wan fathul hakim w zamri, mariyam jameelah ghazali, zambri harun, rizauddin ramli, nuryazmin ahmat zainuri.  (2023).  transformasi rubrik penilaian pembentangan pelajar melalui pengenalan sistem pengesanan emosi.  - persidangan penyelidikan pendidikan kejuruteraan dan alam bina 2023 (peka 2023).  150-153. 

wan fathul hakim w zamri, nuryazmin ahmat zanuri, mariyam jameelah ghazali, wan aizon w ghopa, muhamad faiz md din.  (2023).  sistem ujian pengesanan emosi melalui ekspresi muka sebagai rubrik penilaian alternatif pembentangan pelajar bagi meningkatkan keterampilan peribadi.  - kongres dan pertandingan inovasi dalam pengajaran dan pembelajaran (knovasi) 2023.  1-20. 

afida jemat, masfueh razali, yuichi otsuka, mariyam jameelah ghazali.  (2023).  enhancement of human gingival fibroblasts bioactivity and proliferation on plasma sprayed yttria-stabilised zirconia/tio2 surface coating of titanium alloys: an in-vitro study.  - coatings.  1-13. 

wan fathul hakim w zamri, nuryazmin ahmat zanuri, mariyam jameelah ghazali, wan aizon w ghopa, muhamad faiz md din.  (2023).  sistem ujian pengesanan emosi melalui ekspresi muka sebagai rubrik penilaian alternatif pembentangan pelajar bagi meningkatkan keterampilan peribadi.  - kongres dan pertandingan inovasi dalam pengajaran dan pembelajaran (knovasi) 2023.  4-7. 

dinesh dhande, shirish navale, d.p. gaikwad, d.v. wadkar, s.r. patil, r.d. nalawade, mariyam j. ghazali, w.b. wan nik.  (2023).  prediction of abrasive wear behavior of the poly-tetra-fluoroethylene material using adaptive neuro fuzzy interface systems.  - jurnal tribologi.  141-159. 

alireza doroudi, hamid omidvar, ali dastgheib, mohammad khorram, armin rajabi, amir hossein baghdadi, and mariyam jameelah ghazali.  (2023).  effect of mbf-20 interlayer on the microstructure and corrosion behaviour of inconel 625 super alloy after diffusion brazing.  - materials.  1-18. 

sindhu budati, z. leman, mh sulaiman, ma azmah hanim and mj ghazali.  (2023).  an investigation into the physical, mechanical, tribology, thermal and durability performance of commercial brake material for rail transportation.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1620-1631. 

mariyam jameelah ghazali, haizum aimi zaharin, mohammad khalid, thachnatharen nagarajan.  (2023).  tribological properties and thermal behaviour of ti3c2 mxene as anti-friction and heat transfer additive in outboard engine oil.  - jurnal tribologi.  69-83. 

haizum aimi zaharin, mariyam jameelah ghazali, mohammad khalid, thachnatharen nagarajan, wong weng pin, farah ezzah, ong gerard, rashmi walvekar and abdul khaliq rasheed.  (2023).  tribological, oxidation and thermal analysis of advanced microwave hydrothermal synthesised ti3c2tx mxene as additives in outboard engine oil.  - lubricants.  1-20. 

wan fathul hakim w zamri, nuryazmin ahmat zanuri, mariyam jameelah ghazali, wan aizon w ghopa, muhamad faiz md din.  (2023).  analisis ekspresi muka melalui sistem ujian pengesanan emosi bagi penilaian pembentangan pelajar.  - asean journal of teaching and learning in higher education.  456-468. 

nilofar asim , marzieh badiei, masita mohammad, halim razali , armin rajabi , lim chin haw, mariyam jameelah ghazali.  (2022).  sustainability of heating, ventilation and air-conditioning (hvac) systems in buildings-an overview.  - international journal of environmental research and public health.  1-16. 

nabilah ismail, siti mariana mujad, mohammad fakhratul ridwan zulkifli, vincent onuegbu izionworu, mariyam jameelah ghazali,wan mohd norsani wan nik.  (2022).  a review on application of marine algae as green corrosion inhibitors in acidic medium.  - vietnam journal of chemistry.  409-416. 

yusliza yusuf & mariyam jameelah ghazali.  (2022).  salutan anti kotoran dalam dunia marin.  - .  147. 

yusliza yusuf, mariyam jameelah ghazali, mohd fadzli bin abdollah.  (2022).  self-cleaning plasma sprayed tio2 coatings modified by laser surface texturing process.  - junral tribologi.  39-55. 

noraiham mohamad, jeefferie abd razak, hairul effendy ab maulod, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj. mohd, che husna azhari.  (2022).  mineral-filled polymer composites.  - .  36. 

nabilah ismail, siti mariana mujad, mohammad fakhratul ridwan zulkifli, vincent onuegbu izionworu, mariyam jameelah ghazali, wan mohd norsani wan nik.  (2022).  a review on application of marine algae as green corrosion inhibitors in acid medium.  - vietnam journal of chemistry.  409-416. 

intan fadhlina binti mohamed;ahmad kamal ariffin bin mohd ihsan;mariyam jameelah binti ghazali;abu bakar bin sulong;wan fathul hakim bin w. zamri.  (2022).  extra superplasticity of aa2618 alloy processed by high-pressure torsion.  - .  . 

wan fathul hakim bin w. zamri;mariyam jameelah binti ghazali;mohd faizal bin mat tahir;abdul hadi bin azman;intan fadhlina binti mohamed.  (2022).  sifat mekanik, prestasi dan mod kegagalan salutan berlapis pada gelang omboh.  - .  . 

masfueh binti razali;mariyam jameelah binti ghazali;farinawati binti yazid;nurulhuda binti mohd.  (2022).  innovative three-dimensional (3d) construct of hybrid biomaterial scaffold for bone regeneration: bioengineering of suitable injectable bio-inks for bioprinting technology.  - .  . 

nurulhuda mohd, masfueh razali, mariyam jameelah ghazali, noor hayaty abu kasim.  (2022).  current advances of three-dimensional bioprinting application in dentistry: a scoping review.  - materials.  1-25. 

mior muhammad akmal mior muhammad jamil, akmal azman, masfueh razali, nurulhuda mohd, mariam jameelah ghazali.  (2022).  porosity assessment of hydroxyapatite and hyaluronic acid bone composite in bioink development for 3d-bioprinting.  - research, innovation & entrepreneurship symposium 4.0.  91-95. 

nurulhuda mohd, masfueh razali, mariyam jameelah ghazali, noor hayaty abu kasim.  (2022).  3d-printed hydroxyapatite and tricalcium phosphates-based scaffolds for alveolar bone regeneration in animal models: a scoping review.  - materials.  1-16. 

m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed.  (2022).  microstructure evaluation and mechanical properties of thixoformed al-5.7si-2cu-0.3mg aluminum alloys.  - international journal of metalcasting.  370-384. 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri.  (2022).  wear debris analyses of nimonic 263 under high temperature fretting condition.  - jurnal tribologi.  118-129. 

yusliza yusuf, mariyam jameelah ghazali, jariah mohamad juoi, toibah abd rahim, zaleha mustafa.  (2022).  plasma-sprayed tio2 coatings: hydrophobicity enhanced by zno additions.  - international journal of applied ceramic technology.  2213-2221. 

armin rajabi, peter hodgson, mariyam j. ghazali, zainuddin sajuri, alireza almaslow, hamid ahmad mehrabi, amir hossein baghdadi.  (2022).  challenges and solutions in the synthesis of nano-ticn: a review.  - ceramic international.  8921-8929. 

nilofar asim, mohd sukor suait, marzieh badiei, masita mohammad, md. akhtaruzzaman, armin rajabi, nowshad amin and mariyam jameelah ghazali.  (2022).  perspectives in biopolymer-graphene-based composite application: advances, challenges, and recommendations.  - nanotechnology reviews.  1525-1554. 

isyraf aznam, joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali.  (2021).  electrophoretic deposition of (cu,mn,co)3o4 spinel coating on sus430 ferritic stainless steel: process and performance evaluation for solid oxide fuel cell interconnect applications.  - journal of the european ceramic society.  1360-1373. 

andanastuti muchtar;mariyam jameelah binti ghazali;mahendra rao a/l somalu;lim kean long.  (2021).  inter-diffusion and oxidation behaviour between (cu,mn,co)3o4 spinel coated ferritic stainless steel interconnect and cathode material .  - .  . 

mariyam jameelah ghazali.  (2021).  inovasi sukan berbasikal tingkat kualiti hidup.  - berita harian.  1. 

mariyam jameelah binti ghazali;norhamidi bin muhamad;intan fadhlina binti mohamed.  (2021).  facile in-situ casting technique of fe-tic for industries.  - .  . 

mariyam jameelah binti ghazali;mohammad rasidi bin mohammad rasani;wan fathul hakim bin w. zamri;intan fadhlina binti mohamed;armin rajabi nasirabadi.  (2021).  wear analyses of thermal sprayed tic/crc coated nickel based superalloys in gas turbines..  - .  . 

mir irfan ul haq, ankush raina, mariyam jameelah ghazali, mohd javaid, abid haleem.  (2021).  tribology of polymer and polymer composites for industry 4.0.  - .  22. 

akmal azman, mior muhammad akmal mior muhammad jamil, masfueh razali, nurulhuda mohd, mariyam jameelah ghazali.  (2021).  physical characterisation of injectable bone graft with addition of hydroxyapatite and hyaluronic acid for 3d bioprinting.  - faculty of dentistry ukm research and innovation symposium 3.0.  39. 

akmal azman, mior muhammad akmal mior muhammad jamil, masfueh razali, nurulhuda mohd, mariyam jameelah ghazali.  (2021).  physical characterization of hydroxyapatite-based bio-ink for three dimensional bioprinting.  - 13th national dental students' scientific conference.  84. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar and che h. azhari.  (2021).  highlights on medicine and medical science vol. 18.  - .  21. 

