jingchuan tang, mohd zaidi omar, ripeng jiang, and intan fadhlina mohamed.  (2025).  effect of tib2 on the microstructure and mechanical properties of tib2/al-5cu matrix composites.  - jom.  1064 - 1078. 

jingchuan tang, mohd zaidi omar, ripeng jiang, intan fadhlina mohamed, anqing li.  (2025).  effect of different ultrasonic power on microstructure and mechanical properties of zl205a/tib2 composite materials.  - metals and materials international.  890 - 906. 

ahmad muhammad aziz, mohd. zaidi omar , saziana samat, intan fadhlina mohamed, mohd. rhafiq mazlan, mohammad azlan aripin.  (2024).  microstructural characterisation and high-cycle fatigue behaviour of semisolid al–si–cu alloy.  - international journal of metalcasting.  2612 - 2623. 

aziz a.m., omar m.z., samat s., mohamed i.f., sajuri z., baghdadi a.h..  (2024).  microstructural and tensile behavior of a thixoformed al–si–cu–mg given t5 and t6 heat treatments tested at room and elevated temperatures.  - international journal of metalcasting.  2343 - 2356. 

ahmad muhammad aziz, intan fadhlina mohamed, zenji horita, mohd zaidi omar, zainuddin sajuri, norinsan kamil othman, junaidi syarif, mohamed abdelgawad gebril, farhad ostovan, seungwon lee, kenji matsuda, manabu yumoto, yoichi takizawa, ammar abdulkareem.  (2024).  strengthening of a5052 aluminum alloy by high-pressure sliding process.  - journal of materials science.  5754-5770. 

afifah md ali, mohd zaidi omar, intan fadhlina mohamed, mohd shukor salleh, hanizam hashim, nur farah bazilah wakhi anuar.  (2024).  effect of heat treatment on the microstructures and mechanical properties of thixoformed graphene-reinforced aluminium alloy composite.  - international journal of metalcasting.  1695-1709. 

mohd rhafiq mazlan, nashrah hani jamadon, armin rajabi, abu bakar sulong, intan fadhlina mohamed, farazila yusof, nur ayuni jamal.  (2023).  necking mechanism under various sintering process parameters - a review.  - journal of materials research and technology - jmr&t.  2189-2201. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, dawod mohamed elabar, farag ibrahim haider, saziana samat and osama m. irfan.  (2023).  effect of semisolid and heat treatment process on microstructural refinement of al-7si alloy.  - materials.  1-13. 

takahiro masuda, yongpeng tang, intan fadhlina mohamed, zenji horita.  (2023).  ultrafine-grained az61 alloy produced by high-pressure torsion: advent of superplasticity and effect of anisotropy.  - materials science and engineering: a.  1-9. 

nuramilawahida mat ropi, hawa hishamuddin, dzuraidah abd wahab, wakhid ahmad jauhari, fatin amrina a. rashid, nor kamaliana khamis, intan fadhlina mohamed, mohd anas mohd sabri, mohd radzi abu mansor.  (2023).  optimal lot-sizing decisions for a remanufacturing production system under spare parts supply disruption.  - mathematics.  4053-4072. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, ahmad muhammad aziz, osama m. irfan.  (2023).  the microstructural refinement of the a356 alloy using semi-solid and severe plastic-deformation processing.  - metals.  1-24. 

junaidi syarif, amro altoyuri, intan fadhlina mohamed.  (2022).  equal channel angular pressing of single crystal aluminum: a molecular dynamics simulation.  - journal of materials research and technology.  888-897. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  combining heat treatment and high-pressure torsion to enhance the hardness and corrosion resistance of a356 alloy.  - metals.  1-12. 

afifah md ali, mohd zaidi omar, mohd shukor salleh, hanizam hashim, intan fadhlina mohamed, nur farah bazilah wakhi anuar.  (2022).  mechanical behaviour and morphology of thixoformed aluminium alloy reinforced by graphene.  - materials.  1-15. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, junaidi syarif, intan fadhlina mohamed and ahmad muhammad aziz.  (2022).  effects of build orientations on microstructure evolution, porosity formation, and mechanical performance of selective laser melted 17-4 ph stainless steel.  - metals.  1-24. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  microstructure refinement by a combination of heat treatment and thixoforming process followed by severe plastic deformation and their effects on al-si alloy hardness.  - metals.  1-15. 

saziana samat, mohd zaidi omar, amir hossein baghdadi, intan fadhlina mohamed, ahmad muhammad aziz.  (2021).  mechanical properties and microstructures of a modified al-si-cu alloy prepared by thixoforming process for automotive connecting rods.  - journal of materials research and technology.  1086-1102. 

s. samat, m.z. omar, a.h. baghdadi, i.f. mohamed, a. rajabi, a.m. aziz.  (2021).  microstructural evolution, dislocation density and tensile properties of al-6.5si-2.1cu-0.35mg alloy produced by different casting processes.  - journal of materials science and technology.  145-157. 

farhad ostovan, ehsan shafiei, meysam toozandehjani, intan fadhlina mohamed, masoud soltani.  (2021).  on the role of molybdenum on the microstructural,mechanical and corrosion properties of the gtawaisi 316 stainless steel welds.  - journal of materials research and technology.  2115-2125. 

esmaeil amiri, farhad ostovan, meysam toozandehjani, ehsan shafiei, intan fadhlina mohamed.  (2021).  study and selection of most appropriate filler rod for gtaw of s32750 super duplex steel joints: a comprehensive study on microstructural, mechanical and corrosion properties.  - materials chemistry and physics.  1-12. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman.  (2019).  microstructural evaluation and corrosion resistance of semisolid cast a356 alloy processed by equal channel angular pressing.  - metals.  1-15. 

intan fadhlina mohamed, takahiro masuda, seungwon lee, kaveh edalati, zenji horita, shoichi hirosawa, kenji matsuda, daisuke terada, mohd zaidi omar.  (2017).  strengthening of a2024 alloy by high pressure torsion and subsequent aging.  - journal of materials science and engineering a.  112-118.