abu bakar bin sulong;norhamidi bin muhamad;mohd. zaidi bin omar;zainuddin bin sajuri;nabilah afiqah binti mohd radzuan;mohd ikram bin ramli.  (2023).  mechanism in processability of copper-aluminium-manganese shape memory alloys (smas) through powder injection moulding (pim).  - .  . 

mohd. zaidi bin omar;abu bakar bin sulong;zainuddin bin sajuri;intan fadhlina binti mohamed.  (2023).  mechanical properties and microstructural evolution of thixoformed graphene nanosheets reinforced aluminium alloy matrix composites.  - .  . 

mohd nur ikhmal salehmin, muhammad farhan hil me, wan ramli wan daud, nazlina haiza mohd yasin, mimi hani abu bakar, abu bakar sulong, swee su lim.  (2023).  construction of microbial electrodialysis cells equipped with internal proton migration pathways: enhancement of wastewater treatment, desalination, and hydrogen production.  - science of the total environment.  1-13. 

prof. ir. dr. abu bakar sulong, rohazaini hasan, prof. dr. mohd talib latif, prof. madya dr. hamidun bunawan, prof. madya dr. azlan abas, dr. ahmad aldrie amir, dr. mohamad taha ijab, dr. umi azmah hasran, mohammad shafiq bin rahmat, mohd syukri ismail.  (2023).  impak: kluster penyelidikan sumber lestari, alam sekitar dan kehidupan pintar.  - impak: kluster penyelidikan sumber lestari, alam sekitar dan kehidupan pintar.  1-52. 

nisa naima khalida, nabilah afiqah radzuana,b*, abu bakar sulonga,b, farhana mohd foudzia & ariffuddin hasrana.  (2023).  rheological test of flowability and diffusion behavior of carbon fibre reinforced polyamide.  - jurnal kejuruteraan.  215-222. 

j mogan, w. s. w. harun, k. kadirgama, d. ramasamy, f. m. foudzi, a. b. sulong, f. tarlochan and f. ahmad.  (2023).  fused deposition modelling of polymer composite: a progress.  - polymers.  1-28. 

al basir, norhamidi muhamad, abu bakar sulong, nashrah hani jamadon, farhana mohd foudzi.  (2023).  recent advances in processing of titanium and titanium alloys through metal injection molding for biomedical applications: 2013-2022.  - materials.  1-33. 

abu bakar bin sulong;rosiah binti rohani;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan.  (2023).  radiation-induced grafting of electrospun nanofiber based functionalized natural rubber for membrane application.  - .  . 

nurul nadiah mahmud, abu bakar sulong, kei ameyama.  (2023).  powder injection moulded ti6al4v-ha composite for implants.  - sains malaysiana.  1557-1565. 

norazyan rudi hartono, nabilah afiqah mohd radzuan, nisa naima khalid, abu bakar sulong,.  (2023).  3d printed carbon fibre reinforced polyamides in high temperature.  - jurnal kejuruteraan.  1351-1361. 

nurul syazwani sahari, nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, nishata royan a/p rajendran royan.  (2023).  rheology properties in composite filament making.  - 8th international conference on fuel cell & hydrogen technology 3rd symposium on fuel cell and hydrogen technology 2023 (icfcht sfcht 2023).  05. 

norazyan rudi hartono, nabilah afiqah mohd radzuan, abu bakar sulong.  (2023).  carbon fibre reinforced polyamides in high-temperature via 3d printing.  - malaysia polymer international conference 2023.  20. 

nurato.nurato, edy herianto majlan, wan ramli wan daud, teuku husaini , masli irwan rosli, abu bakar sulong, mohd shahbudin mastar, darwin sebayang.  (2023).  static stress analysis of membrane electrode assembly (mea) and gasket in proton exchange membrane fuel cell stack assembly pressure.  - jurnal kejuruteraan (journal of engineering).  223-230. 

h. hanizam, m. s. salleh, z. marjom, m. z. omar, a. b. sulong, s. a. sundi, h. boejang, a. h. abdul rasib.  (2023).  effect of heat treatment cycles on tensile performance and microstructural evolution of thixoformed mwcnt-a356 composite.  - journal of engineering science and technology.  1323-1338. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

al basir, norhamidi muhamad, abu bakar sulong, muhammad bin mohamed amin, nashrah hani jamadon, nabilah afiqah mohd radzuan.  (2023).  micro-injection molding and debinding behavior of hydroxyapatite/zirconia bi-materials fabricated by two-component micro powder injection molding process.  - materials.  1-18. 

nabilah afiqah mohd radzuan, nisa naima khalid, farhana mohd foudzi, nishata royan rajendran royan and abu bakar sulong.  (2023).  mechanical analysis of 3d printed polyamide composites under different filler loadings.  - polymers.  1-11. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

nisa naima khalid, fatin zahidah awang adi, nabilah afiqah mohd radzuan & abu bakar sulong.  (2023).  shear test characterization of 3d printed polyamide reinforced carbon fiber composites.  - jurnal kejuruteraan.  431-436. 

mohd rhafiq mazlan, nashrah hani jamadon, armin rajabi, abu bakar sulong, intan fadhlina mohamed, farazila yusof, nur ayuni jamal.  (2023).  necking mechanism under various sintering process parameters - a review.  - journal of materials research and technology - jmr&t.  2189-2201. 

md ahsanul haque, md mahbubur rahman, faridul islam, abu bakar sulong, loh kee shyuan, ros emilia rosli , ashok kumar chakraborty, julfikar haider.  (2023).  kinetics of oxygen reduction reaction of polymer-coated mwcnt-supported pt-based electrocatalysts for high-temperature pem fuel cell.  - energies.  1-18. 

zaliha wahid, nabilah afiqah mohd radzuan, nurhasyimah abd aziz, afifah zakiyyah juri , abu bakar sulong.  (2023).  on mechanical performance of 3d printed wood mimic materials.  - 7th powder metallurgy and advanced processes & systems in manufacturing 2023 (pm7&apsim2023).  1-9. 

nurul syazwani sahari, nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong.  (2023).  rheology properties in polyamide reinforced carbon fibre composite.  - international conferences on powder metallurgy and advanced processes & systems in manufacturing (pm7 & apsim2023).  1-3. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, david hui.  (2022).  adhesion behaviour of 3d printed polyamide carbon fibre composite filament.  - reviews on advanced materials science.  838-848. 

aditya reza haswendra, amir arifin, abu bakar sulong, norhamidi mohamad, gunawan and barlin.  (2022).  human-centered technology for a better tomorrow.  - human engineering symposium, humens 2021 (lecture notes in mechanical engineering).  289-297. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2022).  sintering behavior of bi-material micro-component of 17-4ph stainless steel and ysintering behavior of bi-material micro-component of 17-4ph stainless steel and yttria-stabilized zirconia produced by.  - materials.  1-13. 

hendra suherman, radwan dweiri, abu bakar sulong, mohd yusuf zakaria, yovial mahyoedin.  (2022).  improvement of the electrical-mechanical performance of epoxy/graphite composites based on the effects of particle size and curing conditions.  - polymers.  1-14. 

qian wen yeang, abu bakar sulong, soon huat tan.  (2022).  electrospun carboxyl-functionalised multi-walled carbon nanotube/poly(vinyl alcohol) asymmetric pervaporation membrane: application and modeling.  - journal of applied polymer science.  1-19. 

hedaiat moradpoor, hossein mohammadi, mohsen safaei, hamid reza mozaffari, roohollah sharifi, pourya gorji, abu bakar sulong, norhamidi muhamad, mona ebadi.  (2022).  recent advances on bacterial cellulose-based wound management: promises and challenges.  - international journal of polymer science.  1-24. 

nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad.  (2022).  layup sequence and interfacial bonding of additively manufactured polymeric composite.  - 6th postgraduate colloquium for environmental research 2022 (pocer 2022).  16-17. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2022).  prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu: suatu ulasan ringkas.  - sains malaysiana.  1545-1556. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd zamzuri ahmad shukri.  (2022).  reinforced composite as a feeder for 3d printing application.  - jurnal kejuruteraan.  671-678. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mihirssen gunasegran.  (2022).  simulation analysis of graphene addition on polymeric composite.  - jurnal kejuruteraan.  941-947. 

mohd nur ikhmal salehmin, teuku husaini, jonathan goh, abu bakar sulong.  (2022).  high-pressure pem water electrolyser: a review on challenges and mitigation strategies towards green and low-cost hydrogen production.  - energy conversion and management.  1-28. 

norhamidi bin muhamad;mohd. zaidi bin omar;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi.  (2022).  effect of metal-ceramic (bi-material) on inter-surface bonding by micro co-powder injection molding.  - .  . 

nashrah hani binti jamadon;abu bakar bin sulong;mohd hamdi bin abd shukor.  (2022).  potential use of copper-phosphorus based filler for joining porous metal to copper alloy via brazing process.  - .  . 

nor yuliana binti yuhana;sahrim bin hj. ahmad;abu bakar bin sulong;nur hidayatul nazirah binti kamarudin.  (2022).  the role and mechanism of non-reactive organics acids as recycled e-waste particles surface modifier .  - .  . 

umi azmah binti hasran;mohd. ambar bin yarmo;masli irwan bin rosli;abu bakar bin sulong;t. husaini.  (2022).  pencirian dan ketersauran sel fuel mikro berprestasi tinggi sebagai sumber kuasa bersih untuk pesaudara tanpa pemandu (uav) di ruang udara malaysia.  - .  . 

intan fadhlina binti mohamed;ahmad kamal ariffin bin mohd ihsan;mariyam jameelah binti ghazali;abu bakar bin sulong;wan fathul hakim bin w. zamri.  (2022).  extra superplasticity of aa2618 alloy processed by high-pressure torsion.  - .  . 

farhana binti mohd foudzi;norhamidi bin muhamad;abu bakar bin sulong.  (2022).  effect of heat treatment on the performance of additive manufactured titanium alloy via selective laser melting.  - .  . 

kean long lim, kee shyuan loh, sofiah md auzair, abu bakar sulong.  (2022).  potential of hydrogen in green steel technology.  - 2022 seaisi steel mega event & expo.  31. 

norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  - .  . 

abu bakar sulong, norfilza mohd mokhtar, mohamad nasir sahfiee, yap wei boon, caryn chan mei hsein, mohd kaisan mahadi, mohamad aimanuddin mohtar.  (2022).  impak: kluster kesihatan & perubatan termaju.  - impak: kluster kesihatan & perubatan termaju.  1-44. 

n.n. khalid, n.a.m. radzuan,a.b. sulong, f.m. foudzi.  (2022).  adhesion behaviour of 3d printed polymer composites.  - composite sciences and technology international conference 2022 (comsat2022).  4-5. 

wei lin ng, lei zhou, abu bakar sulong, eng-poh ng & soon huat tan.  (2022).  modification of the commercial polyester filter media support with electrospun polyethylene terephthalate fibers and its application for air purification.  - science and technology for the built environment.  928-943. 

abu bakar sulong, angela ng min hwei ng, muhammad azmi abdul hamid.  (2021).  metal-ceramic composite: a new generation material for medical implant.  - .  135. 

mohd yusuf zakaria, mohd ikram ramli, abu bakar sulong, norhamidi muhamad, muhammad hussain ismail.  (2021).  application of sodium chloride as space holder for powder injection molding of alloy titanium - hydroxyapatite composites.  - journal of materials research and technology.  478-486. 

