prof. ir. dr. shahrum bin abdullah

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan



   Kluster Kepakaran/ Cluster of Expertise :
  • Teknologi Digital dan Terkehadapan,



  •    Biografi/ Biography :

  • Ir. Dr. Shahrum Abdullah ialah profesor di Jabatan Kejuruteraan Mekanikal dan Pembuatan, UKM dan menerima ijazah Doktor Falsafah (PhD) di The University of Sheffield UK pada tahun 2005. Bidang penyelidikan nya ialah penilaian hayat lesu, integriti struktur mekanikal, kebolehtahanan, analisis isyarat dan reka bentuk kejuruteraan. Beliau telah menerbitkan lebih daripada 400 penulisan yang diterbitkan dalam jurnal (WoS/SCOPUS) dan juga prosiding persidangan. Beliau juga terlibat dengan organisasi dalam dan luar negara sebagai penilai kertas proposal, pengerusi persidangan antarabangsa, pewasit makalah jurnal, ahli jawatankuasa persidangan dan sebagainya. Beliau juga sering dijemput sebagai pembentang jemputan dan ucaptama dalam beberapa persidangan tempatan dan antarabangsa. Sumbangan kepakaran Prof Shahrum kepada industri berkaitan di Malaysia adalah penting dalam memperkukuhkan bidang penyelidikan beliau, juga menghubungan elemen akademia dan industri.

  • salvinder singh karam singh, shahrum abdullah.  (2025).  graduan perlu praktikal sesuai keperluan industri.  - utusan malaysia. 

     

    m.a. adam, s.s.k. singh, s. abdullah, m.a.m. jedi.  (2025).  bayesian approach in fatigue reliability characterization for stochastic-induced road load conditions.  - results in engineering.  1 - 21. 

     

    noorhelyna razali, noor farah wahida abdul rashid, nisa balqis, mansor, khew ho yuan, izamarlina asshaari, shahrum abdullah & firdaus mohamad hamzah.  (2025).  an enhanced symmetrized implicit trapezoidal rule for dampening the oscillatory behaviour of numerical solutions.  - jurnal kejuruteraan.  2829 - 2840. 

     

    muhammad ashraf adam, salvinder singh karam singh, shahrum abdullah & muhamad alias md. jedi .  (2025).  strain-based fatigue reliability assessment of an automobile’s lower arm for various road load conditions due to limited experimental data.  - jurnal kejuruteraan.  79 - 96. 

     

    a. jeyaraju, s. s. k. singh, s. abdullah, z. wahid.  (2025).  reliability index-based fatigue assessment of alsi10mg using naïve bayes classification .  - proceedings of damage mechanics of materials and structures.  15 - 16. 

     

    jicai wang, shahrum abdullah, chen gao, azli arifin, salvinder singh karam singh.  (2025).  freqmgcn-net: an iot-integrated multi-parallel graph convolutional network with frequency attention for motor bearing fault diagnosis.  - alexandria engineering journal .  175 - 185. 

     

    m.a. khan, s.s.k. singh, s. abdullah, a. arifin, m. bashir.  (2025).  fatigue life characterisation of api x65 steel pipeline for internal vibrational loads under sea water condition.  - applied ocean research.  1 - 15. 

     

    m. m. mubasyir, s. abdullah, s. s. k. singh, m. k. faidzi, c. h. chin & z. wahid .  (2025).  characterising fatigue damage stages in aluminium 6061 using acoustic emission and wavelet energy analysis.  - arabian journal for science and engineering.  1 - 21. 

     

    s.s.k. singh, l. abdullah, s. abdullah, a.h. azman, a.k. ariffin.  (2024).  strain-based running reliability characterisation in time-domain for risk monitoring under various load conditions.  - eksploatacja i niezawodnosc - maintenance and reliability.  1-22. 

     

    c.h. chin, s. abdullah, a.k. ariffin, s.s.k. singh, a. arifin.  (2024).  a review of the wavelet transform for durability and structural health monitoring in automotive applications.  - alexandria engineering journal.  204-216. 

