altaf hossain molla, hilal shams, zambri harun, ahmad nizam che kasim, manoj kumar nallapaneni, mohd nizam ab rahman.  (2023).  evaluation of end of life vehicle recycling system in india in responding to the sustainability paradigm an explorative study.  - scientific reports.  1-18. 

hilal shams, altaf hossain molla, mohd nizam ab rahman, hawa hishamuddin, zambri harun, nallapaneni manoj kumar.  (2023).  exploring industry-specific research themes on e-waste: a literature review.  - sustainability.  1-22. 

tareq ali al ameeri, mohd nizam ab rahman, norhamidi muhamad.  (2023).  analysing effective and ineffective impacts of maintenance strategies on electric power plants: a comprehensive approach.  - energies.  1-11. 

ruizhe yina, mohd nizam ab rahman, kadir arifin, mohd hafizuddin syah bangaan abdullah.  (2023).  risk identification model for lean manufacturing improvement.  - jurnal kejuruteraan.  945-953. 

siti aishah hadawiah ahmad, ariff azly muhamed, mohd nizam ab rahman and habiel zakariah.  (2023).  kesan orientasi pengurusan strategik terhadap kecekapan firma pembuatan halal.  - jurnal kejuruteraan.  159-168. 

nursyafina zulkefli, nizaroyani saibani, mohd nizam ab rahman, hawa hishamuddin.  (2023).  environmental sustainability of electronic industry in supply chain management in malaysia: practices and efficiency of a case study.  - 1st international conference on manufacturing engineering technology (iconmet 2021).  50011-50018. 

*norhidayah mat taib, nur farhani ismail, mohd nizam ab rahman, nizaroyani saibani, meor iqram meor ahmad, norhana arsad.  (2023).  pendedahan awal teknologi revolusi perindustrian 4.0 (ir4.0) kepada remaja di kawasan luar bandar.  - prosiding persidangan pendidikan kejuruteraan dan alam bina 2023.  65-68. 

nizaroyani binti saibani;mohd nizam bin ab rahman;hawa binti hishamuddin.  (2023).  the impact of adversarial tactics as negotiation concepts on supply chain value of smes..  - .  . 

muhammad khairulamirin zamri, nizaroyani saibani, mohd nizam ab rahman, norngainy mohd tawil, siti maisarah mohd pisal, rosni tarmidi & hawa hishamuddin.  (2023).  recent recycling procedures for end-of-life vehicles (elv) metals in malaysia.  - jurnal kejuruteraan.  229-237. 

siti rahimah umar, norlinda omar, mohd nizam ab rahman, kadir arifin, ain basirah zulkifly, mohamad iqmal arbayin, zai azira mohd radzi, mohd hafizuddin syah bangaan abdullah, rahaida ramli, shurianie rahim, mohd noor faizal mohd nadzir, mohammad zakie mo.  (2022).  e-buku kompilasi prosedur operasi standard (sop) pencegahan penularan wabak covid-19 universiti kebangsaan malaysia.  - .  107. 

wan hasrulnizzam wan mahmood, ilyana abdullah, mohd nizam ab rahman.  (2022).  sustainable palm oil mill in malaysia.  - .  179. 

m.z. rafique, m.n.a. rahman, a. raheem, r.a.c. leuveano, n. saibani, n. arsad, w.h.w. mahmood and m.s.amjad.  (2022).  a systematic planning scheme for deployment of technology combined lean implementation framework.  - jurnal kejuruteraan.  29-39. 

muhammad zeeshan rafique, mustafa haider, abdul raheem, mohd nizam ab rahman and muhammad saad amjad.  (2022).  essential elements for radio frequency identification (rfid) adoption for industry 4.0 smart manufacturing in context of technology-organization-environment (toe) framework-a review.  - jurnal kejuruteraan.  1-10. 

khaled m. a. salim, ruhanita maelah, hawa hishamuddin, amizawati mohd amir, mohd nizam ab rahman.  (2022).  two decades of life cycle sustainability assessment of solid oxide fuel cells (sofcs): a review.  - sustainability.  1-18. 

altaf hossain molla, hilal shams, zambri harun, mohd nizam ab rahman and hawa hishamuddin.  (2022).  an assessment of drivers and barriers to implementation of circular economy in the end-of-life vehicle recycling sector in india.  - sustainability.  1-26. 

siti rahimah umar, mohd nizam ab rahman, kadir arifin.  (2021).  prosedur operasi standard (sop) penganjuran majlis di universiti kebangsaan malaysia.  - .  1-14. 

siti rahimah umar, mohd nizam ab rahman, walid osman, suhaida abd rahman, zaimi makhtar, muhammad redzuan zainol abidin, kadir arifin.  (2021).  prosedur operasi standard (sop) peperiksaan secara bersemuka di universiti kebangsaan malaysia.  - .  1-12. 

mohd noor faizal mohd nadzir, kadir arifin, mohd nizam ab rahman, suzana abu bakar, siti rahimah umar, encik mohammad zakie mohd noor.  (2021).  prosedur am operasi standard (sop) pelaksanaan majlis konvokesyen ke-49 universiti kebangsaan malaysia (ukm).  - .  1-15. 

ariff azly muhamed dan mohd nizam ab rahman.  (2021).  penyumberluaran tingkat kecekapan program vaksinasi.  - rencana berita harian.  12. 

mohd faizal bin mat tahir;dzuraidah binti abd. wahab;mohd nizam bin ab rahman;mohd radzi bin abu mansor;nor kamaliana binti khamis.  (2021).  incorporation of static and dynamic condition for the enhancement of anthropometric modes of car seat..  - .  . 

nurul syafiqah zulkefly, hawa hishamuddin, fatin amrina a. rashid, noorhelyna razali, nizaroyani saibani, mohd nizam ab rahman.  (2021).  the effect of transportation disruptions on cold chain sustainability.  - evergreen.  262-270. 

nor kamaliana binti khamis;mohd nizam bin ab rahman;mohd radzi bin abu mansor.  (2021).  enhancing motorcycle sensory conspicuity in malaysia road traffic.  - .  . 

saeid jafarzadeh ghoushchi , shadi dorosti, mohd nizam ab rahman, marzieh khakifirooz, and mahdi fathi.  (2021).  theory-based failure modes and effect analysis for medication errors.  - journal of healthcare engineering.  1-14. 

muhammad idham sabtu, hawa hishamuddin, nizaroyani saibani, mohd nizam ab rahman.  (2021).  a review of environmental assessment and carbon management for integrated supply chain models.  - evergreen.  628-641. 

norhuda salim, mohd nizam ab rahman dan dzuraidah abd. wahab.  (2021).  enhancing green product competitiveness through proactive capabilities of manufacturing firms.  - jurnal kejuruteraan.  78-82. 

mohd nizam ab rahman ariff azly muhamed.  (2021).  penyelesaian strategik kurangkan impak banjir terhadap nyawa, harta.  - rencana berita harian.  12. 

mohd nizam bin ab rahman dan ariff azly muhamed.  (2021).  ambil iktibar kes kartel daging import perkasa sektor halal.  - berita harian.  10. 

siti rahimah umar, mohamad nizam ab rahman, suzana abu bakar, mohd noor faizal mohd nadzir, norlinda omar, mohammad zakie mohd. nor, ain basirah zulkifly, kadir arifin.  (2021).  prosedur operasi standard (sop) pengajaran dan pembelajaran (pdp) bersemuka.  - .  1-10. 

saeid jafarzadeh ghoushchi, kazhal gharibi, elnaz osgooei, mohd nizam ab rahman, mohammad khazaeili.  (2021).  risk prioritization in failure mode and effects analysis with extended swara and moora methods based on z-numbers theory.  - informatica.  41-67. 

siti aishah hadawiah ahmad, mohd nizam ab rahman and ariff azly muhamed.  (2020).  optimal temperature in cold storage for perishable foods.  - proceedings of the 5th na international conference on industrial engineering and operations management.  3449-3456. 

norhuda salim, mohd nizam ab rahman, dzuraidah abd wahab and arif azly muhamed.  (2020).  influence of social media usage on the green product innovation of manufacturing firms through environmental collaboration.  - sustainability.  1-17. 

muhammad zeeshan rafique, mohd nizam ab rahman, nizaroyani saibani & norhana arsad.  (2020).  a trail to milieu research methodology for application of implementation frameworks in manufacturing sector.  - jurnal kejuruteraan.  663-670. 

muhammad idham sabtu, hawa hishamuddin, nizaroyani saibani, mohd nizam ab rahman.  (2020).  a review of environmental assessment on different levels of manufacturer-retailer relationship for integrated supply chain models.  - the 7th mechanical engineering research day (merd'20).  1. 

norliza bt. mohd ali, nizaroyani saibani, hawa hishamuddin, mohd nizam ab rahman & hasan balfaqih.  (2020).  kajian masa untuk memenuhi piawaian masa dalam pemasangan manual pengeluaran televisyen.  - jurnal kejuruteraan.  195-201. 

hawa hishamuddin, mohd azizi abd aziz, noraida azura md darom, mohd nizam ab rahman, dzuraidah abd wahab.  (2020).  dynamics in logistics.  - proceedings of the 7th international conference ldic 2020, bremen, germany.  10. 

muhammad idham sabtu, hawa hishamuddin, nizaroyani saibani, mohd nizam ab rahman.  (2020).  a review of environmental assessment on different levels of manufacturer-retailer relationship for integrated supply chain models.  - proceedings of mechanical engineering research day 2020.  35-36. 

hernadewita, evan haviana, mohd nizam ab rahman, hendra.  (2020).  analysis of reducing waste on defective rubber products in the magnetic disc drive industry.  - advances in science, technology and engineering systems journal.  355-360. 

mohd noor hanif mohd rosdi, wan hasrulnizzam wan mahmood, mohd nizam ab rahman, muhammad ashlyzan razik, seri rahayu kamat.  (2020).  fuzzy arrangement of manufacturing sustainability practices priority level for malaysian industry 4.0 revolution.  - technology reports of kansai university.  5479-5494. 

hawa hishamuddin dzuraidah abd wahab mohd nizam ab rahman ruhul amin sarker.  (2020).  analysis of supply disruption effects on greenhouse gas emission levels from transportation activities in supply chain systems.  - .  1-7. 