lohashenpahan shanmuganantha , azmi baharudin , abu bakar sulong , roslinda shamsudin and min hwei ng.  (2021).  prospect of metal ceramic (titanium-wollastonite) composite as permanent bone implants: a narrative review.  - materials.  1-24. 

nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibon, abu bakar sulong and che hassan che haron.  (2021).  kenaf reinforced polypropylene composites: a numerical simulation.  - aip conference proceedings / 4th international sciences, technology & engineering conference (istec) 2020.  1-9. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and farhana mohd foudzi.  (2021).  a review on bonding of polyamide reinforced carbon fibre via additive manufacturing.  - iop conf. series: materials science and engineering.  1-6. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

nabilah afiqah mohd. radzuan, abu bakar sulong, mohd. yusuf zakaria.  (2021).  komposit polimer pengalir revolusi teknologi pembuatan.  - .  218. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and mohammad ashraf mohammad amin.  (2021).  3d printed polyamide-carbon fibre composites filament.  - 8th international conference on solid state science and technology (8th icssst 2021).  117. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong.  (2021).  seramik nano: revolusi produk mikro.  - .  173. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, wan sharuzi wan harun, mohannad saleh hammadi al-furjan.  (2021).  effect of energy density on properties of additive manufactured ti6al4v via slm.  - international conference on powder metallurgy and particulate materials (powdermet2021).  434-448. 

nabilah afiqah mohd radzuan*, abu bakar sulong.  (2021).  adhesion behavior of 3d printed polyamide-carbon fibre composites filament.  - symposium on fuel cell and hydrogen technology 2021 (sfcht2021).  71. 

abu bakar bin sulong;che hassan bin che haron;norhamidi bin muhamad;nabilah afiqah binti mohd radzuan.  (2021).  kesan penambahan bahan nano terhadap ketahanan mekanikal dan fizikal kenaf polimer komposit bagi aplikasi automotif.  - .  . 

nor yuliana binti yuhana;abu bakar bin sulong.  (2021).  penambahbaikan sifat mudah dibiodegradasi, ketahanan haba, mekanikal dan rintangan pelarut bahan poliuretena sebagai alat pencuci paip industri.  - .  . 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, ukwueze bonaventure emeka.  (2021).  process parameters used in macro/micro powder injection molding: an overview.  - metals and materials international.  2023-2045. 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong, nabilah afiqah mohd radzuan, mohd ramdhan mohd khalid, mohd rizal ahmad, mohd ikmal hafizi azaman, ahmad syazwan ramli, mohd azwan mohd bakri.  (2021).  problems and constraints involved in the injection moulding process of biocomposites: a review.  - advances in agricultural and food research journal.  1-14. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2021).  feedstock properties and debinding mechanism of yttria-stabilized zirconia/ stainless steel 17-4ph micro-components fabricated via two-component micro-powder injection molding process.  - ceramics international.  20476-20485. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2021).  conductive polymer composites using 3d printing for electronic devices: a review.  - international conference on manufacturing engineering technology (iconmet).  94. 

nabilah afiqah mohd radzuan, abu bakar sulong, iswandi.  (2021).  effect of multi-sized graphite filler on the mechanical properties and electrical conductivity.  - sains malaysiana.  2025-2034. 

hossein mohammadi, norhamidi muhamad, abu bakar sulong, mohsen ahmadipour.  (2021).  recent advances on biofunctionalization of metallic substrate using ceramic coating: how far are we from clinically stable implant?.  - journal of the taiwan institute of chemical engineers.  254-270. 

shabbah begum, nor yuliana yuhana, noorashikin md saleh, nur hidayatul nazirah kamarudin, abu bakar sulong.  (2021).  review of chitosan composite as a heavy metal adsorbent: material preparation and properties.  - carbohydrate polymers.  1-9. 

hossein mohammadi, mohammad majid sepantafar, norhamidi muhamad, abu bakar sulong.  (2021).  how does scaffold porosity conduct bone tissue regeneration?.  - advanced engineering materials.  1-19. 

m.ahsanul haque. abu bakar sulong, l.kee shyuan, e.herianto majlan, t. husaini, r.emilia rosli.  (2021).  synthesis of polymer/mwcnt nanocomposite catalyst supporting materials for high-temperature pem fuel cells.  - international journal of hydrogen energy.  4339-4353. 

nurul nadiah mahmud, abu bakar sulong, bhupendra sharma and kei ameyama.  (2021).  presintered titanium-hydroxyapatite composite fabricated via pim route.  - metals.  1-10. 

nurul nadiah mahmud, farah atiqah abdul azam, mohd ikram ramli, farhana mohd foudzi, kei ameyama, abu bakar sulong.  (2021).  rheological properties of irregular-shaped titanium-hydroxyapatite bimodal powder composite moulded by powder injection moulding.  - journal of materials research and technology.  2255-2264. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong & kok yih shia.  (2021).  production of porous stainless steel using the space holder method.  - sains malaysiana.  507-514. 

derrick cheah seet leong, nabilah afiqah mohd radzuan, abu bakar sulong.  (2020).  effect of carbon nanotubes addition on the mechanical properties of kenaf/carbon nanotube/polypropylene composite.  - proceedings of the 4th international symposium on advanced materials and nanotechnology 2020.  259-264. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, najlaa nazihah masood, etta eshak.  (2020).  moldability of nano size zirconia for powder injection molding process by using peg and pmma binders.  - jurnal kejuruteraan.  335-340. 

tant koon tatt, norhamidi muhamad, che hassan che haron, abu bakar sulong.  (2020).  parametric optimization of metal injection moulding process using taguchi method.  - the international journal of integrated engineering.  210-219. 

mohd ikram ramli, farhana mohd foudzi, abu bakar sulong, fatin aqilah abdul yazid, norhamidi muhamad, david hui.  (2020).  characterization of titanium alloy-hydroxyapatite composite through powder injection molding.  - jurnal kejuruteraan.  177-184. 

norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  - .  . 

zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;andanastuti muchtar;roslinda binti shamsudin;ng min hwei.  (2020).  tajuk program: metal-ceramic composite: a new generation material for bone implant tajuk projek: effect of processing parameters on novel metal-ceramic composite through powder injection molding.  - .  . 

roslinda binti shamsudin;muhammad azmi bin abdul hamid;zalita binti zainuddin;abu bakar bin sulong;ng min hwei.  (2020).  tajuk program: metal-ceramic composite: a new generation material for bone implant tajuk projek: a study on the role and mechanism of argentum and superparamagnetic material in the prperties of wolla.  - .  . 

h. hanizam, m.s. salleh, m.z. omar, a.b. sulong, m.a.m. arif.  (2020).  effects of hybrid processing on microstructural and mechanical properties of thixoformed aluminum matrix composite.  - journal of alloys and compounds.  1-12. 

nashrah hani jamadon, nurul izaan abdullah halid, abu bakar sulong, mohd hamdi abd shukor, yukio miyashita.  (2020).  evaluation of sintered hydroxyapatite (ha) via powder injection molding.  - jurnal kejuruteraan.  671-676. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, intan fadhlina mohameda & mohannad saleh hammadi al-furjan.  (2020).  debinding process of co-powder injection molded (2c-pim) ss17-4ph and ss316l.  - jurnal kejuruteraan.  49-53. 

nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibo, abu bakar sulong, che hassan che haron.  (2020).  numerical simulation analysis of kenaf reinforced polypropylene composites.  - international science, technology and engineering conference, (istec 2020).  15-17. 

nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd yusuf zakaria and mohd ikram ramli.  (2020).  study on the influence mechanism of sintering hydroxyapatite (ha).  - journal of ceramic processing research.  662-666. 

nur fawwaz asri, teuku husaini, abu bakar sulong, edy herianto majlan.  (2020).  effects of the synthesis coating parameters for metal bipolar plates.  - sains malaysiana.  1-20. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

nur fawwaz asria, teuku husaini, abu bakar sulong, edy herianto majlan, wan ramli wan daud.  (2020).  single stack performance using chromium carbide and niobium carbide coated on 316 l bipolar plates.  - jurnal kejuruteraan.  33-39. 

majid niaz akhtar, sumbal javed, mukhtar ahmad, abu bakar sulong, muhammad azhar khand.  (2020).  sol gel derived mnti doped co2 w-type hexagonal ferrites: structural, physical, spectral and magnetic evaluations.  - ceramics international.  7842-7849. 

al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad.  (2020).  bi-material micro-part of stainless steel and zirconia by two-component micro-powder injection molding: rheological properties and solvent debinding behavior.  - metals.  1-17. 

farah atiqah abdul azam, nishata royan rajendran royan, nor yuliana yuhana, nabilah afiqah mohd radzuan, sahrim ahmad and abu bakar sulong.  (2020).  fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties.  - polymers.  1-14. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

youping gong, fei wang, m. s. h. al furjan, lijun shan, jingyang he, xiangjuan bian,zhikai bi, haiqiang liu, wenxin li, huifeng shao, guojin chen and abu bakar sulong 4.  (2020).  experimental investigation and optimal 3d bioprinting parameters of sa gel porous cartilage scaffold.  - applied sciences.  1-22. 

nor kamaliana khamis, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad, mohd faizal mat tahir.  (2020).  perbandingan kompetensi dalam akademik dan prestasi dalam projek berkumpulan: satu kajian kes.  - k-novasi 2020.  1-13. 

nor kamaliana khamis, mohd faizal mat tahir, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad.  (2020).  teori dan inovasi pengajaran dan pembelajaran: menyusuri pandemik covid-19.  - .  10. 

farah 'atiqah abdul azam, zakaria razak, mohd khairul fadzly md radzi, norhamidi muhammad, che hassan che haron, and abu bakar sulong.  (2020).  influence of multiwalled carbon nanotubes on the rheological behavior and physical properties of kenaf fiber reinforced polypropylene composites.  - polymers.  1-13. 

t. husaini;masli irwan bin rosli;abu bakar bin sulong;edy herianto.  (2019).  plat dwikutub ketumpatan kuasa tinggi untuk sel fuel dan sel elektrolisis.  - .  . 

norhamidi bin muhamad;abu bakar bin sulong;zaliha binti wahid.  (2019).  advanced copper/graphene composite for thermal management application using a sustainable powder injection moulding process.  - .  . 

masli irwan bin rosli;wan ramli bin wan daud;mohd shahbudin bin mastar @ masdar;abu bakar bin sulong;nur tantiyani binti ali othman;t. husaini.  (2019).  the investigation of fluid behaviour effects in high temperature proton exchange membrane fuel cell.  - .  1-5. 

md ahsanul haque, abu bakar sulong, edy herianto majlan, kee shyuan loh, teuku husaini, rosemilia rosli.  (2019).  oxygen reduction reaction behaviours of carbon nanotubes supporting pt catalyst for proton exchange membrane fuel cell.  - malaysian journal of analytical sciences.  147-154. 

m. a. haque, a. b. sulong, e. h. majlan, k. s. loh, t. husaini, r. rosli.  (2019).  physiochemical characteristics of solid electrolyte membranes for high-temperature pem fuel cell.  - international journal of electrochemical science.  . 

iswandi, abu bakar sulong, teuku husaini.  (2019).  effects of graphite/polypropylene on the electrical conductivity of manufactured bipolar plate.  - malaysian journal of analytical sciences.  355-361. 

nurato, edy herianto majlan, wan ramli wan daud, teuku husaini, masli irwan rosli, abu bakar sulong, darwin sebayang.  (2019).  finite element analysis for stress distribution in a proton exchange membrane fuel cell stack.  - international journal of integrated engineering.  233-240. 

