farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, nashrah hani jamadon & minhalina ahmad buhairi.  (2025).  4d printing of shape memory alloy with selective laser melting (slm): a brief review.  - lecture notes in mechanical engineering.  241 - 246. 

mohd azwan ahmad, nurul izzati muhamad rasid, norhamidi muhamad, nur azalina suzianti feisal, nashrah hani jamadon.  (2025).  enhancing copper-graphene composites for sustainable industry applications.  - materials science forum.  9 - 14. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nashrah hani jamadon & nabilah afiqah mohd radzuan.  (2025).  microstructural evolution and performance of heat-treated ti6al4v in laser powder bed fusion.  - sains malaysiana.  2045 - 2057. 

abdul hadi azman, shahrum abdullah, mohd zaidi omar, wan fathul hakim wan zamri, norhamidi muhamad, mohd sabirin rahmat, nurhasyimah abdul aziz, rizauddin ramli .  (2025).  fostering innovation in product development within mechanical engineering through integrated design thinking .  - peka 2025.  . 

al basir, abu bakar sulong, norhamidi muhamad, afifah z. juri, nashrah hani jamadon , farhana mohd foudzi , nabilah afiqah mohd radzuan, kambiz rashidi.  (2024).  influence of ss316l nanoparticles on the sintered properties of two-component micro-powder injection moulded bimodal ss316l/zirconia bi-materials.  - materials.  1 - 22. 

tareq ali al ameeri, mohd nizam ab rahman, norhamidi muhamad.  (2024).  enhanced framework to mitigate maintenance strategy failure of electric power plant during crises.  - journal of infrastructure policy and development.  1 - 13. 

saad ali, faiz ahmad, puteri sri melor megat yusoff, norhamidi muhamad, khurshid malik, chowdhury ahmed shahed .  (2024).  mechanical properties’ investigation of ag decorated graphene nanoplatelets and ag decorated n-doped graphene nanoplatelets reinforced cu composites.  - advanced powder technology.  1 - 18. 

muhammad mohamed amin, norhamidi muhamad, abu bakar sulong, al basir & nur aisyah miza ahmad tamizi.  (2024).  flowability and moldability of zirconia micro-part via micro-powder injection molding.  - jurnal kejuruteraan.  2107 - 2114. 

al basir, norhamidi muhamad, abu bakar sulong, mohammad fadhli izuddin bin mohd nor, muhammad bin mohamed amin & nashrah hani jamadon.  (2024).  moldability and solvent debinding of hydroxyapatite micro-part processed through micro-powder injection molding.  - jurnal kejuruteraan.  399 - 405. 

al basir, abu bakar sulong, norhamidi muhamad, afifah z. juri, nashrah hani jamadon, farhana mohd foudzi, nabilah afiqah mohd radzuan.  (2024).  debinding of yttria stabilised zirconia bimodal stainless steel 316l bi materials produced through two component micro powder injection moulding.  - polymers.  1 - 21. 

farhana mohd foudzi, lai yu hung, fathin iliana jamhari, minhalina ahmad buhairi, abu bakar sulong, norhamidi muhamad, nabilah afiqah mohd radzuan, izhar aziz, kim seah tan.  (2024).  physical and hardness performance at different surfaces for titanium alloy (ti6al4v) printed using selective laser melting process (slm).  - jurnal kejuruteraan.  1217 - 1226. 

farhana mohd foudzi, moey kah min, fathin iliana jamhari, minhalina ahmad buhairi, abu bakar sulong, norhamidi muhamad, nabilah afiqah mohd radzuan, izhar aziz, kim seah tan.  (2024).  kesan tanpa masa pegangan rawatan haba ke atas sifat mekanikal dan mikrostruktur pembuatan aditif aloi titanium (ti6al4v) melalui proses peleburan laser selektif (slm).  - jurnal kejuruteraan.  1207 - 1215. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, and kim seah tan.  (2024).  surface topography and density of ti6al4v via lpbf after heat treatment.  - proceedings of the 9th international conference and exhibition on sustainable energy and advanced materials ice-seam 2023, putrajaya, malaysia.  569 - 573. 

nur aisyah miza ahmad tamizi, abu bakar sulong, norhamidi muhamad, mohd ikram ramli.  (2024).  viscosity analysis of copper aluminium manganese (cualmn) shape memory alloy mixed with polyethylene glycol peg polymethyl methacrylate acrylic (pmma) and stearic acid (sa) based binder.  - jurnal kejuruteraan.  761 - 768. 

kambiz rashidi, abu bakar sulong, norhamidi muhamad, abdolali fayyaz, farhana mohd foudzi, al basir.  (2024).  martensitic transformation characteristics, mechanical properties and damping behavior of cualni shape memory alloys: a review of their modifications and improvements.  - journal of materials research and technology.  2732-2749. 

norhamidi bin muhamad;che hassan bin che haron;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan.  (2024).  investigation of sintering mechanism of yttria-stabilized zirconia and hydroxyapatite bi-material micro-components produced by two-component micro-powder injection moulding.  - .  . 

nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid;farhana binti mohd foudzi.  (2024).  mechanism of anticipating diffusion and delamination on fibre oriented additive manufactured polyamide/carbon fibre composite filament.  - .  . 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, abdul hadi azman, wan sharuzi wan harun, msh al-furjan.  (2023).  review on volumetric energy density: influence on morphology and mechanical properties of ti6al4v manufactured via laser powder bed fusion.  - progress in additive manufacturing.  265-283. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;farhana binti mohd foudzi.  (2023).  bonding of polyamide reinforced carbon fibre via additive manufacturing.  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;mohd. zaidi bin omar;zainuddin bin sajuri;nabilah afiqah binti mohd radzuan;mohd ikram bin ramli.  (2023).  mechanism in processability of copper-aluminium-manganese shape memory alloys (smas) through powder injection moulding (pim).  - .  . 

al basir, norhamidi muhamad, abu bakar sulong, nashrah hani jamadon, farhana mohd foudzi.  (2023).  recent advances in processing of titanium and titanium alloys through metal injection molding for biomedical applications: 2013-2022.  - materials.  1-33. 

tareq ali al ameeri, mohd nizam ab rahman, norhamidi muhamad.  (2023).  analysing effective and ineffective impacts of maintenance strategies on electric power plants: a comprehensive approach.  - energies.  1-11. 

al basir, norhamidi muhamad, abu bakar sulong, muhammad bin mohamed amin, nashrah hani jamadon, nabilah afiqah mohd radzuan.  (2023).  micro-injection molding and debinding behavior of hydroxyapatite/zirconia bi-materials fabricated by two-component micro powder injection molding process.  - materials.  1-18. 

muhammad mohamed amin, nur syamimi zainal adelin, abu bakar sulong, norhamidi muhamad.  (2023).  rheological analysis of zirconia hydroxyapatite with bimodal system of binders low density polyethylene and palm stearin.  - international journal of integrated engineering.  179 - 188. 

izdihar tharazi, farah atiqah abdul azam, norhamidi muhamad, david hui, abu bakar sulong and milan gaff.  (2023).  effect of fiber orientation and elevated temperature on the mechanical properties of unidirectional continuous kenaf reinforced pla composites.  - reviews on advanced materials science.  1 - 13. 

tareq ali al ameeri, mohd nizam bin ab rahman and norhamidi bin muhamad.  (2023).  maintenance management cost analysis using strategy optimization for electric power plant.  - journal of engineering and science research.  1 - 8. 

saad ali, faiz ahmad, puteri sri melor megat yusoff, norhamidi muhamad, waseem haider, khurshid malik, chowdhury ahmed shahed .  (2023).  interface and mechanical properties of graphene/copper composite with sonication induced au decoration of graphene.  - powder technology.  1 - 18. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2022).  sintering behavior of bi-material micro-component of 17-4ph stainless steel and ysintering behavior of bi-material micro-component of 17-4ph stainless steel and yttria-stabilized zirconia produced by.  - materials.  1-13. 

hedaiat moradpoor, hossein mohammadi, mohsen safaei, hamid reza mozaffari, roohollah sharifi, pourya gorji, abu bakar sulong, norhamidi muhamad, mona ebadi.  (2022).  recent advances on bacterial cellulose-based wound management: promises and challenges.  - international journal of polymer science.  1-24. 

aditya reza haswendra, amir arifin, abu bakar sulong, norhamidi mohamad, gunawan and barlin.  (2022).  human-centered technology for a better tomorrow.  - human engineering symposium, humens 2021 (lecture notes in mechanical engineering).  289-297. 

norhamidi bin muhamad;mohd. zaidi bin omar;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi.  (2022).  effect of metal-ceramic (bi-material) on inter-surface bonding by micro co-powder injection molding.  - .  . 

norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  - .  . 

nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad.  (2022).  layup sequence and interfacial bonding of additively manufactured polymeric composite.  - 6th postgraduate colloquium for environmental research 2022 (pocer 2022).  16-17. 

farhana binti mohd foudzi;norhamidi bin muhamad;abu bakar bin sulong.  (2022).  effect of heat treatment on the performance of additive manufactured titanium alloy via selective laser melting.  - .  . 

abdul hadi azman, shahrum abdullah, mohd. zaidi omar, norhamidi muhamad, dzuraidah abd.wahab, zambri harun, wan fathul hakim wan zamri.  (2022).  development of a virtual platform to exhibit design project prototypes.  - prosiding knovasi 2022.  267-268. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, ukwueze bonaventure emeka.  (2021).  process parameters used in macro/micro powder injection molding: an overview.  - metals and materials international.  2023-2045. 

hossein mohammadi, norhamidi muhamad, abu bakar sulong, mohsen ahmadipour.  (2021).  recent advances on biofunctionalization of metallic substrate using ceramic coating: how far are we from clinically stable implant?.  - journal of the taiwan institute of chemical engineers.  254-270. 