saeid jafarzadeh ghoushchi, mohd nizam ab rahman, diba raeisi, elnaz osgooei and majid jafarzadeh ghoushji.  (2020).  integrated decision making approach based on swara and gra methods for the prioritization of failures in solar panel systems under z information.  - symmetry.  1-22. 

hawa binti hishamuddin;dzuraidah binti abd. wahab;mohd nizam bin ab rahman.  (2020).  analysis of supply disruption effects on greenhouse gas emission levels from transportation activities in supply chain systems.  - .  . 

noraini mohd razali and mohd nizam ab rahman.  (2020).  value stream mapping a tool to detect and reduce waste for a lean manufacturing system.  - proceedings of the international manufacturing engineering conference & the asia pacific conference on manufacturing systems.  266-271. 

muhammad saad amjad, muhammad zeeshan rafique, mohd nizam ab rahman, mansoor ali, zaheer, syed mustafa haider.  (2020).  research aspects for methodology design.  - international journal of recent technology and engineering.  1987-1991. 

f., mohamad hamzah, m.n., abd rashid, m. n., ab rahman, m.s., rasul,.  (2019).  rasch model analysis for evaluating validity and reliability of authentic learning instruments in malaysian polytechnics.  - international journal of innovation, creativity and change.  51-62. 

muhammad zeeshan rafique, mohd nizam ab rahman, nizaroyani saibani and norhana arsad.  (2019).  a systematic review of lean implementation approaches: a proposed technology combined lean implementation framework.  - total quality management & business excellence.  . 

abdul shukor, j., jamian, r., ab rahman, m.n..  (2019).  advanced engineering for processes and technologies.  - .  9. 

wan mohd hirwani bin wan hussain;rosilah binti hassan;mohd nizam bin ab rahman;abu hanifah bin ayob;nasuha binti nordin;sufian bin jusoh.  (2019).  innovation management software (ims) – analyzing outcome innovation from ukm.  - .  1-6. 

mohd nizam bin ab rahman.  (2019).  designing green best practices under collective extended enterprise of cold chain supply networks.  - research bulletin innovate faculty of engineering and built environment.  16. 

raden achmad chairdino leuveano, mohd nizam ab rahman, wan mohd faizal wan mahmood and chairul saleh.  (2019).  integrated vendor buyer lot sizing model with transportation and quality improvement consideration under just in time problem.  - mathematics.  944-969. 

ruzanita mat rani, wan rosmanira ismail & mohd nizam ab. rahman.  (2019).  pengagihan optimum : operator syarikat pembuatan makanan perusahaan kecil dan sederhana.  - .  151. 

omar sabbagh, mohd nizam ab rahman, wan rosmanira ismail, wan mohd hirwani wan hussain.  (2019).  the impact of tqm practices on key performance indicators: empirical evidence from automotive dealerships.  - e&m economics and management.  115-128. 

norhuda salim, mohd nizam ab rahman, dzuraidah abd wahab.  (2019).  a systematic literature review of internal capabilities for enhancing eco-innovation performance of manufacturing firms.  - journal of cleaner production.  . 

ariff azly muhamed, mohd nizam ab rahman, firdaus mohd hamzah, che rosmawati che mohd zain, suhaiza zailani.  (2019).  the impact of consumption value on consumer behaviour: a case study of halal-certified food supplies.  - british food journal.  2951-2966. 

muhammad zeeshan rafique, salman mumtaz, mohd nizam ab rahman, imran afzal mughal, aamir khan, syed mustafa haider.  (2019).  wastes in lean production systems.  - international journal of innovative technology and exploring engineering.  1823-1827. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, zinatul ashiqin zainol.  (2018).  from university to industry: problem challenges commercialization nanotechnology.  - information.  . 

ruhizan bt. mohammad yasin;madeline berma;kamaruzzaman sopian;fariza binti khalid;mohd nizam bin ab rahman.  (2018).  program: rural transformation through net neural renewable energy sustainable community. sub projek: development and implementation of net neutral renewable energy model for rural education & social a.  - .  . 

wan mohd hirwani bin wan hussain;zinatul ashiqin binti zainol;mohd nizam bin ab rahman.  (2018).  pengkomersilan hasil penyelidikan universiti di malaysia dengan menggunakan pemasaran secara online (atas talian).  - .  . 

m.s. hassan, z. ebrahim, w.h.w mahmood and m.n.a rahman.  (2018).  factors influencing enterprise resource planning system: a review.  - journal of advanced manufacturing technology.  . 

tatbita titin suhariyanto, dzuraidah abd wahab and mohd nizam ab. rahman.  (2018).  product design evaluation using life cycle assessment and design for assembly: a case study of a water leakage alarm.  - sustainability.  . 

nur farhana mustaffa, hawa hishamuddin, nuramilawahida mat ropi, nizaroyani saibani, mohd nizam ab rahman.  (2018).  assessing supply chain risk management practices in manufacturing industries in malaysia.  - jurnal kejuruteraan.  17-22. 

loh wei lie, nurhasyimah abd aziz, dzuraidah abd wahab, mohd nizam ab rahman and che husna azhari.  (2018).  enhancing remanufacturing efficiency in malaysia through a knowledge support system: a case study of brake callipers.  - international journal of industrial and systems engineering.  451-467. 

farah hafizah hamka, nizaroyani saibani, mohd nizam ab rahman, hawa hishamuddin, zainuddin sajuri, zambri harun.  (2018).  development of a physical simulation game in global supply chain issues.  - prosiding peka 2017. k-novasi pengajaran dan pembelajaran ukm 2018: pendidikan 4.0: graduan kalis masa depan.  . 

farah hafizah hamka, nizaroyani saibani, mohd nizam ab rahman, zambri harun, hawa hishamuddin.  (2018).  development of a physical simulation game in global supply chain issues.  - international journal of engineering and technology.  . 

nizaroyani binti saibani;dzuraidah binti abd. wahab;rizauddin bin ramli;mohd nizam bin ab rahman.  (2018).  criteria mapping of psychomotor domain and production and operations management (pom) concepts in teaching, learning and industrial training.  - .  . 

ruzanita mat rani, wan rosmanira ismail and mohd nizam ab rahman.  (2018).  a min-max operator allocation formulation, computer simulation and dea cross-efficiency in determining the optimal operator allocation.  - advanced science letters.  . 

wan mohd hirwani wan hussain, zinatul ashiqin zainol, mohd nizam ab rahman.  (2018).  augmented reality games (arg): ethical and legal issue playing pokemon go in malaysia.  - international journal of civil engineering and technology.  . 

mahmud, f., deros, b. m., wahab, d. a., ab rahman, m. n., & ramlan, r..  (2017).  critical success factors for benchmarking implementation in oil palm industry.  - international journal of advanced and applied sciences.  125-129. 

omar sabbagh, mohd nizam ab rahman, wan rosmanira ismail & wan mohd hirwani wan hussain.  (2017).  methodology implications in automotive product service systems: a systematic literature review.  - total quality management & business excellence.  1632-1668. 

ruhizan m. yasin, mazzlida mat deli, siti mariam dasman, fariza khalid, m.nizam abd.rahman.  (2017).  charting a model of life long learning centre for sustainable living of indigenous community: voices from the ground.  - man in india.  305-319. 

omar sabbagh, mohd nizam ab rahman, wan rosmanira ismail & wan mohd hirwani wan hussain.  (2017).  the moderation influence of warranty on customer satisfaction`s antecedents: an empirical evidence from automotive dealerships.  - the service industries journal.  381-407. 

t.t. suhariyanto, d.a. wahab, m.n. ab. rahman.  (2017).  multi-life cycle assessment for sustainable products: a systematic review.  - journal of cleaner production.  677-696. 

nur syazwani mohd nawi, baba md deros, norani nordin, mohd nizam ab rahman, ezrin hani sukadarin.  (2017).  critical factors for oil palm plantation workers acceptance and use of mechanization technovation tools.  - pressacademia procedia.  . 

muhammad syahid hasan; zuhriah ebrahim; wan hasrulnizzam wan mahmood; mohd nizam ab rahman.  (2017).  decision support system classification and its application in manufacturing sector: a review.  - jurnal teknologi.  153-163. 

chairul saleh, afifuddin thoif, raden achmad chairdino leuveano, mohd nizam ab rahman.  (2016).  assessment and decision making scenario of carbon emission in sugar industry based on energy consumption using system dynamics.  - journal of engineering science and technology.  56-64. 

roszilah hamid, norhana arshad, badariah bais, firdaus mohd hamzah, nizaroyani saibani, shahrom md zain, et al..  (2016).  memikir semula pengajaran dan mereka bentuk semula pembelajaran.  - prosiding peka2015 k-novasi pengajaran dan pembelajaran (pendidikan kejuruteraan dan alam bina).  1-301. 

ab rahman, m. n., mohamed, m. s., wahab, d. a., saibani, n. and rafique, m. z..  (2016).  relationship between the critical factors for success in training service quality in ukm.  - pertanika journal of social sciences & humanities.  219-228. 

haris jamaluddin, jaharah a. ghani, baba md deros, mohd nizam ab rahman and rizauddin ramli.  (2016).  quality improvement using taguchi method in shot blasting process.  - journal of mechanical engineering and sciences.  2201-2214. 

ibrahim, m. z., ab rahman, m. n., mohammad yasin, r., ramli, r. and awheda, a..  (2016).  customer focus practice among skills training institutions in malaysia and the performance of organisations.  - pertanika journal of social sciences & humanities.  205-218. 

mohd nizam ab rahman, raden achmad chairdino leuveano, fairul azni bin jafar, chairul saleh, baba md deros, wan mohd faizal wan mahmood, wan hasrulnizzam wan mahmood.  (2016).  incorporating logistic costs into a single vendor buyer jels model.  - applied mathematical modelling.  10809-10819. 

rafique m.z., ab rahman m.n., saibani n., arsad n., saadat w..  (2016).  rfid impacts on barriers affecting lean manufacturing.  - industrial management and data systems.  1585-1616. 

