Penerbitan Terkini

m.k.faidzi, s.abdullah, m.f.abdullah, a.h.azman, d.hui, s.s.k.singh.  (2021).  review of current trends for metal-based sandwich panel: failure mechanisms and their contribution factors.  - engineering failure analysis.  1-27. 

shahrum abdullah, salvinder singh, wan aizon w. ghopa, mohd anas mohd sabri, azhari shamsudeen.  (2021).  puspakom kpi validation (external assessor) march 2019 to february 2020.  - 1-274. 

l. abdullah, s.s.k. singh, s. abdullah, a.h. azman, a.k. ariffin.  (2021).  fatigue reliability and hazard assessment of road load strain data for determining the fatigue life characteristics.  - engineering failure analysis.  1-14. 

wan aizon w ghopa, zainuddin sajuri, mohd radzi abu mansor, azhari shamsudeen, shahrum abdullah, mohd zaidi omar, mohd esa baruji & mohd atif sholehuddin.  (2021).  statistik kemalangan pekerjaan melibatkan jentera berat di malaysia.  - jurnal kejuruteraan.  773-783. 

zainuddin bin sajuri;ahmad kamal ariffin bin mohd ihsan;mohd. zaidi bin omar;shahrum bin abdullah.  (2021).  computationally inverse model for the fatigue and fracture characterization of structural steel materials in corrosive environment.  -

airee afiq abd rahim, shahrum abdullah, salvinder singh karam singh and mohammad zaki nuawi.  (2021).  fatigue life analysis using wavelet-based signal decomposition.  - international journal of materials and product technology.  138-147. 

r. idris, s. abdullah, p. thamburaja & m. z. omar.  (2021).  predicting fatigue crack growth rate under block spectrum loading based on temperature evolution using the degradation-entropy generation theorem.  - international journal of fracture.  145-158. 

soffian noor mat saliah, noorsuhada md nor, noorhazlinda abd rahman, shahrumabdullah, mohdsubri tahir.  (2021).  evaluation of severely damaged reinforced concrete beam repaired with epoxy injection using acoustic emission technique.  - theoretical and applied fracture mechanics.  1-12. 

c.h. chin, s. abdullah, s.s.k. singh, d. schramm, a.k. ariffin.  (2021).  durability prediction of coil spring through multibody-dynamics-based strain generation.  - mechanical systems and signal processing.  580-601. 

n.h. anuar, s. abdullah, s.s.k. singh & a. arifin.  (2021).  characterisation of steel components fatigue life phenomenon based on magnetic flux leakage parameters.  - experimental techniques.  133-142. 

a. seharing, a. h. azman and s. abdullah.  (2021).  fatigue assessment of additively manufactured lattice structure: a review.  - proceedings of the 5th symposium on damage mechanism in materials and structures.  94-95. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin and d. schramm.  (2021).  neuro-fuzzy fatigue life assessment using the wavelet-based multifractality parameters.  - journal of mechanical science and technology.  439-447. 

mohd radzi abu mansor, zainuddin sajuri, wan aizon w ghopa, azhari shamsudeen, shahrum abdullah, mohd zaidi omar, mohd esa baruji, mohd atif sholehuddin.  (2021).  safety competency on heavy machinery: a comparison study between the importance and practices from site supervisor perceptions.  - journal of occupational safety and health.  57-66. 

azisyahirah azizan, mahzan johar, salvinder singh karam singh, shahrum abdullah, seyed saeid rahimian koloor, michal petr, king jye wong and mohd nasir tamin.  (2021).  an extended thickness-dependent moisture absorption model for unidirectional carbon/epoxy composites.  - polymers.  1-13. 

noorsuhada md nor, shahrum abdullah, soffian noor mat saliah.  (2021).  on the need to determine the acoustic emission trend for reinforced concrete beam fatigue damage.  - international journal of fatigue.  1-9. 

m. k. faidzi, s. abdullah, m. f. abdullah, a. h. azman, s. s. k. singh & d. hui.  (2021).  computational analysis on the different core configurations for metal sandwich panel under high velocity impact.  - soft computing.  10561-10574. 

c.h. chin, a.a.a. rahim, s. abdullah, s.s.k. singh, n. md nor.  (2021).  acceptability of the effective strain damage model for fatigue life assessment considering the load sequence effect for automotive coil spring.  - engineering failure analysis.  1-18. 

n.n.m. nasir, s. abdullah, s.s.k. singh, s.m. haris.  (2020).  risk-based life assessment of prediction models on suspension system for various road profiles.  - engineering failure analysis.  1-19. 

airee afiq abd rahim, shahrum abdullah, salvinder singh karam singh and mohammad zaki nuawi.  (2020).  selection of the optimum decomposition level using the discrete wavelet transform for automobile suspension system.  - journal of mechanical science and technology.  137-142. 

c.h. chin, s. abdullah, s.s.k. singh, a.k. ariffin, d. schramm.  (2020).  durability assessment of suspension coil spring considering the multifractality of road excitations.  - measurement.  1-14. 

asliah seharing, abdul hadi azman, shahrum abdullah.  (2020).  finite element analysis of gradient lattice structure patterns for bone implant design.  - international journal of structural integrity.  535-545. 

reza manouchehrynia, shahrum abdullah, salvinder singh karam singh.  (2020).  fatigue reliability assessment of an automobile coil spring under random strain loads using probabilistic technique.  - metals.  1-24. 

t.e. putra, s. abdullah, d. schramm.  (2020).  effect of cycle amplitude removal of fatigue strain loadings associated to signal energy characteristics.  - engineering failure analysis.  1-13. 

shahrum abdullah, salvinder singh karam singh, abdul hadi azman, muhamad razuhanafi mat yazid, hawa hishamuddin, wan aizon wan ghopa, aini hazwani shahrir, ahmad kamal ariffin mohd ihsan, dzuraidah abd. wahab.  (2020).  assessing the safety behaviour of the bus express driving condition from the passengers perspective.  - international journal of integrated engineering.  27-33. 

f mozafari, p thamburaja, a srinivasa, s abdullah.  (2020).  fatigue life prediction under variable amplitude loading using a microplasticity-based constitutive model.  - international journal of fatigue.  1-11. 

s.s.k. singh , s. abdullah, a.k. ariffin.  (2020).  fatigue reliability assessment in time domain using stochastic- induced random stress loads due to limited experimental data.  - engineering failure analysis.  1-15. 

salvinder singh karam singh, shahrum abdullah, syifa syuhaidah meor zainal.  (2020).  pendekatan keboleharapan penilaian hayat lesu.  - 109. 

mohammad nor fadly amar, dzuraidah abd wahab, rizauddin ramli, shahrum abdullah.  (2020).  perpetual motion machine as an alternative energy source for environmental sustainability: a review of its past and future outlook.  - solid state technology.  1594-1617. 

zainuddin sajuri, shahrum abdullah, mohd zaidi omar, mohd radzi abu mansor, wan aizon wan ghopa, azhari shamsudeen.  (2020).  kajian kompetensi kajian kompetensi pekerja terhadap jentera berat (heavy machinery).  - laporan perundingan ukm-niosh.  1-163. 

abdul hadi azman, salvinder singh karam singh, shahrum abdullah, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, dzuraidah abd wahab, ahmad kamal ariffin mohd ihsan.  (2020).  safety index mapping system for express bus, international science technology and engineering expo 2020.  - safety index mapping system for express bus, international science technology and engineering expo 2020.  1. 

syed muhamad firdaus, azli arifin, siti norbaya sahadan, shahrum abdullah.  (2020).  detection of high stress concentration zone using magnetic flux leakage method.  - international journal of structural integrity.  615-624. 

asliah seharing, abdul hadi azman, shahrum abdullah.  (2020).  a review on integration of lightweight gradient lattice structures in additive manufacturing parts.  - advances in mechanical engineering.  1-21. 

lennie abdullah, salvinder singh karam singh, shahrum abdullah, abdul hadi azman, ahmad kamal ariffin and yat sheng kong.  (2020).  the needs of power spectral density in fatigue life prediction of heavy vehicle leaf spring.  - journal of mechanical science and technology.  2341-2346. 

abdul hadi bin azman;shahrum bin abdullah.  (2020).  establishing design strategy for lightweight lattice structures using finite-element-method.  -

zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  -

salvinder singh a/l karam singh;shahrum bin abdullah.  (2020).  establishment of optimised multibody dynamics for the sustainable accelerated life cycle reliability.  -

s.m.firdaus,a. arifin, s. abdullah & n. md nor2.  (2020).  evaluating the damage mechanism characteristics of pipelines using magnetic flux detection.  - proceedings of virtual conference on computational and experimental mechanics 2020 (vccem2020).  25-26. 

shahrum abdullah, azli arifin, ahmad kamal ariffin mohd ihsan dan sity ainy nor mohamed.  (2020).  mekanik komputeran: eksperimen, model dan simulasi.  - 15. 

a h azman, s abdullah, s s k singh, m r m yazid, w a w ghopa, h hisamuddin, a h shahrir, a k ariffin, d a wahab, a azhar and m s solah.  (2020).  assessing the safety of express bus from passengers' perspective.  - iop conference series: materials science and engineering.  1-8. 

s s k singh, s abdullah, a h azman, n n m nasir, m r m yazid, h hishamuddin, w a w ghopa, a k ariffin, d a wahab, a h shahrir, a azhar and m s solah.  (2020).  responsibility of the bus operator in terms of safety and health: a malaysian case study.  - iop conference series: materials science and engineering.  1-8. 

shahrum abdullah, mohd faizal abdullah, wan nuraini m. jamil.  (2020).  ballistic performance of the steel-aluminium metal laminate panel for armoured vehicle.  - journal of mechanical engineering and sciences.  6452-6460. 

roslinda idris, shahrum abdullah, prakash thamburaja and mohd zaidi omar.  (2020).  prediction of fatigue crack growth rate based on entropy generation.  - entropy.  1-22. 

c.h. chin, s. abdullah, s.s.k. singh, a.k. ariffin, d. schramm.  (2019).  multifractal analysis for durability predictive criterion of suspension coil spring signal.  - proceedings of mechanical engineering research day.  139-141. 

c. h. chin, s. abdullah, s. s. k. singh, d. schramm, a. k. ariffin, a. a. a. rahim.  (2019).  durability assessment for random load signal of automobile suspension spring force using multibody dynamics.  - international journal of advanced control and automation system.  13-19. 

shahrum abdullah, mohd faizal abdullah, as zulkefli, nh mazlan.  (2019).  numerical impact strain response of multilayered steel aluminium plate using signal processing.  - journal of the brazilian society of mechanical sciences and engineering.  1-9. 

yat sheng kong, shahrum abdullah, dieter schramm, salvinder singh karam singh.  (2019).  determining optimal suspension system parameters for spring fatigue life using design of experiment.  - mechanics & industry.  1-10. 

nadia nurnajihah m. nasir, salvinder singh, shahrum abdullah and sallehuddin mohamed haris.  (2019).  accelerating the fatigue analysis based on strain signal using hilbert huang transform.  - international journal of structural integrity.  118-132. 

dzuraidah binti abd. wahab;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;azli bin arifin.  (2019).  a new durability analysis for efficient usage of automotive components in multiple life cycles for environmental sustainability.  - 1-5. 

mohd. zaki bin nuawi;jaharah bt. a ghani;shahrum bin abdullah;zulkifli bin mohd nopiah;zaliha binti wahid.  (2019).  pembangunan sistem pemantauan haus mata alat menggunakan pelbagai jenis sensor dalam proses lirik.  -

mohd. zaki nuawi, mohd shukry abdul majid, nawal aswan abdul jalil, sallehuddin ohamed haris, shahrum abdullah, mohammad rasidi mohammad rasani.  (2019).  enhancing the material properties characteristics study by monitoring the mechanical structure based on non-conventional modal analysis.  - 1-5. 

abdul hadi azman, wan aizon w ghopa, hawa hishamuddin, salvinder singh karam singh, muhamad razuhanafi mat yazid, dzuraidah abd. wahab, shahrum abdullah, ahmad kamal ariffin mohd ihsan.  (2019).  community awareness & education on express bus safety based on ir 4.0 technologies.  - 1. 

abdul hadi azman, salvinder singh karam singh, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, shahrum abdullah, dzuraidah abd. wahab, ahmad kamal ariffin mohd ihsan.  (2019).  driver behaviour characterisation for express bus safety enhancement using smart safety index mapping system.  - the international innovation, invention & designcompetition reinventing the fundamentals proceeding.  80. 

reza manouchehry nya, shahrum abdullah, salvinder singh karam singh.  (2019).  reliability-based fatigue life of vehicle spring under random loading.  - international journal of structural integrity.  737-748. 

lennie abdullah, salvinder singh karam singh, abdul hadi azman, shahrum abdullah, ahmad kamal ariffin mohd ihsan and yat sheng kong.  (2019).  fatigue life-based reliability assessment of a heavy vehicle leaf spring.  - international journal of structural integrity.  726-736. 

airee afiq abd rahim, shahrum abdullah, salvinder singh karam singh and mohd. zaki nuawi.  (2019).  reliability assessment on automobile suspension system using wavelet analysis.  - international journal of structural integrity.  602-611. 

asliah seharing, abdul hadi azman, shahrum abdullah.  (2019).  analysis of gradient lattice structure patterns for bone implant design.  - proceedings of numerical analysis in engineering 2019.  68-69. 

abdul hadi azman, muhamad razuhanafi mat yazid, wan aizon w ghopa, hawa hishamuddin, salvinder singh karam singh, shahrum abdullah, dzuraidah abd. wahab.  (2019).  human behaviour characterisation towards safety index development for express bus safety.  - 1. 

salvinder singh karam singh, abdul hadi azman, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, shahrum abdullah, dzuraidah abd. wahab, ahmad kamal ariffin mohd ihsan, mohd syazwan solah, azhar hamzah.  (2019).  smart safety index mapping system for express bus.  - 1. 

a arifin, s n sahadan, s abdullah.  (2019).  evaluating the contraction value of ferromagnetic material at early fatigue loading stage using magnetic flux leakage signature.  - iop conference series: materials science and engineering / international conference on mechanical engineering, energy and advanced materials,.  1-12. 

y. s. kong, s. abdullah, d. schramm, m. z. omar, s. m. haris.  (2019).  design of artificial neural network using particle swarm optimisation for automotive spring durability.  - journal of mechanical science and technology.  1-9. 

y.s.kong, s.abdullah, d.schramm, m.z.omar, s.m.haris.  (2019).  correlation of uniaxial and multiaxial fatigue models for automobile spring life assessment.  - experimental techniques.  1-19. 

mat tahir, m.f., abdullah, m.f., mohamed haris, s., nuawi, m.z., abdullah, s..  (2019).  characterisation of mechanical behaviour of polymer using i-kaz 4d analysis method via ball impact testing..  - proceedings of recent advances in automotive engineering.  118-119. 

m.i.m. ahmad, a. arifin, s. abdullah, w.z.w. jusoh, s.s.k. singh.  (2019).  the probabilistic analysis of fatigue crack effect based on magnetic flux leakage.  - international journal of reliability and safety.  18-30. 

shahrum abdullah, ahmad kamal ariffin, salvinder singh karam singh, noorhelyna razali, muhamad alias md. jedi, meor iqram meor ahmad.  (2019).  proceedings of numerical analysis in engineering 2019.  - proceedings of numerical analysis in engineering 2019.  1-127. 

aini hazwani shahrir, muhammad razuhanafi mat yazid, shahrum abdullah, nur izzi md. yusoff, salvinder singh a/l karam singh.  (2019).  assessing the safety behaviour of express bus driving condition from passengers perspective.  - pertandingan rekacipta inovasi nasional - kejuruteraan dan alam bina (prin-kab) 2019.  1. 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2019).  the analysis of fatigue lifetime using markov chain model based on randomization paris law equation.  - international journal of innovative technology and exploring engineering.  282-286. 

aini hazwani shaharir, muhamad razuhanafi mat yazid, shahrum abdullah, nur izzi md.yusoff.  (2019).  assessing the safety behaviour of express bus drivers from passengers perspective.  - 1. 

c. h. chin, s. abdullah, s. s. k. singh, d. schramma. k. ariffin, and n. n. m. nasir.  (2019).  compression of strain load history using holder exponents of continuous wavelet transform.  - proceedings of the 7th international conference on fracture fatigue and wear. 

asliah seharing, abdul hadi azman, shahrum abdullah.  (2019).  comparative analysis between the mechanical behaviour of gradient and uniform lattice structures using finite element analysis.  - journal of engineering science and technology.  1-15. 