mohd yusuf zakaria, mohd ikram ramli, abu bakar sulong, norhamidi muhamad, muhammad hussain ismail.  (2021).  application of sodium chloride as space holder for powder injection molding of alloy titanium - hydroxyapatite composites.  - journal of materials research and technology.  478-486. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong & kok yih shia.  (2021).  production of porous stainless steel using the space holder method.  - sains malaysiana.  507-514. 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong, nabilah afiqah mohd radzuan, mohd ramdhan mohd khalid, mohd rizal ahmad, mohd ikmal hafizi azaman, ahmad syazwan ramli, mohd azwan mohd bakri.  (2021).  problems and constraints involved in the injection moulding process of biocomposites: a review.  - advances in agricultural and food research journal.  1-14. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2021).  feedstock properties and debinding mechanism of yttria-stabilized zirconia/ stainless steel 17-4ph micro-components fabricated via two-component micro-powder injection molding process.  - ceramics international.  20476-20485. 

abu bakar bin sulong;che hassan bin che haron;norhamidi bin muhamad;nabilah afiqah binti mohd radzuan.  (2021).  kesan penambahan bahan nano terhadap ketahanan mekanikal dan fizikal kenaf polimer komposit bagi aplikasi automotif.  - .  . 

mariyam jameelah binti ghazali;norhamidi bin muhamad;intan fadhlina binti mohamed.  (2021).  facile in-situ casting technique of fe-tic for industries.  - .  . 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, wan sharuzi wan harun, mohannad saleh hammadi al-furjan.  (2021).  effect of energy density on properties of additive manufactured ti6al4v via slm.  - international conference on powder metallurgy and particulate materials (powdermet2021).  434-448. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong.  (2021).  seramik nano: revolusi produk mikro.  - .  173. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

mohd syuhaimi ab rahman, najib adun, norhamidi muhamad, farah farzana rasol, iszan hana kaharudin,.  (2021).  ukm bantu mangsa banjir di pahang.  - fikrah pahang.  1. 

saad ali, faiz ahmad, puteri sri melor megat yusoff, norhamidi muhamad, eugenio onate, muhammad rafi raza, khurshid malik.  (2021).  a review of graphene reinforced cu matrix composites for thermal management of smart electronics.  - composites part a.  1-25. 

hossein mohammadi, mohammad majid sepantafar, norhamidi muhamad, abu bakar sulong.  (2021).  how does scaffold porosity conduct bone tissue regeneration?.  - advanced engineering materials.  1-19. 

norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;andanastuti muchtar;roslinda binti shamsudin;ng min hwei.  (2020).  tajuk program: metal-ceramic composite: a new generation material for bone implant tajuk projek: effect of processing parameters on novel metal-ceramic composite through powder injection molding.  - .  . 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, najlaa nazihah masood, etta eshak.  (2020).  moldability of nano size zirconia for powder injection molding process by using peg and pmma binders.  - jurnal kejuruteraan.  335-340. 

farah 'atiqah abdul azam, zakaria razak, mohd khairul fadzly md radzi, norhamidi muhammad, che hassan che haron, and abu bakar sulong.  (2020).  influence of multiwalled carbon nanotubes on the rheological behavior and physical properties of kenaf fiber reinforced polypropylene composites.  - polymers.  1-13. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, intan fadhlina mohameda & mohannad saleh hammadi al-furjan.  (2020).  debinding process of co-powder injection molded (2c-pim) ss17-4ph and ss316l.  - jurnal kejuruteraan.  49-53. 

mohd ikram ramli, farhana mohd foudzi, abu bakar sulong, fatin aqilah abdul yazid, norhamidi muhamad, david hui.  (2020).  characterization of titanium alloy-hydroxyapatite composite through powder injection molding.  - jurnal kejuruteraan.  177-184. 

tant koon tatt, norhamidi muhamad, che hassan che haron, abu bakar sulong.  (2020).  parametric optimization of metal injection moulding process using taguchi method.  - the international journal of integrated engineering.  210-219. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2020).  bi-material micro-part of stainless steel and zirconia by two-component micro-powder injection molding: rheological properties and solvent debinding behavior.  - metals.  1-17. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, farrahshaida mohd salleh.  (2019).  the study of sintering behavior of stainless steel 17-4ph-stainless steel 316l for two materials powders injection molding (2c-pim) process.  - journal of mechanical engineering.  67-77. 

dulina tholibon, izdihar tharazi, abu bakar sulong, norhamidi muhamad, nur farhani ismail, mohd khairul fadzly md radzi ,nabilah afiqah mohd radzuan, david hui.  (2019).  kenaf fiber composites: a review on synthetic and biodegradable polymer matrix.  - jurnal kejuruteraan.  65-76. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, mohd ikram ramli.  (2019).  rheological properties of titanium-hydroxyapatite with powder space holder composite feedstock for powder injection moulding.  - international journal of advanced manufacturing technology.  2591-2599. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2019).  effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process.  - ceramics international.  11648-11653. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, seong jin park.  (2019).  processing of stainless steel (ss316l)-hydroxyapatite (ha) powder composite through powder injection molding.  - iop conference series: journal of physics: conference series.  1-6. 

norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid.  (2019).  advanced copper/graphene composite for thermal management application using a sustainable powder injection moulding process.  - .  . 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering.  . 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, muhammad rafi raza, mohd ikram ramli.  (2019).  incorporation of wollastonite bioactive ceramic with titanium for medical applications: an overview.  - materials science & engineering c.  . 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  microstructure and physical and mechanical properties of micro cemented carbide injection.  - powder technology.  151-158. 

norhamidi muhamad, khairul nizam abdul maulud , ahmad abas kutty, mohd ekhwan hj. toriman, wan juliana wan ahmad , shahrir abdullah, mohd. hasni jaafar, nor ghani md nor, wan zuhairi wan yaacob, jasni yaakub, othman jaafar, maimon abdullah & md pauzi.  (2018).  the proposed nenggiri hydroelectric project, jajahan gua musang, kelantan darul naim.  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;andanastuti muchtar;syarif junaidi bin sjarifuddin djalil.  (2018).  powder co-injection molding (2c-pim) of hybrid metal-ceramic powders.  - .  . 

norhamidi muhamad, ahmad abas kutty,khairul nizam abdul maulud, md. pauzi abdullah, shahrir abdullah, maimon abdullah, amiruddin ismail, mohd. ekhwan hj. toriman, mohd hasni hj jaafar, nor. ghani md. nor, wan zuhairi wan yaacob & meor zainal meor tali.  (2018).  environmental impact assessment second schedule for the kuala lumpur singapore high speed rail hsr project.  - .  . 

ukwueze, bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2018).  solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia.  - international journal of mechanical & mechatronics engineering.  . 

n.f. ismail, n. muhamad, a.b. sulong & c.h.c. haron.  (2018).  effects of alkali treatment on mechanical properties of epoxy composites reinforced kenaf fibre using compression moulding process.  - international journal of mechanical & mechatronics engineering.  . 

che hassan bin che haron;ja`afar bin sahari @ shaari;che husna bt. azhari;norhamidi bin muhamad;jaharah bt. a ghani;abu bakar bin sulong.  (2018).  machinability and moldability of high strenght kenaf polymer matrix composites.  - .  . 

najlaa nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

nor nabilla kadiman, muhammad omar abdul rashid, norhamidi muhamad dan abu bakar sulong.  (2018).  effects of sintering temperature on the physical and mechanical properties of injection-molded copper/graphene composite.  - journal of advanced manufacturing technology.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi , mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite.  - plos one.  . 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairol fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2018).  the effects of maleic anhydride grafted pp (mapp) on the mechanical properties of injection moulded kenaf/cnts/pp composites.  - sains malaysiana.  . 

nor nabilla kadiman, julie elvyana romli, norhamidi muhamad, abu bakar sulong & farhana mohd foudzi.  (2018).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  . 

zakaria razak , abu bakar sulong, norhamidi muhamad, mohd. khairul fadzly md radzi, nur farhani ismail, dulina tholibon and izdihar tharazi.  (2018).  numerical simulation analysis of wood/pp composites for injection-moulded car battery trays.  - international journal of engineering and technology(uae).  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2018).  pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit.  - sains malaysiana.  . 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  investigation on feedstock preparation for micro-cemented carbide injection molding.  - powder metallurgy progress.  96-102. 

w.s.w. harun, m.s.i.n. kamariah, n.muhamad, s.a.c. ghani, f. ahmad, z. mohamed.  (2018).  a review of powder additive manufacturing processes for metallic biomaterials.  - powder technology.  . 

mohd khairul fadzly md radzi, norhamidi muhamad, majid niaz akhtar, zakaria razak & farhana mohd foudzi.  (2018).  the effect of kenaf filler reinforcement on the mechanical and physical properties of injection moulded polypropylene composites.  - sains malaysiana.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

najla nazihah mas'ood, farhana mohd foudzi, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farrahshaida mohd salleh, ukwueze bonaventure emeka.  (2018).  two component materials in powder metallurgy: a review paper focused on the processing technique applied in powder metallurgy.  - jurnal kejuruteraan.  23-31. 

najla nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  121-125. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2017).  rheological properties of titanium alloy ti6al4v wollastonite w composite using palm stearin as based binder.  - journal of mechanical engineering.  87-96. 

nur farhani ismail, norhamidi muhamad, abu bakar sulong, che hassan che haron, dulina tholibon, izdihar tharazi, mohd khairul fadzly mdradzi, zakaria razak.  (2017).  mechanical properties of compression molded epoxy polymer composites reinforced with kenaf fibers.  - journal of mechanical engineering.  1-12. 

dulina tholibon, abu bakar sulong, norhamidi muhamad, nur farhani ismail, izdihar tharazi, mohd khairul fadzly md radzi.  (2017).  optimization of hot pressing process for unidirectional kenaf polypropylene composites by full factorial design.  - journal of mechanical engineering.  23-35. 