     

    l. abdullah, s. s. k. singh, a. k. ariffin, s. abdullah.  (2024).  probabilistic characterization for durability assessment under various road strain loads.  - journal of mechanical science and technology.  3441 - 3453. 

     

    n.m. hamzi, s.s.k. singh, s. abdullah, m.r.m. rasani, l. abdullah.  (2023).  characterising multiaxial fatigue random strain time domain in assessing the durability of a suspension coil spring.  - experimental techniques.  655-667. 

     

    c. h. chin, s. abdullah, s. s. k. singh, a. k. ariffin & d. schramm.  (2022).  probabilistic-based fatigue reliability assessment of carbon steel coil spring from random strain loading excitation.  - journal of mechanical science and technology.  109-118. 

     

    c. h. chin, s. abdullah, a. g. yin & a. k. ariffin.  (2022).  vibration fatigue analysis through frequency response function of variable amplitude loading.  - journal of mechanical science and technology.  33-43. 

     

    y. s. kong, s. abdullah, s. s. k. singh.  (2021).  clustering of decomposed strain signal energy for durability classification.  - journal of mechanical science and technology.  1-12. 

     

    m. m. mubasyir, s. abdullah, s. s. k. singh, m. k. faidzi, c. h. chin & z. wahid .  (2025).  characterising fatigue damage stages in aluminium 6061 using acoustic emission and wavelet energy analysis.  - arabian journal for science and engineering.  1 - 21. 

     

    nisa balqis masnoor, noor farah wahida, noorhelyna razali, shahrum abdullah & habibis saleh.  (2025).  a simplified conservative runge–kutta method for numerical prediction of fatigue crack growth.  - jurnal kejuruteraan.  2841 - 2850. 

     

    jicai wang, shahrum abdullah, chen gao, azli arifin, salvinder singh karam singh.  (2025).  freqmgcn-net: an iot-integrated multi-parallel graph convolutional network with frequency attention for motor bearing fault diagnosis.  - alexandria engineering journal .  175 - 185. 

     

    m.a. khan, s.s.k. singh, s. abdullah, a. arifin, m. bashir.  (2025).  fatigue life characterisation of api x65 steel pipeline for internal vibrational loads under sea water condition.  - applied ocean research.  1 - 15. 

     

    noorhelyna razali, noor farah wahida abdul rashid, nisa balqis, mansor, khew ho yuan, izamarlina asshaari, shahrum abdullah & firdaus mohamad hamzah.  (2025).  an enhanced symmetrized implicit trapezoidal rule for dampening the oscillatory behaviour of numerical solutions.  - jurnal kejuruteraan.  2829 - 2840. 

     

    azli arifin, shahrum abdullah, ahmad kamal ariffin, nordin jamaludin, and salvinder singh karam singh.  (2022).  stress ratio effect on fatigue crack growth rate based on magnetic flux leakage parameters.  - 20th international colloquium on mechanical fatigue of metals.  275-281. 

     

    m. k. faidzi, s. abdullah, m. f. abdullah, s. s. k. singh, a. h. azman, josé a. f. o. correia , and d. hui.  (2022).  fatigue damage simulation of a metal sandwich panel under four-point bending conditions.  - the xx international colloquium on mechanical fatigue of metals.  29-38. 

     

    n. m. hazmi, s. s. k. singh, s. abdullah, l. abdullah, a. h. azman, and m. r. m. rasani.  (2022).  characterization of multiaxial strain road loads in assessing the durability of automotive coil spring.  - the xx international colloquium on mechanical fatigue of metals.  101-109. 

     

    nazirul muhaimin hamzi, salvinder singh karam singh, shahrum abdullah, lennie abdullah, mohammad rasidi mohammad rasani, abdul hadi azman, and noorsuhada md. nor.  (2022).  durability assessment of multiaxial strain loads for rural road condition in time frequency domain.  - virtual conference on mechanical fatigue (vcmf 2020).  237-246. 

