dr. wan fathul hakim bin w. zamri

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan

 wfathul.hakim@ukm.edu.my

No. sambungan :  0389216517

No. rasmi:
UKM : 03 8921 5555



   Biografi/ Biography :

  • Wan Fathul Hakim W. Zamri received his Ph.D from the University of Wollongong, Australia in 2013. He is a senior lecturer at the Department of Mechanical & Manufacturing Engineering, Faculty of Engineering and Built Environment, UKM. His research interest is mainly in Computational Tribology, particularly in the area of hot roll wear. His teaching and research areas include tribology, material processing, finite element & structural integrity.

  • leong chee yau, wan fathul hakim w. zamri, muhammad faiz md din, ahmad kamal ariffin, intan fadhlina mohamed.  (2021).  influences of coefficient of frictions on the contact behavior for ball bearings.  - solid state technology.  4387-4394. 

     

    l. joey, w f h zamri, m f m din, a shamsudeen, and i. f. mohamed.  (2021).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi layer hierarchy coatings on automotive bearings.  - international conference on manufacturing technology-iconmet 2021.  1-8. 

     

    n. h. pakharuddin1*, m. n. fazly1, s. h. ahmad sukari1, k. tho1, w.f.h. zamri1,2,*.  (2021).  4th int conference on science and technology applications in climate change (abstract book); towards 4ir technologies in water treatment: a comparative study of malaysia, canada, japan,and australia.  - 4th international conference on science and technology applications in climate change (staclim 2021).  28. 

     

    l. joey1, *w f h zamri1,2, m f m din3, a shamsudeen1 and i. f. mohamed1.  (2021).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi-layer hierarchy coatings on automotive bearings.  - iconmet 2021 1st international conference on manufacturing engineering technology 2021.  1-18. 

     

    che hassan bin che haron;jaharah bt. a ghani;mohd. zaki bin nuawi;wan fathul hakim bin w. zamri.  (2021).  cryogenic machining of inconnel alloys using carbide cutting tool for sustainable manufacturing process.  -

     

    jaharah a. ghani, faarih farhan mohd nasir, haniff abdul rahman, wan fathul hakim wan zamri, mohd shahir kasim, shalina sheikh muhamad.  (2021).  computational fluid dynamic analysis on tribological performance under hydrodynamic lubrication of dimple textured surface produced using turning process.  - wear.  1-8. 

     

    mariyam j. ghazali, xu ren, armin rajabi, wan fathul hakim w. zamr, nadia mohd mustafah and jing ni.  (2021).  finite element analysis of cushioned diabetic footwear using ethylene vinyl acetate polymer.  - polymer.  1-12. 

     

    ahmad afiq pauzi, mariyam jameelah ghazali, wan fathul hakim w. zamri and armin rajabi.  (2020).  wear characteristics of superalloy and hardface coatings in gas turbine applications - a review.  - metals.  1-14. 

     

    g.y.deng, a.k.tieu, l.h.su, h.t.zhu, q.zhu, w.f.h.zamri, c.kong.  (2019).  characterizing deformation behaviour of an oxidized high speed steel: effects of nanoindentation depth, friction and oxide scale porosity.  - international journal of mechanical sciences.  267-285. 

     

    najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, wan fathul hakim zamri, mohd zaidi omar and zainuddin sajuri.  (2018).  experimental and numerical investigation on the layering configuration effect to the laminated aluminium/steel panel subjected to high speed impact test.  - metals. 

     

    nur sabrina suhaimi, muhamad faiz md din, abdul rashid abdul rahman , mardhiah hayati abdul hamid , nur aqilah mohamad amin ,wan fathul hakim wan zamri, and jianli wang.  (2020).  optimum electrical and dielectric performance of multi-walled carbon nanotubes doped disposed transformer oil.  - energies.  1-19. 

     

    ahmad afiq pauzi, mariyam jameelah ghazali, salmi mohd yunus, wan fathul hakim w zamri, che husna azhari, shuib husin.  (2019).  wear characteristics of gas turbine fuel nozzle-contacting surface at different contact temperatures.  - jurnal tribologi.  108-122. 

     

    najihah abdul rahman, shahrum abdullah, mohamad faizal abdullah, mohd zaidi omar, zainuddin sajuri, wan fathul hakim zamri.  (2018).  ballistic limit of laminated panels with different joining materials subjected to steel-hardened core projectile.  - international journal of integrated engineering. 

     

    ahmad afiq pauzi, salmi mohd yunus, shuib husin, mariyam jameelah ghazali, wan fathul hakim w zamri.  (2018).  wear characteristics of a combustion liner for power generation gas turbine.  - international journal of materials and product technology. 

     

    w.n.m. jamil, m.a. aripin, z. sajuri, s. abdullah, m.z. omar, m.f. abdullah and w.f.h. zamri.  (2016).  mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles.  - international journal of automotive and mechanical engineering.  3742-3753. 

     

    muhammad faiz md din, mohamed shafie mohd jusoh, a rashidah abdul rahman, jianli wang, nurul hayati idris, mohammad ismail, wan fathul hakim w. zamri.  (2020).  study of heat treatment effect in mncoge compound on stucture and electric properties.  - 3rd international conference on advanced materials characterization techniques, amct 2019, kangar, malaysia.  86-91. 

