prof. dr. che hassan bin che haron

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan

No. Telefon Rasmi :  0389118416

No. rasmi:
UKM : 03 8921 5555



   Biografi/ Biography :

  • Che Hassan Che Haron is a Professor at the Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment at the Universiti Kebangsaan Malaysia. He is currently the Leader of Cluster for research for Frontier and Digital Technologies Cluster at Universiti Kebangsaan Malaysia. He was the Deputy Dean for Research and Innovation for Faculty of Engineering and Built Environments, UKM. He is also the Head of Cluster for Advanced Technology and Smart Manufacturing Cluster and Research University Committee Member at the Ministry of Higher Education of Malaysia. He is also MyRA Task Force and auditor for the Ministry of Higher Education of Malaysia. He was the Director for Research Management Centre in The National University of Malaysia. He obtain his BSc in Mechanical Engineering in 1985 from University of Bridgeport, CT. USA and M S in Mechanical Engineering in 1989 from University of Pittsburgh, PA, USA. He obtain his PhD in Manufacturing Engineering from Coventry University, United Kingdom in 1999. His research interests are in the manufacturing and productions engineering, specifically, in machining, cutting tool technology, tribology and machinability of difficult to machine materials such as titanium, Inconel 718 and composite materials. He also involved in wear of cutting tools, chip formation and the application of response surface methodology for design of experiment. He has published more than 200 journal articles and conference papers. He has obtained 5 patents and 1 industrial design.

  • nabil jouini, mohd shahfizal mohd ruslan, jaharah a. ghani and che hassan che haron.  (2023).  sustainable high-speed milling of magnesium alloy az91d in dry and cryogenic conditions.  - suatainability.  1-14. 

     

    jaharah bt. a ghani;che hassan bin che haron;manal binti ismail;rizauddin bin ramli;wan fathul hakim bin w. zamri.  (2022).  development of a nano-scale mql system to enhance the performance of cutting fluids in machining process.  -

     

    ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  potential of bio-metal cutting fluid from treated recycled cooking oil for metal cutting fluid application.  - journal of mechanical engineering.  83-97. 

     

    norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  -

     

    tahrin othman, haniff abdul rahman, jaharah a. ghani, che hassan che.  (2022).  surface roughness in high speed turning of alloy steel m303 using carbide tools in dry cutting condition.  - jurnal kejuruteraan.  1169-1173. 

     

    nabil jouini, mohd shahfizal mohd ruslan, jaharah a. ghani and che hassan che haron.  (2023).  sustainable high-speed milling of magnesium alloy az91d in dry and cryogenic conditions.  - suatainability.  1-14. 

     

    shalina sheik muhamad, jaharah a. ghani 1, che hassan che haron, and hafizal yazid.  (2022).  wear mechanism of multilayer coated carbide cutting tool in the milling process of aisi 4340 under cryogenic environment.  - materials.  1-12. 

     

    nur farhani ismail, nabilah afiqah mohd radzuan, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2021).  the effect of alkali treatment on physical, mechanical and thermal properties of kenaf fiber and polymer epoxy composites.  - polymers.  1-17. 

     

    shalina sheik muhamad, jaharah a. ghani, che hassan che haron, and hafizal yazid.  (2020).  cryogenic milling and formation of nanostructured machined surface of aisi 4340.  - nanotechnology reviews.  1104-1117. 

     

    nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

     

    ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  effect of cutting parameters on tool life during end milling of aisi 4340 under mql condition.  - industrial lubrication and tribology.  392-401. 

     

    n. a. kasim, m. z. nuawi, j. a. ghani, muhammad rizal, n. a. ngatiman & c. h. c. haron.  (2021).  enhancing clustering algorithm with initial centroids in tool wear region recognition.  - international journal of precision engineering and manufacturing.  843-863. 

     

    shalina sheikh muhamad, jaharah a. ghani, che hassan che haron, hafizal yazid.  (2020).  wear mechanism of a coated carbide tool in cryogenic machining of aisi 4340.  - industrial lubrication and tribology.  509-514. 

     

    ping chuan siow, jaharah a. ghani, muhammad rizal, talib ria jaafar, mariyam jameelah ghazali, che hassan che haron.  (2019).  surface characterisation of ticxn1x coatings processed by cathodic arc physical vapour deposition: xps and xrd analysis.  - surface and interface analysis.  611-617. 

     

    n. a. kasim, m. z. nuawi, j. a. ghani, m. rizal, m. a. f. ahmad and c. h. che haron.  (2019).  cutting tool wear progression index via signal element variance.  - journal of mechanical engineering and sciences.  4596-4612. 

     

    nabil jouini, mohd shahfizal mohd ruslan, jaharah a. ghani and che hassan che haron.  (2023).  sustainable high-speed milling of magnesium alloy az91d in dry and cryogenic conditions.  - suatainability.  1-14. 

     

    ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  potential of bio-metal cutting fluid from treated recycled cooking oil for metal cutting fluid application.  - journal of mechanical engineering.  83-97. 