y.s. kong, s. abdullah, d. schramm, m.z. omar, s.m. haris.  (2019).  evaluation of energy-based model generated strain signals for carbon steel spring fatigue life assessment.  - metals. 

y.s. kong, s. abdullah, d. schramm, m.z. omar, s.m. haris.  (2019).  development of multiple linear regression-based models for fatigue life evaluation of automotive coil springs.  - mechanical systems and signal processing.  675-695. 

n.i.i. mansor, s. abdullah, a.k. ariffin.  (2019).  effect of loading sequences on fatigue crack growth and crack closure in api x65 steel.  - marine structures. 

asliah seharing, abdul hadi azman, shahrum abdullah.  (2019).  gradient lattice structure bio mimicry design configurations for additive manufacturing.  - international journal of engineering and technology (uae).  36-43. 

yat sheng kong, shahrum abdullah, dieter schramm, mohd zaidi omar, sallehuddin mohd. haris.  (2019).  optimization of spring fatigue life prediction model for vehicle ride using hybrid multi-layer perceptron artificial neural networks.  - mechanical systems and signal processing.  597-621. 

salvinder singh and shahrum abdullah.  (2019).  durability analysis using markov chain modeling under random loading for automobile crankshaft.  - international journal of structural integrity.  454-468. 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2019).  the analysis of fatigue lifetime using markov chain model based on randomization paris law equation.  - international journal of innovative technology and exploring engineering.  282-286. 

azli bin arifin;nordin bin jamaludin;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;mohd. zaki bin nuawi.  (2018).  quantitative study of self-magnetic flux leakage towards the failure analysis for ferromagnetic components.  -

mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;zainuddin bin sajuri;wan aizon bin w ghopa.  (2018).  thixoforming of novel aluminium alloys.  -

s.s.k. singh, s. abdullah.  (2018).  effects of mean stress on the durability assessment for an automobile crankshaft using markov chain modelling technique.  - journal of mechanical engineering. 

mohd irman ramli, mohd. zaki nuawi, shahrum abdullah, mohammad rasidi mohammad rasani, hambali boejang, mohd farriz basar, kho ko seng.  (2018).  comparison study on light structure modal parameter using experimental modal analysis method via piezofilm sensor.  - jurnal teknologi. 

c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin.  (2018).  establishing energy-damage relationship for fatigue data editing of strain loading history.  - international review of mechanical engineering (i.re.m.e.). 

m. f. mod yunoh, s. abdullah, m. h. m. saad, z. m. nopiah, m. z. nuawi, s. s. k. singh.  (2018).  probabilistic-based analysis for damaging features of fatigue strain loadings.  - frattura ed integrita strutturale. 

siti sarahjanuri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, and shahrum abdullah.  (2018).  initial probability distribution in markov chain model for fatigue crack growth problem.  - international journal of engineering & technology. 

majid jafarzadehghoushji, r. alebrahim, rozli zulkifli, abu bakar sulong, shahrum abdullah, che husna azhari.  (2018).  crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application.  - iranian polymer journal. 

roslinda idris, shahrum abdullah, prakash thamburaja, mohd zaidi omar.  (2018).  the need to generate entropy characteristics for fatigue life prediction in low-carbon steel.  - journal of the brazilian society of mechanical sciences and engineering. 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri, wan fathul hakim wan zamri and mohd faizal abdullah.  (2018).  brazed joint interface bonding strength of ar500 steel and aa7075 aluminium alloy.  - metals. 

a.y.n. yusmye, a.k. ariffin, s. abdullah & s.s.k. singh, m. beer.  (2018).  application of fuzzy finite element method in addressing the presence of uncertainties.  - proceedings of the 28th international european safety and reliability conference (esrel 2018). 

y. s. kong, s. abdullah, d. schramm, m. z. omar, s. m. haris, t. bruckmann and f. kracht.  (2018).  characterizing spring durability for automotive ride using artificial neural network analysis.  - international journal of engineering & technology. 

chin chuin hao, shahrum abdullah, ahmad kamal ariffin and salvinder singh karam singh.  (2018).  durability analysis for coil spring suspension based on strain signal characterization.  - international journal of engineering & technology. 

m. mahmud, s. abdullah, s. s. k. singh, a. k. ariffin, z. m. nopiah and a. arifin.  (2018).  distribution characterisation of coil spring strain histories using mixed weibull analysis.  - international journal of engineering & technology. 

yat sheng kong, shahrum abdullah, dieter schramm, mohd zaidi omar, sallehuddin mohd. haris.  (2018).  vibration fatigue analysis of carbon steel coil spring under various road excitations.  - metals. 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, wan fathul hakim zamri, mohd zaidi omar and zainuddin sajuri.  (2018).  experimental and numerical investigation on the layering configuration effect to the laminated aluminium/steel panel subjected to high speed impact test.  - metals. 

a. arifin, s. abdullah, m. iqram, n. jamaluddin.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 15. 

c.h. azhari, m.z. omar, s. abdullah.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 4. 

che husna azhari, mohd zaidi omar, shahrum abdullah.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 146. 

mohd najib muhamed, mohd zaidi omar, shahrum abdullah, zainuddin sajuri and wan fathul hakim wan zamri.  (2018).  investigation of low-velocity impact and flexural loading on ar500 steel/aa7075 aluminum alloy brazed joint.  - songklanakarin journal of science and technology. 

a.h. azman, s.s.k. singh , w.g.w. aizon, h. hishamuddin, m.r.m. yazid, s. abdullah, a.k. ariffin, d. a. wahab, r. atiq, m.s. solah, a. hamzah.  (2018).  the needs to establish an integrated safety system for express bus.  - international journal of engineering & technology.  1537-1540. 

r. manouchehry nya, shahrum abdullah, salvinder, s.k. singh, prakash thamburaja.  (2018).  fatigue life prediction for automobile coil spring using modal analysis.  - international journal of engineering & technology. 

r. manouchehry nya, s. abdullah & s.s.k. singh.  (2018).  durability test for automobile suspension from equivalent damage modelling under constant amplitude load.  - proceedings of mechanical engineering research day 2018. 

m. mahmud, s. s. k. singh, s. abdullah, a. k. ariffin, z. m. nopiah.  (2018).  determining damaging fatigue cycles under influence of random loadings using the root-mean-square level.  - journal of mechanical engineering. 

n.m.a. arifin, s. abdullah, s.s.k. singh & a.h. azman.  (2018).  characterising durability for solid and honeycomb plate under constant loading using finite element analysis.  - proceedings of mechanical engineering research day 2018. 

r. manouchehry nya, s. abdullah & s.s.k. singh.  (2018).  durability test for automotive suspension from equavalent damage modelling under constant amplitude load.  - proceedings of mechanical engineering research day 2018. 

a.a.a. rahim, s. abdullah, s.s.k. singh & m.z. nuawi.  (2018).  discrete wavelet transform method for fatigue analysis on car suspension system.  - proceedings of mechanical engineering research day 2018. 

n.n.m. nasir, s. abdullah, s.s.k. singh & s.m. haris.  (2018).  extreme condition strain signal reliability assessment using empirical mode decomposition.  - proceedings of mechanical engineering research day 2018. 

n. m. m. rasidi, s.abdullah, d.a.wahab, r.ramli, r.m.yassin.  (2018).  assessing technique applicability towards ideation taxonomy for engineering design concept.  - journal of mechanical engineering. 

m. mohammad, s. abdullah, n. jamaludin & o. innayatullah.  (2018).  fatigue life assessment of sae 1045 carbon steel under strain events using the weibull distribution.  - journal of mechanical engineering. 

m. mahmud, s. s. k. singh, s. abdullah , a. k. ariffin, z. m. nopiah.  (2018).  determining daming fatigue cycles under influence of random loadings using the root-mean-square level.  - journal of mechanical engineering. 

s. r. ahmad, a. arifin, s. abdullah, m. f. m. yunoh.  (2018).  characterisation of stress intensity factor with magnetic flux signal leakage in stable fatigue crack growth region.  - journal of mechanical engineering. 

m.f. abdullah, s. abdullah, m.z. omar, z. sajuri & m.s. risby.  (2018).  observing the behaviour of reinforced magnesium alloy with carbon-nanotube and lead under 976 m/s projectile impact.  - journal of mechanical engineering. 

m. f. m. yunoh, s. abdullah, m. h. m. saad, z. m. nopiah, m. z. nuawi, a. ariffin.  (2018).  classification of fatigue damaging segments using artificial neural network.  - journal of mechanical engineering. 

salvinder singh & shahrum abdullah.  (2018).  pendekatan keboleharapan penilaian hayat lesu.  - 93. 

mohd irman ramli, mohd. zaki nuawi, mohammad rasidi mohammad rasani, shahrum abdullah, muhamad arif fadli ahmad, muhammad fazrin abdullah.  (2018).  development of polymer mechanical properties characteristics using i-kaz 4d analysis method.  - jurnal teknologi. 

a. a. rahim, c. h. chin, s. abdullah, s. s. k. singh, m. z. nuawi and f. h. a. hassan.  (2018).  characterization of wavelet decomposition strain signal using the k-mean clustering method.  - international journal of engineering & technology. 

m. mahmud, s. abdullah, a. k. ariffin & m. z. nopiah.  (2018).  on the need to adopt strain-based probabilistic approach in predicting fatigue life.  - journal of the brazilian society of mechanical sciences and engineering.  1-13. 

siti sarah januri, zulkifli mohd nopiah, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2018).  the analysis of initial probability distribution in markov chain model for lifetime estimation.  - international journal of integrated engineering. 

nor azazi ngatiman, mohd zaki nuawi, shahrum abdullah.  (2018).  z-freq: signal analysis-based gasoline engine monitoring technique using piezo-film sensor.  - international journal of mechanical engineering and technology. 

l. abdullah, s.s.k. singh, s. abdullah, a. h. azman, a.k. arifin, y. s. kong.  (2018).  fatigue life prediction of heavy vehicle leaf spring using statistical approach.  - proceedings of 134th iserd international conference, brussels, belgium. 

muhamad arif fadli ahmad, mohd. zaki nuawi, jaharah a. ghani, shahrum abdullah and mohd irman ramli.  (2018).  an investigation on tool wear monitoring using mfc and pvdf sensors via i-kaztm statistical signal analysis.  - proceedings of mechanical engineering research day 2018. 

m. a. f. ahmad, m. z. nuawi, j. a. ghani, s. abdullah dan a. n. kasim.  (2018).  tool wear monitoring using macro fibre composite as a vibration sensor via i-kaztm statistical signal analysis.  - arpn journal of engineering and applied sciences. 

a. a. a. rahim, s. abdullah, s. s. k. singh, and m. z. nuawi.  (2018).  relationship between time domain and frequency domain strain signal application to real data.  - journal of mechanical engineering. 

najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, mohd zaidi omar, zainuddin sajuri, wan fathul hakim zamri.  (2018).  ballistic limit of laminated panels with different joining materials subjected to steel-hardened core projectile.  - international journal of integrated engineering. 

r. idris, s. abdullah, p. thamburaja, m. z. omar.  (2018).  entropy-based approach for fatigue crack growth rate of dual-phase steel.  - international journal of integrated engineering. 

nadia nurnajihah mohamad nasir, shahrum abdullah, salvinder singh karam singh, sallehudin mohd haris.  (2018).  evaluation of reliability-based fatigue strain data analysis for an automobile suspension under various road condition.  - international journal of integrated engineering. 

a. a. a. rahim, s. s. k. singh, s. abdullah, m. z. nuawi.  (2018).  strain signal characterisation using the 4th order of daubechies wavelet transform for fatigue life determination.  - international journal of integrated engineering. 

nadia nurnajihah mohamad nasir, shahrum abdullah, salvinder singh karam singh, mohd faridz yunoh, mohd zaki nuawi, sallehudin mohd haris.  (2018).  time-frequency strain data analysis of suspension using the hilbert-huang transform.  - journal of mechanical engineering. 

t.e. putra, s. abdullah, d. schramm, m.z. nuawi, t. bruckmann.  (2017).  the need to generate realistic strain signals at an automotive coil spring for durability simulation leading to fatigue life assessment.  - mechanical systems and signal processing.  432-447. 

y.s. kong, s. abdullah, d. schramm , m.z. omar, s.m. haris, t. bruckmann.  (2017).  mission profiling of road data measurement for coil spring fatigue life.  - measurement.  99-110. 

nor mahani md rasidi, shahrum abdullah, dzuraidah abd wahab, rizzauddin ramli dan ruhizan mohammad yasin.  (2017).  pemilihan teknik penjanaan idea konsep bagi kursus reka bentuk kejuruteraan.  - prosiding k-novasi pengajaran dan pembelajaran ukm (pendidikan kejuruteraan dan alam bina) 2017.  251-278. 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, kamal halili hassan, rozanah ab rahman, mohd radzi abu mansor, wan aizon w ghopa, wan fathul hakim w zamri & azhari shamsudeen.  (2017).  laporan interim 2: kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  -

m.f.m. yunoh, s. abdullah, m.h.m. saad, z.m. nopiah, m.z. nuawi & s.s.k. singh.  (2017).  determining probabilistic-based failure of damaging features for fatigue strain loadings.  - 7th international conference on durability and fatigue (fatigue 2017). 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, azhari shamsudeen, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w. zamri, kamal halili hassan & rozanah ab rahman.  (2017).  profil kemalangan kren menara.  -

n. n. m. nasir, s. abdullah, s. s. k. singh, m.f. yunoh, m. z. nuawi, s. m. haris.  (2017).  time-frequency strain data analysis of suspension using the hilbert-huang transform.  - international conference on recent advances in automotive engineering & mobility research recar 2017. 

r. manouchehry nya, s. abdullah, s.s.k. singh & a. arifin.  (2017).  fatigue life prediction for automobile coil spring using modal analysis.  - international conference on recent advances in automotive engineering & mobility research. 

chin chuin hao, shahrum abdullah, ahmad kamal ariffin & salvinder singh karam singh.  (2017).  durability analysis for coil spring suspension based on strain signal characterisation.  - international conference on recent advances in automotive engineering & mobility research recar 2017. 

s.s.k. singh & s. abdullah.  (2017).  effects of mean stress on the durability assessment for an automobile crankshaft using markov chain modelling technique.  - international conference on recent advances in automotive engineering & mobility research, recar 2017. 

airee afiq abd rahim, shahrum abdullah, salvinder singh karam singh, mohd zaki nuawi.  (2017).  relationship between time domain and frequency domain strain signal-application to real data.  - 5th international conference on advances in mechanical engineering. 

mashitah mahmud, salvinder singh karam singh, shahrum abdullah, ahmad kamal ariffin mohd ihsan, zulkifli mohd nopiah.  (2017).  determining damaging fatigue cycles under influence of random loadings using the root-mean-square level.  - 5th international conference on advances in mechanical engineering. 

siti sarah januri, zulkifli mohd nopiah, mohd akramin mohd romlay, ahmad kamal ariffin mohd ihsan, nurulkamal masseran, shahrum abdullah.  (2017).  statistical distribution for initial crack and number of loading in fatigue crack growth process.  - international journal of advanced and applied sciences. 

majid j ghoushji, rahim a eshkoor, rozli zulkifli, abu b sulong, shahrum abdullah and che h azhari.  (2017).  energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes.  - journal of reinforced plastics and composites. 

m. n. muhamed, m. z. omar, s. abdullah , z. sajuri, w. f. h. w. zamri.  (2017).  the effect of surface texture on the joint shear strength of ar500 steel and aa7075.  - journal of mechanical engineering. 

sallehuddin mohamed haris dan shahrum abdullah.  (2017).  editorial.  - international journal of advanced mechatronic systems.  125-126. 

m. f. m. yunoh, s. abdullah, m. h. m. saad, z. m. nopiah, m. z. nuawi.  (2017).  probability analysis in determining the behaviour of variable amplitude strain signal based on extraction segments.  - latin american journal of solids and structures.  2141-2152. 

m. f. m. yunoh, s. abdullah, m. h. m. saad, z. m. nopiah, m. z. nuawi.  (2017).  k-means clustering analysis and artificial neural network classification of fatigue strain signals.  - journal of the brazilian society of mechanical sciences and engineering.  757-764. 

m. f. m. yunoh, s. abdullah, m. h. m. saad, z. m. nopiah, m. z. nuawi.  (2017).  evaluation of fatigue damage classification based on probabilistic weibull analysis.  - iranian journal of science and technology, transactions of mechanical engineering.  189-195. 