jafarzadeh-ghoushchi s., rahman m.n.a..  (2016).  performance study of artificial neural network modelling to predict carried weight in the transportation system.  - international journal of logistics systems and management.  200-212. 

zain r.m., ab. rahman m.n., ramli a., nopiah z.m., saibani n..  (2016).  using measures of agreement to evaluate a chronic problem of congestion in the empty container depots.  - international review of management and marketing.  843-850. 

sabbagh o., rahman m.n.a., ismail w.r., hussain w.m.h.w..  (2016).  research methodology implications in automotive product-service context: a literature review.  - jurnal teknologi.  7-14. 

dr. wan rosmanira ismail, prof. madya dr. liong choong yeun, prof. madya dr. mohd nizam bin ab rahman, ruzanita binti mat rani & mardhiah binti baharin.  (2016).  laporan teknik reka bentuk, pembangunan dan penilaian proses umpukan operator dalam sistem pembuatan intensif buruh bagi perusahaan kecil dan sederhana.  - .  . 

nurul affina andi, wan mohd faizal wan mahmood, fadzli ibrahim, mohd nizam ab rahman.  (2016).  measurement of mass and size of soot emission from direct injection diesel engine.  - proceedings of 5th international technical conference, "innovative and collaborative interdisciplinary researches and practices towards energy, environment and smart living", (itc2016).  219-226. 

nur syazwani mohd nawi, baba md deros, mohd nizam ab. rahman, ezrin hani sukadarin, norani nordin.  (2016).  malaysian oil palm workers are in pain: hazards identification and ergonomics related problems.  - malaysian journal of public health medicine.  50-57. 

muhammad zeeshan rafique, mohd nizam ab rahman, nizaroyani saibani, norhana arsad, imran afzal mughal, sohaib hanif, mahwish zafar.  (2016).  quality check for customer benefit in bus transport system through statistical control charts and gauge r & r.  - international journal of applied engineering research.  101-104. 

mohd norulhisham abd rashid, firdaus mohamad hamzah, mohd nizam ab rahman & mohamad sattar rasul.  (2016).  model authentic learning bagi program kejuruteraan politeknik malaysia: aplikasi interpretive structural modelling.  - malaysian journal of learning and instruction.  227-251. 

abdulghadar awheda mohd nizam ab rahman rizauddin ramli haslina arshad.  (2016).  factors related to supply chain network members in smes.  - journal of manufacturing technology management.  312 - 335. 

nur syazwani mn, baba md, mohd nizam ar, ezrin hani s, norani n, shamsul bahri mt, shahriman ab, azmin sham r.  (2016).  ergonomic risk assessment of manual handling tools by oil palm collectors and loaders.  - malaysian journal of public health medicine.  56-60. 

mohd nizam ab rahman, mahmood doroodian, yusniza kamarulzaman, norhamidi muhamad.  (2015).  designing and validating a model for measuring sustainability of overall innovation capability of small and medium-sized enterprises.  - sustainability.  537-562. 

mohd nizam ab rahman, rosmaizura mohd zain, afis mohd alias, zulkifli mohd nopiah.  (2015).  statistical process control: best practices in small and medium enterprises.  - maejo international journal of science and technology.  193-208. 

ilyana abdullah, wan hasrulnizzam wan mahmood, muhammad hafidz fazli md fauadi, mohd nizam ab rahman.  (2015).  benefits of regulatory and voluntary sustainability standards compliance: a review on malaysian palm oil.  - journal of advanced manufacturing technology.  1-12. 

baba bin md deros, jaharah bt. a ghani, dzuraidah binti abd. wahab, ir. ahmad rasdan bin ismail, mohd nizam bin ab rahman, dr. dian darina indah binti saruis.  (2015).  development of an ergonomic car operation and control pedal.  - .  . 

muhammad zeeshan rafique, mohd nizam ab rahman, nizaroyani saibani, norhana arsad, bakhtawar khan khatak, muhammad farroq ghauri.  (2015).  quality improvements and increase in electricity generation through anaerobic digestion in rural areas. a feasibility report.  - jurnal teknologi.  127-130. 

norashikin rahman, baba md deros*, mohd nizam ab rahman, jaharah a. ghani, chairul saleh.  (2015).  a study benchmarking understanding, knowledge and implementation barriers in malaysian oil palm industry.  - jurnal teknologi (sciences & engineering).  65-70. 

ilyana abdullah, wan hasrulnizzam wan mahmood, muhammad hafidz fazli md fauadi, mohd nizam ab rahman and fathiyah ahmad @ ahmad jali.  (2015).  sustainability in malaysian palm oil: a review on manufacturing perspective.  - polish journal of environmental studies.  1463-1475. 

w. m. f. w. mahmood, m. a. ariffin, z. harun, n. a. i. md. ishak, j. a. ghani, m. n. ab. rahman.  (2015).  characterisation and potential use of biochar from gasified oil palm wastes.  - journal of engineering science and technology.  45-54. 

chairul saleh, raden achmad chairdino leuveano, mohd nizam ab rahman, baba md deros, nur rachman dzakiyullah.  (2015).  prediction of co2 emissions using an artificial neural network: the case of the sugar industry.  - advanced science letters.  3080-3084. 

azmi hassan, chairul saleh, baba md deros, mohd nizam ab rahman , raden achmad chairdino leuveano, andra adiyoga.  (2015).  parameter optimization of vmi system in a manufacturer and multi retailer using genetic algorithm.  - advanced materials research, trans tech publications, switzerland.  622-626. 

malihe manzouri, mohd nizam ab rahman, haslina arshad.  (2015).  issues in supply chain implementation. a comparative perspective.  - international journal of information systems and supply chain management.  85-102. 

rosmaizura mohd zain, mohd nizam ab. rahman, nizaroyani saibani, zulkifli mohd nopiah, ainon ramli, norzaliha jusoh.  (2015).  exploring the delays at empty container off-dock depots: useful perceptions by stakeholders.  - management 2015, 5(5): 148-159.  148-159. 

mohd nizam ab rahman, raden achmad chairdino leuveano, fairul azni bin jafar, chairul saleh, and baba md deros.  (2015).  total cost reduction using a genetic algorithm for multi-vendor and single manufacturer.  - international journal of mathematical models and methods in applied sciences.  566-575. 

rusalbiah che mamat*, baba md deros, mohd nizam ab rahman,muhamad khalil omar, shukriah abdullah.  (2015).  soft lean practices for successful lean production system implementation in malaysia automotive smes: a proposed framework.  - jurnal teknologi.  141-150. 

n s m nawi, b m deros, m n a rahman, e h sukadarin, n nordin, s b m tamrin, s a bakar, m l norzan.  (2015).  conceptual design of semi-automatic wheelbarrow to overcome ergonomics problems among palm oil plantation workers.  - 3rd international conference of mechanical engineering research (icmer 2015) iop publishing, iop conf. series-materials science and engineering.  1-8. 

muhamad zaki yusup, wan hasrulnizzam wan mahmood, mohd rizal salleh, mohd nizam ab rahman.  (2015).  the implementation of cleaner production practices from malaysian manufacturers` perspectives.  - journal of cleaner production.  659-672. 

muhammad idham sabtu, nizaroyani saibani, rizauddin ramli, mohd nizam ab rahman.  (2015).  multi-criteria decision making for reverse logistic contractor selection in e-waste recycling industry using polytomous rasch model.  - jurnal teknologi.  119-125. 

zunuwanas mohamad,wan rosemehah wan omar,ruhizan mohammad yasin & mohd nizam ab rahman.  (2015).  penambahbaikan pengurusan makmal kejuruteraan politeknik.  - jurnal teknikal & sains sosial (jtss).  56-67. 

haris jamaluddin, jaharah a. ghani, mohd nizam ab. rahman, baba md. deros.  (2014).  development of training kit for learning taguchi method and design of experiments.  - jurnal teknologi.  68(4): 19-25. 

a.n.m. rose, b.m. deros and m.n.a. rahman.  (2014).  critical success factors for implementing lean manufacturing in malaysian automotive industry.  - research journal of applied sciences, engineering and technology.  1191-1200. 

zunuwanas mohamad, wan rosemehah wan omar, ruhizan mohamad yasin, mohd nizam ab rahman.  (2014).  polytechnic framework for engineering laboratory management.  - proceedings 10th conference of aasvet (asian academic society for vocational education and training- tokyo, japan).  149-154. 

mohd zuhdi ibrahim, mohd nizam ab rahman & ruhizan m.yasin.  (2014).  determining factors of students satisfaction with malaysian skills training institutes.  - international education studies.  7(6)2014:9-24. 

suhartini mohd jainury, rizauddin ramli, mohd nizam ab rahman, azhari omar.  (2014).  integrated set parts supply system in a mixed-model assembly line.  - computers & industrial engineering.  266-273. 

mohd nizam ab. rahman, saeid jafarzadeh-ghoushchi, dzuraidah abd. wahab, majid jafarzadeh-ghoushji.  (2014).  artificial neural network modeling studies to predict the amount of carried weight by iran khodro transportation system.  - life science journal.  146-154. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, zinatul ashiqin zainol and noor inayah yaakub.  (2014).  mechanism and government initiatives promoting innovation and commercialization of university invention.  - pertanika journal of social science and humanities.  22(S) 131-148. 

mahmood doroodian, mohd nizam ab rahman, yusniza kamarulzaman, and norhamidi muhamad.  (2014).  designing and validating a model for measuring innovation capacity construct.  - advances in decision sciences.  1-11. 

abdullah ismail, jaharah a. ghani, mohd nizam ab rahman, baba md deros, and che hassan che haron.  (2014).  application of lean six sigma tools for cycle time reduction in manufacturing: case study in biopharmaceutical industry.  - arabian journal for science and engineering.  1449-1463. 

mohd nizam ab. rahman, noor suhana mohd zubir, raden achmad chairdino leuveano, jaharah a. ghani and wan mohd faizal wan mahmood.  (2014).  reliability study of solder paste alloy for the improvement of solder joint at surface mount fine-pitch components.  - materials.  7706-7721. 

rusalbiah che mamat, baba md deros, mohd nizam abd rahman and norina ahmad jamil.  (2014).  employees perception on lean production system implementation- a case of malaysia automotive component manufacturer.  - applied mechanics and materials / trans tech publications, switzerland.  1032-1037. 

