Penerbitan Terkini

che hassan che haron, jaharah abdul ghani, muammar faiq azhar, nurul hayati abdul halim, n. badroush.  (2021).  microstructure and microhardness alterations of inconel 718 under cryogenic cutting.  - journal of mechanical engineering.  51-64. 

ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2021).  green lubrication technique for sustainable machining of aisi 4340 alloy steel.  - jurnal tribologi.  1-19. 

n.n. nor hamran, j.a. ghani, r. ramli, c.h. che haron.  (2020).  a review on recent development of minimum quantity lubrication for sustainable machining.  - journal of cleaner production.  1-18. 

nurul hayati abdul halim, che hassan che haron & jaharah abdul ghani.  (2020).  sustainable machining of hardened inconel 718: a comparative study.  - international journal of precision engineering and manufacturing.  1375-1387. 

jaharah bt. a ghani;che hassan bin che haron;siti masrinda bt. tasirin;wan mohd faizal bin wan mahmood.  (2020).  performance of bio-metal cutting fluid from treated recycled cooking oil in machining ferrous and non ferrous metal for sustainable manufacturing.  -

nor aznan mohd nor, b.t.h.t baharudin, j. a. ghani, z. leman and m.k.a. ariffin.  (2020).  effect of chip load and spindle speed on cutting force of hastelloy x.  - journal of mechanical engineering and sciences.  6497-6503. 

r samin, n azman, mz nuawi, sm haris, ja ghani.  (2020).  optimization of the surface roughness for titanium ti6a14v in turning process using taguchi method.  - test engineering and management.  1072-1078. 

shukriah abdullah, baba md deros, nor kamaliana khamis, jaharah a. ghani & sholehah abdullah.  (2020).  an approach to work design: in-depth audit to determine the modifiers of musculoskeletal disorder symptom among vehicle maintenance personnel.  - jurnal kejuruteraan.  281-287. 

shalina sheik muhamad, jaharah a. ghani1, che hassan che haron , hafizal yazid.  (2020).  the effects of cutting environment on surface roughness and tool life in milling of aisi 4340.  - 3rd international conference on advances in mechanical engineering (icame 2020).  xx. 

shukriah abdullah, nor kamaliana khamis, jaharah a. ghani & rudi kurniawan.  (2020).  posture evaluation of the automotive maintenance workers: a case study.  - jurnal kejuruteraan.  65-70. 

shalina sheikh muhamad, jaharah a. ghani, che hassan che haron, hafizal yazid.  (2020).  wear mechanism of a coated carbide tool in cryogenic machining of aisi 4340.  - industrial lubrication and tribology.  509-514. 

musfirah abdul hadi, jaharah a.ghani.  (2020).  enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718.  - proceedings of the 4th international manufacturing engineering conference and the 5th asia pacific conference on manufacturing systems.  512-517. 

husni nazra abu bakar, jaharah a. ghani , che hassan che haron.  (2020).  influence of rounded cutting-edge radius and machining parameters on surface roughness and tool wear in milling aisi h13 steel under dry and cryogenic machining.  - jurnal tribologi.  52-64. 

shukriah abdullah, nor kamaliana khamis, jaharah ab ghani.  (2020).  evaluation of different automotive maintenance activities on the worker postures: an objective assessment.  - human factors and ergonomics journal.  36-41. 

shalina sheik muhamad, jaharah a. ghani, che hassan che haron, and hafizal yazid.  (2020).  cryogenic milling and formation of nanostructured machined surface of aisi 4340.  - nanotechnology reviews.  1104-1117. 

muhammad asyraf mohd azmi, wan mohd faizal wan mahmood, jaharah a. ghani, mohammad rasidi mohammad rasani.  (2020).  a review of surface texturing in internal combustion engine piston assembly.  - international journal of integrated engineering.  146-163. 

che hassan che haron, jaharah a. ghani, mummar faiq azhar, nurul hayati abdul halim.  (2019).  wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions.  - jurnal tribologi.  108-116. 

shalina sheik muhamad, jaharah a. ghani, afifah juri, che hassan che haron.  (2019).  dry and cryogenic milling of aisi 4340 alloy steel.  - jurnal tribologi.  1-12. 

mohd. zaki bin nuawi;jaharah bt. a ghani;shahrum bin abdullah;zulkifli bin mohd nopiah;zaliha binti wahid.  (2019).  pembangunan sistem pemantauan haus mata alat menggunakan pelbagai jenis sensor dalam proses lirik.  -

shukriah abdullah, nor kamaliana khamis, jaharah ab ghani.  (2019).  evaluation of different automotive maintenance activities on the worker postures: an objective assessment.  - international conference on ergonomics (ice).  1-11. 

shukriah a., nor kamaliana k., jaharah a.g and baba m.d.  (2019).  posture evaluation of the automotive maintenance workers: a case study.  - book of abstracts: 6th international conference on advanced processes and systems in manufacturing (apsim 2019).  25. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  surface characterisation of ticxn1x coatings processed by cathodic arc physical vapour deposition: xps and xrd analysis.  - surface and interface analysis.  611-617. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  the study on the properties of ticn coatings processed by cathodic arc physical vapour deposition.  - tribology - materials, surfaces & interfaces.  58-66. 

natasha a. raof, jaharah a. ghani, che hassan che haron.  (2019).  machining-induced grain refinement of aisi 4340 alloy steel under dry and cryogenic conditions.  - journal of materials research and technology.  4347-4353. 

m.s. kasim, m.s.a. hafiz, j.a. ghani, c.h.c. haron, r. izamshah, s.a. sundi, s.b. mohamed, i.s. othman.  (2019).  investigation of surface topology in ball nose end milling process of inconel 718.  - wear.  1318-1326. 

j.a. ghani, m.n.a.m. dali, h.a. rahman, c.h.c. haron, w.m.f. wan mahmood,m.r.m. rasani, m.z. nuawi.  (2019).  analysis of dimple structure fabricated using turning process and subsequent reduction in friction.  - wear.  1280-1285. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood, mohammad rasidi mohammad rasani,.  (2019).  computational fluid dynamic study on the tribological performance of dimple-textured surface fabricated using the turning process.  - industrial lubrication and tribology.  594-602. 

n.h.a. halim, c.h.c. haron, j.a. ghani, m.f. azhar.  (2019).  tool wear and chip morphology in high-speed milling of hardened inconel 718 under dry and cryogenic co2 conditions.  - wear.  1683-1690. 

n. a. kasim, m. z. nuawi, j. a. ghani, m. rizal, m. a. f. ahmad and c. h. che haron.  (2019).  cutting tool wear progression index via signal element variance.  - journal of mechanical engineering and sciences.  4596-4612. 

che hassan bin che haron;ja`afar bin sahari @ shaari;che husna bt. azhari;norhamidi bin muhamad;jaharah bt. a ghani;abu bakar bin sulong.  (2018).  machinability and moldability of high strenght kenaf polymer matrix composites.  -

afifah juri, shalina sheik muhamad, jaharah a. ghani, che hassan che haron.  (2018).  study of milling parameter effect of aisi 4340 alloy steel using fem simulation.  - proceedings of mechanical engineering research day 2018. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood, rasidi rasani.  (2018).  influence of dimple textured surface on hydrodynamic pressure distribution via computational fluid dynamic.  - proceedings of mechanical engineering research day 2018. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood.  (2018).  a brief review on friction reduction via dimple structure for piston engine.  - world review of science, technology and sustainable development. 

z. karim, izatul hamimi abdul razak, a.y.m. said, m.z. nuawi, j.a. ghani,.  (2018).  strain gauge-based online tool wear monitoring using i-kaz multilevel signal.  - journal of advanced research in dynamical and control systems. 

jaharah a. ghani, sharudin hassan, mohd nor azam bin mohd dali, che hassan che haron.  (2018).  fabrication of a dimple structure using a machining process on a metallic surface.  - world review of science, technology and sustainable development. 

mohd shahfizal mohd ruslan, haniff abdul rahman, jaharah abdul ghani, che hassan che haron, mohd shahir kassim, kamal othman.  (2018).  determination of optimum machining condition for surface roughness using historical data.  - international journal of engineering & technology. 

m. rizal, j.a. ghani, husni, husaini.  (2018).  design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process.  - journal of mechanical engineering and sciences. 

mohd shahfizal ruslan, kamal othman, mohd shahir kasim, jaharah a. ghani, che hassan che haron.  (2018).  optimization on surface roughness in dry high speed milling of mg alloy az91d.  - proceedings of mechanical engineering research day 2018. 

noor atiqah badaluddin, wan fathul hakim w zamri, muhammad faiz md din, intan fadhlina mohamed, and jaharah a ghani.  (2018).  coatings of cutting tools and their contribution to improve mechanical properties: a brief review.  - international journal of applied engineering research. 

n. badroush, c.h. che haron, j. a. ghani, m.f. azhar, nurul hayati abdul halim.  (2018).  overview and case study of cryogenic cooling in machining of nickel based alloy.  - journal of mechanical engineering. 

kamal othman, jaharah a.ghani, afifah juri, mohd shahfizal ruslan, mohd shahir kassim, che hassan che haron.  (2018).  face milling study of hyperutectic al-si alloys in dry condition.  - proceedings of mechanical engineering research day 2018. 

