Prosiding Terindeks

a.z. rosli, m.r. somalu, n. osman, n.a. hamid.  (2021).  physical characterization of lscf-nio as cathode material for intermediate temperature solid oxide fuel cell (it-sofcs).  - regional congress on membrane technology 2020 and regional conference environmental engineering.  1895-1900. 

wan nor anasuhah wan yusoff, nurul akidah baharuddin*, mahendra rao somalu, andanastuti muchtar, abdullah abdul samat.  (2020).  a short review on selection of electrodes materials for symmetrical solid oxide fuel cell.  - iop conf. series: materials science and engineering.  1-5. 

abdullah abdul samat, siti hajar alias, murizam darus, mahendra rao somalu, nurul akidah baharuddin, nafisah osman.  (2020).  thermal decomposition, phase formation and microstructure analysis of surfactant assisted sol-gel derived la0.6sr0.4coo3-d material.  - iop conference series: earth and environmental science.  1-6. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar and nafisah osman.  (2019).  electrochemical performance of la0.6sr0.4coo3-d cathode in air and wet air for bace0.54zr0.36y0.1o3-based protonconducting solid oxide fuel cell.  - iop conference series: earth and environmental science.  1-6. 

abdullah abdul samat, mahendra rao somalu, andanastuti muchtar, nurul akidah baharuddin and nafisah osman.  (2019).  optimisation of screen-printed la0.6sr0.4coo3-d cathode film for intermediate temperature proton-conducting solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-6. 

wan nor anasuhah wan yusoff, nur wardah norman, abdullah abdul samat, mahendra rao somalu, andanastuti muchtar and nurul akidah baharuddin.  (2019).  performance of lico0.6zn0.4o2 as a potential cathode material candidate for intermediate solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-6. 

nurul akidah baharuddin, wan nor anasuhah wan yusoff, andanastuti muchtar, mahendra rao somalu, abdullah abdul samat, mustafa anwar.  (2019).  influence of layer numbers on the structural and electrical performance of cobalt-free srfe0.5ti0.5o3-d cathode for ntermediate-temperature solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-5. 

abdul azim jais, mahendra rao somalu, andanastuti muchtar, wan nor roslam wan isahak.  (2019).  carbon deposition properties of ni0.5m0.5/10sc1cesz (m = cu, co and fe) cermet anode for dry reforming methane-fuelled solid oxide fuel cells.  - iop conference series: earth and environmental science.  1-6. 

nafisah osman, abdullah abdul samat, wan zuliana wan zulkifli, mahendra rao somalu, andanastuti muchtar, abdul mutalib md jani, oskar hasdinor hassan.  (2019).  sol-gel synthesis of solid solution based on cerate-zirconate ceramics.  - 6th international conference on solid state science and technology, icssst 2017 (solid state phenomena).  29-34. 

c k ng, s ramesh, c y tan, a muchtar, m r somalu, w s samuel lew, c h ting, y d chuah and u sutharsini.  (2019).  thermal stability behaviour of scandia stabilised zirconia.  - iop conference series: earth and environmental science.  1-6. 

n w norman, w n a wan yusoff, a a jais, m r somalu and a muchtar.  (2019).  development of sr0.6ba0.4ce0.9pr0.1o3-d electrolyte for proton-conducting solid oxide fuel cell application.  - iop conference series: earth and environmental science.  1-6. 

nur lina rashidah rashid, mahendra rao somalu, andanastuti muchtar, wan nor roslam wan isahak.  (2019).  properties of pr and in-doped bazrcey-based electrolyte for proton conducting fuel cell systems.  - iop conference series: earth and environmental science.  1-6. 

ahmad zubair yahaya, mahendra rao somalu, andanastuti muchtar, shaharin anwar sulaiman, wan ramli wan daud.  (2019).  characterization of tar formation during high temperature gasification of different chemical compositions in biomass.  - iop conference series: earth and environmental science.  1-6. 

abdalla m. abdalla, shahzad hossain, nikdalila radenahmad, pg m.i. petra, mahendra r. somalu, seikh m. h. rahman, sten g. eriksson, abul k. azad.  (2018).  synthesis and characterization of sm1-xzrxfe1-ymgyo3 (x, y = 0.5, 0.7, 0.9) as possible electrolytes for sofcs.  - 8th international conference on advanced materials research, icamr 2018 (advanced materials research vii). 

nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2018).  extrusion process of polypropylene composites reinforced milled carbon fibre for conductive polymer composite application.  - 4th engineering science and technology international conference (estic 2018).  65-69. 

nurul akidah baharuddin, andanastuti muchtar, mahendra rao somalu, abdullah abdul samat.  (2016).  thermal decomposition of cobalt-free srfe0.9ti0.1o3-d cathode for intermediate temperature solid oxide fuel cell.  - procedia engineering.  72-77. 

hoa ng kei, hamimah abd rahman, mahendra rao somalu.  (2016).  preparation of nickel oxide-samarium-doped ceria carbonate composite anode powders by using high-energy ball milling for low-temperature solid oxide fuel cells.  - materials science forum.  97-102. 

lily siong @ mahmud, andanastuti muchtar, mahendra rao somalu.  (2015).  review on anode material development in solid oxide fuel cells.  - aip conference proceedings.  1-5. 

somalu m.r., muchtar a., brandon n.p..  (2015).  understanding the rheology of screen-printing inks for the fabrication of sofc thick films.  - ecs transactions.  1323-1331. 

f. tariq, v. yufit, m. kishimoto, g. cui, m. somalu and n. brandon.  (2014).  advanced 3d imaging and analysis of sofc electrodes.  - ecs transaction: symposium on solid state ionic devices 10 held during the 226th meeting of the electrochemical-society, cancun, mexico.  64(2):81-86. 

m. r. somalu, a. muchtar, m. g. baboli, v. yufit, i. p. shapiro, p. xiao dan n. p. brandon.  (2013).  understanding the relationship between ink rheology and film properties for screen-printed nickel/scandia-stabilized-zirconia anodes.  - ecs transactions : 13th international symposium on solid oxide fuel cells (sofc-xiii).