izdihar tharazi, norhamidi muhamad, nur farhani ismail, mohd khairul fadzly mdradzi, zakaria razak, dulina tholibun, majid niaz akhtar.  (2017).  effects of fiber content and processing parameters on tensile properties of unidirectional long kenaf fiber reinforced polylactic acid composite.  - journal of mechanical engineering.  65-76. 

zakaria razak, abu bakar sulong, norhamidi muhamad, mohd khairul fadzly mdradzi, dulina tholibon, izdihar tharazi, nur farhani ismail.  (2017).  effect of multi-walled carbon nanotube on mechanical properties of kenaf/polypropylene composites.  - journal of mechanical engineering.  107-117. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad & mohd ikram ramli.  (2017).  feedstock preparation of titanium-hydroxyapatite with temporary space holder for powder injection molding.  - advanced processes and systems in manufacturing an international conference 2016.  1-2. 

salleh f.m., sulong a.b., raza m.r., muhamad n., fhang l.t..  (2017).  effects of space holder on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding.  - sains malaysiana.  . 

m. i. ramli, a. b. sulong, n. muhamad, a. muctar, m. h. ng, l. shanmuganantha, m. y. zakaria.  (2017).  ti6al4v/wollastonite composite through powder injection molding process for bone implant application.  - international medical device and technology conference 2017.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad & jaharah a. ghani.  (2017).  kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik.  - sains malaysiana.  1979-1986. 

salleh, f.m., sulong, a.b., raza, m.r., muhamad,n., fhang, l.t.  (2017).  effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding.  - sains malaysiana.  1651-1657. 

raza, m.r., ahmad, f., muhamad, n., sulong, a.b., omar, m.a., akhtar, m.n., aslam, m., sherazi, i..  (2017).  effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 l - stainless steel.  - sains malaysiana.  285-293. 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong & zakaria razak.  (2017).  optimizing injection parameters of kenaf filler polypropylene composite by taguchi method.  - 1st international conference on frontiers of composite materials, icfcm 2016.  . 

n emira binti azaman, m rafi raza, n muhamad, m niaz akhtar & a bakar sulong.  (2017).  rheological study of copper and copper grapheme feedstock for powder injection molding.  - 2nd international conference on rheology and modeling of materials, ic-rmm 2015 (journal of physics: conference series).  . 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri & farrahshaida salleh.  (2017).  two component injection moulding of bimaterial of stainless steel and yttria stabilized zirconia green part.  - jurnal kejuruteraan.  49-55. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2017).  the characterization and rheological investigation of materials for powder injection molding.  - journal of mechanical engineering.  97-107. 

ahmad,r.n., muhamad,n., sulong, a.b., wahi, a., salleh, f.m..  (2017).  rheological properties of titanium niobium based feedstocks for metal injection molding.  - journal of mechanical engineering.  139-149. 

tharazi, i., sulong, a.b., muhamad, n., haron, c.h.c., tholibon, d., ismail., n.f., radzi, m.k.f.m., razak, z..  (2017).  optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - advances in material and processing technologies conference, ampt 2017 (procedia engineering).  . 

nor nabilla kadiman, julie elbyana romli, norhamidi muhamad, abu bakar sulong, farhana mohd foudzi.  (2017).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  1039-1043. 

eric jose olmedo panal, mohd juzaiddin ab aziz, norhamidi muhamad & jimena andrea barrera chapparo.  (2016).  mission report: mission offshore programs vietnam.  - .  . 

muhammad rafi raza, faiz ahmad, norhamidi muhamad , abu bakar sulong , m.a. omar,majid niaz akhtar, muhammad aslam.  (2016).  effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 l stainless steel.  - powder technology.  135-142. 

dulina tholibon, abu bakar sulong, norhamidi muhammad, nur farhani ismail, izdihar tharazi, mohd khairul fadzly md radzi.  (2016).  tensile properties of unidirectional kenaf fiber polypropylene composite.  - jurnal teknologi.  101-106. 

mohd khairul fadzly md radzi, abu bakar sulong, baharuddin mohd zanggi, norhamidi muhammad.  (2016).  mouldability of wood filler reinforced polypropylene composite for injection moulded engine cover using mould filing simulation.  - jurnal teknologi.  75-81. 

tatt t.k., muhamad n., muchtar a., sulong a.b., cherng n.m..  (2016).  influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method.  - sains malaysiana.  653-658. 

wahi a., muhamad n., sulong a.b., ahmad r.n..  (2016).  effect of sintering temperature on density, hardness and strength of mim co30cr6mo biomedical alloy.  - funtai oyobi fummatsu yakin/journal of the japan society of powder and powder metallurgy.  434-437. 

mohd razali r.n., abdullah b., ismail m.h., muhamad n..  (2016).  characteristic of modified geometrical open-cell aluminium foam by casting replication process.  - materials science forum.  37-41. 

majid niaz akhtara, abu bakar sulong, m.k. fadzly radzi, n.f. ismail, m.r. razab, norhamidi muhamad, muhammad azhar khan.  (2016).  influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications.  - progress in natural science: materials international.  657-664. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar & mohd yusuf zakaria.  (2016).  powder injection molding of ti6al4v-w composite: rheological properties.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  13-14. 

mohd khairul fadzly md radzi, abu bakar sulong, norhamidi muhamad & zakaria razak.  (2016).  optimization of injection molding parameters for kenaf/pp composite using taguchi method.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

izdihar tharazi, abu bakar sulong, norhamidi muhamad, che hassan che haron, dulina tholibon, nur farhani ismail, mohd khairul fadzly md radzi & zakaria razak.  (2016).  tensile properties of unidirectional kenaf fibre reinforced polylactic-acid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

dulina tholibon, abu bakar sulong, norhamidi muhamad, nur farhani ismail, izdihar tharazi & mohd khairul fadzly md radzi.  (2016).  process optimization of unidirectional kenaf polypropylene composites by full factorial design.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

zakaria razak, abu bakar sulong, norhamidi muhamad, mohd khairul fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2016).  mechanical properties of injection moulded for multi-walled carbon nanotube/ kenaf/ polypropylene hybrid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad & zainuddin sajuri.  (2016).  rheological investigation of powder injection molding materials using polyethylene with palm stearin binder system.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

nizaroyani saibani,muhammad idham sabtu,zambri harun, wan mohamad faizal wan mahmood,norhamidi muhamad dan jaafar sahari.  (2015).  comparison of emotional intelligence scores among engineering students of an academic programme.  - journal of engineering science and technology.  41-51. 

fayyaz a., muhamad n., sulong a.b., yunn h.s., amin s.y.m., rajabi j..  (2015).  micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties.  - ceramics international.  3605-3612. 

ismail, n. f., sulong, a. b.*, muhamad, n., tholibon, d., mdradzi, m. k. f. wan ibrahim, w. a. s..  (2015).  review of the compression moulding of natural fiber reinforced thermoset composites material processing and characterisations.  - pertanika journal of science and technology.  533-547. 

md radzi m. k. f., sulong, a. b., muhamad, n., mohd latiff, m. a., and ismail, n. f..  (2015).  effect of filler loading and naoh addition on mechanical properties of moulded kenaf polypropylene composite.  - pertanika journal tropical agricultural science.  583-590. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif.  (2015).  characterization of hydroxyapatite ti6al4v composite powder under various sintering temperature.  - jurnal teknologi.  27-31. 

j. rajabi, a. b. sulong, n. muhamad, m. r. raza.  (2015).  powder compaction of bi-materials:stainless steel 316l and nanocrystaline yttria stabilized zirconia.  - materials technology.  313-320. 

wong yee ning, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2015).  effects of vanadium carbide on sintered wc-10%co produced by micro-powder injection molding.  - sains malaysiana.  1175-1181. 

muhammad rafi raza, abu bakar sulong, norhamidi muhamad, majid niaz akhtar, javad rajabi.  (2015).  effects of binder system and processing parameters on formability of porous ti/ha composite through powder injection molding.  - materials and design.  386-392. 

rajabi j., zakaria h., muhamad n., sulong a.b., fayyaz a..  (2015).  fabrication of miniature parts using nano-sized powders and an environmentally friendly binder through micro powder injection molding.  - microsystem technologies.  1131-1136. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2015).  powder injection molding of ha ti6al4v composite using palm stearin as based binder for implant material.  - material and design.  1028-1034. 

mohd nizam ab rahman, mahmood doroodian, yusniza kamarulzaman, norhamidi muhamad.  (2015).  designing and validating a model for measuring sustainability of overall innovation capability of small and medium-sized enterprises.  - sustainability.  537-562. 

norita hassan, sahrim ahmad, norhamidi muhamad,mohd afian omar and noor azlina hassan.  (2015).  the effects of various tpnr binder compositions on feedstock preparation for mim process.  - advanced materials research.  304-307. 

norita hassan ,sahrim ahmad, norhamidi muhamad,mohd afian omar and noor azlina hassan.  (2015).  morphology and mechanical properties of mim feedstock using tpnr backbone binder.  - advanced materials research.  279-285. 

abu bakar bin sulong, norhamidi bin muhamad, syarif junaidi bin sjarifuddin djalil.  (2015).  novel porous composite (titanium-hydroxyapatite): effect of powder injection molding process parameters on its formability.  - .  . 

heng s.y., raza m.r., muhamad n., sulong a.b., fayyaz a..  (2014).  micro-powder injection molding (?pim) of tungsten carbide.  - international journal of refractory metals and hard materials.  189 - 195. 

amin s.y.m., muhamad n., jamaludin k.r., fayyaz a., yunn h.s..  (2014).  characterization of the feedstock properties of metal injection-molded wc-co with palm stearin binder system.  - sains malaysiana.  123 - 128. 

