abu bakar bin sulong;norhamidi bin muhamad;mohd. zaidi bin omar;zainuddin bin sajuri;nabilah afiqah binti mohd radzuan;mohd ikram bin ramli.  (2023).  mechanism in processability of copper-aluminium-manganese shape memory alloys (smas) through powder injection moulding (pim).  - .  . 

nabilah afiqah binti mohd radzuan;norhamidi bin muhamad;abu bakar bin sulong;farhana binti mohd foudzi.  (2023).  bonding of polyamide reinforced carbon fibre via additive manufacturing.  - .  . 

abu bakar bin sulong;rosiah binti rohani;farhana binti mohd foudzi;nabilah afiqah binti mohd radzuan.  (2023).  radiation-induced grafting of electrospun nanofiber based functionalized natural rubber for membrane application.  - .  . 

nurul syazwani sahari, nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, nishata royan a/p rajendran royan.  (2023).  rheology properties in composite filament making.  - 8th international conference on fuel cell & hydrogen technology 3rd symposium on fuel cell and hydrogen technology 2023 (icfcht sfcht 2023).  05. 

nisa naima khalida, nabilah afiqah radzuana,b*, abu bakar sulonga,b, farhana mohd foudzia & ariffuddin hasrana.  (2023).  rheological test of flowability and diffusion behavior of carbon fibre reinforced polyamide.  - jurnal kejuruteraan.  215-222. 

minhalina ahmad buhairi, farhana mohd foudzi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, abdul hadi azman, wan sharuzi wan harun, msh al-furjan.  (2023).  review on volumetric energy density: influence on morphology and mechanical properties of ti6al4v manufactured via laser powder bed fusion.  - progress in additive manufacturing.  265-283. 

al basir, norhamidi muhamad, abu bakar sulong, muhammad bin mohamed amin, nashrah hani jamadon, nabilah afiqah mohd radzuan.  (2023).  micro-injection molding and debinding behavior of hydroxyapatite/zirconia bi-materials fabricated by two-component micro powder injection molding process.  - materials.  1-18. 

fathin iliana jamhari. farhana mohd foudzi, minhalina ahmad buhairi, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, intan fadhlina mohamed, nashrah hani jamadon, kim seah tan.  (2023).  influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in lpbf: a brief review.  - journal of materials research & technology.  4091-4110. 

nabilah afiqah mohd radzuan, nisa naima khalid, farhana mohd foudzi, nishata royan rajendran royan and abu bakar sulong.  (2023).  mechanical analysis of 3d printed polyamide composites under different filler loadings.  - polymers.  1-11. 

fathin iliana jamhari, farhana mohd foudzi, minhalina ahmad buhairi, norhamidi muhamad, intan fadhlina mohamed, abu bakar sulong, nabilah afiqah mohd radzuan.  (2023).  impact of hot isostatic pressing on surface quality, porosity and performance of ti6al4v manufactured by laser powder bed fusion: a brief review.  - jurnal tribologi.  1-15. 

nisa naima khalid, fatin zahidah awang adi, nabilah afiqah mohd radzuan & abu bakar sulong.  (2023).  shear test characterization of 3d printed polyamide reinforced carbon fiber composites.  - jurnal kejuruteraan.  431-436. 

zaliha wahid, nabilah afiqah mohd radzuan, nurhasyimah abd aziz, afifah zakiyyah juri , abu bakar sulong.  (2023).  on mechanical performance of 3d printed wood mimic materials.  - 7th powder metallurgy and advanced processes & systems in manufacturing 2023 (pm7&apsim2023).  1-9. 

nurul syazwani sahari, nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong.  (2023).  rheology properties in polyamide reinforced carbon fibre composite.  - international conferences on powder metallurgy and advanced processes & systems in manufacturing (pm7 & apsim2023).  1-3. 

norazyan rudi hartono, nabilah afiqah mohd radzuan, nisa naima khalid, abu bakar sulong,.  (2023).  3d printed carbon fibre reinforced polyamides in high temperature.  - jurnal kejuruteraan.  1351-1361. 

nabilah afiqah mohd radzuan, nurul syazwani sahari, nisa naima khalid, abu bakar sulong.  (2022).  rheology properties in composite filament making.  - international seminar on engineering science and technology international conference (estic) 2022.  1. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, david hui.  (2022).  adhesion behaviour of 3d printed polyamide carbon fibre composite filament.  - reviews on advanced materials science.  838-848. 