     

    asliah seharing, abdul hadi azman, and shahrum abdullah.  (2022).  systematic review: overview on trends and future opportunities of additive manufactured lattice structures.  - 5th symposium on damagemechanism inmaterials and structures (sdmms 2021).  75-90. 

     

    shahrum abdullah, azli arifin, ahmad kamal ariffin mohd ihsan dan sity ainy nor mohamed.  (2020).  aplikasi mekanik komputer dalam pencirian kegagalan lesu dwipaksi pada keluli karbon.  - 26-41. 

     

    a. arifin, s. abdullah, m. iqram, n. jamaluddin.  (2018).  piping inspection using magnetic flux leakage detection.  - 92-106. 

     

    c.h. azhari, m.z. omar, s. abdullah.  (2018).  metals and semi-metallics.  - 15-18. 

     

    ruslizam daud, ahmad kamal ariffin, shahrum abdullah and al emran ismail.  (2012).  interacting cracks analysis using finite element method.  - 13(359-380). 

     

    ja`afar sahari, syazrin aklili, dzuraidah abd wahab, ruhizan mohd yasin, shahrum abdullah, ahmad kamal ariffin mohd ihsan, shahrir abdullah, mohd zaidi omar, norhamidi muhamad.  (2012).  kreativiti pelajar dalam penyelesaian masalah bagi kursus bersifat reka bentuk.  - 175-189. 

     

    salvinder singh karam singh, shahrum abdullah.  (2025).  graduan perlu praktikal sesuai keperluan industri.  - utusan malaysia. 

     

    salvinder singh karam singh, shahrum abdullah.  (2025).  sains, stem dan tvet, tiga aliran lahirkan jurutera masa hadapan .  - kosmo. 

     

    lukman mohd latifi, muhammad muaz mubasyir, shahrum abdullah, salvinder singh karam singh.  (2025).  kesan kepelbagaian frekuensi ujian lesu terhadap ketahanan plat keluli karbon aisi 1045 di bawah pembebanan spektrum.  - jurnal kejuruteraan ukm.  369 - 381. 

     

    abdul hadi bin azman;ahmad kamal ariffin bin mohd ihsan;shahrum bin abdullah;dzuraidah binti abd wahab.  (2023).  mechanical properties and configurations of conformal lattice structures for lightweight parts in the automotive industry .  -

     

    muhamad alias bin md. jedi;shahrum bin abdullah;mohd nasir bin selamat;abdul hadi bin azman;lily hanefarezan binti asbulah.  (2023).  psikologi dan persepsi pembelajaran realiti terimbuh melalui penggunaan papan cahaya.  -

     

    salvinder singh karam singh, shahrum abdullah.  (2025).  graduan perlu praktikal sesuai keperluan industri.  - utusan malaysia. 

     

    salvinder singh karam singh, shahrum abdullah.  (2025).  sains, stem dan tvet, tiga aliran lahirkan jurutera masa hadapan .  - kosmo. 

     

    abdul hadi azman, shahrum abdullah, mohd zaidi omar, wan fathul hakim wan zamri, norhamidi muhamad, mohd sabirin rahmat, nurhasyimah abdul aziz, rizauddin ramli .  (2025).  fostering innovation in product development within mechanical engineering through integrated design thinking .  - peka 2025. 

     

    shahrum ahdullah.  (2024).  engineering durability assessment: is it necessary?.  -

     

    shahrum abdullah, salvinder singh karam singh, noorsuhada md. nor.  (2024).  ensuring longevity: the role of durability assessment in modern engineering.  -

     

    MECHANICAL AND MANUFACTURING :TECHNOLOGY AND ENGINEERING
    fatigue life assessment, structural integrity, durability
    Pengalaman / Experience : 24 tahun/years(s)

    MECHANICAL AND MANUFACTURING :TECHNOLOGY AND ENGINEERING
    Fatigue Life Assesment
    Pengalaman / Experience : 25 tahun/years(s)