nur fawwaz asri, teuku husaini, abu bakar sulong, edy herianto majlan, wan ramli wan daud, bushroa abdul razak, nabilah afiqah mohd radzuan.  (2019).  chromium carbonitride (crcn) coatings on sus 316l with potential application as bipolar plate in pemfc.  - international journal of engineering & technology.  . 

abu bakar bin sulong;masli irwan bin rosli;edy herianto;t. husaini.  (2019).  reka bentuk dan pengujian prestasi sel tunggal sel fuel membran elektrolit polimer suhu tinggi (ht-pemfc).  - .  1-8. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, farrahshaida mohd salleh.  (2019).  the study of sintering behavior of stainless steel 17-4ph-stainless steel 316l for two materials powders injection molding (2c-pim) process.  - journal of mechanical engineering.  67-77. 

lijun shan, abdul amir h. kadhum, m.s.h. al-furjan, wenjian weng, youping gong, kui cheng, maoying zhou, lingqing dong, guojin chen, mohd s. takriff, abu bakar sulong.  (2019).  in situ controlled surface microstructure of 3d printed ti alloy to promote its osteointegration.  - materials.  1-13. 

lohashenpahan shanmuganantha 1 , roslinda shamsudin 3 ,abu bakar sulong 2 ,min hwei ng.  (2019).  titanium wollastonite: an implant for the future of tissue engineering.  - termsympo 2019.  1. 

h. hanizam, m.s. salleh, m.z. omar, a.b. sulong.  (2019).  effects of mechanical stirring and short heat treatment on thixoformed of carbon nanotube aluminium alloy composite.  - journal of alloys and compounds.  83-90. 

rosli, r.e., sulong, a.b., daud, w.r.w., zulkifley, m.a., rosli, m.i., majlan, e.h., haque, m.a. & radzuan n.a.m..  (2019).  the design and development of an ht-pemfc test cell and test station.  - international journal of hydrogen energy.  30763-30771. 

nabilah afiqah mohd radzuan, abu bakar sulong, teuku husaini, edy herianto majlan, masli irwan rosli, muhammad firdaus aman.  (2019).  fabrication of multi-filler mcf/mwcnt/sg-based bipolar plates.  - ceramics international.  . 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, muhammad rafi raza, mohd ikram ramli.  (2019).  incorporation of wollastonite bioactive ceramic with titanium for medical applications: an overview.  - materials science & engineering c.  . 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairul fadzly md radzi, nur farhani ismail, dulina tholibon, izdihar tharazi.  (2019).  effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites.  - composites part b: engineering.  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu, ahmad tajuddin abdullah, teuku husaini, ros emilia rosli, edy herianto majlan, masli irwan rosli.  (2019).  fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on pem fuel cell bipolar plate.  - international journal of hydrogen energy.  30618-30626. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

hashim hanizam, mohd shukor salleh, mohd zaidi omar, abu bakar sulong.  (2019).  optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through taguchi method.  - journal of materials research and technology-jmr&t.  2223-2231. 

nabilah afiqah mohd radzuan , abu bakar sulong, david hui and anil verma.  (2019).  electrical conductivity performance of predicted modified fibre contact model for multi-filler polymer composite.  - polymers.  1-12. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, seong jin park.  (2019).  processing of stainless steel (ss316l)-hydroxyapatite (ha) powder composite through powder injection molding.  - iop conference series: journal of physics: conference series.  1-6. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2019).  effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process.  - ceramics international.  11648-11653. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad, mohd ikram ramli.  (2019).  rheological properties of titanium-hydroxyapatite with powder space holder composite feedstock for powder injection moulding.  - international journal of advanced manufacturing technology.  2591-2599. 

dulina tholibon, izdihar tharazi, abu bakar sulong, norhamidi muhamad, nur farhani ismail, mohd khairul fadzly md radzi ,nabilah afiqah mohd radzuan, david hui.  (2019).  kenaf fiber composites: a review on synthetic and biodegradable polymer matrix.  - jurnal kejuruteraan.  65-76. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2019).  influence the filler orientation on the performance of bipolar plate.  - sains malaysiana.  669-676. 

zakaria razak, abu bakar sulong, norhamidi muhamad, che hassan che haron, mohd khairol fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2018).  the effects of maleic anhydride grafted pp (mapp) on the mechanical properties of injection moulded kenaf/cnts/pp composites.  - sains malaysiana.  . 

nor nabilla kadiman, julie elvyana romli, norhamidi muhamad, abu bakar sulong & farhana mohd foudzi.  (2018).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  . 

radwan dweiri, hendra suherman, abu bakar sulong and jafar f. al-sharab.  (2018).  structure-property-processing investigation of electrically conductive polypropylene nanocomposites.  - science and engineering of composite materials.  . 

a a abdullah, h norita, h n azlina, a b sulong, n n masood.  (2018).  preparation of ss316l mim feedstock with biopolymer as a binder.  - iop conference series: materials science and engineering.  . 

hendra suherman, abu bakar sulong, mohd yusuf zakaria, nishata royan, and jaafar sahari.  (2018).  electrical conductivity and physical changes of functionalized carbon nanotube/graphite/stainless steel (ss316l)/polypropylene composites immersed in an acidic solution.  - songklanakarin journal of science and technology.  . 

zakaria razak , abu bakar sulong, norhamidi muhamad, mohd. khairul fadzly md radzi, nur farhani ismail, dulina tholibon and izdihar tharazi.  (2018).  numerical simulation analysis of wood/pp composites for injection-moulded car battery trays.  - international journal of engineering and technology(uae).  . 

nabilah afiqah mohd radzuan, abu bakar sulong & mahendra rao somalu.  (2018).  extrusion process of polypropylene composites reinforced milled carbon fibre for conductive polymer composite application.  - 4th engineering science and technology international conference (estic 2018), matec web of conferences.  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu, teuku husaini, edy herianto majlan & masli irwan rosli.  (2018).  carbon fibre reinforced polypropylene: an electrical conductivity model.  - key engineering materials (volume 791).  . 

andanastuti muchtar;abu bakar bin sulong;syarif junaidi bin sjarifuddin djalil;mahendra rao a/l somalu;edy herianto.  (2018).  development of screen-printed ni-sdcc composite anode thin film for micro-solid oxide fuel cell.  - .  . 

majid niaz akhtar, a.b. sulong, m.n. akhtar, muhammad azhar khan.  (2018).  systematic study of ce3þ on the structural and magnetic properties of cu nanosized ferrites for potential applications.  - journal of rare earths.  156-164. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  microstructure and physical and mechanical properties of micro cemented carbide injection.  - powder technology.  151-158. 

mohd hazizul hamzah, nor yuliana yuhana , abu bakar sulong.  (2018).  the effect of ultrasonic treatment on water absorption of epoxy/kenaf core fiber composite.  - international journal of engineering and technology.  . 

che hassan bin che haron;ja`afar bin sahari @ shaari;che husna bt. azhari;norhamidi bin muhamad;jaharah bt. a ghani;abu bakar bin sulong.  (2018).  machinability and moldability of high strenght kenaf polymer matrix composites.  - .  . 

abu bakar bin sulong;norhamidi bin muhamad;andanastuti muchtar;syarif junaidi bin sjarifuddin djalil.  (2018).  powder co-injection molding (2c-pim) of hybrid metal-ceramic powders.  - .  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu,hendra suherman.  (2018).  electrical conductivity models of die configuration for polypropylene-reinforced milled carbon fibre.  - journal of advanced manufacturing technology.  . 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong.  (2018).  investigation on feedstock preparation for micro-cemented carbide injection molding.  - powder metallurgy progress.  96-102. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2018).  pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit.  - sains malaysiana.  . 

abu bakar sulong.  (2018).  two component powder injection molding (2c-pim) of stainless steel (ss17-4ph) and yttria stabilised zirconia (3ysz).  - majalah innovate.  27-28. 

majid niaz akhtar, abu bakar sulong, a. umer, ammar bin yousaf, muhammad azhar khan.  (2018).  multi-component mwcnt/ng/ep-based bipolar plates with enhanced mechanical and electrical characteristics fabricated by compression moulding.  - ceramics international.  . 

abu bakar sulong.  (2018).  unidirectional kenaf fiber reinforced polyactic-acid composites for automotive interior component application.  - majalah innovate.  25-26. 

najla nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  121-125. 

najla nazihah mas'ood, farhana mohd foudzi, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farrahshaida mohd salleh, ukwueze bonaventure emeka.  (2018).  two component materials in powder metallurgy: a review paper focused on the processing technique applied in powder metallurgy.  - jurnal kejuruteraan.  23-31. 

majid jafarzadehghoushji, r. alebrahim, rozli zulkifli, abu bakar sulong, shahrum abdullah, che husna azhari.  (2018).  crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application.  - iranian polymer journal.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

ukwueze, bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2018).  solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia.  - international journal of mechanical & mechatronics engineering.  . 

n.f. ismail, n. muhamad, a.b. sulong & c.h.c. haron.  (2018).  effects of alkali treatment on mechanical properties of epoxy composites reinforced kenaf fibre using compression moulding process.  - international journal of mechanical & mechatronics engineering.  . 

qian wen yean, abu bakar sulong, soon huat tan.  (2018).  asymmetric membrane containing electrospun cu-btc/poly(vinyl alcohol) for pervaporation dehydration of 1,4-dioxane.  - separation and purification technology.  . 

nabilah afiqah mohd radzuan, abu bakar sulong , mahendra rao somalu , edy herianto majlan, teuku husaini and masli irwan rosli.  (2018).  effects of die configuration on the electrical conductivity of polypropylene reinforced milled carbon fibers: an application on a bipolar plate.  - polymers.  . 

abu bakar sulong.  (2018).  komposit logam-seramik: bahan generasi baru untuk implan perubatan.  - impak oktober 2018.  . 

zambri harun, wan fathul hakim wan zamri, abu bakar sulong dan zainuddin sajuri.  (2018).  implementation of cornerstone courses in order to enhance complex problem solving attributes.  - prosiding peka 2017. k-novasi pengajaran dan pembelajaran ukm 2018: pendidikan 4.0: graduan kalis masa depan.  . 

najlaa nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi , mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite.  - plos one.  . 

nor nabilla kadiman, muhammad omar abdul rashid, norhamidi muhamad dan abu bakar sulong.  (2018).  effects of sintering temperature on the physical and mechanical properties of injection-molded copper/graphene composite.  - journal of advanced manufacturing technology.  . 

nabilah afiqah mohd radzuan, mohd yusuf zakaria, abu bakar sulong.  (2018).  komposit polimer sebagai suatu teknologi hijau.  - impak oktober 2018.  . 

mohd yusuf zakaria, abu bakar sulong, mohd ikram ramli, bonaventure ukwueze, wan sharuzi wan harun dan rahimi l. mahmud.  (2018).  fabrication of porous titaniumhydroxyapatite composite via powder metallurgy with space holder method.  - journal of advanced manufacturing technology.  . 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana, ruey shan chen, mohd hafizuddin ab ghani, sahrim ahmad.  (2018).  uv/o3 treatment as a surface modification of rice husk towards preparation of novel biocomposites.  - plos one.  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2018).  extrusion process of polypropylene composites reinforced milled carbon fibre for conductive polymer composite application.  - 4th engineering science and technology international conference (estic 2018).  65-69. 

teuku husaini, shuhaimi, abu bakar sulong.  (2018).  effect of temperature on the mechanical performance of highly conductive composites for ht-pemfc application.  - jurnal kejuruteraan.  . 