mohd shahbudin mastar @ masdar et al. (rujuk salinan kertas untuk senarai lengkap penulis).  (2022).  fuel cell system - general operational and safety requirements.  - .  1-32. 

nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad.  (2022).  layup sequence and interfacial bonding of additively manufactured polymeric composite.  - 6th postgraduate colloquium for environmental research 2022 (pocer 2022).  16-17. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2022).  prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu: suatu ulasan ringkas.  - sains malaysiana.  1545-1556. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd zamzuri ahmad shukri.  (2022).  reinforced composite as a feeder for 3d printing application.  - jurnal kejuruteraan.  671-678. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mihirssen gunasegran.  (2022).  simulation analysis of graphene addition on polymeric composite.  - jurnal kejuruteraan.  941-947. 

nurul akidah baharuddin et al. (rujuk salinan kertas untuk senarai lengkap penulis).  (2022).  fuel cell system - stationary backup power solution for telecommunication sites.  - .  1-35. 

n.n. khalid, n.a.m. radzuan,a.b. sulong, f.m. foudzi.  (2022).  adhesion behaviour of 3d printed polymer composites.  - composite sciences and technology international conference 2022 (comsat2022).  4-5. 

i gusti ayu arwati, edy herianto majlan, loh kee shyuan, khuzaimah ariffin , teuku husaini,sagir alva, wahyu muhammad, nabilah afiqah mohd radzuan.  (2022).  effect of chitosan on the corrosion inhibition for aluminum alloy in h2so4 medium.  - 23rd world hydrogen energy conference.  149-150. 

nabilah afiqah mohd radzuan, fatin zahidah awang adi, abu bakar sulong, nisa naima khalid.  (2022).  shear test of 3d printed polymer composites.  - 31st regional conference on solid state science and technology (rcssst2022).  1. 

gusti ayu arwati, edy herianto majlan, loh kee shyuan, khuzaimah ariffin , teuku husaini, sagir alva, wahyu muhammad, nabilah afiqah mohd radzuan.  (2022).  effect of chitosan on the corrosion inhibition for aluminium alloy.  - 23rd world hydrogen energy conference.  128-129. 

nabilah afiqah mohd radzuan.  (2022).  how to write a good executive summary.  - .  1-10. 

nabilah afiqah mohd radzuan.  (2022).  how to write a good literature review.  - .  1-10. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and farhana mohd foudzi.  (2021).  a review on bonding of polyamide reinforced carbon fibre via additive manufacturing.  - iop conf. series: materials science and engineering.  1-6. 

nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibon, abu bakar sulong and che hassan che haron.  (2021).  kenaf reinforced polypropylene composites: a numerical simulation.  - aip conference proceedings / 4th international sciences, technology & engineering conference (istec) 2020.  1-9. 

nabilah afiqah mohd radzuan, abu bakar sulong, anil verma, and norhamidi muhamad.  (2021).  layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review.  - nanotechnology reviews.  1-20. 

nabilah afiqah mohd. radzuan, abu bakar sulong, mohd. yusuf zakaria.  (2021).  komposit polimer pengalir revolusi teknologi pembuatan.  - .  218. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong and mohammad ashraf mohammad amin.  (2021).  3d printed polyamide-carbon fibre composites filament.  - 8th international conference on solid state science and technology (8th icssst 2021).  117. 

farhana mohd foudzi, minhalina ahmad buhairi, fathin iliana jamhari, abu bakar sulong, nabilah afiqah mohd radzuan, norhamidi muhamad, wan sharuzi wan harun, mohannad saleh hammadi al-furjan.  (2021).  effect of energy density on properties of additive manufactured ti6al4v via slm.  - international conference on powder metallurgy and particulate materials (powdermet2021).  434-448. 

nabilah afiqah mohd radzuan*, abu bakar sulong.  (2021).  adhesion behavior of 3d printed polyamide-carbon fibre composites filament.  - symposium on fuel cell and hydrogen technology 2021 (sfcht2021).  71. 