zaliha wahid, norhamidi muhamad, shahrir abdullah, jaharah a. ghani.  (2014).  the influence of temperature dependant parameters in plastic 0.0nd metal injection molding using taguchi method.  - jurnal teknologi.  51-56. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2014).  the effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part.  - materials and design.  223-232. 

m. i. ramli, a. b. sulong, n. muhamad, a. muchtar and a. arifin.  (2014).  stainless steel 316l hydroxyapatite composite via powder injection moulding: rheological and mechanical properties characterisation.  - material research innovation.  100-104. 

mahmood doroodian, mohd nizam ab rahman, yusniza kamarulzaman, and norhamidi muhamad.  (2014).  designing and validating a model for measuring innovation capacity construct.  - advances in decision sciences.  1-11. 

dedikarni panuh, andanastuti muchtar, norhamidi muhamad, edy herianto majlan, wan ramli wan daud.  (2014).  elektrolit dwi lapisan sm0.2ce0.8o1.90 (sdc)/ y0.25bi0.75o1.5 (ysb) untuk sel fuel oksida pepejal bersuhu sederhana.  - sains malaysiana.  1769-1774. 

somaieh alavi, dzuraidah abd. wahab, norhamidi muhamad & behrooz arbab shirani.  (2014).  organic structure and organisational learning as the main antecedents of workforce agility.  - international journal of production research.  6273-6295. 

s.y. heng, m.r. raza, n. muhamad, a.b. sulong, a. fayyaz.  (2014).  micro powder injection molding (upim) of tungsten carbide.  - international journal of refractory metals and hard materials.  45:189-195. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, javad rajabi, yee ning wong.  (2014).  fabrication of cemented tungsten carbide components bymicro-powder injection moulding.  - journal of materials processing technology.  214:1436-1444. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  material processing of hydroxyapatite and titanium alloy (ha/ti) composite as implant materials using powder metallurgy: a review.  - materials and design.  55:165-175. 

dedikarni panuh, andanastuti muchtar, norhamidi muhamad, edy herianto majlan, wan ramli wan daud.  (2014).  fabrication of thin ag-ysb composite cathode film for intermediate temperature solid oxide fuel cells.  - composites part b-engineering.  58 (2014): 193-198. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  binder removal via a two-stage debinding process for ceramic injection molding parts.  - ceramics international.  40(2014):2819-2824. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  fabrication of zirconia-toughened alumina parts by powder injection molding process: optimized processing parameters.  - ceramics international.  40: 273-280. 

shahrum abdullah, jaharah ab ghani, norhamidi muhamad, dzuraidah abd wahab, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad, zaliha wahid.  (2014).  kkkp 4415 projek industri : kajian kes penilaian kejuruteraan kompleks dalam program pembuatan.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm.  . 

hamimah abd. rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2014).  influence of calcination on the properties of la0.6sr0.4co0.2fe0.8o3-d- samarium doped ceria carbonate.  - applied mechanics and materials, trans tech publications, switzerland.  . 

mahendra rao a/l somalu, norhamidi bin muhamad, wan ramli bin wan daud, andanastuti muchtar.  (2014).  effect of redox cycling on the durability and performance of ni/scsz cermet for solid oxide fuel cell application.  - .  . 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  development of ha/ti composite for biomedical application via powder injection molding.  - regenerative research.  67-68. 

hafizawati zakaria, norhamidi muhamad, abu bakar sulong, mohd halim irwan ibrahim, farhana mohd foudzi.  (2014).  moldability characteristics of 3mol yttria stabilized zirconia feedstock for micro-powder injection molding process.  - sains malaysiana.  129-136. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  ha/ti6al4v powder with palm stearin binder system - feedstock characterization.  - applied mechanics and materials.  372-375. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  pencirian keseragaman campuran dan sifat reologi serbuk alumina-zirkonia untuk pengacuan suntikan seramik.  - sains malaysiana.  42(9):1311-1317. 

hamimah abd. rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2013).  la0.6sr0.4co0.2fe0.8o3-sdc carbonate composite cathodes for low-temperature solid oxide fuel cells.  - materials chemistry and physics.  141:752-757. 

m.a.m. arif, m.z. omar, n. muhamad, j. syarif, p. kapranos.  (2013).  microstructural evolution of solid-solution-treated zne22al in the semisolid state.  - journal of materials science & technology.  29(8):765-774. 

shye yunn heng, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, sri yulis m. amin.  (2013).  effect of sintering temperature on the mechanical and physical properties of wc-10%co through micro-powder injection molding (mpim).  - ceramics international.  39:4457-4464. 

abu bakar sulong, mohd ikram ramli, seow liang hau, jaafar sahari, norhamidi muhamad, hendra suherman.  (2013).  rheological and mechanical properties of carbon nanotube/graphite/ss316l/polypropylene nanocomposite for a conductive polymer composite.  - composite: part b.  50:54-61. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2013).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  39(3):2665-2674. 

nagur aziz kamal bashah, norhamidi muhamad, baba md deros, ahmad zakaria, shaharum ashari, achmed mobin, mohd safuan mohd abdul lazat.  (2013).  multi-regression modeling for springback effect on automotive body in white stamped parts.  - materials and design.  46:175-435. 

muhammed ali s. a., andanastuti muchtar, abu bakar sulong, norhamidi muhamad, edy herianto majlan.  (2013).  influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells.  - ceramics international.  39(5):5813-5820. 

nurul akidah baharuddin, hamimah abd. rahman, andanastuti muchtar, abu bakar sulong, huda abdullah.  (2013).  development of lanthanum strontium cobalt ferrite composite cathodes for intermediate- low temperature solid oxide fuel cells.  - journal of zhejiang university-science a.  11-24. 

mojgan ahmadrezaei, andanastuti muchtar, norhamidi muhamad, c.y. tan, edy herianto majlan.  (2013).  electrochemical and microstructural characteristics of nanoperovskite oxides ba0.2sr0.8co0.8fe0.2o3-d (bscf) for solid oxide fuel cells.  - ceramics international.  39(1):439-444. 

norita hassan, sahrim ahmad, norhamidi muhamad, mohd afian omar & noor azlina hassan.  (2013).  thermoplastic natural rubber (tpnr) as a backbone polymer for metal injection molding.  - sains malaysiana.  42(12):1787-1791. 

muhammad ilman hakimi chua, abu bakar sulong, mohd fazuri abdullah & norhamidi muhamad.  (2013).  optimization of injection molding and solvent debinding parameters of stainless steel powder (ss316l) based feedstock for metal injection molding.  - sains malaysiana.  42(12):1743-1750. 

nizaroyani saibani, idham sabtu, norhamidi muhamad, dzuraidah abd. wahab, ja`afar sahari.  (2013).  the score difference of emotional intelligence among engineering students at different levels of academic year.  - international education studies.  72-79. 

z. wahid, n. muhamad, j.a. ghani.  (2013).  effect of temperature related parameters in plastic and metal injection molding process using taguchi method.  - 1st international conference on robust quality engineering (icrqe2013) / utm kuala lumpur.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  optimum powder loading of feedstock based on an alumina-zirconia powder for ceramic injection molding.  - advanced materials research.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2013).  rheological properties of zirconia toughened alumina powder for ceramic injection molding.  - advanced materials research.  . 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, and jaharah a. ghani.  (2013).  effects of injection temperature and pressure on green part density for ceramic injection molding.  - advanced materials research.  . 

ja`afar sahari, syazrin aklili, dzuraidah abd wahab, ruhizan mohd yasin, shahrum abdullah, ahmad kamal ariffin mohd ihsan, shahrir abdullah, mohd zaidi omar, norhamidi muhamad.  (2012).  kreativiti pelajar dalam penyelesaian masalah bagi kursus bersifat reka bentuk.  - .  175-189. 

mohd ikram ramli, abu bakar sulong, amir arifin, andanastuti muchtar, norhamidi muhamad.  (2012).  powder injection molding of ss316l/ha composite: rheological properties and mechanical properties of the green part.  - journal of applied sciences research.  8(11):5317-5321. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong, heng shye yunn.  (2012).  rheological behaviour of novel feedstock for manufacturing porous stainless steel via (mim)-psh.  - jurnal teknologi.  59:187-191. 

mohd ruzi harun, norhamidi muhamad, abu bakar sulong, nor hafiez mohamad nor, khairur rijal jamaludin, mohd halimirwan ibrahim.  (2012).  solvent debinding process for zk60 magnesium alloy mim compact.  - jurnal teknologi.  59:165-169. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, heng shye yunn, sri yulis m. amin, javad rajabi.  (2012).  effect of dry and wet ball milling process on critical powder loading and mixture properties of fine wc-10co-0.8vc powder.  - jurnal teknologi.  59:147-150. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolli fayyaz, azizah wahi.  (2012).  advantages and limitations of using nano sized powders for powdew injection molding process: a review.  - jurnal teknologi.  59:143-146. 

yuzainee md yusoff, mohd. zaidi omar, azami zaharim, azah mohamed, norhamidi muhamad.  (2012).  employability skills performance score for fresh engineering graduates in malaysian industry.  - asian social science.  8(16):140-145. 

nizaroyani saibani, mohamed idham sabtu, norhamidi muhamad, dzuraidah abd wahab, jaafar sahari, baba md. deros.  (2012).  comparison of emotional intelligence scores among engineering students at different stages of an academic program.  - asian social science.  16(8):88-95. 

javad rajabi, norhamidi muhamad, abu bakar sulong.  (2012).  effect of nano-sized powders on powder injection molding: a review.  - microsystem technologies.  18(12):1941-1961. 

arif, m.a.m., omar, m.z., muhamad, n..  (2012).  effect of solid solution treatment on semisolid microstructure of zn-22al alloy.  - pertanika journal of science and technology.  20(1):121-127. 