m. i. ramli, m. z. nuawi, s. abdullah, m. r. m. rasani, m. f. basar, m. a. f. ahmad and k. k. seng.  (2017).  novel technique of modal analysis on small structure using piezoelectric film sensor and accelerometer.  - arpn journal of engineering and applied sciences.  4902-4912. 

mohd irman ramli, mohd. zaki nuawi, shahrum abdullah, mohammad rasidi mohammad rasani, muhamad arif fadli ahmad, kho ko seng.  (2017).  an investigation on light structure modal parameter by using experimental modal analysis method via piezofilm sensor.  - jurnal teknologi.  159-165. 

n.a. rahman, m.f. abdullah, s. abdullah, w.f.h. zamri, m.z. omar, z. sajuri.  (2017).  characterising ballistic limits of lightweight laminated-structure as a protective panel for armoured vehicle.  - journal of mechanical engineering.  20-34. 

y.s. kong, s. abdullah, m.z. omar, s.m. haris.  (2017).  the need to generate a force time history towards life assessment of a coil spring.  - journal of mechanical engineering.  11-26. 

w. n. m. jamil, z. sajuri, s. abdullah, m. a. aripin, m. z. omar, m.f. abdullah, w. f. h. zamri.  (2017).  effect of steel fibres and wire mesh reinforcement on flexural strength and strain energy steel-epoxy-aluminium composite laminates.  - journal of mechanical engineering.  10-20. 

shahrum abdullah, salvinder singh karam singh, ahmad kamal ariffin, najihah abdul rahman & mazian mohammad.  (2017).  proceedings of symposium on damage mechanisms in materials and structures 2017 (sdmms 2017).  - proceedings of symposium on damage mechanisms in materials and structures 2017.  1-60. 

r idris, s abdullah, p thamburaja and mz omar.  (2017).  evaluation of fatigue crack growth rate for iron-carbon metals based on degradation-entropy generation theorem.  - journal of fundamental and applied sciences.  526-541. 

mohd irman ramli, mohd. zaki nuawi, shahrum abdullah, mohammad rasidi mohammad rasani, kho ko seng, muhamad arif fadli ahmad.  (2017).  novel technique of modal analysis for light structure via piezofilm sensor: a comparison study.  - jurnal teknologi.  15-20. 

m.i. ramli, m.z. nuawi, m.r.m. rasani, s. abdullah, k. k. seng.  (2017).  modal analysis study on aluminum 6061 using accelerometer and piezoelectric film sensor.  - international journal of applied engineering research. 

ghoushji, m.j., eshkoor, r.a., zulkifli, r., sulong, a.b., abdullah, s., azhari, c.h..  (2017).  energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes.  - journal of reinforced plastics and composites.  1028-1037. 

s.s.k.singh, s.abdullah and n.a.n.mohamed.  (2017).  markov chain application in fatigue reliability analysis for durability assessment of a vehicle crankshaft.  - arpn journal of engineering and applied sciences.  1991-1996. 

m. r. m. akramin, a. k. ariffin, masanori kikuchi & s. abdullah.  (2017).  sampling method in probabilistic s-version finite element analysis for initial flaw size.  - journal of the brazilian society of mechanical sciences and engineering.  357-365. 

s.s.k. singh, s. abdullah & n. nikabdullah.  (2017).  the needs of understanding stochastic fatigue failure for the automobile crankshaft: a review.  - engineering failure analysis.  464-471. 

s.s.k.singh, s. abdullah, m.f.m. yunoh & n.m.n. abdullah.  (2017).  the needs to integrate durability assessment using stochastic process for an automobile crankshaft.  - 7th international conference on durability and fatigue (fatigue 2017). 

t.e. putra, s. abdullah, d. schramm, m.z. nuawi, t. bruckmann.  (2017).  reducing cyclic testing time for components of automotive suspension system utilising the wavelet transform and the fuzzy c-means.  - mechanical systems and signal processing.  1-14. 

kong y.s., abdullah s., omar m.z., haris s.m..  (2016).  topological and topographical optimization of automotive spring lower seat.  - latin american journal of solids and structures.  1388-1405. 

ahmad m.i.m., arifin a., abdullah s..  (2016).  evaluating effect of magnetic flux leakage signals on fatigue crack growth of mild steel.  - journal of mechanical engineering and sciences.  1827-1834. 

salvinder s., shahrum a., mohamed n.a.n..  (2016).  discretized markov chain in damage assessment using rainflow cycle with effects of mean stress on an automobile crankshaft.  - journal of mechanical science and technology.  3539-3551. 

rahman n.a., abdullah s., zamri w.f.h., abdullah m.f., omar m.z., sajuri z..  (2016).  ballistic limit of high-strength steel and al7075-t6 multi-layered plates under 7.62-mm armour piercing projectile impact.  - latin american journal of solids and structures.  1658-1676. 

abdullah m.f., abdullah s., omar m.z., sajuri z., sohaimi r.m..  (2016).  fatigue life of the magnesium alloy az31b under specific spectrum loading.  - materialpruefung/materials testing.  200-205. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2016).  finite element analysis and crashworthiness optimization of foam-filled double circular under oblique loading.  - latin american journal of solids and structures.  2176-2189. 

ismail r., harun f., jalar a., abdullah s..  (2016).  ultrasonic vibration in leadframe for the bondability for au wedge bond.  - materials science forum.  83-86. 

ramli m.i., nuawi m.z., abdullah s., rasani m.r.m., seng k.k., ahmad m.a.f..  (2016).  development on simulation of small structure modal analysis method using piezoelectric film sensor.  - icsv 2016 - 23rd international congress on sound and vibration: from ancient to modern acoustics. 

ismail r., harun f., jalar a., abdullah s..  (2016).  mechanical interlocking on leadframe surface for bondability of au wedge bond.  - materials science forum.  79-82. 

muhammad nubli zulkifli, azman jalar, shahrum abdullah & nurinsan kamil othman.  (2016).  bondability and strength evaluation of gold ball bond using nanoindentation approach.  - key engineering materials.  132-141. 

zulkifli mohd nopiah, siti sarah januri, ahmad kamal ariffin, nurulkamal masseran, shahrum abdullah.  (2016).  transition probabilities matrix of markov chain in the fatigue crack growth model.  - the 4th international conference on quantitative sciences and its applications (icoqsia 2016).  1-6. 

w.n.m. jamil, m.a. aripin, z. sajuri, s. abdullah, m.z. omar, m.f. abdullah and w.f.h. zamri.  (2016).  mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles.  - international journal of automotive and mechanical engineering.  3742-3753. 

othman a., abdullah s., ariffin a.k., mohamed n.a.n..  (2016).  investigating the crushing behavior of quasi-static oblique loading on polymeric foam filled pultruded composite square tubes.  - composites part b: engineering.  493-514. 

senin a., nopiah z.m., ihsan a.k.a.m., abdullah s., wahab d.a., jamaludin m.j., zakaria a..  (2016).  johnson cook constitutive modeling for austenite metal in hot forming process.  - jurnal teknologi.  71-75. 

s. s. k. singh, s. abdullah & n. a. n. mohamad.  (2016).  reliability assessment for an automobile crankshaft under random loading.  - jurnal teknologi.  91-96. 

y. s. kong, s. abdullah, m. z. omar & s. m. haris.  (2016).  side force analysis of suspension strut under various load cases.  - jurnal teknologi.  85-90. 

s.r. ahmad, a. arifin , s. abdullah & s.a.n. mohamed.  (2016).  magnetic flux gradient observation during fatigue crack propagation: a case study of sae 1045 carbon steel used for automotive transmission parts.  - the 2nd international conference on automotive innovation and green vehicle (aigev 2016). 

k. a. zakaria, s. abdullah & m. j. ghazali.  (2016).  a review of the loading sequence effects on the fatigue life behaviour of metallic materials.  - journal of engineering science and technology review.  189-200. 

y. s. kong, s. abdullah, m. z. omar & s. m. haris.  (2016).  failure assessment of a leaf spring eye design under various load cases.  - engineering failure analysis.  146-159. 

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, kamal halili hassan, rozanah ab rahman, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w. zamri & azhari shamsudeen.  (2016).  laporan awal: kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  -

shahrum abdullah, mohd zaidi omar, zainuddin sajuri, baba md deros, kamal halili hassan, rozanah ab rahman, mohd radzi abu mansor, wan aizon wan ghopa, wan fathul hakim w zamri & azhari shamsudeen.  (2016).  laporan interim 1: kajian penambahbaikan sistem pengurusan keselamatan kren menara di sektor pembinaan.  -

s.a.n. mohamed, a. arifin, s. abdullah and a.k. ariffin.  (2016).  charactering self magnetic flux leakage associated to biaxial fatigue life estimation using weibull-based method.  - international journal of fracture fatigue and wear.  21-26. 

s.a.n. mohamed, s. abdullah, a. arifin, a.k. ariffin, and m.m. padzi.  (2016).  characterization of the biaxial fatigue behaviour on medium carbon steel using the strain-life approach.  - international journal of automotive and mechanical engineering.  3262-3277. 

badrullzamin mohd yassin, rozli zulkifli, wan ramli wan daud, shahrum abdullah.  (2016).  flexural behaviour of uni-directional kenaf composites using experimental and simulation methods.  - international journal of mechanical & mechatronics engineering.  57-64. 

intan fadhlina mohamed, seungwon lee, kaveh edalati, zenji horita, shahrum abdullah, mohd zaidi omar, wan fathul hakim wan zamri.  (2016).  grain refinement and microstructure evolution in aluminum a2618 alloy by high pressure torsion.  - jurnal teknologi.  149-152. 

wan fathul hakim w zamri, shahrum abdullah, mohd zaidi omar, rozli zulkifli, mohammad rasidi mohammad rasani, zambri harun, wan aizon wan ghopa, and intan fadhlina mohamed.  (2016).  pemantapan analisis komputeran dan penghasilan video pendek dalam projek reka bentuk ke arah penyediaan jurutera kompetan.  - prosiding k-novasi pengajaran & pembelajaran ukm.  55-61. 

mohd azwan husin, rozli zulkifli, shahrum abdullah, wan ramli wan daud.  (2016).  kelakuan delaminasi komposit laminat hibrid anyaman gentian mengkuang/ gentian alat sutera/ epoksi.  - jurnal teknologi.  67-74. 

mohd radzi abu mansor, norhidayah mat taib, zambri harun, hawa hishamuddin, zulkhairi zainol abidin, rozli zulkifli, shahrum abdullah, azhari shamsudeen.  (2016).  the implementation of cdio concept in shell eco-marathon competition in nurturing future engineers.  - prosiding peka2015 k-novasi pengajaran dan pembelajaran (pendidikan kejuruteraan dan alam bina).  161-168. 

mohd azwan husin, rozli zulkifli, shahrum abdullah and wan ramli wan daud.  (2016).  mode ii delamination of woven mengkuang fiber/woven silk laminated hybrid composites.  - materials testing.  374-380. 

n. m. m. rasidi, s. abdullah, d. a. wahab, r. ramli, m. r. a. mansor and r. m. yasin.  (2016).  generation of idea for product innovation in design course.  - man in india.  411-418. 

roslina ismail, fuaida harun, muhammad nubli zulkifli, azman jalar, maria abu bakar, and shahrum abdullah.  (2015).  bondability of second copper wire bonds on silver and nickel palladium gold silver metallization.  - ieee transactions on components, packaging and manufacturing technology.  1541-1545. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2015).  optimization of foam-filled double circular tubes under axial and oblique impact loading conditions.  - thin-walled structures.  1-11. 

ahmad m.a.f., nuawi m.z., abdullah s., wahid z., karim z., dirhamsyah m..  (2015).  development of tool wear machining monitoring using novel statistical analysis method, i-kaz™.  - procedia engineering.  355-362. 

putra t.e., abdullah s., schramm d., nuawi m.z., bruckmann t..  (2015).  generating strain signals under consideration of road surface profiles.  - mechanical systems and signal processing.  485-497. 

karam singh s.s, abdullah s., nik mohamed n.a.  (2015).  reliability analysis and prediction for time to failure distribution of an automobile crankshaft.  - eksploatacja i niezawodnosc.  408-415. 

ghazali f.a., manurung y.h.p., mohamed m.a., alias s.k., abdullah s..  (2015).  effect of process parameters on the mechanical properties and failure behavior of spot welded low carbon steel.  - journal of mechanical engineering and sciences.  1489-1497. 

djamaluddin f., abdullah s., ariffin a.k., nopiah z.m..  (2015).  non-linear finite element analysis of bitubal circular tubes for progressive and bending collapses.  - international journal of mechanical sciences.  228-236. 

abdullah m.f., abdullah s., omar m.z., sajuri z., risby m.s..  (2015).  analysis of variable strain amplitude response caused by impact loading of carbon nanotube reinforced magnesium alloy az31b.  - procedia engineering.  10-17. 

shahrum bin abdullah, nordin bin jamaludin, mohd. zaki bin nuawi, zulkifli bin mohd nopiah, azli bin arifin.  (2015).  investigation study to predict fatigue failur using acoustic emission characteristics for metallic components.  -

m.a.f. ahmad, m.z. nuawi, s. abdullah, z. wahid, z. karim, m. dirhamsyah.  (2015).  development of tool wear machining monitoring using novel statistical analysis method, i-kaztm.  - 3rd international conference on material and component performance under variable amplitude loading,. 

s. s. k. singh, s. abdullah & n. a. n. mohamed.  (2015).  reliability evaluation for an automobile crankshaft under random loading.  - 3rd international conference on recent advances in automotive engineering & mobility research. 

y. s. kong, s. abdullah, m. z. omar & s. m. haris.  (2015).  side force analysis of suspension strut under various load cases.  - 3rd international conference on recent advances in automotive engineering and mobility research (recar 2015). 

m.i.m ahmad, a. arifin and s. abdullah.  (2015).  evaluation of magnetic flux leakage signals on fatigue crack growth of mild steel.  - journal of mechanical engineering and sciences.  1727 - 1733. 

mohd azwan husin, rozli zulkifli, shahrum abdullah, wan ramli wan daud.  (2015).  effect of naoh concentration on mode ii critical strain energy release, giic for woven mengkuang fibre reinforced epoxy laminated composites.  - international journal of mechanical & mechatronics engineering.  26-31. 

wan fathul hakim w. zamri, dzuraidah abd wahab, rizauddin ramli & shahrum abdullah.  (2015).  penglibatan pelajar jabatan kejuruteraan mekanik dan bahan (jkmb) dalam program perkhemahan reka bentuk pelbagai disiplin.  - karnival inovasi pengajaran dan pembelajaran (k-novasi) ukm - pingat perak. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

a. arifin, w.z.w. jusoh, s. abdullah, n. jamaluddin and a.k. ariffin.  (2015).  investigating the fatigue failure characteristics of a283 grade c steel using magnetic flux detection..  - steel and composite structures.  601-614. 

azli ariffin, meor iqram meor ahmad,shahrum abdullah, wan zulhelmi wan jusoh.  (2015).  detection of cracked position due to cyclic loading for ferromagnetic materials based on magnetic memory method.  - jurnal teknologi.  67. 

f. djamaluddin, s. abdullah, a.k. arrifin and z.m. nopiah.  (2015).  modeling and optimization of aluminum foam cylindrical double tubes under axial impact.  - journal of mechanical engineering and sciences.  1383-1392. 

safat b. wali, mahammad a. hannan and shahrum abdullah, aini hussain, salina a. samad1.  (2015).  shape matching and color segmentation based traffic sign detection system.  - przeglad electrotechniczny (electrical review).  36-40. 

m.f.m. yunoh, s. abdullah, m.h.m. saad, z.m. nopiah, m.z. nuawi.  (2015).  fatigue feature extraction analysis based on a k-means clustering approach.  - journal of mechanical engineering and sciences.  1275-1282. 

mohamad faizal abdullah, shahrum abdullah, mohd zaidi omar, zainuddin sajuri and risby mohd sohaimi.  (2015).  failure observation of the az31bmagnesium alloy and the effect of leadaddition content under ballistic impact.  - advances in mechanical engineering.  1-13. 

m.i.m. ahmad, a. arifin, s. abdullah, w.z.w. jusoh and s.s.k. singh.  (2015).  fatigue crack effect on magnetic flux leakage for a283 grade c steel.  - steel and composite structure, an international journal.  1549-1560. 

jafri kassim, rizauddin ramli and shahrum abdullah.  (2015).  review on geometrical tolerance applications and contribution in automotive industry.  - 3rd international conference on recent advances in automotive engineering & mobility research (recar 2015). 