h. azmi, c.h. che haron, j.a. ghani & m. suhaily.  (2018).  pembandingan kesan faktor pelekangan (fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar.  - sains malaysiana. 

muhamad arif fadli ahmad, mohd. zaki nuawi, jaharah a. ghani, shahrum abdullah and mohd irman ramli.  (2018).  an investigation on tool wear monitoring using mfc and pvdf sensors via i-kaztm statistical signal analysis.  - proceedings of mechanical engineering research day 2018. 

m. suhaily, c.h. che hassan, a.g. jaharah, h azmi, m.a. afifah & m.k.nor khairusshima.  (2018).  study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills.  - 6th international conference on nano and materials science- aip conf. proc. 

h. azmi, c.h. c. haron, j. a. ghani, m. suhaily & a.r. yuzairi.  (2018).  machinability study on milling kenaf fiber reinforced plastic composite materials using design of experiments.  - iop conf. series: materials science and engineering. 

n. badroush, c. h. che haron, j. a. ghani, m. f. azhar, nurul hayati abdul halim.  (2018).  performance of coated carbide tools when turning inconel alloy 718 under cryogenic condition using rsm.  - journal of mechanical engineering. 

a r natasha, j a ghani, c h che haron & j syarif.  (2018).  the influence of machining condition and cutting tool wear on surface roughness of aisi 4340 steel.  - iop conference series: materials science and engineeringinternational conference on advances in manufacturing and materials engineering (icamme 2017),. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi & che hassan che haron.  (2018).  an embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling.  - the international journal of advanced manufacturing technology.  811-823. 

kamal othman, jaharah a. ghani, mohd shahfizal ruslan, mohd shahir kassim.  (2018).  surface roughness of hypereutectic al-si a390 in high speed milling.  - jurnal tribologi.  42-50. 

m.s. kasim, c.h.che haron, j.a.ghani, r.izamshah, m.akmal, m.a.ali, m. hadzley and m.s. salleh.  (2018).  investigation of tangential force on ball nose rake face during high-speed milling of inconel 718.  - advances in materials and processing technologies. 

shalina sheik muhamad, jaharah a. ghani and che hassan che haron.  (2018).  a review on future implementation of cryogenic machining in manufacturing industry.  - progress in industrial ecology. 

m. a. f. ahmad, m. z. nuawi, j. a. ghani, s. abdullah dan a. n. kasim.  (2018).  tool wear monitoring using macro fibre composite as a vibration sensor via i-kaztm statistical signal analysis.  - arpn journal of engineering and applied sciences. 

nurul hayati abdul halim, che hassan che haron, jaharah a. ghani and muammar faiq azhar.  (2018).  machining-induced microstructure of inconel 718 in cryogenic environment.  - progress in industrial ecology. 

m.s. asiyah, m.a. sulaiman, r. shahmi, r. zuraimi, e. mohamad, c.h. che haron, j.a. ghani.  (2018).  performance of cvd coated carbide tool by optimizing machining parameters during turning titanium alloy ti-6al-4v eli in flooded condition.  - journal of advanced manufacturing technology. 

husni nazra abu bakar, jaharah a. ghani, che hassan che haron.  (2018).  numerical investigation on effect of rounded cutting edge radius and machining parameters in end milling of aisi h13 tool steel.  - international journal of engineering & technology. 

c h chan, m s kasim, r izamshah, h a bakar, s a sundi, k a zakaria, c h c haron, j a ghani and m s a hafiz.  (2017).  analysis of face milling performance on inconel 718 using fem and historical data of rsm.  - iop conf. series: materials science and engineering. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad & jaharah a. ghani.  (2017).  kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik.  - sains malaysiana.  1979-1986. 

z. karim, a. y. m. said, m. z. nuawi, j. a. ghani and a. r. bahari.  (2017).  value prediction of materials mechanical properties using i-kaz analysis method during impact test: experimental study.  - international journal of applied engineering research.  14608-14619. 

aminul islam, a.k.m., yaakob, z., anuar, n., primandari, s.r.p., ghani, j.a..  (2017).  properties of jatropha hybrid seed oil and its suitability as biodiesel feedstock.  - energy sources, part a: recovery, utilization and environmental effects.  1707-1717. 

azmi harun, sia ting ting, che hassan che haron, jaharah a. ghani, suhaily mokhtar.  (2017).  a study on parameter optimization of the delamination factor (fd) in milling kenaf fiber reinforced plastics composite materials using doe method.  - journal of mechanical engineering. 

suhaily mokhtar, che hassan che haron, jaharah a. ghani, azmi harun.  (2017).  evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates.  - journal of mechanical engineering. 

mohd nor azam mohd dali, jaharah a. ghani, che hassan che haron, sharudin hassan.  (2017).  fabrication of dimple structured surface of a390 al-si alloy using turning process.  - industrial lubrication and tribology.  348-354. 

m. rizal , j.a.ghani , m.z.nuawi, c.h.c.haron.  (2017).  cutting tool wear classification and detection using multi-sensor signals and mahalanobis-taguchi system.  - wear.  1759-1765. 

a.h.musfirah, j.a.ghani , c.h.che haron.  (2017).  tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed.  - wear.  125-133. 

dali, m. n. a. m., ghani, j. a , che haron, c.h..  (2017).  comparison between dynamic and non-dynamic cutting tool option in fem simulation.  - 16th cirp conference on modelling of machining operations.  613-616. 

a. shukriah, m. d. baba, and a.g. jaharah.  (2017).  reba evaluation on garage worker: a case study.  - journal of fundamental and applied sciences.  1080-1086. 

a. shukriah, m. d. baba, a. g. jaharah.  (2017).  prevalence and factors contributing to musculoskeletal disorder among garage worker in malaysia.  - journal of fundamental and applied sciences.  1070-1079. 

husni nazra abu bakar, jaharah a. ghani, afifah zakiyyah juri & che hassan che haron.  (2017).  effects of cutting edge radius on the tool life and product quality in the machining process.  - 12th international symposium on advanced science and technology in experimental mechanics, 1-4 november, 2017, kanazawa, japan. 

sharudin hassan , jaharah a. ghani, che hassan che haron, mohd nor azam mohd dali,muhammad rizal.  (2017).  a review of the milling process to fabricate a dimple structure.  - journal of mechanical engineering.  175-192. 

sharudin bin hassan, jaharah a. ghani, che hasan che haron, mohd nor azam bin md dali.  (2017).  development of dynamic assisted tooling using triz approach for dimple structure fabrication in milling process.  - journal of mechanical engineering.  23-32. 

mohd nor azam bin mohd dali, jaharah a. ghani, che hassan che haron, muhammad rizal.  (2017).  triz approach for designing a new assisted tooling for dimple structure fabrication.  - journal of mechanical engineering.  79-90. 

jaharah a. ghani, che hassan che haron, hazreen othman, natasha a. raof.  (2017).  chip formation in turning s45c medium carbon steel in cryogenic conditions.  - jurnal tribologi.  1-9. 

sukadarin e.h., deros b.m., ghani j.a., mohd nawi n.s., ismail a.r..  (2016).  postural assessment in pen-and-paper-based observational methods and their associated health effects: a review.  - international journal of occupational safety and ergonomics.  389-398. 

harun a., haron c.h.c., ghani j.a., mokhtar s., sanuddin a..  (2016).  fundamental study on delamination in milling kenaf fiber reinforced plastic composite (unidirectional).  - asme 2016 11th international manufacturing science and engineering conference, msec 2016.  1-7. 

said m.s., ghani j.a., selamat m.a., wan n.n., hassan c.c.h..  (2016).  optimisation of end milling machining parameters using the taguchi method and anova of alsi/aln metal matrix composite material.  - key engineering materials.  200-204. 

karim z., nuawi m.z., ghani j.a., said a.y.m..  (2016).  preliminary study on machining condition monitoring system using 3-channel force sensor analyzed by i-kaz multilevel method.  - international journal on advanced science, engineering and information technology.  508-511. 

jaharah a. ghani, a.r. natasha, c.h. che hassan and j. syarif.  (2016).  triz approach for machining process innovation in cryogenic environment.  - international journal of materials & product technology.  286-297. 

mohd nor azam bin mohd dali, jaharah a. ghani, che hassan che haron, sharudin bin hassan.  (2016).  fem simulation for determining suitable parameters for dimple structure fabrication in turning process.  - international journal of materials & product technology.  218-230. 

zaliha wahid; sallehuddin mohamed haris; nizaroyani saibani; jaharah a. ghani; rozli zulkifli; mohd radzi abu mansor.  (2016).  examination achievement of engineering students from ukm and ude: a comparison.  - pertanika journal of social sciences and humanities.  229-238. 

ezrin hani sukadarin, baba md deros, nur syazwani mohd nawi, jaharah a. ghani, ahmad rasdan ismail and junaidah zakaria.  (2016).  a preliminary study of postural problems among oil palm workers: is owas method suitable to investigate those problems?.  - international journal of engineering technology and sciences.  79-90. 

ezrin hani sukadarin, baba md deros, nur syazwani mohd nawi, jaharah a. ghani, ahmad rasdan ismail and junaidah zakaria.  (2016).  back pain and the observed factors among oil palm workers.  - international journal of engineering technology and sciences.  70-78. 

m. s. kasim, c. h. che haron, j. a. ghani, m. a. hadi, r. izamshah, t. j. s. anand & s. b. mohamed.  (2016).  cost evaluation on performance of a pvd coated cutting tool during end-milling of inconel 718 under mql conditions.  - transactions of the imf.  175-181. 

