prof. dr. mohd. zaidi bin omar

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan

 zaidiomar@ukm.edu.my

No. rasmi:
UKM : 03 8921 5555



   Biografi/ Biography :


  • saziana samat, mohd zaidi omar, amir hossein baghdadi, intan fadhlina mohamed, ahmad muhammad aziz.  (2021).  mechanical properties and microstructures of a modified al-si-cu alloy prepared by thixoforming process for automotive connecting rods.  - journal of materials research and technology.  1086-1102. 

     

    zainuddin sajuri, nor fazilah mohamad selamat, amir hossein baghdadi, armin rajabi, mohd zaidi omar, amir hossein kokabi and junaidi syarif.  (2020).  cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded aa5083.  - metals.  1-16. 

     

    junaidi syarif, mohammad h. yousuf, zainuddin sajuri, amir hossein baghdadi, mahdi merabtene and mohd zaidi omar.  (2020).  effect of partial solution treatment temperature on microstructure and tensile properties of 440c martensitic stainless steel.  - metals.  1-14. 

     

    fadzilah adnan, zainuddin sajuri, amir hossein baghdadi, mohd zaidi omar.  (2020).  effects of rapid heating and uniaxial loading on the phase transformation and mechanical properties of direct partial remelted butt joint of aisi d2 tool steel.  - materials science & engineering a.  1-12. 

     

    h. hanizam, m.s. salleh, m.z. omar, a.b. sulong, m.a.m. arif.  (2020).  effects of hybrid processing on microstructural and mechanical properties of thixoformed aluminum matrix composite.  - journal of alloys and compounds.  1-12. 

     

    saziana samat, mohd zaidi omar, amir hossein baghdadi, intan fadhlina mohamed, ahmad muhammad aziz.  (2021).  mechanical properties and microstructures of a modified al-si-cu alloy prepared by thixoforming process for automotive connecting rods.  - journal of materials research and technology.  1086-1102. 

     

    roslinda idris, shahrum abdullah, prakash thamburaja and mohd zaidi omar.  (2020).  prediction of fatigue crack growth rate based on entropy generation.  - entropy.  1-22. 

     

    zainuddin sajuri, nor fazilah mohamad selamat, amir hossein baghdadi, armin rajabi, mohd zaidi omar, amir hossein kokabi and junaidi syarif.  (2020).  cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded aa5083.  - metals.  1-16. 

     

    m. a. m. arif, m. z. omar, z. sajuri, m. s. salleh.  (2020).  effects of cu and mg on thixoformability and mechanical properties of aluminium alloy 2014.  - transactions of nonferrous metals society of china.  275-287. 

     

    m.a. abdelgnei, m.z. omar, m.j. ghazali, m.n. mohammed, b. rashid.  (2020).  dry sliding wear behaviour of thixoformed al-5.7si-2cu-0.3 mg alloys at high temperatures using taguchi method.  - wear.  1-12. 

     

    m.n. mohammed, m.z. omar, z. sajuri, and salah al-zubaidi.  (2020).  characterization of metallurgical and mechanical properties of thixowelded aisi d2 and aisi 304 steels.  - journal of materials engineering and performance.  739-749. 

     

    m.a.m arif, m.z. omar & z. sajuri.  (2020).  kebolehbentukan-tikso aloi 2014 dengan penambahan si dan pengurangan cu.  - sains malaysiana.  179-188. 

     

    saziana samat, mohd zaidi omar, intan fadhlina mohamed.  (2019).  high-frequency induction heating of al-si-cu-mg aluminium alloy in thixoforming.  - materials research.  1-13. 

     

    m.a. gebril, m.z. omar, n.k. othman & i.f. mohamed.  (2019).  microstructural refinement and corrosion resistance improvement of heat-treated a356 alloy processed by equal channel angular pressing.  - sains malaysiana.  2749-2757. 

     

    saziana samat, mohd zaidi omar and intan fadhlina mohamed.  (2019).  effect of feedstock geometry on the semisolid processing of al-si-cu-mg alloy.  - materials research express.  1-11. 

     

    m.a. abdelgnei, m.z. omar and m.j. ghazali.  (2018).  wear properties of thixoformed ai-5.7si-2cu-o.3mg aluminium alloy.  - 15th international conference on semi-solid processing of alloys and composites. 

     

    m.a. gebril, m.z. omar, i.f. mohamed, n.k. othman and m.a.h. abdelgnei.  (2018).  corrosion improvement and microstructure evaluation of sem-solid a356 alloy by ecap process.  - iop conf. series: journal of physics: conference series. 

     

    m.n , mohammed, m.z. omar, salah ai-zubaidi, k,s. alhawari, ma abdelgnei.  (2018).  weldability and joining characteristics of aisi d2/aisi 304 steels using semisolid diffusion joining.  - 15th international conference on semi-solid processing of alloys and composites. 