karim z., nuawi m.z., ghani j.a., ghazali m.j., abdullah s., mansor n.i.i..  (2015).  sliding wear evaluation of aluminum alloy (7075-t6) on hardened steel (aisi4340) via non-contact technique by i-kaz™ multi-level analysis.  - wear.  99-104. 

al emran ismail, ahmad kamal ariffin, s. abdullah, m.j ghazali and a.l mohd tobi.  (2015).  j-integral prediction for semi-elliptical surface cracks in round bars subjected to torsion moment.  - applied mechanics and materials.  295-299. 

nadia mohd effendy, shahrum abdullah, mohd faridz mod yunoh, ahmad nazrun shuid.  (2015).  time and dose-dependent effects of labisia pumila on the bone strength of postmenopausal osteoporosis rat model.  - bmc complementary and alternative medicine.  1-11. 

reza alebrahim, sallehuddin mohammed haris, nik abdullah nik mohamed, shahrum abdullah.  (2015).  vibration analysis of self-healing hybrid composite beam under moving mass.  - composite structures.  463-476. 

fuaida harun, roslina ismail, azman jalar, shahrum abdullah.  (2015).  effect of wire diameter and hook location on second bond failure modes.  - microelectronics international.  32-36. 

wan fathul hakim w. zamri, abu bakar sulong,rizauddin ramli, nor kamaliana khamis, hawa hishamuddin, shahrum abdullah.  (2014).  maklumbalas alumni terhadap keberkesanan program kejuruteraan pembuatan di ukm.  - seminar pendidikan kejuruteraan dan alam bina (peka 2013). 

mohd anas mohd sabri, mohd zaki nuawi, mohd faizal mat tahir, shahrum abdullah, abdul rahim bahari and firdaus mohamad hamzah.  (2014).  monitoring system of fuel injector using piezoelectric sensors, applied mechanics and materials.  - applied mechanics and materials.  223-228. 

wan fathul hakim w. zamri, abu bakar sulong, rizauddinramli, nor kamaliana khamis, hawa hishamuddin, zaliha wahid, shahrum abdullah.  (2014).  pengukuran keberkesanan program kejuruteraan pembuatan di ukm menggunakan model rasch.  - seminar pendidikan kejuruteraan dan alam bina (peka 2013) / pusat penyelidikan kejuruteraan, fkab, ukm.. 

rozli zulkifli, shahrum abdullah, sallehuddin mohamed haris, zulkifli mohd nopiah, zambri harun, mohd radzi abu mansor dan nor kamaliana khamis.  (2014).  automotive engineering and mobility research.  - 714. 

m. mohammad, s. abdullah, n. jamaludin, o. innayatullah.  (2014).  predicting the fatigue life of the sae 1045 steel using an empirical weibull-based model associated to acoustic emission parameters.  - materials and design.  54 (2014): 1039-1048. 

nurul izzah ibrahim, mohd fadhli khamis, mohd faridz mod yunoh, shahrum abdullah, norazlina mohamed, ahmad nazrun shuid.  (2014).  targeted delivery of lovastatin and tocotrienol to fracture site promotes fracture healing in osteoporosis model micro-computed tomography and biomechanical evaluation.  - plos one.  12. 

y.s. kong, m.z. omar, l.b. chua, s. abdullah.  (2014).  fatigue life prediction of parabolic leaf spring under various road conditions.  - engineering failure analysis.  92-103. 

mohd. zaidi bin omar, azman bin jalar @ jalil, sallehuddin bin mohamed haris, mohd. zaki bin nuawi, shahrum bin abdullah.  (2014).  development of suspension system for heavy vehicles.  -

azman bin jalar @ jalil, roslinda binti shamsudin, muhammad azmi bin abdul hamid, abdul razak bin daud, norinsan kamil bin othman, shahrum bin abdullah, irman bin abdul rahman.  (2014).  antara sambungan nano aloi pateri-substrat untuk pempakejan nano.  -

a. m. t. ariffin, s. abdullah, md. rafiquzzaman, r. zulkifli, d. a. wahab & a. k. ariffin.  (2014).  investigation of the behaviour of a chopped strand mat/woven roving/foam-klegecell composite lamination structure during charpy testing.  - materials and design.  59:475-485. 

k. a zakaria, s. abdullah, m. j. ghazali, m. z. nuawi, s.m. beden & z. m. nopiah.  (2014).  fatigue strain signal behaviour and damage assessment of an engine mount bracket.  - journal of scientific & industrial research.  73(2014):112-116. 

arifin a.m.t., abdullah s., rafiquzzaman m., zulkifli r., wahab d.a..  (2014).  failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition.  - fibers and polymers.  1729 - 1738. 

nopiah, z. m., osman, m. h., abdullah, s., baharin, m. n..  (2014).  application of a multi-objective approach and sequential covering algorithm to the fatigue segment classification problem.  - arabian journal for science and engineering.  39(3): 2165-2177. 

azli arifin, meor iqram meor ahmad, wanzulhelmi wan jusoh, shahrum abdullah.  (2014).  detection of cracked position due to cyclic loading for ferromagnetic materials based on magnetic memory method.  - international symposium on metallurgy and welding technology 2014. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  j-integral evaluation of surface cracks in round bar under mode iii loadings.  - research journal of applied sciences, engineering and technology.  1985 - 1993. 

m.f.m. yunoh, s. abdullah, m.h.m. saad, z.m. nopiah and m.z. nuawi.  (2014).  fatigue data extraction analysis using daubechies wavelet transform.  - australian journal of basic & applied sciences.  38-40. 

yunoh m.f.m., abdullah s., nopiah z.m., nuawi m.z..  (2014).  fatigue time history analysis for determining the strain signal behaviour.  - international journal of vehicle systems modelling and testing.  363-371. 

m.m. padzi, s. abdullah, m.z. nuawi.  (2014).  on the need to decompose fatigue strain signals associated to fatigue life assessment of the aisi 1045 carbon steel.  - materials and design.  57 (2014) 405-415. 

zambri harun, muhammad syafiq, mohd rasidi rasani, shahrum abdullah, rozli zulkifli, wan mohd faizal wan mahmood, mariyam jameelah ghazali, che husna azhari, mohd radzi abu mansor, zulkhairi, ashraf.  (2014).  skin friction coefficient and boundary layer trend on ukm aster i-bond.  - applied mechanics and materials.  450-455. 

norbahiah misran, zahira yaacob, siti kartom kamaruddin, wardah fatimah, shahrum abdullah, abu bakar sulong, ahmad ashrif a. bakar, amiruddin ismail, wan mimi diyana, othman jaafar, farizah ansarudin, azhari shamsudeen, mohd huzairi johari.  (2014).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-96. 

m. m. padzi, s. abdullah, m. z. nuawi, s. m. beden, z.m. nopiah.  (2014).  evaluating ultrasound signals of carbon steel fatigue testing using signal analysis approaches.  - journal of central south university.  21(1):232-241. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  ungkapan kamiran-j retak permukaan pada bar silinder padu kenaan beban ragam i.  - jurnal teknologi (sciences and engineering).  7 - 17. 

m. b. ali, s. abdullah, m. z. nuawi, a. k. ariffin, z. m. nopiah.  (2014).  evaluating instrumented charpy impact strain signals using curve fitting equations.  - journal of central south university.  21(2):600-609. 

othman a., abdullah s., ariffin a.k., mohamed n.a.n..  (2014).  investigating the quasi-static axial crushing behavior of polymeric foam-filled composite pultrusion square tubes.  - materials and design.  446 - 459. 

n. i. i. mansor, s. abdullah, a. k. ariffin & j, syarif.  (2014).  a review of the fatigue failure mechanism of metallic materials under a corroded environment.  - engineering failure analysis.  42 (2014) 353-365. 

shahrum abdullah, jaharah ab ghani, norhamidi muhamad, dzuraidah abd wahab, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad, zaliha wahid.  (2014).  kkkp 4415 projek industri : kajian kes penilaian kejuruteraan kompleks dalam program pembuatan.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm. 

y. s. kong, m. z. omar, l. b. chua and s. abdullah.  (2014).  ride quality assessment of bus suspension system through modal frequency response approach.  - advances in mechanical engineering.  1-17. 

shahrum abdullah, jaharah a ghani,wan mohd faizal wan mahmood, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad.  (2014).  cadangan pembangunan rubrik untuk penilaian kejuruteraan kompleks dalam projek ilmiah.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm. 

mohd haniff osman, zulkifli mohd nopiah, shahrum abdullah, izamarlina asshaari.  (2014).  genetic algorithm-based fatigue data editing technique.  - 2nd international conference on recent advances in automotive engineering and mobility research, recar 2013; kuala lumpur; malaysia.  431-436. 

zulkifli, m.n., jalar, a., abdullah, s., rahman, i.a., othman, n.k..  (2013).  effect of applied load in the nanoindentation of gold ball bonds.  - journal of electronic materials.  42(6):1063-1072. 

zulkifli, muhammad nubli; jalar, azman; abdullah, shahrum; rahman, irman abdul; hamid, muhammad azmi abdul.  (2013).  strength distribution of au ball bond using nanoindentation approach.  - materials science and engineering a.  577:189-196. 

m.f.m. yunoh, s. abdullah, z.m. nopiah & m.z. nuawi.  (2013).  a review of localised time-frequency features classification associated to fatigue data analysis.  - international review of mechanical engineering.  960-976. 

r.zulkifli, m.m.mustafa, s.abdullah, w.m.f. w.mahmood, a. ariffin, z. harun, n. jamaluddin, m. j. ghazali, n. saibani, r. ramli, z. z. abidin, f.m. tahir, m. a. m. sobri, a. shamsuddeen, z. m. nopiah.  (2013).  benefits of participating in national and international automotive challenge for ukm engineering students.  - international conference on engineering education (icee) 2013. 

m.z. nuawi, a.r. bahari, s. abdullah, a.k. ariffin, z.m. nopiah.  (2013).  time domain analysis method of the impulse vibro-acoustic signal for fatigue strength characterisation of metallic material.  - procedia engineering - international conference proceedings fatigue design 2013. 

norbahiah misran, zahira yaacob, siti kartom kamaruddin, shahrum abdullah, abu bakar sulong, amiruddin ismail, othman jaafar, wardah fatimah mohd yusoff, ahmad ashrif a. bakar, wan mimi diyana wan zaki, farizah ansarudin, mohd fairus awang, arif mohd sham.  (2013).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-45. 

s. abdullah, c.k.e. nizwan, m. f. m. yunoh, m. z. nuawi and z. m. nopiah.  (2013).  fatigue features extraction of road load time data using the s-transform.  - international journal of automotive technology.  14(5):805-815. 

a. arifin, w.z.w. jusoh, s. abdullah.  (2013).  monitoring ferromagnetic failure characteristics using the surface magnetic flux detection approach.  - 2nd international conference on mechanical, automotive and aerospace engineering (icmaae 2013. 

r. daud, a.k. ariffin and s. abdullah.  (2013).  validation of crack interaction limit model for parallel edge cracks using two-dimensional finite element analysis.  - international journal of automotive and mechanical engineering.  993-1004. 

mohammad, m., abdullah, s., jamaludin, n., innayatullah, o., nopiah, z.m..  (2013).  fatigue failure assessment of metallic specimens using the acoustic emission technique.  - materials testing.  55(4):310-318. 

a.a. lashlem, d.a. wahab, s. abdullah and c.h. che haron.  (2013).  a review on end-of-life vehicle design process and management.  - journal of applied sciences.  13(5):654-662. 

m. h. osman, z. m. nopiah, s. abdullah, a. lennie.  (2013).  self-tuning varri method in preparing fatigue segment.  - jurnal teknologi (sciences and engineering).  63(2):45-50. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

m. mohammad, s. abdullah, n. jamaluddin, o. innayatullah.  (2013).  acoustic emission evaluation of fatigue life prediction for a carbon steel specimen using statistical-based approach.  - materials testing.  55(6):1-9. 

mahfodzah md padzi, shahrum abdullah, mohd zaki nuawi.  (2013).  fatigue behaviour monitoring of an aisi 1045 carbon steel using the statistical-based z-notched approach.  - materials testing.  55(5):361-368. 

mahfodzah md. padzi, shahrum abdullah, mohd zaki nuawi.  (2013).  assessment of fatigue behaviour under different loading sequences using signal analysis approaches.  - materials testing.  55(3):168-178. 

z. karim, m.z .nuawi, a.y. md. said, j.a. ghani & s. abdullah.  (2013).  integrated kurtosis-based algorithm for z-notch filter (i-kaztm) multilevel coefficients responses toward the simultaneous changes in amplitude and frequency of signals.  - journal of applied sciences.  13(2):232-241. 

z. karim, m.z. nuawi, j.a. ghani, e.a. azrulhisham and s. abdullah.  (2013).  development of machining condition monitoring system using piezoelectric sensor analyzed by i-kaz multilevel method.  - world applied sciences journal.  21(2):264-268. 

k.a. zakaria, s. abdullah, m.j. ghazali.  (2013).  comparative study of fatigue life behaviour of aa6061 and aa7075 alloys under spectrum loadings.  - materials and design.  49:48-57. 

k.a. zakaria, s. abdullah, m.j. ghazali, c.h. azhari.  (2013).  influence of spectrum loading sequences on fatigue life in a high-temperature environment.  - engineering failure analysis.  30:111-123. 

andanastuti muchtar, shahrum abdullah, khairul anwar mastor.  (2013).  frequency analysis of personality development in malaysian engineering students influenced by german sojourn.  - procedia social and behavioral sciences -6th international forum on engineering education (ifee 2012). 

y. s. kong, m. z. omar, l. b. chua and s. abdullah.  (2013).  explicit nonlinear finite element geometric analysis of parabolic leaf springs under various loads.  - scientific world journal.  2013:Article ID 261926. 

e.a. azrulhisham, d.a. wahab, s. abdullah, n. nikabdullah, c.h. che haron.  (2012).  inverse power law model for extrapolation of fatigue life curves.  - international review of mechanical engineering.  6(3):685-690. 

m. f. mat tahir, m. z. nuawi, r. zulkifli, s. abdullah, m. a. mohd sabri.  (2012).  study on correlation of sound absorption coefficient for automotive noise absorption panel material by using sabine method and z-octave method.  - international review of mechanical engineering (ireme).  6(3):640-643. 

m. j. suriani, aidy ali, a. khalina, s. m. sapuan, s. abdullah, haftirman.  (2012).  detection of defects in natural composite materials using thermal imaging technique.  - materials testing.  54(5):340-346. 

shahrum abdullah, kamarul ariffin zakaria, mariyam jameelah ghazali.  (2012).  observation of the fatigue crack propagation rate of an aluminum alloy specimen under fatigue spectrum loadings.  - materials testing.  54(10):663-673. 

m.h. osman, z.m. nopiah and s. abdullah.  (2012).  feature selection for fatigue segment classification system using elitist non-dominated sorting in genetic algorithm.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2012).  wear monitoring of connecting rod bearing via air-borne method analyzed by using i-kaz tm multi level value.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research). 

m. a. mohd sabri, m. z. nuawi, a. arifin, m. f. mohd tahir, s. abdullah.  (2012).  study of correlation between strain and structural-borne ultrasonic signals on automobile engine.  - international review of mechanical engineering.  6(3):607-610. 

ja`afar sahari, syazrin aklili, dzuraidah abd wahab, ruhizan mohd yasin, shahrum abdullah, ahmad kamal ariffin mohd ihsan, shahrir abdullah, mohd zaidi omar, norhamidi muhamad.  (2012).  mercu kesarjanaan pengajaran dan pembelajaran, penyelidikan tindakan di institusi pengajian tinggi.  - 175-189. 

n.k. khamis, m.z. nuawi, s. abdullah, z.m. nopiah, l. abdullah.  (2012).  signal analysis software as an educational tool for engine diagnostic system.  - international review of mechanical engineering.  6(3):666-670. 

a. ariffin, m. f. mat tahir, m. a. mohd sabri, s. abdullah, a. shamsudeen.  (2012).  development of ukm solar car "tuah" for shell eco-marathon asia 2011.  - international review of mechanical engineering.  6(3):671-674. 

m.n. redzuan lee, a. muchtar, k.a. mastor & s. abdullah.  (2012).  personal and environmental factors affecting lifestyle behaviours among ukm-ude double degree students.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012). 

