**Sumber data : e-REP.
   Tarikh kemaskini : 16-03-2017
prof. ir. dr. abu bakar bin sulong

pensyarah universiti

jabatan kejuruteraan mekanikal & pembuatan

No. sambungan :  0389216678

No. rasmi:
UKM : 03 8921 5555



   Biografi/ Biography :
  • Abu Bakar Sulong is Professor at the Dept. of Mechanical and Manufacturing Engineering, UKM. He graduated with a BEng (Hons) in Mechanical and System Engineering from Gifu University Japan, 2001. He then worked as an trainee engineer in SMK Corporation in Ibaraki, Japan for a year followed by as a design engineer in Malaysia for two years. He joined UKM as a tutor in January, 2004. He then continued his studies in March, 2004. In 2008, he received his PhD from Sejong University, South Korea under Advanced Material Processing Lab, Mechanical and Aerospace Engineering Department. He teaches for undergraduate and post graduate of Mechanical Engineering Programme. He served as Editor-in-Chief for Jurnal Kejuruteraan (Journal of Engineering) an indexed ESCI (WoS). Currently, he is deputy director at Center of Research and Instrumentation Management (CRIM). His specializations are in the area of Composite Material Processing and Powder Metallurgy. Currently, he is an active researcher for four research groups in UKM. He has experienced as project and programme leader for grants worth more than RM4.0 million. Based on Scopus data on June 2020, he has 230 published documents, 2626 citations, 30 h-index with nearly 100 manuscripts in Q1 and Q2 journals. He been invited as keynotes, invited talks and speakers at various international and national conferences. He is also a Professional Engineer with Practice under Board Engineer Malaysia (BEM). He also serves as engineering programmes accessor, panel for grants evaluation and committee of professional organizations.

  • nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

     

    nor kamaliana khamis, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad, mohd faizal mat tahir.  (2020).  perbandingan kompetensi dalam akademik dan prestasi dalam projek berkumpulan: satu kajian kes.  - k-novasi 2020.  1-13. 

     

    youping gong, fei wang, m. s. h. al furjan, lijun shan, jingyang he, xiangjuan bian,zhikai bi, haiqiang liu, wenxin li, huifeng shao, guojin chen and abu bakar sulong 4.  (2020).  experimental investigation and optimal 3d bioprinting parameters of sa gel porous cartilage scaffold.  - applied sciences.  1-22. 

     

    al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, najlaa nazihah masood, etta eshak.  (2020).  moldability of nano size zirconia for powder injection molding process by using peg and pmma binders.  - jurnal kejuruteraan.  335-340. 

     

    nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

     

    youping gong, fei wang, m. s. h. al furjan, lijun shan, jingyang he, xiangjuan bian,zhikai bi, haiqiang liu, wenxin li, huifeng shao, guojin chen and abu bakar sulong 4.  (2020).  experimental investigation and optimal 3d bioprinting parameters of sa gel porous cartilage scaffold.  - applied sciences.  1-22. 

     

    nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad and che hassan che haron.  (2020).  effects of high-temperature exposure on the mechanical properties of kenaf composites.  - polymers.  1-13. 

     

    nabilah afiqah mohd radzuan, dulina tholibon, abu bakar sulong, norhamidi muhamad, che hassan che haron.  (2020).  new processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts.  - composites part b: engineering.  1-7. 

     

    farah atiqah abdul azam, nishata royan rajendran royan, nor yuliana yuhana, nabilah afiqah mohd radzuan, sahrim ahmad and abu bakar sulong.  (2020).  fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties.  - polymers.  1-14. 

     

    majid niaz akhtar, sumbal javed, mukhtar ahmad, abu bakar sulong, muhammad azhar khand.  (2020).  sol gel derived mnti doped co2 w-type hexagonal ferrites: structural, physical, spectral and magnetic evaluations.  - ceramics international.  7842-7849. 

     

    al basir, abu bakar sulong, nashrah hani jamadon, norhamidi muhamad, najlaa nazihah masood, etta eshak.  (2020).  moldability of nano size zirconia for powder injection molding process by using peg and pmma binders.  - jurnal kejuruteraan.  335-340. 

     

    nurato, edy herianto majlan, wan ramli wan daud, teuku husaini, masli irwan rosli, abu bakar sulong, darwin sebayang.  (2019).  finite element analysis for stress distribution in a proton exchange membrane fuel cell stack.  - international journal of integrated engineering.  233-240. 

     

    m. a. haque, a. b. sulong, e. h. majlan, k. s. loh, t. husaini, r. rosli.  (2019).  physiochemical characteristics of solid electrolyte membranes for high-temperature pem fuel cell.  - international journal of electrochemical science. 

     

    dulina tholibon, izdihar tharazi, abu bakar sulong, norhamidi muhamad, nur farhani ismail, mohd khairul fadzly md radzi ,nabilah afiqah mohd radzuan, david hui.  (2019).  kenaf fiber composites: a review on synthetic and biodegradable polymer matrix.  - jurnal kejuruteraan.  65-76. 

     

    nabilah afiqah mohd radzuan, abu bakar sulong, mahendra rao somalu.  (2019).  influence the filler orientation on the performance of bipolar plate.  - sains malaysiana.  669-676. 

