidi muhamad, abu bakar sulong, muhammad bin mohamed amin, nashrah hani jamadon, nabilah afiqah mohd radzuan.  (2023).  micro-injection molding and debinding behavior of hydroxyapatite/zirconia bi-materials fabricated by two-component micro powder injection molding process.  - materials.  1-18. 

j mogan, w. s. w. harun, k. kadirgama, d. ramasamy, f. m. foudzi, a. b. sulong, f. tarlochan and f. ahmad.  (2023).  fused deposition modelling of polymer composite: a progress.  - polymers.  1-28. 

qian wen yeang, abu bakar sulong, soon huat tan.  (2022).  electrospun carboxyl-functionalised multi-walled carbon nanotube/poly(vinyl alcohol) asymmetric pervaporation membrane: application and modeling.  - journal of applied polymer science.  1-19. 

mohd nur ikhmal salehmin, teuku husaini, jonathan goh, abu bakar sulong.  (2022).  high-pressure pem water electrolyser: a review on challenges and mitigation strategies towards green and low-cost hydrogen production.  - energy conversion and management.  1-28. 

hendra suherman, radwan dweiri, abu bakar sulong, mohd yusuf zakaria, yovial mahyoedin.  (2022).  improvement of the electrical-mechanical performance of epoxy/graphite composites based on the effects of particle size and curing conditions.  - polymers.  1-14. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, david hui.  (2022).  adhesion behaviour of 3d printed polyamide carbon fibre composite filament.  - reviews on advanced materials science.  838-848. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2022).  sintering behavior of bi-material micro-component of 17-4ph stainless steel and ysintering behavior of bi-material micro-component of 17-4ph stainless steel and yttria-stabilized zirconia produced by.  - materials.  1-13. 

hedaiat moradpoor, hossein mohammadi, mohsen safaei, hamid reza mozaffari, roohollah sharifi, pourya gorji, abu bakar sulong, norhamidi muhamad, mona ebadi.  (2022).  recent advances on bacterial cellulose-based wound management: promises and challenges.  - international journal of polymer science.  1-24. 

hossein mohammadi, mohammad majid sepantafar, norhamidi muhamad, abu bakar sulong.  (2021).  how does scaffold porosity conduct bone tissue regeneration?.  - advanced engineering materials.  1-19. 

lohashenpahan shanmuganantha , azmi baharudin , abu bakar sulong , roslinda shamsudin and min hwei ng.  (2021).  prospect of metal ceramic (titanium-wollastonite) composite as permanent bone implants: a narrative review.  - materials.  1-24. 

m.ahsanul haque. abu bakar sulong, l.kee shyuan, e.herianto majlan, t. husaini, r.emilia rosli.  (2021).  synthesis of polymer/mwcnt nanocomposite catalyst supporting materials for high-temperature pem fuel cells.  - international journal of hydrogen energy.  4339-4353. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, ukwueze bonaventure emeka.  (2021).  process parameters used in macro/micro powder injection molding: an overview.  - metals and materials international.  2023-2045. 

nurul nadiah mahmud, abu bakar sulong, bhupendra sharma and kei ameyama.  (2021).  presintered titanium-hydroxyapatite composite fabricated via pim route.  - metals.  1-10. 

nurul nadiah mahmud, farah atiqah abdul azam, mohd ikram ramli, farhana mohd foudzi, kei ameyama, abu bakar sulong.  (2021).  rheological properties of irregular-shaped titanium-hydroxyapatite bimodal powder composite moulded by powder injection moulding.  - journal of materials research and technology.  2255-2264. 

mohd yusuf zakaria, mohd ikram ramli, abu bakar sulong, norhamidi muhamad, muhammad hussain ismail.  (2021).  application of sodium chloride as space holder for powder injection molding of alloy titanium - hydroxyapatite composites.  - journal of materials research and technology.  478-486. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

shabbah begum, nor yuliana yuhana, noorashikin md saleh, nur hidayatul nazirah kamarudin, abu bakar sulong.  (2021).  review of chitosan composite as a heavy metal adsorbent: material preparation and properties.  - carbohydrate polymers.  1-9. 