mohd anas mohd sabri, nor kamaliana khamis, mohd faizal mat tahir, zaliha wahid, ahmad kamal ariffin mohd ihsan, abu bakar sulong, shahrum abdullah..  (2012).  pembangunan kurikulum berdasarkan kaedah penilaian gambar besar untuk program kejuruteraan mekanikal.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012). 

mohd anas mohd sabri, nor kamaliana khamis, mohd faizal mat tahir, zaliha wahid, ahmad kamal ariffin mohd ihsanb, abu bakar sulong & shahrum abdullah.  (2012).  pembangunan kurikulum berdasarkan kaedah penilaian gambaran besar untuk program kejuruteraan pembuatan.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012). 

nor kamaliana khamis, zambri harun, mohd faizal mat tahir, zaliha wahid, mohd anas mohd sabri, ahmad kamal ariffin mohd ihsan, shahrum abdullah, abu bakar sulong dan nizaroyani saibani.  (2012).  faktor motivasi dan kekangan memohon jurutera professional di kalangan ahli akademik : satu kajian empirikal.  - kongres pengajaran & pembelajaran ukm 2012. 

mohd faizal mat tahir, zaliha wahid, zainuddin sajuri, shahrum abdullah, jaharah ab. ghani, ahmad kamal ariffin mohd ihsan, abu bakar sulong, mohd anas mohd sabri, norkamaliana khamis.  (2012).  pengukuran dan penilaian secara langsung bagi hasil pembelajaran kursus di jabatan kejuruteraan mekanik dan bahan : kesan terhadap penambahbaikan berterusan..  - kongres pengajaran dan pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, zainuddin sajuri, shahrum abdullah, ahmad kamal ariffin mohd ihsan, abu bakar sulong, jaharah ab ghani, mohd anas mohd sabri.  (2012).  pengukuran dan penilaian secara langsung bagi hasil program kejuruteraan mekanik : kesan terhadap penambahbaiakan berterusan.  - kongres pengajaran dan pembelajaran ukm 2012 -seminar pendidikan kejuruteraan dan alam bina 2012. 

rozli zulkifli, mohd marzuki mustafa, shahrum abdullah, w.m.f. wan mahmood, a. ariffin, z. harun, m. j. ghazali, n. saibani, r. ramli, z.z. abidin, f.m. tahir, m.a. mohd sabri & a. shamsuddeen.  (2012).  persepsi pelajar fakulti kejuruteraan dan alam bina terhadap manfaat menyertai pertandingan automotif peringkat kebangsaan dan antarabangsa.  - kongres pengajaran dan pembelajaran 2012 - seminar pendidikan kejuruteraan dan alam bina 2012. 

nor kamaliana khamis, ahmad kamal ariffin mohd ihsan, shahrum abdullah, nur farah liza ramli, dan zainuddin sajuri.  (2012).  soal selidik pencapaian objektif program dan hasil pembelajaran program alumni jabatan kejuruteraan mekanik dan bahan melalui kaedah atas talian.  - kongres pengajaran & pembelajaran ukm 2012. 

z. m. nopiah, a. lennie, s. abdullah, m. z. nuawi, a. z. nuryazmin, m. n. baharin.  (2012).  effect of fatigue strain data behaviour using cycle counting method.  - international review of mechanical engineering.  6(3):644-648. 

yunoh, mfm; abdullah, s; nopiah, zm; nuawi, mz; ismail, n.  (2012).  fatigue feature classification for automotive strain data.  - 1st international conference on mechanical engineering research 2011 (icmer); kuantan (iop conference series-materials science and engineering). 

mohamed abdalla estai, farihah suhaimi, ahmad nazrun shuid, srijit das, shahrum abdullah and ima-nirwana soelaiman.  (2012).  biomechanical evaluation of fracture healing following administration of piper sarmentosum in ovariectomised rats.  - african journal of pharmacy and pharmacology.  6(3):148-156. 

ruslizam daud, ahmad kamal ariffin, shahrum abdullah and al emran ismail.  (2012).  applied fracture mechanics.  - 13(359-380). 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali.  (2012).  stress intensity factors for surface cracks in round bar under single and combined loadings.  - meccanica.  47:1141-1156. 

a. e. ismail, a. k. ariffin, s. abdullah & m. j. chazali.  (2012).  stress intensity factors under combined tension and torsion loadings.  - indian journal of engineering & materials sciences.  19:5-16. 

sharlina mohamad, ahmad nazrun shuid,sabarul afian mokhtar, shahrum abdullah,ima nirwana soelaiman.  (2012).  tocotrienol supplementation improves late-phase fracture healing compared to alpha-tocopherol in a rat model of postmenopausal osteoporosis: a biomechanical evaluation.  - evidence-based complementary and alternative medicine.  Article ID 372878. 

n.a. khadim, s. abdullah & a.k. ariffin.  (2012).  effective strain damage model associated with finite element modelling and experimental validation.  - international journal of fatigue.  36(1):194-205. 

sharlina m, ahmad nazrun s, shahrum a, norliza m, norazlina m, farihah s, faizah o, ima-nirwana s..  (2012).  effects of tocotrienol on late-phase bone fracture healing in a post-menopausal osteoporosis rat model (biomechanical analysis).  - second tocotrienol symposium, longbeach, california. 

siti noor fathilah, shahrum abdullah, norazlina mohamed, ahmad nazrun shuid.  (2012).  labisia pumila prevents complications of osteoporosis by increasing bone strength in a rat model of postmenopausal osteoporosis.  - evidence-based complementary and alternative medicine.  Article ID 948080. 

zambri harun, mohamad dali isa, zamri mohamed and shahrum abdullah.  (2012).  the contributions of professional engineers at the institutions of higher learning.  - international forum on engineering education (ifee) 2012. 

azrul a. mutalib, roszilah hamid, farah liza mohd isa, shahrum abdullah.  (2012).  evaluation of the engineering graphics course outcomes using multi-choice questions.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011. 

azrul a. mutalib, roszilah hamid, firdaus mohd. hamzah, shahrum abdullah.  (2012).  implementation of obe in the engineering graphics course and analysis of academic performance.  - procedia social and behavioral sciences - ukm teaching and learning congress 2011. 

norbahiah misran, baba mohd. deros, zahira yaacob, shahrom abdullah, n. e. shanmugam, siti kartom kamaruddin, zamri chik, mardina abdullah, wardah fatimah mohd yusoff, ahmad ashrif a. bakar, farizah ansarudin, mohd fairus awang, arif mohd sham.  (2012).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-43. 

m.m. padzi, s. abdullah, m.z. nuawi, a. shamsudeen.  (2012).  fatigue failure assessment of variable amplitude loading (val) on carbon steel aisi 1045 using i-kaz approach.  - international review of mechanical engineering.  6(3):578-582. 

m.h. osman, z.m. nopiah, s. abdullah, m.n. bahrin, a. lennie.  (2012).  self-tuning varri method in preparing fatigue segment.  - proceedings of the 1st ism international statistical conference 2012. 

mohd najib redzuan lee, andanastuti muchtar, shahrum abdullah & khairul anwar mastor.  (2012).  malaysian students` manifestation of cultural adaptation and resilience during their sojourn in germany.  - asian social science.  8(16):96-103. 

m. mohammad, s. abdullah, n. jamaluddin and m.m. padzi.  (2012).  on the need to correlate acoustic emission and fatigue strain signals associated to metallic component life assessment.  - international journal of mechanical and materials engineering.  7(1):78-82. 

s. b. wali, m. s. javadi, m. a. hannan and s. abdullah.  (2012).  traffic sign detection based on shape matching and color segmentation for intelligent vehicles.  - international conference on engineering and built environment (icebe) 2012. 

sharlina mohamad, ahmad nazrun shuid, norazlina mohamed, fazalina mohd fadzilah, sabarul afian mokhtar, shahrum abdullah, faizah othman, farihah suhaimi, norliza muhammad, ima nirwana soelaiman.  (2012).  the effects of alpha-tocopherol supplementation on fracture healing in a postmenopausal osteoporotic rat model.  - clinics.  67(9):1077-1085. 

m.z nuawi, a.r. bahari, s. abdullah, a.k.a.m. ihsan, m.b. ali.  (2012).  mesokurtosis zonal nonparametric signal analysis for dynamic characterisation of metallic material.  - jurnal kejuruteraan.  24:21-27. 

muhammad nubli zulkifli, shahrum abdullah, norinsan kamil othman, azman jalar.  (2012).  some thoughts on bondability and strength of gold wire bonding.  - gold bulletin.  45:115-125. 

wan mohd faizal w.m., mohd anas m.s., mohd faizal m.t., azli a., rozli z., nordin j., sallehuddin m.h., rizauddin r., shahrum a., shahrir a. and azhari s..  (2012).  car body and chassis development of ukm carevo for perodua eco-challenge 2011.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

azman jalar, wan yusmawati wan yusoff, norinsan kamil othman, shahrum abdullah and irman abdul rahman.  (2012).  gamma irradiation effect on load-deflection curve of semiconductor package.  - advanced materials research. 

bahari, a.r., nuawi, m.z., abdullah, s., ihsan, a.k.a.m., ali, m.b..  (2012).  characterisation of the sound and vibration signal of impact testing on automotive component materials.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

muhammd nubli zulkifli, azman jalar, shahrum abdullah, roslinda shamsudin and rozli zulkifli.  (2012).  hardness variation of ball bond wire bonding.  - advanced materials research. 

mohammad, m., abdullah, s., jamaludin, n., nuawi, m.z..  (2012).  correlating strain and acoustic emission signals of metallic component using global signal statistical approach.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research). 

beden, s.m., abdullah, s., ariffin, a.k..  (2012).  fatigue crack growth rate of api x70 steel pipelines under spectrum loading.  - international journal of pressure vessels and piping.  96-97:7-12. 

nopiah, z.m., osman, m.h., abdullah, s., kamarudin, m.n.b.c., asshari, i..  (2012).  satisfying statistical constraints in preparing edited variable amplitude loading history using genetic algorithm.  - modern applied science.  6(9):68-75. 

hanafi, z.h., jamaludin, n., abdullah, s., yusofd, m.f.m., zain, m.s.m..  (2012).  acoustic emission study of corrosion fatigue and fatigue for api 5l x70 gas pipeline steel.  - 2011 2nd international conference on applied mechanics and mechanical engineering, icamme 2011;sanya (applied mechanics and materials). 

kadhim, n.a., abdullah, s., ariffin, a.k., nikabdullah, n..  (2012).  experimental and analytical durability assessment of sae 1045 steel under service loadings.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k..  (2012).  investigation of energy absorbed from an instrumented charpy impact on automotive specimens.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

zakaria, k.a., abdullah, s., ghazali, m.j., azhari, c.h..  (2012).  elevated temperature fatigue fracture behaviour of aluminium alloy subjected to spectrum loadings.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

lashlem, a.a., wahab, d.a., abdullah, s., haron, c.h.c..  (2012).  impact performance of low carbon steel safety beams for car doors.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials). 

s. abdullah, t. e. putra, m. z. nuawi and z. m. nopiah.  (2011).  the use of morlet wavelet coefficients for identifying fatigue damage features.  - pertanika journal of science & technology.  19(5):107-114. 

m. abdulrazzaq, a. k. ariffin, ahmed el-shafie, s. abdullah, z. sajuri & n.a. akeel.  (2011).  adaptive neural network modelling in fatigue life prediction under load history effects.  - advanced materials research. 

a.a.lashlem, dzuraidah abd wahab, shahrum abdullah and che hassan che haron.  (2011).  impact performance of low carbon steel safety beams for car doors.  - regional conference on automotive research (recar) 2011. 

e.a. azrulhisham, d.a. wahab, s. abdullah, n.a.n. mohamed and c.h. che haron.  (2011).  inverse power law model for extrapolation of fatigue life curves.  - regional conference on automotive research (recar) 2011. 

t. e. putra, s. abdullah, m. z. nuawi.  (2011).  data scattering of fatigue damaging segmentation in order to develop the fatigue damaging and morlet wavelet coefficient relationship.  - international review of mechanical engineering.  5(4):605-610. 

n. a. kadhim, s. abdullah, a. k. ariffin and s. m. beden.  (2011).  fatigue failure behaviour study of automotive lower suspension arm.  - key engineering materials. 

a.a. lashlem, dzuraidah abd wahab, shahrum abdullah and che hassan che haron.  (2011).  design assessment for reusability of an automotive safety beam.  - australian journal of basic and applied sciences.  5(11):167-175. 

y.m. asri, e.a. azrulhisham, a.w. dzuraidah, a. shahrir, a. shahrum and z. azami.  (2011).  fatigue life reliability prediction of a stub axle using monte carlo simulation.  - international journal of automotive technology.  12(5):713-719. 

rozli zulkifli, zulkarnain, mohd jailani mohd nor, shahrum abdullah.  (2011).  perforated plate backing with coconut fiber as sound absorber for low and mid range frequencies.  - 8th international conference on fracture and strength of solids 2010, feofs2010 (key engineering materials); kuala lumpur. 

nuawi, mz; bahari, ar; abdullah, s.  (2011).  impact test on steel structures - an experimental investigation.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen source: advances in superalloys, pts 1 and 2 book series: (advanced materials research). 

a. e. ismail, a. k. ariffin, s. abdullah. m. j. ghazali and r. daud.  (2011).  j-integral analysis of surface cracks in round bars under bending moments.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials). 

m. abdulrazzaq, a. k. ariffin, s. abdullah, z. sajuri, a.e ismail and a. ariffin.  (2011).  fatigue crack growth prediction of thick wall cylinder under variable amplitude loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

m. abdulrazzaq, a. k. ariffin, s. abdullah, z. sajuri.  (2011).  crack closure behavior under high-load ratio for aisi 4340 steel.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials). 

putra t.e., abdullah s., nuawi m.z., nopiah z.m., abdullah l., arifin a..  (2011).  extracted fatigue damaging events using the morlet wavelet-based algorithm.  - transactions hong kong institution of engineers.  18(1):22-29. 

f. iberahim, d.a. wahab, z.m. nopiah & s. abdullah.  (2011).  establishment of remanufacturing index for locally manufactured automotive components.  - key engineering materials. 

andanastuti muchtar, mohd najib redzuan lee,
khairul anwar mastor, shahrum abdullah, axel hunger.  (2011).  pattern of changes in personality traits and self-esteem among ukm-ude double degree students.  - 2011 ieee global engineering education conference (educon), amman, jordan. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali, r. daud.  (2011).  j-integral analysis of surface cracks in round bars under bending moment.  - applied mechanics and materials.  52-54:43-48. 

ismail n., abdullah s., nuawi m.z., nopiah z.m., lennie a..  (2011).  durability analysis of an automobile coil spring using hybrid i-kaz.  - source: fracture and strength of solids vii, pts 1 and 2 book series: key engineering materials. 

daud r., ariffin a.k., abdullah s., ismail a.e..  (2011).  j-integral evaluation in two dimensional interacting cracks.  - 2011 international conference on key engineering materials, ickem 2011; sanya (advanced materials research). 

ali m.b., abdullah s., nuawi m.z., padzi m.m., zakaria k.a..  (2011).  experimental analysis of an instrumented charpy impact using signal processing approach.  - 2nd international conference on manufacturing science and engineering, icmse 2011; guilin; 9 april 2011 through 11 april 2011; code 84140 (advanced materials research). 

abdullah s., sahadan s.n., nuawi m.z., nopiah z.m..  (2011).  fatigue data analysis using continuous wavelet transform and discrete wavelet transform.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

beden s.m., abdullah s., ariffin a.k., al-asady n.a..  (2011).  simulation and experimental analysis of fatigue crack growth under cyclic loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

ismail, a.e., ariffin, a.k., abdullah, s., ghazali, m.j..  (2011).  probabilistic assessments of the plate using monte carlo simulation.  - conference on advanced materials and nanotechnology, caman 2009 (iop conference series: materials science and engineering); kuala lumpur. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali, r. daud, m. abdulrazzaq and a. zulkifli.  (2011).  j-integral analysis of surface cracks in round bars under tension loadings.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials). 

abdullah s., ismail n., nuawi m.z., nizwan c.k.e., abdullah m.f..  (2011).  comparative study of the strain signal and the edited strain signal.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research). 

a. e. ismail, a. k. ariffin, s. abdullah and m. j. ghazali.  (2011).  off-set crack propagation analysis under mixed mode loadings.  - international journal of automotive technology.  12(2):225-232. 

