Prosiding Terindeks

Norhamidi Muhamad and Hooman Abolhasani.  (2010).  Development of a starch-based binder in metal injection molding.  - Advanced Materials Research. 

Andanastuti Muchtar, Noorashrina A. Hamid,
Norhamidi Muhamad, Wan Ramli Wan Daud.  (2010).  Sintering Effects on LSCF Cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs).  - 2010 International Conference on Manufacturing Engineering and Automation, ICMEA2010; Guangzhou (Advanced Materials Research). 

K.R. Jamaludin, N. Muhamad, M.N.A. Rahman, Murtadhahadi, S. Ahmad, M.H.I. Ibrahim, N.H.M. Nor.  (2010).  Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction.  - Advanced Materials Research. 

Hamimah Abd.Rahman, Andanastuti Muchtar, Norhamidi Muhamad, Huda Abdullah.  (2010).  Electrophoretic deposition of La0.6Sr0.4Co0.2Fe0.8O3-? cathode film on stainless steel substrates.  - 2010 International Conference on Manufacturing Engineering and Automation, ICMEA2010; Guangzhou(Advanced Materials Research). 

Jarot Raharjo, Andanastuti Muchtar, Wan Ramli Wan Daud, Norhamidi Muhamad and Edy Heryanto Majlan.  (2010).  Fabrication of Dense Composite Ceramic Electrolyte SDC-(Li/Na)2CO3.  - Key Engineering Materials. 

Yazrina Yahya, Riza Sulaiman, Muriati Mukhtar, Salha Abdullah Norhamidi Muhammad.  (2010).  Engaging the SSME challenge: curriculum development for the Engineering Faculty at Universiti Kebangsaan Malaysia.  - Transforming Engineering Education: Creating Interdisciplinary Skills for Complex Global Evironments. 6-9 April 2010, Dublin, Ireland. 

Azami Zaharim, Yuzainee Md Yusoff, Azah Mohamed, Mohd Zaidi Omar, Norhamidi Muhamad, Ramlee Mustapha.  (2010).  Practical Framework of Employability Skills for Engineering Graduate in Malaysia.  - IEEE EDUCON Education Engineering 2010 - The Future of Global Learning Engineering Education, April 14-16, 2010, Madrid Spain. 

Mussa, M.A., S. Abdullah, C.S.N. Azwadi and N. Muhamad.  (2010).  Cubic-interpolated-pseudo-particle lattice boltzmann method for simulation of natural convection heat transfer in an enclosure with different aspect ratios.  - The 2nd International Conference on Computer and Automation Engineering (ICCAE), Singapore. 

Mohamad Nor N.H., Muhamad N., Jamaludin K.R., Ahmad S., Ibrahim M.H.I..  (2011).  Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system.  - International Conference on Advances in Materials and Processing Technologies, AMPT 2009(Advanced Materials Research). 

Li, H.P., Muhamad, N., Murthadhahadi.  (2011).  The characterization and flow behavior of 316L stainless steel feedstock for Micro Metal Injection Molding (μMIM).  - 2010 International Conference on Frontiers of Manufacturing and Design Science, ICFMD2010; Chongqing (Applied Mechanics and Materials). 

Harun, M.R., Muhamad, N., Sulong, A.B., Mohamad Nor, N.H., Jamaludin, K.R..  (2011).  The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system.  - 2011 International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2011; Chongqing (Advanced Materials Research). 

Yunn H.S., Muhamad N., Sulong A.B., Fayyaz A., Li H.P..  (2011).  Critical solid loading and rheological study of WC-10%Co.  - 2011 1st International Conference on Mechanical Engineering, ICME 2011; Phuket(Applied Mechanics and Materials). 

Muhamad N., Mohamad Nor N.H., Ahmad S., Ibrahim M.H.I., Harun M.R..  (2011).  Multiple performance optimization for the best injection molding process of Ti-6Al-4V green compact.  - 2010 International Conference on Frontiers of Manufacturing and Design Science, ICFMD2010; Chongqing(Applied Mechanics and Materials). 

