a. md ali, m.z. omar, m.s. salleh, i.f. mohamed, n.f.b wakhi anuar.  (2023).  investigation of the mechanical properties and microstructure of graphene-aluminium alloy composite fabricated by stir casting process.  - materials science forum.  3-8. 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, abdul hadi azman, wan sharuzi wan harun, msh al-furjan.  (2023).  review on volumetric energy density: influence on morphology and mechanical properties of ti6al4v manufactured via laser powder bed fusion.  - progress in additive manufacturing.  265-283. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, ahmad muhammad aziz, osama m. irfan.  (2023).  the microstructural refinement of the a356 alloy using semi-solid and severe plastic-deformation processing.  - metals.  1-24. 

nuramilawahida mat ropi, hawa hishamuddin, dzuraidah abd wahab, wakhid ahmad jauhari, fatin amrina a. rashid, nor kamaliana khamis, intan fadhlina mohamed, mohd anas mohd sabri, mohd radzi abu mansor.  (2023).  optimal lot-sizing decisions for a remanufacturing production system under spare parts supply disruption.  - mathematics.  4053-4072. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, intan fadhlina mohamed, junaidi syarif, ahmad muhammad aziz, fathin iliana jamhari.  (2023).  microstructure and mechanical properties of selective laser melted 17-4 ph stainless steel; build direction and heat treatment processes.  - materials today communications.  1-13. 

l. joey, w. f. h. zamri, m. f. m. din, a. shamsudeen, i. f. mohamed.  (2023).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi-layer hierarchy coatings on automotive bearings.  - aip conference proceedings.  1-8. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman, dawod mohamed elabar, farag ibrahim haider, saziana samat and osama m. irfan.  (2023).  effect of semisolid and heat treatment process on microstructural refinement of al-7si alloy.  - materials.  1-13. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

mohd. zaidi bin omar;abu bakar bin sulong;zainuddin bin sajuri;intan fadhlina binti mohamed.  (2023).  mechanical properties and microstructural evolution of thixoformed graphene nanosheets reinforced aluminium alloy matrix composites.  - .  . 

n. k. khamis, z. wahid, i. f. mohamed.  (2023).  challenges in coordinating and conducting an integrated group project in mechanical engineering during covid-19 pandemic phase: a case study.  - aip conference proceedings.  30019. 

takahiro masuda, yongpeng tang, intan fadhlina mohamed, zenji horita.  (2023).  ultrafine-grained az61 alloy produced by high-pressure torsion: advent of superplasticity and effect of anisotropy.  - materials science and engineering: a.  1-9. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

wan fathul hakim bin w. zamri;jaharah bt. a ghani;intan fadhlina binti mohamed.  (2022).  mechanical and tribological properties of multilayer coatings with a hierarchical architecture for the metal forming industry.  - .  . 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  combining heat treatment and high-pressure torsion to enhance the hardness and corrosion resistance of a356 alloy.  - metals.  1-12. 

intan fadhlina binti mohamed;ahmad kamal ariffin bin mohd ihsan;mariyam jameelah binti ghazali;abu bakar bin sulong;wan fathul hakim bin w. zamri.  (2022).  extra superplasticity of aa2618 alloy processed by high-pressure torsion.  - .  . 

intan fadhlina binti mohamed;mohd. zaidi bin omar;shahrum bin abdullah;zainuddin bin sajuri;wan fathul hakim bin w. zamri;nashrah hani binti jamadon.  (2022).  giant straining of highly commercial aluminum alloys via high-pressure torsion process for vehicle applications.  - .  . 

wan fathul hakim bin w. zamri;mariyam jameelah binti ghazali;mohd faizal bin mat tahir;abdul hadi bin azman;intan fadhlina binti mohamed.  (2022).  sifat mekanik, prestasi dan mod kegagalan salutan berlapis pada gelang omboh.  - .  . 

mohd. zaidi bin omar;zainuddin bin sajuri;intan fadhlina binti mohamed.  (2022).  effect of equal channel angular pressing on microstructural development and tensile properties of er-modified al-15%mg2si metal matrix composite.  - .  . 

junaidi syarif, amro altoyuri, intan fadhlina mohamed.  (2022).  equal channel angular pressing of single crystal aluminum: a molecular dynamics simulation.  - journal of materials research and technology.  888-897. 