abu bakar sulong, nabilah afiqah mohd radzuan, mohd rizal mamat,izdihar tharazi, dulina tholibon, radwan dweiri, mohannad saleh hammadi.  (2018).  kenaf reinforced pla composite thermoforming: a numerical simulation.  - international journal of integrated engineering.  . 

gaaz, ts., sulong, a.b., ansari, m.n.m., kadhum, a.a.h., al-amiery, a.a., nassir, m.h..  (2017).  effects of starch loading on the thermo mechanical and morphological properties of polyurethane composites.  - materials.  1-14. 

salleh, f.m., sulong, a.b., raza, m.r., muhamad,n., fhang, l.t.  (2017).  effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding.  - sains malaysiana.  1651-1657. 

asri,n.f., husaini,t., majlan, e.h., sulong,a.b., daud, w.r.w..  (2017).  electrochemical behaviour and of ti-6al-4v and sus 316l plates with potential application as a bipolar plate in pemfc.  - journal of mechanical engineering.  155-170. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri & farrahshaida salleh.  (2017).  two component injection moulding of bimaterial of stainless steel and yttria stabilized zirconia green part.  - jurnal kejuruteraan.  49-55. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad, zainuddin sajuri.  (2017).  the characterization and rheological investigation of materials for powder injection molding.  - journal of mechanical engineering.  97-107. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2017).  electrical properties of extruded milled carbon fibre and polypropylene.  - journal of composite materials.  3187-3195. 

gaaz,t.s., sulong, a.b., kadhum, a.h..  (2017).  influence of sulfuric acid on the tensile properties of halloysite reinforced polyurethane composite.  - journal of mechanical engineering.  1-10. 

che husna azhari, abu bakar sulong, rozli zulkifli.  (2017).  advances in materials processing and integrity non metals and hybrids.  - .  177. 

che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in material processing & integrity - non metals and hybrids.  - .  215. 

raza, m.r., ahmad, f., muhamad, n., sulong, a.b., omar, m.a., akhtar, m.n., aslam, m., sherazi, i..  (2017).  effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 l - stainless steel.  - sains malaysiana.  285-293. 

a.b. sulong, m.n. akhtar, s. ab. karim & c.h. azhari.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - .  14. 

che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - .  7. 

ahmad,r.n., muhamad,n., sulong, a.b., wahi, a., salleh, f.m..  (2017).  rheological properties of titanium niobium based feedstocks for metal injection molding.  - journal of mechanical engineering.  139-149. 

ghoushji, m.j., eshkoor, r.a., zulkifli, r., sulong, a.b., abdullah, s., azhari, c.h..  (2017).  energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes.  - journal of reinforced plastics and composites.  1028-1037. 

che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in materials : processing and integrity non metals and hybrids.  - .  215. 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana mohd, mohd hafizuddin abdul ghani, sahrim ahmad.  (2017).  effect uv/o3 modified rice husk on the mechanical properties of recycle hdpe rice husk composite.  - journal of mechanical engineering.  13-22. 

tharazi, i., sulong, a.b., muhamad, n., haron, c.h.c., tholibon, d., ismail., n.f., radzi, m.k.f.m., razak, z..  (2017).  optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - advances in material and processing technologies conference, ampt 2017 (procedia engineering).  . 

gaaz, t.s., sulong, a.b., kadhum, a.a.h., nassir, m.h., al-amiery, a.a..  (2017).  surface improvement of halloysite nanotubes.  - applied sciences (switzerland).  291-299. 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad & mohd ikram ramli.  (2017).  feedstock preparation of titanium-hydroxyapatite with temporary space holder for powder injection molding.  - advanced processes and systems in manufacturing an international conference 2016.  1-2. 

gaaz, t.s., sulong, a.b., kadhum, a.a.h., al-amiery, a.a., nassir, m.h., jaaz, a.h..  (2017).  the impact of halloysite on the thermo-mechanical properties of polymer composites.  - molecules.  838-858. 

zakaria razak, abu bakar sulong, norhamidi muhamad, mohd khairul fadzly mdradzi, dulina tholibon, izdihar tharazi, nur farhani ismail.  (2017).  effect of multi-walled carbon nanotube on mechanical properties of kenaf/polypropylene composites.  - journal of mechanical engineering.  107-117. 

nabilah afiqah mohd radzuan,mohd yusuf zakaria, abu bakar sulong,jaafar sahari.  (2017).  the effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites.  - composites part b : engineering.  153-160. 

m. ahsanul haque , a.b. sulong, k.s. loh, e. herianto majlan,t. husaini, r. emilia rosli.  (2017).  acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: a review.  - international journal hydrogen energy.  9156-9179. 

nabilah afiqah mohd radzuan, abu bakar sulong, jaafar sahari.  (2017).  a review of electrical conductivity models for conductive polymer composite.  - international journal of hydrogen energy.  9262-9273. 

dulina tholibon, abu bakar sulong, norhamidi muhamad, nur farhani ismail, izdihar tharazi, mohd khairul fadzly md radzi.  (2017).  optimization of hot pressing process for unidirectional kenaf polypropylene composites by full factorial design.  - journal of mechanical engineering.  23-35. 

r. r. r. nishata, a. b. sulong, n. y. yuliana and a. sahrim.  (2017).  effect of surface modified rice husk (rh) on the flexural properties of recycled hdpe/rh composite.  - advances in materials and processing technologies.  482-489. 

nur farhani ismail, norhamidi muhamad, abu bakar sulong, che hassan che haron, dulina tholibon, izdihar tharazi, mohd khairul fadzly mdradzi, zakaria razak.  (2017).  mechanical properties of compression molded epoxy polymer composites reinforced with kenaf fibers.  - journal of mechanical engineering.  1-12. 

majid niaz akhtar, abu bakar sulong, muhammad shahid nazir, khaliq majeed, mohd. khairul fadzly radzi, nur farhani ismail & muhammad rafi raza.  (2017).  green biocomposites manufacturing and properties.  - .  409. 

mohd yusuf zakaria, abu bakar sulong, mohd ikram ramli, muhammad rafi raza.  (2017).  determination of critical powder loading of titanium hydroxyapatite with powder space holder for powder injection molding feedstocks.  - journal of mechanical engineering.  11-21. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, mohd yusuf zakaria.  (2017).  rheological properties of titanium alloy ti6al4v wollastonite w composite using palm stearin as based binder.  - journal of mechanical engineering.  87-96. 

tayser sumer gaaz, abdul amir h kadhum, patina kiah anak michael, ahmed al amiery, abu bakar sulong, abu bakar sulong, mohamed h nassir, ahmed hameed jaaz.  (2017).  unique halloysite nanotubes polyvinyl alcohol polyvinylpyrrolidone composite complemented with physico chemical characterization.  - polymers.  207-222. 

majid niaz akhtar, a. rahman, a.b. sulong, muhammad azhar khan.  (2017).  structural, spectral, dielectric and magnetic properties of ni0.5mgxzn0.5-xfe2o4 nanosized ferrites for microwave absorption and high frequency applications.  - ceramics international.  4357-4365. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al amiery.  (2017).  optimizing physio mechanical properties of halloysite reinforced polyurethane nanocomposites by taguchi approach.  - science of advanced materials.  1-13. 

nur fawwaz asri, teuku husaini, abu bakar sulong, edy herianto majlan, wan ramli wan daud.  (2017).  coating of stainless steel and titanium bipolar plates for anticorrosion in pemfc: a review.  - international journal of hydrogen energy.  9135-9148. 

r.e. rosli, a.b. sulong, w.r.w. daud, m.a. zulkifley, t. husaini, m.i. rosli, e.h. majlan, m.a. haque.  (2017).  a review of high-temperature proton exchange membrane fuel cell (ht-pemfc) system.  - international journal of hydrogen energy.  9293-9314. 

amir ariffin & abu bakar sulong.  (2017).  effect of mixing parameters on the mixing time and density of composite ha/ti6al4v feedstock for powder injection molding.  - 1st sriwijaya international conference on engineering, science and technology, sicest 2016.  . 

n emira binti azaman, m rafi raza, n muhamad, m niaz akhtar & a bakar sulong.  (2017).  rheological study of copper and copper grapheme feedstock for powder injection molding.  - 2nd international conference on rheology and modeling of materials, ic-rmm 2015 (journal of physics: conference series).  . 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong & zakaria razak.  (2017).  optimizing injection parameters of kenaf filler polypropylene composite by taguchi method.  - 1st international conference on frontiers of composite materials, icfcm 2016.  . 

tholibon, d., sulong, a.b., ismail, n.f., tharazi, i., md radzi & m.k.f..  (2017).  unidirectional kenaf polypropylene composites: optimization process by two level full factorial.  - 1st international conference on frontiers of composite materials, icfcm 2016.  . 

salleh f.m., sulong a.b., raza m.r., muhamad n., fhang l.t..  (2017).  effects of space holder on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding.  - sains malaysiana.  . 

tayser sumer gaaz , abu bakar sulong , abdul amir h. kadhum , mohamed h. nassir , ahmed a. al-amiery.  (2017).  absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by taguchi and anova approaches.  - results in physics.  3287-3300. 

m.f.f.a.hamidi, w.s.w.harun, m.samykano, s.a.c.ghani, z.ghazali, f.ahmad, a.b.sulong.  (2017).  a review of biocompatible metal injection moulding process parameters for biomedical applications.  - materials science and engineering c.  1263-1276. 

m. i. ramli, a. b. sulong, n. muhamad, a. muctar, m. h. ng, l. shanmuganantha, m. y. zakaria.  (2017).  ti6al4v/wollastonite composite through powder injection molding process for bone implant application.  - international medical device and technology conference 2017.  . 

nur fawwaz asri, teuku husaini, abu bakar sulong, wan ramli wan daud, edy herianto majlan & bushroa abdul razak.  (2017).  anticorrosion and electrical conductivity of sus 316l plates with cr as surface modification for bipolar plates potential at anode/cathode in pemfc.  - 6th international conference on fuel cell & hydrogen technology 2017 (icfcht2017).  . 

farrahshaida mohd salleh, abu bakar sulong, farhana mohd foudzi, intan fadhlina mohamed, natasha emira azaman, najla nazihah mas'ood, seong jin park.  (2017).  flow behavior characterization of hydroxyapatite for powder injection molding (pim).  - journal of mechanical engineering.  77-88. 

nor nabilla kadiman, julie elbyana romli, norhamidi muhamad, abu bakar sulong, farhana mohd foudzi.  (2017).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  1039-1043. 

ahmad tajuddin, teuku husaini, edy herianto majlan, wan ramli wan daud & abu bakar sulong.  (2017).  effect of assembly pressure on the performance of full stack pemfc: a review on the recent development of modeling and experimental research.  - 6th international conference on fuel cell & hydrogen technology 2017 (icfcht2017).  . 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana, mohd hafizuddin ab ghani, sahrim ahmad.  (2017).  pengoptimumam pemprosesan komposit rhdpe berpenguat sekam padi dengan kaedah tindak balas permukaan (rsm).  - sains malaysiana.  1749-1756. 

r.e. rosli, a.b. sulong,w.r.w. daud, m.a. zulkifley, t. husaini, m.i. rosli, e.h. majlan & m.a. haque.  (2017).  design and development of ht-pemfc test cell and test station.  - 6th international conference on fuel cell & hydrogen technology 2017 (icfcht2017).  . 