malihe manzouri, mohd nizam ab-rahman, che rosmawati che mohd zain and ezad azraai jamsari.  (2014).  increasing production and eliminating waste through lean tools and techniques for halal food companies.  - sustainability.  9179-9204. 

raden achmad chairdino leuveano,fairul azni bin jafar,chairul saleh, mohd razali bin muhamad, mohd nizam abd rahman.  (2014).  incorporating transportation cost into joint economic lot size for single vendor-buyer.  - journal of software.  1313-1323. 

muhammad afif ariffin, wan mohd faizal wan mahmood, zambri harun, and nurul atiqah izzati md ishak, mohd nizam ab rahman, jaharah a ghani.  (2014).  palm wastes biochar as fuel, soil amendment and activate carbon.  - international technical conference 2014 (itc 2014) / chung ang university, seoul, korea.  315-322. 

ruzanita mat rani, wan rosmanira ismail, and mohd nizam ab. rahman.  (2014).  operators evaluation and allocation in sme`s food manufacturing company using analytical hierarchy process and computer simulation.  - international journal of applied physics and mathematics.  215-222. 

rahim jamian, mohd nizam ab rahman, baba md deros, mohd saiful mohamed, nik zainuddin nik ismail.  (2014).  a conceptual approach of 5s to improving quality and environmental performance of malaysian oil palm dealers.  - jurnal teknologi.  65-73. 

suhartini mohd jainury, rizauddin ramli, mohd nizam ab rahman and azhari omar.  (2013).  design concepts in set parts supply implementation.  - research journal of applied sciences, engineering and technology.  6(19):3682-3685. 

noor hidayah abu, baba md deros, mohd nizam ab rahman, mohd fitri mansor.  (2013).  a study on malaysian food and beverage manufacturing smes practices of pre-development process.  - applied mechanics and materials.  . 

malihe manzouri, mohd nizam ab rahman, farshad nasimi, haslina arshad.  (2013).  a model for securing sharing information across the supply chain.  - american journal of applied sciences.  10(3):253-258. 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros, kamruzaman jusoff, adi saptari, zuhriah ebrahim, al amin mohamed sultan, mohd hadzley abu bakar, sivarao subramonian, zanariah jano.  (2013).  manufacturing performance in green supply chain management.  - world applied sciences journal.  21:76-84. 

ahmad nasser mohd rose, baba md deros and mohd nizam abd rahman.  (2013).  lean manufacturing practices implementation in malaysians sme automotive component industry.  - applied mechanics and materials.  . 

a.n.m. rose, b. md. deros and m.n. ab. rahman.  (2013).  lean manufacturing perceptions and actual practice among malaysian sme`s in automotive industry.  - international journal of automotive and mechanical engineering (ijame).  7:820-829. 

a. n. m. rose, b. md. deros and m. n. ab. rahman.  (2013).  a study on lean manufacturing implementation in malaysian automotive component industry.  - international journal of automotive and mechanical engineering (ijame).  8:1467-1476. 

rahim jamian, mohd nizam ab rahman, baba md deros, nik zainuddin nik ismail.  (2013).  penggabungan konsep 5s dan 3r untuk menambahbaik prestasi alam sekitar syarikat pembuatan pks ke arah pembangunan lestari.  - jurnal teknologi.  17-28. 

ruhizan m. yasin, zunuwanas mohamad, mohd nizam ab rahman &mohd sattar rasul.  (2013).  development of quality management systems for polytechnic engineering laboratory.  - recent advances in educational technologies : proceedings of the 4th international conference on education and educational technologies (eet`13).  . 

jaharah a. ghani, haris jamaluddin, mohd nizam ab. rahman and baba md. deros.  (2013).  philosophy of taguchi approach and method in design of experiment.  - asian journal of scientific research.  6(1):27-37. 

wan mohd hirwani wan hussain, mohd nizam ab rahman,zinatul a. zainol and noor inayah yaakub.  (2012).  utilizing internet to support innovation, technology transfer process and commercialization of university research.  - 2012 tuanku jaafar law conference and workshop:academic entrepreneurship and university start ups.  . 

wan mohd hirwani wan hussain, mohd nizam abdul rahman, jaharah a. ghani, wan kamal mujani, zinatul ashiqin zainol and noor inayah yaakub.  (2012).  planning production and control: design of experiments (doe) in legal service industry.  - research journal of applied sciences, engineering and technology.  4(12):1684-1689. 

jaharah a. ghani, haris jamaluddin, rizauddin ramli, mohd nizam ab rahman, baba md deros and che hassan che haron.  (2012).  doe insolving industrial problem: case study of the application of taguchi method in riveting process.  - proceedings of the 2012 international conference on industrial engineering and operations management,istanbul turkey.  . 

suhartini mohd jainury, rizauddin ramli,mohd nizam abd rahman,jaharah abd ghani, dzuraidah abd wahab and azhari omar.  (2012).  implementation of set parts system in malaysian automotive industry.  - proceedings of the 2012 international conference on industrial engineering and operations management istanbul, turkey,.  . 

zunuwanas mohamad, ruhizan mohammad yasin, mohd nizam ab rahman.  (2012).  laboratory quality management requirements of engineering at the polytechnics ministry of higher education malaysia.  - journal of education and learning.  6(1):59-64. 

ruhizan m.yasin, zunuwanas mohamad, mohd nizam ab. rahman, mohamad hisyam mohd hashim.  (2012).  the formation of indicators on engineering laboratory management.  - international education studies.  5(5):212-217. 

wan mohd hirwani wan hussain, mohd nizam ab rahman,zinatul a. zainol and noor inayah yaakub.  (2012).  government initiatives and mechanism in promoting innovation and commercialization of university inventions.  - 2012 tuanku jaafar law conference and workshop:academic entrepreneurship and university start ups.  . 

saeid g. jafarzadeh, mohd nizam ab rahman, dzuraidah abd wahab.  (2012).  optimization of supply chain management based on response surface methodology: a case study of iran khodro.  - world applied sciences journal.  20(4):620-627. 

saeid g. jafarzadeh, mohd nizam ab rahman, dzuraidah abd wahab.  (2012).  forecasting capabilities of spare part production with artificial neural networks model in a supply chain.  - world applied sciences journal.  20(5):674-678. 

noor hidayah abu, baba md deros, dzuraidah abd wahab, mohd nizam ab rahman, mohd fitri mansor.  (2012).  the pre-development process implementation of product innovation: a malaysian food and beverage manufacturing smes survey.  - international journal of business and management science.  5(1):39-49. 

nordin n., md deros b., wahab d.a., ab. rahman m.n..  (2012).  a framework for organisational change management in lean manufacturing implementation.  - international journal of services and operations management.  12(1):101-117. 

wan kamal mujani noor inayah yaakub wan mohd hirwani wan hussain , zinatul ashiqin zainol.  (2012).  current islamic theological discourse on middle class.  - advances in natural and applied sciences.  6(6): 973-979. 

baba md deros *, nizaroyani saibani, bahrim yunos, mohd nizam ab. rahman, jaharah a. ghani.  (2012).  evaluation of training effectiveness on advanced quality management practices management practices.  - procedia social and behavioral sciences - international conference on teaching and learning in higher education (ictlhe 2012) in conjunction with rcee & rhed 2012.  . 

mohd nizam ab rahman.  (2012).  the effective implementation of global supply chain management in small to medium-sized companies in malaysia: an empirical study.  - international journal of management.  29(3):274-287. 

ahmad rasdan ismail, shashi kumar s a karagaratnan, rozli zulkifli, baba md deros, mohd nizam abdul rahman.  (2012).  a review on thermal comfort assessment in malaysian industries.  - jurnal teknologi (sciences & engineering).  59:7-11. 

norashikin rahman, baba md. deros, mohd. nizam ab rahman.  (2012).  a study on benchmarking technique understanding and knowledge in malaysia palm oil milling industry.  - jurnal teknologi (sciences & engineering).  59:73-76. 

noor hidayah abu, baba md deros, dzuraidah abd wahab, mohd nizam ab rahman, norani nordin.  (2012).  a study on the difference between radical innovation and incremental improvement in pre-development practices of npd projects.  - jurnal teknologi (sciences & engineering).  59:123-127. 

fatimah mahmud, baba md deros, dzuraidah abdul wahab, mohd nizam ab rahman.  (2012).  a survey on the barriers of benchmarking implementation in malaysia oil palm industry.  - jurnal teknologi (sciences & engineering).  59:47-54. 

baba mohd deros, tan jun, mohd nizam abd rahman.  (2012).  benchmarking technique in lean manufacturing (5s) practice.  - jurnal teknologi (sciences & engineering).  59:111-114. 

norani nordin, baba md deros, dzuraidah abdul wahab, mohd nizam ab. rahman.  (2012).  validation of lean manufacturing implementation framework using delphi technique.  - jurnal teknologi (sciences & engineering).  59:1-6. 

suhartini mohd jainury, rizauddin ramli, mohd nizam ab rahman, azhari omar.  (2012).  an implementation of set parts supply system in the malaysian automotive industry.  - jurnal teknologi (sciences & engineering).  59(2):19-24. 

rahim jamian, mohd nizam ab rahman, baba md deros, nik zainuddin nik ismail.  (2012).  a conceptual model towards sustainable management system based upon 5s practice for manufacturing smes.  - asia pacific journal of operations management.  1(1):19-31. 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros.  (2012).  green supply chain management in malaysian aero composite industry.  - jurnal teknologi (sciences & engineering).  59:13-17. 

mohd azhar sahwan, mohd nizam ab rahman, baba md deros.  (2012).  barriers to implement lean manufacturing in malaysian automotive industry.  - jurnal teknologi (sciences & engineering).  59:107-110. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, wan kamal mujani, zinatul ashiqin zainol and noor inayah yaakub.  (2012).  internet marketing strategy for malaysia medical practitioners.  - journal of medical marketing.  12(1):13-21. 

t.f. go, d.a. wahab, m.n.ab. rahman r. ramli, a. hussain.  (2012).  genetically optimised disassembly sequence for automotive component reuse.  - expert systems with applications.  39(5):5409-5417. 

