Penerbitan Terkini

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mihirssen gunasegran.  (2022).  simulation analysis of graphene addition on polymeric composite.  - jurnal kejuruteraan.  941-947. 

norhamidi bin muhamad;mohd. zaidi bin omar;abu bakar bin sulong;nashrah hani binti jamadon;farhana binti mohd foudzi.  (2022).  effect of metal-ceramic (bi-material) on inter-surface bonding by micro co-powder injection molding.  -

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd zamzuri ahmad shukri.  (2022).  reinforced composite as a feeder for 3d printing application.  - jurnal kejuruteraan.  671-678. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2022).  prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu: suatu ulasan ringkas.  - sains malaysiana.  1545-1556. 

fathin iliana jamhari, farhana mohd foudzi & minhalina ahmad buhairi.  (2022).  effect of hip on porosity of ti6al4v manufactured by laser powder bed fusion: a brief review.  - proceedings of the 7th international conference and exhibition on sustainable energy and advanced materials (ice-seam 2021), melaka malaysia.  22-25. 

nurul nadiah mahmud, farah atiqah abdul azam, mohd ikram ramli, farhana mohd foudzi, kei ameyama, abu bakar sulong.  (2021).  rheological properties of irregular-shaped titanium-hydroxyapatite bimodal powder composite moulded by powder injection moulding.  - journal of materials research and technology.  2255-2264. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2021).  conductive polymer composites using 3d printing for electronic devices: a review.  - international conference on manufacturing engineering technology (iconmet).  94. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and farhana mohd foudzi.  (2021).  a review on bonding of polyamide reinforced carbon fibre via additive manufacturing.  - iop conf. series: materials science and engineering.  1-6. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, wan sharuzi wan harun, mohannad saleh hammadi al-furjan.  (2021).  effect of energy density on properties of additive manufactured ti6al4v via slm.  - international conference on powder metallurgy and particulate materials (powdermet2021).  434-448. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong.  (2021).  seramik nano: revolusi produk mikro.  - 173. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari.  (2020).  influence of processing parameters of selective laser melting (slm) on additive manufactured titanium alloy (ti6al4v).  - proceedings of mechanical engineering research day 2020.  55-57. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, intan fadhlina mohameda & mohannad saleh hammadi al-furjan.  (2020).  debinding process of co-powder injection molded (2c-pim) ss17-4ph and ss316l.  - jurnal kejuruteraan.  49-53. 

farhana mohd foudzi, fathin iliana jamhari, minhalina ahmad buhairi.  (2020).  effect of processing parameters on microhardness and microstructure of additive manufactured titanium alloy (ti6al4v) via selective laser melting (slm).  - proceedings of mechanical engineering research day 2020,.  58-60. 

norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  -

nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd yusuf zakaria and mohd ikram ramli.  (2020).  study on the influence mechanism of sintering hydroxyapatite (ha).  - journal of ceramic processing research.  662-666. 

mohd ikram ramli, farhana mohd foudzi, abu bakar sulong, fatin aqilah abdul yazid, norhamidi muhamad, david hui.  (2020).  characterization of titanium alloy-hydroxyapatite composite through powder injection molding.  - jurnal kejuruteraan.  177-184. 

muhammad nur farhan saniman, khairul anwar abd wahid, farhana mohd foudzi, hilmi hela ladin, ikuo ihara.  (2020).  quantitative roughness characterization of non-gaussian random rough surfaces by ultrasonic method using pitch-catch and pulse-echo configurations.  - international journal of mechanical & mechatronics engineering.  80-87. 

najlaa nazihah masood, abu bakar sulong, norhamidi muhamad, farhana mohd foudzi, farrahshaida mohd salleh.  (2019).  the study of sintering behavior of stainless steel 17-4ph-stainless steel 316l for two materials powders injection molding (2c-pim) process.  - journal of mechanical engineering.  67-77. 

zainuddin sajuri, wan fathul hakim w zamri, nor kamaliana khamis, mariyam jameelah ghazali, hawa hishamuddin, azhari shamsudeen, farhana mohd foudzi.  (2019).  book of abstracts : apsim 2019.  - 6th international conference on advanced processes and systems in manufacturing.  1-38. 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, farhana mohd foudzi, mohannad saleh hammadi al-furjan.  (2018).  effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite.  - plos one.  1-17. 

mohd khairul fadzly md radzi, norhamidi muhamad, majid niaz akhtar, zakaria razak & farhana mohd foudzi.  (2018).  the effect of kenaf filler reinforcement on the mechanical and physical properties of injection moulded polypropylene composites.  - sains malaysiana. 

najla nazihah mas'ood, farhana mohd foudzi, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farrahshaida mohd salleh, ukwueze bonaventure emeka.  (2018).  two component materials in powder metallurgy: a review paper focused on the processing technique applied in powder metallurgy.  - jurnal kejuruteraan.  23-31. 

najla nazihah mas'ood, abu bakar sulong, norhamidi muhamad, intan fadhlina mohamed, farhana mohd foudzi, mohd ikram ramli, farrahshaida mohd salleh.  (2018).  flow behavior and injectability of ss17-4ph with ps and pe binders in powder injection molding.  - journal of advanced research in fluid mechanics and thermal sciences.  121-125. 

nor nabilla kadiman, julie elbyana romli, norhamidi muhamad, abu bakar sulong, farhana mohd foudzi.  (2017).  pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi.  - sains malaysiana.  1039-1043. 

farrahshaida mohd salleh, abu bakar sulong, farhana mohd foudzi, intan fadhlina mohamed, natasha emira azaman, najla nazihah mas'ood, seong jin park.  (2017).  flow behavior characterization of hydroxyapatite for powder injection molding (pim).  - journal of mechanical engineering.  77-88. 

farhana mohd foudzi, ikuo ihara.  (2015).  numerical study on optimum design of a clad waveguide for ultrasonic pulse-echo measurements with high signal to noise ratio.  - mechanical engineering letters.  1-8. 

hafizawati zakaria, norhamidi muhamad, abu bakar sulong, mohd halim irwan ibrahim, farhana mohd foudzi.  (2014).  moldability characteristics of 3mol yttria stabilized zirconia feedstock for micro-powder injection molding process.  - sains malaysiana.  129-136. 

farhana mohd foudzi, ikuo ihara.  (2014).  development of polygonal buffer rods for ultrasonic pulse-echo measurements.  - journal of physics: conference series.  1-4. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2012).  yttria stabilized zirconia formed by micro ceramic injection molding: rheological properties and debinding effects on the sintered part.  - ceramics international.  2665-2674. 

farhana mohd foudzi, norhamidi muhamad, abu bakar sulong, hafizawati zakaria.  (2010).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding.  - applied mechanics and materials.  480-484.