faridzah jamaluddin,nizaroyani saibani ,siti maisarah mohd pisal ,dzuraidah abd wahab,hawa hishamuddin ,zainuddin sajuri, rasyikah md khalid.  (2022).  end-of-life vehicle management systems in major automotive production bases in southeast asia: a review.  - sustainability.  1-23. 

amir hossein baghdadi, zainuddin sajuri, azadeh keshtgar, nurulakmal mohd sharif and armin rajabi.  (2022).  mechanical property improvement in dissimilar friction stir welded al5083/al6061 joints: effects of post-weld heat treatment and abnormal grain growth.  - materials.  1-14. 

armin rajabi, peter hodgson, mariyam j. ghazali, zainuddin sajuri, alireza almaslow, hamid ahmad mehrabi, amir hossein baghdadi.  (2022).  challenges and solutions in the synthesis of nano-ticn: a review.  - ceramic international.  8921-8929. 

ali ebrahimzadeh pilehrood, amirhossein mashhuriazar, amir hossein baghdadi, zainuddin sajuri, and hamid omidvar.  (2021).  effect of laser metal deposition parameters on the characteristics of stellite 6 deposited layers on precipitation-hardened stainless steel.  - materials.  1-14. 

amirhossein mashhuriazar, c. hakan gur, zainuddin sajuri, hamid omidvar.  (2021).  effects of heat input on metallurgical behavior in haz of multi-pass and multi-layer welded in-939 superalloy.  - journal of materials research & technology.  1590-1603. 

a.m. aziz, m.z. omar, z. sajuri.  (2021).  strength of thixoformed a319 alloy at elevated temperature.  - metals and materials international.  2416-2429. 

junaidi syarif, mohammad h. yousuf, zainuddin sajuri, amir hossein baghdadi, mahdi merabtene and mohd zaidi omar.  (2020).  effect of partial solution treatment temperature on microstructure and tensile properties of 440c martensitic stainless steel.  - metals.  1-14. 

zainuddin sajuri, nor fazilah mohamad selamat, amir hossein baghdadi, armin rajabi, mohd zaidi omar, amir hossein kokabi and junaidi syarif.  (2020).  cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded aa5083.  - metals.  1-16. 

ali ebrahimzadeh pilehrood, hamid omidvar, ali shamsipur, zainuddin sajuri.  (2020).  influence of transient liquid phase bonding followed by homogenization on the fatigue lifetimes of inconel 738 at elevated temperature.  - journal of manufacturing processes.  348-358. 

fadzilah adnan, zainuddin sajuri, amir hossein baghdadi, mohd zaidi omar.  (2020).  effects of rapid heating and uniaxial loading on the phase transformation and mechanical properties of direct partial remelted butt joint of aisi d2 tool steel.  - materials science & engineering a.  1-12. 

m. a. m. arif, m. z. omar, z. sajuri, m. s. salleh.  (2020).  effects of cu and mg on thixoformability and mechanical properties of aluminium alloy 2014.  - transactions of nonferrous metals society of china.  275-287. 

amirhossein mashhuriazar, hamid omidvar, zainuddin sajuri, c. hakan gur and amir hossein baghdadi.  (2020).  effects of pre-weld heat treatment and heat input on metallurgical and mechanical behaviour in haz of multi-pass welded in-939 superalloy.  - metals.  1-17. 

amir hossein baghdadi, zainuddin sajuri, mohd zaidi omar and armin rajabi.  (2020).  friction stir welding parameters: impact of abnormal grain growth during post weld heat treatment on mechanical properties of al-mg-si welded joints.  - metals.  1-18. 

amir hossein baghdadi, armin rajabi, nor fazilah mohamad selamat, zainuddin sajuri, mohd zaidi omar.  (2019).  effect of post-weld heat treatment on the mechanical behavior and dislocation density of friction stir welded al6061.  - materials science & engineering a.  728-734. 

nora osman, zainuddin sajuri, amir hossein baghdadi and mohd zaidi omar.  (2019).  effect of process parameters on interfacial bonding properties of aluminium copper clad sheet processed by multi-pass friction stir welding technique.  - metals.  1-19. 

amir hossein baghdadi, zainuddin sajuri, nor fazilah mohamad selamat, mohd zaidi omar, yukio miyashita, and amir hossein kokabi.  (2019).  effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of mg and al alloys.  - international journal of minerals, metallurgy and materials.  1285-1298. 

hend ali omar, nur izzi md. yusoff, halil ceylan, irman abdul rahman, zainuddin sajuri, fauzan mohd jakarni, amiruddin ismail.  (2018).  determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods.  - construction and building materials.  391-402. 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, wan fathul hakim zamri, mohd zaidi omar and zainuddin sajuri.  (2018).  experimental and numerical investigation on the layering configuration effect to the laminated aluminium/steel panel subjected to high speed impact test.  - metals.  . 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri, wan fathul hakim wan zamri and mohd faizal abdullah.  (2018).  brazed joint interface bonding strength of ar500 steel and aa7075 aluminium alloy.  - metals.  . 

j. a. wahab,m. j. ghazali, z. sajuri, y. otsuka, m. jayaprakash, s. nakamura, a. f. s. baharin.  (2017).  effects of micro-grooves on tribological behaviour of plasma-sprayed alumina-13%titania coatings.  - ceramic international.  6410-6416. 

hend ali omar, nur izzi md. yusoff, zainuddin sajuri, halil ceylan, fauzan mohd jakarni and amiruddin ismail.  (2016).  determining the effects of ageing on halloysite nano-tube modified binders through the pull-off test method.  - construction and building materials.  245-252. 

j. a. wahab, m. j. ghazali, w. m. w. yusoff and z. sajuri.  (2016).  enhancing material performance through laser surface texturing: a review.  - transactions of the imf.  193-198. 

hend ali omar, nur izzi md. yusoff, halil ceylan, zainuddin sajuri, fauzan mohd jakarni, amiruddin ismail.  (2016).  investigation of the relationship between fluidity and adhesion strength of unmodified and modified bitumens using the pull-off test method.  - construction and building materials.  140-148. 

j. syarif, t.n. rohmannudin, m.z. omar, z. sajuri, s. harjanto.  (2013).  stability of the beta phase in ti-mo-cr alloy fabricated by powder metallurgy.  - journal of mining and metallurgy,section b:metallurg.  49(3)B:285-292. 

wan nur azrina wan muhammad, zainuddin sajuri, yoshiharu mutoh, yukio miyashita.  (2011).  microstructure and mechanical properties of magnesium composites prepared by spark plasma sintering technology.  - journal of alloys and compounds.  509(20):6021-6029.