mariyam j. ghazali, xu ren, armin rajabi, wan fathul hakim w. zamr, nadia mohd mustafah and jing ni.  (2021).  finite element analysis of cushioned diabetic footwear using ethylene vinyl acetate polymer.  - polymer.  1-12. 

juyana a. wahab, mariyam jameelah ghazali.  (2021).  kesan tekstur dalam struktur marin.  - .  135. 

sarani zakaria, andanastuti muchtar, aisyah abdul rahman, wan hanna melini wan mohtar, babul airianah othman, norazlin hassim, abdul munir abd. murad,.  (2021).  peraturan-peraturan universiti kebangsaan malaysia (pengajian siswazah) 2021.  - .  57. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, che h. azhari.  (2021).  advanced aspects of engineering research vol. 2.  - .  20. 

noor khairin mohd, yeong shoot kian, nor azowa ibrahim, siti mariam mohd nor, wan md zin wan yunus, mariyam jameelah ghazali, lim wen huei.  (2021).  corrosion inhibition, adsorption and thermodynamic properties of hydrophobic-tailed imines on carbon steel in hydrochloric acid solution: a comparative study.  - journal of adhesion science and technology.  2558-2579. 

yusliza yusuf, mariyam jameelah ghazali, yuichi otsuka, kiyoshi ohnuma, sarita morakul, susumu nakamura, mohd fadzli abdollah.  (2020).  antibacterial properties of laser surface-textured tio2/zno ceramic coatings.  - ceramics international.  3949-3959. 

huda muhamad badri, nor kamaliana khamis, mariyam jameelah ghazali.  (2020).  a framework for developing lot-sizing and scheduling model for multiproduct.  - iop conf. series: materials science and engineering.  01209. 

abdul khaliq rasheed*, mohammad khalid, ariff farhan bin mohd nor, wai yin wong, tuerxun duolikun, varun natu, michel. w. barsoum, bey fen leo, haizum aimi zaharin, mariyam jameelah ghazali.  (2020).  mxene-graphene hybrid nanoflakes as friction modifiers for outboard engine oil.  - iop conf. series: materials science and engineering.  1-11. 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri and armin rajabi.  (2020).  wear characteristics of superalloy and hardface coatings in gas turbine applications - a review.  - metals.  1-14. 

joelle chia wen mah, muhamad isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2020).  cr vaporisation and oxidation behaviour of sus430 stainless steel in the simulated cathodic environment of solid oxide fuel cells.  - malaysian journal of microscopy.  124-132. 

zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  - .  . 

ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri.  (2020).  fretting wear properties of nimonic 263 at elevated temperatures.  - jurnal tribologi.  1-14. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

zahra mahmoudi, seyed hadi tabaian, hamid reza rezaie, farzad mahboubi, mariyam jameelah ghazali.  (2020).  synthesis of ti2alc and ti3alc2 max phases by arc-pvd using tial target in c2h2/ ar gas mixture and subsequent annealing.  - ceramics international.  4968-4975. 

m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed, b. rashid.  (2020).  dry sliding wear behaviour of thixoformed al-5.7si-2cu-0.3 mg alloys at high temperatures using taguchi method.  - wear.  1-12. 

elaine zi fan soh, ohnmar htwe, amaramalar selvi naicker, armin rajabi nasirabadi, mariyam jameelah ghazali, nadia mohd mustafah, irraivan elamvazuthi, brenda saria yuliawiratman, manimalar selvinaicker.  (2020).  stepease diabetic socks: an answer to efficacious indoor foot pressure relief - a prospective study.  - journal of tissue viability.  104-109. 

huda muhamad badri, nor kamaliana khamis, mariyam jameelah ghazali.  (2020).  integration of lot sizing and scheduling models to minimize production cost and time in the automotive industry.  - international journal of industrial optimization.  1-14. 

j. a. wahab, m. j. ghazali and m. n. derman.  (2020).  corrosion resistance of micro-textured surface modified aluminatitania coating.  - iop conf. series: materials science and engineering.  2186-2194. 

siti atiqa al zahra mat darus, mariyam jameelah ghazali, che husna azhari, rozli zulkifli, ahmad adlie shamsuri.  (2020).  mechanical properties of gigantochloa scortechinii bamboo particle reinforced semirigid polyvinyl chloride composites.  - jurnal teknologi.  15-22. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  surface characterisation of ticxn1x coatings processed by cathodic arc physical vapour deposition: xps and xrd analysis.  - surface and interface analysis.  611-617. 

yusliza yusuf, mariyam jameelah ghazali, yuichi otsuka, sarita morakul, susumu nakamura, kiyoshi ohnuma, mohd fadzli bin abdollah.  (2019).  wettability characteristics of laser surface textured plasma sprayed tio2/zno coatings.  - tribology online.  279-284. 

ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  the study on the properties of ticn coatings processed by cathodic arc physical vapour deposition.  - tribology - materials, surfaces & interfaces.  58-66. 

joelle cw mah, isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  electrophoretic deposition of (cu,mn,co)3o4 spinel layer on ferritic stainless steel.  - symposium on fuel cell and hydrogen technology.  1. 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2019).  effect of sintering temperature on the aging resistance and mechanical properties of monolithic zirconia.  - journal of materials research technology.  1092-1101. 

j.c.w mah, i. aznam, a. muchtar, m.r. somalu and m.j. ghazali.  (2019).  cr vaporisation and oxidation behaviour of sus430 stainless steel in the simulated cathodic environment of solid oxide fuel cells.  - 28th scientific conference of the microscopy society malaysia (28th scmsm 2019).  OPS35. 

isyraf aznam, joelle cw mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  influence of suspension stability and process parameter on electrophoretic deposition of (cu,mn,co)3o4 onto sus430 ferritic stainless steel.  - symposium on fuel cell and hydrogen technology 2019.  1. 

dr masfueh bt razali, prof. dr. andanastuti muchtar, prof. dr. mariyam jemilah bt ghazali, prof. madya dr. syarif junaidi bin sjarifuddin djalil.  (2019).  kajian cytotoxic titanium aloi baru pada sel fibroblas gingiva manusia.  - .  1-6. 

yusliza yusuf, mariyam jameelah ghazali, mohd fadzli bin abdollah, yuichi otsuka, susumu nakamura.  (2019).  superhydrophilicity of laser surface textured tio2 coating for self-cleaning surfaces..  - mechanical engineering research day.  1-3. 

isyraf aznam, joelle mah chia wen, andanastuti muchtar, nurul akidah baharuddin, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  kelakuan pengoksidaan keluli tahan karat berferit sus430 dan kesan pemeruapan spesies cr bergas kepada permukaan katod lscf dalam suhu operasi sel fuel oksida pepejal.  - sains malaysiana.  861-869. 

armin rajabi, mariyam jameelah ghazali, ebrahim mahmoudi, amir hossein baghdadi, abdul wahab mohammad, nadia mohd mustafah, htwe ohnmar, amaramalar selvi naicker.  (2019).  synthesis, characterization, and antibacterial activity of ag2o-loaded polyethylene terephthalate fabric via ultrasonic method.  - nanomaterials.  450-462. 

juyana abdul wahab, mariyam jameelah ghazali.  (2019).  erosion resistance of laser textured plasma-sprayed al2o3-13%tio2 coatings on mild steel.  - wear.  2029-2037. 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2019).  review on oxidation behavior and chromium volatilization of fe-cr-based interconnects at high operation temperatures of solid oxide fuel cells.  - journal of advanced research in fluid mechanics and thermal sciences.  148-155. 

muhammad sufiyan amril, noor faeizah amat, yew hsu zenn, andanastuti muchtar, mariyam jameelah ghazali.  (2019).  influences of oral environment on natural enamel and zirconia crown: a short review.  - journal of advanced research in fluid mechanics and thermal sciences.  156-162. 

zainuddin sajuri, wan fathul hakim w zamri, nor kamaliana khamis, mariyam jameelah ghazali, hawa hishamuddin, azhari shamsudeen, farhana mohd foudzi.  (2019).  book of abstracts : apsim 2019.  - 6th international conference on advanced processes and systems in manufacturing.  1-38. 

hasrawati abu hassan, mariyam jameelah ghazali, cevdet meric, che husna azhari.  (2019).  wettability effect of the surface morphologies of musa acuminata leaves.  - bioresources.  8331-8344. 

ahmad afiq pauzi, mariyam jameelah ghazali, salmi mohd yunus, wan fathul hakim w zamri, che husna azhari, shuib husin.  (2019).  wear characteristics of gas turbine fuel nozzle-contacting surface at different contact temperatures.  - jurnal tribologi.  108-122. 

j.c.w mah, i. aznam, a. muchtar, m.r. somalu and m.j. ghazali.  (2019).  effects of citric acid to metal cations ratio in synthesizing (cu,mn,co)3o4 spinel powders.  - 28th scientific conference of the microscopy society malaysia (28th scmsm 2019).  OPS6. 

mariyam jameelah binti ghazali;mohammad rasidi bin mohammad rasani.  (2019).  pembangunan sarung kaki bertekanan teragih untuk pesakit diabetik di malaysia.  - .  . 

shahrir bin abdullah;yusoff bin ali;rozli bin zulkifli;taib iskandar bin mohamad;azli bin arifin;elankovan a/l a sundararajan;mohammad khatim bin hasan;mariyam jameelah binti ghazali;azhari bin shamsudeen.  (2019).  computationally optimised fuel-efficient concept car.  - .  1-8. 

mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;zainuddin bin sajuri;wan aizon bin w ghopa.  (2018).  thixoforming of novel aluminium alloys.  - .  . 

andanastuti muchtar;mariyam jameelah binti ghazali;mahendra rao a/l somalu;edy herianto.  (2018).  feasibility of electrophoretically depositing cu-mco on ferritic stainless steel interconnects.  - .  . 

jumril yunas;burhanuddin bin yeop majlis;mariyam jameelah binti ghazali;dee chang fu.  (2018).  investigation of synthesized nanostructure and superparamagnetic property of calcium ferrite nanoparticles for targeted drug delivery application..  - .  . 