     

    haniff abdul rahman, muhammad rizal, jaharah a. ghani, muhammad amirul syahfikri mazlan, mohd zaki nuawi1, che hassan che haron, mohd nur alfath suliman, abdul hadi mehamud zelun.  (2022).  semiconductor strain gauges as potential replacement to metal foil for cutting force measurement in machining process.  - jurnal tribologi.  137-147. 

     

    ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  effect of cutting parameters on tool life during end milling of aisi 4340 under mql condition.  - industrial lubrication and tribology.  392-401. 

     

    shalina sheik muhamad, jaharah a. ghani 1, che hassan che haron, and hafizal yazid.  (2022).  wear mechanism of multilayer coated carbide cutting tool in the milling process of aisi 4340 under cryogenic environment.  - materials.  1-12. 

     

    nabilah afiqah mohd radzuan, mohammad afiq rashid, dulina tholibon, abu bakar sulong and che hassan che haron.  (2021).  kenaf reinforced polypropylene composites: a numerical simulation.  - aip conference proceedings / 4th international sciences, technology & engineering conference (istec) 2020.  1-9. 

     

    nurul hayati abdul halim, che hassan che haron, jaharah abdul ghani, and muammar faiq azhar.  (2021).  optimization of surface roughness in cryogenic co2 milling of inconel 718 using rsm.  - lecture notes in mechanical engineering,.  409-422. 

     

    shalina sheik muhamad, jaharah a. ghani1, che hassan che haron , hafizal yazid.  (2020).  the effects of cutting environment on surface roughness and tool life in milling of aisi 4340.  - 3rd international conference on advances in mechanical engineering (icame 2020).  xx. 

     

    h. azmi, c.h. c. haron, j. a. ghani, m. suhaily & a.r. yuzairi.  (2018).  machinability study on milling kenaf fiber reinforced plastic composite materials using design of experiments.  - iop conf. series: materials science and engineering. 

     

    m. suhaily, c.h. che hassan, a.g. jaharah, h azmi, m.a. afifah & m.k.nor khairusshima.  (2018).  study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills.  - 6th international conference on nano and materials science- aip conf. proc. 

     

    shalina sheik muhamad, jaharah a. ghani, che hassan che haron.  (2021).  pemesinan keluli dalam keadaan mampan.  - 132. 

     

    che hassan che haron.  (2016).  pemesinan lestari aloi titanium untuk kegunaan aeroangkasa.  - 108. 

     

    jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hasan che haron, and rizauddin ramlia.  (2010).  iaeng transactions on engineering technologies volume 5.  - 249-260. 

     

    mohd nor azmi mohd rodzi , jaharah a.g. , eghawail a.m. , kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  iaeng transaction in engineering technologies vol 5.  - 260-265. 

     

    jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hasan che haron, and rizauddin ramlia.  (2010).  iaeng transactions on engineering technologies volume 5.  - 249-260. 

     

    mohd nor azmi mohd rodzi , jaharah a.g. , eghawail a.m. , kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  iaeng transaction in engineering technologies vol 5.  - 260-265. 

     

    shalina sheik muhamad, jaharah a. ghani, che hassan che haron.  (2021).  pemesinan keluli dalam keadaan mampan.  - 132. 

     

    che hassan che haron.  (2016).  pemesinan lestari aloi titanium untuk kegunaan aeroangkasa.  - 108. 

     

    rahmah m, m.noor embi, che hassan ch,ghazally l, ismanizan, nasir raki,ramli a, normah, heesyamuddin, hashrifa, t.nor kirana,fadzly, siti noraida, m.shahril,norasmah [and four others].  (2013).  research universities : scaffolding malaysia`s economic transformation programme.  - 124. 

     

    rahmah mohamed;chehassan cheharon;ismanizan ismail;ramli abdullah;normah dolah;mohd hesyamudin;mohdhashrifa;tengku norkirana;mohd nasir;sitinoraida;mohdshahril;norasmah;syafura;dahliya;azrizal;ashikin.  (2013).  governans dan polisi pusat pengurusan penyelidikan dan instrumentasi.  - 236. 

     

    jaharah bt. a ghani;che hassan bin che haron;manal binti ismail;rizauddin bin ramli;wan fathul hakim bin w. zamri.  (2022).  development of a nano-scale mql system to enhance the performance of cutting fluids in machining process.  -

     

    norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  -

     

    che hassan bin che haron;jaharah bt. a ghani;mohd. zaki bin nuawi;wan fathul hakim bin w. zamri.  (2021).  cryogenic machining of inconnel alloys using carbide cutting tool for sustainable manufacturing process.  -

     

    abu bakar bin sulong;che hassan bin che haron;norhamidi bin muhamad;nabilah afiqah binti mohd radzuan.  (2021).  kesan penambahan bahan nano terhadap ketahanan mekanikal dan fizikal kenaf polimer komposit bagi aplikasi automotif.  -

     

    jaharah bt. a ghani;che hassan bin che haron;siti masrinda bt. tasirin;wan mohd faizal bin wan mahmood.  (2020).  performance of bio-metal cutting fluid from treated recycled cooking oil in machining ferrous and non ferrous metal for sustainable manufacturing.  -