Amin, YM; Muhamad, N; Jamaludin, KR; Fayyaza, A; Yunn, HS.  (2011).  Ball milling of WC-Co powder as injection molding feedstock.  - 2nd International Conference on Mechanical and Aerospace Engineering, ICMAE 2011;Bangkok. 

Ibrahim M.H.I., Muhamad N., Sulong A.B..  (2011).  Rheological characterization of water atomised stainless steel SS316L for micro MIM.  - International Conference on Advances in Materials and Processing Technologies, AMPT 2009 (Advanced Materials Research). 

Li H.P., Muhamad N..  (2011).  Rheological analysis of microminiature powder injection molding (μPIM) feedstock.  - 2011 1st International Conference on Mechanical Engineering, ICME 2011; Phuket (Applied Mechanics and Materials). 

Foudzi F.M., Muhamad N., Sulong A.B., Zakaria H..  (2011).  Flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding (μMIM).  - 2010 International Conference on Frontiers of Manufacturing and Design Science, ICFMD2010; Chongqing (Applied Mechanics and Materials). 

Li H.P., Muhamad N..  (2011).  Determination of optimal microminiature powder injection molding parameters by taguchi approach.  - Source: MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5 Book Series: Advanced Materials Research. 

Abolhasani H., Muhamad N..  (2011).  Debinding process of a starch-based binder in metal injection moulding.  - International Conference on Advances in Materials and Processing Technologies, AMPT 2009 (Advanced Materials Research). 

Li, HP; Muhamad, N.  (2011).  Feedstock Characterization for Micro Powder Injection Molding.  - Source: ADVANCED MANUFACTURING SYSTEMS, PTS 1-3 Book Series: (Advanced Materials Research). 

Hamimah Abd.Rahman, A. Muchtar, Norhamidi Muhamad
and Huda Abdullah.  (2011).  Influence of Processing Parameters on Electrophoretically Deposited La0.6Sr0.4Co0.2Fe0.8O3-delta Films.  - 8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010; Kuala Lumpur (Key Engineering Materials). 

S. Ahmad, N. Muhamad, A. Muchtar, J. Sahari, K. R. Jamaludin, M. H. I. Ibrahim and N. H. Mohamad Nor.  (2011).  Taguchi method for the determination of optimised sintering parameters of titanium alloy foams.  - Proceedings of the Advances in Materials and Processing Technologies (AMPT 2009), Kuala Lumpur (Advanced Materials Research). 

Muhammed Ali, S.A., Muchtar, A., Muhamad, N., Sulong, A.B..  (2011).  A review on preparation of SDC-carbonate as composite electrolyte material for intermediate temperature Solid Oxide Fuel Cells (IT-SOFC).  - 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011; Kuala Lumpur. 

Johari J., Wahab D.A., Sahari J., Abdullah S., Ramli R., Yassin R.M., Muhamad N..  (2011).  Systematic infusion of creativity in engineering design courses.  - Kongres Pengajaran dan Pembelajaran UKM, 2010; Tanjung Keling, Melaka. 

Johari J., Sahari J., Abd Wahab D., Abdullah S., Abdullah S., Omar M.Z., Muhamad N..  (2011).  Difficulty index of examinations and their relation to the achievement of programme outcomes.  - Kongres Pengajaran dan Pembelajaran UKM, 2010; Tanjung Keling, Melaka. 

Jamaludin K.R., Muhamad N., Rahman M.N.Ab., Ahmad S., Ibrahim M.H.I., Nor N.H.M..  (2011).  Orthogonal array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength.  - International Conference on Advances in Materials and Processing Technologies, AMPT 2009(Advanced Materials Research). 