nor khairusshima muhamad khairussaleh, che hassan che haron and jaharah a. ghani.  (2016).  study on wear mechanism of solid carbide cutting tool in milling cfrp.  - journal of material research.  1883-1889. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

jaharah a. ghani and che hassan che haron, mohd shahir kasim and mohd amri sulaiman, siti haryani tomadi.  (2016).  wear mechanism of coated and uncoated carbide cutting tool in machining process.  - journal of material research.  1873-1879. 

m. s. said, j. a.ghani, a. syed, m. f. azlan, z. a. latiff and b. zubir.  (2016).  tool wears on drill metal matrix composites (mmc) al-si/10%aln material.  - arpn journal of engineering and applied sciences.  7677-7682. 

mohd shahfizal ruslan, kamal othman, jaharah a.ghani, mohd shahir kassim, che hassan che haron.  (2016).  surface roughness of magnesium alloy az91d in high speed milling.  - jurnal teknologi.  115-119. 

n.h.m. tahir, r. muhammad, j. a. ghani, m. z. nuawi, c. h. c. haron.  (2016).  monitoring the flank wear using piezoelectric of rotating tool of main cutting force in end milling.  - jurnal teknologi.  45-51. 

h. azmi, c. h. c haron, j. a. ghani, m. suhaily, a. b. sanuddin and j. h. song.  (2016).  study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology.  - arpn journal of engineering and applied sciences.  4761-4766. 

a.r. natasha, j.a. ghani, c.h. che haron, j. syarif, a.h. musfirah.  (2016).  temperature at the tool-chip interface in cryogenic and dry turning of aisi 4340 using carbide tool.  - international journal of simulation modelling.  1-12. 

rizal, m., ghani, j.a., nuawi, m.z., haron, c.h.c..  (2016).  a triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool.  - 9th international conference on sensing technology, icst 2015; auckland; new zealand.  289-294. 

deros bm, daruis ddi, ghani ja, salleh c, wazir rm, yasim mk, hassan nh, wazir mfm, saidin ms, noridan wnaw, saidi ms.  (2016).  a case study on manual handling at an electronic component manufacturing company.  - malaysian journal of public health medicine.  1-6. 

musfirah abdul hadi, jaharah a. ghani, che hassan che haron and mohd. shahir kasim.  (2016).  effect of cutting speed on the carbide cutting tool in milling inconel 718 alloy.  - journal of materials research.  1885-1892. 

haris jamaluddin, jaharah a. ghani, baba md deros, mohd nizam ab rahman and rizauddin ramli.  (2016).  quality improvement using taguchi method in shot blasting process.  - journal of mechanical engineering and sciences.  2201-2214. 

ezrin hani sukadarin, baba md deros, jaharah a. ghani, ahmad rasdan ismail, nur syazwani mohd nawi, norhidayah abdull.  (2016).  validity test for simple ergonomics risk assessment (sera) method.  - malaysian journal of public health medicine.  134-143. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

yanda, h.; ghani, j. a.; rizal, m. & che haron, c. h..  (2015).  performance of uncoated and coated carbide tools in turning fcd700 using fem simulation.  - international journal of simulation modelling.  416-425. 

m.t.n. hidayah, j.a. ghani, m.z. nuawi, c.h.c. haron.  (2015).  a review of utilisation of cutting force analysis in cutting tool condition monitoring.  - international journal of engineering & technology.  28-35. 

mohd nor azam bin mohd dali, jaharah a. ghani and che hassan che haron.  (2015).  triz approach for analyzing method of dimple structure fabrication.  - arpn journal of engineering and applied sciences.  6257-6262. 

a.n. siregar, j.a. ghani, c.h.c. haron, m. rizal, z. yaakob, s.k. kamarudin.  (2015).  comparison of oil press for jatropha oil a- review.  - research in agricultural engineering.  1-13. 

w. m. f. w. mahmood, m. a. ariffin, z. harun, n. a. i. md. ishak, j. a. ghani, m. n. ab. rahman.  (2015).  characterisation and potential use of biochar from gasified oil palm wastes.  - journal of engineering science and technology.  45-54. 

m. s. said, j. a. ghani, che hassan c. h., n. n. wan, m. a. selamat, r. othman.  (2015).  tool wear of metal matrix composite 10wt% aln reinforcement using tib2 cutting tool.  - international journal of chemical, nuclear, materials and metallurgical engineering.  39-42. 

baba bin md deros, jaharah bt. a ghani, dzuraidah binti abd. wahab, ir. ahmad rasdan bin ismail, mohd nizam bin ab rahman, dr. dian darina indah binti saruis.  (2015).  development of an ergonomic car operation and control pedal.  -

karim z., nuawi m.z., ghani j.a., ghazali m.j., abdullah s., mansor n.i.i..  (2015).  sliding wear evaluation of aluminum alloy (7075-t6) on hardened steel (aisi4340) via non-contact technique by i-kaz™ multi-level analysis.  - wear.  99-104. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2015).  development and testing of an integrated rotating dynamometer on tool holder for milling process.  - mechanical systems and signal processing.  559-576. 

muhammad rizal, jaharah a. ghani, che hassan che haron.  (2015).  a triaxial cutting force measurement utilizing an.  - 2015 ninth international conference on sensing technology.  321-326. 

jaharah a. ghani, yeong shoot kian , che hassan che harun.  (2015).  performance of commercial and palm oil lubricants in turning fcd700.  - jurnal tribologi.  1-9. 

a.k.m. aminul islam, nurina anuar, zahira yaakob, jaharah a. ghani & mohamad osman.  (2015).  diallel analysis for seed yield and related traits in an energy crop jatropha curcas.  - sains malaysiana.  979-986. 

a.k.m. aminul islam, nurina anuar, zahira yaakob & jaharah a. ghani.  (2015).  germination behaviour of 6 × 6 diallel hybrids of an energy crop jatropha curcas l.  - sains malaysiana.  1275-1281. 

azmi bin harun, che hassan bin che haron, jaharah binti a. ghani, suhaily binti mokhtar, sia ting ting.  (2015).  study the effect of milling parameters on surface roughness during milling kenaf fibre reinforced plastic.  - advances in environmental biology.  46-52. 

p.c. siow, j.a. ghani, r.j. talib, m.j. ghazali, c.h. che haron.  (2015).  characterization using xps and xrd of ti(c,n) coating properties for cutting tool applications.  - interceram: international ceramic review.  287-290. 

a. h. musfirah, j. a. ghani, c. h. che haron, m. s. kasim.  (2015).  effect of cutting parameters on cutting zone in cryogenic high speed milling of inconel 718 alloy.  - jurnal teknologi.  1-7. 

norashikin rahman, baba md deros*, mohd nizam ab rahman, jaharah a. ghani, chairul saleh.  (2015).  a study benchmarking understanding, knowledge and implementation barriers in malaysian oil palm industry.  - jurnal teknologi (sciences & engineering).  65-70. 

natasha a. raof , jaharah a. ghani, junaidi syarif, che hassan che haron, musfirah abdul hadi.  (2014).  comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning aisi 4340 alloy steel.  - world virtual conference on advanced research in mechanical and materials engineering location: kuala lumpur, malaysia.  7-11. 

zaliha wahid, norhamidi muhamad, shahrir abdullah, jaharah a. ghani.  (2014).  the influence of temperature dependant parameters in plastic 0.0nd metal injection molding using taguchi method.  - jurnal teknologi.  51-56. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2014).  a wireless system and embedded sensors on spindle rotating tool for condition monitoring.  - advanced science letters.  1829-1832. 

m. a. hadi, j. a. ghani, c. h. che haron, m. s. kasim.  (2014).  investigation on wear behavior and chip formation during up-milling and down-milling operations for inconel 718.  - jurnal teknologi (sciences and engineering).  66(3): 15-21. 

akm aminul islam, zahira yaakob, jaharah a ghani, nurina anuar.  (2014).  biomass and bioenergy applications.  - 31-62. 

natasha a.r., othman h., ghani j.a., che haron c.h., syarif j..  (2014).  chip formation and coefficient of friction in turning s45c medium carbon steel.  - international journal of mechanical and mechatronics engineering.  89 - 92. 

baba md deros, darliana mohamad, dian darina indah daruis, ahmad rithaudden yusoff, jaharah a. ghani and chairul saleh.  (2014).  incorporating anthropometrics data in designing drivers seat for malaysian made compact cars.  - advances in natural and applied sciences.  8(6):915-919. 

shahrum abdullah, jaharah a ghani,wan mohd faizal wan mahmood, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad.  (2014).  cadangan pembangunan rubrik untuk penilaian kejuruteraan kompleks dalam projek ilmiah.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm. 

shahrum abdullah, jaharah ab ghani, norhamidi muhamad, dzuraidah abd wahab, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad, zaliha wahid.  (2014).  kkkp 4415 projek industri : kajian kes penilaian kejuruteraan kompleks dalam program pembuatan.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm. 

musfirah abdul hadi, jaharah a. ghani, c.h. che haron, natasha a. raof.  (2014).  tribological characterization of the cutting zone in milling nickel based alloy.  - world virtual conference on advanced research in mechanical and materials engineering location: kuala lumpur, malaysia.  12-16. 