abu bakar sulong, norhamidi muhamad, amir arifin, kuu bi yong.  (2012).  optimizing injection parameter of metal injection molding processes using the feedstock of 16um stainless steel powder (ss316l), peg, pmma and stearic acid.  - journal of applied sciences research.  8(6):2998-3003. 

amirhossein mansourighasri, n. muhamad, a. b. sulong.  (2012).  processing titanium foams using tapioca starch as a space holder.  - journal of materials processing technology.  212:83-89. 

hamimah abd rahman, andanastuti muchtar, syaharizan haron, norhamidi muhamad & huda abdullah.  (2012).  kesan parameter pemprosesan dan bahan tambah terhadap pengendapan elektroforetik filem lscf6428.  - sains malaysiana.  41(2): 237-244. 

dedikarni panuh, andanastuti muchtar*, norhamidi muhamad & wan ramli wan daud.  (2012).  kesan rawatan haba terhadap mikrostruktur katod berliang ag2o3-bi2o3 di atas substrat keluli kalis karat yang disediakan dengan kaedah pengecatan sluri.  - sains malaysiana.  41(1): 121-127. 

jarot raharjo, andanastuti muchtar*, wan ramli wan daud, norhamidi muhamad & edy herianto majlan.  (2012).  pencirian fizikal dan terma komposit seramik elektrolit sdc-(li/na)2co3 (physical and thermal characterisations of sdc-(li/na)2co3 electrolyte ceramic composites).  - sains malaysiana.  41(1): 95-102. 

hamimah abdul rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2012).  structure and thermal properties of la0.6sr0.4co0.2fe0.8o3d-sdc carbonate composite cathodes for intermediate- to low-temperature solid oxide fuel cells.  - ceramics international.  38: 1571-1576. 

yuzainee md yusoff, azami zaharim, mohd zaidi omar, azah mohamed, norhamidi muhamad, ramlee mustapha and riza atiq abdullah o.k. rahmat.  (2012).  engineering employability skills for malaysian industry: framework.  - proceedings of the 8th wseas international conference on educational technologies (edute`12).  . 

yuzainee md yusoff, azami zaharim, mohd zaidi omar, azah mohamed, norhamidi muhamad, riza atiq abdullah o.k. rahmat.  (2012).  measuring engineering employability skills.  - technology innovations in education - proceedings of the 8th wseas international conference on educational technologies (edute `12).  . 

sri yulis m. amin, norhamidi muhamad, khairur rijal jamaludin, abdolali fayyaz & heng shye yunn.  (2012).  ball milling of wc-co powder as injection molding feedstock.  - applied mechanics and materials.  . 

hassan, n; ahmad, s; muhamad, n; omar, ma.  (2012).  thermoplastic natural rubber (tpnr) as a backbone binder for metal injection molding process.  - 2011 international symposium on materials science and engineering technology, ismset 2011;dubai (advanced materials research).  . 

harun, m.r., muhamad, n., sulong, a.b., mohamad nor, n.h., jamaludin, k.r..  (2012).  metal injection moulding of zk60 magnesium alloy powder using palm stearin based binder system.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research).  . 

zaliha wahid, nor kamaliana khamis, mohd faizal mat tahir, mohd anas mohd sabri, norhamidi muhamad, nizaroyani saibani.  (2012).  kajian tahap kesediaan menghadapi sesi pengajaran di kalangan pensyarah muda.  - kongres pengajaran dan pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012.  . 

jaafar sahari, norhamidi muhamad, dzuraidah abd wahab, juridah johari.  (2012).  assessment of engineering common sense among newly enrolled students of mechanical and manufacturing engineering programs.  - procedia social and behavioral sciences.  . 

yuzainee md yusoff, azami zaharim, mohd zaidi omar, azah mohamed, norhamidi muhamad.  (2012).  evaluate engineering graduates entering workforce based on engineering employability skills.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012).  . 

nizaroyani saibani, idham sabtu, norhamidi muhamad, dzuraidah abd wahab, jaafar sahari.  (2012).  perbezaan skor kecerdasan emosi di kalangan pelajar kejuruteraan pada tahap tahun akademik yang berbeza.  - kongres pengajaran & pembelajaran ukm 2012.  . 

nizaroyani saibani, norhamidi muhamad, dzuraidah abd wahab, jaafar sahari.  (2012).  level of emotional intelligence (eq) scores among engineering students during course enrollment and course completion.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011.  . 

n. saibani*, b. m. deros, n. muhamad, d. a. wahab, j. sahari.  (2012).  the influence of type of race among engineering students towards the level of emotional intelligence (eq) scores.  - procedia social and behavioral sciences - international conference on teaching and learning in higher education (ictlhe 2012) in conjunction with rcee & rhed 2012.  . 

baba md deros, norhamidi mohamed, nizaroyani saibani, norashikin rahman.  (2012).  improving teaching and learning effectiveness through customers feedback.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011.  . 

baba md deros, azah mohamed, norhamidi mohamed, ahmad kamal ariffin mohd ihsan.  (2012).  a study of alumni feedback on outcome based education in the faculty of engineering & built environment, universiti kebangsaan malaysia.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011.  . 

bashah, n.a.k., zakaria, a., kamarulzaman, k.z., mobin, a., lazat, m.s.m.a., muhamad, n., md deros, b..  (2012).  accurate prediction of springback in forming of biw parts.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

zaliha wahid, norhamidi muhamad, akmal hilmi mohd mashudi.  (2012).  significant process parameters in injection molding process for plastic and metal materials.  - 3rd international conference on engineering and ict (icei2012).  . 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2012).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  2665-2674. 

y.m. yusoff, m.z. omar, a. zaharim, a. mohamed, n. muhamad, r. mustapha.  (2011).  enhancing employability skills through industrial training programme.  - .  3:12-17. 

m.z. selamat, j. sahari, n. muhamad and a. muchtar.  (2011).  the effects of thickness reduction and particle sizes on the properties graphite - polypropylene composite.  - international journal of mechanical and materials engineering.  6(2):194-200. 

m. azmirruddin, m.jabir, n.zilla, r. ibrahim, r. awang, m.rafiq, n.a.kassim, norhamidi mohamad.  (2011).  effect of sintering temperature on microstructure and properties of ti-6al-4v alloy using powder injection molding (pim).  - solid state science and technology.  19 (2):16-24. 

ahmed y. musa, n. muhamad, lim tien tien, eng pei chee.  (2011).  synergistic effect of iodide ion and 1-(2h)-phthalazinone on galvanic corrosion of aluminum and mild steel in 1.0 m hcl.  - international journal of electrochemical science.  6:5298-5304. 

n.h. mohamad nor, n. muhamad, a.k. ariffin, m. ruzi, k.r. jamaludin and a. sufizar.  (2011).  injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis.  - journal of applied sciences.  11(10):1833-1838. 

m.a. mussa, s. abdullah, c.s. nor azwadi, n. muhamad.  (2011).  simulation of natural convection heat transfer in an enclosure by the lattice-boltzmann method.  - computers & fluids.  44(1):162-168. 

khairur rijal jamaludin, norhamidi muhamad, sufizar ahmad, mohd halim irwan ibrahim, nor hafiez mohd nor and yusof daud.  (2011).  injection moulding temperature and powder loading influence to the metal injection moulding (mim) green compact.  - scientific research and essays.  6(21):4532-4538. 

mohd h.i. ibrahim, norhamidi muhamad, abu b. sulong, khairur r. jamaludin, nor h.m. nor and sufizar ahmad.  (2011).  optimization of micro metal injection molding with multiple performance characteristics using grey relational grade.  - chiang mai journal of science.  38(2):231-241. 

jamaludin, k.r., muhamad, n., rahman, m.n.a., ahmad, s., ibrahim, m.h.i., nor, n.h.m., harun, m.r., daud, m.y.m..  (2011).  multiple performance optimization for the best metal injection molding green compact.  - journal of applied sciences.  11(9):1663-1667. 

nor, n.h.m., muhamad, n., ibrahim, m.h.i., ruzi, m., jamaludin, k.r..  (2011).  optimization of injection molding parameter of ti-6al-4v powder mix with palm stearin and polyethylene for the highest green strength by using taguchi method.  - international journal of mechanical and materials engineering.  6(1):126-132. 

amin, ym; muhamad, n; jamaludin, kr; fayyaza, a; yunn, hs.  (2011).  ball milling of wc-co powder as injection molding feedstock.  - 2nd international conference on mechanical and aerospace engineering, icmae 2011;bangkok.  . 

n.a. kamal bashah, n. muhamad and b. md deros.  (2011).  multiple regression technique to study the effect of tool design parameters on the springback response.  - epc 2011 regional engineering postgraduate conference 2011, ukm, bangi, selangor d.e.  . 

muhammed ali s.a, *andanastuti muchtar, norhamidi muhamad, abu bakar sulong.  (2011).  improved properties of sdc-carbonate composites for solid oxide fuel cell electrolyte applications.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

dedikarni, andanastuti muchtar*, norhamidi muhamad & wan ramli wan daud.  (2011).  preparation and fabrication of ag-bi2o3 composite cathode on stainless steel substrate by slurry painting method.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

hamimah abd rahman, andanastuti muchtar*, norhamidi muhamad & huda abdullah.  (2011).  lscf layer on sdc substrate by aqueous electrophoretic deposition.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

mojgan ahmadrezaei, andanastuti muchtar*, norhamidi muhammad & chou yong tan.  (2011).  characteristics and electrochemical performance of ba0.2sr0.8co0.8fe0.2o3 cathode material for intermediate temperature solid oxide fuel cells.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

jarot raharjo, andanastuti muchtar*, wan ramli wan daud, norhamidi muhammad & edy heryanto majlan.  (2011).  la0.6sr0.4co0.2fe0.8o3-d-based cathodes for sdc-carbonate composite electrolyte.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad, andanastuti muchtar & abu bakar sulong.  (2011).  optimization the compression moulding process for bipolar plate production using taguchi method.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

dedikarni, andanastuti muchtar, norhamidi muhamad and
wan ramli wan daud.  (2011).  microstructure characterisation of ag2o3-bi2o3 composite cathodes for intermediate temperature solid oxide fuel cells (it-sofcs).  - 8th international conference on composite science and technology location: kuala lumpur, malaysia (key engineering materials).  . 

