prof. dr. dzuraidah binti abd. wahab

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan

No. sambungan :  0389216118

No. rasmi:
UKM : 03 8921 5555



   Biografi/ Biography :

  • Dzuraidah Abd Wahab is a Professor at the Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia. She obtained her B.Eng (Chemical and Process Engineering) from Universiti Kebangsaan Malaysia, her Master degree (Design and Manufacture) and PhD from the Manchester Metropolitan University, United Kingdom in 1999. Prior to joining UKM in 2003, she has worked at Institut Kerja Raya Malaysia and SIRIM Berhad. Her research interests are Product Design for Sustainability, Engineering Life Cycle, AI applications in Design and Concurrent Engineering.

  • ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;zulkifli bin mohd nopiah;dzuraidah binti abd. wahab.  (2021).  reliability formulation of fatigue life assessment for powder-bed laser-fused materials.  -

     

    mohd faizal mat tahir, nor kamaliana khamis, nabilah sabri, nur zulaikha noor hasani, dzuraidah abd wahab..  (2020).  relationship between drivers dynamic pressure distribution with their anthropometric variables on car seat under paved road.  - international journal of integrated engineering.  55-61. 

     

    nuramilawahida mat ropi, hawa hishamuddin, dzuraidah abd wahab.  (2020).  analysis of the supply chain disruption risks in the malaysian automotive remanufacturing industry- a case study.  - international journal of integrated engineering.  1-11. 

     

    s s k singh, s abdullah, a h azman, n n m nasir, m r m yazid, h hishamuddin, w a w ghopa, a k ariffin, d a wahab, a h shahrir, a azhar and m s solah.  (2020).  responsibility of the bus operator in terms of safety and health: a malaysian case study.  - iop conference series: materials science and engineering.  1-8. 

     

    siti syahara mad yusof, dzuraidah abd wahab, abdul hadi azman.  (2020).  analysis of automotive component design for reparation using additive manufacturing technology.  - international journal of integrated engineering.  20-26. 

     

    mohammad soleimani amiri, rizauddin ramli, mohd faisal ibrahim, dzuraidah abd wahab and norazam aliman.  (2020).  adaptive particle swarm optimization of pid gain tuning for lower-limb human exoskeleton in virtual environment.  - mathematics.  1-16. 

     

    norhuda salim, mohd nizam ab rahman, dzuraidah abd wahab and arif azly muhamed.  (2020).  influence of social media usage on the green product innovation of manufacturing firms through environmental collaboration.  - sustainability.  1-17. 

     

    rahito, d. a. wahab and a. h. azman.  (2019).  additive manufacturing for repair and restoration in remanufacturing: an overview from object design and systems perspectives.  - processes.  1-22. 

     

    norhuda salim, mohd nizam ab rahman, dzuraidah abd wahab.  (2019).  a systematic literature review of internal capabilities for enhancing eco-innovation performance of manufacturing firms.  - journal of cleaner production. 

     

    d.a. wahab, e. blanco-davis, a.k. ariffin, j. wang.  (2018).  a review on the applicability of remanufacturing in extending the life cycle of marine or offshore components and structures.  - ocean engineering. 

     

    tengku nur azila raja mamat, muhamad zameri mat saman, safian sharif, vladimir simic, dzuraidah abd wahab.  (2018).  development of a performance evaluation tool for end-of-life vehicle management system implementation using the analytic hierarchy process.  - waste management & research. 

     

    mahmud, f., deros, b. m., wahab, d. a., ab rahman, m. n., & ramlan, r..  (2017).  critical success factors for benchmarking implementation in oil palm industry.  - international journal of advanced and applied sciences.  125-129. 

     

    tze fong go, dzuraidah abd wahab, zuhair fikri fadzil, c.h. azhari, y. umeda.  (2016).  socio-technical perspective on end-of life vehicle recovery for a sustainable environment.  - international journal of technology.  889-897. 

     

    n. m. m. rasidi, s. abdullah, d. a. wahab, r. ramli, m. r. a. mansor and r. m. yasin.  (2016).  generation of idea for product innovation in design course.  - man in india.  411-418. 

     

    mohd nizam ab. rahman, saeid jafarzadeh-ghoushchi, dzuraidah abd. wahab, majid jafarzadeh-ghoushji.  (2014).  artificial neural network modeling studies to predict the amount of carried weight by iran khodro transportation system.  - life science journal.  146-154. 

     

    s s k singh, s abdullah, a h azman, n n m nasir, m r m yazid, h hishamuddin, w a w ghopa, a k ariffin, d a wahab, a h shahrir, a azhar and m s solah.  (2020).  responsibility of the bus operator in terms of safety and health: a malaysian case study.  - iop conference series: materials science and engineering.  1-8. 

     

    a h azman, s abdullah, s s k singh, m r m yazid, w a w ghopa, h hisamuddin, a h shahrir, a k ariffin, d a wahab, a azhar and m s solah.  (2020).  assessing the safety of express bus from passengers' perspective.  - iop conference series: materials science and engineering.  1-8. 

     

    rahito, dzuraidah abd wahab and abdul hadi azman.  (2019).  restoration of remanufacturable components using additive manufacturing.  - 5th international conference on sustainable design and manufacturing, sdm 2018.  193-198. 

     

    e.a. azrulhisham, y.m. asri, a.w. dzuraidah. a. h. hairul fahmi.  (2012).  accelerated test model in fatigue life reliability evaluation of stub axle.  - advances in safety, reliability and risk management - proceedings of the european safety and reliability conference, esrel 2011; troyes. 

     

    jaafar sahari, norhamidi muhamad, dzuraidah abd wahab, juridah johari.  (2012).  assessment of engineering common sense among newly enrolled students of mechanical and manufacturing engineering programs.  - procedia social and behavioral sciences. 