     

    m. f. md din, j. l. wang, a. r. abdul rahman, y. n. a. norizan, n. s. suhaimi, n. h. idris, m. ismail, w. f. h. wan zamri, f. abdul aziz.  (2019).  structure analysis using xrd refinement for replacement of copper (cu) with manganese (mn) in ndmn2si2 compound.  - aip conference proceedings.  20061-20066. 

     

    m. f. md din, j. l. wang, y. n. a. norizan, p. shamba, f. r. hashim, n. h. idris, and w. f. h. wan zamri.  (2018).  systematically study on the magnetism and critical behaviour of layered ndmn1.4cu0.6si2.  - proceedings of the 3rd international conference on applied science and technology (icast 18). 

     

    muhammad faiz md din, mohamed shafie mohd jusoh, a rashidah abdul rahman, jianli wang, nurul hayati idris, mohammad ismail, wan fathul hakim w. zamri.  (2020).  study of heat treatment effect in mncoge compound on stucture and electric properties.  - 3rd international conference on advanced materials characterization techniques, amct 2019, kangar, malaysia.  86-91. 

     

    m. f. md din, j. l. wang, a. r. abdul rahman, y. n. a. norizan, n. s. suhaimi, n. h. idris, m. ismail, w. f. h. wan zamri, f. abdul aziz.  (2019).  structure analysis using xrd refinement for replacement of copper (cu) with manganese (mn) in ndmn2si2 compound.  - aip conference proceedings.  20061-20066. 

     

    m. f. md din, j. l. wang, y. n. a. norizan, p. shamba, f. r. hashim, n. h. idris, and w. f. h. wan zamri.  (2018).  systematically study on the magnetism and critical behaviour of layered ndmn1.4cu0.6si2.  - proceedings of the 3rd international conference on applied science and technology (icast 18). 

     

    mohamamad rasidi rasani, wan fathul hakim wan zambri, meor iqram meor ahmad, ahmad kamal ariffin mohd ihsan.  (2020).  mekanik komputeran: eksperimen model dan simulasi.  - 183. 

     

    wan fathul hakim w. zamri, intan fadhlina mohamed, chan teng neng, muhamad isyraf aznam & muhamad faiz md. din.  (2020).  mekanik komputeran: eksperimen model dan simulasi.  - 19. 

     

    mohammad rasidi rasani, wan fathul hakim w. zamri, meor iqram meor ahmad, ahmad kamal ariffin mohd ihsan.  (2020).  mekanik komputeran:eksperimen model dan simulasi.  - 185. 

     

    wan fathul hakim w. zamri, intan fadhlina mohamed, chan teng neng, muhamad isyraf aznam & muhamad faiz md. din.  (2020).  mekanik komputeran: eksperimen model dan simulasi.  - 19. 

     

    w. f. h. w. zamri, b. kosasih, k. tieu, m.f. md. din, i.f. mohamed.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 22. 

     

    mohammad rasidi rasani, wan fathul hakim w. zamri, meor iqram meor ahmad, ahmad kamal ariffin mohd ihsan.  (2020).  mekanik komputeran:eksperimen model dan simulasi.  - 185. 

     

    mohamamad rasidi rasani, wan fathul hakim wan zambri, meor iqram meor ahmad, ahmad kamal ariffin mohd ihsan.  (2020).  mekanik komputeran: eksperimen model dan simulasi.  - 183. 

     

    nur akmal abdullah goh, mohd. marzuki mustapha, abd. wahab mohammad, othman jaafar, siti fatin mohd razali, azrul a. mutalib, wan aizon wan ghopa, zambri harun [and (seven) others].  (2016).  laporan akhir rintis program inisiatif libat sama (pilbs).  - 87. 

     

    m.j. ghazali, a. muchtar, t.i. mohamad, w.a.w. ghopa, w.f.h.w. zamri, m.f.m. tahir, m.a.m. sabri, h. hishamuddin, z. wahid, n.k. khamis.  (2009).  annual report 08 department of mechanical & materials engineering.  - 75. 

     

    wan fathul hakim w zamri, zulkhairi zainol abidin, zambri harun.  (2021).  cabaran pembelajaran ketika pandemik: simptom stres di kalangan pelajar program kejuruteraan mekanikal ukm.  - kongres dan pertandingan inovasi dalam pengajaran dan pembelajaran (knovasi) 2021 evolusi ke arah pembelajaran tanpa sempadan: langkah kehadapan.  1-16. 

     

    l. joey, w f h zamri, m f m din, a shamsudeen, and i. f. mohamed.  (2021).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi layer hierarchy coatings on automotive bearings.  - international conference on manufacturing technology-iconmet 2021.  1-8. 

     

    n. h. pakharuddin1*, m. n. fazly1, s. h. ahmad sukari1, k. tho1, w.f.h. zamri1,2,*.  (2021).  4th int conference on science and technology applications in climate change (abstract book); towards 4ir technologies in water treatment: a comparative study of malaysia, canada, japan,and australia.  - 4th international conference on science and technology applications in climate change (staclim 2021).  28. 

     

    che hassan bin che haron;jaharah bt. a ghani;mohd. zaki bin nuawi;wan fathul hakim bin w. zamri.  (2021).  cryogenic machining of inconnel alloys using carbide cutting tool for sustainable manufacturing process.  -

     

    l. joey1, *w f h zamri1,2, m f m din3, a shamsudeen1 and i. f. mohamed1.  (2021).  inverse and regression methods in determining the mechanical properties of tin and tialn thin film multi-layer hierarchy coatings on automotive bearings.  - iconmet 2021 1st international conference on manufacturing engineering technology 2021.  1-18.