dinesh ragurajan, mohsen golieskardi, meenaloshini satgunam, md enamul hoque, angela min hwei ng, mariyam jameelah ghazali, ahmad kamal ariffin.  (2018).  advanced 3y-tzp bioceramic doped with al2o3 and mno2 particles potentially for biomedical applications: study on mechanical and degradation properties.  - journal of materials research and technology.  . 

a.rajabi, m.j. ghazali, e. mahmoudi, s. azizkhani, n.h. sulaiman, a.w. mohammad, n.m. mustafah, h. ohnmar, a.s. naicker.  (2018).  development and antibacterial application of nanocomposites: effects of molar ratio on ag2o-cuo nanocomposite synthesised via the microwave-assisted route.  - ceramics international.  21591-21598. 

jumril yunas, noor humam sulaiman & mariyam jameelah ghazali.  (2018).  synthesis of calcium ferrite nanoparticles (cafe2o4-nps) using auto-combustion method for targeted drug delivery.  - the 8th international conference on key engineering materials (ickem).  . 

jumril yunas, noor humam sulaiman, and mariyam jameelah ghazali.  (2018).  synthesis of calcium ferrite nanoparticles (cafe2o4-nps) using auto-combustion method for targeted drug delivery.  - key engineering materials.  . 

a. almaslow, m.j. ghazali, c.t. ratnam, r.j. talib, c.h. azhari.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - .  27. 

jumril yunas, noor humam sulaiman & mariyam jameelah ghazali.  (2018).  comparative study of the calcium ferrite nanoparticles (cafe2o4-nps) synthesis process.  - 2018 ieee international conference on semiconductor electronics (icse).  . 

yusliza yusuf, mariyam jameelah ghazali & mohd fadzli bin abdollah.  (2018).  assessing supply chain risk management practices in manufacturing industries in malaysiaadvances in antifouling technology for pipeline systems: a brief review.  - asia international conference on tribology (asiatrib).  . 

a. jemat, m.j. ghazali, m. razali, y. otsuka, a. rajabi,.  (2018).  effects of tio2 on microstructural, mechanical properties and in-vitro bioactivity of plasma sprayed yttria stabilised zirconia coatings for dental application.  - ceramics international.  4271-4281. 

m.a. abdelgnei, m.z. omar and m.j. ghazali.  (2018).  wear properties of thixoformed ai-5.7si-2cu-o.3mg aluminium alloy.  - 15th international conference on semi-solid processing of alloys and composites.  . 

n.h. sulaiman, m.j. ghazali, j. yunas, a. rajabi, b.y. majlis, m. razali.  (2018).  synthesis and characterization of cafe2o4 nanoparticles via co-precipitation and auto-combustion methods.  - ceramic international.  46-50. 

ahmad afiq pauzi, salmi mohd yunus, shuib husin, mariyam jameelah ghazali, wan fathul hakim w zamri.  (2018).  wear characteristics of a combustion liner for power generation gas turbine.  - international journal of materials and product technology.  . 

afida jemat, mariyam jameelah ghazali, masfueh razali, yuichi otsuka.  (2018).  microstructural, surface roughness and wettability of titanium alloy coated by yzp/tio2 for dental application.  - jurnal teknologi.  . 

m. a. abdelgnei, m. z. omar, m. j. ghazali, mohamed a. gebril and m. n. mohammed.  (2018).  dry sliding wear behaviour of rheocast al-5.7si-2cu-0.3mg alloy.  - international journal of engineering & technology.  . 

noor faeizah amat, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali and norziha yahaya.  (2018).  preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing.  - ceramics international.  6409-6416. 

isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali, joelle chia wen mah, nurul akidah baharuddin.  (2018).  interconnect development for solid oxide fuel cell application.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

isyraf aznam, joelle chia wen mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali..  (2018).  a review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells.  - journal of zhejiang university: science a.  . 

noor faeizah amat, shari lawuo raji, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali, norziha yahaya.  (2018).  influence of presintering parameters on the mechanical properties of presintered dental zirconia block.  - international journal of integrated engineering.  . 

joelle c mah, isyraf aznam, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali, nurul akidah baharuddin.  (2018).  electrophoretic deposition in solid oxide fuel cells: a short review.  - international conference on sustainable energy and green technology (segt 2018).  . 

noor faeizah amat, shari lawuo raji, andanastuti muchtar, muhammad sufiyan amril, mariyam jameelah ghazali & norziha yahaya.  (2018).  influence of presintering parameters on the mechanical properties of presintered dental zirconia block.  - international conference on mechanical and manufacturing engineering 2018 (icme 2018).  . 

isyraf aznam, joelle cw mah, andanastuti muchtar, mahendra rao somalu & mariyam jameelah ghazali.  (2018).  review on the oxidation behavior and chromium volatilization of fe-cr based interconnects at high operation temperatures of solid oxide fuel cells.  - international conference on mechanical and manufacturing engineering 2018 (icme 2018).  . 

muhammad sufiyan amril, noor faeizah amat, yew hsu zenn, mariyam jameelah ghazali & andanastuti muchtar.  (2018).  influence of oral ph on natural enamel and zirconia crown: a short review.  - international conference on mechanical and manufacturing engineering 2018 (icme 2018).  . 

kin yuen leong, idayu razali, k.z. ku ahmad, hwai chyuan ong, m.j. ghazali, mohd rosdzimin abdul rahman.  (2018).  thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: an experimental approach.  - international communications in heat and mass transfer.  23-28. 

b rashid, z leman, m jawaid, mj ghazali, mr ishak.  (2017).  effect of treatments on the physical and morphological properties of spf/phenolic composites.  - journal of natural fibers.  1-13. 

bushra rashid, zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali, mohamad ridzwan ishak.  (2017).  influence of treatments on the mechanical and thermal properties of sugar palm fibre reinforced phenolic composites.  - bioresources.  1447-1462. 

nidal w. elshereksi, mariyam jameelah ghazali, andanastuti muchtar, che husna azhari.  (2017).  studies on the effects of titanate and silane coupling agents on the performance of poly (methyl methacrylate)/barium titanate denture base nanocomposites.  - journal of dentistry.  121-132. 

hasrawati abu hassan, mariyam jameelah ghazali, nurfatihah mohamed zainuddin, che husna azhari.  (2017).  kesan lilin ke atas sifat hidrofobik permukaan daun pisang.  - jurnal kejuruteraan.  1-7. 

j. a. wahab,m. j. ghazali, z. sajuri, y. otsuka, m. jayaprakash, s. nakamura, a. f. s. baharin.  (2017).  effects of micro-grooves on tribological behaviour of plasma-sprayed alumina-13%titania coatings.  - ceramic international.  6410-6416. 

m.j. ghazali, a. rajabi, n.m. mustafah, ohnmar htwe, s.u.m. radzwan.  (2017).  stepease tm : towards pressure distribution efficiency.  - invention, innovation & design exposition 2017.  . 

h.a. hassan, m.j. ghazali, c.h. azhari & i.c. gebeshuber.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - .  15. 

a. rajabi & m.j. ghazali.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - .  14. 

hasrawati abu hassan, mariyam jameelah ghazali , che husna azhari and cevdet meric.  (2017).  microstructural effects of banana leaf on adhesion and self cleaning behaviour.  - matec web of conferences - encon 2017.  1-4. 

juyana a wahab mariyam jameelah ghazali and ahmad firdaus shamsul baharin.  (2017).  microstructure and mechanical properties of plasma sprayed al2o3-13%tio2 ceramic coating.  - matec web of conferences- encon 2017.  1-5. 

joelle c.w. mah, andanastuti muchtar, mahendra rao somalu, mariyam j. ghazali.  (2017).  metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques.  - international journal of hydrogen energy.  9219-9229. 

joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali.  (2017).  influences of sintering temperature on the phase transition behavior and electrical properties of sol-gel derived (cu,mn,co)3o4 spinels.  - 6th international conference on fuel cell & hydrogen technology (icfcht2017).  . 

khaled salem alhawari, mohd zaidi omar, mariyam jameelah ghazali, mohd shukor salleh, mohammed naser abdulrazaq.  (2017).  effect of thixoforming on the wear properties of al-si-cu aluminium alloy.  - jurnal teknologi.  . 

noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - .  23. 

b rashid, z leman, m jawaid, mj ghazali, mr ishak, ma abdelgnei.  (2017).  dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique.  - wear.  26-35. 

mariyam jameelah ghazali, che husna azhari, wan ikhlas wan mohtar, sharir izzuan amir.  (2017).  bedil alam melayu.  - sari penyelidikan.  69. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali and norziha yahaya.  (2017).  effect of ph of suspension and mechanical treatment on nanosized zirconia dispersion.  - journal of mechanical engineering.  10-19. 

mohd,n k, mariyam jameelah ghazali, yeong shoot kian, nor azowa ibrahim, wan md zin wan yunus, siti mariam mohd nor, zainab idris.  (2017).  corrosion inhibition of mild steel in hydrochloric acid solution using fatty acid derivatives.  - journal of oil palm research.  97-109. 

mariyam jameelah ghazali, ahmad firdaus shamsul baharin, juyana a wahab, andanastuti muchtar.  (2017).  erosive wear resistance of dimpled ceramic coatings on mild steels.  - industrial lubrication and tribology.  155-159. 

n.h. sulaiman, m.j. ghazali, b.y. majlisb, j. yunas, m. razali.  (2017).  influence of calcination temperatures on structure and magnetic properties of calcium ferrite nanoparticles synthesized via sol-gel method.  - jurnal tribologi.  38-47. 

nidal wanis elshereksi, mariyam jameelah ghazali, andanastuti muchtar & che husna azhari.  (2017).  review of titanate coupling agents and their application for dental composite fabrication.  - dental materials journal.  539-552. 

armin rajabi, mariyam j. ghazali.  (2017).  quantitative analyses of tic nanopowders via mechanical alloying method.  - ceramics international.  14233-14242. 

f. hassan, r. zulkifli, m.j. ghazali, c.h. azhari.  (2017).  flexural properties of kenaf fibre mat reinforced pla composites.  - journal of applied environmental and biological sciences.  30-35. 