jarot raharjo, andanastuti muchtar, wan ramli wan daud, norhamidi muhamad and edy herianto majlan.  (2011).  fabrication of porous lscf-sdc carbonates composite cathode for solid oxide fuel cell (sofc) applications.  - 8th international conference on composite science and technology, iccst8; kuala lumpur (key engineering materials).  . 

hamimah abd.rahman, andanastuti muchtar, norhamidi muhamad and huda abdullah.  (2011).  fabrication and characterisation of la0.6sr0.4co0.2fe0.8o3-delta-sdc composite cathode.  - 8th international conference on composite science and technology, iccst8; kuala lumpur (key engineering materials).  . 

mohd fazuri abdullah, abu bakar sulong, norhamidi muhamad, muhammad ilman hakimi chua abdullah, nor hamdan nor yahya.  (2011).  comparison on rheology properties of polypropylene and polyethylene as binder system with stainless steel 316l for metal injection moding.  - key engineering materials.  . 

jarot raharjo, andanastuti muchtar, wan ramli wan daud,
norhamidi muhamad and edy herianto majlan.  (2011).  porous nio-sdc carbonates composite anode for lt-sofc applications produced by pressureless sintering.  - 2011 1st international conference on mechanical engineering, icme 2011 (applied mechanics and materials); phuket.  . 

mojgan ahmadrezaei, andanastuti muchtar, norhamidi muhamad, c.y.tan.  (2011).  preparation and evaluation of baxsr(x-1)coyfe(y-1)o3delta nanomaterial for sofc cathode by oxalate co-precipitation (x=0.2, y=0.8).  - 2011 1st international conference on mechanical engineering, icme 2011 (applied mechanics and materials); phuket.  . 

muhammad ilman hakimi chua, abu bakar sulong, norhamidi muhamad, mohd fazuri abdullah and che hassan che haron.  (2011).  optimization of injection parameters using 16mum stainless steel powder (ss316l) at 63 vol. %, 63.5 vol. % and 64 vol. % powder loading by taguchi method for metal injection molding.  - 8th international conference on composite science and technology, iccst8; kuala lumpur(key engineering materials).  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad and andanastuti muchtar.  (2011).  simultaneous optimization for multiple responses on the compression moulding parameters of composite graphite - polypropylene using taguchi method.  - 8th international conference on composite science and technology, iccst8; kuala lumpur (key engineering materials).  . 

nizaroyani saibani, norhamidi muhamad, dzuraidah a wahab and ja`afar sahari.  (2011).  level of emotional intelligence (eq) scores among engineering students during course enrollment.  - kongres pengajaran dan pembelajaran ukm 2011.  . 

baba md deros, azah mohamed, norhamidi mohamed & ahmad kamal ariffin mohd ihsan.  (2011).  a study of alumni fedback on outcome based education: master of engineering in manufacturing systems.  - kongres pengajaran & pembelajaran ukm2011, hotel vistana, pulau pinang             .  . 

jamaludin k.r., muhamad n., abolhasani h., murtadhahadi, rahman m.n.ab..  (2011).  an influence of a binder system to the rheological behavior of the ss316l metal injection molding (mim) feedstock.  - international conference on advances in materials and processing technologies, ampt 2009; 26 october 2009 through 29 october 2009 (advanced materials research).  . 

li h.p., muhamad n., sulong a.b., yunn h.s., abolhasani h..  (2011).  application of taguchi method for parameters optimization in micro metal injection molding.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket; 3 april 2011 through 4 april 2011 (applied mechanics and materials).  . 

ibrahim m.h.i., muhamad n., sulong a.b., jamaludin k.r., nor n.h.m., ahmad s..  (2011).  optimization of micro metal injection molding ss 316l for the highest green strength by using taguchi method.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research).  . 

jamaludin k.r., muhamad n., rahman m.n.ab., ahmad s., ibrahim m.h.i., nor n.h.m..  (2011).  orthogonal array technique for optimizing the sintering parameter of the metal injection molding (mim) compact: best flexure strength.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research).  . 

johari j., sahari j., abd wahab d., abdullah s., abdullah s., omar m.z., muhamad n..  (2011).  difficulty index of examinations and their relation to the achievement of programme outcomes.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka.  . 

johari j., wahab d.a., sahari j., abdullah s., ramli r., yassin r.m., muhamad n..  (2011).  systematic infusion of creativity in engineering design courses.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka.  . 

muhammed ali, s.a., muchtar, a., muhamad, n., sulong, a.b..  (2011).  a review on preparation of sdc-carbonate as composite electrolyte material for intermediate temperature solid oxide fuel cells (it-sofc).  - 2011 ieee 1st conference on clean energy and technology, cet 2011; kuala lumpur.  . 

li, hp; muhamad, n.  (2011).  feedstock characterization for micro powder injection molding.  - source: advanced manufacturing systems, pts 1-3 book series: (advanced materials research).  . 

abolhasani h., muhamad n..  (2011).  debinding process of a starch-based binder in metal injection moulding.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research).  . 

li h.p., muhamad n..  (2011).  determination of optimal microminiature powder injection molding parameters by taguchi approach.  - source: manufacturing process technology, pts 1-5 book series: advanced materials research.  . 

foudzi f.m., muhamad n., sulong a.b., zakaria h..  (2011).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding (μmim).  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

li h.p., muhamad n..  (2011).  rheological analysis of microminiature powder injection molding (μpim) feedstock.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials).  . 

ibrahim m.h.i., muhamad n., sulong a.b..  (2011).  rheological characterization of water atomised stainless steel ss316l for micro mim.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research).  . 

harun m.r., muhamad n., sulong a.b., nor n.h.m., ibrahim m.h.i..  (2011).  rheological investigation of zk60 magnesium alloy feedstock for metal injection moulding using palm stearin based binder system.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

mohamad nor n.h., muhamad n., jamaludin k.r., ahmad s., ibrahim m.h.i..  (2011).  characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research).  . 

li, h.p., muhamad, n., murthadhahadi.  (2011).  the characterization and flow behavior of 316l stainless steel feedstock for micro metal injection molding (μmim).  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

harun, m.r., muhamad, n., sulong, a.b., mohamad nor, n.h., jamaludin, k.r..  (2011).  the development of metal injection moulding for zk60 magnesium alloy using palm stearin based binder system.  - 2011 international conference on frontiers of manufacturing science and measuring technology, icfmm 2011; chongqing (advanced materials research).  . 

yunn h.s., muhamad n., sulong a.b., fayyaz a., li h.p..  (2011).  critical solid loading and rheological study of wc-10%co.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials).  . 

muhamad n., mohamad nor n.h., ahmad s., ibrahim m.h.i., harun m.r..  (2011).  multiple performance optimization for the best injection molding process of ti-6al-4v green compact.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing(applied mechanics and materials).  . 

hamimah abd.rahman, a. muchtar, norhamidi muhamad
and huda abdullah.  (2011).  influence of processing parameters on electrophoretically deposited la0.6sr0.4co0.2fe0.8o3-delta films.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

s. ahmad, n. muhamad, a. muchtar, j. sahari, k. r. jamaludin, m. h. i. ibrahim and n. h. mohamad nor.  (2011).  taguchi method for the determination of optimised sintering parameters of titanium alloy foams.  - proceedings of the advances in materials and processing technologies (ampt 2009), kuala lumpur (advanced materials research).  . 

a.y. musa, a. a. h. kadhum, m. s. takriff, a. r. daud, s. k. kamarudin and n. muhamad.  (2010).  corrosion inhibitive property of 4-amino-5-phenyl-4h-1,2,4-triazole-3-thiol for mild steel corrosion in 1.0m hydrochloric acid.  - corrosion engineering, science and technology.  45(2):163-168. 

h. abolhasani, n. muhamad.  (2010).  a new starch-based binder for metal injection molding.  - journal of materials processing technology.  210(6-7):961-968. 

nor hafiez mohamad nor, norhamidi muhamad, sufizar ahmad, mohd halim irwan ibrahim, mohd ruzi harun and khairur rijal jamaludin.  (2010).  parameter optimization of injection molding ti-6al-4v powder and palm stearin binder system for highest green density using taguchi method.  - key engineering materials.  . 

mohd halim irwan ibrahim, norhamidi muhamad, abu bakar sulong, khairur rijal jamaludin, nor hafiez mohamad nor, sufizar ahmad, mohd ruzi harun and hafizawati zakaria.  (2010).  parameter optimization towards highest micro mim density by using taguchi method.  - key engineering materials.  . 

khairur rijal jamaludin, norhamidi muhamad, m.n.a. rahman, s. ahmad, m.h.i. ibrahim, n.h.m.nor and m.y.m. daud.  (2010).  application of the grey-taguchi method to the optimization of metal injection molding (mim) process.  - key engineering materials.  . 

sufizar ahmad, norhamidi muhamad, andanastuti muchtar, jaafar sahari, k. r. jamaludin, m. h. i. ibrahim and n.h. mohamad nor.  (2010).  optimisation of processing parameters of titanium foams using taguchi method for compressive strength.  - key engineering materials (icope2010 and 13th icpe international conference on precision engineering).  . 

jarot raharjo, andanastuti muchtar, wan ramli wan daud, norhamidi muhamad and edy heryanto majlan.  (2010).  fabrication of dense composite ceramic electrolyte sdc-(li/na)2co3.  - key engineering materials.  . 