s.h. tomadi, j.a. ghani, c.h. che haron, a.r. daud.  (2014).  optimization of cutting parameters for end milling alsi/aln metal matrix composite using the taguchi method.  - materials science forum (15th international conference on advances in materials and processing technologies, ampt 2012). 

m.s.said, j.a.ghani, che hassan c.h, shahrizan yusoff, m.a. selamat, r.othman.  (2014).  tool wear and surface roughness when machining alsi /aln metal matrix composite using uncoated carbide cutting tool.  - materials science forum (15th international conference on advances in materials and processing technologies, ampt 2012). 

m.s.said, m.s.yusoff, che hassan c.h, m.a. selamat,j.a. shukur, j.a.ghani.  (2014).  tool wear in machining alsi/alnmetal matrix composite 10 wt% reinforcement using uncoated cutting tool.  - applied mechanics and materials / trans tech publications, switzerland. 

jaharah a. ghani, muhammad rizal, che hassan che haron.  (2014).  performance of green machining: a comparative study of turning ductile cast iron fcd700.  - journal of cleaner production.  289-292. 

mohd nizam ab. rahman, noor suhana mohd zubir, raden achmad chairdino leuveano, jaharah a. ghani and wan mohd faizal wan mahmood.  (2014).  reliability study of solder paste alloy for the improvement of solder joint at surface mount fine-pitch components.  - materials.  7706-7721. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, and che hassan che haron1,.  (2014).  i-kaztm-based analysis of cutting force signals for tool condition.  - applied mechanics and materials / trans tech publications, switzerland. 

mohamad amir shafiq tahir, jaharah a. ghani, muhammad rizal, mohd zaki nuawi,che hassan che haron.  (2014).  prediction of tool eear for ball end nose in milling inconel 718 using a feed forward back propagation neural network.  - australian journal of basic and applied sciences,.  8(5): 383-390. 

s. h. tomadi, j. a. ghani, c. h. che haron, m. s. kasim, a. r. daud.  (2014).  optimization of cutting parameters of multiple performance characteristics in end milling of alsi/ain mmctaguchi method and grey relational analysis.  - jurnal teknologi.  68(4):33-40. 

m. s. said, j. a. ghani, r. othman, m. a. selamat, n. n. wand, che hassan, c. h..  (2014).  surface roughness and chip formation of alsi/ain metal matrix composite by end milling machining using the taguchi method.  - jurnal teknologi.  68(4): 13-17. 

haris jamaluddin, jaharah a. ghani, mohd nizam ab. rahman, baba md. deros.  (2014).  development of training kit for learning taguchi method and design of experiments.  - jurnal teknologi.  68(4): 19-25. 

salah al-zubaidi, jaharah abdul ghani, che hassan che haron.  (2014).  prediction of tool life when end milling of ti6al4v alloy using hybrid learning system.  - arabian journal for science and engineering.  39(6):5095-5111. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  fabrication of zirconia-toughened alumina parts by powder injection molding process: optimized processing parameters.  - ceramics international.  40: 273-280. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2014).  binder removal via a two-stage debinding process for ceramic injection molding parts.  - ceramics international.  40(2014):2819-2824. 

ezrin hani sukadarin, baba md deros, jaharah a. ghani, ahmad rasdan ismai.  (2014).  a review of work related musculoskeletal problems in agricultural industry.  - australian journal of basic & applied sciences.  56-59. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi and che hassan che haron.  (2014).  a review of sensor system and application in milling process for tool condition monitoring.  - research journal of applied sciences, engineering and technology.  7(10): 2083-2097. 

ali nurrakhmad siregar, wan mohd faizal wan mahmod, jaharah a. ghani, che hassan che haron, muhammad rizal.  (2014).  design and analysis of single screw extruder for jatropha seeds using finite element method.  - research journal of applied sciences, engineering and technology.  7(10):2098-2105. 

ms kasim, ch che haron, ja ghani, ma azam, rizamshah, ma md ali and ms a aziz.  (2014).  the influence of cutting parameter on heat generation in high-speed milling inconel 718 under mql condition.  - journal of scientific & industrial research.  73:62-65. 

muhammad rizal,b, jaharah a. ghani, mohd zaki nuawi, mohamad amir shafiq mohd tahir, che hassan che haron.  (2014).  a comparative study of i-kaz based signal analysis techniques: application to detect tool wear during turning process.  - jurnal teknologi.  66(3):99-105. 

muhammad afif ariffin, wan mohd faizal wan mahmood, zambri harun, and nurul atiqah izzati md ishak, mohd nizam ab rahman, jaharah a ghani.  (2014).  palm wastes biochar as fuel, soil amendment and activate carbon.  - international technical conference 2014 (itc 2014) / chung ang university, seoul, korea.  315-322. 

abdullah ismail, jaharah a. ghani, mohd nizam ab rahman, baba md deros, and che hassan che haron.  (2014).  application of lean six sigma tools for cycle time reduction in manufacturing: case study in biopharmaceutical industry.  - arabian journal for science and engineering.  1449-1463. 

m.a. sulaiman, c.h. che haron, j.a. ghani & m.s. kasim.  (2014).  effect of high-speed parameters on uncoated carbide tool in finish turning titanium ti-6al-4v eli.  - sains malaysiana.  43(1): 111-116. 

baba md deros, ahmad rasdan ismail, jaharah a. ghani and mohd yusri mohd yusof.  (2014).  conformity to occupational safety and health regulations in malaysian small and medium enterprises.  - american journal of applied sciences.  11(3): 499-504. 

s.k. kamarudin,n.s. shamsul, j.a. ghani, s.k. chia , h.s. liew , a.s. samsudin.  (2013).  production of methanol from biomass waste via pyrolysis.  - bioresource technology.  129:463-468. 

salah al-zubaidi, jaharah a. ghani, che hassan che haron.  (2013).  optimization of cutting conditions for end milling of ti6al4v alloy by using a gravitational search algorithm (gsa).  - meccanica.  48(7):1701-1715. 

jaharah a. ghani, che hassan che haron, siti hartini hamdan, ahmad yasir md said, siti haryani tomadi.  (2013).  failure mode analysis of carbide cutting tools used for machining titanium alloy.  - ceramics international.  39(4):4449-4456. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  optimum powder loading of feedstock based on an alumina-zirconia powder for ceramic injection molding.  - advanced materials research. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, and jaharah a. ghani.  (2013).  effects of injection temperature and pressure on green part density for ceramic injection molding.  - advanced materials research. 

jaharah a. ghani, haris jamaluddin, mohd nizam ab. rahman and baba md. deros.  (2013).  philosophy of taguchi approach and method in design of experiment.  - asian journal of scientific research.  6(1):27-37. 

z. karim, m.z. nuawi, j.a. ghani, e.a. azrulhisham and s. abdullah.  (2013).  development of machining condition monitoring system using piezoelectric sensor analyzed by i-kaz multilevel method.  - world applied sciences journal.  21(2):264-268. 

muhammad rizal, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2013).  online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system.  - applied soft computing.  13(4):1960-1968. 

z. karim, m.z .nuawi, a.y. md. said, j.a. ghani & s. abdullah.  (2013).  integrated kurtosis-based algorithm for z-notch filter (i-kaztm) multilevel coefficients responses toward the simultaneous changes in amplitude and frequency of signals.  - journal of applied sciences.  13(2):232-241. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

s.h. tomadi, j.a. ghani, c.h. che haron and a.r. daud.  (2013).  optimization of cutting parameters on tool life and surface roughness in end milling of alsi/aln mmc - taguchi method and grey relational analysis.  - 1st international conference on robust quality engineering (icrqe2013) / utm kuala lumpur. 

tasirin, s.m., puspasari, i., xing, l.j., yaakob, z., ghani, j.a.g.  (2013).  energy optimization of fluidized bed drying of orange peel using taguchi method.  - world applied sciences journal.  26 (12):1602-1609. 

m.k. nor khairusshima, c.h. che hassan, a.g. jaharah, a.k.m. amin, a.n. md idriss.  (2013).  effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic.  - wear.  302:1113-1123. 

z. wahid, n. muhamad, j.a. ghani.  (2013).  effect of temperature related parameters in plastic and metal injection molding process using taguchi method.  - 1st international conference on robust quality engineering (icrqe2013) / utm kuala lumpur. 

s.h. tomadi, j.a. ghani, c.h. che haron, m.s. kasim, m.h. abd kadir and a.r. daud.  (2013).  surface integrity of newly developed of alsi/aln metal matrix composite during end milling under dry cutting conditions.  - journal of applied sciences, engineering and technology.  6(6):1129-1134. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

m. a. hadi, j.a. ghani, c.h. che haron, m. s. kasim.  (2013).  comparison between up-milling and down-milling operations on tool wear in milling inconel 718.  - procedia engineering - the malaysian international tribology conference 2013 (mitc2013). 

muhammad rizala, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2013).  the application of i-kaztm-based method for tool wear monitoring using cutting force signal.  - procedia engineering -the malaysian international tribology conference 2013 (mitc2013). 

z. karim, izatul h.a.r., s.a.s. azuan, mastura s., a.y.m. said, a.r. bahari, j.a. ghani, m.z. nuawi.  (2013).  material mechanical property correlation study using vibration signal analysis.  - australian journal of basic and applied sciences.  7(4):94-99. 