faraziah hassan, rozli zulkifli, mariyam jameelah ghazali, che husna azhari.  (2017).  kenaf fiber composite in automotive industry: an overview.  - international journal on advanced science, engineering and information technology.  315-321. 

k.s. alhawari, m.z. omar, m.j. ghazali, m.s. salleh, m.n. mohammed.  (2017).  microstructural evolution during semisolid processing of al-si-cu alloy with different mg contents.  - transactions of nonferrous metals society of china.  1483-1497. 

joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali, jarot raharjo.  (2017).  formation of sol-gel derived (cu,mn,co)3o4 spinel and its electrical properties.  - ceramics international.  7641-7646. 

sh hamdan, wwf chong, j-h ng, mj ghazali, rjk wood.  (2017).  influence of fatty acid methyl ester composition on tribological properties of vegetable oils and duck fat derived biodiesel.  - tribology international.  76-82. 

ky leong, kz ku ahmad, hwai chyuan ong, mj ghazali, azizah baharum.  (2017).  synthesis and thermal conductivity characteristic of hybrid nanofluids: a review.  - renewable & sustainable energy reviews.  868-878. 

bushra rashid, mohammed zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali, mohamad ridzwan ishak.  (2017).  dynamic mechanical analysis of treated and untreated sugar palm fibre-based phenolic composites.  - bioresources.  3448-3462. 

mariyam jameelah ghazali, hasrawati abu hassan, che husna azhari, fatma azura mamat.  (2016).  the bio-adhesion behaviour of banana leaves as soil remover at elevated temperatures.  - tribology online.  264-271. 

mariyam jameelah ghazali, azhari shamsudeen dan mohd huzairi johari.  (2016).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-109. 

nh. sulaiman, mj. ghazali, by. majlis, j. yunas, m. razali.  (2016).  influence of polyvinylalcohol on the size of calcium ferrite nanoparticles synthesized using a sol-gel technique.  - ifmbe proceedings of international conference for innovation in biomedical engineering and life sciences.  198-202. 

aa pauzi, mj ghazali, s mohd yunus, wfhw zamri, ch azhari, s husin.  (2016).  wear characteristics of commercial gas turbine components.  - tribology - materials, surfaces & interfaces.  82-85. 

k. s. alhawari, m. z. omar, m. j. ghazali, m. s. salleh and m. n. mohammed.  (2016).  dry sliding wear behaviour of thixoformed hypoeutectic al-si-cu alloy with different amounts of magnesium.  - composite interfaces.  519-531. 

j. a. wahab, m. j. ghazali, w. m. w. yusoff and z. sajuri.  (2016).  enhancing material performance through laser surface texturing: a review.  - transactions of the imf.  193-198. 

ping chuan siow, jaharah abdul ghani, che hassan che haron, mariyam jameelah ghazali and talib ria jaafar.  (2016).  effect of carbon content in ticxn1
x coating on the adhesivity of carbide cutting tools and machining performance.  - journal of material research.  1880-1884. 

joelle c.w. mah, andanastuti muchtar, mahendra r. somalu, mariyam j. ghazali.  (2016).  formation and thermal decomposition behaviour of solgel derived cu0.2mn1.4co1.4o4 spinels.  - 2nd international sciences, technology and engineering conference (istec 2016), penang, malaysia.  105-106. 

mohd fadzli bin abdollah, noritsugu umehara, mariyam jameelah binti ghazali and mohamed el mansori.  (2016).  introduction-advances and challenges in carbon-based tribomaterials.  - journal of materials research.  1. 

mariyam jameelah ghazali.  (2016).  young persons` world lecture competition 2015 - finale report.  - materials mind.  . 

m.f.b. abdollah, s. kasolang, n.w.m. zulkifli, m.j. ghazali, i.c. gabeshuber & h.h. masjuki.  (2016).  tta-tribology resources for industrial professionals.  - tribology in malaysia : general perspective.  . 

ahmad firdaus shamsul baharin, mariyam jameelah ghazali, juyana a. wahab.  (2016).  laser surface texturing and its contribution to friction and wear reduction: a brief review.  - industrial lubrication and tribology.  57-66. 

m.j. ghazali, s.m. forghani, n. hassanuddin, a. muchtar, a.r.daud.  (2016).  comparative wear study of plasma sprayed tio2 and al2o3-tio2 on mild steels.  - tribology international.  681-686. 

d. ragurajan, m. satgunam, m. golieskardi, a.k. ariffin and m.j. ghazali.  (2016).  effect of air sintering on microstructural and mechanical properties of aluminum oxide / manganese oxide doped y- tzp.  - journal of the australian ceramic society.  128-133. 

k. a. zakaria, s. abdullah & m. j. ghazali.  (2016).  a review of the loading sequence effects on the fatigue life behaviour of metallic materials.  - journal of engineering science and technology review.  189-200. 

mariyam jemeelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman & shahril mohamad.  (2016).  teknologi di alam melayu.  - .  9. 

bushra rashid, zulkiflle leman, mohammad jawaid, mariyam jameelah ghazali and mohamad ridzwan ishak.  (2016).  the mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites.  - international journal of precision engineering and manufacturing.  1001-1008. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, che h. azhari.  (2016).  investigation on the physical properties of denture base resin filled with nano-barium titanate.  - australian journal of basic and applied sciences.  . 

bushra rashid, z. leman, m. jawaid, m. j. ghazali, m. r. ishak.  (2016).  physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment.  - cellulose.  2905-2916. 

k.s. alhawari, m.z. omar, m.j. ghazali, m.s. salleh, m.n. mohammed.  (2015).  evaluation of the microstructure and dry sliding wear behaviour of thixoformed a319 aluminium alloy.  - materials and design.  169-180. 

n.h. sulaimana, m.j. ghazali, b.y. majlis, j. yunas and m. razali.  (2015).  superparamagnetic calcium ferrite nanoparticles synthesized using a simple sol gel method for targeted drug delivery.  - bio-medical materials and engineering.  103-110. 

salina abdul samad, ma hannan, siti kartom kamarudin, mariyam jameelah ghazali, ahmed hussein kamel ahmed nasser elshafie, zulkifli mohd nopiah, sudharshan naidu, abdul halim ismail & roslena md zaini.  (2015).  research bulletin innovate-engineering and built environment (vol 8).  - .  . 

a. rajabi, m.j. ghazali, a.r. daud.  (2015).  effect of second phase morphology on wear resistance of fe-tic composites.  - jurnal tribologi.  1-9. 

mariyam jameelah ghazali, che husna azhari, wan mokhtar wan yusoff, kamarul ariffin kosman & rosdan abdul manan.  (2015).  ensiklopedia kejuruteraan alam melayu.  - .  322. 

p.c. siow, j.a. ghani, r.j. talib, m.j. ghazali, c.h. che haron.  (2015).  characterization using xps and xrd of ti(c,n) coating properties for cutting tool applications.  - interceram: international ceramic review.  287-290. 

andanastuti muchtar, mariyam jameelah binti ghazali, abu bakar bin sulong.  (2015).  translucency and improved fracture toughness of nanocrystalline oxide ceramics by morphology control.  - .  . 

joelle c.w. mah, andanastuti muchtar, mahendra rao somalu, mariyam jameelah ghazali.  (2015).  spinel-coated fe-stainless steel as intermediate temperature solid oxide fuel cell interconnects: a review.  - the 5th international conference on fuel cell and hydrogen technology (icfcht2015).  . 

m.j. ghazali, m. daud, a. muhammad, m.z. omar, c.h. azhari.  (2015).  microstructure analyses of malay keris and its relation to mechanical properties.  - acta physica polonica a.  1358-1362. 

a. jemat, m. j. ghazali, m. razali, and y. otsuka.  (2015).  surface modifications and their effects on titanium dental implants.  - biomed research international.  1-11. 

mariyam jameelah ghazali, esah hamzah.  (2015).  universiti malaya student won the mlc 2015 finals and will represent malaysia in ypwlc2015 in dublin, ireland.  - materials mind.  . 

afida jemat, mariyam jameelah ghazali, masfueh razali and yuichi otsuka.  (2015).  effects of surface treatment on titanium alloys substrate by acid etching for dental implant.  - materials science forum.  347-352. 

karim z., nuawi m.z., ghani j.a., ghazali m.j., abdullah s., mansor n.i.i..  (2015).  sliding wear evaluation of aluminum alloy (7075-t6) on hardened steel (aisi4340) via non-contact technique by i-kaz™ multi-level analysis.  - wear.  99-104. 

al emran ismail, ahmad kamal ariffin, s. abdullah, m.j ghazali and a.l mohd tobi.  (2015).  j-integral prediction for semi-elliptical surface cracks in round bars subjected to torsion moment.  - applied mechanics and materials.  295-299. 

h. m. hajar, m.j. suriani, m.g.m. sabri, m.j. ghazali and w. b. wan nik.  (2015).  corrosion performance of coating thickness in marine environment.  - biosciences biotechnology research asia.  71-76. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

shahrir abdullah, mariyam jameelah ghazali, salmiah kasolang, mohd. fadzli abdollah, aidah jumahat, nik roselina nik roseley, noreffendy tamaldin, nor azmmi masripan, hilmi amiruddin..  (2015).  plain bearing handbook.  - .  . 

mariyam jameelah ghazali.  (2015).  ensiklopedia kejuruteraan alam melayu.  - .  253-257. 

a jemat, mj ghazali, m razali, y otsuka.  (2015).  characterisation of surface modification on titanium alloys for dental implant application.  - malaysian international tribology conference 2015 penang, malaysia.  1-2. 

salmi mohd yunus, mariyam jameelah ghazali, wan fathul hakim w zamrib, ahmad afiq pauzi, shuib husin.  (2015).  characterisations of chromium carbide-based coated combustor liner for gas turbines.  - jurnal teknologi.  33-36. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, che h. azhari.  (2015).  aspects of titanate coupling agents and their application in dental polymer composites: a review.  - advanced materials research.  96-102. 

