prof. ir. dr. jaharah bt. a ghani

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan



   Biografi/ Biography :

  • Jaharah A. Ghani is a Professor in the Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia. Her research interests are in the machining process; cutting tool performance and material characterisation, and focusing on its tribological effect such as machining-induced grain refinement and performance of surface texturing such as dimple using machining process . She utilising Design of Experiment especially the Taguchi Method to reduce the experimental runs and for optimisation purposes. She and team has developed a dynamometer for measuring cutting forces in machining process and this complete system is known as Neo-MoMac.

  • h.n. abu bakar, j.a. ghani, c.h. che haron, m.j. ghazali , m.s. kasim, s. al-zubaidi, n. jouini.  (2023).  wear mechanisms of solid carbide cutting tools in dry and cryogenic machining of aisi h13 steel with varying cutting-edge radius.  - wear.  1-8. 

     

    haniff a rahman, jaharah a ghani, wan mohd faizal wan mahmood, mohammad rasidi rasani and nabil jouini.  (2023).  hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using cfd.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1632-1646. 

     

    jaharah a ghani, yan guoliang, nurul nadia nor hamran, pin han yap, haniff abdul rahman, wan mohd faizal wan mahmood, rizauddin ramli, jing ni, u.mohammed iqbal.  (2023).  simulation study of the parameters that affecting the droplets size produced in a minimum quantity lubrication (mql) system using a computational fluid dynamic (cfd).  - jurnal tribologi.  116-126. 

     

    che hassan bin che haron;jaharah bt. a ghani;wan fathul hakim bin w. zamri.  (2023).  high speed machining of inconel alloys 718 under cryogenic machining of liquid nitrogen.  -

     

    muhammad rizal, jaharah a. ghani, husni usman, muhammad dirhamsyah, amir zaki mubarak.  (2023).  design and optimization of a cross-beam force transducer for a stationary dynamometer for measuring milling cutting force..  - journal of machine engineering.  41-65. 

     

    h.n. abu bakar, j.a. ghani, c.h. che haron, m.j. ghazali , m.s. kasim, s. al-zubaidi, n. jouini.  (2023).  wear mechanisms of solid carbide cutting tools in dry and cryogenic machining of aisi h13 steel with varying cutting-edge radius.  - wear.  1-8. 

     

    nabil jouini, mohd shahfizal mohd ruslan, jaharah a. ghani and che hassan che haron.  (2023).  sustainable high-speed milling of magnesium alloy az91d in dry and cryogenic conditions.  - suatainability.  1-14. 

     

    vignesh s; mohammed iqbal u; jaharah a. ghani.  (2023).  a study on the effects of hybridized metal oxide and carbonaceous nano-cutting fluids in the end milling of aa6082 aluminum alloy.  - lubricants.  1-15. 

     

    a. k. m. aminul islam, zahira yaakob, jaharah a. ghani, azza alareefy, nisreen m. abdulsalam, najla a. khateeb, nahla zidan, mahmoud a. abdelazi, ayman el sabagh*, mohamed i. sakran, awatif omran, ahmad el askary, mohamed el-sharnouby et al..  (2022).  genotype and age of industrial plant jatropha curcas l. affect physico-chemical properties of seed oil.  - frontiers in energy research.  1-9. 

     

    muhammad rizal, jaharah a. ghani and amir zaki mubarak.  (2022).  design and development of a tri-axial turning dynamometer utilizing cross-beam type force transducer for fine-turning cutting force measurement.  - sensors.  1-15. 

     

    haniff a rahman, jaharah a ghani, wan mohd faizal wan mahmood, mohammad rasidi rasani and nabil jouini.  (2023).  hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using cfd.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1632-1646. 

     

    ahsana aqilah ahmad, jaharah a. ghani, che hassan che haron.  (2022).  effect of cutting parameters on tool life during end milling of aisi 4340 under mql condition.  - industrial lubrication and tribology.  392-401. 

     

    faarih farhan mohd nasir, jaharah a. ghani, mohd shahir kasim, wan fathul hakim w. zamri.  (2022).  characteristics of dimple structure on aluminium silicon alloy fabricated using turning machine.  - industrial lubrication and tribology.  421-430. 

     

    n. a. kasim, m. z. nuawi, j. a. ghani, muhammad rizal, n. a. ngatiman & c. h. c. haron.  (2021).  enhancing clustering algorithm with initial centroids in tool wear region recognition.  - international journal of precision engineering and manufacturing.  843-863. 

     

    shalina sheikh muhamad, jaharah a. ghani, che hassan che haron, hafizal yazid.  (2020).  wear mechanism of a coated carbide tool in cryogenic machining of aisi 4340.  - industrial lubrication and tribology.  509-514. 

     

    m.s. kasim, m.s.a. hafiz, j.a. ghani, r. izamshah, m.n.a. rahman,w.n.f. mohamad, s.b. mohamed.  (2023).  the effect of pulsating lubrication method on rake face cutting tool during end milling of inconel 718.  - result in engineering.  1-5. 