     

    abdullah m.f., abdullah s., omar m.z., sajuri z., risby m.s..  (2015).  analysis of variable strain amplitude response caused by impact loading of carbon nanotube reinforced magnesium alloy az31b.  - procedia engineering.  10-17. 

     

    m.n. mohammed, m. z. omar, j. syarif, z. sajuri, m. s. salleh, k. s. alhawari.  (2015).  semi-solid joining of d2 cold-work tool steel.  - solid state phenomena.  355-360. 

     

    m.a. gebril, m.z. omar, i.f. mohamed, n.k. othman and m.a.h. abdelgnei.  (2018).  corrosion improvement and microstructure evaluation of sem-solid a356 alloy by ecap process.  - iop conf. series: journal of physics: conference series. 

     

    m.a. abdelgnei, m.z. omar and m.j. ghazali.  (2018).  wear properties of thixoformed ai-5.7si-2cu-o.3mg aluminium alloy.  - 15th international conference on semi-solid processing of alloys and composites. 

     

    m.n , mohammed, m.z. omar, salah ai-zubaidi, k,s. alhawari, ma abdelgnei.  (2018).  weldability and joining characteristics of aisi d2/aisi 304 steels using semisolid diffusion joining.  - 15th international conference on semi-solid processing of alloys and composites. 

     

    abdullah m.f., abdullah s., omar m.z., sajuri z., risby m.s..  (2015).  analysis of variable strain amplitude response caused by impact loading of carbon nanotube reinforced magnesium alloy az31b.  - procedia engineering.  10-17. 

     

    m.n. mohammed, m. z. omar, j. syarif, z. sajuri, m. s. salleh, k. s. alhawari.  (2015).  semi-solid joining of d2 cold-work tool steel.  - solid state phenomena.  355-360. 

     

    fariza md sham, ishak yussof, zaidi omar, wan zawiah wan zin @ wan ibrahim.  (2018).  bidang keberhasilan strategik ukm (pelan strategik ukm 2014-2025).  - 67. 

     

    m.s. salleh, m.z. omar, j. syarif.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 24. 

     

    mariyam jemeelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman & shahril mohamad.  (2016).  teknologi di alam melayu.  - 9. 

     

    yuzainee md yusoff, mohd zaidi omar, azami zaharim & abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - Bab 4 : 69-84. 

     

    yuzainee md yusoff, azami zaharim, mohd zaidi omar & abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - Bab 5 : 85-100. 

     

    m.s. salleh, m.z. omar, j. syarif.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 24. 

     

    c.h. azhari, m.z. omar, s. abdullah.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 4. 

     

    mariyam jemeelah ghazali, mohd zaidi omar, che husna azhari, kamarul afizi kosman & shahril mohamad.  (2016).  teknologi di alam melayu.  - 9. 

     

    nuraini khatimin, yuzainee md yusoff, mohd zaidi omar & azami zaharim.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - Bab 3 : 46-68. 

     

    yuzainee md yusoff, mohd zaidi omar, azami zaharim & abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - Bab 4 : 69-84. 

     

    ishak yussof, mohd. zaidi omar, fariza md. sham, wan zawiah wan zin.  (2019).  pelan stategik ukm 2019-2021.  - 49. 

     

    fariza md sham, ishak yussof, zaidi omar, wan zawiah wan zin @ wan ibrahim.  (2018).  bidang keberhasilan strategik ukm (pelan strategik ukm 2014-2025).  - 67. 

     

    che husna azhari, mohd zaidi omar, shahrum abdullah.  (2018).  advances in materials processing and integrity metals and semi-metallics.  - 146. 

     

    mohd zaidi omar, azami zaharim, abdul wahab mohammad.  (2014).  kemahiran kebolehgajian graduan kejuruteraan.  - 131. 

     

    che husna azhari, mariyam jameelah ghazali, andanastuti muchtar, mohd zaidi omar.  (2014).  advances in materials processing.  - 307. 

     

    lilia halim, nurazidawati mohamad arsad, nor aishah buang, kamisah osman, azmin sham rambely, mohd zaidi omar, salwani abdullah, azuraliza abu bakar.  (2020).  intervensi pembangunan website online mentoring: estementoring.  - 1-26. 

     

    zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  -

     

    mohd. zaidi bin omar;che hassan bin che haron;rizauddin bin ramli;wan aizon bin w ghopa.  (2020).  mechanical integrity and machinability of cast and thixoformed al-si-mg novel aluminium alloys.  -

     

    zainuddin sajuri, shahrum abdullah, mohd zaidi omar, mohd radzi abu mansor, wan aizon wan ghopa, azhari shamsudeen.  (2020).  kajian kompetensi kajian kompetensi pekerja terhadap jentera berat (heavy machinery).  - laporan perundingan ukm-niosh.  1-163. 

     

    lilia halim, tuan mastura tuan soh, nurazidawati mohamad arsad, zaidi omar, kamisah osman.  (2019).  mentoring models of stem learning towards a stem learning ecosystem framework.  - the 18th international expo on inventions and innovations.  2.