nur fawwaz asri, t. husaini, edy herianto majlan, abu bakar sulong, wan ramli wan daud.  (2017).  electrochemical behaviour and interfacial contact resistance of ti-6al-4v and sus 316l plates with potential application as a bipolar plate in pemfc.  - journal of mechanical engineering.  155-170. 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana,mohd hafizuddin ab ghani,sahrim ahmad.  (2017).  pengoptimumam pemprosesan komposit rhdpe berpenguat sekam padi dengan kaedah tindak balas permukaan (rsm).  - sains malaysiana.  . 

majid j ghoushji, rahim a eshkoor, rozli zulkifli, abu b sulong, shahrum abdullah and che h azhari.  (2017).  energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes.  - journal of reinforced plastics and composites.  . 

amir arifin, abu bakar sulong, lee choy fun, gunawan and irsyadi yani.  (2017).  porous titanium alloy/hydroxyapatite composite using powder compaction route.  - journal of mechanical engineering and sciences.  . 

iswandi, abu bakarsulong & teuku husaini.  (2017).  effect of g/pp cpc on electtrical conductivity properties at manufacturing of bipolar plate.  - 6th international conference on fuel cell & hydrogen technology (icfcht2017).  . 

majid niaz akhtara, abu bakar sulong, m.k. fadzly radzi, n.f. ismail, m.r. razab, norhamidi muhamad, muhammad azhar khan.  (2016).  influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications.  - progress in natural science: materials international.  657-664. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al-amiery.  (2016).  impact of sulfuric acid treatment of halloysite on physico-chemic property modification.  - materials.  1-16. 

abu bakar sulong, amir arifin, zambri harun.  (2016).  jig prototype for computer-assisted total knee replacement and its flow simulation.  - international journal of technology.  132-140. 

muhammad rafi raza, faiz ahmad, norhamidi muhamad , abu bakar sulong , m.a. omar,majid niaz akhtar, muhammad aslam.  (2016).  effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 l stainless steel.  - powder technology.  135-142. 

majid niaz akhtar, abu bakar sulong, saniah ab karim, che husna azhari, mr raza.  (2016).  evaluation of thermal, morphological and mechanical properties of pmma/nacl/dmf electrospun nanofibers: an investigation through surface methodology approach.  - iranian polymer journal.  1025-1038. 

majid niaz akhtar, abu bakar sulong , mukhtar ahmad, muhammad azhar khan,akbar ali, m.u. islam.  (2016).  impacts of gdece on the structural, morphological and magnetic properties of garnet nanocrystalline ferrites synthesized via solegel route.  - journal of alloys and compounds.  486-495. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, abu bakar sulong, huda abdullah.  (2016).  pengaruh suhu sinter terhadap prestasi elektrokimia katod komposit sel bahan api oksida pepejal (sofc) lscf-sdcc.  - sains malaysiana.  459-465. 

tayser sumer gaas, abu bakar sulong, abdul amir h. kadhum, mohamed h. nassir and ahmed a. al amiery.  (2016).  optimizing injection molding parameters of different halloysites type reinforced thermoplastic polyurethane nanocomposites via taguchi complemented with anova.  - materials.  1-19. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar & mohd yusuf zakaria.  (2016).  powder injection molding of ti6al4v-w composite: rheological properties.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  13-14. 

tayser sumer gaaz, abu bakar sulong, abdul amir h. kadhum.  (2016).  effect of hnts addition in the injection moulded thermoplastic polyurethane matrix on the mechanical and thermal properties.  - sains malaysiana.  1235-1242. 

dulina tholibon, abu bakar sulong, norhamidi muhammad, nur farhani ismail, izdihar tharazi, mohd khairul fadzly md radzi.  (2016).  tensile properties of unidirectional kenaf fiber polypropylene composite.  - jurnal teknologi.  101-106. 

nabilah afiqah mohd radzuan , abu bakar sulong, mahendra rao somalu & hendra suherman.  (2016).  die configuration effects on electrical conductivity of polypropylene reinforced milled carbon fiber.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

tatt t.k., muhamad n., muchtar a., sulong a.b., cherng n.m..  (2016).  influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method.  - sains malaysiana.  653-658. 

zakaria razak, abu bakar sulong, norhamidi muhamad, mohd khairul fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2016).  mechanical properties of injection moulded for multi-walled carbon nanotube/ kenaf/ polypropylene hybrid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

mohd khairul fadzly md radzi, abu bakar sulong, norhamidi muhamad & zakaria razak.  (2016).  optimization of injection molding parameters for kenaf/pp composite using taguchi method.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

dulina tholibon, abu bakar sulong, norhamidi muhamad, nur farhani ismail, izdihar tharazi & mohd khairul fadzly md radzi.  (2016).  process optimization of unidirectional kenaf polypropylene composites by full factorial design.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad & zainuddin sajuri.  (2016).  rheological investigation of powder injection molding materials using polyethylene with palm stearin binder system.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

r.e. rosli, a.b. sulong, w.r.w. daud, m.a. zulkifley, m.i. rosli, e.h. majlan & m.a. haque.  (2016).  reactant control system for proton exchange membrane fuel cell.  - 4th international conference on process engineering and advanced materials.  . 

majid niaz akhtar, abu bakar sulong, muhammad azhar khan, mukhtar ahmad, ghulam murtaza, m.r. raza, r. raza, m. saleem, m. kashiff.  (2016).  structural and magnetic properties of yttrium iron garnet (yig) and yttrium aluminum iron garnet (yaig) nanoferrites prepared by microemulsion method.  - journal of magnetism and magnetic materials.  425-431. 

wahi a., muhamad n., sulong a.b., ahmad r.n..  (2016).  effect of sintering temperature on density, hardness and strength of mim co30cr6mo biomedical alloy.  - funtai oyobi fummatsu yakin/journal of the japan society of powder and powder metallurgy.  434-437. 

gaaz, t.s., sulong, a.b., ansari,m.n.m., h kadhum, a.a., al-amiery, a.a., al-furjan, m.s.h..  (2016).  effect of halloysite nanotubes loading on thermo-mechanical and morphological properties of polyurethane nanocomposites.  - materials technology.  430-442. 

baharuddin n.a., muchtar a., somalu m.r., sulong a.b., abdullah h..  (2016).  effects of sintering temperature on the electrochemical performance of solid oxide fuel cell (sofc) composite cathode lscf-sdcc.  - sains malaysiana.  459-465. 

mohd khairul fadzly md radzi, abu bakar sulong, baharuddin mohd zanggi, norhamidi muhammad.  (2016).  mouldability of wood filler reinforced polypropylene composite for injection moulded engine cover using mould filing simulation.  - jurnal teknologi.  75-81. 

lohashenpahan shanmuganatha, angela ng min hwei, abu bakar sulong, roslinda shamsudin.  (2016).  a novel approach to optimize the fabrication of metal-ceramic scaffold and its regulation on msc cell behaviour on molecular level for tissue engineering application.  - 6th malaysian tissue engineering and regenerative medicine scientific meeting mterms 2016 in conjunction with 2nd malaysian stem cell meeting.  . 

iswandi, jaafar sahari, abu bakar sulong, teuku husaini.  (2016).  critical powder loading and rheological properties of polypropylene/graphite composite feedstock for bipolar plate application.  - malaysian journal of analytical sciences.  687-696. 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana mohd, hafizuddin ab ghani & sahrim ahmad.  (2016).  effect of uv/o3 modified rh on the tensile properties of rhdpe/rh composite.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

izdihar tharazi, abu bakar sulong, norhamidi muhamad, che hassan che haron, dulina tholibon, nur farhani ismail, mohd khairul fadzly md radzi & zakaria razak.  (2016).  tensile properties of unidirectional kenaf fibre reinforced polylactic-acid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  . 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2016).  pengoptimuman proses penyemperitan gentian karbon terkisar dan polipropilena bagi komposit polimer pengalir.  - sains malaysiana.  1913-1921. 

eshkoor r.a., ude a.u., sulong a.b., zulkifli r., ariffin a.k., azhari c.h..  (2015).  energy absorption and load carrying capability of woven natural silk epoxy - triggered composite tubes.  - composites part b: engineering.  10-18. 

tayser sumer gaaz, abu bakar sulong , majid niaz akhtar , abdul amir h. kadhum, abu bakar mohamad and ahmed a. al amiery.  (2015).  properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites.  - molecules.  22833-22847. 

wong yee ning, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2015).  effects of vanadium carbide on sintered wc-10%co produced by micro-powder injection molding.  - sains malaysiana.  1175-1181. 

muhammad rafi raza, abu bakar sulong, norhamidi muhamad, majid niaz akhtar, javad rajabi.  (2015).  effects of binder system and processing parameters on formability of porous ti/ha composite through powder injection molding.  - materials and design.  386-392. 

s.a. muhammed ali, ros emilia rosli, andanastuti muchtar, abu bakar sulong, mahendra rao somalu, edy herianto majlan.  (2015).  effect of sintering temperature on surface morphology and electrical properties of samarium-doped ceria carbonate for solid oxide fuel cells.  - ceramics international.  1323-1332. 

w.m.f wan mahmood, j.a. ghani, n. saibani, z. harun, a.b. sulong, m.j. ghazali, m.r.a. mansor, s. abdullah.  (2015).  performance of undergraduate students in conducting research in two engineering programmes.  - journal of engineering science and technology.  52-60. 

rajabi j., zakaria h., muhamad n., sulong a.b., fayyaz a..  (2015).  fabrication of miniature parts using nano-sized powders and an environmentally friendly binder through micro powder injection molding.  - microsystem technologies.  1131-1136. 

t. husaini, nur fawwaz asri, abu bakar sulong, wan ramli wan daud and edy herianto majlan.  (2015).  coating of metal bipolar plates for anticorrosion in pemfc: a review.  - the 5th international conference on fuel cell and hydrogen technology (icfcht2015).  . 

fayyaz a., muhamad n., sulong a.b., yunn h.s., amin s.y.m., rajabi j..  (2015).  micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties.  - ceramics international.  3605-3612. 

r.e.rosli, a.b.sulong, w.r.w.daud, m.a.zulkifley, masli i.rosli, m.ahsanul haque..  (2015).  overview of high temperature proton exchange membrane fuel cell system.  - the 5th international conference on fuel cell and hydrogen technology (icfcht2015).  . 

abu bakar bin sulong, norhamidi bin muhamad, syarif junaidi bin sjarifuddin djalil.  (2015).  novel porous composite (titanium-hydroxyapatite): effect of powder injection molding process parameters on its formability.  - .  . 

m. ahsanul haque, a. bakar sulong, l. kee. shyuan, e. herianto. majlan, t. husaini, r. e. rosli..  (2015).  a review on acid doped polybenzimidazoles/platinum membrane electrode assembly for high temperature proton exchange membrane fuel cell.  - the 5th international conference on fuel cell and hydrogen technology (icfcht2015).  . 

ismail, n. f., sulong, a. b.*, muhamad, n., tholibon, d., mdradzi, m. k. f. wan ibrahim, w. a. s..  (2015).  review of the compression moulding of natural fiber reinforced thermoset composites material processing and characterisations.  - pertanika journal of science and technology.  533-547. 

md radzi m. k. f., sulong, a. b., muhamad, n., mohd latiff, m. a., and ismail, n. f..  (2015).  effect of filler loading and naoh addition on mechanical properties of moulded kenaf polypropylene composite.  - pertanika journal tropical agricultural science.  583-590. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif.  (2015).  characterization of hydroxyapatite ti6al4v composite powder under various sintering temperature.  - jurnal teknologi.  27-31. 