     

    mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, seong jin park.  (2019).  processing of stainless steel (ss316l)-hydroxyapatite (ha) powder composite through powder injection molding.  - iop conference series: journal of physics: conference series.  1-6. 

     

    tharazi, i., sulong, a.b., muhamad, n., haron, c.h.c., tholibon, d., ismail., n.f., radzi, m.k.f.m., razak, z..  (2017).  optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - advances in material and processing technologies conference, ampt 2017 (procedia engineering). 

     

    tholibon, d., sulong, a.b., ismail, n.f., tharazi, i., md radzi & m.k.f..  (2017).  unidirectional kenaf polypropylene composites: optimization process by two level full factorial.  - 1st international conference on frontiers of composite materials, icfcm 2016. 

     

    amir ariffin & abu bakar sulong.  (2017).  effect of mixing parameters on the mixing time and density of composite ha/ti6al4v feedstock for powder injection molding.  - 1st sriwijaya international conference on engineering, science and technology, sicest 2016. 

     

    mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong & zakaria razak.  (2017).  optimizing injection parameters of kenaf filler polypropylene composite by taguchi method.  - 1st international conference on frontiers of composite materials, icfcm 2016. 

     

    mohd ikram ramli, abu bakar sulong, norhamidi muhamad, andanastuti muchtar, amir arifin, seong jin park.  (2019).  processing of stainless steel (ss316l)-hydroxyapatite (ha) powder composite through powder injection molding.  - iop conference series: journal of physics: conference series.  1-6. 

     

    tholibon, d., sulong, a.b., ismail, n.f., tharazi, i., md radzi & m.k.f..  (2017).  unidirectional kenaf polypropylene composites: optimization process by two level full factorial.  - 1st international conference on frontiers of composite materials, icfcm 2016. 

     

    tharazi, i., sulong, a.b., muhamad, n., haron, c.h.c., tholibon, d., ismail., n.f., radzi, m.k.f.m., razak, z..  (2017).  optimization of hot press parametres on tensile strength for undirectional long kenaf fiber reinforced polylactic-acid composites.  - advances in material and processing technologies conference, ampt 2017 (procedia engineering). 

     

    mohd khairul fadzly md radzi, norhamidi muhamad, abu bakar sulong & zakaria razak.  (2017).  optimizing injection parameters of kenaf filler polypropylene composite by taguchi method.  - 1st international conference on frontiers of composite materials, icfcm 2016. 

     

    mohd yusuf zakaria, abu bakar sulong, norhamidi muhamad & mohd ikram ramli.  (2017).  feedstock preparation of titanium-hydroxyapatite with temporary space holder for powder injection molding.  - advanced processes and systems in manufacturing an international conference 2016.  1-2. 

     

    che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in material processing & integrity - non metals and hybrids.  - 215. 

     

    majid niaz akhtar, abu bakar sulong, muhammad shahid nazir, khaliq majeed, mohd. khairul fadzly radzi, nur farhani ismail & muhammad rafi raza.  (2017).  green biocomposites manufacturing and properties.  - 409. 

     

    che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - 7. 

     

    a.b. sulong, m.n. akhtar, s. ab. karim & c.h. azhari.  (2017).  advances in materials processing and integrity non-metals and hybrids.  - 14. 

     

    majid niaz akhtar, abu bakar sulong, muhammad shahid nazir, khaliq majeed, mohd. khairul fadzly radzi, nur farhani ismail & muhammad rafi raza.  (2017).  green biocomposites manufacturing and properties.  - 409. 

     

    che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in materials : processing and integrity non metals and hybrids.  - 215. 

     

    che husna azhari, abu bakar sulong & rozli zulkifli.  (2017).  advances in material processing & integrity - non metals and hybrids.  - 215. 

     

    che husna azhari, abu bakar sulong, rozli zulkifli.  (2017).  advances in materials processing and integrity non metals and hybrids.  - 177. 

     

    nor kamaliana khamis, abu bakar sulong, zulkhairi zainal abidin, intan fadhlina mohamad, mohd faizal mat tahir.  (2020).  perbandingan kompetensi dalam akademik dan prestasi dalam projek berkumpulan: satu kajian kes.  - k-novasi 2020.  1-13. 

     

    norhamidi bin muhamad;abu bakar bin sulong;zainuddin bin sajuri;zaliha binti wahid;intan fadhlina binti mohamed;farhana binti mohd foudzi.  (2020).  magnetic – non-magenetic layered bi-material through co-powder injection moulding (co-pim).  -

     

    zainuddin bin sajuri;che husna bt. azhari;andanastuti muchtar;rozli bin zulkifli;mohd. zaidi bin omar;shahrum bin abdullah;mariyam jameelah binti ghazali;abu bakar bin sulong;intan fadhlina binti mohamed.  (2020).  development of light weight materials for ballistic applications in tropical climates.  -

     

    abu bakar bin sulong;masli irwan bin rosli;edy herianto;t. husaini.  (2019).  reka bentuk dan pengujian prestasi sel tunggal sel fuel membran elektrolit polimer suhu tinggi (ht-pemfc).  - 1-8. 

     

    masli irwan bin rosli;wan ramli bin wan daud;mohd shahbudin bin mastar @ masdar;abu bakar bin sulong;nur tantiyani binti ali othman;t. husaini.  (2019).  the investigation of fluid behaviour effects in high temperature proton exchange membrane fuel cell.  - 1-5.