m.s. kasim, c.h. che haron, j.a. ghani, a.i. gusri, m.z.a. yazid & m.a. sulaiman.  (2013).  tool life of tialn pvd coated carbide tool in high-speed end milling of untreated inconel 718 under minimum quantity lubrication condition.  - sains malaysiana.  42(12):1721-1726. 

sukadarin, e.h., deros, b.m., ghani, j.a., ismail, a.r., mokthar, m.m. and mohamad, d..  (2013).  investigation of ergonomics risk factors for musculoskeletal disorders among oil palm workers using quick exposure check.  - advanced engineering forum. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad, jaharah a. ghani.  (2013).  rheological properties of zirconia toughened alumina powder for ceramic injection molding.  - advanced materials research. 

m.j. ghazali, n.i.i. mansor, m.z. nuawi, j.a. ghani.  (2013).  facile wear failure monitoring of commercial bearing alloys using i-kaz method.  - engineering failure analysis.  35:545-553. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2013).  prediction of surface roughness when end milling ti6al4v alloy using adaptive neurofuzzy inference system.  - modelling and simulation in engineering.  2013:Article ID 932094. 

m.s. kasim, c.h. che haron, j.a. ghani, m.a. sulaiman, m.z.a. yazid.  (2013).  wear mechanism and notch wear location prediction model in ball nose end milling of inconel 718.  - wear.  302:1171-1179. 

m. j. ghazali, a. jemat, z. sajuri, a. k. a. mohd ihsan, j. a. ghani, w. m. f. w. mahmood, t. i. mohamad.  (2013).  taught masters of engineering programme student perceptions on research methodology course in research project.  - international conference on engineering education (icee) 2013. 

sarizal md ani, andanastuti muchtar, norhamidi muhamad and jaharah a. ghani.  (2013).  pencirian keseragaman campuran dan sifat reologi serbuk alumina-zirkonia untuk pengacuan suntikan seramik.  - sains malaysiana.  42(9):1311-1317. 

n. khairusshima, m. k., che hassan, c. h, jaharah, a. g, amin, a. k. m..  (2012).  the effect of milling parameters on laminated carbon fibre reinforced plastic (cfrp).  - jurnal teknologi.  59(2):203-207. 

nor khairusshima m.k, che hassan c.h, jaharah a. g, nurul amin akm.  (2012).  tool wear and surface roughness on milling carbon fiber-reinforced plastic using chilled air.  - journal of asian scientific research.  2(11):593-598. 

mohd faizal mat tahir, zaliha wahid, zainuddin sajuri, shahrum abdullah, jaharah ab. ghani, ahmad kamal ariffin mohd ihsan, abu bakar sulong, mohd anas mohd sabri, norkamaliana khamis.  (2012).  pengukuran dan penilaian secara langsung bagi hasil pembelajaran kursus di jabatan kejuruteraan mekanik dan bahan : kesan terhadap penambahbaikan berterusan..  - kongres pengajaran dan pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, zainuddin sajuri, shahrum abdullah, ahmad kamal ariffin mohd ihsan, abu bakar sulong, jaharah ab ghani, mohd anas mohd sabri.  (2012).  pengukuran dan penilaian secara langsung bagi hasil program kejuruteraan mekanik : kesan terhadap penambahbaiakan berterusan.  - kongres pengajaran dan pembelajaran ukm 2012 -seminar pendidikan kejuruteraan dan alam bina 2012. 

jaharah a. ghani, yeong shoot kian, stephanie tan chia ven, zahira yaakob, and che hassan che haron.  (2012).  performance of biodegradable palm oil coolant in machining process.  - journal of biobased materials and bioenergy.  6:1-4. 

wan mohd faizal wan mahmood, jaharah a ghani, junaidi syarif.  (2012).  final year project as a potential mechanism to sustain postgraduate programs.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012. 

afifi zainal, zahira yaakob, mohd sobri takriff, renganathan rajkumar, and jaharah abdul ghani.  (2012).  phycoremediation in anaerobically digested palm oil mill effluent using cyanobacterium, spirulina platensis.  - journal of biobased materials and bioenergy.  6:1-6. 

musfirah a.h, jaharah a.g.  (2012).  magnesium and aluminum alloys in automotive industry.  - journal of applied sciences research.  8(9):4865-4875. 

siow ping chuan, jaharah a. ghani, siti haryani tomadi and che hassan che hassan.  (2012).  analysis of ti-base hard coating performance in machining process: a review.  - journal of applied sciences.  12(8):1882-1890. 

jaharah a. ghani, poh siang jye, che hassan che haron, muhammad rizal, mohd zaki nuawi.  (2012).  determination of sensor location for cutting tool deflection using finite element method simulation.  - proceedings of the institution of mechanical engineers, part c: journal of mechanical engineering science.  226(9):2373-2377. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2012).  application of artificial neural networks in prediction tool life of pvd coated carbide when end milling of ti6al4v alloy.  - international journal of mechanics.  6(3):179-186. 

m.a. sulaiman, c.h. che haron, j.a. ghani, m.s. kasim.  (2012).  the study of wear process on uncoated carbide cutting tool in machining titanium alloy.  - journal of applied sciences research.  8(9):4821-4827. 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2012).  wear monitoring of connecting rod bearing via air-borne method analyzed by using i-kaz tm multi level value.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research). 

rizauddin ramli, roazam ahmad, jaharah abd ghani.  (2012).  kerf width optimization in wire-cut electrical discharge machine by using taguchi method.  - jurnal teknologi (sciences & engineering).  59:207-211. 

suhartini mohd jainury, rizauddin ramli,mohd nizam abd rahman,jaharah abd ghani, dzuraidah abd wahab and azhari omar.  (2012).  implementation of set parts system in malaysian automotive industry.  - proceedings of the 2012 international conference on industrial engineering and operations management istanbul, turkey,. 

a.r. natasha, j.a. ghani, c.h.c. haron, j. syarif.  (2012).  the effect of cryogenic application on surface integrity in manufacturing process: a review.  - journal of applied sciences research.  8(9):4880-4890. 

salah alden ghasimi, rizauddin ramli, jaharah abd ghani and nizaroyani saibani.  (2012).  inventory control for defective goods supply chain by determination of production period length.  - proceedings of the 2012 international conference on industrial engineering and operations management. istanbul, turkey,. 

jaharah a. ghani, haris jamaluddin, rizauddin ramli, mohd nizam ab rahman, baba md deros and che hassan che haron.  (2012).  doe insolving industrial problem: case study of the application of taguchi method in riveting process.  - proceedings of the 2012 international conference on industrial engineering and operations management,istanbul turkey. 

j. a. ghani, m. rizal, m. zaki nuawi, c. h. che haron.  (2012).  development of an adequate online tool wear monitoring system in turning process using low cost sensor.  - advanced science letters.  13:702-706. 

wan mohd hirwani wan hussain, mohd nizam abdul rahman, jaharah a. ghani, wan kamal mujani, zinatul ashiqin zainol and noor inayah yaakub.  (2012).  planning production and control: design of experiments (doe) in legal service industry.  - research journal of applied sciences, engineering and technology.  4(12):1684-1689. 

rizauddin ramli, dzuraidah abd wahab, jaharah abd ghani and raime m. zain.  (2012).  a comparison of lifted lead defect inspection system for surface mount technology.  - journal of scientific and industrial research.  71(5):330-333. 

aminah ishak, jaharah a. ghani, che hassan che haron.  (2012).  penentuan faktor yang mempengaruhi daya dan taburan tegasan semasa pemesinan besi tuangan mulur (fcd 500) secara simulasi.  - sains malaysiana.  41(12):1605-1612. 

jaharah a. ghani, poh siang jye, che hassan che haron, muhammad rizal, mohd zaki nuawi.  (2012).  relationship between measurement of cutting force and sensor location in turning process.  - jurnal teknologi.  59:91-94. 

baba md deros *, nizaroyani saibani, bahrim yunos, mohd nizam ab. rahman, jaharah a. ghani.  (2012).  evaluation of training effectiveness on advanced quality management practices management practices.  - procedia social and behavioral sciences - international conference on teaching and learning in higher education (ictlhe 2012) in conjunction with rcee & rhed 2012. 

deros, b. m., khamis, n. k., ghani, j.a. and yusoff, a.r.m., salleh, c..  (2012).  a study on common risks and body parts complaints by standing workstation female operators in an electronics product manufacturingcompany.  - proceedings of the 11th global congress on manufacturing and management (gcmm2012), 28-30 november 2012, school of engineering, aut university, auckland, new zealand. 

gusri akhyar ibrahim, che hassan che haron, jaharah abdul ghani, ahmad yasir moh. said, and moh. zaid abu yazid.  (2011).  performance of pvd-coated carbide tools when turning inconel 718 in dry machining.  - advances in mechanical engineering.  Article ID 790975:1-7. 

j. a. ghani, k. othman, m. n. a. rahman, b. m. deros and c. h. c. haron.  (2011).  machined surface of fcd 700 ductile cast iron in a dry turning environment using carbide tools.  - international journal of mechanical and materials engineering.  6(3):362-366. 

s.h. tomadi, j.a. ghani, che hassan c.h., a.r. daud.  (2011).  effect of machining parameters on the tool wear and surface roughness of al-aln mmc in end milling machining.  - engineering e-transaction.  6(2):159-163. 