j. rajabi, a. b. sulong, n. muhamad, m. r. raza.  (2015).  powder compaction of bi-materials:stainless steel 316l and nanocrystaline yttria stabilized zirconia.  - materials technology.  313-320. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2015).  powder injection molding of ha ti6al4v composite using palm stearin as based binder for implant material.  - material and design.  1028-1034. 

mohd yusuf zakaria, abu bakar sulong, jaafar sahari, hendra suherman,.  (2015).  effect of the addition of milled carbon fiber as a secondary filler on the electrical conductivity of graphite/epoxy composites for electrical conductive materials.  - composite part b.  75-80. 

andanastuti muchtar, mariyam jameelah binti ghazali, abu bakar bin sulong.  (2015).  translucency and improved fracture toughness of nanocrystalline oxide ceramics by morphology control.  - .  . 

wan hasbulalfi wan haron, dulina tholibon, abu bakar sulong, nur farhani ismail.  (2014).  composite based mixed recycled plastic with tropical wood dust mechanical and physical properties.  - australian journal of basic and applied sciences.  288-291. 

hafizawati zakaria, norhamidi muhamad, abu bakar sulong, mohd halim irwan ibrahim, farhana mohd foudzi.  (2014).  moldability characteristics of 3mol yttria stabilized zirconia feedstock for micro-powder injection molding process.  - sains malaysiana.  129-136. 

h. suherman, j. sahari, a. b. sulong, s. astuti, e. septe.  (2014).  properties of epoxy/carbon black/graphite composites for bipolar plate in polymer electrolyte membrane fuel cell.  - advanced materials research.  8-12. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  ha/ti6al4v powder with palm stearin binder system - feedstock characterization.  - applied mechanics and materials.  372-375. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, muhammad rafi raza.  (2014).  the effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part.  - materials and design.  223-232. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  material processing of hydroxyapatite and titanium alloy (ha/ti) composite as implant materials using powder metallurgy: a review.  - materials and design.  55:165-175. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, javad rajabi, yee ning wong.  (2014).  fabrication of cemented tungsten carbide components bymicro-powder injection moulding.  - journal of materials processing technology.  214:1436-1444. 

s.y. heng, m.r. raza, n. muhamad, a.b. sulong, a. fayyaz.  (2014).  micro powder injection molding (upim) of tungsten carbide.  - international journal of refractory metals and hard materials.  45:189-195. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  development of ha/ti composite for biomedical application via powder injection molding.  - regenerative research.  67-68. 

shahrum abdullah, jaharah ab ghani, norhamidi muhamad, dzuraidah abd wahab, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad, zaliha wahid.  (2014).  kkkp 4415 projek industri : kajian kes penilaian kejuruteraan kompleks dalam program pembuatan.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm.  . 

baharuddin n.a., rahman h.a., muchtar a., sulong a.b., abdullah h..  (2014).  effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc.  - sains malaysiana.  595 - 601. 

wan fathul hakim w. zamri, abu bakar sulong, rizauddinramli, nor kamaliana khamis, hawa hishamuddin, zaliha wahid, shahrum abdullah.  (2014).  pengukuran keberkesanan program kejuruteraan pembuatan di ukm menggunakan model rasch.  - seminar pendidikan kejuruteraan dan alam bina (peka 2013) / pusat penyelidikan kejuruteraan, fkab, ukm..  . 

wan fathul hakim w. zamri, abu bakar sulong,rizauddin ramli, nor kamaliana khamis, hawa hishamuddin, shahrum abdullah.  (2014).  maklumbalas alumni terhadap keberkesanan program kejuruteraan pembuatan di ukm.  - seminar pendidikan kejuruteraan dan alam bina (peka 2013).  . 

nurul akidah baharuddin, hamimah ab rahman, andanastuti muchtar, abu bakar sulong & huda abdullah.  (2014).  kesan masa pengendapan dan saiz elektrod pembalik dalam penghasilan katod komposit lscf-sdc karbonat sel fuel oksida pepejal.  - sains malaysiana.  43(4): 595-601. 

shahrum abdullah, jaharah a ghani,wan mohd faizal wan mahmood, zainuddin sajuri, abu bakar sulong, wan fathul hakim w. zamri, abdullah zawawi mohamad.  (2014).  cadangan pembangunan rubrik untuk penilaian kejuruteraan kompleks dalam projek ilmiah.  - kongres pengajaran dan pembelajaran ukm 2013 / pusat penyelidikan pendidikan kejuruteraan, fakulti kejuruteraan dan alam bina ukm.  . 

r.a. eshkoor, a.u. ude, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2014).  failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism.  - international journal of impact engineering.  53-61. 

norbahiah misran, zahira yaacob, siti kartom kamaruddin, wardah fatimah, shahrum abdullah, abu bakar sulong, ahmad ashrif a. bakar, amiruddin ismail, wan mimi diyana, othman jaafar, farizah ansarudin, azhari shamsudeen, mohd huzairi johari.  (2014).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-96. 

m. i. ramli, a. b. sulong, n. muhamad, a. muchtar and a. arifin.  (2014).  stainless steel 316l hydroxyapatite composite via powder injection moulding: rheological and mechanical properties characterisation.  - material research innovation.  100-104. 

ja`afar bin sahari @ shaari, abu bakar bin sulong.  (2014).  electrically conducting polymer composites for fuel cell bipolar plate.  - .  . 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes.  - materials and design.  47:248-257. 

norbahiah misran, zahira yaacob, siti kartom kamaruddin, shahrum abdullah, abu bakar sulong, amiruddin ismail, othman jaafar, wardah fatimah mohd yusoff, ahmad ashrif a. bakar, wan mimi diyana wan zaki, farizah ansarudin, mohd fairus awang, arif mohd sham.  (2013).  jurnal kejuruteraan.  - jurnal kejuruteraan.  1-45. 

royan, nishata rajendran royan; sulong, abu bakar; sahari, jaafar; suherman, hendra.  (2013).  effect of acid- and ultraviolet/ozonolysis-treated mwcnts on the electrical and mechanical properties of epoxy nanocomposites as bipolar plate applications.  - journal of nanomaterials.  Art no.717459. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2013).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  39(3):2665-2674. 

qian wen yeang, sharif hussein sharif zein, abu bakar sulong, soon huat tan.  (2013).  comparison of the pervaporation performance of various types of carbon nanotube-based nanocomposites in the dehydration of acetone.  - separation and purification technology.  107:252-263. 

abu bakar sulong, mohd ikram ramli, seow liang hau, jaafar sahari, norhamidi muhamad, hendra suherman.  (2013).  rheological and mechanical properties of carbon nanotube/graphite/ss316l/polypropylene nanocomposite for a conductive polymer composite.  - composite: part b.  50:54-61. 

hendra suherman, abu bakar sulong, jaafar sahari.  (2013).  effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte......  - ceramics international.  39(2):1277-1284. 

nurul akidah baharuddin, andanastuti muchtar, abu bakar sulong & huda abdullah.  (2013).  effect of deposition time on lscf-sdc carbonate thin film formation by the electrophoretic deposition method.  - advanced materials research.  . 

r.a. eshkoor, s.a. oshkovr, a.b. sulong, r. zulkifli, a.k. ariffin, c.h. azhari.  (2013).  effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes.  - composites part b: engineering.  55:5-10. 

muhammad ilman hakimi chua, abu bakar sulong, mohd fazuri abdullah & norhamidi muhamad.  (2013).  optimization of injection molding and solvent debinding parameters of stainless steel powder (ss316l) based feedstock for metal injection molding.  - sains malaysiana.  42(12):1743-1750. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, ahmad kamal ariffin mohd ihsan, jaharah ab ghani, mohd anas mohd sabri, zainuddin zajuri, shahrum abdullah, abu bakar sulong.  (2013).  direct measurement and evaluation for mechanical engineering programme outcomes: impact on continuous improvement.  - international education studies.  161-167. 

n.a. baharuddin, a. muchtar, a.b. sulong, h. abdullah.  (2013).  fabrication methods for planar solid oxide fuel cells : a review.  - advanced materials research.  . 

muhammed ali s. a., andanastuti muchtar, abu bakar sulong, norhamidi muhamad, edy herianto majlan.  (2013).  influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells.  - ceramics international.  39(5):5813-5820. 

hendra suherman, jaafar sahari, abu bakar sulong.  (2013).  effect of small-sized conductive filler on the properties of an epoxy composite for a bipolar plate in a pemfc.  - ceramics international.  39(6):7159-7166. 

shye yunn heng, norhamidi muhamad, abu bakar sulong, abdolali fayyaz, sri yulis m. amin.  (2013).  effect of sintering temperature on the mechanical and physical properties of wc-10%co through micro-powder injection molding (mpim).  - ceramics international.  39:4457-4464. 

amirhossein mansourighasri, n. muhamad, a. b. sulong.  (2012).  processing titanium foams using tapioca starch as a space holder.  - journal of materials processing technology.  212:83-89. 

nor kamaliana khamis, abu bakar sulong, baba md deros.  (2012).  a case study on peer review and lecturer evaluations in an academic setting.  - asian social science.  8(16):192-199. 

abdolali fayyaz, norhamidi muhamad, abu bakar sulong, heng shye yunn, sri yulis m. amin, javad rajabi.  (2012).  effect of dry and wet ball milling process on critical powder loading and mixture properties of fine wc-10co-0.8vc powder.  - jurnal teknologi.  59:147-150. 

javad rajabi, norhamidi muhamad, abu bakar sulong.  (2012).  effect of nano-sized powders on powder injection molding: a review.  - microsystem technologies.  18(12):1941-1961. 

javad rajabi, norhamidi muhamad, abu bakar sulong, abdolli fayyaz, azizah wahi.  (2012).  advantages and limitations of using nano sized powders for powdew injection molding process: a review.  - jurnal teknologi.  59:143-146. 

mohd anas mohd sabri, abu bakar sulong, fung kuon chin, jaafar sahari.  (2012).  effect of corrossion on the electrical conductivity of metals and polymer composite.  - jurnal teknologi.  59(2):81-85. 

abu bakar sulong, norhamidi muhamad, amir arifin, kuu bi yong.  (2012).  optimizing injection parameter of metal injection molding processes using the feedstock of 16um stainless steel powder (ss316l), peg, pmma and stearic acid.  - journal of applied sciences research.  8(6):2998-3003. 

mohd ruzi harun, norhamidi muhamad, abu bakar sulong, nor hafiez mohamad nor, khairur rijal jamaludin, mohd halimirwan ibrahim.  (2012).  solvent debinding process for zk60 magnesium alloy mim compact.  - jurnal teknologi.  59:165-169. 

eghbal hakimian, abu bakar sulong.  (2012).  analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the taguchi method.  - materials and design.  42:62-71. 

tan koon tatt, norhamidi muhamad, andanastuti muchtar, abu bakar sulong, heng shye yunn.  (2012).  rheological behaviour of novel feedstock for manufacturing porous stainless steel via (mim)-psh.  - jurnal teknologi.  59:187-191. 

harun, m.r., muhamad, n., sulong, a.b., mohamad nor, n.h., jamaludin, k.r..  (2012).  metal injection moulding of zk60 magnesium alloy powder using palm stearin based binder system.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research).  . 

mohd anas mohd sabri, nor kamaliana khamis, mohd faizal mat tahir, zaliha wahid, ahmad kamal ariffin mohd ihsan, abu bakar sulong, shahrum abdullah..  (2012).  pembangunan kurikulum berdasarkan kaedah penilaian gambar besar untuk program kejuruteraan mekanikal.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012).  . 