mohamad ariff shah mohamed nazmi, dzuraidah abd wahab, shahrum abdullah and razali mohd tihth.  (2011).  development of artificial neural network for optimisation of reusability in automotive components.  - journal of applied sciences.  11(6):996-1003. 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k..  (2011).  test simulation using finite element method.  - conference on advanced materials and nanotechnology, caman 2009; kuala lumpur (iop conference series: materials science and engineering). 

s. abdullah, m.f.m. yunoh, a. jalar and m.f. abdullah.  (2011).  hardness test on an epoxy mold compounds of a quad flat no lead package using the depth sensing nanoindentation.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen (advanced materials research). 

z. m. nopiah, s. abdullah, m. n. baharin, t. e. putra, s. n. sahadan and k. o. willis.  (2011).  comparative study on data editing techniques for fatigue time series signals.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen(advanced materials research). 

s. abdullah, m. n. zulkifli, and a. jalar.  (2011).  nanoindentation approach for evaluation of process parameters effect on the strength of bonded au ball bonds.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen (advanced materials research). 

baharin, m.n., nopiah, z.m., abdullah, s., khairir, m.i., lennie, a..  (2011).  the development of validation technique in variable amplitude loadings strain repetitive data collection.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

nopiah, z.m., osman, m.h., abdullah, s., baharin, m.n..  (2011).  the identification of low fatigue damage using fuzzy double clustering framework.  - 2011 ieee 7th international colloquium on signal processing and its applications, cspa 2011; penang. 

fayyadh nakhaie ahmad refngah, shahrum abdullah, azman jalar, l.b. chua.  (2011).  microstructural behaviour study and fea-based fatigue simulation on parabolic leaf spring.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials). 

n. nik abdullah, josé f.o. correia, abílio m.p. de jesus,
mohammad hadi hafezi, s. abdullah.  (2011).  assessment of fatigue crack growth data available for materials from portuguese bridges based on unigrow model.  - engineering procedia. 

m. b. ali, s. abdullah, m. z. nuawi, m. m. padzi & k. a. zakaria.  (2011).  experimental analysis of an instrumented charpy impact using statistical study based data analysis.  - international journal of mechanical and materials engineering (ijmme).  6(2): 260-268. 

aendraa azhar abdul aziz, muhammad faizol ahmad ibrahim, azman jalar, junaidi syarif, shahrum abdullah, nasrizal mohd rashdi, zainudin kornain.  (2011).  effect of different fillers on microstructure and tensile properties of welded aa6061-t6.  - key engineering materials. 

f. harun, azman jalar, shahrum abdullah, mohd faridz mod yunoh.  (2011).  effect of hook location for ultra fine pitch wirebonding pull testing method.  - source: fracture and strength of solids vii, pts 1 and 2 book series: key engineering materials. 

m.f. m. yunoh, s. abdullah, a. jalar, l. abdullah and m.f. abdullah.  (2011).  durability assessment of quad flat no-lead package using signal analysis.  - source: fracture and strength of solids vii, pts 1 and 2 book series: key engineering materials. 

i. abdullah, a. jalar, s. abdullah, m. f. rosle and m.f. mod yunoh.  (2011).  stress distribution effect on a stacked-die qfn package manufacturing processes.  - 8th international conference on fracture and strength of solids 2010, feofs2010 (key engineering materials); kuala lumpur. 

mohd raihan taha, baba mohd. deros, zahira yaacob, shahrom abdullah, n. e. shanmugam, siti kartom kamaruddin, zamri chik, mardina abdullah, wardah fatimah mohd yusoff, nangkula utaberta, ahmad ashrif a. bakar, aida baharuddin, arif mohd sham.  (2011).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-68. 

m. j. ghazali, s. e. mat kamal, s. abdullah and h. misran.  (2011).  characterizations of cu-based coated al7075 via plasma-spray method - a wear case study.  - international journal of nanoscience.  10(6):1269-1274. 

e. azrulhisham, y.m. asri, a.w. dzuraidah, n.m. nik abdullah, c.h. che hassan and a. shahrom.  (2011).  application of road simulator service loads in automotive component durability assessment.  - the open industrial and manufacturing engineering journal.  4:1-7. 

a. jalar, m. n. zulkifli and s. abdullah.  (2011).  nanoindentation test for the strength distribution analysis of bonded au ball bonds.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen (advanced materials research). 

a. jalar, z.kornain, r.rasid, s.abdullah, n.k. othman.  (2011).  the effect of underfill fillet geometry to die edge stress for flip chip packaging.  - international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen; 6 november 2010 through 8 november 2010 (advanced materials research). 

n. k. othman, m. n. zulkifli, a. jalar, and s. abdullah.  (2011).  nanoindentation test for the stiffness distribution analysis of bonded au ball bonds.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen (advanced materials research). 

jamilah mustafa, junaenah sulehan, latiffah pawanteh, shahrum abdullah, hassan basri, andanastuti muchtar, khairul anwar mastor, zulkiple abdul ghani, hunger axel.  (2011).  internationalisation and its implications for intercultural maturity among academic staff : a case study.  - procedia social and behaviourial sciences. 

s. abdullah, m. b. ali, m. z. nuawi, z. m. nopiah and a. k. ariffin.  (2011).  evaluating charpy impact signals with different frequencies using power spectrum densities.  - 2010 international conference on advances in materials and manufacturing processes, icammp 2010; shenzhen(advanced materials research). 

daud r., ariffin a.k., abdullah s., ismail a.e..  (2011).  computation of mixed mode stress intensity factor for parallel edge cracks.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials). 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali and r. daud.  (2011).  mode iii stress intensity factors of surface crack in round bars.  - 2011 international conference on key engineering materials, ickem 2011; sanya(advanced materials research). 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali and r. daud.  (2011).  j-integral analysis of surface cracks in round bars under combined loadings.  - 2011 international conference on key engineering materials, ickem 2011; sanya (advanced materials research). 

k.a.zakaria, s. abdullah, m.j. ghazali, m.z.nuawi, m.m.padzi.  (2011).  fatigue damage assessment of the engine mount bracket using a statistical based approach.  - 2nd international conference on manufacturing science and engineering, icmse 2011; guilin (advanced materials research). 

n. nik abdullah, m.hadi hafezi and s. abdullah.  (2011).  analytical concepts for recent development in fatigue crack growth under variable amplitude loading. part i: qualitative interpretation.  - conference: 8th international conference on fracture and strength of solids (feofs) 2010 location: kuala lumpur, malaysia date: jun 07-09, 2010(key engineering materials). 

m.j. ghazali, s.e. mat kamal and s. abdullah.  (2011).  characterisations of cu-based coated al7075 via plasma-spray technique.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(fracture and strength of solids vii, pts 1 and 2). 

s.e. mat kamal, m.j. ghazali and s. abdullah.  (2011).  effect of plasma spray variables on cu-ni coated a7075.  - feofs2010 - 8th international conference on fracture and strength of solids 2010 (key engineering materials) ; kuala lumpur. 

daud r., ariffin a.k., abdullah s., ismail a.e., zulkifli a..  (2011).  computation of stress intensity factor for multiple cracks using singular finite element.  - 2011 international conference on key engineering materials, ickem 2011(advanced materials research). 

lennie, a., nopiah, z.m., abdullah, s., baharin, m.n., nuawi, m.z., arifin, a..  (2011).  variable amplitude loading strains data distribution using probability density function and power spectral density.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

zainudin kornain, azman jalar, rozaidi rasid and shahrum abdullah.  (2011).  the study of underfill epoxy hardness in reducing curing process time for flip chip packaging.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

abdulrazzaq m., ariffin a.k., el-shafie a., abdullah s., sajuri z., akeel n.a..  (2011).  adaptive neural network modelling in fatigue life prediction under load history effects.  - 2011 international conference on advanced engineering materials and technology, aemt 2011; sanya; 29 july 2011 through 31 july 2011 (advanced materials research). 

beden s.m., abdullah s., ariffin a.k., kadhim n.a..  (2011).  observing load sequence effects on simulated and experimental fatigue crack growth occurrence.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials). 

shahrum, a., teuku, e.p., mohd, z.n., zulkifli, m.n..  (2011).  vibrational fatigue analysis of a strain loading using the frequency and wavelet filtering methods.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2011).  optimization of integrated kurtosis-based algorithm for z-filter (i-kaz ) tm coefficient using multi level signal decomposition technique.  - world applied sciences journal.  14 (10): 1541-1548. 

kadhim n.a., abdullah s., ariffin a.k..  (2011).  effect of the fatigue data editing technique associated with finite element analysis on the component fatigue design period.  - materials and design.  32(2):1020-1030. 

aziz, a.a.a., ibrahim, m.f.a., jalar, a., junaidi, s., abdullah, s., rashdi, n., kornain, z..  (2011).  effects of different fillers on microstructure and tensile properties of welded aa6061-t6.  - 8th international conference on fracture and strength of solids 2010, feofs2010 (key engineering materials); kuala lumpur. 

daud r., ariffin a.k., abdullah s., ismail a.e..  (2011).  fatigue failure analysis using the theory of critical distance.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

ali, mb; abdullah, s; nuawi, mz; ariffin, ak.  (2011).  analysis of an instrumented charpy impact using power spectrum density.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(key engineering materials). 

redzuan lee, m.n., muchtar, a., sulehan, j., mastor, k.a., hunger, a., abdullah, s..  (2011).  contribution to the understanding of cultural dynamics in co-operation between malaysia and germany.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka (procedia - social and behavioral sciences). 

yusof m.f.m., nizwan c.k.e., jamaludin n., abdullah s..  (2011).  acoustic emission behavior during fatigue crack of api5lx70 gas pipeline steel.  - 2011 international conference on information engineering for mechanics and materials, icimm 2011; shanghai. 

alzaqebah m., abdullah s..  (2011).  hybrid artificial bee colony search algorithm based on disruptive selection for examination timetabling problems.  - 5th annual international conference on combinatorial optimization and applications, cocoa 2011; zhangjiajie. 

kadhim n.a., abdullah s., ariffin a.k., bedan s.m..  (2011).  fea based fatigue life estimation of automotive component correlated with fatigue data editing technique.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research). 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j., abdulrazzaq m..  (2011).  finite element analysis on the stress intensity factor under combined bending and torsion loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

mohammad k.a., ali a., oshkour a., sahari b.b., abdullah s..  (2011).  investigation of creep fatigue crack propagation in aluminium tube.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials). 

mastor, k.a., sulehan, j., mustafa, j., pawanteh, l., basri, h., abdullah, s., mokthtar, a., (...), axel, h..  (2011).  personality traits orientation of university kebangsaan malaysia (ukm) and ukm - university duisburg-essen (ude) engineering students.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka (procedia - social and behavioral sciences). 

abdul razzaq m., ariffin a.k., al-shafie a., abdullah s., sajuri z., kadhim n.a..  (2011).  fatigue life modelling under constant amplitude loading using adaptive neuro - fuzzy (anfis) application.  - australian journal of basic and applied sciences.  5(8):1194-1204. 

johari j., sahari j., abd wahab d., abdullah s., abdullah s., omar m.z., muhamad n..  (2011).  difficulty index of examinations and their relation to the achievement of programme outcomes.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka. 

mohd nopiah z., ismail n.a., khatimin n., abdullah s., mustafa m.m..  (2011).  muet score and loadings hour : an analysis on the relationship towards academic performance.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka. 

johari j., wahab d.a., sahari j., abdullah s., ramli r., yassin r.m., muhamad n..  (2011).  systematic infusion of creativity in engineering design courses.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2011).  probabilistic high cycle multiaxial fatigue analysis using finite element method.  - transactions hong kong institution of engineers.  18(2):13-18. 

ali, m.b., abdullah, s., nuawi, m.z., ariffin, a.k., mohammad, m..  (2011).  evaluating charpy impact signals using power spectrum densities: a finite element method approach.  - international journal of mechanical and materials engineering.  6(1):92-101. 

abdullah, s; beden, sm; ariffin, ak; nopiah, zm.  (2011).  effects of load sequence on fatigue crack growth in pressure vessels.  - 2011 international conference on materials science and engineering applications, icmsea 2011; xi`an(advanced materials research). 

r. daud, a.k. ariffin, s.abdullah.  (2010).  an investigation of stress intensity factor for two equal parallel cracks using analytical and numerical formulation.  - regional engineering postgraduate conference (epc) 2010, fakulti kejuruteraan dan alam bina, universiti kebangsaan malaysia. 

k.a. zakaria, s. abdullah & m. j. ghazali.  (2010).  the study of fatigue crack propagation in metal using finite element analysis.  - proceedings of 8th international conference on fracture & solids 2010, kuala lumpur (key engineering materials). 

s.m. beden, s. abdullah, a.k. ariffin, n.a. al-asady.  (2010).  fatigue crack growth simulation of aluminium alloy under spectrum loadings.  - materials and design.  31(7):3449-3456. 

m.h. yazdi, s. abdullah, i. hashim, zulkifli mohd nopiah, azami zaharim & k. sopian.  (2010).  convective heat transfer of slip liquid flow past horizontal surface within the porous media at constant heat flux boundary conditions.  - proceedings of the american conference om applied mathematics (american-math `10), harvard university, cambridge, usa, january 27-29, 2010. 

t. e. putra, s. abdullah, m. z. nuawi and z. m. nopiah.  (2010).  wavelet coefficient extraction algorithm for extracting fatigue features in variable amplitude fatigue loading.  - journal of applied sciences.  10(4):277-283. 

mohd zahrin a. wahab, azman jalar, shahrum abdullah, hazian mamat.  (2010).  characterization of 0.5µm bicmos gate oxide using time dependent dielectric breakdown test.  - advanced materials research. 

shahrum abdullah, mohd faridz mod yunoh and azman jalar.  (2010).  three-point bending test behaviour of a qfn semiconductor package.  - advanced materials research. 

khairul anwar mastor, junainah solehan, hassan basri, shahrum abdullah dan andanastuti muchtar.  (2010).  personality profiles of ukm and ukm-ude engineering students.  - seminar pendidikan kejuruteraan & alam bina (peka` 10) memupuk inovasi dalam pengajaran & pembelajaran di fakulti kejuruteraan & alam bina. 

s. abdullah, t. e. putra, m. z. nuawi, z. m. nopiah, a. arifin and l. abdullah.  (2010).  extracting fatigue damage features using stft and cwt.  - wseas transactions on signal processing.  6(3):91-100. 

s. abdullah, n. ismail, m. z. nuawi, m. z. nopiah & a. ariffin.  (2010).  using the hybrid kurtosis-based method to correlate strain and vibration signals.  - wseas transactions on signal processing.  6(3):79-90. 

s. abdullah, t. e. putra, m. z. nuawi, z. m. nopiah, a. arifin and l. abdullah.  (2010).  the morlet wavelet analysis for fatigue feature clustering.  - wseas transactions on mathematics.  9(5):345-354. 

z. m. nopiah, m. i. khairir, s. abdullah, m. n. baharin, and a. arifin.  (2010).  time complexity estimation and optimisation of the genetic algorithm clustering method.  - wseas transactions on mathematics.  9(5):334-344. 

z. m. nopiah, m. n. baharin, s. abdullah, m. i. khairir and a. ariffin.  (2010).  running damage extraction technique for identifying fatigue damaging events.  - wseas transactions on mathematics.  9(5):324-333. 

a. lennie, s. abdullah, z.m. nopiah and m.n. baharin.  (2010).  behavioural investigation of fatigue time series using the statistical approach.  - journal of applied sciences.  10 (16):1714-1722. 

e. a. azrulhisham, y. m. asri, a. w. dzuraidah, n. m. nik abdullah, a. shahrum, and c. h. che hassan.  (2010).  evaluation of fatigue life reliability of steering knuckle using pearson parametric distribution model.  - international journal of quality, statistics, and reliability.  Article ID 816407. 

m.z. nuawi, taib i. mohamad, m. f. h. hussin, s. abdullah, r. zulkifli, m.k. zakaria.  (2010).  preliminary study of condition-based monitoring (cbm) on automotive gearbox using ultrasonic signals.  - world applied sciences journal.  9(2):118-126. 

mohd raihan taha, zahira yaacob, shahrom abdullah, amiruddin ismail, zuhairuse md. darus, siti kartom kamaruddin, baba mohd deros, badariah bais, zamri chik, muhammad farihan irfan mohd nor, mardina abdullah, aida baharuddin & arif mohd sham.  (2010).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-113. 

m.f.m yunoh, s. abdullah, a. jalar, m. f. rosle and s.a. radzi.  (2010).  micromechanical studies of 4n gold wire for fine pitch wirebonding.  - journal of science and technology.  2(1):121-134. 