hussain, w.m.h.w., rahman, mohd.n.a., yaakub, n.i., zainol, z.a., mujani, w.k..  (2011).  embedding the importance of commercialisation of university`s research in the engineering education in malaysia.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010 (applied mechanics and materials ); chongqing.  . 

m.h.m. haniff, a.r. ismail, b.m. deros, m.n.a. rahman and k. kardigama.  (2011).  the taguchi approach in optimizing environmental factors affecting productivity in the automotive industry.  - international journal of automotive and mechanical engineering (ijame).  3:306-317. 

mohd nizam ab. rahman, harlina wasilan, baba md deros and jaharah a. ghani.  (2011).  barriers of scm in smes.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing(applied mechanics and materials).  . 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros and a.g. jaharah.  (2011).  improving production line performance: a case study.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros and ahmad rasdan ismail.  (2011).  product and vendor development programme in encouraging supply chain management: a case study.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010 (applied mechanics and materials); chongqing.  . 

norani nordin, baba md deros, dzuraidah abdul wahab,
mohd nizam ab. rahman.  (2011).  managing change in lean manufacturing implementation.  - 2011 international conference on advanced design and manufacturing engineering, adme 2011; guangzhou (advanced materials research).  . 

noor hidayah abu, baba md deros, dzuraidah abd wahab, mohd nizam ab rahman.  (2011).  practice of csfs for the pre-development process in new product innovation processes at smes: questionnaire development.  - 2011 international conference on advanced design and manufacturing engineering, adme 2011; guangzhou (advanced materials research).  . 

mohd nizam ab rahman, harlina wasilan, baba md deros & nizaroyani saibani.  (2011).  halangan kepada keberkesanan pelaksanaan rantaian bekalan di syarikat pembuatan perindustrian kecil dan sederhana.  - jurnal teknologi.  56:81-98. 

norani nordin, baba md deros, dzuraidah abdul wahab, mohd nizam ab. rahman.  (2011).  organisational change management framework for lean manufacturing implementation.  - proceedings of the 15th international conference in iso9000 and tqm (icit 2011).  . 

noor hidayah abu, baba md deros, dzuraidah abd wahab, mohd nizam ab rahman.  (2011).  csfs for pre-development implementation of new product development in small and medium-sized enterprises.  - 2011 international conference on materials and products manufacturing technology, icmpmt 2011; chengdu.  . 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros, husiah mazli.  (2011).  maintenance management system for upstream operations in oil and gas industry: a case study.  - international journal of industrial and systems engineering.  9(3):317-329. 

j. a. ghani, k. othman, m. n. a. rahman, b. m. deros and c. h. c. haron.  (2011).  machined surface of fcd 700 ductile cast iron in a dry turning environment using carbide tools.  - international journal of mechanical and materials engineering.  6(3):362-366. 

n.h.abu, b.md.deros, d.abd.wahab, m.n.ab.rahman, n.nordin.  (2011).  a study of pre-development implementation in malaysian manufacturing smes.  - regional postgraduate conference- epc2011.  . 

baba m. d., norani n., lim a.w. and mohd nizam a.r..  (2011).  critical success factors for six sigma deployment in manufacturing companies in malaysia.  - asian international journal of science and technology in production manufacturing engineering.  4(3):13-23. 

wan mohd hirwani wan hussain, wan kamal mujani, mohd nizam ab rahman, noor inayah yaakub, zinatul ashiqin zainol, kamaruzaman jusoff.  (2011).  internet marketing strategy for commercialisation of global university research: an exploratory analysis.  - middle-east journal of scientitif research.  7:93-102. 

ahmad rasdan ismail, norfadzilah jusoh, mohd. nizam ab. rahman, rozli zulkifli and kumaran kardigama.  (2011).  thermal comfort assessment at parcel and logistic industry: a field study in malaysia.  - the institution of engineering journal.  72(3):36-40. 

noor inayah yaakub, wan mohd hirwani, mohd nizam ab rahman, zinatul ashiqin zainol, wan kamal mujani, ezad azraai jamsari, adibah sulaiman, kamaruzaman jusoff.  (2011).  challenges for commercialization of university research for agricultural based invention.  - world applied sciences journal.  12(2):132-138. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, zinatul ashiqin zainol, wan kamal mujani and noor inayah yaakub.  (2011).  commercialisation of university research into engineering education.  - the social sciences.  6(6):502-506. 

wan mohd hirwani wan hussain, noor inayah yaakub, mohd nizam ab rahman, zinatul ashiqin zainol, wan kamal mujani, kamaruzaman jusoff.  (2011).  transforming university`s mission and vision statement for commercialization of university`s research in malaysia.  - middle east journal of scientific research.  7:112-120. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, wan kamal mujani, zinatul ashiqin zainol, noor inayah yaakub.  (2011).  undue influence in the commercialization of university research.  - international business management.  5(6):331-338. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, wan kamal mujani, zinatul ashiqin zainol, noor inayah yaakub.  (2011).  six sigma principles for malaysian lawyers.  - australian journal of basic and applied sciences.  5(9):1896-1900. 

wan mohd hirwani wan hussain, mohd nizam ab rahman, wan kamal mujani, noor inayah yaakub, zinatul ashiqin zainol.  (2011).  legal marketing online: lawyers facilitate in commercialization of malaysian university research.  - international business management.  5(6):339-344. 

wan hasrulnizzam wan mahmood, nurulain mat tahar, mohd nizam ab rahman, baba md deros.  (2011).  supply chain enhancement through product and vendor development programme.  - journal of modelling in management.  6(2):164-177. 

mostafa a.shokshok, mohd nizam ab rahman, dzuraidah abd wahab.  (2011).  diagnosing culture variables to enable successful tqm implementation in libyan manufacturing companies.  - world applied sciences journal.  12(6):903-911. 

mohd nizam ab rahman, mostafa a shokshok, dzuraidah abd wahab.  (2011).  barriers and benefits of total quality management implementation in libyan manufacturing companies.  - middle east journal of scientific research.  7(4):619-624. 

suhartini mohd jainury, rizauddin ramli, mohd nizam ab rahman, azhari omar.  (2011).  set parts supply system in the malaysian automotive industry.  - 2011 advanced processes and systems in manufacturing (apsim2011).  . 

malihe manzouri, mohd nizam ab rahman, haslina arshad.  (2011).  order management in supply chain: a case study in automotive companies.  - american journal of engineering and applied sciences.  4(3):372-379. 

jamian, r., rahman, m.n.a.b..  (2011).  proposition of framework for quality working environment based on sustainable design in small manufacturing enterprises.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials).  . 

jamaludin, k.r., muhamad, n., rahman, m.n.a., ahmad, s., ibrahim, m.h.i., nor, n.h.m., harun, m.r., daud, m.y.m..  (2011).  multiple performance optimization for the best metal injection molding green compact.  - journal of applied sciences.  11(9):1663-1667. 

mat, k., omar, m.z., osman, s.a., kofli, n.t., abd.rahman, m.n., jamil, m., jamaluddin, n..  (2011).  the effectiveness of industrial training on ukm engineering students.  - kongres pengajaran dan pembelajaran ukm, 2010; tanjung keling, melaka (procedia - social and behavioral sciences).  . 

jamaludin k.r., muhamad n., rahman m.n.ab., ahmad s., ibrahim m.h.i., nor n.h.m..  (2011).  orthogonal array technique for optimizing the sintering parameter of the metal injection molding (mim) compact: best flexure strength.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research).  . 

deros b.m., mohamad d., idris m.h.m., rahman m.n.a., ghani j.a., ismail a.r..  (2011).  cost saving in an automotive battery assembly line using setup time reduction.  - 11th wseas international conference on robotics, control and manufacturing technology (rocom `11).  . 

t.f. go, d.a. wahab, m.n. ab. rahman, r. ramli, c.h. azhari.  (2011).  disassemblability of end-of-life vehicle: a critical review of evaluation methods.  - journal of cleaner production.  19(13):1536-1546. 

baba md deros, tan jun and mohd nizam ab. rahman.  (2011).  a systematic application of benchmarking technique in new product release.  - proceedings 2011 4th ieee international conference on computer science and information technology, 10-13 june, 2011, chengdu, china.  . 

jamaludin k.r., muhamad n., abolhasani h., murtadhahadi, rahman m.n.ab..  (2011).  an influence of a binder system to the rheological behavior of the ss316l metal injection molding (mim) feedstock.  - international conference on advances in materials and processing technologies, ampt 2009; 26 october 2009 through 29 october 2009 (advanced materials research).  . 

deros b.m., mohamad d., idris m.h.m., rahman m.n.a., ghani j.a., ismail a.r.  (2011).  setup time reduction in an automotive battery assembly line.  - international journal of systems applications, engineering & development.  5(5): 618-625. 

mohd nizam ab rahman, malihe manzouri, and haslina arshad.  (2011).  emergence of difficulties among organizations in applying supply chain management.  - 2011 international conference on advanced engineering materials and technology (advanced materials research), aemt 2011.  . 

b.m. deros, j. tan, m.n. ab. rahman and n.a.q.m. daud.  (2011).  an effective approach for benchmarking implementation.  - american journal of engineering and applied sciences.  4(2):288-293. 

d.a. wahab, t.f. go, r. ramli and m.n. ab. rahman.  (2011).  optimisation of disassembly sequence for end-of-life automotive components.  - 21st international conference on flexible automation and intelligent manufacturing.  . 

wan mohd hirwani wan hussain, mohd nizam ab rahman, zinatul ashiqin zainol, wan kamal mujani and noor inayah yaakub.  (2011).  a method for finding investor through internet marketing strategy.  - australian journal of basic and applied sciences.  5(12):1841-1849. 

malihe manzouri, mohd nizam ab rahman, haslina arshad, jaharah a. ghani.  (2011).  cutting down the difficulties of scm implementation: a comparison between iranian and malaysian companies.  - applied mechanics and materials.  . 