rajabi a., ghazali m.j., daud a.r..  (2015).  chemical composition, microstructure and sintering temperature modifications on mechanical properties of tic-based cermet : a review.  - materials & design.  95-106. 

kai yuan theng, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2015).  development of translucent zirconia for dental crown applications.  - asian journal of scientific research.  342-350. 

che husna bt. azhari, andanastuti muchtar, mariyam jameelah binti ghazali, dr. mohmad asri abd gani, dr. noraiham binti mohamad.  (2015).  design & development of entrap (ergonomic trauma pack) prototype for specialised sectors.  - rankings and rating of ip.  . 

mariyam jameelah binti ghazali, masfueh binti razali, syarif junaidi bin sjarifuddin djalil, andanastuti muchtar.  (2015).  surface treatment of custom made plasma sprayed zirconia coated titanium alloys for dental implants.  - .  . 

che husna bt. azhari, mariyam jameelah binti ghazali, ude albert uchenna, dzuraidah binti abd. wahab.  (2015).  structure-property, processing, performance, recycle and reuse (rr) of advanced materials..  - properties of zno: sn pro.  . 

mariyam jameelah ghazali, azhari shamsudeen, mohd huzairi johari.  (2015).  jurnal kejuruteraan.  - jurnal kejuruteraan.  109. 

noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali, chin chuin hao.  (2014).  comparison between slip casting and cold isostatic pressing for the fabrication of nanostructured zirconia.  - advanced materials research, trans tech publications, switzerland.  . 

a.j helmisyah, s. abdullah & m.j ghazali.  (2014).  advances in materials processing vol. 3.  - .  Chapter 10 : 212-249. 

afida jemat, mariyam jameelah ghazali, masfueh razali, yuichi otsuka.  (2014).  effects of surface treatment on titanium for dental implants: a review.  - australian journal of basic and applied sciences.  131-133. 

zambri harun, muhammad syafiq, mohd rasidi rasani, shahrum abdullah, rozli zulkifli, wan mohd faizal wan mahmood, mariyam jameelah ghazali, che husna azhari, mohd radzi abu mansor, zulkhairi, ashraf.  (2014).  skin friction coefficient and boundary layer trend on ukm aster i-bond.  - applied mechanics and materials.  450-455. 

nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, and che h. azhari.  (2014).  perspectives for titanium-derived fillers usage on denture base composite construction: a review article.  - advances in materials science and engineering.  1-13. 

che husna azhari, mariyam jameelah ghazali, andanastuti muchtar, mohd zaidi omar.  (2014).  advances in materials processing.  - .  307. 

theng kai yuan, andanastuti muchtar, mohamed aboras, norziha yahaya, mariyam jameelah ghazali.  (2014).  properties and survival rate of all ceramics dental crown: a review.  - applied mechanics and materials, 4th mechanical and manufacturing engineering, trans tech publication, switzerland.  . 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  j-integral evaluation of surface cracks in round bar under mode iii loadings.  - research journal of applied sciences, engineering and technology.  1985 - 1993. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali, norziha yahaya.  (2014).  suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing.  - ceramics international.  40(4):5413-5419. 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2014).  ungkapan kamiran-j retak permukaan pada bar silinder padu kenaan beban ragam i.  - jurnal teknologi (sciences and engineering).  7 - 17. 

che husna bt. azhari, mariyam jameelah binti ghazali.  (2014).  entrap: ergonomic solution for ballistic pretection.  - properties of zno: sn pro.  . 

salina abdul samad, ma hannan, siti kartom kamarudin, mariyam jameelah ghazali, ahmed hussein kamel ahmed nasser elshafie, zulkifli mohd nopiah, sudharshan naidu a/l raman, abdul halim ismail dan roslena binti md zaini.  (2014).  research bulletin innovate-engineering and built environment (vol 7).  - .  1-88. 

theng kai yuan, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2014).  review on the translucency of zirconia (y-tzp) ceramics for dental crown applications.  - australian journal of basic and applied sciences.  252-257. 

k. a zakaria, s. abdullah, m. j. ghazali, m. z. nuawi, s.m. beden & z. m. nopiah.  (2014).  fatigue strain signal behaviour and damage assessment of an engine mount bracket.  - journal of scientific & industrial research.  73(2014):112-116. 

a. rajabi, m.j. ghazali, j. syarif , a.r. daud.  (2014).  development and application of tool wear: a review of the characterization of tic-based cermets with different binders.  - chemical engineering journal.  255: 445-452. 

s.m. forghani, mj ghazali, a. muchtar, a.r. daud.  (2014).  mechanical properties of plasma sprayed nanostructured tio2 coatings on mild steel.  - ceramics international.  40 (2014):7049-7056. 

chin chuin hao, andanastuti muchtar, noor faeizah amat, mariyam jameelah ghazali, norziha yahaya.  (2014).  influence of sintering temperature on the translucency of sintered zirconia by cold isostatic pressing.  - advanced materials research, trans tech publications, switzerland.  . 

r.zulkifli, m.m.mustafa, s.abdullah, w.m.f. w.mahmood, a. ariffin, z. harun, n. jamaluddin, m. j. ghazali, n. saibani, r. ramli, z. z. abidin, f.m. tahir, m. a. m. sobri, a. shamsuddeen, z. m. nopiah.  (2013).  benefits of participating in national and international automotive challenge for ukm engineering students.  - international conference on engineering education (icee) 2013.  . 

m. j. ghazali, a. jemat, z. sajuri, a. k. a. mohd ihsan, j. a. ghani, w. m. f. w. mahmood, t. i. mohamad.  (2013).  taught masters of engineering programme student perceptions on research methodology course in research project.  - international conference on engineering education (icee) 2013.  . 

helmisyah ahmad jalaludin,*, shahrir abdullah, mariyam jameelah ghazali, bulan abdullah, nik rosli abdullah.  (2013).  experimental study of ceramic coated piston crown for compressed natural gas direct injection engines.  - procedia engineering - the malaysian international tribology conference (mitc2013).  . 

helmisyah ahmad jalaludin, shahrir abdullah, mariyam jameelah ghazali, bulan abdullah, nik rosli abdullah.  (2013).  effect of extreme temperatures on coated piston crown for cngdi engine.  - applied mechanics and materials - international conference on advances in mechanical engineering 2013.  . 

salina abdul samad, ma hannan, siti kartom, mariyam jameelah ghazali, ahmed hussein kamel, zulkifli mhd nopiah, sudharshan naidu, abdul halim ismail & roslena md zaini.  (2013).  research bulletin innovate volume 6, 2013.  - research bulletin.  . 

a. almaslow, c.t. ratnam, m.j. ghazali, r.j. talib, c.h. azhari.  (2013).  effects of electron-beam and sulfur crosslinking of epoxidized natural rubber on the friction performance of semimetallic friction materials.  - composites part b: engineering.  54:377-382. 

a. almaslow, m.j. ghazali, r.j. talib, c.t. ratnam, c.h. azhari.  (2013).  effects of epoxidized natural rubber-alumina nanoparticles (enran) composites in semi-metallic brake friction materials.  - wear.  302:1392-1396. 

junaidi syarif, agung iswadi, mariyam jameelah ghazali, zainuddin sajuri, mohd zaidi omar.  (2013).  wear behavior of copper-containing ferritic iron under a dry sliding condition.  - journal of zhejiang university - science a.  14(14):906-914. 

m.j. ghazali, n.i.i. mansor, m.z. nuawi, j.a. ghani.  (2013).  facile wear failure monitoring of commercial bearing alloys using i-kaz method.  - engineering failure analysis.  35:545-553. 

noor faeizah amat, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2013).  effect of sintering temperature on the mechanical properties of nanostructured zirconia fabricated via colloidal processing.  - advanced materials research.  . 

k.a. zakaria, s. abdullah, m.j. ghazali.  (2013).  comparative study of fatigue life behaviour of aa6061 and aa7075 alloys under spectrum loadings.  - materials and design.  49:48-57. 

k.a. zakaria, s. abdullah, m.j. ghazali, c.h. azhari.  (2013).  influence of spectrum loading sequences on fatigue life in a high-temperature environment.  - engineering failure analysis.  30:111-123. 

noor faeizah amat, andanastuti muchtar, norziha yahaya and mariyam jameelah ghazali.  (2013).  effect of dispersant agent amount in colloidal processing of zirconia dental ceramic.  - advanced materials research.  . 

s.m. forghani, m.j. ghazali, a. muchtar, a.r. daud, n.h.n. yusoff, c.h. azhari.  (2013).  effects of plasma spray parameters on tio2-coated mild steel using design of experiment (doe) approach.  - ceramics international.  39(3):3121-3127. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar.  (2013).  effects of powder size and metallic bonding layer on corrosion behaviour of plasma-sprayed al2o3-13% tio2 coated mild steel in fresh tropical seawater.  - ceramics international.  39(3):2527-2533. 

ping chuan siow, jaharah a. ghani, mariyam jameelah ghazali, talib ria jaafar, mohamad asri selamat, che hassan che haron.  (2013).  characterization of ticn and ticn/zrn coatings for cutting tool application.  - ceramics international.  39(4):1293-1298. 

t.i. mohamad, g. khalifa and m.j. ghazali.  (2013).  improved learning experience with a project-embedded thermofluid course: a brief experience at yanbu industrial college mechanical engineering technology department.  - international conference on engineering education (icee) 2013.  . 

anasyida abu seman, abdul razak daud, mariyam jameelah ghazali.  (2013).  wear behaviour of eutectic and hypoeutectic al-si-mg-ce alloys.  - industrial lubrication and tribology.  65(2):135-140. 

a.s. anasyida, h. zuhailawati, a.r. daud, m.j. ghazali.  (2013).  characterisation of phases and lattice parameter in eutectic and hypoeutectic al-si-mg- ce cast alloy.  - advanced materials research, trans tech publications, switzerland..  . 

a.f.a. rasid, t.i. mohamad, m.j. ghazali and w.m.f.w. mahmood.  (2012).  effects of lubricant temperature in a motorized engine.  - world applied sciences journal.  927-930. 