m.a. aripin, z. sajuri, j. syarif, a.h. baghdadi and i.f. mohamed.  (2022).  evaluation of microstructure and porosity for 3d printed stainless steel.  - materials today: proceedings.  3082-3086. 

m.a. fauthan, s. abdullah,m.f. abdullah, i.f. mohamed.  (2022).  multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy.  - frattura ed integrita strutturale.  289-303. 

mohd zaidi omar, saziana samat, intan fadhlina mohamed.  (2022).  pemprosesan logam separa pepejal: pendekatan industri automotif.  - .  183. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman and osama m. irfan.  (2022).  microstructure refinement by a combination of heat treatment and thixoforming process followed by severe plastic deformation and their effects on al-si alloy hardness.  - metals.  1-15. 

mohammad azlan aripin, zainuddin sajuri, nashrah hani jamadon, amir hossein baghdadi, junaidi syarif, intan fadhlina mohamed and ahmad muhammad aziz.  (2022).  effects of build orientations on microstructure evolution, porosity formation, and mechanical performance of selective laser melted 17-4 ph stainless steel.  - metals.  1-24. 

afifah md ali, mohd zaidi omar, mohd shukor salleh, hanizam hashim, intan fadhlina mohamed, nur farah bazilah wakhi anuar.  (2022).  mechanical behaviour and morphology of thixoformed aluminium alloy reinforced by graphene.  - materials.  1-15. 

saziana samat, mohd zaidi omar, amir hossein baghdadi, intan fadhlina mohamed, ahmad muhammad aziz.  (2021).  mechanical properties and microstructures of a modified al-si-cu alloy prepared by thixoforming process for automotive connecting rods.  - journal of materials research and technology.  1086-1102. 

n.j. suang, w.f.h. w. zamri, m.f.m. din, a. shamsudeen, i. f. mohamed, a.k. ariffin.  (2021).  effects of layer addition on hardness of a multi-layered tialn and tin coating.  - solid state technology.  7339-7351. 

s. samat, m.z. omar, a.h. baghdadi, i.f. mohamed, a. rajabi, a.m. aziz.  (2021).  microstructural evolution, dislocation density and tensile properties of al-6.5si-2.1cu-0.35mg alloy produced by different casting processes.  - journal of materials science and technology.  145-157. 

farhad ostovan, ehsan shafiei, meysam toozandehjani, intan fadhlina mohamed, masoud soltani.  (2021).  on the role of molybdenum on the microstructural,mechanical and corrosion properties of the gtawaisi 316 stainless steel welds.  - journal of materials research and technology.  2115-2125. 

balya mulkan wijaya mohammad yusuf, ezzarhan abdullah, intan fadhlina mohamed.  (2021).  performance of pre-fabricated frame scaffolds falsework.  - proceedings of the sustainable concrete materials and structures in concrete construction 2020.  215-227. 

esmaeil amiri, farhad ostovan, meysam toozandehjani, ehsan shafiei, intan fadhlina mohamed.  (2021).  study and selection of most appropriate filler rod for gtaw of s32750 super duplex steel joints: a comprehensive study on microstructural, mechanical and corrosion properties.  - materials chemistry and physics.  1-12. 

l. joey1, *w f h zamri1,2, m f m din3, a shamsudeen1 and i. f. mohamed1.  (2021).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi-layer hierarchy coatings on automotive bearings.  - iconmet 2021 1st international conference on manufacturing engineering technology 2021.  1-18. 

mariyam jameelah binti ghazali;norhamidi bin muhamad;intan fadhlina binti mohamed.  (2021).  facile in-situ casting technique of fe-tic for industries.  - .  . 

l. joey, w f h zamri, m f m din, a shamsudeen, and i. f. mohamed.  (2021).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi layer hierarchy coatings on automotive bearings.  - international conference on manufacturing technology-iconmet 2021.  1-8. 

mariyam jameelah binti ghazali;mohammad rasidi bin mohammad rasani;wan fathul hakim bin w. zamri;intan fadhlina binti mohamed;armin rajabi nasirabadi.  (2021).  wear analyses of thermal sprayed tic/crc coated nickel based superalloys in gas turbines..  - .  . 

n k khamis, z wahid and i f mohamed.  (2021).  challenges in coordinating and conducting an integrated group project in mechanical engineering during covid-19 pandemic phase.  - international conference n technical and vocational education & training (icontvet).  206. 