hossein mohammadi, norhamidi muhamad, abu bakar sulong, mohsen ahmadipour.  (2021).  recent advances on biofunctionalization of metallic substrate using ceramic coating: how far are we from clinically stable implant?.  - journal of the taiwan institute of chemical engineers.  254-270. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2021).  feedstock properties and debinding mechanism of yttria-stabilized zirconia/ stainless steel 17-4ph micro-components fabricated via two-component micro-powder injection molding process.  - ceramics international.  20476-20485. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

farah atiqah abdul azam, nishata royan rajendran royan, nor yuliana yuhana, nabilah afiqah mohd radzuan, sahrim ahmad and abu bakar sulong.  (2020).  fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties.  - polymers.  1-14. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2020).  bi-material micro-part of stainless steel and zirconia by two-component micro-powder injection molding: rheological properties and solvent debinding behavior.  - metals.  1-17. 

youping gong, fei wang, m. s. h. al furjan, lijun shan, jingyang he, xiangjuan bian,zhikai bi, haiqiang liu, wenxin li, huifeng shao, guojin chen and abu bakar sulong 4.  (2020).  experimental investigation and optimal 3d bioprinting parameters of sa gel porous cartilage scaffold.  - applied sciences.  1-22. 

h. hanizam, m.s. salleh, m.z. omar, a.b. sulong, m.a.m. arif.  (2020).  effects of hybrid processing on microstructural and mechanical properties of thixoformed aluminum matrix composite.  - journal of alloys and compounds.  1-12. 

majid niaz akhtar, sumbal javed, mukhtar ahmad, abu bakar sulong, muhammad azhar khand.  (2020).  sol gel derived mnti doped co2 w-type hexagonal ferrites: structural, physical, spectral and magnetic evaluations.  - ceramics international.  7842-7849. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

farah 'atiqah abdul azam, zakaria razak, mohd khairul fadzly md radzi, norhamidi muhammad, che hassan che haron, and abu bakar sulong.  (2020).  influence of multiwalled carbon nanotubes on the rheological behavior and physical properties of kenaf fiber reinforced polypropylene composites.  - polymers.  1-13. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering.  . 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, mohd ikram ramli.  (2019).  rheological properties of titanium-hydroxyapatite with powder space holder composite feedstock for powder injection moulding.  - international journal of advanced manufacturing technology.  2591-2599. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, muhammad rafi raza, mohd ikram ramli.  (2019).  incorporation of wollastonite bioactive ceramic with titanium for medical applications: an overview.  - materials science & engineering c.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2019).  effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process.  - ceramics international.  11648-11653. 

lijun shan, abdul amir h. kadhum, m.s.h. al-furjan, wenjian weng, youping gong, kui cheng, maoying zhou, lingqing dong, guojin chen, mohd s. takriff, abu bakar sulong.  (2019).  in situ controlled surface microstructure of 3d printed ti alloy to promote its osteointegration.  - materials.  1-13. 

h. hanizam, m.s. salleh, m.z. omar, a.b. sulong.  (2019).  effects of mechanical stirring and short heat treatment on thixoformed of carbon nanotube aluminium alloy composite.  - journal of alloys and compounds.  83-90. 

nabilah afiqah mohd radzuan, abu bakar sulong, teuku husaini, edy herianto majlan, masli irwan rosli, muhammad firdaus aman.  (2019).  fabrication of multi-filler mcf/mwcnt/sg-based bipolar plates.  - ceramics international.  . 

nabilah afiqah mohd radzuan , abu bakar sulong, david hui and anil verma.  (2019).  electrical conductivity performance of predicted modified fibre contact model for multi-filler polymer composite.  - polymers.  1-12. 