Ibrahim M.H.I., Muhamad N., Sulong A.B., Jamaludin K.R., Nor N.H.M., Ahmad S..  (2011).  Optimization of micro metal injection molding SS 316L for the highest green strength by using Taguchi method.  - International Conference on Advances in Materials and Processing Technologies, AMPT 2009(Advanced Materials Research). 

Li H.P., Muhamad N., Sulong A.B., Yunn H.S., Abolhasani H..  (2011).  Application of Taguchi method for parameters optimization in micro metal injection molding.  - 2011 1st International Conference on Mechanical Engineering, ICME 2011; Phuket; 3 April 2011 through 4 April 2011 (Applied Mechanics and Materials). 

Jamaludin K.R., Muhamad N., Abolhasani H., Murtadhahadi, Rahman M.N.Ab..  (2011).  An influence of a binder system to the rheological behavior of the SS316l Metal Injection Molding (MIM) feedstock.  - International Conference on Advances in Materials and Processing Technologies, AMPT 2009; 26 October 2009 through 29 October 2009 (Advanced Materials Research). 

Harun M.R., Muhamad N., Sulong A.B., Nor N.H.M., Ibrahim M.H.I..  (2011).  Rheological investigation of ZK60 magnesium alloy feedstock for metal injection moulding using palm stearin based binder system.  - 2010 International Conference on Frontiers of Manufacturing and Design Science, ICFMD2010; Chongqing (Applied Mechanics and Materials). 

Mohd Zulkefli Selamat, Jaafar Sahari, Norhamidi Muhamad and Andanastuti Muchtar.  (2011).  Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite - Polypropylene Using Taguchi Method.  - 8th International Conference on Composite Science and Technology, ICCST8; Kuala Lumpur (Key Engineering Materials). 

Muhammad Ilman Hakimi Chua, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Fazuri Abdullah and Che Hassan Che Haron.  (2011).  Optimization of injection parameters using 16mum stainless steel powder (SS316L) at 63 vol. %, 63.5 vol. % and 64 vol. % powder loading by taguchi method for metal injection molding.  - 8th International Conference on Composite Science and Technology, ICCST8; Kuala Lumpur(Key Engineering Materials). 

Mojgan Ahmadrezaei, Andanastuti Muchtar, Norhamidi Muhamad, C.Y.Tan.  (2011).  Preparation and evaluation of BaxSr(x-1)CoyFe(y-1)O3delta nanomaterial for SOFC cathode by oxalate co-precipitation (x=0.2, y=0.8).  - 2011 1st International Conference on Mechanical Engineering, ICME 2011 (Applied Mechanics and Materials); Phuket. 

Dedikarni, Andanastuti Muchtar, Norhamidi Muhamad and
Wan Ramli Wan Daud.  (2011).  Microstructure characterisation of Ag2O3-Bi2O3 composite cathodes for intermediate temperature solid oxide fuel cells (IT-sofcs).  - 8th International Conference on Composite Science and Technology Location: Kuala Lumpur, MALAYSIA (Key Engineering Materials). 

Jarot Raharjo, Andanastuti Muchtar, Wan Ramli Wan Daud, Norhamidi Muhamad and Edy Herianto Majlan.  (2011).  Fabrication of Porous LSCF-SDC Carbonates Composite Cathode for Solid Oxide Fuel Cell (SOFC) Applications.  - 8th International Conference on Composite Science and Technology, ICCST8; Kuala Lumpur (Key Engineering Materials). 

Hamimah Abd.Rahman, Andanastuti Muchtar, Norhamidi Muhamad and Huda Abdullah.  (2011).  Fabrication and Characterisation of La0.6Sr0.4Co0.2Fe0.8O3-delta-SDC Composite Cathode.  - 8th International Conference on Composite Science and Technology, ICCST8; Kuala Lumpur (Key Engineering Materials). 