nabilah afiqah mohd radzuan, abu bakar sulong, iswandi.  (2021).  effect of multi-sized graphite filler on the mechanical properties and electrical conductivity.  - sains malaysiana.  2025-2034. 

nisa naima khalid, nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi.  (2021).  conductive polymer composites using 3d printing for electronic devices: a review.  - international conference on manufacturing engineering technology (iconmet).  94. 

nabilah afiqah mohd radzuan, mohd zamzuri ahmad shukri, nisa naima khalid.  (2021).  reinforced kenaf composite as a feeder for 3d printing application.  - international conference on manufacturing engineering technology (iconmet).  96. 

abu bakar bin sulong;che hassan bin che haron;norhamidi bin muhamad;nabilah afiqah binti mohd radzuan.  (2021).  kesan penambahan bahan nano terhadap ketahanan mekanikal dan fizikal kenaf polimer komposit bagi aplikasi automotif.  - .  . 

nabilah afiqah mohd radzuan, mihirssen gunasegran and nisa naima khalid.  (2021).  the effect of graphene addition on the youngs modulus and tensile strength of kenaf fibre composites.  - iop conf. series: materials science and engineering.  1-8. 

nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

bee huah lim, edy herianto majlan, ahmad tajuddin, teuku husaini, wan ramli wan daud, nabilah afiqah mohd radzuan, md. ahsanul haque.  (2021).  comparison of catalyst-coated membranes and catalyst-coated substratefor pemfc membrane electrode assembly: a review.  - chinese journal of chemical engineering.  1-16. 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong, nabilah afiqah mohd radzuan, mohd ramdhan mohd khalid, mohd rizal ahmad, mohd ikmal hafizi azaman, ahmad syazwan ramli, mohd azwan mohd bakri.  (2021).  problems and constraints involved in the injection moulding process of biocomposites: a review.  - advances in agricultural and food research journal.  1-14. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

derrick cheah seet leong, nabilah afiqah mohd radzuan, abu bakar sulong.  (2020).  effect of carbon nanotubes addition on the mechanical properties of kenaf/carbon nanotube/polypropylene composite.  - proceedings of the 4th international symposium on advanced materials and nanotechnology 2020.  259-264. 

nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibo, abu bakar sulong, che hassan che haron.  (2020).  numerical simulation analysis of kenaf reinforced polypropylene composites.  - international science, technology and engineering conference, (istec 2020).  15-17. 

nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

nabilah afiqah mohd radzuan, abu bakar sulong, farhana mohd foudzi, mohd yusuf zakaria and mohd ikram ramli.  (2020).  study on the influence mechanism of sintering hydroxyapatite (ha).  - journal of ceramic processing research.  662-666. 

i gusti ayu arwati, edy herianto majlan, lo kee shyuan, teuku husaini, sagir alva, muhajirin, nabilah afiqah mohd radzuan.  (2020).  the influence of temperature and electroforesis deposition green inhibitor on bipolar plate aa5052 in sulfuric acid medium.  - sains malaysiana.  3169-3177. 

farah atiqah abdul azam, nishata royan rajendran royan, nor yuliana yuhana, nabilah afiqah mohd radzuan, sahrim ahmad and abu bakar sulong.  (2020).  fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties.  - polymers.  1-14. 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu, ahmad tajuddin abdullah, teuku husaini, ros emilia rosli, edy herianto majlan, masli irwan rosli.  (2019).  fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on pem fuel cell bipolar plate.  - international journal of hydrogen energy.  30618-30626. 

nabilah afiqah mohd radzuan, nur farhani ismail, mohd khairul fadzly md radzi, zakaria bin razak, izdihar binti tharizi, abu bakar sulong, che hassan che haron, norhamidi muhamad.  (2019).  kenaf composites for automotive components: enhancement in machinability and moldability.  - polymers.  1-10. 

rosli, r.e., sulong, a.b., daud, w.r.w., zulkifley, m.a., rosli, m.i., majlan, e.h., haque, m.a. & radzuan n.a.m..  (2019).  the design and development of an ht-pemfc test cell and test station.  - international journal of hydrogen energy.  30763-30771. 

nabilah afiqah mohd radzuan , abu bakar sulong, david hui and anil verma.  (2019).  electrical conductivity performance of predicted modified fibre contact model for multi-filler polymer composite.  - polymers.  1-12.