haniff a. rahman, jaharah a. ghani, mohammad rasidi mohammad rasani, wan mohd. faizal wan mahmood, saima yaaqob, mohd syafiq abd aziz.  (2025).  application of finite element analysis and computational fluid dynamics in machining aisi 4340 steel.  - tribology international.  1 - 15. 

norhidayah mat taib, wan mohd faizal wan mahmood, wan aizon w. ghopa, hasan köten, mohd radzi abu mansor.  (2023).  numerical study of heat transfer of hydrogen combustion in noble gases atmosphere in compression ignition engine.  - international journal of hydrogen energy.  28970-28979. 

hind azeez mohammed hussein, rozli zulkifli, wan mohd faizal bin wan mahmood, raheem k. ajeel.  (2023).  numerical investigation and parameter analysis of oblique-finned with square corrugations to improve heat transfer performance.  - alexandria engineering journal.  669-688. 

norhidayah mat taib, wan mohd faizal wan mahmood, mohd radzi abu mansor.  (2022).  combustion characteristics of hydrogen direct injection in a helium-oxygen compression ignition engine.  - energy reports.  494-511. 

jaharah a. ghani, yap pin han, wan mohd. faizal wan mahmood.  (2022).  study on liquid nano-atomization systems for minimum quantity lubrication - a review.  - the international journal of advanced manufacturing technology.  5637-5649. 

pin han yap, jaharah a. ghani, wan mohd. faizal wan mahmood, nabil jouini, iqbal u. mohammed, and muhammad rizal.  (2024).  bubble-bursting atomization for minimum quantity lubrication using the triz method and computational fluid dynamics simulations.  - journal of materials engineering and performance (jmep).  1 - 15. 

haniff a rahman, jaharah a ghani, wan mohd faizal wan mahmood, mohammad rasidi rasani and nabil jouini.  (2023).  hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using cfd.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1632-1646. 

javad zareei, abbas rohani, wan mohd faizal bin wan mahmood, shahrir abdullah.  (2020).  effect of ignition timing and hydrogen fraction in natural gas blend on performance and exhaust emissions in a di engine.  - iranian journal of science and technology, transactions of mechanical engineering.  737-747. 

haniff abdul rahman, jaharah a. ghani, wan mohd faizal wan mahmood, mohammad rasidi mohammad rasani,.  (2019).  computational fluid dynamic study on the tribological performance of dimple-textured surface fabricated using the turning process.  - industrial lubrication and tribology.  594-602. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2019).  study on soot mass fraction and size distribution in a direct injection diesel engine using particulate size mimic soot model.  - journal of thermal science and engineering applications.  . 

haniff a. rahman, jaharah a. ghani, mohammad rasidi mohammad rasani, wan mohd. faizal wan mahmood, saima yaaqob, mohd syafiq abd aziz.  (2025).  application of finite element analysis and computational fluid dynamics in machining aisi 4340 steel.  - tribology international.  1 - 15. 

pin han yap, jaharah a. ghani, wan mohd. faizal wan mahmood, nabil jouini, iqbal u. mohammed, and muhammad rizal.  (2024).  bubble-bursting atomization for minimum quantity lubrication using the triz method and computational fluid dynamics simulations.  - journal of materials engineering and performance (jmep).  1 - 15. 

haniff a rahman, jaharah a ghani, wan mohd faizal wan mahmood, mohammad rasidi rasani and nabil jouini.  (2023).  hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using cfd.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1632-1646. 

jaharah a ghani, yan guoliang, nurul nadia nor hamran, pin han yap, haniff abdul rahman, wan mohd faizal wan mahmood, rizauddin ramli, jing ni, u.mohammed iqbal.  (2023).  simulation study of the parameters that affecting the droplets size produced in a minimum quantity lubrication (mql) system using a computational fluid dynamic (cfd).  - jurnal tribologi.  116-126. 

hind azeez mohammed hussein, rozli zulkifli, wan mohd faizal bin wan mahmood, raheem k. ajeel.  (2023).  numerical investigation and parameter analysis of oblique-finned with square corrugations to improve heat transfer performance.  - alexandria engineering journal.  669-688. 