hashim hanizam, mohd shukor salleh, mohd zaidi omar, abu bakar sulong.  (2019).  optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through taguchi method.  - journal of materials research and technology-jmr&t.  2223-2231. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

rosli, r.e., sulong, a.b., daud, w.r.w., zulkifley, m.a., rosli, m.i., majlan, e.h., haque, m.a. & radzuan n.a.m..  (2019).  the design and development of an ht-pemfc test cell and test station.  - international journal of hydrogen energy.  30763-30771. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu, ahmad tajuddin abdullah, teuku husaini, ros emilia rosli, edy herianto majlan, masli irwan rosli.  (2019).  fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on pem fuel cell bipolar plate.  - international journal of hydrogen energy.  30618-30626. 

qian wen yean, abu bakar sulong, soon huat tan.  (2018).  asymmetric membrane containing electrospun cu-btc/poly(vinyl alcohol) for pervaporation dehydration of 1,4-dioxane.  - separation and purification technology.  . 

nabilah afiqah mohd radzuan, abu bakar sulong , mahendra rao somalu , edy herianto majlan, teuku husaini and masli irwan rosli.  (2018).  effects of die configuration on the electrical conductivity of polypropylene reinforced milled carbon fibers: an application on a bipolar plate.  - polymers.  . 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana, ruey shan chen, mohd hafizuddin ab ghani, sahrim ahmad.  (2018).  uv/o3 treatment as a surface modification of rice husk towards preparation of novel biocomposites.  - plos one.  . 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  microstructure and physical and mechanical properties of micro cemented carbide injection.  - powder technology.  151-158. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi , mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite.  - plos one.  . 

majid niaz akhtar, abu bakar sulong, a. umer, ammar bin yousaf, muhammad azhar khan.  (2018).  multi-component mwcnt/ng/ep-based bipolar plates with enhanced mechanical and electrical characteristics fabricated by compression moulding.  - ceramics international.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

majid niaz akhtar, a.b. sulong, m.n. akhtar, muhammad azhar khan.  (2018).  systematic study of ce3þ on the structural and magnetic properties of cu nanosized ferrites for potential applications.  - journal of rare earths.  156-164. 

m.f.f.a.hamidi, w.s.w.harun, m.samykano, s.a.c.ghani, z.ghazali, f.ahmad, a.b.sulong.  (2017).  a review of biocompatible metal injection moulding process parameters for biomedical applications.  - materials science and engineering c.  1263-1276. 

gaaz, t.s., sulong, a.b., kadhum, a.a.h., nassir, m.h., al-amiery, a.a..  (2017).  surface improvement of halloysite nanotubes.  - applied sciences (switzerland).  291-299. 

gaaz, t.s., sulong, a.b., kadhum, a.a.h., al-amiery, a.a., nassir, m.h., jaaz, a.h..  (2017).  the impact of halloysite on the thermo-mechanical properties of polymer composites.  - molecules.  838-858. 

tayser sumer gaaz, abdul amir h kadhum, patina kiah anak michael, ahmed al amiery, abu bakar sulong, abu bakar sulong, mohamed h nassir, ahmed hameed jaaz.  (2017).  unique halloysite nanotubes polyvinyl alcohol polyvinylpyrrolidone composite complemented with physico chemical characterization.  - polymers.  207-222. 

gaaz, ts., sulong, a.b., ansari, m.n.m., kadhum, a.a.h., al-amiery, a.a., nassir, m.h..  (2017).  effects of starch loading on the thermo mechanical and morphological properties of polyurethane composites.  - materials.  1-14. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2017).  electrical properties of extruded milled carbon fibre and polypropylene.  - journal of composite materials.  3187-3195. 

tayser sumer gaaz , abu bakar sulong , abdul amir h. kadhum , mohamed h. nassir , ahmed a. al-amiery.  (2017).  absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by taguchi and anova approaches.  - results in physics.  3287-3300. 