z. kornain, a. jalar, r. rashid , s. abdullah, b. lee.  (2010).  comparative study of phenolic-based and amine-based underfill materials in flip chip plastic ball grid array package.  - journal of electronic packaging, transactions of the asme.  132(4):1012-1017. 

zainudin kornain, azman jalar, rozaidi rasid and shahrum abdullah.  (2010).  an optimization of two-steps curing profile to eliminate voids formation in underfill epoxy for hi-cte flip chip packaging.  - advanced materials research. 

jamilah mustafa, junaenah sulehan, latiffah pawanteh, shahrum abdullah, hassan basri, andanastuti muchtar, khairul anuar mastor dan zulkiple abd ghani.  (2010).  internationalisation and its implications for intercultural maturity among academic staff: a case study.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010. 

a.e.ismal, a.k.ariffin, s.abdullah dan m.j.ghazali.  (2010).  stress intensity factors for surface cracks in round bars under combined bending and torsion loadings.  - international review of mechanical engineering (ireme).  4(7):827-832. 

andanastuti muchtar, junaenah sulehan, shahrum abdullah, khairul anwar mastor, axel hunger, mohd najib redzuan lee & monika jusdi.  (2010).  cultural adaptation and resilience of ukm double degree students in university of duisburg-essen.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010. 

abdullah s, ismail n, nuawi mz, nopiah mz, arifin a.  (2010).  study on correlation between strain and vibration signal using hybrid i-kaz method.  - 5th iasme/wseas international conference on continuum mechanics/7th wseas international conference on fluid mechanics/7th wseas international conference on heat and mass transfer univ cambridge. 

n. nik abdullah, m. hadi hafezi, s. abdullah.  (2010).  a new engineering stochastic two-parameter model (smax. s) for calculating damage rate.  - world academy of science, engineering and technology. 

a. e. ismail, a. k. ariffin, s. abdullah, m. j. ghazali dan z. ahmad.  (2010).  analisis kamiran-j pada bar yang mengandungi retak permukaan kenaan momen lentur.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia. 

n. nik abdullah, m. hadi hafezi and s. abdullah.  (2010).  determination of micro-support constant rho* of neuber`s rule using elastic plastic fracture mechanics.  - 6th australasian congress on applied mechanics, acam 6 perth, australia. 

juridah johari, jaafar sahari, dzuraidah abd wahab, shahrum abdullah, shahrir abdullah, mohd zaidi omar dan norhamidi muhamad.  (2010).  indeks kesukaran peperiksaan dan hubung kait dengan pencapaian hasil pembelajaran program.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010. 

abdullah, s; ariffin, ak; nizwan, cke; abdullah, mf; jalar, a; yunoh, mfm.  (2010).  failure analysis of a semiconductor packaging leadframe using the signal processing approach.  - international journal of modern physics b.  24(1-2):175-172. 

abdullah, s; putra, te; nuawi, mz; nopiah, zm; arifin, a; abdullah, l.  (2010).  time-frequency localisation analysis for extracting fatigue damaging events.  - ispra '09: proceedings of the 9th wseas international conference on signal processing, robotics and automation. 

nopiah, zm; baharin, mn; abdullah, s; khairir, mi; ariffin, a.  (2010).  an extraction of fatigue damaging events by using running damage extraction (rde) technique.  - ispra '09: proceedings of the 9th wseas international conference on signal processing, robotics and automation. 

nopiah, zm; khairir, mi; abdullah, s; baharin, mn; arifin, a.  (2010).  time complexity analysis of the genetic algorithm clustering method.  - ispra `09: proceedings of the 9th wseas international conference on signal processing, robotics and automation. 

m. b. ali, s. abdullah, m.z. nuawi, a.k. ariffin and k.a. zakaria.  (2010).  statistical analysis to evaluate charpy impact signals: a finite element method approach.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia. 

m. m. padz, s. abdullah, z. nuawi.  (2010).  a statistical based analysis approach on fatigue failure assessment of carbon steel.  - international conference on the advancement of material and nano technology (applied mechanics and materials). 

m. f. m. yunoh, s. abdullah and a. jalar.  (2010).  mechanical properties of qfn semiconductor package using flexural test.  - world applied sciences journal.  9:40-42. 

ahmad nazrun shuid, sharlina mohamad, norazlina mohamed, fazalina mohd fadzilah, sabarul afian mokhtar, shahrum abdullah, faizah othman, farihah suhaimi, norliza mohamed, ima nirwana soelaiman.  (2010).  effects of calcium supplements on fracture healing in a rat osteoporotic model.  - journal of orthopaedic research.  28(12):1651-1656. 

maryam jameelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman, shahril mohamad.  (2010).  kajian awal ke atas bilah keris melayu - suatu pandangan saintifik.  - prosiding persidangan antarabangsa sains dan teknologi di alam melayu (salam 1) : perkembangan sains dan teknologi di alam melayu, institut alam dan tamadun melayu ukm. 

h. a. jalaludin, s. abdullah and m. j. ghazali.  (2010).  structural and thermal analysis of piston crown for compressed natural gas direct injection engine.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia. 

shahrum abdullah, mohd zaidi omar, zulkifli mohd nopiah, nornahiah misran, siti aminah osman, norghainy mohd. tawil, siti rozaimah sheikh abdullah, dzuraidah abd. wahab, adi irfan che ani, hamfad.  (2010).  prosiding seminar pendidikan kejuruteraan dan alam bina 2009 (peka10) sempena kongres pengajaran dan pembelajaran ukm 2010.  - kongres pengajaran dan pembelajaran ukm 2010. 

andanastuti muchtar, mohd najib redzuan lee,
khairul anwar mastor, junaenah sulehan, shahrum
abdullah, monika jusdi, axel hunger.  (2010).  investigation on students? personality development of ukm-ude double degree programme.  - proceeding 2nd international congress on engineering education (iceed 2010), fakulti kejuruteraan dan alam bina ukm. 

haziyah hussin, che husna azhari, zuraidah abdul wahab, shahrum abdullah dan syaimak abdul shukor.  (2010).  a basic pattern drafting for malay traditional apparels using computer aided design (cad).  - prosiding persidangan antarabangsa sains dan teknologi di alam melayu (salam 1) : perkembangan sains dan teknologi di alam melayu, institut alam dan tamadun melayu ukm. 

abdullah, s; putra, te; nuawi, mz; nopiah, zm; arifin, a; lennie, a.  (2010).  using monet wavelet coefficients to cluster variable amplitude fatigue features.  - 5th iasme/wseas international conference on continuum mechanics/7th wseas international conference on fluid mechanics/7th wseas international conference on heat and mass transfer univ cambridge. 

nazmi, m.a.s.m., wahab, d.a., abdullah, s..  (2010).  reliability prediction of automotive component for reuse.  - international design and concurrent engineering 2010. 

zulkifli mohd nopiah, nur arzilah ismail, nuraini khatimin, shahrum abdullah and mohd marzuki mustafa.  (2010).  muet score and loading hours: an analysis on the relationship towards academic performance of the first year ukm engineering students.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010. 

juridah johari, dzuraidah abd wahab, jaafar sahari, shahrum abdullah, rizauddin ramli, ruhizan mohd yassin dan norhamidi muhamad.  (2010).  penerapan daya cipta secara sistematik dalam kursus berteraskan reka bentuk.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2010 (peka2010) sempena kongres pengajaran dan pembelajaran ukm 2010. 

s.h.salleh, m.z.omar, j.syarif and s.abdullah.  (2009).  microstructural characterization of carbides in 440c martensitic stainless steel.  - 4th international conference on recent advances in materials, minerals & environment 2009 and 2nd asian symposium on materials and processing 2009. 

andanastuti muchtar, shahrum abdullah, syifaul huzni.  (2009).  book of abstracts mini symposium on fracture and strength of solids `09.  - 33. 

r. mamat, d. a. wahab, s. abdullah.  (2009).  the integration of cad and life cycle requirements in automotive seat design.  - european journal of scientific research.  31(1):148-156. 

lily amelia, d.a. wahab, s. abdullah and k. khalid.  (2009).  design of seat belts: safety and comfort for expectant mothers.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009). 

azami zaharim, mohd zaidi omar, shahrum abdullah, hassan basri, norhamidi muhamad.  (2009).  international trends and the profiles of malaysian engineers.  - european journal of scientific research.  28(2):301-309. 

zulkifli mohd nopiah, muhammad ihsan khairir, shahrum abdullah, che ku eddy nizwan, mohd noor baharin.  (2009).  peak-valley segmentation algorithm for kurtosis analysis and classification of fatigue time series data.  - european journal of scientific research.  29(1):113-125. 

shahrum abdullah, mohammad darhim ibrahim, azami zaharim dan zulkifli mohd nopiah.  (2009).  analisis data rawak terikan-lesu menggunakan kaedah statistik purata-tergerak.  - jurnal kejuruteraan.  21: 21-32. 

mohd zaidi omar, shahrum abdullah, dzuraidah abd.wahab, siti rozaimah sheikh abdullah, zulkifli mohd nopiah, adi irfan che ani, norngainy mohd. tawil, nuryazmin ahmat zainuri.  (2009).  seminar pendidikan kejuruteraan & alam bina (peka09).  - prosiding seminar pendidikan kejuruteraan dan alam bina (peka 2009). 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali.  (2009).  numerical modeling of surface cracks under combined loadings.  - seminar on engineering mathematics 2009 (emas`09). 

m. abdulrazzaq, a. k. ariffin, s. abdullah and z. sajuri.  (2009).  fatigue crack growth life of thick-walled cylinder with circumferential cracks under different loading.  - proceeding of enginneering mathematics seminar 2009, penerbit ukm. 

azami zaharim, shahrum abdullah, mohammad darahim ibrahim, zulkifli mohd nopiah.  (2009).  genetic algorithm in time series fatigue analysis.  - european journal of scientific research.  28(1):68-75. 

s. abdullah, m. f. abdullah, a. k. ariffin, a. jalar.  (2009).  effect of leadframe oxidation on the reliability of a quad flat no-lead package.  - journal of electronic packaging (transaction of the asme).  131(3):0310021-0310027. 

s. m. beden, s. abdullah and a. k. ariffin.  (2009).  modeling of fatigue crack growth under constant and variable amplitude loading.  - international journal of mechanical and materials engineering.  4(2):131-135. 

m.m. rahman, a.k. ariffin, s. abdullah, m.m. noor and rosli a.b.  (2009).  durability assessment of cylinder block for two stroke free piston linear engine using random loading.  - american journal of applied sciences.  6(4):726-735. 

abdullah s., nizwan c.k.e., nuawi m.z..  (2009).  a study of fatigue data editing using the short-time fourier transform (stft).  - american journal of applied sciences.  6(4):565-575. 

f. n. ahmad refngah, s. abdullah, a. jalar and l. b. chua.  (2009).  fatigue life evaluation of two types of steel leaf springs.  - international journal of mechanical and materials engineering (ijmme).  4(2):34-38. 

n. a. al-asady, s. abdullah, a. k. ariffin, s. m. bedenand m. m. rahman.  (2009).  fea based durability using strain-life models for different medium carbon steel as fabrication materials for an automotive component.  - international journal of mechanical and materials engineering (ijmme).  4(2):141-146. 

h. budiman, m. z. omar1, a. jalar, j. syarif, m. j. ghazali and s. abdullah.  (2009).  production of feedstock material for semi-solid material processing by coolign slope casting process.  - international journal of mechanical and materials engineering (ijmme).  4(2):74-78. 

abu bakar mohamad, zahira yaacob, shahrom abdullah, mardina abdullah, amiruddin ismail, zuhairuse md. darus, siti kartom kamaruddin, baba mohd deros, badariah bais, zamri chik, muhammad farihan irfan mohd nor, aida baharuddin.  (2009).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-116. 

m.m. rahman, a.k. ariffin, s. abdullah, m.m. noor, rosli a. bakar and m. a. maleque.  (2009).  assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach.  - american journal of applied sciences.  6(4):715-725. 

mohd zaki nuawi, shahrum abdullah, shahrir abdullah, s.m haris, azli arifin.  (2009).  matlab: a comprehensive reference for engineers.  - 210. 

s. abdullah, a. fahruddin, j. syarif and m. z. omar.  (2009).  modelling of fiber metal laminate (fml) composite using the residual stiffness and strength model.  - international journal of mechanical and materials engineering (ijmme).  4(2):186-190. 

mohd zaki nuawi, nurazima ismail, shahrum abdullah and ahmad rasdan ismail.  (2009).  correlation study between fatigue and vibration signal using newly developed statistical analysis: i-kaz.  - sixteenth international congress on sound and vibration (icsv16). 

m.f. m. yunoh, s. abdullah and a. jalar.  (2009).  flexural test properties of qfn semiconductor package in elevated temperature.  - proc of nanotech malaysia 2009 conference, kuala lumpur. 

zulkifli mohd nopiah, nuryazmin ahmat zainuri, shahrum abdullah, izamarlina asshaari, haliza othman.  (2009).  problem based learning in statistics engineering course: a way to improve generic skills among engineering students.  - prosiding seminar pendidikan kejuruteraan dan alam bina 2009. 

nuawi m. z., lamin f., ismail a. r., abdullah s., and wahid z..  (2009).  a novel machining signal filtering technique : z-notch filter.  - journal world academy of science, engineering and technology.  54:24-29. 

s. m. beden, s. abdullah and a. k. ariffin.  (2009).  towards standardising the fatigue crack simulation studies on metallic materials.  - icces.  10(2):41-50. 

m.f. rosle, i. abdullah, s. abdullah, m.a.a. hamid, a.r. daud and a. jalar.  (2009).  effect of manufacturing stresses to die attach film performance in quad flatpack no-lead stacked die packages.  - american journal of engineering and applied sciences.  2(1):17-24. 

abdullah s., yunoh m.f.m., kamarudin h., jalar a..  (2009).  role of strain rate on the micromechanical characterization properties of 4n gold micro wire: micro tensile and nanoindentation.  - european journal of scientific research.  28(1):33-43. 

abdullah s., loman m., jamaluddin n..  (2009).  signal processing method for evaluating fatigue damage in a piping system.  - journal of applied sciences.  9(13):2381-2389. 

zulkifli r., nor m.j.m., ismail a.r., nuawi m.z., abdullah s., tahir m.f.m., rahman m.n.a..  (2009).  comparison of acoustic properties between coir fibre and oil palm fibre.  - european journal of scientific research.  33(1):144-152. 

nopiah z.m., zainuri n.a., asshaari i., othman h., abdullah s..  (2009).  improving generic skills among engineering students through problem based learning in statistics engineering course.  - european journal of scientific research.  33(2):270-278. 

nopiah z.m., khairir m.i., abdullah s., baharin m.n..  (2009).  a weighted genetic algorithm based method for clustering of heteroscaled datasets.  - 2009 international conference on signal processing systems, icsps 2009. 

abdullah s., beden s.m., ariffin a.k., al-asady n.a..  (2009).  fatigue crack growth modelling of aluminium alloy under constant and variable amplitude loadings.  - sdhm structural durability and health monitoring.  5(2):109-131. 

beden, s.m., abdullah, s., ariffin, a.k..  (2009).  review of fatigue crack propagation models for metallic components.  - european journal of scientific research.  28(3):364-397. 

s. h. salleh, m. z. omar, j. syarif, m. j. ghazali, s. abdullah and z. sajuri.  (2009).  investigation of microstructures and properties of 440c martensitic stainless steel.  - international journal of mechanical and materials engineering.  49(2):21-24. 

s.h. salleh, m.z. omar, j. syarif, s. abdullah.  (2009).  carbide formation during precipitation hardening of ss440c steel.  - european journal of scientific research.  34(1):83-91. 

z. m. nopiah, m.n. baharin, s. abdullah, m. i. khairir and c. k. e. nizwan.  (2008).  abrupt changes detection in fatigue data using the cumulative sum method.  - wseas transactions on mathematics.  7(12):708-717. 

nuawi m. z., lamin f., abdullah s., nor m. j. m., arifin a..  (2008).  cluster analysis using i-kaz coefficient to assist machining monitoring process.  - international journal of mathematical models and methods in applied sciences.  3(2):439-446. 

s. abdullah.  (2008).  extraction of fatigue damaging events from road spectrum loadings using the wavelet-based fatigue data editing algorithm.  - sdhm structural durability and health monitoring.  4(4):181-197. 