norhidayah mat taib; mohd radzi abu mansor; wan mohd faizal wan mahmood.  (2020).  combustion characteristics of direct injection hydrogen in noble gases atmosphere.  - iop conference series: earth and environmental science.  1-6. 

norhidayah mat taib; mohd radzi abu mansor; wan mohd faizal wan mahmood; nik rosli abdullah.  (2019).  simulation of optimizing diesel-ethanol-palm oil methyl ester blends combustibility in direct injection diesel engine.  - iop conference series: earth and environmental science.  1-6. 

fadzli ibrahim, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi abu mansor.  (2017).  numerical investigation on soot particles emission in compression ignition diesel engine by using particulate mimic soot model.  - matec web of conferences: the 2nd international conference on automotive innovation and green vehicle (aigev 2016).  1-11. 

norhidayah mat taib; mohd radzi abu mansor; wan mohd faizal wan mahmood; fais ahmad shah; nik rosli nik abdullah.  (2017).  investigation of diesel-ethanol blended fuel properties with palm methyl ester as co-solvent and blends enhancer.  - matec web of conferences.  1-11. 

hilmi amiruddin, wan mohd faizal wan mahmood, shahrir abdullah, mohd radzi mansor & mohd fadzli abdollah.  (2017).  experimental investigation of performance and emissions of a stratified charge cng direct injection engine with turbocharger.  - matec web of conferences volume 124 (2017) 6th international conference on transportation and traffic engineering (ictte 2017).  1-5. 

shahrir abdullah, wan mohd faizal wan mahmood, saad aljamali & azhari shamsudeen.  (2017).  compressed natural gas direct injection: comparison between homogeneous and stratified combustion.  - .  153-169. 

norhidayah mat taib mohd radzi abu mansor wan mohd faizal wan mahmood.  (2024).  gas adi: hala tuju enjin pembakaran hidrogen.  - .  . 

ahmad fazli mohamad nor, wan mohd faizal wan mahmood, muhamad alias md jedi.  (2023).  ulasan: kebolehan medan magnet merawat bahan api hidrokarbon dalam enjin pembakaran dalam.  - jurnal kejuruteraan.  105-115. 

mohd radzi bin abu mansor;wan mohd faizal bin wan mahmood;wan aizon bin w ghopa.  (2021).  kajian ciri-ciri pembakaran dan termo-fizikal campuran metil ester minyak sawit-diesel-etanol dalam enjin diesel suntikan langsung.  - .  . 

roszilah hamid, norhana arshad, badariah bais, firdaus mohd hamzah, nizaroyani saibani, shahrom md zain, et al..  (2016).  memikir semula pengajaran dan mereka bentuk semula pembelajaran.  - prosiding peka2015 k-novasi pengajaran dan pembelajaran (pendidikan kejuruteraan dan alam bina).  1-301. 

wan mohd faizal bin wan mahmood, ramizi bin mohamed, mohd tusirin bin mohd nor.  (2015).  power generation from agricultural-based biomass as a promising green technology strategy.  - .  . 

ahmad fazli mohamad nor, wan mohd faizal wan mahmood, muhamad alias md jedi.  (2024).  effects of varying magnetic treatment parameters on the combustion performance of a diesel engine run on biodiesel.  - 7th international conference on recent advances in automotive engineering & mobility research (recar 2024).  . 

muhamad alias bin md. jedi;shahrum bin abdullah;wan mohd faizal bin wan mahmood.  (2023).  thermal fatigue resistance of hybrid nanofluids for thin film applications.  - .  . 

mohd radzi bin abu mansor;shahrir bin abdullah;wan mohd faizal bin wan mahmood.  (2022).  pencirian nyalaan pengoksidaan deras jet hidrogen dalam enjin hidrogen peredaran gas adi.  - .  . 

mohd radzi bin abu mansor;wan mohd faizal bin wan mahmood;wan aizon bin w ghopa.  (2021).  kajian ciri-ciri pembakaran dan termo-fizikal campuran metil ester minyak sawit-diesel-etanol dalam enjin diesel suntikan langsung.  - .  . 

jaharah bt. a ghani;che hassan bin che haron;siti masrinda bt. tasirin;wan mohd faizal bin wan mahmood.  (2020).  performance of bio-metal cutting fluid from treated recycled cooking oil in machining ferrous and non ferrous metal for sustainable manufacturing.  - .  .