afifah md ali, mohd zaidi omar, hanizam hashim, mohd shukor salleh and intan fadhlina mohamed.  (2021).  recent development in graphene-reinforced aluminium matrix composite: a review.  - reviews on advanced materials science.  801-817. 

beh tek loom 1 , wan fathul hakim w. zamri 1,* , muhamad faiz md din 2 , intan fadhlina mohamed 1 & azhari shamsudeen 1.  (2021).  new modeling of the influence of coating on the contact surface of ball bearings.  - virtual conference on computational and experimental mechanics.  1-26. 

leong chee yau, wan fathul hakim w. zamri, muhammad faiz md din, ahmad kamal ariffin, intan fadhlina mohamed.  (2021).  influences of coefficient of frictions on the contact behavior for ball bearings.  - solid state technology.  4387-4394. 

zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  - .  . 

leong chee yau, wan fathul hakim w. zamri, muhammad faiz md din, intan fadhlina mohamed, azman ahmad.  (2020).  elastic and elasto-plastic contact behavior on ball bearing.  - international journal of recent technology and engineering.  3622-3628. 

nor kamaliana khamis, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad, mohd faizal mat tahir.  (2020).  perbandingan kompetensi dalam akademik dan prestasi dalam projek berkumpulan: satu kajian kes.  - k-novasi 2020.  1-13. 

nor kamaliana khamis, mohd faizal mat tahir, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad.  (2020).  teori dan inovasi pengajaran dan pembelajaran: menyusuri pandemik covid-19.  - .  10. 

leong chee yau, wan fathul hakim w. zamri, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2020).  an elasto-plastic ball bearing contact with bilinear hardening.  - international journal of innovative technology and exploring engineering.  438-445. 

wan fathul hakim w. zamri, intan fadhlina mohamed, chan teng neng, muhamad isyraf aznam & muhamad faiz md. din.  (2020).  mekanik komputeran: eksperimen model dan simulasi.  - .  19. 

nora osman, zainuddin sajuri, intan fadhlina mohameda, mohd zaidi omara & syarif junaidi.  (2020).  effect of intercritical annealing on the microstructural and mechanical behaviours of dual-phase steels.  - jurnal kejuruteraan.  629-636. 

norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  - .  . 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, intan fadhlina mohameda & mohannad saleh hammadi al-furjan.  (2020).  debinding process of co-powder injection molded (2c-pim) ss17-4ph and ss316l.  - jurnal kejuruteraan.  49-53. 

zainuddin sajuri, intan fadhlina mohamed.  (2020).  analisis fraktografi dan metalografi bagi struktur header steel duplex.  - .  1-33. 

armin rajabi, mariyam jameelah ghazali, intan fadhlina mohamed, norhamidi muhamad.  (2020).  novel precursor of nitrogen for the synthesis of tic0.7n0.3 through vacuum oven-induced combustion.  - ceramics international.  9271-9280. 

cheeranan krutsuwan nuphairode, intan fadhlina mohamed, fauziana lamin, wan fathul hakim wan zamri, mohd zaidi omar, zenji horita.  (2020).  the evolvement of mechanical properties and microstructure of commercial aluminum alloy 6061 via high-pressure torsion.  - jurnal kejuruteraan.  175-182. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, ahmad kamal ariffin, muhammad faiz md din, intan fadhlina mohamed, guanyu deng.  (2020).  the effect of tialn-based and alcrn-based coatings towards mechanical properties on punch tools using finite element method.  - jurnal tribologi.  65-79. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, muhammad faiz md din, intan fadhlina mohamed, guanyu deng, ahmad kamal ariffin mohd ihsan.  (2019).  simulation of nanoindentation on thin single layers of tialn and alcrn for piercing and blanking tools.  - 22nd international conference on advances in materials & processing technologies.  130. 

saziana samat, mohd zaidi omar and intan fadhlina mohamed.  (2019).  effect of feedstock geometry on the semisolid processing of al-si-cu-mg alloy.  - materials research express.  1-11. 

m.a. gebril, m.z. omar, n.k. othman & i.f. mohamed.  (2019).  microstructural refinement and corrosion resistance improvement of heat-treated a356 alloy processed by equal channel angular pressing.  - sains malaysiana.  2749-2757. 

mohamed a. gebril, m. zaidi. omar, nk. othman & i.f. mohamed.  (2019).  effect of equal channel angular pressing processing routes on corrosion resistance and hardness of heat treated a356 alloy.  - sains malaysiana.  661-668. 

