profesor kehormat
jabatan kejuruteraan mekanikal & pembuatan
muchtar@ukm.edu.my
Biografi/ Biography :
Dr. Andanastuti Muchtar is a Professor of Advanced Ceramics at the Department of Mechanical and Manufacturing Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM). She obtained her B.Eng. (Hons) Mech. Eng. from the University of Leeds, UK in 1992 and joined UKM immediately after. She then pursued her PhD at the National University of Singapore and graduated in 1999, upon which she returned to UKM and built her academic career. She was promoted to Associate Professorship in 2003 and full professorship in 2010. From October 2007 to September 2008, she spent one year on an academic exchange to the University of Duisburg-Essen (UDE) funded by the German Academic Exchange Services (DAAD). Subsequently, she was appointed as Head of the UKM International Office at UDE in Duisburg, Germany from 2010 to 2013. She was later appointed as the Director of the UKM Graduate Centre from 2013 until 2019. She is currently active in research and heads the Solid Oxide Fuel Cell Research Group at UKM and is an associate research fellow at the Fuel Cell Institute, UKM. Her current research interests also include bio ceramics and dental ceramics as she collaborates with her counterparts from the Faculty of Dentistry, UKM.
ole ronie, wan aizon w. ghopa, nurul akidah baharuddin, mahendra rao somalu, noor shieela kalib, andanastuti muchtar. (2025). evaluation and computational modelling of planar electrolyte-supported sofc. - jurnal kejuruteraan. 1563 - 1570.
m.s. amril, n.h. jamadon, m.j. ghazali, h.z. yew, m.i.m. ahmad, a. muchtar. (2025). sintering temperature effects on mechanical properties and antagonist wear of 3 mol% yttria stabilized zirconia. - tribology international. 1 - 9.
isyraf aznam; andanastuti muchtar; mahendra rao somalu; nurul akidah baharuddin. (2025). hydrogen production via methane pyrolysis using ni–cu– mn spinel catalysts for hydrocarbon-fuelled solid oxide fuel cell applications. - aip conference proceedings. 20047 - 20047.
azreen junaida abd aziz; wan nor anasuhah wan yusoff; nurul akidah baharuddin; mahendra rao somalu; andanastuti muchtar. (2025). influence of sintering temperature on the microstructural and electrochemical behaviours of srfe0.9ti0.1o3-d–ce0.8sm0.2o1.9 composite cathode for solid-oxide fuel cells. - aip conference proceedings. 20027 - 20027.
wan nor anasuhah wan yusoff; nurul akidah baharuddin; mahendra rao somalu; nigel peter brandon; andanastuti muchtar; muhammed ali shaikh abdul kader abdul hameed. (2025). high conductivity lithiated electrode for symmetrical solid oxide fuel cell. - aip conference proceedings. 20041 - 20041.
m.s. amril, n.h. jamadon, m.j. ghazali, h.z. yew, m.i.m. ahmad, a. muchtar. (2025). sintering temperature effects on mechanical properties and antagonist wear of 3 mol% yttria stabilized zirconia. - tribology international. 1 - 9.
wen sheng teng, hsu zenn yew, nashrah hani jamadon, jasmina qamaruz zaman, meor iqram meor ahmad, andanastuti muchtar. (2024). effect of porcelain veneering technique in bilayered zirconia on bond strength and residual stress distribution. - journal of the mechanical behavior of biomedical materials. 1-10.
isyraf aznam, andanastuti muchtar, mahendra r. somalu, nurul akidah baharuddin, nur adiera hanna rosli. (2023). advanced materials for heterogeneous catalysis: a comprehensive review of spinel materials for direct internal reforming of methane in solid oxide fuel cell. - chemical engineering journal. 1-19.
nor anisa arifin, abdullah a. afifi, ayesha samreen, r.s.r.m. hafriz, andanastuti muchtar. (2023). characteristic and challenges of scandia stabilized zirconia as solid oxide fuel cell material - in depth review. - solid state ionics. 1-23.
constance l. gnanasagaran, karthikeyan ramachandran, nashrah hani jamadon, vishaal harikrishna kumar, andanastuti muchtar, ashwath pazhani, beenish ayaz. (2023). microstructural and mechanical behaviours of y-tzp prepared via slip-casting and fused deposition modelling (fdm). - heliyon. 1-10.