helmisyah a.j., ghazali m.j. and abdullah s..  (2012).  characterisation of thermal barrier coating on piston crown for compressed natural gas direct injection (cngdi) engines.  - asian international journal of science and technology in production and manufacturing engineering.  5(4):73-77. 

noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali.  (2012).  a review of zirconia as a dental restorative material.  - australian journal of basic and applied sciences.  6(12):9-13. 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2012).  wear monitoring of connecting rod bearing via air-borne method analyzed by using i-kaz tm multi level value.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research).  . 

zakaria, k.a., abdullah, s., ghazali, m.j., azhari, c.h..  (2012).  elevated temperature fatigue fracture behaviour of aluminium alloy subjected to spectrum loadings.  - regional conference on automotive research, recar 2011;kuala lumpur (applied mechanics and materials).  . 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali.  (2012).  stress intensity factors for surface cracks in round bar under single and combined loadings.  - meccanica.  47:1141-1156. 

noor faeizah amat, andanastuti muchtar, mariyam jameelah ghazali dan norziha yahaya.  (2012).  kesan agen penyerak dan ph ampaian dalam pemprosesan berkoloid serbuk nano zirkonia.  - jurnal kejuruteraan.  24:15-20. 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a.r. daud, a. muchtar, s.m. forghani.  (2012).  optimization of plasma spray parameters on the mechanical properties of agglomerated al2o3-13%tio2 coated mild steel.  - materials & design.  39:504-508. 

shahrum abdullah, kamarul ariffin zakaria, mariyam jameelah ghazali.  (2012).  observation of the fatigue crack propagation rate of an aluminum alloy specimen under fatigue spectrum loadings.  - materials testing.  54(10):663-673. 

a. e. ismail, a. k. ariffin, s. abdullah & m. j. chazali.  (2012).  stress intensity factors under combined tension and torsion loadings.  - indian journal of engineering & materials sciences.  19:5-16. 

rozli zulkifli, mohd marzuki mustafa, shahrum abdullah, w.m.f. wan mahmood, a. ariffin, z. harun, m. j. ghazali, n. saibani, r. ramli, z.z. abidin, f.m. tahir, m.a. mohd sabri & a. shamsuddeen.  (2012).  persepsi pelajar fakulti kejuruteraan dan alam bina terhadap manfaat menyertai pertandingan automotif peringkat kebangsaan dan antarabangsa.  - kongres pengajaran dan pembelajaran 2012 - seminar pendidikan kejuruteraan dan alam bina 2012.  . 

helmisyah a.j..ghazali m.j., abdullah s..  (2012).  characterisation of thermal barrier coating on piston crown for compressed natural gas direct injection (cngdi) engines.  - proceedings of the 11th global congress on manufacturing and management (gcmm2012).  . 

a. almaslow, m. j. ghazali, r. j. talib, c. t. ratnam, s. m. forghani and c. h. azhari.  (2012).  effects of sulfur vulcaniaztion of epoxidized natural rubber in semi-metallic friction materials on friction performance.  - engineering e-transaction.  7(1):44-47. 

mariyam jameelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman dan shahril mohamad.  (2012).  sains dan teknologi di alam melayu.  - .  153-161. 

herman praktino, mariyam jameelah ghazali, a.r. daud.  (2012).  effects of manganese addition on tensile strength of aa6063 alloy for marine application.  - jurnal teknologi (sciences & engineering).  59(2):87-89. 

h. pratikno, m.j. ghazali, a.r. daud.  (2012).  effects of manganese addition on hardness of aa6063 alloy for wear resistant material applications.  - engineering e-transaction.  7(1):39-43. 

wan nik, w.b., zulkifli, m.f., rosliza, r., ghazali, m.j., khaled, k.f..  (2011).  potential of honey as corrosion inhibitor for aluminium alloy in seawater.  - world applied sciences journal.  . 

j.a. ghani, m. rizal, m.z. nuawi, m.j. ghazali, c.h.c. haron.  (2011).  monitoring online cutting tool wear using low-cost technique and user-friendly gui.  - wear.  271(9-10):2619? 2624. 

a.j. helmisyah, s. abdullah, m.j. ghazali.  (2011).  structure integrity analysis of piston crown against thermal stress for compressed natural gas direct injection engine.  - engineering e-transaction.  6(2):169-174. 

a. e. ismail, a. k. ariffin, s. abdullah. m. j. ghazali and r. daud.  (2011).  j-integral analysis of surface cracks in round bars under bending moments.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials).  . 

a.j. helmisyah, s. abdullah and m.j. ghazali.  (2011).  effect of thermal barrier coating on piston crown for compressed natural gas with direct injection engine.  - 2011 1st international conference on mechanical engineering, icme 2011(applied mechanics and materials); phuket.  . 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali, r. daud.  (2011).  j-integral analysis of surface cracks in round bars under bending moment.  - applied mechanics and materials.  52-54:43-48. 

a.e. ismail, a.k. ariffin, s. abdullah, m.j. ghazali, r. daud, m. abdulrazzaq and a. zulkifli.  (2011).  j-integral analysis of surface cracks in round bars under tension loadings.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket (applied mechanics and materials).  . 

z. karim, m.z. nuawi, j.a. ghani, s. abdullah and m.j. ghazali.  (2011).  optimization of integrated kurtosis-based algorithm for z-filter (i-kaz ) tm coefficient using multi level signal decomposition technique.  - world applied sciences journal.  14 (10): 1541-1548. 

a. e. ismail, a. k. ariffin, s. abdullah and m. j. ghazali.  (2011).  off-set crack propagation analysis under mixed mode loadings.  - international journal of automotive technology.  12(2):225-232. 

ismail, a.e., ariffin, a.k., abdullah, s., ghazali, m.j..  (2011).  probabilistic assessments of the plate using monte carlo simulation.  - conference on advanced materials and nanotechnology, caman 2009 (iop conference series: materials science and engineering); kuala lumpur.  . 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j., abdulrazzaq m..  (2011).  finite element analysis on the stress intensity factor under combined bending and torsion loading.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur (key engineering materials).  . 

ismail a.e., ariffin a.k., abdullah s., ghazali m.j..  (2011).  probabilistic high cycle multiaxial fatigue analysis using finite element method.  - transactions hong kong institution of engineers.  18(2):13-18. 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali and r. daud.  (2011).  mode iii stress intensity factors of surface crack in round bars.  - 2011 international conference on key engineering materials, ickem 2011; sanya(advanced materials research).  . 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali and r. daud.  (2011).  j-integral analysis of surface cracks in round bars under combined loadings.  - 2011 international conference on key engineering materials, ickem 2011; sanya (advanced materials research).  . 

k.a.zakaria, s. abdullah, m.j. ghazali, m.z.nuawi, m.m.padzi.  (2011).  fatigue damage assessment of the engine mount bracket using a statistical based approach.  - 2nd international conference on manufacturing science and engineering, icmse 2011; guilin (advanced materials research).  . 

shahrir abdullah, azli arifin, lim fang yau, behrang daryakanari, lukeman yusoff, mohd aizat ahmad tarmizi, azhari shamsudeen, rozli zulkifli, taib iskandar mohamad, elankovan a. sundararajan, mohamad.  (2011).  numerical analysis of aerodynamic and underhood thermal management for a fuel-efficient vehicle.  - proceedings of computationally optimised fuel-effiecient concept car: volume iv (cofec) ukm.  . 

m.n. wahab, m.j. ghazali and a.r. daud.  (2011).  effect of aluminum nitride (aln) addition on wear and mechanical properties of al-si alloy composites fabricated by stir casting process.  - source: fracture and strength of solids vii, pts 1 and 2 book series: key engineering materials.  . 

m.j. ghazali, s.e. mat kamal and s. abdullah.  (2011).  characterisations of cu-based coated al7075 via plasma-spray technique.  - 8th international conference on fracture and strength of solids 2010, feofs2010; kuala lumpur(fracture and strength of solids vii, pts 1 and 2).  . 

a. almaslow, m. j. ghazali, r. j. talib, c. t. ratnam and c. h. azhari and s. m. forghani.  (2011).  effects of vulcanization in semi-metallic friction materials on friction performance.  - regional tribology conference.  . 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan mohd and
che husna azhari.  (2011).  investigation on impact fracture of epoxidized natural rubber-alumina nanoparticles composites (enran).  - global engineers and technologies review.  1(2):26-34. 

a.f.a. rasid, m.j. ghazali, t.i. mohamad & w.m.f.w. mahmood.  (2011).  pressure behaviour of lubricant oil during engine operation.  - regional tribology conference 2011.  . 

i. agung, j. syarif, m.j. ghazali, z. sajuri.  (2011).  effect of cu particles precipitation on wear behaviour of fe-3mass%cu under dry sliding condition.  - key engineering materials.  . 

halina misran, ramesh singh, mariyam jameelah ghazali.  (2011).  palm oil based fatty alcholos templated mesoporous silica and silica spheres.  - international journal of nanoscience.  10(6):1275-1281. 

m. j. ghazali.  (2011).  effects of dry sliding wear of wrought al-alloys on mechanical mixed layers (mml).  - .  13/12. 

m. j. ghazali, s. e. mat kamal, s. abdullah and h. misran.  (2011).  characterizations of cu-based coated al7075 via plasma-spray method - a wear case study.  - international journal of nanoscience.  10(6):1269-1274. 

n. hassanuddin, m.j. ghazali, a. muchtar, m.c. isa and a.r. daud.  (2011).  effects of al2o3-13%tio2 coating particle size on commercial mild steel via plasma spray method.  - 8th international conference on composite science and technology, iccst8 (key engineering materials); kuala lumpur.  . 

s.e. mat kamal, m.j. ghazali and s. abdullah.  (2011).  effect of plasma spray variables on cu-ni coated a7075.  - feofs2010 - 8th international conference on fracture and strength of solids 2010 (key engineering materials) ; kuala lumpur.  . 