saziana samat, mohd zaidi omar, intan fadhlina mohamed.  (2019).  high-frequency induction heating of al-si-cu-mg aluminium alloy in thixoforming.  - materials research.  1-13. 

wan fathul hakim w zamri, ng jie suang, intan fadhlina mohamed, ahmad kamal ariffin, muhammad faiz md din.  (2019).  modelling of nanoindentation of tialn and tin thin film coatings for automotive bearing.  - international journal of recent technology and engineering (ijrte).  7197-7199. 

muhamad isyraf bin aznam, wan fathul hakim w zamri, ahmad kamal ariffin, muhammad faiz md din, intan fadhlina mohamed, guanyu deng.  (2019).  the effect of tialn-based and alcrn-based coatings towards mechanical properties on punch tools.  - 6th international conference on advanced processes and systems in manufacturing (apsim 2019).  28. 

mohamed abdelgawad gebril, mohd zaidi omar, intan fadhlina mohamed, norinsan kamil othman.  (2019).  microstructural evaluation and corrosion resistance of semisolid cast a356 alloy processed by equal channel angular pressing.  - metals.  1-15. 

najla nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  121-125. 

wan fathul hakim w.zamri, intan fadhlina mohamed, khairunas bakri, muhamad faiz md din.  (2018).  simulation of nanoindentation of single and multiple coating layers for automotive bearings.  - international journal of engineering & technology.  . 

noor atiqah badaluddin, wan fathul hakim w zamri, muhammad faiz md din, intan fadhlina mohamed, and jaharah a ghani.  (2018).  coatings of cutting tools and their contribution to improve mechanical properties: a brief review.  - international journal of applied engineering research.  . 

w. f. h. w. zamri, b. kosasih, k. tieu, m.f. md. din, i.f. mohamed.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - .  22. 

najlaa nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  . 

najla nazihah mas'ood, farhana mohd foudzi, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farrahshaida mohd salleh, ukwueze bonaventure emeka.  (2018).  two component materials in powder metallurgy: a review paper focused on the processing technique applied in powder metallurgy.  - jurnal kejuruteraan.  23-31. 

siti fatimah hassan, wan fathul hakim w zamri, intan fadhlina mohamed, wan aizon wan ghopa, muhammad faiz md din.  (2017).  influence of bilayer structure and sublayer distance on the hardness of multilayer thin film tialn and crn.  - journal of mechanical engineering.  201-212. 

wan fathul hakim w.zamri, intan fadhlina mohamed, muhamad faiz md din & khairunas bakri.  (2017).  simulation of nanoindentation of single and multiple coating layers for automotive bearings.  - 4th international conference on recent advances in automotive engineering & mobility research (recar).  . 

farrahshaida mohd salleh, abu bakar sulong, farhana mohd foudzi, intan fadhlina mohamed, natasha emira azaman, najla nazihah mas'ood, seong jin park.  (2017).  flow behavior characterization of hydroxyapatite for powder injection molding (pim).  - journal of mechanical engineering.  77-88. 

intan fadhlina mohamed, takahiro masuda, seungwon lee, kaveh edalati, zenji horita, shoichi hirosawa, kenji matsuda, daisuke terada, mohd zaidi omar.  (2017).  strengthening of a2024 alloy by high pressure torsion and subsequent aging.  - journal of materials science and engineering a.  112-118. 

roszilah hamid, norhana arshad, mohd shahbudin mastar@masdar, et al..  (2017).  meremajakan pengajaran, mengispirasikan pembelajaran.  - prosiding peka 2016 k-novasi p & p ukm (pendidikan kejuruteraan dan alam bina).  1-316. 

intan fadhlina mohamed, seungwon lee, kaveh edalati, zenji horita, shahrum abdullah, mohd zaidi omar, wan fathul hakim wan zamri.  (2016).  grain refinement and microstructure evolution in aluminum a2618 alloy by high pressure torsion.  - jurnal teknologi.  149-152. 

wan fathul hakim w zamri, shahrum abdullah, mohd zaidi omar, rozli zulkifli, mohammad rasidi mohammad rasani, zambri harun, wan aizon wan ghopa, and intan fadhlina mohamed.  (2016).  pemantapan analisis komputeran dan penghasilan video pendek dalam projek reka bentuk ke arah penyediaan jurutera kompetan.  - prosiding k-novasi pengajaran & pembelajaran ukm.  55-61.