     

    s s k singh, s abdullah, a h azman, n n m nasir, m r m yazid, h hishamuddin, w a w ghopa, a k ariffin, d a wahab, a h shahrir, a azhar and m s solah.  (2020).  responsibility of the bus operator in terms of safety and health: a malaysian case study.  - iop conference series: materials science and engineering.  1-8. 

     

    a h azman, s abdullah, s s k singh, m r m yazid, w a w ghopa, h hisamuddin, a h shahrir, a k ariffin, d a wahab, a azhar and m s solah.  (2020).  assessing the safety of express bus from passengers' perspective.  - iop conference series: materials science and engineering.  1-8. 

     

    rahito, dzuraidah abd wahab and abdul hadi azman.  (2019).  restoration of remanufacturable components using additive manufacturing.  - 5th international conference on sustainable design and manufacturing, sdm 2018.  193-198. 

     

    e.a. azrulhisham, y.m. asri, a.w. dzuraidah. a. h. hairul fahmi.  (2012).  accelerated test model in fatigue life reliability evaluation of stub axle.  - advances in safety, reliability and risk management - proceedings of the european safety and reliability conference, esrel 2011; troyes. 

     

    jaafar sahari, norhamidi muhamad, dzuraidah abd wahab, juridah johari.  (2012).  assessment of engineering common sense among newly enrolled students of mechanical and manufacturing engineering programs.  - procedia social and behavioral sciences. 

     

    hawa hishamuddin, mohd azizi abd aziz, noraida azura md darom, mohd nizam ab rahman, dzuraidah abd wahab.  (2020).  dynamics in logistics.  - proceedings of the 7th international conference ldic 2020, bremen, germany.  10. 

     

    nurhasyimah abd aziz, dzuraidah abd wahab & rizauddin ramli.  (2017).  sustainable design and manufacturing 2017.  - 11. 

     

    ja`afar sahari, syazrin aklili, dzuraidah abd wahab, ruhizan mohd yasin, shahrum abdullah, ahmad kamal ariffin mohd ihsan, shahrir abdullah, mohd zaidi omar, norhamidi muhamad.  (2012).  mercu kesarjanaan pengajaran dan pembelajaran, penyelidikan tindakan di institusi pengajian tinggi.  - 175-189. 

     

    prof. ir. dr. shahrir abdullah.  (2012).  garis panduan penyediaan dokumen program pengajian universiti kebangsaan malaysia.  - 110. 

     

    e.a. azrulhisham, y.m. asri, a.w. dzuraidah, a.h. hairul fahmi.  (2012).  advances in safety, reliability and risk management.  - 227-228. 

     

    hawa hishamuddin, mohd azizi abd aziz, noraida azura md darom, mohd nizam ab rahman, dzuraidah abd wahab.  (2020).  dynamics in logistics.  - proceedings of the 7th international conference ldic 2020, bremen, germany.  10. 

     

    nurhasyimah abd aziz, dzuraidah abd wahab & rizauddin ramli.  (2017).  sustainable design and manufacturing 2017.  - 11. 

     

    dzuraidah abdul wahab & che husna azhari.  (2015).  ensiklopedia kejuruteraan alam melayu.  - Bab 5: 49-54. 

     

    e.a. azrulhisham, y.m. asri, a.w. dzuraidah, a.h. hairul fahmi.  (2012).  advances in safety, reliability and risk management.  - 227-228. 

     

    ja`afar sahari, syazrin aklili, dzuraidah abd wahab, ruhizan mohd yasin, shahrum abdullah, ahmad kamal ariffin mohd ihsan, shahrir abdullah, mohd zaidi omar, norhamidi muhamad.  (2012).  mercu kesarjanaan pengajaran dan pembelajaran, penyelidikan tindakan di institusi pengajian tinggi.  - 175-189. 

     

    prof. ir. dr. shahrir abdullah.  (2012).  garis panduan penyediaan dokumen program pengajian universiti kebangsaan malaysia.  - 110. 

     

    shahrir abdullah et al..  (2011).  jaminan kualiti proses pendidikan: perspektif ukm sebagai institusi swaakreditasi dan universiti penyelidikan.  - 83. 

     

    mariyam jameelah ghazali, baba md deros, badariah bais, dzuraidah abd wahab, fatihah suja`, huda abdullah, jamaliah md jahim.  (2008).  proceedings of engineering postgraduate conference 2008.  - 74. 

     

    ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;zulkifli bin mohd nopiah;dzuraidah binti abd. wahab.  (2021).  reliability formulation of fatigue life assessment for powder-bed laser-fused materials.  -

     

    hawa binti hishamuddin;dzuraidah binti abd. wahab;mohd nizam bin ab rahman.  (2020).  analysis of supply disruption effects on greenhouse gas emission levels from transportation activities in supply chain systems.  -

     

    hawa hishamuddin dzuraidah abd wahab mohd nizam ab rahman ruhul amin sarker.  (2020).  analysis of supply disruption effects on greenhouse gas emission levels from transportation activities in supply chain systems.  - 1-7. 

     

    abdul hadi azman, salvinder singh karam singh, shahrum abdullah, wan aizon w ghopa, hawa hishamuddin, muhamad razuhanafi mat yazid, dzuraidah abd wahab, ahmad kamal ariffin mohd ihsan.  (2020).  safety index mapping system for express bus, international science technology and engineering expo 2020.  - safety index mapping system for express bus, international science technology and engineering expo 2020.  1. 

     

    dzuraidah abd wahab.  (2020).  urus kenderaan terbiar lestarikan alam sekitar.  - berita harian.  12--.