mahamad noor wahab, mariyam jameelah ghazali, abdul razak daud.  (2011).  effect of aging treatment on microstructure and mechanical properties of al-si matrix alloy reinforced with high purity aluminium nitride (ain).  - source: fracture and strength of solids vii, pts 1 and 2 book series: key engineering materials.  . 

a.j. helmisyah, s. abdullah, m.j. ghazali.  (2011).  structure integrity analysis of piston crown against thermal stress for compressed natural gas direct injection engine.  - regional tribology conference 2011.  . 

n.h.n. yusoff, m.j. ghazali, m.c. isa, a. muchtar, s. m. forghani.  (2011).  effect of particle size and bonding layer on plasma sprayed al 2o 3-13%tio 2 coatings.  - international journal of mechanical and materials engineering.  6(3):385-390. 

n. hassanuddin, m. j. ghazali, a. muchtar, m. c. isa & a. r. daud.  (2010).  effects of al2o3-13%tio2 coating particle size on commercial mild steel via plasma spray method.  - 8th international conference on fracture & strength of solids 2010.  . 

m.n. wahab, a.r. daud & m.j. ghazali.  (2010).  wear and mechanical properties of al-si alloy with aluminum nitride (aln) addition.  - proceedings of 8th international conference on fracture & strengths of solids 2010, 7-9 jun 2010, kuala lumpur..  . 

k.a. zakaria, s. abdullah & m. j. ghazali.  (2010).  the study of fatigue crack propagation in metal using finite element analysis.  - proceedings of 8th international conference on fracture & solids 2010, kuala lumpur (key engineering materials).  . 

i. agung, j. syarif, m.j. ghazali & z. sajuri.  (2010).  effect of cu particles precipitation on wear behaviour of fe-3wt% cu under dry sliding condition.  - proc. of 8th international conference on fracture & strength of solids 2010, kuala lumpur.  . 

n. i. i. mansor, m. j. ghazali and m. z. nuawi.  (2010).  an investigation of sliding wear bearing using airborne technique.  - 3rd regional conference on noise, vibration and comfort (nvc ) 2010.  . 

maryam jameelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman, shahril mohamad.  (2010).  kajian awal ke atas bilah keris melayu - suatu pandangan saintifik.  - prosiding persidangan antarabangsa sains dan teknologi di alam melayu (salam 1) : perkembangan sains dan teknologi di alam melayu, institut alam dan tamadun melayu ukm.  . 

k. a. zakaria, s. abdullah, m. j. ghazali and m. b. ali.  (2010).  effects of fatigue strain signals on fatigue damages of the engine mount barckets.  - regional engineering postgraduate (epc) 2010, hotel equatorial bangi, malaysia.  . 

a. iswadi, s. junaidi, and m. j. ghazali.  (2010).  copper bearing steel for tribological application: effect of copper particles on wear behaviour.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

h. a. jalaludin, s. abdullah and m. j. ghazali.  (2010).  structural and thermal analysis of piston crown for compressed natural gas direct injection engine.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

a. e. ismail, a. k. ariffin, s. abdullah, m. j. ghazali dan z. ahmad.  (2010).  analisis kamiran-j pada bar yang mengandungi retak permukaan kenaan momen lentur.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

andanastuti muchtar, mariyam jameelah ghazali.  (2010).  book of abstract 2010: 8th international conference on fracture and strength of solids.  - .  . 

h. pratikno, m. j. ghazali, a. r. b. daud.  (2010).  kesan rawatan haba larutan ke atas sifat-sifat mekanikal aloi aluminium 6063 untuk bahan badan kapal.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

a.e.ismal, a.k.ariffin, s.abdullah dan m.j.ghazali.  (2010).  stress intensity factors for surface cracks in round bars under combined bending and torsion loadings.  - international review of mechanical engineering (ireme).  4(7):827-832. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj. mohd and che husna azhari.  (2010).  correlation of filler loading and silane coupling agent on the physical characteristics of epoxidized natural rubber-alumina nanoparticles composites.  - journal of elastomers and plastics.  . 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hassan che haron, mariyam jameelah ghazali, and mohd nizam ab rahman.  (2010).  online cutting tool wear monitoring using i-kaz method and new regression model.  - advanced materials research.  . 

mariyam jameelah ghazali, mahamad noor wahab, abdul razak daud and jaharah ab. ghani.  (2010).  effect of aged ain reinforced al-si alloys on dry sliding wear behaviour.  - advanced materials research.  . 

h.a. jalaludin, m.j. ghazali, and s. abdullah.  (2010).  thermal analysis of piston crown for compressed natural gas direct injection engine.  - the 2nd national conference in mechanical engineering research and postgraduate studies (ncmer 2010), kuantan, pahang, faculty of mechanical engineering, ump.  . 

anasyida abu seman, abdul razak daud and mariyam jameelah ghazali.  (2010).  tensile and wear properties of eutectic al-si-mg-ce alloy.  - solid state science and technology.  18(1):231-237. 

anasyida a.s., daud a.r., ghazali m.j..  (2010).  dry sliding wear behaviour of al-12si-4mg alloy with cerium addition.  - materials and design.  31(1):365-374. 

mohamad, n; muchtar, a; ghazali, mj; mohd, dhj; azhari, ch.  (2010).  epoxidized natural rubber-alumina nanoparticle composites: optimization of mixer parameters via response surface methodology.  - journal of applied polymer science.  115(1):183-189. 

helmisyah ahmad jalaludin, mariyam jameelah ghazali, and shahrir abdullah.  (2010).  thermal analysis of piston crown for compressed natural gas direct injection engine and the use of thermal barrier coating against extreme temperature.  - international conference on science & technology: applications in industry & education (2010), penang.  . 

n. h. yusoff, m. j. ghazali, m. c. isa, a. r. daud, a. muchtar, and s. forghani.  (2010).  characterisations of al2o3-13% wt tio2 deposition on mild steel via plasma spray method.  - american institute of physics.  . 

halina misran, a. m. aminuddin, f. a. m. zini, m. j. ghazali, and s. ramesh.  (2010).  facile synthesis and characterizations of mof-5 coordination polymer with various metal linker ratios for ammonia gas storage.  - american institute of physics -international conference on advanced in materials on processing and technologies (ampt2010).  . 

a.e ismail, a.k ariffin, s. abdullah, m.j ghazali.  (2009).  numerical modeling of surface cracks under combined loadings.  - seminar on engineering mathematics 2009 (emas`09).  . 

a. alfan, m.z. omar, j. syarif and m.j. ghazali.  (2009).  vanadis 4 steel behaviour in semi solid zone prior to thixoforming process.  - 4th international conference on recent advances in materials, minerals & environment 2009 and 2nd asian symposium on materials and processing 2009.  . 

h. budiman, m. z. omar1, a. jalar, j. syarif, m. j. ghazali and s. abdullah.  (2009).  production of feedstock material for semi-solid material processing by coolign slope casting process.  - international journal of mechanical and materials engineering (ijmme).  4(2):74-78. 

mariyam jameelah ghazali.  (2009).  advances in materials processing vol 2.  - .  35-70. 

mj ghazali, mz nuawi, nii mansor.  (2009).  low cost wear monitoring of bearing shell in connecting rod via i-kaz method.  - advanced materials research.  76-78:702-707. 

herman pratikno, ahmad kamal ariffin and mariyam jameelah ghazali.  (2009).  influence of injection dc current and seawater salinity to performance several anodes on impressed current cathodic protection (iccp) in marine environment.  - international journal of material science.  4(3):177-189. 

a. s. anasyida, a. r. daud and m. j. ghazali.  (2009).  dry sliding wear behaviour of al-4si-4mg alloys by addition of cerium.  - international journal of mechanical and materials engineering (ijmme).  4(2):127-130. 

n. i. i. mansor, m. j. ghazali, m. z. nuawi and s. e. m. kamal.  (2009).  monitoring bearing condition using airborne sound.  - international journal on mechanical and materials engineering.  4(2):152-155. 

s. h. salleh, m. z. omar, j. syarif, m. j. ghazali, s. abdullah and z. sajuri.  (2009).  investigation of microstructures and properties of 440c martensitic stainless steel.  - international journal of mechanical and materials engineering.  49(2):21-24. 

m. n. wahab, a. r. daud and m. j. ghazali.  (2009).  preparation and characterization of stir cast-aluminum nitride reinforced aluminum metal matrix composites.  - international journal of mechanical and materials engineering.  4(2):115-117. 

k.m. adel, a.s. dhia and m.j. ghazali.  (2009).  the effect of laser surface hardening on the wear and friction characteristics of acicular bainitic ductile iron.  - international journal of mechanical and materials engineering (ijmme).  4(2):167-171. 

m. j. ghazali, m. z. nuawi, n. i. i. mansor.  (2009).  low cost wear monitoring of bearing shell in connecting rod via i-kaz method.  - 12th international symposium on advances in abrasive technology.  . 

m.j. ghazali, a. muchtar, t.i. mohamad, w.a.w. ghopa, w.f.h.w. zamri, m.f.m. tahir, m.a.m. sabri, h. hishamuddin, z. wahid, n.k. khamis.  (2009).  annual report 08 department of mechanical & materials engineering.  - .  75. 

a. alfan, m.z. omar, j. syarif and m.j. ghazali.  (2009).  xw-42 tool steel behavior in semi solid zone.  - international engineering convention, damascus, syria, 11-14 may 2009.  . 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

m. j. ghazali, a. a. pauzi, c. h. azhari, j. a. ghani, a. b. sulong and r. mustafa.  (2009).  effect of starch binders in alumina coatings on aisi 316 l stainless steel for medical application.  - international journal of modern physics b.  23(6-7):1034-1039. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj mohd, che husna azhari.  (2009).  epoxidised natural rubber - alumina nanoparticles composites (enran): effect of filler loading.  - research bulletin.  2: 17-18. 

rozli zulkifli, che husna azhari, maryam j. ghazali, ahmad rasdan ismail, abu bakar sulong.  (2009).  interlaminar fracture toughness of multi-layer woven silk/epoxy composites treated with coupling agent.  - european journal of scientific research.  27(3):454-462. 