Mohd Fazuri Abdullah, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Ilman Hakimi Chua Abdullah, Nor Hamdan Nor Yahya.  (2011).  Comparison on rheology properties of polypropylene and polyethylene as binder system with stainless steel 316L for metal injection moding.  - Key Engineering Materials. 

Jarot Raharjo, Andanastuti Muchtar, Wan Ramli Wan Daud,
Norhamidi Muhamad and Edy Herianto Majlan.  (2011).  Porous NiO-SDC Carbonates Composite Anode for LT-SOFC Applications Produced by Pressureless Sintering.  - 2011 1st International Conference on Mechanical Engineering, ICME 2011 (Applied Mechanics and Materials); Phuket. 

Harun, M.R., Muhamad, N., Sulong, A.B., Mohamad Nor, N.H., Jamaludin, K.R..  (2012).  Metal injection moulding of ZK60 magnesium alloy powder using palm stearin based binder system.  - 14th International Conference on Advances in Materials and Processing Technologies, AMPT 2011;Istanbul (Advanced Materials Research). 

Baba Md Deros, Azah Mohamed, Norhamidi Mohamed, Ahmad Kamal Ariffin Mohd Ihsan.  (2012).  A study of alumni feedback on outcome based education in the Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia.  - Procedia Social and Behavioral Sciences - UKM Teaching and Learning Congress 2011. 

Baba Md Deros, Norhamidi Mohamed, Nizaroyani Saibani, Norashikin Rahman.  (2012).  Improving teaching and learning effectiveness through customers feedback.  - Procedia Social and Behavioral Sciences - UKM Teaching and Learning Congress 2011. 

N. Saibani*, B. M. Deros, N. Muhamad, D. A. Wahab, J. Sahari.  (2012).  The influence of type of race among engineering students towards the level of Emotional Intelligence (EQ) scores.  - Procedia Social and Behavioral Sciences - International Conference on Teaching and Learning in Higher Education (ICTLHE 2012) in conjunction with RCEE & RHED 2012. 

Nizaroyani Saibani, Norhamidi Muhamad, Dzuraidah Abd Wahab, Jaafar Sahari.  (2012).  Level of Emotional Intelligence (EQ) scores among Engineering students during course enrollment and course completion.  - Procedia Social and Behavioral Sciences - UKM Teaching and Learning Congress 2011. 

Bashah, N.A.K., Zakaria, A., Kamarulzaman, K.Z., Mobin, A., Lazat, M.S.M.A., Muhamad, N., Md Deros, B..  (2012).  Accurate prediction of springback in forming of BIW parts.  - Regional Conference on Automotive Research, ReCAR 2011;Kuala Lumpur (Applied Mechanics and Materials). 

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Riza Atiq Abdullah O.K. Rahmat.  (2012).  Measuring engineering employability skills.  - Technology Innovations in Education - Proceedings of the 8th WSEAS International Conference on Educational Technologies (EDUTE `12). 

Hassan, N; Ahmad, S; Muhamad, N; Omar, MA.  (2012).  Thermoplastic natural rubber (TPNR) as a backbone binder for metal injection molding process.  - 2011 International Symposium on Materials Science and Engineering Technology, ISMSET 2011;Dubai (Advanced Materials Research). 

Jaafar Sahari, Norhamidi Muhamad, Dzuraidah Abd Wahab, Juridah Johari.  (2012).  Assessment of engineering common sense among newly enrolled students of mechanical and manufacturing engineering programs.  - Procedia Social and Behavioral Sciences. 

Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramlee Mustapha And Riza Atiq Abdullah O.K. Rahmat.  (2012).  Engineering employability skills for Malaysian industry: framework.  - Proceedings of the 8th WSEAS International Conference on Educational Technologies (EDUTE`12). 

Sri Yulis M. Amin, Norhamidi Muhamad, Khairur Rijal Jamaludin, Abdolali Fayyaz & Heng Shye Yunn.  (2012).  Ball Milling OF WC-Co Powder as Injection Molding Feedstock.  - Applied Mechanics and Materials. 