p. c. siow, j.a. ghani, s. c. v. tan.  (2011).  the wear progression of tin coated carbide insert in turning fcd 700 cast iron.  - engineering e-transaction.  6(2):152-157. 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624. 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2011).  optimization of integrated kurtosis-based algorithm for z-filter (i-kaz ) tm coefficient using multi level signal decomposition technique.  - world applied sciences journal.  14 (10): 1541-1548. 

jaharah a.ghani, goh gokyeong, and che hassan che haron.  (2011).  surface integrity of aisi h13 in end milling and electrical discharge machining process.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research). 

burhanuddin, y., haron, c.h.c., ghani, j.a..  (2011).  the effect of tool edge geometry on tool performance and surface integrity in turning ti-6al-4v alloys.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research). 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2011).  application of fem in investigating machining performance.  - international conference on advances in materials and processing technologies, ampt 2009; 26 october 2009 through 29 october 2009 (advanced materials research). 

deros b.m., mohamad d., idris m.h.m., rahman m.n.a., ghani j.a., ismail a.r.  (2011).  setup time reduction in an automotive battery assembly line.  - international journal of systems applications, engineering & development.  5(5): 618-625. 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2011).  modeling and simulation of temperature generated on work piece and chip formation in orthogonal machining.  - international review of mechanical engineering.  5(2):340-348. 

salah al-zubaidi, jaharah a. ghani, and che hassan che haron.  (2011).  application of ann in milling process: a review.  - modelling and simulation in engineering.  art. no. 696275. 

deros b.m., mohamad d., idris m.h.m., rahman m.n.a., ghani j.a., ismail a.r..  (2011).  cost saving in an automotive battery assembly line using setup time reduction.  - 11th wseas international conference on robotics, control and manufacturing technology (rocom `11). 

ibrahim g.a., che haron c.h., ghani j.a..  (2011).  evaluation of pvd-inserts performance and surface integrity when turning ti-6al-4v eli under dry machining.  - international conference on advances in materials and processing technologies, ampt 2006 (advanced materials research ). 

malihe manzouri, mohd nizam ab rahman, haslina arshad, jaharah a. ghani.  (2011).  cutting down the difficulties of scm implementation: a comparison between iranian and malaysian companies.  - applied mechanics and materials. 

haron, chc; ghani, ja; kasim, ms; soon, tk; gusri, ai; sulaiman, ma.  (2011).  surface integrity of inconel 718 under mql condition.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen (advanced materials research). 

mohd nizam ab. rahman, harlina wasilan, baba md deros and jaharah a. ghani.  (2011).  barriers of scm in smes.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing(applied mechanics and materials). 

z. effendi, r. ramli and j.a. ghani.  (2011).  application of back propagation diagnostic model for fruit maturity classification: case jatropha curcas.  - australian journal of basic and applied sciences.  5(3):134-140. 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros and a.g. jaharah.  (2011).  improving production line performance: a case study.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials). 

jaharah a. ghani, muhammad rizal, ahmad sayuti, mohd zaki nuawi, rizauddin ramli, baba deros, che hassan che haron.  (2011).  online tool wear monitoring using portable digital assistant (pda).  - international journal of the physical sciences.  6(16):3952-3957. 

mohd fazuri abdullah, abu bakar sulong, ilman hakimi chua, che hassan che haron, jaharah a. ghani.  (2010).  effects of insert nose radius and machining parameters on the surface roughness of stainless steel 316l.  - key engineering materials. 

z. effendi, r. ramli and j.a. ghani.  (2010).  a back propagation neural networks for grading jatropha curcas fruits maturity.  - american journal of applied sciences.  7(3):390-394. 

gusri akhyar ibrahim, che hassan che haron and jaharah abd ghani.  (2010).  tool wear performance of cvd-insert during machining of ti-6%al-4%v eli at high cutting speed.  - key engineering materials. 

h. yanda, j.a. ghani, m.n.a.m. rodzi, k. othman and c.h.c. haron.  (2010).  optimization of material removal rate, surface roughness and tool life on conventional dry turning of fcd700.  - international journal of mechanical and materials engineering (ijmme).  5(2):182-190. 

jaharah a. ghani, mohd noor azmi mohd rodzi, noordin ibrahim and che hassan che haron.  (2010).  prestasi mata alat karbida semasa mengisar hujung besi tuang fc 250 dalam keadaan kering dan menggunakan bendalir pemotong.  - journal of physical science.  21(2):67-79. 

jaharah a. ghani, mohd nor azmi mohd rodzi, mohd zaki nuawi,kamal othman, mohd. nizam ab. rahman, che hassan che haron, and baba md deros.  (2010).  application of taguchi method for analyzing factors affecting the performance of coated carbide tool when turning fcd700 in dry cutting condition.  - aip conference proceedings - international conference on advances in materials and processing technologies. vol. 1315. 

jaharah a. ghani, goh geok yong, che hassan che haron, ahmad rasdan ismail, dan baba md deros.  (2010).  keutuhan permukaan aisi h13 keluli terkeras dalam proses pemesinan nyahcas elektrik (edm).  - journal institution of engineers malaysia.  10(2):27-33. 

hendri yanda, jaharah a. ghani, che hassan che haron.  (2010).  effect of rake angle on stress, strain and temperature on the edge of carbide cutting tool in orthogonal cutting using fem simulation.  - itb journal of engineering science.  42B(2):179-194. 

mohd nor azmi mohd rodzi, jaharah a.g., eghawail a.m., kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  performance of coated carbide tool in green turning of fcd 700 ductile cast iron.  - proceedings of the international multiconference of engineers and computer scientists 2010, imecs 2010. 

jaharah a.ghani, mohd nor azmi mohd rodzi, kamal othman and che hassan che haron.  (2010).  tool life and surface roughness of fcd 700 ductile cast iron when dry turning using carbide tool.  - advanced materials research. 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hassan che haron, rizauddin ramli.  (2010).  statistical analysis for detection cutting tool wear based on regression model.  - proceedings of the international multiconference of engineers and computer scientists imecs 2010. 

mohd nor azmi mohd rodzi , jaharah a.g. , eghawail a.m. , kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  iaeng transaction in engineering technologies vol 5.  - 260-265. 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hasan che haron, and rizauddin ramlia.  (2010).  iaeng transactions on engineering technologies volume 5.  - 249-260. 

baba md. deros, dian darina indah daruis, ahmad rasdan ismail, nurfarhana abdullah sawal and jaharah a. ghani.  (2010).  work-related musculoskeletal disorders among workers` performing manual material handling work in an automotive manufacturing company.  - american journal of applied sciences.  7(8):1087-1092. 

g.a. ibrahim, c.h. che haron, j.a. ghani.  (2010).  tool wear mechanism in continuous cutting of difficult-to-cut material under dry machining.  - advanced materials research. 

g.a. ibrahim, c.h. che haron, j.a. ghani, h. arshad.  (2010).  taguchi optimization method for surface roughness and material removal rate in turning of ti-6al-4v eli.  - international review of mechanical engineering (ireme).  4(3):216-221. 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hassan che haron, mariyam jameelah ghazali, and mohd nizam ab rahman.  (2010).  online cutting tool wear monitoring using i-kaz method and new regression model.  - advanced materials research. 

mariyam jameelah ghazali, mahamad noor wahab, abdul razak daud and jaharah ab. ghani.  (2010).  effect of aged ain reinforced al-si alloys on dry sliding wear behaviour.  - advanced materials research. 

zulham effendi, rizauddin ramli and jaharah abdul ghani.  (2009).  matched pattern system of jatropha curcas fruits by using back propagation (bp).  - 2nd asia pasific conference on manufacturing system (apcoms 2009). 

z. effendi, r. ramli, j.a.ghani, and m. n. a. rahman.  (2009).  pattern recognition system of jatropha curcas fruits using back propagation.  - 2009 ieee international conference on signal and image processing applications (icsipa). 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, ahmad rasdan ismail, jaharah a. ghani. baba md. deros, norhamidi muhamad & suriani abdul rahman.  (2009).  improving process performance through smes-spc.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009). 

zulham effendi, rizauddin ramli, jaharah a. ghani and zahira yaakob.  (2009).  jatropha curcas fruits recognition system by using neural networks.  - seminar iii advanced manufacturing research group 2009 (amreg 09), uniten kajang, 29 july 2009. 

hendri yanda, jaharah a.ghani, che hassan che haron.  (2009).  effect of rake and clearance angles on the wear of carbide cutting tool.  - engineering e-transaction.  4(1) June 2009,7-13. 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, ahmad sayuti, mohd nizam ab rahman, and che hassan che haron.  (2009).  new regression model and i-kaz method for online cutting tool wear monitoring.  - world academy of science, engineering and technolog. 

a. g. jaharah, mohd nor azmi mohd rodzi, a. abdul rahman, mohd nizam ab. rahman and c. h. che hassan.  (2009).  machinabilty of fcd 500 ductile cast iron using coated carbide tool in dry machining condition.  - international journal of mechanical and materials engineering (ijmme).  4(3):279-284. 

baba md deros, mohd nizam ab. rahman and jaharah a. ghani.  (2009).  a study on self-assessment practice using malaysian qmea criteria for improving organizational performance.  - journal of industrial technology.  18(2):41-58. 