faizal mustapha, mazli mustapha, kartini noorsal, othman mamat, patthi hussain, faiz ahmad, norhamidi muhamad, sallehuddin mohamed haris.  (2010).  preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process.  - journal of materials processing technology.  210(12):1598-1612. 

norhamidi muhamad and hooman abolhasani.  (2010).  development of a starch-based binder in metal injection molding.  - advanced materials research.  . 

k.r. jamaludin, n. muhamad, m.n.a. rahman, murtadhahadi, s. ahmad, m.h.i. ibrahim, n.h.m. nor.  (2010).  rheological investigation of water atomized metal injection molding (mim) feedstock for processibility prediction.  - advanced materials research.  . 

azami zaharim, yuzainee md yusoff, azah mohamed, mohd zaidi omar, norhamidi muhamad, ramlee mustapha.  (2010).  practical framework of employability skills for engineering graduate in malaysia.  - ieee educon education engineering 2010 - the future of global learning engineering education, april 14-16, 2010, madrid spain.  . 

norhamidi muhamad, hooman abolhasani.  (2010).  development of a starch-based binder in metal injection molding.  - the international conference on advances in material and processing technologies.  . 

ahmad, s; muhamad, n; muchtar, a; sahari, j; jamaludin, kr; ibrahim, mhi; nor, nhm; murtadhahadi.  (2010).  characterisation of titanium foams sintered at different temperatures prepared by the slurry method.  - sains malaysiana.  39(1):77-82. 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad & andanastuti muchtar.  (2010).  optimization of compression molding parameters on the properties of composite.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

jovial mahyoedin, jaafar sahari, andanastuti muchtar,& norhamidi muhamad.  (2010).  kesan penambahan karbon hitam terhadap sifat reologi polimer grafit komposit.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

y.m. yusoff, m.z. omar, a. zaharim, a. mohamed, n. muhamad, r. mustapha.  (2010).  enhancing employability skills through industrial training programme.  - latest trends on engineering education, corfu island, greece july 22-24, 2010.  . 

ahmed y. musa, abdul amir h. kadhum, abu bakar mohamad, mohd sobri takriff, abdul razak daud, and siti kartom kamarudin.  (2010).  inhibition of mild steel corrosion under hydrodynamic conditions.  - aip conference proceeding (progress of physics research in malaysia: perfik2009).  . 

hamimah abd.rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2010).  electrophoretic deposition of la0.6sr0.4co0.2fe0.8o3-? cathode film on stainless steel substrates.  - 2010 international conference on manufacturing engineering and automation, icmea2010; guangzhou(advanced materials research).  . 

andanastuti muchtar, noorashrina a. hamid,
norhamidi muhamad, wan ramli wan daud.  (2010).  sintering effects on lscf cathodes for intermediate temperature solid oxide fuel cells (it-sofcs).  - 2010 international conference on manufacturing engineering and automation, icmea2010; guangzhou (advanced materials research).  . 

s. ahmad, n. muhamad, a. muchtar, j. sahari , m.h.i. ibrahim, k.r. jamaludin and n.h.m. nor.  (2010).  development and characterization of titanium alloy foams.  - international journal of mechanical and materials engineering (ijmme).  Vol. 5, No.2, 244-250. 

m.h.i. ibrahim, n. muhamad, a.b. sulong, k.r. jamaludin, s. ahmad and n.h.m. nor.  (2010).  optimization of micro metal injection molding for highest green strength by using taguchi method.  - international journal of mechanical and materials engineering (ijmme).  5(2):282-289. 

mussa, m.a., s. abdullah, c.s.n. azwadi and n. muhamad.  (2010).  cubic-interpolated-pseudo-particle lattice boltzmann method for simulation of natural convection heat transfer in an enclosure with different aspect ratios.  - the 2nd international conference on computer and automation engineering (iccae), singapore.  . 

m.a. mussa, s. abdullah, c.s. nor azwadi and n. muhamad.  (2010).  simulation of rarefied gas flow in slip and transitional regimes.  - european fluid mechanic conference 8.  . 

juridah johari, dzuraidah abd wahab, jaafar sahari, shahrum abdullah, rizauddin ramli, ruhizan mohd yassin dan norhamidi muhamad.  (2010).  penerapan daya cipta secara sistematik dalam kursus berteraskan reka bentuk.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010.  . 

juridah johari, jaafar sahari, dzuraidah abd wahab, shahrum abdullah, shahrir abdullah, mohd zaidi omar dan norhamidi muhamad.  (2010).  indeks kesukaran peperiksaan dan hubung kait dengan pencapaian hasil pembelajaran program.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010.  . 

yusoff ali dan norhamidi muhammad.  (2010).  perubahan paradigma pensyarah dalam pengajaran di institusi pengajian tinggi dimalaysia dengan pengenalan pembelajaran berdasarkan hasil dalam program kejuruteraan.  - kongress pengajaran dan pembelajaran, 2010, di everly resort hotel, melaka 13-15 disember 2010.  . 

hamimah abd.rahman, andanastuti muchtar, norhamidi muhamad & huda abdullah.  (2010).  komposit la1-xsrxco1-yfeyo3-d (lscf) sebagai bahan katod tahan lama bagi sel fuel oksida pejal bersuhu sederhana-rendah: ulasan kajian.  - jurnal kejuruteraan.  22:1-10. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2010).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding.  - applied mechanics and materials.  480-484. 

yazrina yahya, riza sulaiman, muriati mukhtar, salha abdullah norhamidi muhammad.  (2010).  engaging the ssme challenge: curriculum development for the engineering faculty at universiti kebangsaan malaysia.  - transforming engineering education: creating interdisciplinary skills for complex global evironments. 6-9 april 2010, dublin, ireland.  . 

p. dedikarni, a. muchtar, n. muhamad & w.r.w. daud.  (2010).  electrophoretic deposition and thermal treatment of bismuth oxide thin film on ag2o3-bi2o3 composite cathode.  - proceedings of the 1st international conference on process engineering and advanced materials (icpeam2010) & the 24th symposium of malaysian chemical engineers (somche2010).  . 

yuzainee md yusoff, azami zaharim, mohd zaidi omar, azah mohamed, norhamidi muhamad, ramlee mustafa.  (2009).  employers' selection skills in recruiting fresh engineering graduates.  - 2009 international conference on engineering education (lceed 2009), december 7-8, 2009, kuala lumpur, malaysia.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad, andanastuti mukhtar.  (2009).  the effect of deformation by compression on carbon black as a second filler of composite graphite-pp.  - buku abstrak pascasidang bengkel penulisan manuskrip jurnal dan tesis, 18-19 april 2009, residence hotel, uniten.  . 

yovial mahyoedin, jaafar sahari, andanastuti mukhtar, norhamidi muhamad.  (2009).  dispersed study on electrically conducting composite material.  - buku abstrak pascasidang bengkel penulisan manuskrip jurnal dan tesis, 18-19 april 2009, residence hotel, uniten.  . 

jaharah a.g, che hassan c.h, muhamad n.  (2009).  machined surface of aisi h13 tools steels when end milling using p10 tin coated carbide tools.  - european journal of scientific research.  26(2):247-254. 

ahmed. y. musa, abdul amir h. kadhum, abu bakar mohamad, abdul razak daud, mhd sobri takriff, siti kartom kamaruddin & norhamidi muhamad.  (2009).  stability of layer forming for corrosion inhibitor on mild steel surface under hydrodynamic condictions.  - internationa journal of electrochemical science.  4(5):707-716 . 

azami zaharim, mohd zaidi omar, shahrum abdullah, hassan basri, norhamidi muhamad.  (2009).  international trends and the profiles of malaysian engineers.  - european journal of scientific research.  28(2):301-309. 

dedikarni, a. muchtar, n. muhamad & w.r.w. daud.  (2009).  delta- bi2o3 thin film coating on gilded gold substrate by electrophoretic deposition method (epd).  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang..  . 

jarot raharjo, a. muchtar, n. muhamad, w.r.w. daud & e.h. majlan.  (2009).  microstructure characterisation of sdc-carbonate composite electrolytes produced by solid state method for solid oxide fuel cells.  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang.  . 

n. sastaviana, a. muchtar, w.r.w.daud, n. muhamad & e. h. majlan.  (2009).  material development in intermediate temperature solid oxide fuel cells (it-sofcs) : a review.  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing.  . 

shahrir abdullah, norhamidi muhamad, riza atiq abdullah o.k. rahmat, baba md. deros, noorhisham tan kofli,mardina abdullah, mazlan mohd. tahir, andanastuti muchtar.  (2009).  penilaian objektif dan hasil program pendidikan berasaskan hasil (obe): soal selidik majikan industri dan alumni.  - asean journal of teaching and learning in higher education.  1(2):1-8. 

lily amelia, d.a. wahab, c.h. che haron, n. muhamad, c.h. azhari.  (2009).  initiating automotive component reuse in malaysia.  - journal of cleaner production.  17(17):1572-1579. 

noorashrina a. hamid, andanastuti muchtar, wan ramli wan daud & norhamidi muhamad.  (2009).  pencirian mikrostruktur katod la-sr-co-fe-o bagi sel fuel oksida pepejal bersuhu sederhana (it-sofc).  - sains malaysiana.  38(6):857-861 . 

ahmad, s. and muchtar, a. and muhamad, n. and sahari, j. and jamaludin, k. r. and ibrahim, m. h. i..  (2009).  optimising of processing parameters of titanium alloy foams using taguchi method for improved electrical conductivity.  - proceedings of the graduate publication workshop 2009.  . 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, ahmad rasdan ismail, jaharah a. ghani. baba md. deros, norhamidi muhamad & suriani abdul rahman.  (2009).  improving process performance through smes-spc.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009).  . 