Sarizal Md Ani, Andanastuti Muchtar, Norhamidi Muhamad, and Jaharah A. Ghani.  (2013).  Effects of injection temperature and pressure on green part density for ceramic injection molding.  - Advanced Materials Research. 

Sarizal Md Ani, Andanastuti Muchtar, Norhamidi Muhamad and Jaharah A. Ghani.  (2013).  Optimum Powder Loading of Feedstock based on an Alumina-zirconia Powder for Ceramic Injection Molding.  - Advanced Materials Research. 

Sarizal Md Ani, Andanastuti Muchtar, Norhamidi Muhamad, Jaharah A. Ghani.  (2013).  Rheological properties of zirconia toughened alumina powder for ceramic injection molding.  - Advanced Materials Research. 

Hamimah Abd. Rahman, Andanastuti Muchtar, Norhamidi Muhamad, Huda Abdullah.  (2014).  Influence of Calcination on the Properties of La0.6Sr0.4Co0.2Fe0.8O3-d- Samarium Doped Ceria Carbonate.  - Applied Mechanics and Materials, Trans Tech Publications, Switzerland. 

Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar & Mohd Yusuf Zakaria.  (2016).  Powder injection molding of Ti6Al4V-W composite: rheological properties.  - Proceedings Of International Conference On Advanced Processes And Systems In Manufacturing (APSIM 2016).  13-14. 

Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Dulina Tholibon, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi & Zakaria Razak.  (2016).  Tensile properties of unidirectional kenaf fibre reinforced polylactic-acid composites.  - Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016). 

Mohd Razali R.N., Abdullah B., Ismail M.H., Muhamad N..  (2016).  Characteristic of modified geometrical open-cell aluminium foam by casting replication process.  - Materials Science Forum.  37-41. 

Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Izdihar Tharazi & Mohd Khairul Fadzly Md Radzi.  (2016).  Process optimization of unidirectional kenaf polypropylene composites by full factorial design.  - Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016). 

Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Khairul Fadzly Md Radzi, Dulina Tholibon, Izdihar Tharazi & Nur Farhani Ismail.  (2016).  Mechanical properties of injection moulded for multi-walled carbon nanotube/ kenaf/ polypropylene hybrid composites.  - Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016). 

Mohd Khairul Fadzly Md Radzi, Abu Bakar Sulong, Norhamidi Muhamad & Zakaria Razak.  (2016).  Optimization of injection molding parameters for Kenaf/PP composite using Taguchi method.  - Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016). 

Ukwueze Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad & Zainuddin Sajuri.  (2016).  Rheological investigation of powder injection molding materials using polyethylene with palm stearin binder system.  - Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016). 

Tharazi, I., Sulong, A.B., Muhamad, N., Haron, C.H.C., Tholibon, D., Ismail., N.F., Radzi, M.K.F.M., Razak, Z..  (2017).  Optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - Advances in Material and Processing Technologies Conference, AMPT 2017 (Procedia Engineering). 

N Emira Binti Azaman, M Rafi Raza, N Muhamad, M Niaz Akhtar & A Bakar Sulong.  (2017).  Rheological study of copper and copper grapheme feedstock for powder injection molding.  - 2nd International Conference on Rheology and Modeling of Materials, IC-RMM 2015 (Journal of Physics: Conference Series). 

Mohd Khairul Fadzly Md Radzi, Norhamidi Muhamad, Abu Bakar Sulong & Zakaria Razak.  (2017).  Optimizing injection parameters of kenaf filler polypropylene composite by taguchi method.  - 1st International Conference on Frontiers of Composite Materials, ICFCM 2016. 

Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad & Mohd Ikram Ramli.  (2017).  Feedstock preparation of titanium-hydroxyapatite with temporary space holder for powder injection molding.  - Advanced Processes and Systems in Manufacturing An International Conference 2016.  1-2.