nur fawwaz asri, teuku husaini, abu bakar sulong, edy herianto majlan, wan ramli wan daud.  (2017).  coating of stainless steel and titanium bipolar plates for anticorrosion in pemfc: a review.  - international journal of hydrogen energy.  9135-9148. 

majid niaz akhtar, a. rahman, a.b. sulong, muhammad azhar khan.  (2017).  structural, spectral, dielectric and magnetic properties of ni0.5mgxzn0.5-xfe2o4 nanosized ferrites for microwave absorption and high frequency applications.  - ceramics international.  4357-4365. 

r.e. rosli, a.b. sulong, w.r.w. daud, m.a. zulkifley, t. husaini, m.i. rosli, e.h. majlan, m.a. haque.  (2017).  a review of high-temperature proton exchange membrane fuel cell (ht-pemfc) system.  - international journal of hydrogen energy.  9293-9314. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al amiery.  (2017).  optimizing physio mechanical properties of halloysite reinforced polyurethane nanocomposites by taguchi approach.  - science of advanced materials.  1-13. 

nabilah afiqah mohd radzuan,mohd yusuf zakaria, abu bakar sulong,jaafar sahari.  (2017).  the effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites.  - composites part b : engineering.  153-160. 

m. ahsanul haque , a.b. sulong, k.s. loh, e. herianto majlan,t. husaini, r. emilia rosli.  (2017).  acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: a review.  - international journal hydrogen energy.  9156-9179. 

nabilah afiqah mohd radzuan, abu bakar sulong, jaafar sahari.  (2017).  a review of electrical conductivity models for conductive polymer composite.  - international journal of hydrogen energy.  9262-9273. 

majid niaz akhtar, abu bakar sulong , mukhtar ahmad, muhammad azhar khan,akbar ali, m.u. islam.  (2016).  impacts of gdece on the structural, morphological and magnetic properties of garnet nanocrystalline ferrites synthesized via solegel route.  - journal of alloys and compounds.  486-495. 

majid niaz akhtar, abu bakar sulong, saniah ab karim, che husna azhari, mr raza.  (2016).  evaluation of thermal, morphological and mechanical properties of pmma/nacl/dmf electrospun nanofibers: an investigation through surface methodology approach.  - iranian polymer journal.  1025-1038. 

tayser sumer gaas, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al amiery.  (2016).  optimizing injection molding parameters of different halloysites type reinforced thermoplastic polyurethane nanocomposites via taguchi complemented with anova.  - materials.  1-19. 

muhammad rafi raza, faiz ahmad, norhamidi muhamad , abu bakar sulong , m.a. omar,majid niaz akhtar, muhammad aslam.  (2016).  effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 l stainless steel.  - powder technology.  135-142. 

majid niaz akhtara, abu bakar sulong, m.k. fadzly radzi, n.f. ismail, m.r. razab, norhamidi muhamad, muhammad azhar khan.  (2016).  influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications.  - progress in natural science: materials international.  657-664. 

majid niaz akhtar, abu bakar sulong, muhammad azhar khan, mukhtar ahmad, ghulam murtaza, m.r. raza, r. raza, m. saleem, m. kashiff.  (2016).  structural and magnetic properties of yttrium iron garnet (yig) and yttrium aluminum iron garnet (yaig) nanoferrites prepared by microemulsion method.  - journal of magnetism and magnetic materials.  425-431. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al-amiery.  (2016).  impact of sulfuric acid treatment of halloysite on physico-chemic property modification.  - materials.  1-16. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2015).  powder injection molding of ha ti6al4v composite using palm stearin as based binder for implant material.  - material and design.  1028-1034. 

mohd yusuf zakaria, abu bakar sulong, jaafar sahari, hendra suherman,.  (2015).  effect of the addition of milled carbon fiber as a secondary filler on the electrical conductivity of graphite/epoxy composites for electrical conductive materials.  - composite part b.  75-80. 