prof. madya dr.shahrum abdullah.  (2008).  pembangunan algoritma pemgelompokan dan pengkelasan kerosakan lesu yang disebabkan oleh pembebanan spektra.  - seminar pemantauan projek penyelidikan (gup) 2007. 

m.z.nuawi, s. abdullah, a.r.ismail and n.f. kamaruddin.  (2008).  a novel analysis (i-kaz 3d) for three axial vibration signal in bearing condition monitoring.  - international conference on system science and simulation in engineering (icossse?08), world scientific and engineering academy and society (wseas). 

m.z. omar, a. alfan, j. syarif, s. abdullah, m.j. ghazali and z. sajuri.  (2008).  modelling of steels in semi solid zones prior to thixoforming process.  - indonesian nanoletter.  2(3):41-48. 

m.j. ghazali, w.m. rainforth, s. abdullah, a.k.a. ihsan & m. hassan.  (2008).  subsurface deformation of worn al-cu and al-mg alloys.  - advanced materials research.  33-37:483-488. 

m.z. omar, a. alfan, j. syarif, z. sajuri, s. abdullah, m.j. ghazali.  (2008).  modelling of xw-42 steel for semi-solid processing.  - computers and simulation in modern science.  2:39-44. 

s. abdullah, n. a. al-asady, a. k. ariffin, m. m. rahman.  (2008).  a review on finite element analysis approaches in durability assessment of automotive components.  - journal of applied sciences.  8(12): 2192-2201. 

azami zaharim, ibrahim mohamed, shahrum abdullah and mohd. sahar yahya.  (2008).  an evaluation of test statistics for detecting level change in bl(1,1,1,1) models.  - wseas transactions on mathematics.  7(2):67-70. 

s. abdullah, z. endut, i. ahmad, a. jalar and s. m. yusof.  (2008).  dicing laminated wafer for qfn 3d stacked die packaging..  - advanced materials research.  31:202-205. 

s. abdullah, m.d. ibrahim, z. mohd nopiah and a. zaharim.  (2008).  analysis of a variable amplitude fatigue loading based on the quality statistical approach.  - journal of applied sciences.  8(8):1590-1593. 

s. abdullah, m. d. ibrahim, a. zaharim and z. mohd nopiah.  (2008).  statistical analysis of a nonstationary fatigue data using the arima approach..  - wseas transactions on mathematics.  7(2):59-66. 

s. abdullah, s. n. sahadan, m. z. nuawi and z. m. nopiah.  (2008).  fatigue road signal denoising process using the 4th order of daubechies wavelet transforms.  - journal of applied sciences.  8(14):2496-2509. 

a. k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2008).  probabilistic analysis of cracked structures with uncertainty parameters.  - advanced materials research.  33-37(1):223-228. 

m.z. nuawi, m.j.m. nor, n. jamaludin, s. abdullah, f. lamin and c.k.e. nizwan.  (2008).  development of integrated kurtosis-based algorithm for z-filter technique.  - journal of applied sciences.  8(8):1541-1547. 

m. z. nuawi, s. abdullah, a. r. ismail, r. zulkifli, m. k. zakaria and m. f. h. hussin.  (2008).  a study on ultrasonic signals processing generated from automobile engine block using statistical analysis.  - wseas transactions on signal processing.  4(5):279-288. 

d.a. wahab, n.f. adull manan, m.a. hannan, s. abdullah and a. hussain.  (2008).  designing for comfort and reliability in an intelligent car seat.  - american journal of applied sciences.  5(12):1787-1792. 

s. abdullah, s. m. beden, a. k. ariffin, m. m. rahman.  (2008).  fatigue life assessment for metallic structure: a case study of shell structure under variable amplitude loading.  - journal of applied sciences.  8(9):1622-1631. 

nuawi m. z., lamin f., nor m. j. m., jamaluddin n., abdullah s..  (2008).  the noise cancelling technique using z-filter on machining signal..  - proc. of the 7th wseas international conference on signal processing, robotics and automation (ispra '08), cambridge. 23rd ? 25th feb 2008. 

nuawi m. z., abdullah s., ismail a. r., zakaria m. k., lamin f., hussin m. f. h.  (2008).  statistical analysis on ultrasonic signals measured on automobile engine block.  - proceeding of multimedia systems & signal processing (musp '08). 6th-8th april 2008, hangzhou, china. 

z. m. nopiah, m. i. khairir, s. abdullah, c. k. e. nizwan.  (2008).  peak-valley segmentation algorithm for fatigue time series data.  - wseas transactions on mathematics.  7(12):698-707. 

shahrum abdullah, mohamad faizal abdullah and ahmad kamal ariffin.  (2008).  the effect of leadframe oxidation of a quad flat no-lead semiconductor package under cyclic loading.  - journal of applied sciences.  8(9):1676-1683. 

ahmad rasdan ismail, azmi hassan, syamimi syamsuddin, mohd zaki nuawi, shahrum abdullah and hairunnisa mohamad ibrahim.  (2008).  the repeatability analysis of industrial robot under loaded conditions and various distances.  - proceeding of international conference on robotics, control and manufacturing technology (rocom `08), world scientific and engineering academy and society (wseas). 

roslinda shamsudin, zainuddin sajuri, syarif junaidi syarifuddin djalil, mariyam jameelah ghazali, muhammad azmi abdul hamid, fathul karim sahrani, mohd zaidi omar, shahrum abdullah, azman jalar.  (2008).  the proceeding of malaysian metallurgical conference 2008.  - the proceeding of malaysian metallurgical conference 2008. 

azami, mohd zaidi, norhamidi, dzuraidah, s.rozaimah, nor aishah, norbahiah, shahrum, amiruddin, ruhaizan, zulkifli, zamri, adi irfan, nuryazmin & haliza.  (2008).  prosiding seminar pendidikan kejuruteraan dan alam bina.  - prosiding seminar pendidikan kejuruteraan dan alam bina (peka 2008). 

nopiah, zm; khairir, mi; abdullah, s.  (2008).  segmentation and scattering of fatigue time series data by kurtosis and root mean square.  - new aspects of signal processing and wavelets. 

rahman, m.m., arrifin, a.k., nor, m.j.m., abdullah, s..  (2008).  fatigue analysis of spot-welded joint for automative structures.  - sdhm structural durability and health monitoring.  4(3):173-180. 

shahrum abdullah, choi jae-chil, john r. yates and joseph a. giacomin.  (2008).  use of strain-life models with wavelet bump extraction (wbe) for predicting fatigue damage.  - jurnal kejuruteraan.  20:33-44. 

m.j. ghazali, c.h. azhari, s. abdullah, m.z. omar.  (2008).  characterisation of natural fibres (sugarcane bagasse) in cement composites.  - international conference of manufacturing engineering and engineering management, world congress on engineering 2008 (wce 2008). 

s. abdullah, m.f.abdullah, a.k.ariffin, z.a. aziz, m.j. ghazali.  (2008).  thermal mechanical analysis of a qfn stacked-die leadframe under reflow process.  - international conference of manufacturing engineering and engineering management, world congress on engineering 2008 (wce 2008). 

mohd zaki nuawi, shahrum abdullah, nordin jamaluddin dan azli arifin.  (2008).  pembangunan algoritma pemprosesan isyarat dinamik pemesinan.  - prosiding seminar pemantauan projek penyelidikan gup 2007. 

s. abdullah, s.m. yusof, a. jalar, m.f. abdullah, z.a. aziz & r. daud.  (2008).  step cut for dicing laminated wafer in a qfn package.  - solid state science and technology.  16(2):198-206. 

a. jalar, h. kamarudin, s. abdullah and mf mod yunoh.  (2008).  computers and simulation in modern science, volume ii.  - Vol II, 20-26. 

s. abdullah, m.f.mod yunoh, a. jalar & h.kamarudin.  (2008).  effects of strain rates on the characterization of 99.99% gold wire: a case study in micro tensile testing.  - proceedings of the 1st wseas international conference on materials science (materials`08). 

mariyam jameelah ghazali, jaharah a. ghani, shahrum abdullah, huda abdullah, mohd zaki nuawi dan mohd hanif md saad.  (2008).  development of low cost technique for wear monitoring of connecting rod bore.  - seminar pemantauan projek penyelidikan gup 2007. 

s. abdullah, z. a. aziz, i. ahmad, m. f. abdullah and m.f. mod yunoh.  (2008).  gold wire neck strength on different combinations of looping parameters.  - solid state science and technology.  16(2): 232-239. 

s. abdullah, m. f. abdullah, a. k. ariffin, m. n. baharin, z. a. aziz and m.f. mod yunoh.  (2008).  comparison in between good and oxidized leadframe: a case study in package delamination analysis.  - solid state science and technology.  16(2):223-231. 

s. abdullah, m.f. abdullah, a.k. ariffin, m.n. baharin, z.a. aziz and m.f. mod yunoh.  (2008).  effect of package delamination under 3-points bending test: a case study using cyclic loading.  - solid state science and technology.  16(2):72-82. 

s abdullah, m loman, n jamaluddin, a arifin, zm nopiah, m. z. nuawi.  (2008).  assessment of fatigue damage features in a piping system using signal processing approach.  - proceedings of the 7th wseas international conference on signal processing, turkey. 

abu bakar mohamad, zahira yaacob, shahrum abullah, mardina abdullah, amiruddin ismail, zuhairuse md. darus, siti kartom kamarudin, baba md deros, badariah bais, zamri chik, muhammad farihan irfan mohd nor, jaharah nordin.  (2008).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-234. 

azami zaharim, amiruddin ismail, shahrum abdullah, ibrahim mohamed, ibrahim ahmad.  (2008).  an evaluation of test statistics for detecting temporary change in bi(1,1,1,1) models.  - the journal pamm.  7(1):203041-2030042. 

amiruddin ismail, shahrum abdullah, azami zaharim and ibrahim ahmad.  (2008).  a model of driver`s lane-changing behaviour at an urban signalised intersection.  - the journal pamm.  7(1):2150029-2150030. 

m.z.omar, n.t. kofli, k. mat, z.m.darus, s.a. osman, m.n.a. rahman, s. abdullah.  (2008).  employers` evaluation on attributes obtained during industrial training.  - proceedings of the 7th wseas international conference on education and educational technology (edu`08). 

m. m. rahman, a. k. ariffin, n. jamaludin, s. abdullah & m. m. nor.  (2008).  finite element based fatigue life prediction of a new free piston engine mounting.  - journal of applied sciences.  8(9):1612-1621. 

s. abdullah, s. mohd yusof, i. ahmad, a. jalar and r. daud.  (2007).  dicing die attach film for 3d stacked die qfn packages.  - proceedings of the 32nd international electronics manufacturing technology symposium (iemt 2007), 3-5 october, 2007, california usa.. 

s.abdullah and d.a.wahab.  (2007).  enhancement of capabilities in design synthesis through the concurrent application of design methodologies.  - journal of engineering and applied sciences.  2(1):248-255. 

shahrum abdullah, m. d. ibrahim and zulkifli mohd nopiah.  (2007).  a study of variable amplitude fatigue loading using the quality control statistical approach.  - regional conference proceedings on engineering mathematics, mechanics, manufacturing & architechure (emarc) 2007. 

s. abdullah and m. z. nuawi.  (2007).  recognising fatigue damaging features in variable amplitude loadings using the s-transform approach.  - journal of engineering and applied sciences.  2(4):753-759. 

s. abdullah, m. d. ibrahim, a. zaharim and i. ahmad.  (2007).  application of moving average approaches in analysing fatigue road loading.  - research journal of applied sciences.  2(5):600-605. 

s. abdullah.  (2007).  the wavelet transform for fatigue history editing: is it applicable for automotive applications?.  - journal of engineering and applied sciences.  2(2):342-349. 

s. abdullah, m. z. nuawi and a. zaharim.  (2007).  application of a computational data editing algorithm to summarise fatigue road loadings.  - proceedings of the 2007 annual conference on international conference on computer engineering and applications. 

m. m. rahman; a. k. ariffin and s. abdullah.  (2007).  finite element based vibration fatigue analysis of a new two-stroke linear generator engine component.  - international journal of mechanical and materials engineering.  2(1):63-74. 

s. abdullah, m. f. abdullah and a. k. ariffin.  (2007).  fatigue test method for observing the delamination effect in a qfn package.  - proceedings of the 9th electronics packaging technology conference, 11-12 december 2007, singapore. 

amiruddin ismail, shahrum abdullah, azami zaharim and ibrahim ahmad.  (2007).  modeling lane-changing behavior based on queue length at an urban signalized intersection.  - international journal of mathematical models and methods in applied sciences.  4(1):294-299. 

m. loman, m.z. nuawi, s. abdullah and n. jamaludin.  (2007).  development of analysis monitoring using ultrasonic signal in turning process.  - regional conference on engineering mathematics, mechanics, manufacturing & architecture (em3arc) 2007 and comfort (nvc2007), 27-28 november 2007, kuala lumpur. 

f. lamin, m. z. nuawi, s. abdullah, c. k. e. nizwan.  (2007).  a study of a machining signal analysis using an alternative filtering approach.  - proceeding of world engineering congress (wec ?07), pulau pinang.. 

a. ismail, a. zaharim, s. abdullah, z. mohd nopiah and f.l. mohd isa.  (2007).  a longitudinal study of first year engineering students` performance at the universiti kebangsaan malaysia: before and after the implementation of the obe approach.  - 4th. wseas/iasme international conference on engineering education (ee`07). issn: 1790-5117, isbn: 978-960-8457-93-5.. 

mohd radzi abu mansor, shahrum abdullah, mohd nizam abd. rahman, mariyam jameelah ghazali.  (2007).  bengkel kecemerlangan budaya ilmu.  - seminar pendidikan kejuruteraan dan alam bina (peka07) -melahirkan modal insan yang cemerlang-. 

nuawi m. z., lamin f., nor m. j. m., jamaluddin n., abdullah s., nizwan c. k. e..  (2007).  integration of i-kaz coefficient and taylor tool life curve for tool wear progression monitoring in machining process.  - international journal of mechanics.  4(1): 44-50. 

amiruddin ismail, shahrum abdullah, azami zaharim , ibrahim ahmad.  (2007).  a lane-changing model based on queue length at an urban signalised intersection..  - 11th. world scientific and engineering academy and society (wseas) international conference on computers science and technology, greece. issn: 1790-5117, isbn: 978-960-8457-92-8.. 

a.k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2007).  probabilistic analysis of cracked structures with uncertainty parameters.  - 7th international conference on fracture & strength of solid, urumiqi china.. 

s. abdullah, m.d. ibrahim and a. zaharim.  (2007).  computational analysis of a nonstationary fatigue data using the arima approaches.  - proceedings of the 11th wseas international conference on computers, agios nikolaos, crete island, greece, july 26-28, 2007. 

ibrahim mohamed, azami zaharim, shahrum abdullah and mohd sahar yahya.  (2007).  an evaluation of test statistics for detecting level change in bl(1,1,1,1) models.  - proceedings of the 11 th wseas international conference on computers. 

a. ismail, a. zaharim, s. abdullah, z. mohd nopiah & f. l. mohd. isa.  (2007).  a longitudinal study of first year engineering students' performance at the universiti kebangsaan malaysia: before and after the implementation of the obe approach.  - proceedings of the 4th iasme/wseas international conference on engineering education. 

s. abdullah and a. k. ariffin.  (2006).  accelerated fatigue tests of bs 080a42 steel using the wbe mission loadings.  - key engineering materials.  326-328:1023-1026. 

s. abdullah, j.c. choi, j.a. giacomin, j.r. yates.  (2006).  bump extraction algorithm for variable amplitude fatigue loadings.  - international journal of fatigue.  28:675-691. 

m.z. omar, n.a. nik mohamed, a. zaharim, s. abdullah, s. m. haris & h. basri.  (2006).  a study of employers satisfaction of engineering graduates in malaysia.  - wseas transactions on advances in engineering education.  6(3):506-510. 

a. zaharim, i. mohamed, i. ahmad, s. abdullah and m.z. omar.  (2006).  performances test statistics for single outlier detection in bilinear (1,1,1,1) models.  - wseas transactions on mathematics.  12(5):1359-1364. 

s. abdullah, j.c. choi, j.a. giacomin , j.r. yates.  (2005).  bump extraction algorithm for variable amplitude fatigue loading.  - international journal of fatigue (ref: mn j 4-11/05.  28:675-691. 

s. abdullah, j.a. giacomin and j.r. yates.  (2004).  a mission synthesis algorithm for fatigue damage analysis.  - proc. of the instn. of mech. engrs, part d, journal of automobile engineering,.  243-258.