Prosiding Terindeks

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2018).  extrusion process of polypropylene composites reinforced milled carbon fibre for conductive polymer composite application.  - 4th engineering science and technology international conference (estic 2018).  65-69. 

mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong & zakaria razak.  (2017).  optimizing injection parameters of kenaf filler polypropylene composite by taguchi method.  - 1st international conference on frontiers of composite materials, icfcm 2016. 

tharazi, i., sulong, a.b., muhamad, n., haron, c.h.c., tholibon, d., ismail., n.f., radzi, m.k.f.m., razak, z..  (2017).  optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - advances in material and processing technologies conference, ampt 2017 (procedia engineering). 

mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad & mohd ikram ramli.  (2017).  feedstock preparation of titanium-hydroxyapatite with temporary space holder for powder injection molding.  - advanced processes and systems in manufacturing an international conference 2016.  1-2. 

amir ariffin & abu bakar sulong.  (2017).  effect of mixing parameters on the mixing time and density of composite ha/ti6al4v feedstock for powder injection molding.  - 1st sriwijaya international conference on engineering, science and technology, sicest 2016. 

n emira binti azaman, m rafi raza, n muhamad, m niaz akhtar & a bakar sulong.  (2017).  rheological study of copper and copper grapheme feedstock for powder injection molding.  - 2nd international conference on rheology and modeling of materials, ic-rmm 2015 (journal of physics: conference series). 

tholibon, d., sulong, a.b., ismail, n.f., tharazi, i., md radzi & m.k.f..  (2017).  unidirectional kenaf polypropylene composites: optimization process by two level full factorial.  - 1st international conference on frontiers of composite materials, icfcm 2016. 

ukwueze bonaventure emeka, abu bakar sulong, norhamidi muhamad & zainuddin sajuri.  (2016).  rheological investigation of powder injection molding materials using polyethylene with palm stearin binder system.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016). 

izdihar tharazi, abu bakar sulong, norhamidi muhamad, che hassan che haron, dulina tholibon, nur farhani ismail, mohd khairul fadzly md radzi & zakaria razak.  (2016).  tensile properties of unidirectional kenaf fibre reinforced polylactic-acid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016). 

nishata royan rajendran royan, abu bakar sulong, nor yuliana yuhana mohd, hafizuddin ab ghani & sahrim ahmad.  (2016).  effect of uv/o3 modified rh on the tensile properties of rhdpe/rh composite.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016). 

dulina tholibon, abu bakar sulong, norhamidi muhamad, nur farhani ismail, izdihar tharazi & mohd khairul fadzly md radzi.  (2016).  process optimization of unidirectional kenaf polypropylene composites by full factorial design.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016). 

zakaria razak, abu bakar sulong, norhamidi muhamad, mohd khairul fadzly md radzi, dulina tholibon, izdihar tharazi & nur farhani ismail.  (2016).  mechanical properties of injection moulded for multi-walled carbon nanotube/ kenaf/ polypropylene hybrid composites.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016). 

mohd khairul fadzly md radzi, abu bakar sulong, norhamidi muhamad & zakaria razak.  (2016).  optimization of injection molding parameters for kenaf/pp composite using taguchi method.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016). 

mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar & mohd yusuf zakaria.  (2016).  powder injection molding of ti6al4v-w composite: rheological properties.  - proceedings of international conference on advanced processes and systems in manufacturing (apsim 2016).  13-14. 

amir arifin, abu bakar sulong, norhamidi muhamad, junaidi syarif, mohd ikram ramli.  (2014).  ha/ti6al4v powder with palm stearin binder system - feedstock characterization.  - applied mechanics and materials.  372-375. 

h. suherman, j. sahari, a. b. sulong, s. astuti, e. septe.  (2014).  properties of epoxy/carbon black/graphite composites for bipolar plate in polymer electrolyte membrane fuel cell.  - advanced materials research.  8-12. 