mohd nor azmi mohd rodzi, jaharah a.g., eghawail a.m., kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  performance of coated carbide tool in green turning of fcd 700 ductile cast iron.  - proceedings of the international multiconference of engineers and computer scientists 2010, imecs 2010.  . 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hassan che haron, mariyam jameelah ghazali, and mohd nizam ab rahman.  (2010).  online cutting tool wear monitoring using i-kaz method and new regression model.  - advanced materials research.  . 

a.r. ismail, m.h.m. haniff, b.m., m.n.a. rahman, m.z. nuawi, m.r.a. rani.  (2010).  the influence of sound pressure level towards workers` production rate.  - the 3rd regional conference on noise, vibration and comfort.  . 

maslina jamil, mohd zaidi omar, siti aminah osman, norhisham tan kofli, mohd nizam abdul rahman, kamarulzaman mat.  (2010).  competencies achieved through industrial training programme.  - 7th wseas international conference on engineering education (education '10), corfu island, greece.  . 

t.f. go, d.a. wahab, m.n. ab. rahman and r. ramli.  (2010).  a design framework for end-of-life vehicles recovery: optimization of disassembly sequence using genetic algorithms.  - american journal of environmental sciences.  6(4):350-356. 

saeid jafarzadeh ghoushchi, behzad nadi & mohd nizam ab rahman.  (2010).  manufacturing system in feasibility of producing 206's peugeot.  - .  92. 

mohd nor azmi mohd rodzi , jaharah a.g. , eghawail a.m. , kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  iaeng transaction in engineering technologies vol 5.  - .  260-265. 

go, t.f., wahab, d.a., ab. rahman, m.n., ramli, r. and azhari, c.h..  (2010).  disassembly for reuse: implementation in the malaysian automotive industry.  - australian journal of basic and applied sciences.  4(10):4569-4575. 

deros b. m., rahman m. n. ab, ismail a. r., yee l. w. zain r. m..  (2010).  application of statistical process control technique for evaluating machine capability: a case study.  - asian international journal of science and technology in production and manufacturing engineering.  3(1):15-22. 

malihe manzouri, mohd nizam ab rahman, haslina arshad and ahmad rasdan ismail.  (2010).  barriers of supply chain management implementation in manufacturing companies: a comparison between iranian and malaysian companies.  - journal of the chinese institute of industrial engineers.  27(6):456-472. 

mohd nizam ab rahman, rosmaizura mohd zain, suriani abdul rahman & zulkifli mohd nopiah.  (2010).  peningkatan prestasi proses melalui peralatan kualiti berstatistik.  - journal of quality measurement and analysis.  6(1):1-15. 

mohd nizam ab rahman, nor kamaliana khamis, rosmaizura mohd zain, baba md deros and wan hasrulnizzam wan mahmood.  (2010).  implementation of 5s practices in the manufacturing companies: a case study.  - american journal of applied sciences.  7(8):1182-1189. 

khairur rijal jamaludin, norhamidi muhamad, m.n.a. rahman, s. ahmad, m.h.i. ibrahim, n.h.m.nor and m.y.m. daud.  (2010).  application of the grey-taguchi method to the optimization of metal injection molding (mim) process.  - key engineering materials.  . 

deros, b.m., rahman, n., zainal, n.h., mohamad, d. rahman, m.n.a. & ismail, a.r..  (2010).  development of an effective cost management method for malaysian smes.  - proceedings of international conference on industrial engineering and business management (iciebm 2010) yogyakarta - indonesia.  . 

go, t.f., wahab, d.a., ab. rahman, m.n, ramli, r..  (2010).  optimisation of disassembly sequence for reuse using genetic algorithms.  - international conference on design and concurrent engineering (idecon 2010).  . 

norani nordin, baba md deros, dzuraidah abdul wahab3, mohd nizam ab. rahman.  (2010).  cross case comparison of organisational change factors in lean manufacturing implementation.  - proceedings of international conference on industrial engineering and business management (iciebm 2010) yogyakarta - indonesia.  . 

mohd nizam ab rahman, rosmaizura mohd zain, suriani abdul rahman, zulkifli mohd nopiah.  (2010).  peningkatan prestasi proses melalui peralatan kualiti berstatistik.  - journal of quality measurement and analysis.  6(1):1-15. 

wan hasrulnizzam wan mahmood, mohd nizam ab rahman, baba md deros.  (2010).  survey approaches in green supply chain management.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

harlina wasilan, mohd nizam ab rahman, baba md deros & nizaroyani.  (2010).  halangan kepada keberkesanan pelaksanaan rantaian bekalan di syarikat pembuatan pks.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

n. rahman, b.m. deros, m.n.a. rahman.  (2010).  a case study of palm oil mill processing practices.  - regional engineering postgraduate conference (epc) 2010, universiti kebangsaan malaysia.  . 

wan mohd hirwani wan hussain, noor inayah yaakub, mohd nizam abdul rahman, zinatul ashiqin zainol,wan kamal mujani.  (2010).  online legal marketing: how lawyers assist in commercialization of university research.  - 2010 international conference on education and management technology (icemt).  . 

wan mohd hirwani wan hussain. noor inayah yaakub, mohd nizam abdul rahman, zinatul ashiqin zainol, wan kamal mujani.  (2010).  why these two words of undue influence matter in the commercialisation of university research: gentle legal precautions for researchers in commonwealth jurisdictions..  - 2010 international conference on education and management technology (icemt).  . 

wan mohd hirwani wan hussan,noor inayah yaakub, mohd nizam abdul rahman,zinatul ashiqin zainol, wan kamal mujani,.  (2010).  why these two words of undue influence matter in the commercialisation of university research: gentle legal precautions for researchers in commonwealth jurisdictions..  - 2010 2nd ieee international conference on computer technology and development (icctd 2010).  . 

jaharah a. ghani, mohd nor azmi mohd rodzi, mohd zaki nuawi,kamal othman, mohd. nizam ab. rahman, che hassan che haron, and baba md deros.  (2010).  application of taguchi method for analyzing factors affecting the performance of coated carbide tool when turning fcd700 in dry cutting condition.  - aip conference proceedings - international conference on advances in materials and processing technologies. vol. 1315.  . 

ruhizan mohd.yasin, mohd nizam ab. rahman, zunuwanas mohamad,saemah rahman.  (2010).  developing framework for intelligent laboratory management.  - procedia social and behavioural sciences.  . 

k.r. jamaludin, n. muhamad, m.n.a. rahman, murtadhahadi, s. ahmad, m.h.i. ibrahim, n.h.m. nor.  (2010).  rheological investigation of water atomized metal injection molding (mim) feedstock for processibility prediction.  - advanced materials research.  . 

mohd zaidi omar, kamarulzaman mat, siti aminah osman, norhisham tan kofli, mohd nizam abd.rahman, maslina jamil, nordin jamaluddin.  (2010).  keberkesanan latihan industri ke atas pelajar fakulti kejuruteraan dan alam bina 2009.  - kongres pengajaran dan pembelajaran ukm2010.  . 

mohd nizam ab rahman, rosmaizura mohd zain, nizaroyani saibani, suriani abdul rahman & zulkifli mohd nopiah.  (2010).  halangan pelaksanaan spc: satu pandangan praktikal daripada syarikat pengusaha kecil dan sederhana.  - journal of quality measurement and analysis.  6(2):1-17. 

mohd nizam ab rahman, ruhizan mohd yasin, kamaruzzaman sopian, ahmad rasdan ismail, juhari ab razak.  (2009).  initial study on increasing productivity of orang asli in malaysia.  - european journal of social sciences.  8(3):441-448. 

a. g. jaharah, mohd nor azmi mohd rodzi, a. abdul rahman, mohd nizam ab. rahman and c. h. che hassan.  (2009).  machinabilty of fcd 500 ductile cast iron using coated carbide tool in dry machining condition.  - international journal of mechanical and materials engineering (ijmme).  4(3):279-284. 

mohd nizam ab rahman, mohd zaidi omar, norhisham tan kofli, kamaruzaman mat, siti aminah osman, zuhairusse m darus.  (2009).  assessment of engineering students perception after industrial training placement.  - european journal of social sciences.  8(3):420-431. 

mahmood, w.h.w., rahman, m.n.a., mazli, h., deros, b.m..  (2009).  maintenance management system for upstream operations in oil and gas industry: case study.  - proceedings of world academy of science, engineering and technology.  60:413-419. 

a. r. ismail, y. c. soon, s. abdullah, r. zulkifli, k. sopian, m.n.a. rahman.  (2009).  reverse engineering in fabrication of piston crown.  - european journal of scientific research.  29(1):136-146. 

baba md deros, norashikin rahman, mohd nizam ab rahman, ahmad rasdan ismail & ahmed husam said.  (2009).  application of quality function deployment to study critical service quality characteristics and performance measures.  - european journal of scientific research.  33(3):398-410. 

baba md deros, nor kamaliana khamis, mohd nizam ab rahman and ahmad rasdan ismail.  (2009).  a survey on benchmarking understanding and knowledge among malaysian automotive components manufacturing smes.  - european journal of scientific research.  33(3):385-397. 

ahmad nasser mohd rose, baba md deros and mohd nizam abdul rahman.  (2009).  a review on lean manufacturing practices in small and medium enterprises.  - seminar iii amreg 2009.  . 

baba md deros, norashikin rahman and mohd nizam ab rahman.  (2009).  the basic of benchmarking.  - seminar iii amreg 2009.  . 

baba md deros, masoomeh zeinalnezhad, mohd nizam ab rahman and tauhid pourrostam.  (2009).  a literature review on benchmarking.  - seminar iii amreg 2009.  . 

baba md deros, tan jun and mohd nizam ab rahman.  (2009).  internal benchmarking practice in semiconductor company.  - seminar iii amreg 2009.  . 

baba md deros , norashikin rahman, mohd nizam ab. rahman, and ahmed husam said.  (2009).  application of quality function deployment to study critical service quality characteristics and performance measures.  - flexible automation and intelligent manufacturing, faim2009, teesside, uk.  . 

ab rahman m.n., zain r.m., ghani j.a., nopiah z.m., ismail a.r., rahman s.a..  (2009).  barriers to implementing an online spc system in malaysian automotive manufacturing companies.  - european journal of scientific research.  30(2):315-325. 