     

    h.n. abu bakar, j.a. ghani, c.h. che haron, m.j. ghazali , m.s. kasim, s. al-zubaidi, n. jouini.  (2023).  wear mechanisms of solid carbide cutting tools in dry and cryogenic machining of aisi h13 steel with varying cutting-edge radius.  - wear.  1-8. 

     

    n.h.a. halim, c.h.c. haron, j.a. ghani, m.f. azhar, z. zulkifli.  (2023).  the correlation of surface roughness and tool edge condition under sustainable cryogenic machining.  - journal of mechanical engineering and sciences.  9315-9323. 

     

    haniff a rahman, jaharah a ghani, wan mohd faizal wan mahmood, mohammad rasidi rasani and nabil jouini.  (2023).  hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using cfd.  - proceedings of the institution of mechanical engineers, part j: journal of engineering tribology.  1632-1646. 

     

    vignesh s; mohammed iqbal u; jaharah a. ghani.  (2023).  a study on the effects of hybridized metal oxide and carbonaceous nano-cutting fluids in the end milling of aa6082 aluminum alloy.  - lubricants.  1-15. 

     

    nurul hayati abdul halim, che hassan che haron, jaharah abdul ghani, and muammar faiq azhar.  (2021).  optimization of surface roughness in cryogenic co2 milling of inconel 718 using rsm.  - lecture notes in mechanical engineering,.  409-422. 

     

    shalina sheik muhamad, jaharah a. ghani1, che hassan che haron , hafizal yazid.  (2020).  the effects of cutting environment on surface roughness and tool life in milling of aisi 4340.  - 3rd international conference on advances in mechanical engineering (icame 2020).  xx. 

     

    musfirah abdul hadi, jaharah a.ghani.  (2020).  enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718.  - proceedings of the 4th international manufacturing engineering conference and the 5th asia pacific conference on manufacturing systems.  512-517. 

     

    m. suhaily, c.h. che hassan, a.g. jaharah, h azmi, m.a. afifah & m.k.nor khairusshima.  (2018).  study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills.  - 6th international conference on nano and materials science- aip conf. proc. 

     

    h. azmi, c.h. c. haron, j. a. ghani, m. suhaily & a.r. yuzairi.  (2018).  machinability study on milling kenaf fiber reinforced plastic composite materials using design of experiments.  - iop conf. series: materials science and engineering. 

     

    shalina sheik muhamad, jaharah a. ghani, che hassan che haron.  (2021).  pemesinan keluli dalam keadaan mampan.  - 132. 

     

    mohd nor azmi mohd rodzi , jaharah a.g. , eghawail a.m. , kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  iaeng transaction in engineering technologies vol 5.  - 260-265. 

     

    jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hasan che haron, and rizauddin ramlia.  (2010).  iaeng transactions on engineering technologies volume 5.  - 249-260. 

     

    akm aminul islam, zahira yaakob, jaharah a ghani, nurina anuar.  (2014).  biomass and bioenergy applications.  - 31-62. 

     

    mohd nor azmi mohd rodzi , jaharah a.g. , eghawail a.m. , kamal othman, ab rahman m.n. and che hassan c.h..  (2010).  iaeng transaction in engineering technologies vol 5.  - 260-265. 

     

    jaharah a. ghani, muhammad rizal, mohd zaki nuawi, che hasan che haron, and rizauddin ramlia.  (2010).  iaeng transactions on engineering technologies volume 5.  - 249-260. 

     

    shalina sheik muhamad, jaharah a. ghani, che hassan che haron.  (2021).  pemesinan keluli dalam keadaan mampan.  - 132. 

     

    sarani zakaria, andanastuti muchtar, aisyah abdul rahman, wan hanna melini wan mohtar, babul airianah othman, norazlin hassim, abdul munir abd. murad,.  (2021).  peraturan-peraturan universiti kebangsaan malaysia (pengajian siswazah) 2021.  - 57. 

     

    che hassan bin che haron;jaharah bt. a ghani;wan fathul hakim bin w. zamri.  (2023).  high speed machining of inconel alloys 718 under cryogenic machining of liquid nitrogen.  -

     

    jaharah bt. a ghani;che hassan bin che haron;manal binti ismail;rizauddin bin ramli;wan fathul hakim bin w. zamri.  (2022).  development of a nano-scale mql system to enhance the performance of cutting fluids in machining process.  -

     

    norhamidi bin muhamad;che hassan bin che haron;ahmad kamal ariffin bin mohd ihsan;jaharah bt. a ghani;abu bakar bin sulong.  (2022).  parameter study of metal injection moulding and machining of titanum alloy.  -

     

    wan fathul hakim bin w. zamri;jaharah bt. a ghani;intan fadhlina binti mohamed.  (2022).  mechanical and tribological properties of multilayer coatings with a hierarchical architecture for the metal forming industry.  -

     

    sarani zakaria, aisyah abdul rahman, jaharah a. ghani, zarina abdul latiff, mardina abdullah, abdul munir abd. murad, wan hanna melini wan mohtar, ermy azziaty rozali, mohd hizam hanafiah, kartini aboo talib, mohd aladib samuri, rozainee khairudin, (9).  (2021).  guidelines for conducting oral examination for dissertation/thesis.  - 1-46.