mj ghazali, mz omar & a jalar.  (2009).  sains dan teknologi alam melayu.  - .  384. 

n.mohamad, a. muchtar, m. j. ghazali, dahlan h.m., c.h. azhari.  (2009).  the effects of filler loading and 3-aminopropyltriethoxysilane in epoxidised natural rubber-alumina nanoparticles composites (enran).  - 4th international conference on recent advances in materials, minerals environment and 2nd asian symposium on material and processing, penang. malaysia.  . 

omar m.z., atkinson h.v., howe a.a., palmiere e.j., kapranos p., ghazali m.j..  (2009).  solid-liquid structural break-up in m2 tool steel for semi-solid metal processing.  - journal of materials science.  44(3):869-874. 

nik hassanuddin nik yusoff, mariyam jameelah ghazali, andanastuti muchtar,mahdi che isa.  (2009).  effect of the plasma spray power on microstructure and property of plumina titania coatings..  - engineering postgraduate conference 2009 (epc 2009).  . 

m.j. ghazali.  (2009).  effect of slider materials on the nano-characteristics of the mechanically mixed layer of worn wrought al-alloys.  - jurnal nanosains & nanoteknologi.  2(1):32-37. 

che husna azhari, andanastuti muchtar, mohd zaidi omar, mariyam jameelah ghazali.  (2009).  advances in materials processing volume 2.  - .  340. 

n. mohamad, a. muchtar, m.j. ghazali, h.m. dahlan and c.h. azhari.  (2009).  epoxidised natural rubber - alumina nanoparticle composites (enran): effect of filler loading on the tensile properties.  - solid state science and technology.  17(2):133-143. 

m.z. omar, a. alfan, j. syarif, s. abdullah, m.j. ghazali and z. sajuri.  (2008).  modelling of steels in semi solid zones prior to thixoforming process.  - indonesian nanoletter.  2(3):41-48. 

m.z. omar, a. alfan, j. syarif, z. sajuri, s. abdullah, m.j. ghazali.  (2008).  modelling of xw-42 steel for semi-solid processing.  - computers and simulation in modern science.  2:39-44. 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj mohd, che husna azhari.  (2008).  the cure characteristics of epoxidised natural rubber-alumina nanoparticles composites (enran).  - engineering postgraduate conference 2008, ukm.  . 

mariyam jameelah ghazali, baba md deros, badariah bais, dzuraidah abd wahab, fatihah suja`, huda abdullah, jamaliah md jahim.  (2008).  proceedings of engineering postgraduate conference 2008.  - .  74. 

s. abdullah, m.f.abdullah, a.k.ariffin, z.a. aziz, m.j. ghazali.  (2008).  thermal mechanical analysis of a qfn stacked-die leadframe under reflow process.  - international conference of manufacturing engineering and engineering management, world congress on engineering 2008 (wce 2008).  . 

jaharah a. g., liang c. g., siti zaleha w., che hassan c.h., m.j. ghazali, m.z.omar and b.m.deros.  (2008).  the ewr of graphite and copper electrodes in electrical discharge machining (edm) of aisi h13 harden steel.  - proceedings of international conference on mechanical & manufacturing engineering (icme2008),.  . 

a. k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2008).  probabilistic analysis of cracked structures with uncertainty parameters.  - advanced materials research.  33-37(1):223-228. 

m.j. ghazali, w.m. rainforth, m.z. omar.  (2008).  a comparative study of mechanically mixed layers (mmls) characteristics of commercial aluminium alloys sliding against alumina and steel sliders.  - journal of materials processing technology.  201(1-3):662-668. 

m.j. ghazali, w.m. rainforth, s. abdullah, a.k.a. ihsan & m. hassan.  (2008).  subsurface deformation of worn al-cu and al-mg alloys.  - advanced materials research.  33-37:483-488. 

m.j. ghazali, m.z. nuawi, n.i.i. mansor, f. lamin.  (2008).  wear characterisation of connectong rod bore using i-kaz & taylor tool life curve methods.  - the 1st wseas international conference on materials science 2008.  . 

m.j. ghazali , c.h. azhari , s. abdullah & m.z. omar.  (2008).  characterisation of natural fibers (sugarcane bagasse) in cement composites.  - wce.  1307-1309. 

jaharah a.g., che hassan, ghazali m.j.,md.deros b., m.z. nuawi, m.z..  (2008).  performance of uncoated carbide tool when machining cast iron in dry condition.  - 5 th international conference on advanced mateerial and processing, harbin, china, 2-5 sep 2008.  . 

mariyam jameelah ghazali, jaharah a. ghani, shahrum abdullah, huda abdullah, mohd zaki nuawi dan mohd hanif md saad.  (2008).  development of low cost technique for wear monitoring of connecting rod bore.  - seminar pemantauan projek penyelidikan gup 2007.  . 

n.c. hau, m.j. ghazali, d. mohd., c.h. azhari.  (2008).  effects of electron beam irradiation doses on sugar cane bagasse fiber reinforced cement composites.  - malaysian journal of microscopy.  4:226-231. 

ghazali, mj; nuawi, mz; mansor, nii; lamin, f.  (2008).  wear characterisation of connecting rod bore bearing shell using i-kaz and taylor tool life curve methods.  - proceedings of the 1st wseas international conference on materials science (materials`08) - recent advances in materials science.  . 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj mohd, che husna azhari.  (2008).  the effect of filler on epoxidised natural rubber-alumina nanoparticles composites.  - european journal of scientific research.  24(4):538-547. 

prof. madya dr.jaharah a. ghani, dr.mohd zaki nuawi, prof. dr. che hassan che haron, dr.mariyam jameelah ghazali.  (2008).  non-contact on-line monitoring and measurement of cutting tool wear development during milling operation.  - seminar pemantauan projek penyelidikan (gup) 2007.  . 

roslinda shamsudin, zainuddin sajuri, syarif junaidi syarifuddin djalil, mariyam jameelah ghazali, muhammad azmi abdul hamid, fathul karim sahrani, mohd zaidi omar, shahrum abdullah, azman jalar.  (2008).  the proceeding of malaysian metallurgical conference 2008.  - the proceeding of malaysian metallurgical conference 2008.  . 

a.b. sulong, n. muhamad, m.j. ghazali and a.g. jaharah, soon huat tan, j.h. park.  (2008).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - the fifth international conference on advanced materials and processing, harbin, china.  . 

noraiham mohamad, andanastuti muchtar, mariyam jameelah ghazali, che husna azhari, dahlan hj mohd.  (2008).  epoxidised natural rubber - alumina nanoparticle composites: optimisation of mixer parameters using factorial design.  - national seminar on engineering & technopreneurship (nset) 2008, kuala lumpur.  . 

m.j. ghazali.  (2008).  wear trends in commercial wrought aluminium alloys.  - indonesian nanoletter.  3:61-69. 

m.j. ghazali, c.h. azhari, s. abdullah, m.z. omar.  (2008).  characterisation of natural fibres (sugarcane bagasse) in cement composites.  - international conference of manufacturing engineering and engineering management, world congress on engineering 2008 (wce 2008).  . 

prof. dr che hassan che haron, prof. dr husna azhari, prof. ir. dr wan ramli wan daud, dr mariyam jameelah ghazali.  (2008).  teknologi roda air melayu untuk pengairan.  - seminar pemantauan projek penyelidikan (gup) 2007.  . 

mohd radzi abu mansor, shahrum abdullah, mohd nizam abd. rahman, mariyam jameelah ghazali.  (2007).  bengkel kecemerlangan budaya ilmu.  - seminar pendidikan kejuruteraan dan alam bina (peka07) -melahirkan modal insan yang cemerlang-.  . 

r. fadhila, a.g. jaharah, m.z. omar, c.h.c. haron, m.j. ghazali, and c. h. azhari.  (2007).  austenite formation of steel-3401 subjected to rapid cooling process.  - int. j of mech and material.  2(2):150-153. 

m.j. ghazali, j.a. ghani, m.z. omar.  (2007).  plastic deformation characteristics of worn precipitation-hardened aluminium alloys.  - international journal of mechanical & materials engineering.  2(2):125-129. 

a.k. ariffin, m. r. m. akramin, s. huzni, s. abdullah and m. j. ghazali.  (2007).  probabilistic analysis of cracked structures with uncertainty parameters.  - 7th international conference on fracture & strength of solid, urumiqi china..  . 

andanastuti muchtar, amiruddin ismail, hafizah husain, jamaliah md jahim, mariyam jameelah ghazali dan muhammad farihin irfan mohd nor.  (2007).  prosiding seminar penyelidikan siswazah 2007.  - seminar penyelidikan siswazah 2007.  . 

a.g. jaharah,c.h. che haron, m.z. omar and m.j. ghazali.  (2007).  wear mechanism and failure mode of p10 tin coated carbide tools.  - int. j. precision technology.  1(1):115-122. 

m.j. ghazali, w.m. rainforth, h. jones.  (2007).  the wear of wrought aluminium alloys under dry sliding conditions.  - tribology international.  40(2): 160-169. 

andanastuti muchtar, mariyam jameelah ghazali, ahmad kamal ariffin mohd. ihsan.  (2006).  pandangan pelajar: isu bahasa pengantar, waktu kuliah dan pengajaran pensyarah.  - seminar pengajaran dan pembelajaran berkesan 2006, esset, bangi.  . 

mariam jameelah ghazali.  (2006).  wear characteristics of several commercial wrought alloys against tool steel.  - jurnal kejuruteraan.  Jilid 18, 2006. 

mariyam jameelah ghazali, andanastuti muchtar, jaharah a. ghani.  (2006).  perbandingan prestasi akademik pelajar tahun dua dan tiga dalam mengikuti kursus pengukuran dan instrumentasi pada tahun yang sama..  - seminar pengajaran dan pembelaran berkesan 2006, esset, bangi.  . 

m.j. ghazali, w.m. rainforth, h. jones.  (2005).  dry sliding wear behaviour of some wrought, rapidly solidified powder metallurgy aluminium alloys.  - wear.  .