ab rahman m.n., hernadewita, deros b.m., ismail a.r..  (2009).  cleaner production implementation towards environmental quality improvement.  - european journal of scientific research.  30(2):187-194. 

omar m.z., kofli n.t., mat k., darus z.m., osman s.a., rahman m.n.a..  (2009).  measuring the outcomes from industrial training program.  - european journal of social sciences.  8(4):581-588. 

deros, b. m., tan, j., rahman, m.n.a..  (2009).  a study on benchmarking technique implementation framework in a semiconductor company.  - regional engineering postgraduate conference (epc) 2009 / faculty of engineering and build environment.  . 

z. effendi, r. ramli, j.a.ghani, and m. n. a. rahman.  (2009).  pattern recognition system of jatropha curcas fruits using back propagation.  - 2009 ieee international conference on signal and image processing applications (icsipa).  . 

siti aminah osman, mohd zaidi omar,
kamaruzaman mat, norhisham tan kofli,
mohd nizam ab. rahman, zuhairusse m.darus.  (2009).  outcome based education (obe) curriculum assessment for industrial training program: based on student`s perception.  - wseas transactions on advances in engineering education.  12(6):454-463. 

zain, rm; ab rahman, mn; nopiah, zm.  (2009).  design an online smes-spc computer based system.  - 2009 international conference on information management and engineering, icime 2009.  . 

zulkifli r., nor m.j.m., ismail a.r., nuawi m.z., abdullah s., tahir m.f.m., rahman m.n.a..  (2009).  comparison of acoustic properties between coir fibre and oil palm fibre.  - european journal of scientific research.  33(1):144-152. 

deros b.m., khamis n.k., rahman m.n.a., ismail a.r.
.  (2009).  a survey on benchmarking understanding and knowledge among malaysian automotive components manufacturing smes.  - european journal of scientific research.  33(3):385-397. 

rahman, mna; wasilan, h; ismail, ar; ghani, ja; deros, bm.  (2009).  supply chain solutions for manufacturing companies.  - aebd `09: proceedings of the world multiconference on applied economics, business and development.  . 

ab rahman, mn; zain, rm; nopiah, zm; ismail, ar; deros, bm; rahman, sa; ghani, ja; muhamad, n.  (2009).  development of online smes-spc computer based system.  - proceedings of the 11th wseas international conference on automatic control, modeling and simulation - controlling, modeling and simulation.  . 

khamis, n; ab rahman, mn; jamaludin, kr; ismail, ar; ghani, ja; zulkifli, r.  (2009).  development of 5s practice checklist for manufacturing industry.  - world congress on engineering 2009, vols i and ii.  . 

mohd nizam ab rahman, hernadewita, baba md deros, ahmad rasdan ismail.  (2009).  essential quality practices in indonesian manufacturing smes.  - iem journal.  71(2):36-43. 

baba md deros, mohd nizam ab. rahman and jaharah a. ghani.  (2009).  a study on self-assessment practice using malaysian qmea criteria for improving organizational performance.  - journal of industrial technology.  18(2):41-58. 

jaharah a. ghani, muhammad rizal, mohd zaki nuawi, ahmad sayuti, mohd nizam ab rahman, and che hassan che haron.  (2009).  new regression model and i-kaz method for online cutting tool wear monitoring.  - world academy of science, engineering and technolog.  . 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, jaharah a ghani, baba md deros, nurhamidi mohamad, ahmad rasdan ismail.  (2009).  the implementation of spc in malaysian manufacturing companies.  - european journal of scientific research.  26(3):453-464. 

ahmad rasdan ismail, mohd rebi abdul rani, zafir khan mohd makhbul, mohd nizam a. rahman, baba mohd deros.  (2009).  modelling of workers productivity using environmental parameters in malaysian electronic industry.  - journal of the institution of engineers, malaysia.  71(2):53-63. 

khairur rijal jamaludin, norhamidi muhamad, mohd nizam ab. rahman, sri yulis m. amin, sufizar ahmad, mohd halim irwan ibrahim, murtadhahadi.  (2009).  prestasi penyahikatan pelarut dengan menggunakan kaedah reka bentuk eksperimen.  - sains malaysiana.  38(6):883-888. 

jaharah a.g, wahid s.w, che hassan c.h, nuawi m.z, mohd nizam ab rahman.  (2009).  the effect of uncoated carbide tool geometries in turning aisi 1045 using finite element analysis.  - european journal of scientific research.  28(2):271-277. 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, ahmad rasdan ismail, jaharah a. ghani. baba md. deros, norhamidi muhamad & suriani abdul rahman.  (2009).  improving process performance through smes-spc.  - 19th international conference on flexible automation and intelligent manufacturing (faim 2009).  . 

a. r. ismail. n. jusoh, k. sopian, i.m.s. usman, r. zulkifli, m.n.a. rahman.  (2009).  thermal comfort assessment: a study at malaysia car manufacturer.  - european journal of scientific research.  27(4):510-523. 

baba md deros, mohd nizam ab rahman, jaharah a. ghani, dzuraidah abd wahab, mohd hazri hashim dan nor kamaliana khamis.  (2009).  role of senior management in tqm implementation in malaysian small and medium enteprises.  - journal - the institution of engineers, malaysia.  70(1):9-14. 

ahmad rasdan ismail, mohd radzi abu mansor, chew bok kim, mazlan md. tahir, ismar m.s. usman, kamaruzzaman sopian,mohd nizam ab rahman, abu bakar sulong, baba md.deros.  (2008).  the relation between the discomfort level of malaysian automotive industries` operators towards their workstation design and work environment.  - proceeding of 9th global congress on manufacturing and management (gcmm2008), 12-14 november 2008, holiday inn, surfers paradise, australia.  . 

a. r. ismail,s.mat, n.jusoh, m.n.ab.rahman,k. sopian, i.m.s. othman, m. m. tahir, b.m.deros.  (2008).  indoor thermal comfort: a study at malaysian automotive industry.  - 2nd international conference on waste management, water pollution, air pollution, indoor climate (wwai 08). corfu, greece..  . 

mohd nizam ab rahman, ruhizan mohd yasin, kamaruzzaman sopian, juhari ab razak, ahmad rasdan ismail and azami zaharim.  (2008).  initial study of renewable energy system in rural malaysia.  - proceeding of 2nd wseas/iasme on renewable energy sources (res?08).  . 

mohd nizam ab rahman, rosmaizura mohd zain, zulkifli mohd nopiah, jaharah a. ghani, baba md deros, nurhamidi mohamad and ahmad rasdan ismail.  (2008).  statistical process control in smes. a case study.  - proceedings of the 4th wseas/iasme international conference on dynamical systems and control (control`08).  . 

ahmad rasdan ismail, mat rebi abdul rani, zafir khan mohamed makhbul, baba md deros, mohd nizam ab rahman and mesran rasan.  (2008).  relationship between worker posture and factory infrastructure: a study at malaysia packaging industry.  - proceeding of international conference on infrastructure development (incid 2008).  . 

baba md deros, tan jun & mohd nizam ab rahman.  (2008).  case study: benchmarking approach in spc implementation for wire bond process in semi conductor industry.  - prosiding seminar 2 amreg 2008 gouman resort hotel, port dickson, negeri sembilan, malaysia.  . 

rose, a.m.n., deros, b.m. & rahman, m.n.a..  (2008).  a review on the lean manufacturing in small and medium enterprises.  - prosiding seminar 2 amreg 2008 gouman resort hotel, port dickson, negeri sembilan, malaysia.  . 

mohd nizam ab rahman , rahim jamian.  (2008).  kajian penambahbaikan kurikulum universiti kuala lumpur malaysian spanish institute untuk memenuhi keperluan pelajar teknologi kejuruteraan industri automotif.  - jurnal personalia pelajar.  11:55-76. 

m.z.omar, n.t. kofli, k. mat, z.m.darus, s.a. osman, m.n.a. rahman, s. abdullah.  (2008).  employers` evaluation on attributes obtained during industrial training.  - proceedings of the 7th wseas international conference on education and educational technology (edu`08), venice, italy.  . 

s.a. osman, m.z. omar, n.t. kofli, k. mat, z.m. darus & m.n.a. rahman.  (2008).  the importance of industrial training: students` perception in civil engineering sector..  - proceeding of the 7th wseas international conference on education and educational technology. venice ,italy, nov 21-23 2008..  . 

m.z.omar, n.t. kofli, k. mat, z.m.darus, s.a. osman, m.n.a. rahman, s. abdullah.  (2008).  employers` evaluation on attributes obtained during industrial training.  - proceedings of the 7th wseas international conference on education and educational technology (edu`08).  . 

k. r. jamaludin, n. muhamad, s. y. m. amin, m. n. ab. rahman and murtadhahadi.  (2008).  rheological behavior of ss316l gas atomized powder in bimodal particle size distribution in a composite binder system,.  - international journal of mechanical and materials engineering (ijmme).  3(2):108-114. 

ahmad rasdan ismail, azmi hassan, syamimi shamsuddin, mohd zaki nuawi, mohd nizam ab rahman.  (2008).  the performance analysis of industrial robot under loaded conditions and various distance.  - international journal of mathematical models and methods in applied sciences.  2(2):277-284. 

a.r.ismail, m.r.a.mansor, m.j.m.nor, m.z.nuawi, r. zulkifli, m. n. ab. rahman and k. sopian.  (2008).  comparative studies and impact analysis of environmental noise modeling from malaysian industrial projects.  - wseas transactions on environment and development.  4(8):666-675. 

omar, mz; kolfi, nt; mat, k; darus, zm; osman, sa; rahman, mna; abdullah, s; zaharim, a.  (2008).  benefits of industrial training to engineering students.  - new aspects of engineering education.  . 

baba md deros, chua yee peng, mohd nizam ab rahman, ahmad rasdan ismail and abu bakar sulong.  (2008).  assessing acceptance sampling application in manufacturing electrical and electronic products.  - asian international journal of science and technology.  1(2):59-68. 

khairur rijal jamaludin, norhamidi muhamad, mohd nizam ab. rahman, sri yulis m. amin, murthadahadi.  (2008).  analysis of variance on the metal injection molding parameters, using a bimodal particle size distribution feedstock.  - international conference on mechanical & manufacturing engineering (icme2008).  . 