norhamidi muhamad, hooman abolhasani.  (2009).  thermoplastic starch / lldpe blends as a binder in metal injection molding.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009).  . 

khairur rijal jamaludin, norhamidi muhamad, mohd nizam ab. rahman, sri yulis m. amin, sufizar ahmad, mohd halim irwan ibrahim, murtadhahadi.  (2009).  prestasi penyahikatan pelarut dengan menggunakan kaedah reka bentuk eksperimen.  - sains malaysiana.  38(6):883-888. 

hooman abolhasani, norhamidi muhamad.  (2009).  rheological investigation of a starch-based binder and feedstock for metal injection molding.  - international journal of mechanical and materials engineering (ijmme).  4(3):294-299. 

sri yulis, m. amin, khairur rijal jamaludin, and norhamidi muhamad.  (2009).  rheological properties of ss316l mim feedstock prepared with different particle sizes and powder loadings.  - the institution of engineers malaysia journal.  71(2):59-63. 

jarot raharjo, w.r.w. daud, n. muhamad, a. muchtar and e.h. majlan.  (2009).  synthesis and characterisation of sdc-carbonate composite electrolytes for low temperature solid oxide fuel cells (lt -sofc) applications.  - proceedings of international conference on fuel cell and hydrogen technology.  . 

azami zaharim, mohd marzuki mustafa, khamisah jafar, norhamidi muhamad.  (2009).  corak pencapaian pelajar kumpulan pertama sistem pendidikan.  - asean journal of teaching and learning in higher education.  1(1):58-64. 

azami zaharim, mohd. zaidi omar, hassan basri, norhamidi muhamad, farah liza mohd. isa.  (2009).  a gap study between employers? perception and expectation of engineering graduates in malaysia.  - wseas transactions on advances in engineering education.  11(6):409-419. 

mohd ruzi h, norhamidi m, abu bakar s, khairur r.j, nor hafiez m.n, sufizar a, mohd halim i.i, murtadhahadi.  (2009).  a review of workability of wrought magnesium.  - amreg 2009.  . 

murtadhahadi, n. muhamad, a. b. sulong, c. h. c. harun, k. r. jamaludin,m. h. i. ibrahim, n. h. m. nor and s. ahmad.  (2009).  temperature influence to solvent debinding of metal injection molding (mim) components.  - prosiding seminar - amreg 09, 29 july 2009, putrajaya, malaysia.  . 

baba md deros, norhamidi mohamad, nizaroyani saibani and norashikin rahman.  (2009).  using customer`s feedback for improving teaching and learning effectiveness.  - seminar pendidikan kejuruteraan & alam bina (peka2009).  . 

d.a. wahab, lily amelia, a.r. ismail, r. ramli, n. muhamad and c.h. che haron.  (2009).  reusability enhancement of automotive components through disassembly study.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009).  . 

m.a. mussa, s. abdullah, c.s. nor azwadi and n. muhamad.  (2009).  cubic-interpolated-pseudo-particle lattice boltzmann method for simulation of natural convection heat transfer in an enclosure.  - the 10th asian international conference on fluid machinery, 21-23 oct 2009, kuala lumpur, malaysia.  . 

azami zaharim, yuzainee md yusoff, mohd. zaidi omar, azah mohamed, norhamidi muhamad, ramli mustapha.  (2009).  perceptions and expectation toward engineering graduates by employers : a malaysian study case.  - wseas transactions on advances in engineering education.  6(9):296-305. 

azami zaharim, yuzainee md yusoff, mohd. zaidi omar, azah mohamed, norhamidi muhamad, ramli mustapha.  (2009).  employers perception towards engineering employability skills in asia.  - wseas transactions on advances in engineering education.  6(9):306-315. 

abu bakar sulong, norhamidi muhamad, che husna azahari, ahmad rasdan ismail, joohyuk park.  (2009).  effects of chemical functionalized mwcnts/epoxy matrix composites on electrical conductivity behavior.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009).  . 

nanda sastaviana, andanastuti muchtar,wan ramli wan daud, norhamidi muhamad.  (2009).  synthesis and microstructure characterisation of nio-sdc composite powders.  - engineering postgraduate conference epc2009.  . 

dedikarni, andanastuti muchtar, norhamidi muhamad, wan ramli wan daud.  (2009).  microstructure and characterisation of ?- bi2o3 thin film electrolyte on electrodes by electrophoretic deposition method.  - engineering postgraduate conference epc2009, palm garden, putrajaya.  . 

jarot raharjo, wan ramli wan daud, norhamidi muhamad, andanastuti muchtar, edy herianto majlan.  (2009).  microstructure characteristics of sdc-carbonate composite electrolytes for low temperature solid oxide fuel cells.  - engineering postgraduate conference (epc2009), palm garden resort, putrajaya.  . 

s. ahmad, n. muhamad, a. muchtar, j. sahari, k. r. jamaludin, m. h. i. ibrahim and n. h. mohamad nor.  (2009).  optimisation of processing parameters of titanium foams using taguchi method for improved electrical conductivity.  - international conference on sustainable energy 2009, bandung, indonesia.  . 

a. muchtar, jarot raharjo, n. muhamad, e.h. majlan and w.r.w. daud.  (2009).  characterisation of sdc-carbonate composite electrolytes for low temperature solid oxide fuel cells.  - international conference on sustainable energy 2009, bandung, indonesia.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad and andanastuti muchtar.  (2009).  the effects of deformation by compression on composite graphite -pp properties.  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang. malaysia.  . 

nanda sastaviana, a. muchtar, w.r.w. daud, n. muhamad, e. h. majlan.  (2009).  sintesis dan morfologi komposit nio-sdc sebagai bahan anod sel fuel oksida pejal bersuhu menengah.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad and andanastuti muchtar.  (2009).  the effects of parameters of compression molding on the properties of composite graphite ? polypropylene using taguchi method.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

sufizar ahmad, norhamidi muhamad, andanastuti muchtar & jaafar sahari.  (2009).  kesan suhu pensinteran dan komposisi titanium tulen terhadap peratus keliangan sampel selepas disinter.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

hamimah abd.rahman, andanastuti muchtar, norhamidi muhamad, huda abdullah.  (2009).  pembangunan bahan katod perovskit lantanum strotium kobalt ferit untuk sel fuel oksida pejal : ulasan kajian.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

dedikarni, a. muchtar, n. muhamad, w. r.w daud.  (2009).  kesan pengulangan salutan ag2o3-bi2o3 terhadap keliangan katod.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

jarot raharjo, andanastuti muchtar, norhamidi muhamad, edy heryanto majlan dan wan ramli wan daud.  (2009).  pencirian fisikal elektrolit komposit sdc-(li/k) 2co3 yang dihasilkan secara kaedah sol-gel untuk sel fuel oksida pepejal.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

mojgan ahmadrezaei, andanastuti muchtar, norhamidi muhamad, tan chou yong.  (2009).  synthesis, characterisation and thermal expansion coefficient of nanostructured cathode material (baxsr1-xcoyfe1-yo3??) (bscf) for solid oxide fuel cells: a review.  - kolokium & sanggar kerja ii, institut sel fuel, pulau pinang.  . 

sulong a.b., muhamad n., sahari j., ramli r., deros b.m., park j..  (2009).  electrical conductivity behaviour of chemical functionalized mwcnts epoxy nanocomposites.  - european journal of scientific research.  29(1):13-21. 

abdullah s., rahmat r.a.a.o.k., zaharim a., muhamad n., deros b.m., kofli n.t., abdullah m., mohd. tahir m., muchtar a., azhari c.h..  (2009).  implementing continual review of programme educational objectives and outcomes for obe curriculum based on stakeholders` input.  - european journal of scientific research.  29(1):89-99. 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, jaharah a ghani, baba md deros, nurhamidi mohamad, ahmad rasdan ismail.  (2009).  the implementation of spc in malaysian manufacturing companies.  - european journal of scientific research.  26(3):453-464. 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

zaharim, a; yusoff, ym; omar, mz; mohamed, a; muhamad, n.  (2009).  employers` perceptions and expectation toward engineering graduates: a study case.  - proceedings of the 6th wseas international conference on engineering education - recent advances in engineering education.  . 

zaharim, a; yusoff, ym; omar, mz; mohamed, a; muhamad, n.  (2009).  engineering employability skills required by employers in asia.  - proceedings of the 6th wseas international conference on engineering education - recent advances in engineering education.  . 

ab rahman, mn; zain, rm; nopiah, zm; ismail, ar; deros, bm; rahman, sa; ghani, ja; muhamad, n.  (2009).  development of online smes-spc computer based system.  - proceedings of the 11th wseas international conference on automatic control, modeling and simulation - controlling, modeling and simulation.  . 

jamaludin, kr; muhamad, n; rahman, mna; ahmad, s; ibrahim, mhi; nor, nhm.  (2009).  optimizing the injection parameter of water atomised ss316l powder with design of experiment method for best sintered density.  - chiang mai journal of science.  36(3):349-358. 

ibrahim m.h.i., muhamad n., sulong a.b..  (2009).  rheological investigation of water atomised stainless steel powder for micro metal injection molding.  - international journal of mechanical and materials engineering.  4(1):1-8. 

mohamad nor n.h., muhamad n., ismail m.h., jamaludin k.r., ahmad s., ibrahim m.h.i..  (2009).  flow behaviour to determine the defects of green part in metal injection molding.  - international journal of mechanical and materials engineering.  4(1):70-75. 

jovial mahyoedin, jaafar sahari, andanastuti muchtar & norhamidi muhammad.  (2009).  kesan parameter proses pengacuan suntikan terhadap pembuatan komposit beraliran elektrik menggunakan kaedah taguchi.  - prosiding kolokium & sanggar kerja ii, institut sel fuel, disember 2009.  .