g. a. ibrahim, c. h. che haron and j. a. ghani.  (2009).  progression and wear mechanism of cvd carbide tools in turning ti-6al-4v eli.  - international journal of mechanical and materials engineering (ijmme).  4(1):35-41. 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, jaharah a ghani, baba md deros, nurhamidi mohamad, ahmad rasdan ismail.  (2009).  the implementation of spc in malaysian manufacturing companies.  - european journal of scientific research.  26(3):453-464. 

a. g. jaharah, i. a. choudhury, h.h. masjuki and c. h. che hassan.  (2009).  surface integrity of aisih13 tool steel in end milling process.  - international journal of mechanical and materials engineering (ijmme).  4(1):88-92. 

g.a. ibrahim, c.h. che haron, j.a. ghani.  (2009).  the effect of dry machining on surface integrity of titanium alloy ti-6a1-4v eli.  - journal of applied sciences.  9(1):121-127. 

hendri y., jaharah a.g., che hassan c.h..  (2009).  machining and cutting simulation: effect of rake angle and clearance angle on wear cutting insert carbide.  - national tribology conference 2009 (ntc2009) - universiti malaya. 

jaharah a.g., abdul rahman a., mohd nor azmi, and che hassan c.h..  (2009).  machinability of fcd 500 ductile cast iron using coated carbide tool in dry machining condition.  - national tribology conference 2009 (ntc2009) - universiti malaya. 

ahmad yasir m.s, che hassan c.h, jaharah a.g, nagi h.e, yanuar b and gusri a.i.  (2009).  machinalibilty of ti-6al-4v under dry and near dry condition using carbide tools.  - the open industrial and manufacturing engineering journal.  2:1-9.. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

m. j. ghazali, a. a. pauzi, c. h. azhari, j. a. ghani, a. b. sulong and r. mustafa.  (2009).  effect of starch binders in alumina coatings on aisi 316 l stainless steel for medical application.  - international journal of modern physics b.  23(6-7):1034-1039. 

baba md deros, mohd nizam ab rahman, jaharah a. ghani, dzuraidah abd wahab, mohd hazri hashim dan nor kamaliana khamis.  (2009).  role of senior management in tqm implementation in malaysian small and medium enteprises.  - journal - the institution of engineers, malaysia.  70(1):9-14. 

a. r. ismail, m. r .a. rani, z. k. m. makhbul, k. sopian, m.m. tahir, j.a. ghani, c. meier.  (2009).  optimization of environmental factors: a study at malaysian automotive industry.  - european journal of scientific research.  27(4):500-509. 

jaharah a.g, wahid s.w, che hassan c.h, nuawi m.z, mohd nizam ab rahman.  (2009).  the effect of uncoated carbide tool geometries in turning aisi 1045 using finite element analysis.  - european journal of scientific research.  28(2):271-277. 

jaharah a.g, che hassan c.h, muhamad n.  (2009).  machined surface of aisi h13 tools steels when end milling using p10 tin coated carbide tools.  - european journal of scientific research.  26(2):247-254. 

ab rahman m.n., zain r.m., ghani j.a., nopiah z.m., ismail a.r., rahman s.a..  (2009).  barriers to implementing an online spc system in malaysian automotive manufacturing companies.  - european journal of scientific research.  30(2):315-325. 

effendi z., ramli r., ghani j.a., yaakob z..  (2009).  development of jatropha curcas color grading system for ripeness evaluation.  - european journal of scientific research.  30(4):662-669. 

z. yaakob, jaharah a. g, s.k. kamaruddin, w.r.w. daud, k.l. lim.  (2009).  the effect of catalyst metal loading and temperature on the reduction of carbon monoxide concentration in hydrogen production by steam reforming of methanol (srm).  - european journal of scientific research.  26(2):238-246. 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

budiman h., omar m.z., jalar a., jaharah a.g..  (2009).  effect of water cooling on the production of al-si thixotropic feedstock by cooling slope casting.  - european journal of scientific research.  32(2):158-166. 

rahman, mna; wasilan, h; ismail, ar; ghani, ja; deros, bm.  (2009).  supply chain solutions for manufacturing companies.  - aebd `09: proceedings of the world multiconference on applied economics, business and development. 

ab rahman, mn; zain, rm; nopiah, zm; ismail, ar; deros, bm; rahman, sa; ghani, ja; muhamad, n.  (2009).  development of online smes-spc computer based system.  - proceedings of the 11th wseas international conference on automatic control, modeling and simulation - controlling, modeling and simulation. 

khamis, n; ab rahman, mn; jamaludin, kr; ismail, ar; ghani, ja; zulkifli, r.  (2009).  development of 5s practice checklist for manufacturing industry.  - world congress on engineering 2009, vols i and ii. 

ibrahim, g.a., che haron, c.h., ghani, j.a..  (2009).  surface integrity of ti-6al-4v eli when machined using coated carbide tools under dry cutting condition.  - international journal of mechanical and materials engineering.  4(2):191-196. 

mohd nor azmi, jaharah a. ghani, che hassan che haron.  (2008).  application of chilly air coolant in future machining process.  - prosiding seminar amreg 2008. 

y. burhanuddin, c.h. che haron, j.a. ghani dan a. k. m. ariffin.  (2008).  taksiran hayat perkakas pada pelarikan aloi titanium dengan perkakas pemotong cbn menggunakan kaedah faktoran pecahan.  - seminar amreg 08, 12 jun 2008. 

che hassan c.h, jaharah a.g., gusri a.i, yanuar b and ahmad yasir m.s..  (2008).  the effect of dry machining on surface integrity of titanium alloy ti-6% al-4% v eli.  - prosiding seminar amreg 08. 

nagi elmagribi, che hassan c.h., jaharah a. g., ahmad yasir m.s..  (2008).  performance of pvd coated cemented carbides under dry cutting of ti6al4v.  -

gusri a.i., che hassan c.h. and jaharah, a.g..  (2008).  pvd carbide tool performance and attainable surface quality during machining of aerospace alloy.  -

jaharah a. g., nuawi m.z., ahmad s. & che hassan, c.h..  (2008).  monitoring of tool wear in turning operations using cutting force signal.  - seminar ii - amreg 08, 17-18 december 2008, port dickson, malaysia. 

hendri y., jaharah a.g., che hassan c.h..  (2008).  the effect of cutting speed on turning aisi 1045 using carbide tool.  - prosiding seminar ii amreg 08. 

g.a.ibrahim, c.h. che haron, j.a.ghani.  (2008).  surface integrity of ti6al4v when machine using coated carbide tool in dry cutting condition.  - malaysian metallurgical conference -mmc 2008 3-4 december 2008. 

jaharah a. ghani, noordin ibrahim, che hassan che haron, dan mohd nizam ab. rahman.  (2008).  mekanisme haus mata alat karbida semasa mengisar hujung besi tuang kelabu menggunakan bendalir pemotong.  - malaysian metallurgical conference ? mmc 2008, 3-4 december 2008, ukm, bangi, malaysia. 

nagi elmagrabi, che hassan c.h., jaharah a.g., f. m. shuaeib.  (2008).  high speed milling of ti-6al-4v using coated carbide tools.  - european journal of scientific research.  22(2):153-162. 

b.m. deros, a. abd rashid, a. rasdan ismail, j.a. ghani.  (2008).  practical validation of ejector-less die bond pick-up system using design of experiment.  - 13th international conference on machine design and production (umtik2008), istanbul, turki. 

jaharah a. g., liang c. g., siti zaleha w., che hassan c.h., m.j. ghazali, m.z.omar and b.m.deros.  (2008).  the ewr of graphite and copper electrodes in electrical discharge machining (edm) of aisi h13 harden steel.  - proceedings of international conference on mechanical & manufacturing engineering (icme2008),. 

c. h. che haron, j. a. ghani, y. burhanuddin, y. k. seong, c. y. swee.  (2008).  copper and graphite electrodes performance in electrical-discharge machining of xw42 tool steel.  - journal of materials processing technology.  201(1-3):570-573. 

a. g. jaharah, c. g. liang, s.z. wahid, m. n. ab rahman and c. h. che hassan.  (2008).  performance of copper electrode in electrical discharge machining (edm) of aisi h13 harden steel.  - international journal of mechanical and materials engineering.  3(1):25-29. 

rosmaizura mohd zain, mohd nizam ab rahman, zulkifli mohd nopiah, jaharah a ghani, baba md deros, nurhamidi mohamad and ahmad rasdan ismail.  (2008).  kajian kes perlaksanaan proses kawalan statistik (spc) di industri pembuatan malaysia: permasalahan dalam perisian spc.  - seminar 1 amreg 2008. 

n. h. elmagrabi, c. h. che haron, jaharah a. ghani, gusri a. i., yasir m.s., yanur b..  (2008).  dry machining of titanium alloys and its impact on the environment and tool life.  - international conference on environmental research and technology (icert 2008). 

jaharah a.g., hendri y., che hassan c.h., ramli r., yaakob z..  (2008).  simulation of turning process of aisi 1045 and carbide tool using finite element method.  - 7th wseas international conference on computational intelligent, man-machine systems and cybernetics(cimmacs08), cairo, egypt. 

m.s. ahmad yasir, c.h. che hassan, a.g. jaharah, m. norhamidi, h.e. nagi, b. yanuar, a.i. gusri.  (2008).  wear mechanism and performance of pvd coated tungsten carbide when milling of ti-6al-4v under mql.  - 11th cirp conference on modeling of machining operations. 