azreen junaida abd aziz, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, sahrim haji ahmad. (2023). kesan suhu pensinteran terhadap mikrostruktur dan sifat mekanikal perovskit seramik srfe0.9ti0.1o3-d-sdc. - sains malaysiana. 1303-1314.
joelle c. w. mah, isyraf aznam, andanastuti muchtar, mahendra rao somalu, jarot raharjo. (2023). synthesis of (cu,mn,co)3o4 spinel: effects of citrate-to-nitrate ratio on its homogeneity and electrical properties. - energies. 1-11.
ahmad fuzamy mohd abd fatah, ahmad zaki rosli, ahmad azmin mohamad, andanastuti muchtar, muhammed ali s.a., noorashrina a. hamid. (2022). electrochemical evaluation of nickel oxide addition toward lanthanum strontium cobalt ferrite cathode for intermediate temperature solid oxide fuel cell (it-sofcs). - energies. 1-15.
ahmad fuzamy mohd abd fatah, ahmad zaki rosli, ahmad azmin mohamad, andanastuti muchtar, muhammed ali s.a., noorashrina a. hamid. (2022). electrochemical evaluation of nickel oxide addition toward lanthanum strontium cobalt ferrite cathode for intermediate temperature solid oxide fuel cell itsofcs. - energies. 1-15.
sharmini arumugam, hsu zenn yew, safura anita baharin, jasmina qamaruz zaman, andanastuti muchtar, shalini kanagasingam. (2021). micro-computed tomography evaluation of dentinal microcracks following canal preparation with thermomechanically heat-treated engine-driven file. - australian endodontic journal. 520-530.
m.s. amril, n.h. jamadon, m.j. ghazali, h.z. yew, m.i.m. ahmad, a. muchtar. (2025). sintering temperature effects on mechanical properties and antagonist wear of 3 mol% yttria stabilized zirconia. - tribology international. 1 - 9.
ole ronie, wan aizon w. ghopa, nurul akidah baharuddin, mahendra rao somalu, noor shieela kalib, andanastuti muchtar. (2025). evaluation and computational modelling of planar electrolyte-supported sofc. - jurnal kejuruteraan. 1563 - 1570.
wen sheng teng, hsu zenn yew, nashrah hani jamadon, jasmina qamaruz zaman, meor iqram meor ahmad, andanastuti muchtar. (2024). effect of porcelain veneering technique in bilayered zirconia on bond strength and residual stress distribution. - journal of the mechanical behavior of biomedical materials. 1-10.
teng ws, yew hz, jamadon nh, qamaruz zaman j, meor ahmad mi, muchtar a. (2024). unravelling the role of residual stress distribution in the performance of bilayered zirconia restorations - a narrative review. - journal of health and translational medicine (jummec). 178-186.
nur nadhihah mohd tahir, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, abdullah abd samat, lai jian wei. (2024). comparative analysis of lico0.6sr0.4o2 cathode electrochemical performance in oxide- and proton-conducting intermediate-temperature solid fuel oxide cells. - journal of advanced research in micro and nano engineering. 22-30.
isyraf aznam; andanastuti muchtar; mahendra rao somalu; nurul akidah baharuddin. (2025). hydrogen production via methane pyrolysis using ni–cu– mn spinel catalysts for hydrocarbon-fuelled solid oxide fuel cell applications. - aip conference proceedings. 20047 - 20047.
azreen junaida abd aziz; wan nor anasuhah wan yusoff; nurul akidah baharuddin; mahendra rao somalu; andanastuti muchtar. (2025). influence of sintering temperature on the microstructural and electrochemical behaviours of srfe0.9ti0.1o3-d–ce0.8sm0.2o1.9 composite cathode for solid-oxide fuel cells. - aip conference proceedings. 20027 - 20027.
wan nor anasuhah wan yusoff; nurul akidah baharuddin; mahendra rao somalu; nigel peter brandon; andanastuti muchtar; muhammed ali shaikh abdul kader abdul hameed. (2025). high conductivity lithiated electrode for symmetrical solid oxide fuel cell. - aip conference proceedings. 20041 - 20041.