fayyaz a., muhamad n., sulong a.b., yunn h.s., amin s.y.m., rajabi j..  (2015).  micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties.  - ceramics international.  3605-3612. 

eshkoor r.a., ude a.u., sulong a.b., zulkifli r., ariffin a.k., azhari c.h..  (2015).  energy absorption and load carrying capability of woven natural silk epoxy - triggered composite tubes.  - composites part b: engineering.  10-18. 

s.a. muhammed ali, ros emilia rosli, andanastuti muchtar, abu bakar sulong, mahendra rao somalu, edy herianto majlan.  (2015).  effect of sintering temperature on surface morphology and electrical properties of samarium-doped ceria carbonate for solid oxide fuel cells.  - ceramics international.  1323-1332. 

s.y. heng, m.r. raza, n. muhamad, a.b. sulong, a. fayyaz.  (2014).  micro powder injection molding (upim) of tungsten carbide.  - international journal of refractory metals and hard materials.  45:189-195. 

r.a. eshkoor, a.u. ude, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2014).  failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism.  - international journal of impact engineering.  53-61. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, javad rajabi, yee ning wong.  (2014).  fabrication of cemented tungsten carbide components bymicro-powder injection moulding.  - journal of materials processing technology.  214:1436-1444. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2014).  the effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part.  - materials and design.  223-232. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  material processing of hydroxyapatite and titanium alloy (ha/ti) composite as implant materials using powder metallurgy: a review.  - materials and design.  55:165-175. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2013).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  39(3):2665-2674. 

muhammed ali s. a., andanastuti muchtar, abu bakar sulong, norhamidi muhamad, edy herianto majlan.  (2013).  influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells.  - ceramics international.  39(5):5813-5820. 

hendra suherman, jaafar sahari, abu bakar sulong.  (2013).  effect of small-sized conductive filler on the properties of an epoxy composite for a bipolar plate in a pemfc.  - ceramics international.  39(6):7159-7166. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes.  - composites part b: engineering.  55:5-10. 

hendra suherman, abu bakar sulong, jaafar sahari.  (2013).  effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte......  - ceramics international.  39(2):1277-1284. 

shye yunn heng, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, sri yulis m. amin.  (2013).  effect of sintering temperature on the mechanical and physical properties of wc-10%co through micro-powder injection molding (mpim).  - ceramics international.  39:4457-4464. 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes.  - materials and design.  47:248-257. 

abu bakar sulong, mohd ikram ramli, seow liang hau, jaafar sahari, norhamidi muhamad, hendra suherman.  (2013).  rheological and mechanical properties of carbon nanotube/graphite/ss316l/polypropylene nanocomposite for a conductive polymer composite.  - composite: part b.  50:54-61. 

royan, nishata rajendran royan; sulong, abu bakar; sahari, jaafar; suherman, hendra.  (2013).  effect of acid- and ultraviolet/ozonolysis-treated mwcnts on the electrical and mechanical properties of epoxy nanocomposites as bipolar plate applications.  - journal of nanomaterials.  Art no.717459. 

qian wen yeang, sharif hussein sharif zein, abu bakar sulong, soon huat tan.  (2013).  comparison of the pervaporation performance of various types of carbon nanotube-based nanocomposites in the dehydration of acetone.  - separation and purification technology.  107:252-263. 

eghbal hakimian, abu bakar sulong.  (2012).  analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the taguchi method.  - materials and design.  42:62-71. 

amirhossein mansourighasri, n. muhamad, a. b. sulong.  (2012).  processing titanium foams using tapioca starch as a space holder.  - journal of materials processing technology.  212:83-89. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2012).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  2665-2674. 

sulong, a.b, park, j , azhari, c.h , jusoff, k.  (2011).  process optimization of melt spinning and mechanical strength enhancement of functionalized multi-walled carbon nanotubes reinforcing polyethylene fibers.  - composites part b-engineering.  42(1):11-17.