mohd anas mohd sabri, nor kamaliana khamis, mohd faizal mat tahir, zaliha wahid, ahmad kamal ariffin mohd ihsanb, abu bakar sulong & shahrum abdullah.  (2012).  pembangunan kurikulum berdasarkan kaedah penilaian gambaran besar untuk program kejuruteraan pembuatan.  - kongres pengajaran & pembelajaran ukm 2012 - seminar pendidikan kejuruteraan & alam bina (peka 2012).  . 

saniah abdul karim, abu bakar sulong, che husna azhari, teng her lee, ng min hwei.  (2012).  optimization of electrospinning parameters using response surface methods to enhance fiber diameter, mechanical properties and orientation of nanofibers.  - journal of applied science research.  8(5):250-2517. 

mohd ikram ramli, abu bakar sulong, amir arifin, andanastuti muchtar, norhamidi muhamad.  (2012).  powder injection molding of ss316l/ha composite: rheological properties and mechanical properties of the green part.  - journal of applied sciences research.  8(11):5317-5321. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2012).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  2665-2674. 

mohd faizal mat tahir, norkamaliana khamis, zaliha wahid, zainuddin sajuri, shahrum abdullah, ahmad kamal ariffin mohd ihsan, abu bakar sulong, jaharah ab ghani, mohd anas mohd sabri.  (2012).  pengukuran dan penilaian secara langsung bagi hasil program kejuruteraan mekanik : kesan terhadap penambahbaiakan berterusan.  - kongres pengajaran dan pembelajaran ukm 2012 -seminar pendidikan kejuruteraan dan alam bina 2012.  . 

mohd faizal mat tahir, zaliha wahid, zainuddin sajuri, shahrum abdullah, jaharah ab. ghani, ahmad kamal ariffin mohd ihsan, abu bakar sulong, mohd anas mohd sabri, norkamaliana khamis.  (2012).  pengukuran dan penilaian secara langsung bagi hasil pembelajaran kursus di jabatan kejuruteraan mekanik dan bahan : kesan terhadap penambahbaikan berterusan..  - kongres pengajaran dan pembelajaran ukm 2012 - seminar pendidikan kejuruteraan dan alam bina 2012.  . 

nor kamaliana khamis, zambri harun, mohd faizal mat tahir, zaliha wahid, mohd anas mohd sabri, ahmad kamal ariffin mohd ihsan, shahrum abdullah, abu bakar sulong dan nizaroyani saibani.  (2012).  faktor motivasi dan kekangan memohon jurutera professional di kalangan ahli akademik : satu kajian empirikal.  - kongres pengajaran & pembelajaran ukm 2012.  . 

eshkour, ra; ariffin, ak; zulkifli, r; sulong, ab; azhari, ch.  (2012).  the failure mode of natural silk epoxy triggered composite tubes.  - 1st international conference on mechanical engineering research 2011 (icmer);kuantan ( iop conference series-materials science and engineering).  . 

r.nishata royan, a.b. sulong, j. sahari.  (2011).  characterization of acid-treated functionalization and uv/o3-treated functionalization on multi-walled carbon nanotubes (mwcnts) conductive filler in bipolar plate.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011).  . 

m.i.ramli, a.b.sulong, e.r.ho, jaafar sahari.  (2011).  electrical conductivity and corrosion phenomenon of carbon nano tube/graphite/ stainless steel powder (ss316l)/ polypropylene nanocomposite.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011).  . 

mohd anas m.s., abu bakar s. , fung kuon c. & jaafar s..  (2011).  phenomenon of corrosion in metallic bipolar plate in electrolyte proton exchange membran fuel cell.  - advanced processes system in manufacturing (apsim2011).  . 

abu bakar sulong, joohyuk park.  (2011).  alignment of multi-walled carbon nanotubes in polyethylene matrix by extrusion shaer flow: mechanical properties enhancement.  - journal of composite materials.  45(8):931-941. 

iswandi, sahari, j., sulong, a.b..  (2011).  effects of different particles sizes of graphite on the engineering properties of graphites/polypropylene composites on injection molding aplication.  - 8th international conference on composite science and technology, iccst8 (key engineering materials); kuala lumpur.  . 

muhammad ilman hakimi chua, abu bakar sulong, norhamidi muhamad, mohd fazuri abdullah and che hassan che haron.  (2011).  optimization of injection parameters using 16mum stainless steel powder (ss316l) at 63 vol. %, 63.5 vol. % and 64 vol. % powder loading by taguchi method for metal injection molding.  - 8th international conference on composite science and technology, iccst8; kuala lumpur(key engineering materials).  . 

r. nishata royan, abu bakar sulong, hendra suherman and
jaafar sahari.  (2011).  effect of wet oxidation on the dispersion and electrical properties of multi-walled carbon nanotubes /epoxy nanocomposites.  - 8th international conference on composite science and technology, iccst8 (key engineering materials); kuala lumpur.  . 

r. nishata royan, abu bakar sulong, jaafar sahari.  (2011).  effect of loading concentration on the electrical and hardness properties of mwcnt/epoxy nanocomposites.  - key engineering materials.  . 

abu bakar sulong, abdullah atiq ariffin, jaafar sahari, and hendra suherman.  (2011).  analysis of energy absorption on pultruded composite tube under oblique loading.  - 8th international conference on composite science and technology location: kuala lumpur, malaysia (key engineering materials).  . 

suherman h., sahari j., sulong a.b..  (2011).  optimization mixing parameters on the electrical conductivity of polymer nanocomposites based on the taguchi method.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials).  . 

ibrahim m.h.i., muhamad n., sulong a.b., jamaludin k.r., nor n.h.m., ahmad s..  (2011).  optimization of micro metal injection molding ss 316l for the highest green strength by using taguchi method.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research).  . 

muhammed ali, s.a., muchtar, a., muhamad, n., sulong, a.b..  (2011).  a review on preparation of sdc-carbonate as composite electrolyte material for intermediate temperature solid oxide fuel cells (it-sofc).  - 2011 ieee 1st conference on clean energy and technology, cet 2011; kuala lumpur.  . 

ramli, i.s., arshad, h., sulong, a.b., yahaya, n.h.mohd., che haron, c.h..  (2011).  enhancing learning experience of novice surgeon with virtual training system for jig and fixture usage.  - 2nd international visual informatics conference, ivic 2011; selangor (lecture notes in computer science).  . 

sulong, a.b, park, j , azhari, c.h , jusoff, k.  (2011).  process optimization of melt spinning and mechanical strength enhancement of functionalized multi-walled carbon nanotubes reinforcing polyethylene fibers.  - composites part b-engineering.  42(1):11-17. 

li h.p., muhamad n., sulong a.b., yunn h.s., abolhasani h..  (2011).  application of taguchi method for parameters optimization in micro metal injection molding.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket; 3 april 2011 through 4 april 2011 (applied mechanics and materials).  . 

mohd fazuri abdullah, abu bakar sulong, norhamidi muhamad, muhammad ilman hakimi chua abdullah, nor hamdan nor yahya.  (2011).  comparison on rheology properties of polypropylene and polyethylene as binder system with stainless steel 316l for metal injection moding.  - key engineering materials.  . 

siti saniah ab. karim, abu bakar sulong, che husna azhari, ng min hwei and mohd reusmaazran yusof.  (2011).  influence of polyacrilonitrile (pan) concentration on the mechanical and physical properties of electrospun fibres.  - key engineering materials.  . 

r a eshkour, a k ariffin, r zulkifli, a b sulong and c h azhari.  (2011).  the failure mode of natural silk epoxy triggered composite tubes.  - 1st international conference in mechanical engineering research (icmer) 2011.  . 

mohd h.i. ibrahim, norhamidi muhamad, abu b. sulong, khairur r. jamaludin, nor h.m. nor and sufizar ahmad.  (2011).  optimization of micro metal injection molding with multiple performance characteristics using grey relational grade.  - chiang mai journal of science.  38(2):231-241. 

hendra suherman, abu bakar sulong, jaafar sahari.  (2011).  electrical properties of carbon nanotubes-based epoxy nanocomposites for high electrical conductive plate.  - international conference on advances in materials and processing technology (ampt) (advanced materials research), shah alam, kuala lumpur, malaysia.  . 

mohd zulkefli selamat, jaafar sahari, norhamidi muhamad, andanastuti muchtar & abu bakar sulong.  (2011).  optimization the compression moulding process for bipolar plate production using taguchi method.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

muhammed ali s.a, *andanastuti muchtar, norhamidi muhamad, abu bakar sulong.  (2011).  improved properties of sdc-carbonate composites for solid oxide fuel cell electrolyte applications.  - the 3rd international conference on fuel cell & hydrogen technology (icfcht 2011), ukm bangi.  . 

a. k. saniah, a. b. sulong, c. h. azhari, t. h. lee,
n. m. hwei.  (2011).  optimization of electrospinning parameters using response surface methods to enhance physical and orientation properties of nanofibers.  - malaysia polymer international conference (mpic) 2011.  . 

yunn h.s., muhamad n., sulong a.b., fayyaz a., li h.p..  (2011).  critical solid loading and rheological study of wc-10%co.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials).  . 

harun, m.r., muhamad, n., sulong, a.b., mohamad nor, n.h., jamaludin, k.r..  (2011).  the development of metal injection moulding for zk60 magnesium alloy using palm stearin based binder system.  - 2011 international conference on frontiers of manufacturing science and measuring technology, icfmm 2011; chongqing (advanced materials research).  . 

harun m.r., muhamad n., sulong a.b., nor n.h.m., ibrahim m.h.i..  (2011).  rheological investigation of zk60 magnesium alloy feedstock for metal injection moulding using palm stearin based binder system.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

ibrahim m.h.i., muhamad n., sulong a.b..  (2011).  rheological characterization of water atomised stainless steel ss316l for micro mim.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research).  . 

foudzi f.m., muhamad n., sulong a.b., zakaria h..  (2011).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding (μmim).  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

mohd fazuri abdullah, abu bakar sulong, ilman hakimi chua, che hassan che haron, jaharah a. ghani.  (2010).  effects of insert nose radius and machining parameters on the surface roughness of stainless steel 316l.  - key engineering materials.  . 

abu bakar sulong, muhammad ilman hakimi, mohd fazuri abdullah, san wei koon, nor hamdan nor yahya, rizauddin ramli.  (2010).  design approach for jig in computer assisted total knee replacement surgery.  - key engineering materials.  . 

abu bakar sulong, gan tek keong, jaafar sahari.  (2010).  effects of molding parameters and addition of fillers on gate chip.  - key engineering materials.  . 

hendra suherman, jaafar sahari, abu bakar sulong.  (2010).  electrical conductivity and micro hardness of synthetic and natural.  - key engineering materials.  . 

hendra suherman, abu bakar sulong, jaafar sahari.  (2010).  effect of filler loading concentration, curing temperature and molding pressure on the electrical conductivity of cnts/graphite/ epoxy nanocomposites at high loading of conductive fillers.  - international journal of mechanical and materials engineering.  5(1)74-79. 

m.h.i. ibrahim, n. muhamad, a.b. sulong, k.r. jamaludin, s. ahmad and n.h.m. nor.  (2010).  optimization of micro metal injection molding for highest green strength by using taguchi method.  - international journal of mechanical and materials engineering (ijmme).  5(2):282-289. 

hendra suherman, jaafar sahari, abu bakar sulong and nishata royan.  (2010).  electrical conductivity and flexural strength of graphite/carbon nanotubes/epoxy nanocomposites.  - key engineering materials.  . 