khairur rijal jamaludin, norhamidi muhamad, mohd nizam ab rahman, sri yulis m.amin, murtadhahadi.  (2008).  pengoptimuman parameter pengacuan bagi mengurangkan kecacatan jasad anum proses pengacuan suntikan logam(mim).  - iem journal.  69(2): 40-46. 

a. g. jaharah, c. g. liang, s.z. wahid, m. n. ab rahman and c. h. che hassan.  (2008).  performance of copper electrode in electrical discharge machining (edm) of aisi h13 harden steel.  - international journal of mechanical and materials engineering.  3(1):25-29. 

ahmad rasdan ismail, y.m.lee, baba md deros dan mohd nizam ab rahman.  (2008).  analisis owas dan rula ke atas operator pengendalian manual di industri automatif.  - seminar 1 amreg 2008.  . 

tan jun, baba md deros and mohd nizam ab rahman.  (2008).  practical application of benchmarking technique in semiconductor company.  - seminar 1 amreg 2008.  . 

rosmaizura mohd zain, mohd nizam ab rahman, zulkifli mohd nopiah, jaharah a ghani, baba md deros, nurhamidi mohamad and ahmad rasdan ismail.  (2008).  kajian kes perlaksanaan proses kawalan statistik (spc) di industri pembuatan malaysia: permasalahan dalam perisian spc.  - seminar 1 amreg 2008.  . 

dr. baba md deros, lim wai yee, ahmad rasdan ismail, mohd nizam ab rahman and norani nordin.  (2008).  a study on machine capability and efficiency using spc.  - proceedings of the 13th international conference on iso 9000 & tqm.  . 

hernadewita, mohd. nizam ab. rahman and baba md deros.  (2008).  5-s and total quality management implementation.  - proceeding of the 13th international conference on iso 9000 & tqm.  . 

norhamidi muhamad, dzuraidah abd wahab, nor kamaliana khamis, zaliha wahid, jaharah abd. ghani, baba md deros, che hasan che haron, mohd nizam ab rahman dan ahmad rasdan ismail.  (2008).  kajian pelaksanaan kaedah penilaian rakan sebaya dalam projek berkumpulan.  - seminar pendidikan kejuruteraan dan alam bina 2008 (peka 2008).  . 

b.m. deros , c.y. peng, m.n. ab rahman, a.r. ismail, a.b. sulong.  (2008).  assessing acceptance sampling application in manufacturing electrical and electronic products.  - journal of achievements in materials and manufacturing engineering.  31(2):622-628. 

mohd zaidi omar,mohd nizam ab. rahman,norhisham tan kofli, kamarulzaman mat, zuhairuse m.darus,siti aminah osman, ruhizan mohd yasin..  (2008).  assessment of engineering students perception after industrial training placement.  - 4th wseas/iasme international conference on educational technologies (edute 08), oct 26-28, 2008 corfu, greece.  . 

m.z. omar, z.m. darus, n.t. kofli, k. mat, s.a. osman & m.n.a. rahman.  (2008).  manfaat kursus latihan industri dalam meningkatkan keyakinan pelajar.  - seminar pendidikan kejuruteraan dan alam bina (peka 2008).  . 

k.r. jamaludin, n. muhamad, m.n. ab. rahman, s.y. m. amin, s. ahmad, m.h.i. ibrahim. i murtadahadi, n.h.m. nor.  (2008).  an influence of ss316l`s particle shape to the injection molding of composite binder feedstock.  - cafeo26, bangkok, thailand, 26-29 nov. 2008.  . 

norhamidi muhamad,dzuraidah abd.wahab,zaliha wahid,nor kamaliana khamis,ahmad rasdan ismail,mohd nizam ab.rahman, jaharah a.ghani, baba md.deros dan che hassan che haron.  (2008).  pencapaian antribut pembelajaran pembelajaran berasaskan hasil:kaedah penilaian dan penambahbaikan.  - seminar pendidikan kejuruteraan & alam bina (peka 2008).  . 

m.z. omar, k. mat, n.t. kofli, z.m. darus, s.a. osman & m.n.a. rahman.  (2008).  penilaian majikan terhadap prestasi pelajar latihan industri fakulti kejuruteraan dan alam bina.  - seminar pendidikan kejuruteraan dan alam bina (peka 2008).  . 

a. r. ismail,m. r. a. rani,z. k. m. makhbul, i.m.s.usman,c. meier,m.n.ab.rahman, k. sopian,m. m. tahir.  (2008).  assessment of environmental factors at automotive industry:a case study at car body assembly line.  - proceeding of 2nd wseas/iasme international conference on energy planning, energy saving, environmental education (epese?08).  . 

mohd nizam ab rahman, hernadewita, baba md deros, ahmad rasdan ismail, kamaruzzaman sopian, azami zaharim.  (2008).  applying cleaner production concepts in improving quality of environment.  - proceeding of 2nd wseas/iasme on renewable energy sources (res/08).  . 

k. r. jamaludin, n. muhamad, m. n. ab. rahman, murtadhahadi, s. y. m. amin, s. ahmad, m. h. i. ibrahim, n. h. m. nor.  (2008).  rheological investigation of water atomised metal injection molding (mim) feedstock for processbility prediction.  - .  . 

khairur rijal jamaludin, norhamidi muhamad, mohd nizam ab. rahman, sri yulis m.amin , muhammad husain ismail & murtadhahadi.  (2008).  particle size and injection temperature effect on the injection molding of ss316l powder.  - journal of mechanical engineering.  5 (1):59-72. 

jaharah a. ghani, noordin ibrahim, che hassan che haron, dan mohd nizam ab. rahman.  (2008).  mekanisme haus mata alat karbida semasa mengisar hujung besi tuang kelabu menggunakan bendalir pemotong.  - malaysian metallurgical conference ? mmc 2008, 3-4 december 2008, ukm, bangi, malaysia.  . 

mohd radzi abu mansor, shahrum abdullah, mohd nizam abd. rahman, mariyam jameelah ghazali.  (2007).  bengkel kecemerlangan budaya ilmu.  - seminar pendidikan kejuruteraan dan alam bina (peka07) -melahirkan modal insan yang cemerlang-.  . 

kamaruzzaman sopian, sulaiman shaari, nowshad amin, rozli zulkifli, and mohd nizam abdul rahman.  (2007).  performance of a grid-connected photovoltaic system in malaysia.  - international journal of engineering and technology.  4(1):57-65. 

a.r. ismail, d.a.wahab, s.c. abdullah, m.n.a. rahman, b.m deros and h. mokhtar.  (2007).  dfa approach in weight measuring jig design for malaysian semiconductor industry.  - international conference on advanced processes and systems in manufacturing, regional conference on engineering mathematics, mechanics, manufacturing & architecture (em3arc) 2007, marrio.  . 

tjukup marnoto, wan ramli wan daud, kamaruzzaman sopian, rozli zulkifli, mohd nizam ab rahman, m. alghou and nowshad amin.  (2007).  performance of a grid connected solar hydrogen pv system in malaysia.  - proceeding 17th international photovoltaic science and engineering conference, 3-7 december 2007, fukuoka, japan..  . 

kamaruzzaman sopian, sulaiman shaari, rozli zulkifli and mohd nizam abdul rahman.  (2007).  performance of a grid-connected photovoltaic system in malaysia.  - proceedings 2nd international engineering convention 2007: globalisation in growing economies ? building capacity, 10 - 14 march 2007, jeddah, saudi arabia..  . 

tjukup marnoto, wan ramli wan daud, kamaruzzaman sopian, mohd nizam ab rahman, rozli zulkifli, m alghouand nowshad amin.  (2007).  economic analysis of a grid connected solar hydrogen pv system.  - proceedings 17th international photovoltaic science and engineering conference, 3-7 december 2007, fukuoka, japan,.  . 

hernadewita, mohd nizam ab rahman, baba md deros.  (2007).  penanganan limbah industri cat ditinjau dari sisi clean technology dalam manajemen industri.  - .  . 

mohd nizam ab. rahman, baba md deros, rozli zuklifli and ahmad rasdan ismail.  (2007).  a practical tool for small and medium enterprise quality performance improvement.  - iem journal.  68(3):56-64. 

hernadewita, mohd nizam ab. rahman dan baba md deros.  (2007).  penanganan limbah industri cat ditinjau dari sisi clean technology dalam manajemen industri.  - jurnal teknik mesin.  4(2):68-132. 

mohd nizam ab rahman & james tannock.  (2007).  emergence of quality management within smes in malaysia: perspective and evidence.  - sasin journal of management.  13(1):42-54. 

mohd zaidi omar, mohd nizam ab rahman, zuhairuse md darus, kamaruzaman mat, norhisham tan kofli, siti aminah osman, shahrir abdullah.  (2007).  persepsi pelajar jkmb terhadap manafaat latihan industri.  - seminar pendidikan kejuruteraan dan alam bina 2007.  . 

mohd zaidi omar, kamaruzaman mat, norhisham tan kofli, zuhhairuse md darus, siti aminah osman, mohd nizam ab rahman shahrir abdullah.  (2007).  persepsi majikan terhadap pelajar latihan industri jkees 2007.  - seminar pendidikan kejuruteraan dan alam bina 2007.  . 

mohd zaidi omar, zuhairuse md darus, kamaruzaman mat, norhisham tan kofli, siti aminah osman, mohd nizam ab rahman, shahrir abdullah.  (2007).  pandangan pelajar fakulti kejuruteraan terhadap kursus latihan industri.  - seminar pendidikan kejuruteraan dan alam bina 2007.  . 

hernadewita & mohd nizam ab rahman.  (2007).  enhancing productivities improvement through apllying cleaner production into the development of indonesian small and medium industries..  - seminar penyelidikan siswazah 2007.  . 

ahmad rasdan ismail, mohd nizam ab rahman, yeo chia soon and sukarnur abdullah.  (2006).  modeling and fabrication of campro proton piston head using the reverse engineering method.  - proceeding of the 1st regional conference on vehicle engineering and technology 2006 (rivet2006), 23rd – 25th may 2006, pwtc, kuala lumpur, malaysia.  .