n shieela kalib, a muchtar, v zhen yuan, m rao somalu and a kamal ariffin mohd ihsan. (2022). thermal investigation of solid oxide fuel cell ni-ysz anode supported with cooling system: a fem approach. - iop conference series: materials science and engineering. 1-6.
b kiwan, n s kalib and a muchtar. (2022). decomposition and decoupling analyses of co2 emissions and economic growth: a comparative study between malaysia and vietnam. - iop conference series: materials science and engineering. 1-6.
noraiham mohamad, jeefferie abd razak, hairul effendy ab maulod, andanastuti muchtar, mariyam jameelah ghazali, dahlan hj. mohd, che husna azhari. (2022). alumina filled rubber composites: application, mechanical properties, morphological characteristics and processability. - . 157-192.
nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar and che h. azhari. (2021). titanate couplers for dental composites construction. - . 128-148.
nidal w. elshereksi, mariyam j. ghazali, andanastuti muchtar, che h. azhari. (2021). titanium-based additives for dental polymer composites. - . 75-95.
muhammed ali s.a, andanastuti muchtar, mahendra rao somalu. (2017). comparison between combined combustion and rotary evaporation for la0.6sr0.4co0.2fe0.8 preparation. - . 52-71.
noor faeizah amat, andanastuti muchtar, norziha yahaya, mariyam jameelah ghazali. (2017). colloidal processing of zirconia nanopowder for dental crown applications. - . 86-108.
nashrah hani binti jamadon;andanastuti muchtar;zaliha binti wahid;abdul hadi bin azman. (2023). pembangunan modul pembelajaran digital secara interaktif dengan penggunaan teknologi realiti terimbuh (ar) bagi disiplin kejuruteraan mekanikal dan pembuatan. - . .
azreen junaida abd aziz, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar, sahrim haji ahmad. (2023). kesan suhu pensinteran terhadap mikrostruktur dan sifat mekanikal perovskit seramik srfe0.9ti0.1o3-d-sdc. - sains malaysiana. 1303-1314.
nurul akidah binti baharuddin;andanastuti binti muchtar;mahendra rao a/l somalu. (2023). kesan penggunaan lapisan kecerunan berasaskan katod komposit sf9t1-sdc dengan peratus komposisi berbeza ke atas prestasi elektrokimia katod sel fuel oksida pepejal bersuhu sederhana.. - . .
mahendra rao somalu, abdul azim jais, andanastuti muchtar. (2023). sel fuel oksida pepejal: prestasi janaan tenaga. - . 175.
nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar. (2022). seramik perovskit peranti penghasil tenaga masa depan. - . 177.
muhammed ali shaikh abdul kader abdul hameed;andanastuti binti muchtar;mahendra rao a/l somalu;nurul akidah binti baharuddin. (2024). highly stable la0.6sr0.4co0.2fe0.8o3-δ−sn0.1ce0.9o2−δ composite cathode for electrochemical reduction of carbon dioxide in solid oxide electrolysis cell. - . .
wan aizon w. ghopa, noor shieela kalib, mahendra rao somalu, andanastuti muchtar, mohd anas mohd sabri . (2024). characterization and simulation of planar electrolyte-supported solid oxide fuel cells. - 7th international conference on recent advances in automotive engineering & mobility research (recar 2024). .
muhammed ali s.a., yathavan subramanian, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar. (2023). progress and prospects of solid oxide electrolyzer cells for hydrogen production: opportunities and challenges. - 8th international conference on fuel cell & hydrogen technology in collaboration with the 3rd symposium on fuel cell and hydrogen technology (icfcht-sfcht 2023). 4.
muhammed ali s.a., yathavan subramanian, nurul akidah baharuddin, mahendra rao somalu, andanastuti muchtar. (2023). a review of hybrid perovskite solar cells: properties, fabrication techniques, and commercialization challenges. - world renewable energy congress 2023 (wrec 2023). 1.
teng wen sheng, yew hsu zenn, nashrah hani jamadon, jasmina qamaruzzaman, meor iqram meor ahmad, andanastuti muchtar. (2023). effects of porcelain veneering technique on shear bond strength (sbs) and residual stress distribution in bilayered zirconia restoration. - fdcu international symposium 2023. 74.