intan syaheera ramli, haslina arshad, nor hamdan mohd yahaya, abu bakar sulong.  (2010).  development of visualization application (vjbk) for newly designed jig and fixture for computer-assisted knee replacement surgery.  - business transformation through innovation and knowledge management: an academic perspective, istanbul turkey.  . 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2010).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding.  - applied mechanics and materials.  480-484. 

nishata royan a/p rajendran royan, abu bakar sulong & jaafar sahari.  (2010).  an overview of chemical functionalized cnts on the electrical conductivity of a nanocomposite.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

iswandi, jaafar sahari & abu bakar sulong.  (2010).  review of bipolar plates manufacturing in pem fuel cells : parameter injection molding process.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

mohd halim irwan ibrahim, norhamidi muhamad, abu bakar sulong, khairur rijal jamaludin, nor hafiez mohamad nor, sufizar ahmad, mohd ruzi harun and hafizawati zakaria.  (2010).  parameter optimization towards highest micro mim density by using taguchi method.  - key engineering materials.  . 

hendra suherman, abu bakar sulong & jaafar sahari.  (2010).  electrical conductivity and micro hardness of synthetic and natural graphite epoxy composite.  - abstrak pascasidang bengkel penulisan manuskrip jurnal & tesis 2010.  . 

rozli zulkifli, che husna azhari, maryam j. ghazali, ahmad rasdan ismail, abu bakar sulong.  (2009).  interlaminar fracture toughness of multi-layer woven silk/epoxy composites treated with coupling agent.  - european journal of scientific research.  27(3):454-462. 

m. j. ghazali, a. a. pauzi, c. h. azhari, j. a. ghani, a. b. sulong and r. mustafa.  (2009).  effect of starch binders in alumina coatings on aisi 316 l stainless steel for medical application.  - international journal of modern physics b.  23(6-7):1034-1039. 

a. g. jaharah, c. h. che hassan, m. j. ghazali, a. b. sulong, m. z. omar, m. z.nuawi, a. r. ismail.  (2009).  performance of uncoated carbide cutting tool when machining cast iron in dry cutting condition.  - international journal of modern physics b.  23(6-7):1796-1802. 

intan syaherra ramli, haslina arshad, abu bakar sulong, nor hamdan mohd yahaya, and che hassan che haron.  (2009).  visualization of the newly designed jig and fixture for computer-assisted knee replacement surgery.  - lecture notes in computer science.  . 

iswandi, jaafar sahari & abu bakar sulong.  (2009).  sorotan serakan zarah bahan komposit karbon untuk plat dwikutub yang diproses dengan pengacuan suntikan.  - prosiding kolokium & sanggar kerja ii, institut sel fuel, disember 2009.  . 

hendra suherman, abu bakar sulong & jaafar sahari.  (2009).  fabrication of graphite epoxy composite : electrical conductivity and hardness properties.  - prosiding kolokium & sanggar kerja ii, institut sel fuel, disember 2009.  . 

rizauddin ramli, hidehiko yamamoto, abu bakar sulong, dzuraidah abdul wahab, jaber abu qudeiri.  (2009).  real-time agv action decision in ad-fms by hypothetical reasoning.  - european journal of scientific research.  25(2):310-324. 

iswandi, jaafar sahari, abu bakar sulong.  (2009).  review of effect of polymer binder properties to the shrinkage and warpage manufacturing bipolar plate using injection molding process.  - buku abstrak pascasidang bengkel penulisan manuskrip jurnal dan tesis, 18-19 april 2009, residence hotel, uniten.  . 

hendra suherman, abu bakar sulong and jaafar sahari.  (2009).  influence of cnts addition on electrical and hardness properties of the cnts/epoxy nanocomposites.  - buku abstrak pascasidang bengkel penulisan manuskrip jurnal dan tesis, 18-19 april 2009, residence hotel, uniten.  . 

ibrahim m.h.i., muhamad n., sulong a.b..  (2009).  rheological investigation of water atomised stainless steel powder for micro metal injection molding.  - international journal of mechanical and materials engineering.  4(1):1-8. 

sulong a.b., azhari c.h., zulkifli r., othman m.r., park j..  (2009).  a comparison of defects produced on oxidation of carbon nanotubes by acid and uv ozone treatment.  - european journal of scientific research.  33(2):295-304. 

sulong a.b., muhamad n., ghazali m.j., jaharah a.g., tan s.h., park j.h..  (2009).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - international journal of modern physics b.  23(6-7):1419-1424. 

sulong a.b., muhamad n., sahari j., ramli r., deros b.m., park j..  (2009).  electrical conductivity behaviour of chemical functionalized mwcnts epoxy nanocomposites.  - european journal of scientific research.  29(1):13-21. 

hendra suherman, abu bakar sulong, jaafar sahari.  (2009).  effect of filler loading on electrical conductivity cnts/epoxy nanocomposites.  - 4th international conference on recent advances in materials, minerals and environment and 2nd asian symposium on material and processing (ramm & asmp 2009) 1-3 june, penang-malaysia..  . 

mohd yusri mohd yusoff, abu bakar sulong, nor hamdan mohamad yahaya, che hassan che haron.  (2009).  jig holder design as aid for the knee replacement surgery.  - seminar amrer ii, bangi, 2009.  . 

abu bakar sulong, norhamidi muhamad, che husna azahari, ahmad rasdan ismail, joohyuk park.  (2009).  effects of chemical functionalized mwcnts/epoxy matrix composites on electrical conductivity behavior.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009).  . 

mohd ruzi h, norhamidi m, abu bakar s, khairur r.j, nor hafiez m.n, sufizar a, mohd halim i.i, murtadhahadi.  (2009).  a review of workability of wrought magnesium.  - amreg 2009.  . 

murtadhahadi, n. muhamad, a. b. sulong, c. h. c. harun, k. r. jamaludin,m. h. i. ibrahim, n. h. m. nor and s. ahmad.  (2009).  temperature influence to solvent debinding of metal injection molding (mim) components.  - prosiding seminar - amreg 09, 29 july 2009, putrajaya, malaysia.  . 

nishata a/p rajendran royan, abu bakar sulong & jaafar sahari.  (2009).  the effect of chemical functionalization in nano-composite processing : a review.  - prosiding kolokium & sanggar kerja ii, institut sel fuel, disember 2009.  . 

b.m. deros , c.y. peng, m.n. ab rahman, a.r. ismail, a.b. sulong.  (2008).  assessing acceptance sampling application in manufacturing electrical and electronic products.  - journal of achievements in materials and manufacturing engineering.  31(2):622-628. 

norhamidi muhamad, murtadhahadi, che hassan che harun, abu bakar sulong,.  (2008).  kesan suhu penyuntikan yang tidak optimum terhadap kecacatan jasad anum pada proses penyuntikan logam.  - seminar amreg i 2008.  . 

norhamidi muhamad, murtadhahadi, che hassan che harun, abu bakar sulong.  (2008).  pembebanan serbuk yang optimum bagi bahan suapan daripada ss316l, peg, pmma, dan as bagi proses pengacuan suntikan logam (mim).  - seminar amreg i 2008.  . 

abu bakar sulong, norhamidi muhamad, che husna azahari dan joohyuk park.  (2008).  mechanical and electrical properties of functionalized multi-walled carbon nanotubes reinforced polyethylene composite fabricated by extrusion shear flow.  - indonesia nanoletter.  3(2):86-93.. 

a.b. sulong, n. muhamad, m.j. ghazali and a.g. jaharah, soon huat tan, j.h. park.  (2008).  functionalized mwcnts reinforced polyetehylene fiber composite: mechanical strength characterization.  - the fifth international conference on advanced materials and processing, harbin, china.  . 

abu bakar sulong,che husna azahari, nurhamidi muhammad, tan soon huat, and joohyuk park.  (2008).  mechanical properties and fracture behavior of functionalized multi-walled carbon nanotubes reinforced polyethylene fibers composites by melt spinning.  - 6th internation material technology conference & exhibition, kuala lumpur, malaysia.  . 

m.h.i ibrahim, n. muhamad, a.b. sulong, murtadhahadi, k.r. jamaluin, s. ahmat, n.h.m nor.  (2008).  water atomised stainless steel powder for micro metal injection molding : optimization of rheological properties.  - in proceedings mmc 2008 (malaysian metallurgical conference, ukm, malaysia, december 2008.  . 

norhamidi muhamad, murtadhahadi, abu bakar sulong, che hassan che harun, khairur rijal jamaludin,mohd halim irwan ibrahim.  (2008).  kesan parameter percampuran dan pembutiran ke atas penyediaan bahan suapan yang optimum bagi proses pengacuan suntikan logam.  - malaysian metallurgical conference - mmc 2008.  . 

m.h.i ibrahim, n. muhamad, a.b. sulong, murtadhahadi, k.r. jamaludin, s. ahmad, n.h.m nor.  (2008).  rheological characteristic of water atomised stainless steel powder for metal injection molding.  - prosiding seminar ii - amreg 08, bangi, malaysia.  . 

norhamidi muhamad, murtadhahadi, abu bakar sulong, che hassan che harun, khairur rijal jamaludin,mohd halim irwan ibrahim and sufizar ahmad.  (2008).  optimisation of injection parameter in metal injection molding (mim) process.  - amreg ii.  . 

ahmad rasdan ismail, mohd radzi abu mansor, chew bok kim, mazlan md. tahir, ismar m.s. usman, kamaruzzaman sopian,mohd nizam ab rahman, abu bakar sulong, baba md.deros.  (2008).  the relation between the discomfort level of malaysian automotive industries` operators towards their workstation design and work environment.  - proceeding of 9th global congress on manufacturing and management (gcmm2008), 12-14 november 2008, holiday inn, surfers paradise, australia.  . 

hendra suherman, abu bakar sulong and jaafar sahari.  (2008).  high conductive polymer composite as bipolar plate for polymer exchange membrane fuel cell (pemfc) : a review.  - prosiding seminar ii - amreg 08.  . 

hendra suhernan, abu bakar sulong and jaafar sahari.  (2008).  fabrication of carbon nanotube/thermoset nanocomposites for bipolar plate: a review.  - kolokium institut fuel cell.  . 

baba md deros, chua yee peng, mohd nizam ab rahman, ahmad rasdan ismail and abu bakar sulong.  (2008).  assessing acceptance sampling application in manufacturing electrical and electronic products.  - asian international journal of science and technology.  1(2):59-68. 

abu bakar sulung and joohyuk park.  (2007).  fabrication of carbon nanotubes reinforced polyethylene fibers by melt spinning: process optimization and mechanical strength characterization.  - advanced materials research.  26-28:289-292. 

abu bakar sulong and joohyuk park.  (2007).  dynamic thermo-mechanical properties of chemically surface modified mwcnts reinforced polymeric composites.  - advanced materials research.  26-28:285-288. 

joohyuk park and abu bakar sulong.  (2007).  effect of chemically surface modified mwnts on the mechanical and electrical properties of epoxy nanocomposites.  - studies in surface science and catalysis.  165:405-408. 

abu bakar sulung and joohyuk park.  (2007).  fabrication of carbon nanotubes reinforced polyethylene fibers by melt spinning: process optimization and mechanical strength characterization.  - advanced materials research.  . 

abu bakar sulong and joohyuk park, naesung lee and jeungchoon goak.  (2006).  wear behavior of functionalized multi-walled carbon nanotubes reinforced epoxy matrix composites.  - journal of composite material.  40(21):1947-1960.