n.a. baharuddin, a. muchtar, a.b. sulong, h. abdullah.  (2013).  fabrication methods for planar solid oxide fuel cells : a review.  - advanced materials research. 

nurul akidah baharuddin, andanastuti muchtar, abu bakar sulong & huda abdullah.  (2013).  effect of deposition time on lscf-sdc carbonate thin film formation by the electrophoretic deposition method.  - advanced materials research. 

eshkour, ra; ariffin, ak; zulkifli, r; sulong, ab; azhari, ch.  (2012).  the failure mode of natural silk epoxy triggered composite tubes.  - 1st international conference on mechanical engineering research 2011 (icmer);kuantan ( iop conference series-materials science and engineering). 

harun, m.r., muhamad, n., sulong, a.b., mohamad nor, n.h., jamaludin, k.r..  (2012).  metal injection moulding of zk60 magnesium alloy powder using palm stearin based binder system.  - 14th international conference on advances in materials and processing technologies, ampt 2011;istanbul (advanced materials research). 

muhammad ilman hakimi chua, abu bakar sulong, norhamidi muhamad, mohd fazuri abdullah and che hassan che haron.  (2011).  optimization of injection parameters using 16mum stainless steel powder (ss316l) at 63 vol. %, 63.5 vol. % and 64 vol. % powder loading by taguchi method for metal injection molding.  - 8th international conference on composite science and technology, iccst8; kuala lumpur(key engineering materials). 

harun, m.r., muhamad, n., sulong, a.b., mohamad nor, n.h., jamaludin, k.r..  (2011).  the development of metal injection moulding for zk60 magnesium alloy using palm stearin based binder system.  - 2011 international conference on frontiers of manufacturing science and measuring technology, icfmm 2011; chongqing (advanced materials research). 

yunn h.s., muhamad n., sulong a.b., fayyaz a., li h.p..  (2011).  critical solid loading and rheological study of wc-10%co.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials). 

harun m.r., muhamad n., sulong a.b., nor n.h.m., ibrahim m.h.i..  (2011).  rheological investigation of zk60 magnesium alloy feedstock for metal injection moulding using palm stearin based binder system.  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials). 

ibrahim m.h.i., muhamad n., sulong a.b..  (2011).  rheological characterization of water atomised stainless steel ss316l for micro mim.  - international conference on advances in materials and processing technologies, ampt 2009 (advanced materials research). 

hendra suherman, abu bakar sulong, jaafar sahari.  (2011).  electrical properties of carbon nanotubes-based epoxy nanocomposites for high electrical conductive plate.  - international conference on advances in materials and processing technology (ampt) (advanced materials research), shah alam, kuala lumpur, malaysia. 

foudzi f.m., muhamad n., sulong a.b., zakaria h..  (2011).  flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding (μmim).  - 2010 international conference on frontiers of manufacturing and design science, icfmd2010; chongqing (applied mechanics and materials). 

iswandi, sahari, j., sulong, a.b..  (2011).  effects of different particles sizes of graphite on the engineering properties of graphites/polypropylene composites on injection molding aplication.  - 8th international conference on composite science and technology, iccst8 (key engineering materials); kuala lumpur. 

ramli, i.s., arshad, h., sulong, a.b., yahaya, n.h.mohd., che haron, c.h..  (2011).  enhancing learning experience of novice surgeon with virtual training system for jig and fixture usage.  - 2nd international visual informatics conference, ivic 2011; selangor (lecture notes in computer science). 

muhammed ali, s.a., muchtar, a., muhamad, n., sulong, a.b..  (2011).  a review on preparation of sdc-carbonate as composite electrolyte material for intermediate temperature solid oxide fuel cells (it-sofc).  - 2011 ieee 1st conference on clean energy and technology, cet 2011; kuala lumpur. 