n. h. elmagrabi, c. h. che haron, f.m. shuaeib, jaharah a.ghani.  (2008).  optimization of tool life in slot milling of titanium alloys ti-6al-4v.  - advances in materials & processing technologies 2008. 

mariyam jameelah ghazali, jaharah a. ghani, shahrum abdullah, huda abdullah, mohd zaki nuawi dan mohd hanif md saad.  (2008).  development of low cost technique for wear monitoring of connecting rod bore.  - seminar pemantauan projek penyelidikan gup 2007. 

jaharah a.g., che hassan, ghazali m.j.,md.deros b., m.z. nuawi, m.z..  (2008).  performance of uncoated carbide tool when machining cast iron in dry condition.  - 5 th international conference on advanced mateerial and processing, harbin, china, 2-5 sep 2008. 

m.s. ahmad yasir, c.h. che hassan, a.g. jaharah, m. norhamidi.  (2008).  wear mechanism and performance of pvd coated cemented carbides when milling of ti-6al-4v under dry and near dry conditions.  - american j. of engineering and applied sciences.  1(4):329-334. 

m.s. ahmad yasir, c.h. che hassan, a.g. jaharah, m.norhamidi, h.e. nagi , b yanuar, a.i. gusri.  (2008).  wear mechanism and performance of pvd coated cemented carbides when milling of ti-6al-4v under dry and near dry condition.  - 11th cirp conference on modeling of machining operations,national institute of standards and technology (nist),gaithersburg, md 20899 usa. 

achmad fauzie, siti kartom kamarudin, wan ramli wan daud, jaharah abdul ghani, edy herianto majlan.  (2008).  review reka bentuk dan fabrikasi dmfc untuk laptop.  - kolokium dan sanggar kerja institut sel fuel. 

zulham effendi, rizauddin ramli and jaharah abdul ghani.  (2008).  development of grading system jatropha by using color histogram.  - proceedings of seminar 2 advanced manufacturing research group, goumann resort, port dickson, negeri sembilan, 16-17 december 2008. 

siti zaleha, jaharah a. ghani, che hassan che haron, mohd zaki nuawi.  (2008).  kesan geometri mata alat karbida tidak bersalut dalam proses pelarikan keluli karbon aisi 1045 menggunakan kaedah unsur terhingga.  - seminar amreg 08. 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, jaharah a. ghani, baba md deros, nurhamidi mohamad and ahmad rasdan ismail.  (2008).  statistical process control in smes. a case study.  - proceedings of the 4th wseas/iasme international conference on dynamical systems and control (control`08). 

jaharah, ag; sayuti, a; nuawi, mz; che, hch; ramli, r; yaakob, z.  (2008).  tool wear monitoring by detecting the cutting force signal using c plus plus and vb languages.  - proceedings of the 7th wseas international conference on computational intelligence, man-machine systems and cybernetics (cimmacs `08) - recent advances in computational intelligence, man-machine syst. 

norhamidi muhamad,dzuraidah abd.wahab,zaliha wahid,nor kamaliana khamis,ahmad rasdan ismail,mohd nizam ab.rahman, jaharah a.ghani, baba md.deros dan che hassan che haron.  (2008).  pencapaian antribut pembelajaran pembelajaran berasaskan hasil:kaedah penilaian dan penambahbaikan.  - seminar pendidikan kejuruteraan & alam bina (peka 2008). 

jaharah a.ghani,norhamidi muhamad.  (2008).  kaedah pengredan projek ilmiah yang berkesan dan pemberian gred yang setaraf dengan universiti di peringkat antarabangsa.  - seminar pendidikan kejuruteraan dan alam bina (peka 2008). 

baba md deros, jaharah a. ghani, nor kamaliana khamis dan darliana mohamad.  (2008).  kajian terhadap prestasi pengajaran dan pembelajaran untuk kursus elektif ekonomi kejuruteraan.  - seminar pendidikan kejuruteraan dan alam bina 2008 (peka 2008). 

a.b. sulong, n. muhamad, m.j. ghazali and a.g. jaharah, soon huat tan, j.h. park.  (2008).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - the fifth international conference on advanced materials and processing, harbin, china. 

prof. dr. che hassan che haron, assoc. prof. dr.jaharah a ghani, assoc prof dr norhamidi muhamad, dr.dzuraidah abdul wahab, en.ahmad rashdan ismail.  (2008).  too life and wear mechanism of carbide tools during machining of inconel 718 superalloy under minimum quantity lubrication condition.  - seminar pemantauan projek penyelidikan (gup) 2007. 

prof. madya dr.jaharah a. ghani, dr.mohd zaki nuawi, prof. dr. che hassan che haron, dr.mariyam jameelah ghazali.  (2008).  non-contact on-line monitoring and measurement of cutting tool wear development during milling operation.  - seminar pemantauan projek penyelidikan (gup) 2007. 

norhamidi muhamad, dzuraidah abd wahab, nor kamaliana khamis, zaliha wahid, jaharah abd. ghani, baba md deros, che hasan che haron, mohd nizam ab rahman dan ahmad rasdan ismail.  (2008).  kajian pelaksanaan kaedah penilaian rakan sebaya dalam projek berkumpulan.  - seminar pendidikan kejuruteraan dan alam bina 2008 (peka 2008). 

a. r. ismail, m. r. a. rani, z. k. m. makhbul, j.a.ghani, m.tahir and r.zulkifli.  (2008).  optimum solution of environmental factors towards productivity improvement using taguchi method.  - proceedings of international conference on energy, environment, ecosystems and sustainable development (eeesd`08). 

ahmad sayuti, jaharah a. ghani, mohd zaki nuawi, che hassan che haron.  (2008).  pemantauan keadaan perkakas pemotong menggunakan isyarat daya pemotongan pada pda menggunakan matlab/c++.  -

zahira yaakob, siti rozaimah sheikh abdullah, siti kartom kamarudin, nurina anuar, jaharah abd ghani, masturah markom, yusoff ali dan norhisham tan kofli.  (2008).  biodiesel research and development group (fuel cell technology and renewable energy).  - research propectus : engineering 2008. 

h.h.habeeb,k.a.abou-el-hossein, bashir mohamad, jaharah a. ghani, and k.kadirgama,.  (2007).  investigating tool wear, tool life, and surface roughness when machining nickel alloy 242 using different cutting tools.  - asian journal of scientifuc research.  1(3):222-230. 

c.h.che haron, j.a.ghani and g.a. ibrahim.  (2007).  surface integrity of aisi d2 when turned using coated and uncoated carbide tools.  - int.j.precision engineering technology.  1(1):106-114. 

m.j. ghazali, j.a. ghani, m.z. omar.  (2007).  plastic deformation characteristics of worn precipitation-hardened aluminium alloys.  - international journal of mechanical & materials engineering.  2(2):125-129. 

a.g. jaharah,c.h. che haron, m.z. omar and m.j. ghazali.  (2007).  wear mechanism and failure mode of p10 tin coated carbide tools.  - int. j. precision technology.  1(1):115-122. 

m.z. omar , h.v. atkinson , p. kapranos , a.g. jaharah.  (2007).  mechanical properties and fracture surfaces of thixoformed hp9/4/30 steel.  - 10th esaform conference on material forming, pts a and b. 

jaharah a. ghani, baba md deros, jaafar sahari & ahmad kamal ariffin mohd ihsan.  (2007).  pelaksanaan penggunaan rubrik projek ilmiah program sarjana muda kejuruteraan mekanik dan pembuatan.  - seminar pendidikan kejuruteraan dan alam bina 2007. 

s.m. tasirin, s.k. kamarudin, j.a. ghani, k.f. lee,.  (2007).  optimization of drying parameters of bird`s eye chilli in a fluidized bed dryer.  - journal of food engineering.  80: 695-700.. 

r. fadhila, a.g. jaharah, m.z. omar, c.h.c. haron, m.j. ghazali, and c. h. azhari.  (2007).  austenite formation of steel-3401 subjected to rapid cooling process.  - int. j of mech and material.  2(2):150-153. 

mariyam jameelah ghazali, andanastuti muchtar, jaharah a. ghani.  (2006).  perbandingan prestasi akademik pelajar tahun dua dan tiga dalam mengikuti kursus pengukuran dan instrumentasi pada tahun yang sama..  - seminar pengajaran dan pembelaran berkesan 2006, esset, bangi. 

mohd. zaki n., jaharah a.g. & mohd jailani m.n..  (2005).  penentuan kehausan perkakas mesin dalam proses pengisaran menggunakan kaedah ikaz.  - proceedings of the national seminar on advanced processes and systems in manufacturing (apsim) 2005. 

j.a. ghani, c.h.c. hassan, i.a. choudhury, h.h. masjuki.  (2005).  the optimisation of milling parameters using taguchi method part 1: cutting force.  - proceedings of the national seminar on advanced processes and systems in manufacturing (apsim) 2005. 

y. burhanuddin, c.h. che hassan, and j. a. ghani,.  (2005).  tool-life model for turning of titanium by design of experiments.  - proceedings of the national seminar on advanced processes and systems in manufacturing, 17-18 may 2005, pp.51-60. 

firdaus m.h., mohd. zaki n, azami z., and jaharah a.g.,.  (2005).  permodelan arima terhadap isyarat daya pemesinan,.  - proceedings of the national seminar on advanced processes and systems in manufacturing (apsim) 2005.