ibrahim m.h.i., muhamad n., sulong a.b., jamaludin k.r., nor n.h.m., ahmad s..  (2011).  optimization of micro metal injection molding ss 316l for the highest green strength by using taguchi method.  - international conference on advances in materials and processing technologies, ampt 2009(advanced materials research). 

suherman h., sahari j., sulong a.b..  (2011).  optimization mixing parameters on the electrical conductivity of polymer nanocomposites based on the taguchi method.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket(applied mechanics and materials). 

siti saniah ab. karim, abu bakar sulong, che husna azhari, ng min hwei and mohd reusmaazran yusof.  (2011).  influence of polyacrilonitrile (pan) concentration on the mechanical and physical properties of electrospun fibres.  - key engineering materials. 

mohd fazuri abdullah, abu bakar sulong, norhamidi muhamad, muhammad ilman hakimi chua abdullah, nor hamdan nor yahya.  (2011).  comparison on rheology properties of polypropylene and polyethylene as binder system with stainless steel 316l for metal injection moding.  - key engineering materials. 

abu bakar sulong, abdullah atiq ariffin, jaafar sahari, and hendra suherman.  (2011).  analysis of energy absorption on pultruded composite tube under oblique loading.  - 8th international conference on composite science and technology location: kuala lumpur, malaysia (key engineering materials). 

r. nishata royan, abu bakar sulong, jaafar sahari.  (2011).  effect of loading concentration on the electrical and hardness properties of mwcnt/epoxy nanocomposites.  - key engineering materials. 

r. nishata royan, abu bakar sulong, hendra suherman and
jaafar sahari.  (2011).  effect of wet oxidation on the dispersion and electrical properties of multi-walled carbon nanotubes /epoxy nanocomposites.  - 8th international conference on composite science and technology, iccst8 (key engineering materials); kuala lumpur. 

li h.p., muhamad n., sulong a.b., yunn h.s., abolhasani h..  (2011).  application of taguchi method for parameters optimization in micro metal injection molding.  - 2011 1st international conference on mechanical engineering, icme 2011; phuket; 3 april 2011 through 4 april 2011 (applied mechanics and materials). 

mohd fazuri abdullah, abu bakar sulong, ilman hakimi chua, che hassan che haron, jaharah a. ghani.  (2010).  effects of insert nose radius and machining parameters on the surface roughness of stainless steel 316l.  - key engineering materials. 

abu bakar sulong, muhammad ilman hakimi, mohd fazuri abdullah, san wei koon, nor hamdan nor yahya, rizauddin ramli.  (2010).  design approach for jig in computer assisted total knee replacement surgery.  - key engineering materials. 

mohd halim irwan ibrahim, norhamidi muhamad, abu bakar sulong, khairur rijal jamaludin, nor hafiez mohamad nor, sufizar ahmad, mohd ruzi harun and hafizawati zakaria.  (2010).  parameter optimization towards highest micro mim density by using taguchi method.  - key engineering materials. 

abu bakar sulong, gan tek keong, jaafar sahari.  (2010).  effects of molding parameters and addition of fillers on gate chip.  - key engineering materials. 

intan syaheera ramli, haslina arshad, nor hamdan mohd yahaya, abu bakar sulong.  (2010).  development of visualization application (vjbk) for newly designed jig and fixture for computer-assisted knee replacement surgery.  - business transformation through innovation and knowledge management: an academic perspective, istanbul turkey. 

hendra suherman, jaafar sahari, abu bakar sulong.  (2010).  electrical conductivity and micro hardness of synthetic and natural.  - key engineering materials. 

hendra suherman, jaafar sahari, abu bakar sulong and nishata royan.  (2010).  electrical conductivity and flexural strength of graphite/carbon nanotubes/epoxy nanocomposites.  - key engineering materials. 

intan syaherra ramli, haslina arshad, abu bakar sulong, nor hamdan mohd yahaya, and che hassan che haron.  (2009).  visualization of the newly designed jig and fixture for computer-assisted knee replacement surgery.  - lecture notes in computer science.